RGBlink VENUS X3 Video Wall Processor Quick Start

VIEWSIZE THE WORLD
VENUS X3 Quick Start

Scalable videowall processing for large videowall with
up to 8 displays or more

Card frame videowall processing system available with
6 slots

Integrates easily into a diverse array of 4K
environment such as lobbies and simulation

High speed, dedicated video/graphic bus delivers
real-time performance, each channel up to 4.25 Gbps

Seamless switching between the inputs and display
windows or layers

Multiple cascade to create un-limit real time display
resolution

Upload and display stored images

Output max supports 16 layers operation, and single
output max supports 4 layers
CONTENT
Product Introduction ............................................................................................................................... 3
Packing Configuration ............................................................................................................................ 4
Hardware Orientation .............................................................................................................................. 5
Front Panel ......................................................................................................................................... 5
Back Panel ......................................................................................................................................... 6
Menu Orientation ..................................................................................................................................... 7
Software Operation.................................................................................................................................. 8
Software Installation ........................................................................................................................... 8
Software Operation .......................................................................................................................... 11
Software Operation ................................................................................................................... 11
Connect ..................................................................................................................................... 11
Disconnect ................................................................................................................................ 13
Layout........................................................................................................................................ 13
Basic Operation......................................................................................................................... 15
Windows Setting ....................................................................................................................... 15
Input/Output Settings ................................................................................................................ 17
Data Management..................................................................................................................... 19
Refresh ...................................................................................................................................... 20
Take ........................................................................................................................................... 20
Other ......................................................................................................................................... 21
Screen Show ............................................................................................................................. 21
Power ........................................................................................................................................ 22
Screen Mode ............................................................................................................................. 22
Reset ......................................................................................................................................... 23
1
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Other ......................................................................................................................................... 23
Control Interface........................................................................................................................ 24
Image Processing ..................................................................................................................... 25
Grab/Display Logo .................................................................................................................... 26
Modify the Name ....................................................................................................................... 26
Set ............................................................................................................................................. 27
IP Set......................................................................................................................................... 27
Hot Backup................................................................................................................................ 27
Language .................................................................................................................................. 28
Help ........................................................................................................................................... 28
Information Toolbar ................................................................................................................... 28
Product Application............................................................................................................................... 29
Command and Control Wall Splicing System .................................................................................. 29
Security and Surveillance Wall Splicing System .............................................................................. 30
Executive Conference Room ........................................................................................................... 31
Contact Information............................................................................................................................... 32
2
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Product Introduction
The VENUS X3 is an HDCP-compliant,
create very large display arrays.
scalable, expandable videowall processor
A dedicated, high-speed video/graphic bus
configurable to support a variety of inputs,
maintains real-time performance even under
outputs and windowing capabilities. It features
heavy loading of inputs. Compared with other
high performance video scaling capable of
videowall
producing very high quality images.
extends two main important performance for
