advertisement
Battery Powered Hand Washing Faucet
u u u u
EBF-85
Description
Battery Powered, Sensor Activated Electronic Hand Washing Faucet for tempered or hot/cold water operation.
Flow Rate
£ 0.5 gpm/1.9 Lpm Vandal Resistant Spray Head
(See Accessories for other Spray Head options)
Specifications
ADA Compliant, Battery Powered, Sensor Activated, Chrome Plated Brass Hand Washing Faucet with the following features:
• Splash-proof Circuit Control Module
• Fiber Optic, Automatic, Self-adaptive Sensing
• Isolated Latching Solenoid Operator, isolates magnetic components from water contact
• Audible Tone Low Battery Indicator
• Serviceable Filtered Solenoid Valve
• Bak-Chek ® Tee for Hot/Cold Supply
• Trim Plate with Anti-Rotation Pin (specify 4” or 8”)
• Vandal Resistant Spray Head with Pressure Compensating Flow Control
• Polypropylene Optic Cable Protection
• Includes four (4) C-size Alkaline Batteries
Variations
(Add suffix to Model Number for inclusion with Faucet)
• Trim Plate (must be specified)
£ -4 Trim Plate for 4” Centerset Sink
£ -8 Trim Plate for 8” Centerset Sink
• Temperature Mixing Valves (optional)
£ ADM Above Deck Mechanical Mixing Valve
£ BDM
£ BDT
Bak-Chek ® faucet.
Below Deck Mechanical Mixing Valve
Below Deck Thermostatic Mixing Valve
Tee not required or provided when a Temperature Mixing Valve is included with the u
Consult Factory for Finish Variations
Accessories
(Specify separately)
• Vandal Resistant Spray Heads
£ ETF-1027-A 2.2 gpm/8.3 Lpm Laminar Flow Spray Head
(recommended for medical applications)
£ ETF-1022-A 2.2 gpm/8.3 Lpm Aerator
• Grid Strainer
£ ETF-460-A Chrome Plated Brass Grid Strainer w/1¼” Outlet Tube
See OPTIMA Accessories Section of the Sloan Catalog for a complete listing of OPTIMA Faucet
Accessories and Variations.
u u u u
Economical
Automatic operation provides water usage savings over other faucet devices. Reduces maintenance and operation costs. Self-adaptive
Range Adjustment makes installation quick and easy. Battery operation ideal for Retrofit installations.
u
ADA Compliant
Automatic
The Sloan OPTIMA Plus ® EBF-85 Battery Powered, Electronic Hand
Washing Faucet operates by means of an adaptive infrared sensor that is linked to the faucet by a fiber optic cable. Once the user’s hands enter the sensor’s effective range, the Solenoid activates the water flow.
Tempered water flows from the Faucet until hands are moved away.
The Faucet then automatically shuts off.
Hygienic
The ultimate in sanitary protection — there are no handles to turn or buttons to push. Helps to control the spread of infectious diseases.
u
Warranty
3 year (limited)
Compliant to:
ASME A112.18.1-2005/CSA B125.1-05
ISO/IEC 17025
Job Name
Model Specified
This space for Architect/Engineer approval
Date
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
The information contained in this document is subject to change without notice.
Optima Plus EBF-85 04-14
EBF-85
Description
Battery Powered, Sensor Activated Electronic Hand Washing Faucet for tempered or hot/cold water operation.
Flow Rate
0.5 gpm/1.9 Lpm Vandal Resistant Spray Head
(See Accessories for other Spray Head options)
ELECTRICAL SPECIFICATIONS
Control Circuit
6 VDC — Operates on four (4) alkaline C-size batteries. Self-adaptive
Range Adjustment, Audible
Troubleshooting and Low Battery
Indicator. Fiber Optic Cable between
Electronic Module and Faucet keeps all electronic signals below the sink.
Battery Life
2 years at 8,000 cycles/month
OPTIMA ® Sensor Range
Nominal: 4”- 5” (102 mm - 127 mm)
Self-adaptive Zone: 2” - 8”
(51 mm - 203 mm) — Faucet selfadjustment range within this zone dependent upon depth and reflectivity of basin.
Solenoid Valve
Low Energy Latching Solenoid with Selfcleaning By-pass and Integral Clean Out
Strainer Filter.
FAUCET DIMENSIONS
(Shown with 4” Trim Plate)
Time Out Adjustment Settings
30 seconds — The Faucet Time out Setting determines the maximum time the faucet will run upon continuous detection. The EBF-85 is factory set at the 30 second time out. Consult factory for time out settings to meet individual application requirements.
Maximum Distance Control Module may be Installed from Spout
30” (762 mm)
OPERATION
1. Continuous, invisible light beams are emitted from the
OPTIMA ® Sensor. Fiber optic cables transmit the light from the circuit to the spout.
2” (50 mm) MAX.
Countertop Thickness
EBF-85 Faucet with Bak-Chek ® Tee for Hot and Cold Water Supply
(shown with 4” trim plate)
2” (50 mm) MAX. MAX.
Countertop Thickness
2. The faucet is activated by placing hands beneath the spray head, thus activating the
Solenoid Valve. Tempered water flows for as long as hands continue to stay within the Sensor’s range (30 second automatic shut off).
EBF-85 Faucet with ADM Variation Mixing
Valve for Hot and Cold Water Supply
(shown with 8” trim plate)
2” 2” (50 mm) MAX.
Countertop Thickness
3. When hands are removed, the water flow automatically stops. The faucet is then ready for the next user.
EBF-85 Faucet with BDM and BDT Variation Mixing
Valves for Hot and Cold Water Supply
(shown with 4” trim plate)
2” (50 mm) MAX.
Countertop Thickness
SLOAN VALVE COMPANY - 10500 SEYMOUR AVE. - FRANKLIN PARK, IL 60131
PHONE: 1-800-9-VALVE-9 - FAX: 1-800-447-8329 http://www.sloanvalve.com
Copyright © 2014 Sloan Valve Company
AIR DELIGHTS, INC. - 11170 SW 5TH STREET, SUITE 100 - BEAVERTON, OR 97005
PHONE: 1-800-440-5556 - FAX: 1-503-643-8224 http://www.airdelights.com - [email protected]
Optima Plus EBF-85 04-14
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project