The VENUS X3 offers six card cages that
presentation application. One is seamless
support various combinations of input and
switching between the inputs, and the other
output cards for 3G-SDI, HDMI, DVI, VGA,
comes with local control panel option. These
CVBS and USB (for media files play) or video
advantages make the VENUS X3 ideal for all
sources. Hundreds of additional video or
types of surveillance, presentation, and
graphic sources can be input to the VENUS
visualization applications, whether traffic,
X3 using the RGBlink AVDXP Matrix and
security, military, or process control.
processors,
the
VENUS
X3
Router. Multiple Venus X3 can be cascaded to
System Connection
RGBlink offers solutions to
demanding technical problems.
Any application questions, or
required further information,
please contact with our
customer Support Engineers.
VENUS X3 System Connection Diagram
3
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Packing Configuration
Power Cord
USB Cable
Network Cable
DB9 to RJ11
Cable
Foot Pad
Quick Start
Antistatic Bag
Certification
Note: Chinese Standard, American Standard or European Standard power cord is option.
4
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Hardware Orientation
Front Panel
Button Instruction
F1~F3
Custom function button
NEXT
Move next scene button
POWER
Power button
TAKE
Seamless effect switch button
LOCK
Lock front panel button
MENU
Menu and back button
SD Card
SD card insert port
PREVIOUS
Move previous scene button
Touch Screen
Operation
Panel
Support the function menu displaying
and the touch operating, except the
preview outputs.
5
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Back Panel
Chassis Module Structure
1
2 output card slots
4
GENLOCK interface
2
4 input card slots
5
Power module and switch
3
Control interface
6
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Menu Orientation
7
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Software Operation
Software Installation
VENUS X3 video processor is very easy to configure with user friendly communication
software, support drag and drop operation for edit and display.
Double click
to install, system default English version, click “Next” to
next dialog:
User can select “Browse...” to choose the VENUS X3 software install path.
8
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Click “Next” to go on:
Click “Next” to go on:
Click “Install” to go on:
9
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Click “Finish” and ready to run VENUS X3 windows control program.
10
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Software Operation
Software Operation
Connect
Double click the icon
on the desktop. Log in interface will be enter after opening, the
user’s name is admin, and there is no pass word, thus you can enter into the software by
clicking “confirm”.
VENUS X3 communication software interface is shown as follows:
11
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Firstly, click the shortcut key “Search” below “Software Operation”.
Enter to the software interface as below:
Then click “Find Device”, and enter to the software interface as below:
Finally, choose device name, as shown below, then click “Device Link”, and finish connecting.
12
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Disconnect
Click the shortcut key “Disconnect” below “Software Operation” to disconnect the device.
Layout
Double click the shortcut key “Layout” below “Software Operation”.
Enter to the software interface as below:
13
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Output: Choose the output format according to actual need. “Advance Timing” can change
various parameter value of output screen, click “Set” after changing. The software interface
is shown as follows:
Custom: If choose “Custom” in Output, user can set custom resolution.
Genlock: Choose the genlock format.
Input Source: Choose input source HDMI or BNC.
Quick Split Set: Set the split H total, split V total, row and column, the output screen support
14
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
max 2 rows and 4 columns, user can set the width and height of the output screen.
Advance Split Setup: Choose the port, and set X, Y, Width, Height and Rotate.
Basic Operation
Windows Setting
New Window: In output screen zone of controlling software, press the left mouse key and
drag on the intended output screen to cover the whole current screen. And the below
interface will be displayed. A window can be opened by click the shortcut key of “New
Window”
, or double click the left signal source to be shown on the window.
Adjust Window: Two ways can change the size and location of the opened window:
15
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
a. Drag and drop the opened window by mouse. The details are: move the mouse to the
lower right brink of the opened window, when the mouse shows”<—>”, press the left key of
the mouse and drag the window to a suitable size and then release the mouse. Move the
mouse to the opened window and press the left key of the mouse and move the mouse, then
the window will be moved, release the mouse when moved to the suitable location. But this
method can only adjust the size and location roughly, if an accurate adjustment is needed,
the second method can be used.
b. Put the mouse on the window to be adjusted, right click the mouse. Select the “Property”
and the exemplary interface will appear, adjust precisely by “X”, “Y”, Width” and “Height’.
Full or Close Window: Click the icon “
icon “
” at the upper right corner to full cell and click the
” at the upper right corner to full screen. Or put the mouse on the window to be
adjusted, right click the mouse, select the “Full Cell” or “Full Screen”.
When a window needs to be closed, click the icon “
” at the upper right corner, Or put the
mouse on the window to be closed, right click the mouse, select the “Close”. If all windows
need to be closed, click the shortcut key “
”, or put the mouse on any window, right
click the mouse, select the “Close All”.
Hierarchical relations between windows: After creating the windows, the hierarchical
16
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
relations can be changed by the following: click the shortcut key “
” or “
”. Or put
the mouse on the window to be adjusted, right click the mouse, select the “Bring layer to
Front”, “Send layer to Back”, “Layer Forward” or “Layer Backward”, the window can also be
set as BackGround.
Input/Output Settings
: Out Port Set, user can choose any port or choose all ports and set the DE. X, Y,
Width, Height, and choose output mode, output signal, data range and polarity.
: Click the Out Port Swap shortcut key, or put the mouse on the output to be
adjusted, right click the mouse, select the “Outport Swap”, can swap the out ports.
17
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
: The special display project or LED display application would like to require special
resolution settings to meet the requirement. The interface is as follows:
Click any input port, and read or write EDID.
: Show the information of input or output card.
18
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Data Management
: Save the data to the computer hard drive.
: Load the data from the computer.
19
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Refresh
: Refresh the current page.
Take
: Click “Take”, and pop up the window as follows:
Set the alpha time, the adjustment range is 0~10S.
Click “ Advance” in “Take” box, and set the DSK parameters in the dialog, including
preset, mode, alpha and color.
20
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Click “Take” or “Cut” in “Take” box to seamless switch the preview signal to LED display.
If select “Take ON” or “Black ON”, the preview image will seamless switch or black to LED
display instantaneously.
Other
Screen Show
: Output the signal to LED display.
: Output the signal to the monitor, click “Take” or “Cut” in “Take” box to seamless
switch the signal to LED display. If select “Take Out” or “Black”, the preview image will
seamless switch or black to LED display instantaneously.
System default outputs 2.4.6.8 as preview channel and outputs1.3.5.7 as program channel.
21
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Power
: Click “Power Off” icon, the system will prompt “Whether to turn it off”, click “OK” to
close the device.
Screen Mode
: Loop function for the scene, set the the scene play time.
: Stage template select, VENUS X3 version 1.0 can not support this function.
22
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
: Use shortcut key to search all the settings easily.
Reset
: Reset to factory settings.
Other
: Operation permissions settings for manager, log in and set the log password of
windows control program.
: Show the device version information.
: Update the device, and user can clear the log.
23
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Control Interface
Signal Management
Connect the input source, and it will show the output format below “Info”.
Budget Management
Right click the budget name, user can save the settings to budge, or open the saved budget.
VENUS X3 supports 16 kinds of budgets. User can also edit the budget’s name and clear one
page or clear all pages.
24
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Output Channel
One scene support max 8 output screens, the output channel support 16 scenes.
Image Processing
Put the mouse on the signal, right click the mouse, select the “Set Input Property”, user can
choose input port and layer, scale, crop the image, and set the display mode, mirror, color
temp, brightness, contrast, alpha, saturation and sharpness. If image quality distorts by
improper operation, it can be recover by reset.
25
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Grab/Display Logo
Put the mouse on the signal, right click the mouse, select the “Grab/Display Logo”, user can
capture logo. VENUS X3 max supports 10 logos capture. Choose freeze the image when
capture logo. User can choose display or hide logo in the image.
Modify the Name
The device can modify source and scene name, for easy identification and management.
Modify Source Name: Put the mouse on the signal, right click the mouse, select the “Modify
the Name”, input the new name in the dialog.
26
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Modify Scene Name: Put the mouse on the scene, right click the mouse, select the “Modify
Name”, input the new name in the dialog.
Set
IP Set
Users can set equipment IP, mask and gateway, usually used when one computer control
some devices or remote control. It takes effect immediately if users change IP through serial
port, and if change IP through network, it takes effect after reopen the software. If choose
“Auto get ip address”, user need not set the IP.
Hot Backup
User can enable or disable the hot backup function. Choose “ON” to set the backup signal for
Hot Backup 1 to Hot Backup 8. It will switch to the backup signal if interrupt signal.
27
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Language
The software supports both Chinese and English, user can switch the language by “Language”
option.
Help
About: The information of the software version and the company.
Information Toolbar
It shows the serial, device name, software version and serial number in the bottom of the
software interface.
28
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Product Application
Command and Control Wall Splicing System
The following project use VENUS X3 to deal with 11 monitor camera signals and 3 computer signals.
The 11 monitor camera signals include 4 standard definition signals, 4 HD signals, and 3 3G-SDI inputs.
And the 3 computer signals include 2 DVI signals and 1 HDMI input.
The output includes 2 DVI output cards.
One output screen can support max 4 images, and up to 16 images for 8 output screens.
29
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Security and Surveillance Wall Splicing System
In this application, the input signal source includes 24 standard definition CCTV cameras that used to
monitor, 2 satellite TV receiver and 2 computers. The standard definition signal source is connected to a
3 CVBS video input card, and satellite receiver and computer respectively by the mixture of HDMI and
DVI input.
VENUS X3 3U Rack supports 24 inputs and 8 outputs for splicing wall.
30
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Executive Conference Room
In this application, VENUS X3 uses 2 edge fusion cards, and supports 4 edge fusion projectors, create
a seamless display for a large administrative conference room. The 2 edge fusion output cards provide
4 superposition signals for the projector, and create a seamless image by overlap. The 2 3G-SDI input
cards input signals from video conference system, the camera provides real-time product image, and
the HD player provides the enterprise's promotional video. The 3 HDMI input cards receive signal from
the desktop, the laptop and the documents camera. The 1 HDMI input card receive signal from other
configuration such as HDMI adapter. Any combination of signal source can show on anywhere on the
screen at the same time.
31
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
Contact Information
Warranty:
All video products are designed and tested to the highest quality standard and backed by
a full 3-year parts and labor warranty. Warranties are effective upon delivery date to
customer and are non-transferable. RGBlink warranties are only valid to the original
purchase/owner. Warranty related repairs include parts and labor, but do not include
faults
resulting
from
user
negligence,
special
modification,
lighting
strikes,
abuse(drop/crush), and/or other unusual damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter: S603~604 Weiye Building Torch Hi-Tech Industrial Development Zone
Xiamen, Fujian Province, P.R.C
●
●
●
●
Tel: +86-592-5771197
Fax: +86-592-5771202
Customer Hotline：4008-592-315
Web:
~ http://www.rgblink.com
~ http://www.rgblink.cn
● E-mail: [email protected]
32
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn