Axminster FT-1000 Specifications

Add to My manuals
20 Pages

advertisement

Axminster FT-1000 Specifications | Manualzz
Section
Air Filters
Once the dust extractor is turned off, the cutting or sanding finished, off comes the mask and in most instances we think we have been very safety conscious. In fact, until a ray of sunlight passes through
the workshop window we are unaware that a very high level of dust is still present in the air, probably just as much as when the machine or dust producer was in full swing. In order to further improve your
workshop conditions, we offer a range of workshop air filters which may be left running quietly in the background, filtering out the very fine airborne dust particles. Using a two stage filter, the polyester prefilter removes the larger particles whilst the multi-pocket bag filter filters out the very much finer particles. Suitable for ceiling mounting, wall mounting or just ‘stand alone’, these air filters will greatly improve
the workshop environment. In order to specify the correct size filter or number of filters for a workshop, calculate the workshop volume and look to circulate the air some six times per hour.
N.B. Air filters are to be used in conjunction with dust extraction and do not dispel the need for efficient machine extraction.
2
Charcoal filter
Electrostatic pre-filter
Jet AFS-500 Air Filtration System
This is a medium to large workshop filter unit which has the
advantage that it can be positioned anywhere in the workshop,
either on a bench, a shelf or suspended from the ceiling. The unit
is easy to operate and has three speeds simply activated by the
push of a button or by using the convenient remote control. It
should be mounted away from ventilation and heating vents
and is only suitable for non-metallic dust particles. The unit can
be positioned either vertically or horizontally to best utilise the
space available. It is fitted with a pleated cloth main filter and an
electrostatically charged pre-filter. An optional charcoal filter is
available which can (a) neutralise odours and harmful organic
fumes and (b) refresh the air by removing smoke, dust, bacteria,
pollen and other harmful microscopic particles. Supplied with
main filter, electrostatically charged pre-filter and remote
control. For best results leave the AFS-500 running for a few
minutes to clean the air after your machines have been switched
off, or use the built in 2,4 or 8 hour timer options to run the filter
after you leave the workshop.
Inc.vat
Ex.vat
Code
Air Filter 230V
£224.94
£187.45 310483
AFS-500/1000B Electrostatic Filter
£14.94
£12.45 708731
AFS500 Main Filter
£29.94
£24.95 310484
AFS-500/1000B Charcoal Filter
£27.95
£23.29 708734
100
Call 03332 406406
02_Dust Extraction 094_113.indd 100
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95
29/11/2013 10:56
Air Filters
Accessories
As shown on the
Jet AFS-100B
Air Filter Mounting Kit
Ceiling mounting kit for the JET air filtration units consisting of
four lengths of flexible stainless steel wire with screw eyes and
bolt-up crimps.
Inc.vat
Ex.vat
Code
Mounting Kit
£34.96
£29.13 400398
A
A Inner main pleated filter
B Electrostatic filter
2
Perform CCAF
Spare Filters
Original quality replacement filters for the Perform CCAF Air Filter.
Both inner and outer filters available.
Inc.vat
Ex.vat
Code
Replacement Outer Filter
£17.45
£14.54 100102
Replacement Inner Filter
£20.94
£17.45 100103
B
With a powerful Input 200W motor the AFS-1000 B is intended
for the bigger more commercial workshop; it needs a secure
mounting capable of holding a 40kg static load, at least 2 metres
off the ground. The air passes through the electrostatic pre-filter
into the main pleated filter, filtering 98% of all particles 5 microns
in size and 85% of all particles 1 micron in size. The remote control
unit has three settings for the motor speed and three different
time settings of 2 hours, 4 hours and 8 hours, which can be used
to clear the workshop after work has finished for the day. An
optional charcoal filter is available, which will neutralise odours
and harmful organic fumes or particles including pollen. A handy
ceiling mounting kit consisting of 4 lengths of flexible stainless
steel wire with screw eyes and bolt up crimps allows the machine
to be positioned out of the way. Supplied with electrostatic prefilter, main filter and 4 mounting eyes.
Axminster AFS2000 Spare Filters
Original quality spare filters for the Axminster AFS2000 Air Filter.
Outer and charcoal filters available.
Inc.vat
Ex.vat
Code
Outer Filter
£19.94
£16.62 708722
Charcoal Filter
£42.95
£35.79 708721
Jet AFS-1000B
Air Filtration System
AFS1000B Air Filter 230V
AFS-500/1000B Electrostatic Filter
AFS1000B Main Filter
AFS-500/1000B Charcoal Filter
Inc.vat
£294.95
£14.94
£34.94
£27.95
Ex.vat
£245.79
£12.45
£29.12
£23.29
Code
310481
708731
400395
708734
Comparison Chart - Air Filters
AFS-500
Trade
Input 100W
2 Stage
360, 480, 600m³/hr
120m³
Inner-1 Micron, Outer-5 Microns
400 x 610 x 300mm
15kg
Model
Rating
Power
Filtration
Air Movement
Room Volume
Particle Size
Overall L x W x H
Weight
AFS-1000 B
Trade
Input 200W
2 Stage
720, 900, 1,200m³/hr
300m³
Inner-1 Micron, Outer-5 Microns
768 x 610 x 305mm
25kg
Order online axminster.co.uk/extraction
02_Dust Extraction 094_113.indd 101
Axminster CT510(D),
Jet AFS-1000B Main Filters
Spare original quality inner filters for the Axminster CT510, 510D
and Jet AFS-1000B air filtration units.
Inc.vat
Ex.vat
Code
AFS1000B/CT510D Main Filter
£34.94
£29.12 400395
101
29/11/2013 10:57
Section
Chip
Extraction
These extractors are powered by centrifugal fans which draw a large volume of air through the inlet hose and discharge it through the fabric filter bag situated on the top of the machine. The waste falls into the
lower bag which can either be the fabric one supplied or the optional plastic waste sacks, where applicable. Although these machines generate a large volume of airflow the pressure rise is low which makes
them unsuitable for operating with small diameter inlet hoses. A reduction below 3” diameter is not recommended. The mesh size of the filter bag has to be relatively coarse in order to allow the high volume
of air to pass through and thus the extractor is not suitable for filtering out the very fine dust produced by sanding machines. The fine mesh filter bags or cartridge filters available for most of the models will
improve the level of filtration but with some penalty in reduced airflow. Generally suitable for collecting chippings and larger particle size sawdust from machines equipped with 3” or 4” diameter outlets.
Wood Waste Extraction
Not only does the introduction of an efficient dust or chip
extraction system reduce this potential health hazard, but it keeps
the workshop cleaner and generally makes working with wood
in a confined space a much more enjoyable activity. The choice
of the correct type of extractor for any particular application
can be a bit confusing, with apparently conflicting requirements
for collecting different types of waste from a wide variety of
woodworking machinery. For more information regarding the
potential risks of wood dusts, please visit:
http://www.hse.gov.uk/woodworking/index.htm
and
http://www.hse.gov.uk/coshh/industry/woodworking.htm
As an aid to selecting a suitable extractor we have introduced the
following performance rating guide to give a quick indication of
the type of waste that each extractor is designed to handle. If you
are still unsure of suitability please contact our Specialist Sales
Dept on 03332 406406
Extraction Performance Ratings (guidance only)
1 - Chippings only
2 - Chippings and sawdust (with fine filter option fitted)
3 - Chippings, sawdust and sanding dust
4 - Chippings, sawdust, sanding dust and MDF dust
2
Axminster Hobby Series
AWEDE2 Extractor
Axminster Hobby Series
AWDE5002 Extractor
This extractor can be used in small home
workshops for common wood machining tasks
where a higher airflow than provided by a vacuum
extractor is required. A quiet running induction
motor provides plenty of power to extract from
many small workshop machines. The inlet diameter is 100mm(4”),
the outlet into the bag is 125mm(5”) and the airflow is sufficient
to handle the majority of waste likely to be produced by the
home workshop. A useful feature is that it can be used either in
the horizontal position or suspended from a sturdy wall using the
two hanging brackets provided. Hose not supplied. See extraction
hose selection for further details. Please note that this is a
chippings extractor and should not be expected to collect fine
dust. As with all the high volume low pressure airflow machines,
the inlet should not be restricted to below 75mm diameter and
the bag should be emptied regularly. Performance Rating 1
AWDE5002 Dust Extractor 230V
Quick Release 100mm Hose Clip
Inc.vat
£139.94
£5.45
Ex.vat
£116.62
£4.54
Code
501262
210323
A chip and coarse dust extractor for extracting from
saws, planers, spindle moulders, bandsaws and
similar machines in a small workshop. Equipped
with two cloth bags, the top one acting as the filter
and the lower one for collecting the waste. Power
comes from a 750W induction motor equipped
with a no-volt-release switch and emergency stop
button. If required, the cloth collection bag can
be replaced with plastic waste sacks, which can
be more convenient for storage of waste prior to disposal. An
unusual feature of this extractor is the floor sweeping attachment
which fits to the base of the machine, allowing the extractor to be
wheeled around the workshop, collecting waste as it goes. There
is a fine filter bag available for use when collecting medium sized
dust particles, or alternatively, an optional fine dust cartridge filter
can be fitted. (N.B.You must use plastic waste sacks with the fine
filter bag or cartridge filter).
The machine is supplied with an approximately 600mm length of
inlet hose; additional lengths of 100mm hose are available separately.
N.B. this machine uses waste sack size - 560 x 915mm (340068).
AWEDE2 Dust Extractor 230V
560 x 915mm Waste Sack Red (Pkt 10)
Quick Fit Metal Strap to 1140mm(45”)
Fine Filter Bag
Cartridge Filter
Inc.vat
£174.95
£10.44
£6.95
£9.44
£119.94
Ex.vat
£145.79
£8.70
£5.79
£7.87
£99.95
Code
501263
340068
800425
500079
700344
Axminster Hobby Series
FM300BC Extractor
This extractor, with its 1.5kW motor, large capacity
collection bag and twin 100mm hose inlets, will
handle most single workshop machines. Use the
single 125mm inlet or the twin 100mm adaptor
for two smaller machines. The top cloth bag acts
as the filter whilst the lower plastic bag collects
the coarse dust and chippings. Plastic bags allow
a number of bags to be filled and stored ready for
bulk disposal. The extractor’s filtration system can
be upgraded with the addition of the cartridge filter. The solid
connection tube between the impellor housing and collector
creates an efficient air flow system. Castors on the base allow for
easy mobility around the workshop. This is a good, solid, simple
extractor. Lengths of suitable inlet hose are listed under Dust
Extraction Accessories. N.B. This machine uses waste sack size
785 x 1,200mm (501187).
Inc.vat
FM300BC Dust Extractor 230V
£249.95
785 x 1,200mm Waste Sack Yellow (Pkt 10)£15.46
Quick Fit Metal Strap to 1450mm(57”)
£6.95
Cartridge Filter for AWBDE
£144.95
Ex.vat
£208.29
£12.88
£5.79
£120.79
Code
501264
501187
800426
700345
Comparison Chart - Chip Extraction
Model
Rating
Power
Air Flow
Noise Level
Filtration
Hose Diameter
Bag Capacity
Overall L x W x H
Weight
102
AWDE5002
Hobby
0.75kW (230V, 1ph)
840m³/hr @ 100mm
AWEDE2
Hobby
750W (230V, 1ph)
850m³/hr
70dB(A)
30 micron
100mm
37 litres
380 x 1,100 x 410mm
22kg
73dB(A)
30 micron
100mm
57 litres
790 x 370 x 1,530mm
24.5kg
Call 03332 406406
02_Dust Extraction 094_113.indd 102
FM300B
Hobby
1.5kW (230V, 1ph)
2,000m³/hr @100mm inlet
2,500m³/hr @125mm inlet
77dB(A)
30 micron
1 x 125mm or 2 x 100mm
150 litres
920 x 560 x 1,960mm
47kg
FM300SA
Hobby
2.2kW (230V, 1ph)
3,000m³/hr @150mm inlet
UB-801F
Trade
0.75kW (230V, 1ph)
1,000m³/hr
77dB(A)
30 micron
3 x 100mm, 1 x 150mm
200 litres x 2
1,450 x 800 x 2,250mm
58kg
65dB(A) @ 3m
5 micron
100mm
50 litres
700 x 380 x 1750mm
30kg
axminster.co.uk/signup for our exclusive email offers
29/11/2013 10:57
Chip Extraction
Section
Optional
More
“items”
Fineavailable
Filters
online...
axminster.co.uk/itemaddress
Axminster Hobby Series
FM300SA Extractor
The FM300SA is a twin bag chip and coarse dust
extractor, suitable for many machines in the
workshop. It can be connected to up to three
smaller machines via its 3x 100mm connectors
we recommend connecting it to a simple 125mm
metal duct system. An alloy bodied motor drives
a high efficiency impellor fan; the air flow into the
bags is via metal tubes, again creating efficient air
flow. The base has castors for easy mobility around
the workshop. Plastic waste sacks are used, easy to replace and
held with quick release metal straps. Large polyester air filters
are fitted, these can be replaced with two cartridge filters which
upgrade the filtration capability of the machine to be able to
handle sanding machines. Fitted with a 13A plug, but in some
cases will need a 16A supply.
N.B. This machine uses 785 x 1,200mm waste sacks available
in packs of 10 (501187).
Inc.vat
FM300SA Dust Extractor 230V
£329.94
785 x 1,200mm Waste Sack Yellow (Pkt 10)£15.46
Ex.vat
£274.95
£12.88
AWEDE2 Filter Cartridge
Air filter cartridge for the AWEDE2 Extractor. Upgrades the
performance of this extractor, able to handle fine saw dusts as
well as chippings. Simply slots on with a stiff rubber seal. You must
use plastic waste sacks with this filter. Partical size 1 micron.
Inc.vat
Ex.vat
Code
Cartridge Filter
£119.94
£99.95 700344
2
Code
501265
501187
AWEDE/FM300BC/FM300SA Filter Cartridge
Axminster
Trade Series
UB-801F
Extractor
A thoroughly modern design
of dust extractor with many
individual features of note. The
excellent performance comes
from careful matching of the
motor, impellor and housing, resulting in a quietly
efficient machine able to extract chips and coarse
dust from almost all small or medium sized
machinery. An alloy impellor is fitted to reduce the
risk of sparks and the standard filter is of 5 micron
rating. A large capacity plastic waste sack and quick
release straps are included. A clever feature is that
you can divert the input air to a nozzle built into
the base, enabling the machine to be used as a
powered, mobile floor sweeper. Blast gates are fitted onto both
inlet and floor sweep functions. A comfortable tubular handle
and castor wheels are provided for easy mobility. The filtration
performance can easily be upgraded by the addition of the
CK-370Z filter cartridge, available as an optional extra. This is an
excellent addition for those who wish to collect fine dust from
saws or sanders. Easy to keep clean with the side-mounted crank
handle, the extra surface area means that the overall air flow is
not significantly reduced. Overall, a fine, modern extractor for any
trade workshop, or a quality machine for your workshop at home.
Hose not supplied.
Inc.vat
Ex.vat
Code
UB-801F Chip Extractor 230V
£309.95
£258.29 501215
560 x 915mm Waste Sack Red (Pkt 10) £10.44
£8.70 340068
Order online axminster.co.uk/extraction
axminster.co.uk
02_Dust Extraction 094_113.indd 103
Air filter cartridge for the AWEDE, FM300BC and FM300SA chip
extractors. Upgrade the performance of these extractors, able to
handle fine saw dusts as well as chippings. Simply slots on with
a stiff rubber seal. Partical size 1 micron. N.B. 2 Filter Cartridges
required for FM300SA
Cartridge Filter for AWBDE
Inc.vat
£144.95
Ex.vat
£120.79
Code
700345
Axminster CK-370Z Filter Cartridge
An excellent addition to the UB-801F extractor to
upgrade the performance. With a rating of 1 micron it is
able to filter out fine dusts created when machining in
the workshop. Easy to keep clean with a side mounted
crank handle operating an internal paddle. With a large surface area
there is little reduction in air flow, maintaining the performance of
the extractor. Simple to fit with an included mounting flange that
still allows the use of the standard 5 micron filter.
Inc.vat
Ex.vat
Code
CK-370Z Filter Cartridge
£139.94
£116.62 951589
103
29/11/2013 10:58
Section
Chip
Extraction
2
Axminster Trade Series UB-802 Extractor
This ruggedly built, highly efficient extractor is intended for daily workshop use.
With an efficient impellor running in a carefully designed housing and powered by
a 1.5kW motor, it produces more than enough airflow to run either two machines
simultaneously or one large machine such as a big panel saw. A 5 micron filter bag
is complemented by a large plastic waste sack, secured by quick fit metal straps. A
clever feature is the bag hook system, making it easy for one person to fit/replace the
waste sack. With the air inlet facing downwards and offering a choice of 1 x 150mm
or 2 x 100mm inlets it is easy to connect to either a duct system or flexible hoses. Use
for chips or coarse dusts, or, with the addition of the optional CK-500S filter cartridge
upgrade the performance to extract fine dusts. Little air flow is lost due to the large surface area;
a crank handle operated paddle keeps the filter clean. Fitted with castors and a grab handle, this
unit is easily moved around the
Inc.vat
Ex.vat
Code
workshop. Supplied without hose. UB-802 Chip Extractor 230V
£559.94
£466.62 501216
N.B. 16A supply required
785 x 940mm Waste Sack Orange (Pkt 10) £12.44
£10.37 410241
CK-500S Cartridge Filter
£209.94
£174.95 951590
104
UB-802
Trade
1.5kW (230V, 1ph)
2,000 m³/hr @ 150mm
80dB(A) @ 3m
5 micron
150 x 1, 100 x 2
170 litres
960 x 490 x 1,840mm
70kg
Call 03332 406406
02_Dust Extraction 094_113.indd 104
This is a large extractor for trade workshop use. Ideal for connection to a simple
ducted system or for a large individual machine. A high efficiency impellor, running
in a carefully designed housing, produces a large airflow. Robustly built and quiet
running, this unit has twin 5 micron filters and large plastic waste sacks. The bag hook
system makes fitting or replacing the waste sacks a quick and easy task. Both filters
and bags are secured with quick fit metal straps. An adjustable diverter valve ensures
that both waste sacks are filled evenly. Castors fitted to the base allow easy movement
when required. Used as it is, this extractor is best suited for chips and large dusts.
However, you can upgrade the performance by fitting two of the optional CK-500S
cartridge filters. These 1 micron units will handle fine dusts. They are easy to keep clean with a crank
handle operated paddle. Little air flow is lost due to the large surface area. Supplied without hose, this
extractor is a quiet and efficient machine.
N.B. 16A supply required
Inc.vat
Ex.vat
Code
UB-803 Chip Extractor 230V
£699.95
785 x 940mm Waste Sack Orange (Pkt 10) £12.44
CK-500S Cartridge Filter
£209.94
£583.29
£10.37
£174.95
501217
410241
951590
Axminster CK-500S Filter Cartridge
Comparison Chart - Chip Extraction
Model
Rating
Power
Air Flow
Noise Level
Particle Size
Hose Diameter
Bag Capacity
Overall L x W x H
Weight
Axminster Trade Series UB-803 Extractor
UB-803
Trade
2.2kW (230V, 1ph)
3,000m³/hr @ 203mm
88dB(A) @ 3m
5 micron
1 x 203mm, 3 x 100mm
330 litre
1,580 x 490 x 1,850mm
86 kg
An excellent addition to the UB-802 and UB-803 extractors
to upgrade the performance. With a rating of 1 micron it is
able to filter out fine dusts created when machining in the
workshop. Easy to keep clean with a side mounted crank handle
operating an internal paddle. With a large surface area there is
little reduction in air flow, maintaining the performance of the
extractor. Please note, two CK-500S cartridge filters are required
for the UB-803 model.
Inc.vat
Ex.vat
Code
CK-500S Cartridge Filter
£209.94
£174.95 951590
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95
29/11/2013 10:58
Chip Extraction
Section
2
Axminster Trade Series T-2000CK 2hp
Cyclone Extractor
Axminster Trade Series T-2000CK 1hp
Cyclone Extractor
This is a small, highly portable cyclone extractor, aimed at the smaller workshop with many different
types of machinery in use. Having a high efficiency separation system means that the air passing
through the filter is 99% clean of waste, maintaining a high airflow for top performance. The filter has
a 1 micron filtration performance and is fitted with a simple manual cleaning system. A manometer
gauge gives an easy visual performance reference. Large waste bin 105 litres and is easy to remove
and empty. Fitted with sturdy castors, this extractor is quite mobile so is easy to move from machine
to machine. However, with a 150mm inlet it also lends itself to be fitted to a permanent ducting
system. Able to run from a standard 13A plug, it is an attractive proposition for a small trade
workshop or a keen amateur in a home workshop.
Inc.vat
Ex.vat
Code
T-2000CK 1HP Cyclone Extractor
£749.95
£624.96 505087
This larger “Trade” rated extractor is also compact in size and is able to extract from larger, higher
waste volume producing machines. Sharing the same high efficiency air flow system ensures high,
consistent performance. Over 99% of waste is separated from the air stream before the air is passed
through the 1 micron filter; a simple manual filter cleaning system keeps the filter clean. There is a
manometer fitted to give a quick, visual indication of the filter performance. Waste container 155
litres is easily detached from the machine and has castors to allow easy mobility. The machine is fitted
with wheels for mobility, but we would suggest the best way to get the benefit of this machine is to
connect it to a permanent ducting system. The 200mm inlet would allow a multiple ported system to
be used. Quiet and unobtrusive in use, this would be a good choice in many workshops.
N.B. 2 Filter Cartridges required for FM300SA
T-2000CK
Trade
0.75 kW (230V, 1ph)
1,100m³/hr
80 dB @ 3m
3.8m²
1 micron
1 micron
150mm x 1, 100mm x 2
1,300 x 1,100 x 1,560mm
71kg
T-2000CK-HR
Trade
1.5kW (230V, 1ph)
2,300m³/hr
84dB @ 3m
7.4m²
1 micron
1 micron
200mm x 1, 100mm x 2
1,250 x 1,000 x 1,800mm
83kg
Order online axminster.co.uk/extraction
02_Dust Extraction 094_113.indd 105
Inc.vat
£1,099.96
Ex.vat
£916.63
Code
505088
HEPA Filter for T-2000CK Cyclones
Comparison Chart - Cyclone Extraction
Model
Rating
Power
Air Flow
Noise Level
Filter Area
Filtration
Particle Size
Hose Diameter
Overall L x W x H
Weight
T-2000CK 2hp Cyclone Extractor
These optional HEPA cartridge filter’s for the T-2000CK 1 and
2hp Cyclone Extractor’s gives a 0.3 micron filtering performance.
These filter’s are best suited for use when these machine’s are
mainly being used for extracting from sanders or other fine dust
producing machines. Some extra attention paid to keeping the
filter clean will pay dividends for the performance of these filter’s.
Specifications
HEPA Filter for T-2000CK 1hp Cyclone
HEPA Filter for T-2000CK 2hp Cyclone
Inc.vat
£179.95
£259.96
Ex.vat
£149.96
£216.63
Code
505089
505090
105
29/11/2013 10:59
Chip Extraction
2
Jet DC1900A Extractor
Jet DC-950A Extractor
Fitted with an industrial quality motor and specially designed impellor and housing
for high extraction efficiency and quiet, vibration free running. Quick install collection
bags means no straps are required. Four castors allow easy mobility. The 100mm inlet
allows connections to most workshop machines, this extractor will easily cope with a
12” saw or 10 x 6” planer/thicknesser. Rugged design, withstands everyday use. Perfect
for a small workshop, and offers a much better performance than lower cost machines.
Supplied with a pack of five collection bags and a 30 micron filter bag. An optional Fine
Filter Cartridge (700232) will filter out fine saw and sanding machine dusts.
Supplied without a hose.
N.B. This machine uses waste sack size - 560 x 915mm (340068).
Inc.vat
Ex.vat
DC9050-A Dust Extractor 230V
£286.94 £239.12
560 x 915mm Waste Sack Red (Pkt 10) £10.44
£8.70
Code
700231
340068
A high quality chip/coarse dust extractor, for connection to multiple machines or,
ideally, to a ducted system. With an airflow of 2,400 m3/hr it will easily handle 2-3 small
workshop machines or 1 large multiple outlet machine. Robustly built, quiet running
and efficient in design this machine will suit the majority of requirements found in a
typical small carpenter/joinery workshop. Fitted with a high efficiency steel fan and
the unique “Vortex” cone design which maintains a high collection performance by
preventing premature clogging of the filter. This works by separating the waste from
the airflow, diverting the waste into the collecting bags. You can also upgrade the
filtration performance by the addition of two Fine Filter Cartidge’s which will have a
very noticeable effect when the extractor is used on sanding machines. The filter’s
performance is maintained by the use of the internal paddle blade, operated by a
handle on the top of the filter housing. Powered by a 2.2 kW 415V 3ph motor, this is a
compact and very versatile extractor. Supplied with a pack of five collection bags and
a 30 micron filter bag. Supplied without a hose. Please note this machine uses waste
sack size - 785 x 940mm (410241).
Inc.vat
Ex.vat
DC1900A Extractor 415V
£699.95 £583.29
785 x 940mm Waste Sack Orange (Pkt 10) £12.44
£10.37
Code
700389
410241
Comparison Chart - Chip Extraction
DC-950A
Trade
750W (Max Input 1,250W)
230V 1ph
950m³/hr
Model
Rating
Power
Air Flow
Noise Level
Particle Size
Hose Diameter
Bag Capacity
Overall L x W x H
Weight
106
Call 03332 406406
02_Dust Extraction 094_113.indd 106
70dB(A)
30 micron
100mm
58 litres
670 x 355 x 1,440mm
38kg
DC-1100A
Trade
1.1kW (Max Input 1.9kW)
230V 1ph
1,620 m³/hr @ 150mm
1,100 m³/hr @ 100mm
80dB(A)
30 micron
150mm, 2 x 100mm
200 litres
940 x 510 x 1,830mm
71kg
DC1900A
Trade
2.2kW, (Max Input 4.25kW),
415V, 3ph
2,900m³/hr
@ 200mm
80dB(A)
30 micron
3 x 100mm or 1 x 200mm
400 litres
1,500 x 760 x 2,400mm
95kg
axminster.co.uk/signup for our exclusive email offers
29/11/2013 11:00
Chip Extraction
Without the Vortex Cone
– filter gets clogged
reducing performance
and requiring frequent
maintenance.
With the Vortex Cone
– filter stays cleaner
preserving performance
and requiring little
maintenance.
Particle separation technology
that prevents up to 98% of
particles from entering the upper
bag or canister.
2
Performance
Only fine particles move to the filter chamber making manual
cleaning easier and decreasing health concerns.
Prevention
Prevents the central airflow from floating chips into the
filter chamber decreasing rapid performance drop due to
premature clogging.
Efficiency
Chips are better contained for increased packing density
requiring fewer collection bag changes.
Jet DC1100A Extractor
This ruggedly made extractor is designed for extended workshop use. Offering
industrial quality construction and exceptional wood chip and sawdust extraction, it
is large enough for a 300mm planer or many other workshop machines. Fitted with a
high efficiency steel fan and the unique “Vortex” cone design which maintains a high
collection performance by preventing premature clogging of the filter. This works by
separating the waste from the airflow, diverting the waste into the collecting bag. The
base is fitted with castors for total mobility around the workshop. The 150mm inlet is
fitted with a twin branch 100mm adaptor, allowing connection to either one or two
machines. This machine is also available already upgraded to handle finer dusts with
the addition of a 1 micron Fine Filter Cartridge (717141). This makes this already fine
machine even more vesatile. Supplied with a pack of five collection bags and a 30
micron filter bag. Supplied without a hose. Please note this machine uses waste sack
size - 785 x 940mm (410241). May require 16A supply
Inc.vat
Ex.vat
DC110OA Dust Extractor 230V
£349.94
£291.62
785 x 940mm Waste Sack Orange (Pkt 10) £12.44
£10.37
DC1100A Extractor and Filter Package - 230V£584.95 £487.46
Fine Filter Cartridge
for Jet DC1100A or
DC1900A
Optional Fine Filters
Fine Filter Cartridge for Jet DC-950-A
Fine Filter Cartridge for the Jet DC-950A Extractor. Upgrades the
machine to handle fine saw and sanding machine dusts. Simply
clamps on with four hand knobs. Easily cleaned with a crank
handle. Particle size 1 micron.
Inc.vat
£269.94
Micron Filter for DC-950-A
Ex.vat
£224.95
Code
700232
Fine filter cartridge for DC1100
and DK1900A. 1 micron fitration,
when fitted to either machine it
upgrades the performance to be
able to handle fine dusts from
saws and sanding machines.
Has 6 times the surface area of a
standard filter bag. This ensures
no loss of air flow and maintains
performance. Note, two units are
required for the DK1900A model.
Order online axminster.co.uk/extraction
02_Dust Extraction 094_113.indd 107
Code
210045
410241
717141
Micron Filter
Inc.vat
£264.95
Ex.vat
£220.79
Code
700390
107
29/11/2013 11:00
Section Extractors
Industrial
UB-503
UB-505
Axminster Industrial Series
UB-3300VECK Cyclone Extractor
2
Axminster Industrial Series UB2200VECK Cyclone Extractor
This is a mobile cyclone dust extractor suitable
for small to medium sized trade workshops. Able
to handle most types of wood waste except for
the very finest of dusts. With a 200mm inlet this is
very suitable for a ducted workshop system, or if
required, you could connect to two machines using
the included 2 x 100mm adaptor. Nice and quiet
in operation and features automatic filter cleaning
for consistant airflow. A manometer gives a quick,
visual indication of performance. The wheeled
waste bin makes the task of waste disposal easier.
This machine is a great all round extractor, able to
cope with all but the largest machines. Supplied
with 0.2 micron polyester cartridge filter, plastic
collection bag and steel impeller.
N.B. 16A supply required
Inc.vat
Ex.vat
UB-2200VECK Cyclone Extractor 230V £1,649.94 £1,374.95
UB-2200 Drum Waste Sack
£3.44
£2.87
This is a mobile cyclone dust extractor suitable for
the medium to large sized trade workshops. Able
to handle most types of wood waste except for
the very finest of dusts. With a 200mm inlet this
is very suitable for a ducted workshop system, or
if required, you could connect to three machines
using the included 3 x 100mm adaptor. Nice and
quiet in operation and features automatic filter
cleaning for consistant airflow. A manometer
gives a quick, visual indication of performance.
The wheeled waste bin makes the task of waste
disposal easier. This machine is a great all round
extractor, able to cope with even large machines.
Supplied with 1 micron polyester cartridge filter,
plastic collection bag and steel impellor. <
N.B. 16A supply required.
Inc.vat
Ex.vat
UB-3300VECK Cyclone Extractor 230V £1,999.94 £1,666.62
UB-3300 Waste Sack for Filter
£1.96
£1.63
UB-3300 Drum Waste Sack
£4.96
£4.13
Axminster Industrial Series
UB-503 & UB-505 3hp Dust
Extractor
Code
210643
950117
950118
Accessories
Waste Sacks for UB-2200
and UB-3300 Cyclone
Extractors
Replacement waste sacks for the Axminster
UB-2200 and UB-3300 Cyclone Extractors. Sold
singly.
Code
210642
950116
UB-2200 Drum Waste Sack
UB-3300 Waste Sack for Filter
UB-3300 Drum Waste Sack
Inc.vat
£3.44
£1.96
£4.96
Ex.vat
£2.87
£1.63
£4.13
Code
950116
950117
950118
These are a different style of dust extractor suited
to specialist situations. In a cabinet style, they are
quiet in operation, very mobile and completely
self contained. Able to handle sanding dusts due
to the multi piece filter system which has a manual
shaker lever. A new design of impellor combines
high efficiency with very low noise levels. Waste
dusts are collected in a simple tray, easy to remove
and empty. The inlet port can be located on either
side or at the rear for convenience. A silencer can easily be added
to the air outlet to reduce the noise even further. These extractors
are not really suited to machines that produce large quantities of
chips (a planer or thicknesser for example) but would be a great
choice for school Design and Technology rooms, CNC routers,
drum or pad sanders and other specialist machines.
N.B. The UB-503 requires 16A supply and the UB-505 requires
a 16A 3ph supply.
Inc.vat
Ex.vat
Code
UB-503 Extractor 230V
£2,199.95 £1,833.29 501000
UB-505 Extractor 415V
£2,899.94 £2,416.62 501001
Comparison Chart - Industrial Extractors
Model
Rating
Power
Air Flow
Noise Level
Filter Area
Particle Size
Hose Diameter
Overall L x W x H
Weight
108
UB-2200VECK
UB-2200ECK
Industrial
1.5kW (230V 1ph)
2,700m³/hr
74dB(A) @ 3m
3.7m²
0.21 micron
100mm x 2 & 200mm x1
1,250 x 670
1,000
750 x 1,700mm
1,550mm
115kg
131kg
Call 03332 406406
02_Dust Extraction 094_113.indd 108
UB-3300VECK
Industrial
2.25kW (230V 1ph)
3,700m³/hr
78dB(A) @ 3m
6.5m²
1 micron
100mm x 3 & 200mm x1
1,200 x 670 x 2,200mm
179kg
UB-503
Industrial
2.2kW (230V 1ph)
2,500m³/hr
70db(A)
16 bags, 115 x 650mm
2.0 micron
100mm x 2 & 175mm x 1
820 x 760 x 1,750mm
197kg
UB-505
Industrial
3.75kW (415V 3ph)
3,100m³/hr
82dB(A)
16 bags, 115 x 900mm
2 micron
100mm x 3 & 200mm x1
850 x 750 x 2,000mm
230kg
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95
29/11/2013 11:01
Vacuum Extractors
Section
FINE Dust
Extraction - For
Power Tools etc.
Axminster Hobby Series
RDC100H Vacuum Extractor
The RDC100H is a great, entry level workshop
vacuum extractor, just right for the hobby
woodworker working in a small home workshop.
This machine will cope with waste shavings
from most bench top machines and the smaller floor standing
machines, especially bandsaws, circular saws, bench top surface
planers and hand-held power tools (with the accessory power
tool hose kit, 718910). The power head has a grab carrying handle
and is fixed to the drum with a metal quick release strap. Fitted
with a two stage filter comprising a cartridge filter and outer
paper filter this will provide filtration of 1 micron. This machine is
a great alternative to your household vacuum cleaner!
Inc.vat
Ex.vat
Code
RDC100H Vacuum Extractor 230V
£114.95
£95.79 501269
RDC100H Filter Cartridge
£6.95
£5.79 210092
RDC100H Filter Bags Pkt 5
£2.94
£2.45 210091
2
Numatic NV750 Workshop Vacuum Extractor
Numatic 2.9m
Hose, Stepped
Red Reducer
End Cap PACKAGE DEAL
Package deal comprises the Numatic 2.9m Hose, Numatic
Stepped Hose Reducer and the Numatic Reducer End Cap.
Numatic 2.9m Hose
• 2.9m hose for use when extracting from power tools when fitted
with the 610325 stepped adaptor
• Fits all Numatic/Axminster vacuum extractors fitted with a
51mm threaded cuff
Numatic Stepped Hose Reducer
• Connects extraction hoses to a variety of power tools
• Can be trimmed to suit a range of outlet diameters
Numatic Reducer End Cap
• Numatic reducer end cap 100mm - 51mm
• Allows the fitment of the 718085 pwer tool hose to a 100mm
hose or extraction duct
This kit allows almost all small bench top machines or hand held
power tools to be connected to the DC1100A Extractor. With a
2.9m hose and stepped rubber adaptor for easy connection.
Numatic 2.9m Hose, Stepped Reducer
& Reducer End Cap - PACKAGE DEAL
Inc.vat
Ex.vat
Code
£42.95
£35.79
718910
This extractor is light in weight and easily stored under the workbench. The head assembly incorporates a 1,200W “Twinflo” vacuum
motor and is fitted with a “Permatex” filter giving filtration down to 0.5 micron @ 99.99%, with the option of fitting a “HepaFlo” disposable
filter bag if required. As standard, this machine meets the L Class filtration standards but can be upgraded to M Class filtration standards
with the addition of the optional HEPA module (210658). The drum assembly incorporates a 51mm cyclonic inlet connector for large
dust/chips, and a 51mm front entry for use with “HepaFlo” bags.The accessory kit included with the workshop utility vacuum includes a
2.5 metre x 51mm flexible extraction hose with a rubber expanding cuff for linking to most workshop machines up to 58mm dust ports.
A 51mm stainless steel “gulper” crevice tool is provided for general workshop cleaning. A 2.9 metre x 32mm hose and step down adaptor
for connecting to hand operated power tools or small, bench-top machines are low cost accessories. The accessories available enable this
machine to be tailored to your own specific use, providing the best performing machine you could want for your workshop. This machine
is the ideal solution for those requiring something portable and also to handle a large range of extraction tasks, robustly built in heavy
gauge epoxy painted steel, has a 2 year warranty and best of all, it’s designed and made in England!
NV750 Vacuum Extractor 230V
Extraction Hose 2.9m & Adaptor
2.9m 32mm hose
Hepaflo Filter Bags NVM-4BH Pkt 10
HEPA Module
Floor Cleaning Kit
Clip-on Mobility Chassis
Inc.vat
£254.95
£29.95
£19.94
£18.95
£209.94
£79.94
£79.96
Code
702413
718085
210551
211015
210658
600071
210656
Comparison Chart - Vacuum Extractors
Model
Rating
Power
Air Flow
Noise Level
Particle Size
Hose Diameter
Overall L x W x H
Weight
Order online axminster.co.uk/extraction
02_Dust Extraction 094_113.indd 109
Ex.vat
£212.46
£24.96
£16.62
£15.79
£174.95
£66.62
£66.63
RDC100H
Hobby
1,100W
180m³/hr
85dB(A)
1 micron
100mm
400 x 400 x 700mm
10kg
NV750
Trade
1,200W (230V)
150m³/hr
70dB
0.5 micron @ 99.97%
51mm
450mm diameter x 650mm height
11.2kg
109
29/11/2013 11:02
Section Extractors
Vacuum
Numatic NVD750 Workshop
Vacuum Extractor
2
As standard, this machine meets the L Class
filtration standards but can be upgraded to M
Class filtration standards with the addition of the
optional HEPA module (210657). When it comes
to workshop applications coupled with unrivalled
performance, the NVD 750 workshop vacuum
extractor is in a class of its own. Many operational
features are included within the package which will
enable the user to link the extractor to a machine
or hand operated power tool as required. The
head assembly incorporates two 1,200W “TwinFlo”
vacuum motors providing ample power for all but
the most demanding of tasks. A visual flow indicator
is also fitted for monitoring performance. The
extractor is fitted with a red “Filtrex” primary filter
and a secondary “Permatex” filter as standard, with
the option of fitting a “HepaFlo” disposable filter bag
if required, a must when machining MDF. The “Filtrex” filter also
protects the filter system from impact damage from fast moving
larger chips. There is an exhaust blower socket to enable the
exhaust air to be ducted away from the workshop if required. The
10 meter cable set provides all round the workshop use from one
power point. The drum assembly incorporates a 100mm cyclonic
inlet connector, this is the best method of connection for most
tasks. A 100-51mm reducer is provided to enable the 2.9m 32mm
power tool hose to be fitted. The 51mm front entry is used when
you need to use the Hepa Flo collection bags, perfect for the safe
disposal fine or MDF dusts. The accessory kit provided with this
extractor includes a 4 metre x 100mm diameter flexible extraction
hose for linking to most small workshop machines, and a 2.9
metre 32mm hose and step down adaptor for connecting to hand
operated power tools or small, bench top machines. The wide
range of accessories available enable this machine to be tailored
to your own specific use, including a mobility chassis and a floor
cleaning kit. This machine is the best solution for those requiring
something portable and also to handle a large range of extraction
tasks. It is ruggedly made in epoxy painted steel, and is designed
and made in England!
Inc.vat
Ex.vat
Code
NVD750 Vacuum Extractor 230V
£369.95 £308.29 702412
Hepaflo Filter Bags NVM-4BH Pkt 10
£18.95
£15.79 211015
HEPA Module
£224.94 £187.45 210657
Floor Cleaning Kit
£79.94
£66.62 600071
Clip-on Mobility Chassis
£79.96
£66.63 210656
Numatic WMD750 Mk2
Workshop Vacuum Extractor
The WMD 750 wall mounted vacuum extractor
is intended for permanent siting on a load
bearing wall (wall bracket included). The extractor
incorporates many features including a visual flow
indicator and easy disassembly for cleaning and
maintenance. Included is a heavy duty woven
waste sack, attached with a quick release strap,
making waste disposal, quick, easy and clean. The
head assembly incorporates two “TwinFlo” 1,200W
vacuum motors providing ample power for all but
the most demanding of tasks. The extractor is fitted
with a “Filtrex” primary filter and a “Permatrex”
secondary filter as standard, giving L Class filtration
of 0.5 micron @ 99.95%. The “Filtrex” filter acts as
an impact absorber for the main filter as well as
providing primary filtration. The drum assembly
incorporates a 100-32mm cyclonic inlet connector, making this
the perfect solution to many workshop applications. An extra
layer of filtration can be provided by using an open HepaFlo bag
supplied with the machine. Fitted to the front 51mm inlet, it is
best used for power tool extraction. The accessory kit supplied
with this machine includes a 4 metre 100mm extraction hose
with soft rubber cuffs for linking to a ducted system or for direct
connection to most machines. A 32mm hose and stepped rubber
reducer for extracting from handheld power tools are part of the
standard equipment supplied. This machine is ideal for those
where workshop space is tight, or where sanders are a prime
machine in use. The whole machine is very ruggedly constructed
in epoxy painted steel and has a 2 year warranty. Another class
leading British made product. N.B. For those requiring an “M”
Class machine, we now offer this option, 501300.
Inc.vat
Ex.vat
Code
WMD750 Mk2 Workshop Extractor 230V £499.96 £416.63 501299
WMD750 Mk2 “M” Class Extractor 230V £714.95 £595.79 501300
Numatic NVD1500 Workshop
Vacuum Extractor
Large capacity coupled with unrivalled performance
make the NVD 1500 workshop vacuum extractor
“the answer” for today’s workshop requirements. The
head assembly incorporates two 1,200W “TwinFlo”
vacuum motors providing ample power for all
but the most demanding of tasks. The extractor
is fitted with a red “Filtrex” primary filter and a
secondary “Permatex” filter as standard, offering L
Class filtration down to 0.5 micron @ 99.95%, with
the option of fitting a “HepaFlo” disposable filter
bag if required, essential when machining MDF. The
steel drum assembly has a maximum capacity of 50
litres, has 2 carrying grab handles,and incorporates
a 100mm cyclonic inlet connector with a 51mm
- 32mm reducer making this the perfect solution
to most workshop applications. This size drum has
been selected as the largest that can still be easily
handled when full of waste material, anything larger
would present possible problems when requiring
emptying. The accessory kit included with the
workshop vacuum extractor includes a 4 metre
100mm vacuum hose for linking to most workshop
machines and a 2.9 metre 32mm hose and step down adaptor for
connecting to a hand operated power tools or small benchtop
machines. Many accessories are available to tailor this machine
to your requirements, including a HEPA filter module for M Class
filtration performance. This is a rugged and high performing
machine, designed and built in England!
NVD1500 Vacuum Extractor 230V
Floor Cleaning Kit
Inc.vat
£629.94
£79.94
Ex.vat
£524.95
£66.62
Code
702681
600071
Comparison Chart - Vacuum Extractors
Model
Rating
Power
Air Flow
Noise Level
Filtration
Hose Diameter
Bag Capacity
Overall L x W x H
Weight
110
NVD750
Trade
2 x 1,200W (230V)
300m³/hr
79dB
0.5 micron @ 99.97%
100mm + 51mm
35 litres
450mm diameter x 650mm height
12.8kg
Call 03332 406406
02_Dust Extraction 094_113.indd 110
WMD750 Mk2
Trade
2 x 1,200W (230V, 1ph)
300m³/hr
79dB
0.5 micron @ 99.97%
100mm + 32mm
70 litres
500 x 400 x 1,110mm
26kg
NVD1500
Trade
2 x 1,200W (230V)
300m³/hr
79dB
0.5 micron @ 99.97%
100mm + 32mm
50 litres
23kg
axminster.co.uk/signup for our exclusive email offers
29/11/2013 11:02
DowndraftSection
Tables
Accessories
Clear Lightweight
PVC Extraction Hose
Lightweight, double ply PVC wall, encapsulating a spring steel
wire helix. Extremely flexible, can be used where tight curves are
required. Blockages can be easily seen, enhancing the systems
performance. Clockwise spiral.
Clear Hose 51mm x 1M
Clear Hose 63mm x 1M
Clear Hose 63mm x 2.5M
Clear Hose 76mm x 1M
Clear Hose 76mm x 2.5m
Clear Hose 102mm x 1m
Clear Hose 102mm x 2.5m
Clear Hose 102mm x 5m
Clear Hose 102mm x 10M
Axminster Hobby Series
DT-700U Downdraft Table
Very useful when hand sanding, the DT-700U. Of all steel
construction, with a generous 903 x 473mm table size and
protective rubber grommets, quite large items can be placed
onto this downdraft table. Internal baffles ensure equal air
movement over the entire table surface. A high volume extractor
of 1000 m³/hr minimum is recommended rather than a vacuum
type machine. Usefully, it can be stored on one end when not in
use.
DT-700U Downdraft Table
Inc.vat
£159.95
Ex.vat
£133.29
Inc.vat
£10.44
£13.94
£28.94
£15.95
£31.94
£17.94
£43.94
£74.94
£139.94
Ex.vat
£8.70
£11.62
£24.12
£13.29
£26.62
£14.95
£36.62
£62.45
£116.62
Code
505001
505002
505003
505004
200774
200776
200777
200778
505005
Clear Medium
Weight PVC
Extraction Hose
Medium weight, double
ply clear PVC hose. Fully
encapsulated PVC coated
close pitch spring steel wire helix. Moderately flexible, it will
accommodate quite tight curves, certainly anything associated
with woodworking machinery. The inner wall is markedly smooth,
aiding the flow of waste, also being clear any blockages are easily
spotted. Temperature range 0°C to +70°C and able to withstand
quite abrasive materials. Clockwise spiral.
Code
501266
Inc.vat
Clear Reinforced PVC Hose 102mm x 1m £19.94
Clear Reinforced PVC Hose 102mm x 2.5m £44.94
Clear Reinforced PVC Hose 102mm x 5m £86.94
Clear Reinforced PVC Hose 102mm x 10m£159.95
Clear Reinforced PVC Hose 127mm x 1m £24.95
Clear Reinforced PVC Hose 127mm x 2.5m £59.94
Clear Reinforced PVC Hose 152mm x 2.5m £65.94
Ex.vat
£16.62
£37.45
£72.45
£133.29
£20.79
£49.95
£54.95
2
Code
505006
505007
505008
505009
505010
505011
505012
Clear Heavy Duty
PU Extraction Hose
• Polyester-polyurethane wall,
embedded PVC coated spring
steel wire helix
• Moderately flexible with a very
smooth inside surface
• Extremely abrasion resistant and almost penetration proof
• Smooth bore means that the likelihood of blockages occuring
are remote
• Temperature range of -40°C to +100°C
• Perfect for high volume waste producing machines
Axminster Trade Series
FT-1000/1600
Downdraft Tables
Downdraft tables are an excellent method of capturing airborne
dust created when hand sanding items of furniture. Because the
air flow is downwards the dust is naturally drawn towards the
table surface which has a series of hollow rubber grommets all
it to protect other vunerable surfaces. The FT-1000 has a 375W
induction motor driving a large diameter impellor creating an
air movement of 3,060 m³/hr. This air flow is drawn through the
table surface and through a rear upstand inlet along the whole
width of the table. The rubber grommets on the surface protect
the work as well as providing an air gap under the work. Hinged
side upstands can be laid down to allow longer workpieces to
be mounted. There are two pleated filters to capture the dust in
front of the impellor, ensuring clean air returns into the workshop,
Comparison Chart - Downdraft Tables
Model
Rating
Power
Air Flow
Noise Level dB @ 1M
Overall L x W x H
Weight
DT-700U
Hobby
970 x 540 x 250mm
11.5kg
Inc.vat
Clear Reinforced PU Hose 102mm x 1m £24.95
Clear Reinforced PU Hose 102mm x 2.5m £59.94
Clear Reinforced PU Hose 102mm x 5m £114.95
Clear Reinforced PU Hose 127mm x 1m £30.95
Clear Reinforced PU Hose 127mm x 2.5m £72.95
Clear Reinforced PU Hose 152mm x 1m £34.94
Clear Reinforced PU Hose 152mm x 2.5m £83.94
whilst a dust tray in the bottom of the cabinet is easily drawn
out for emptying. The FT-1600 model is simply a large table,
twin motored model, with twin filters as well to allow a much
higher airflow over the bigger table. Perfect for hand sanding or
power sanding all types of timbers, but you should extract from
power sanders at source. Easy to maintain with no tools being
required. Solidly built, these machines provide a cleaner working
environment and will be a boon in a trade workshop.
FT-1000 Downdraft Table 230V
FT-1600 Downdraft Table 230V
Filter for FT-1000/1600
FT-1000
Trade
375W (230V)
3,060m³/hr
70dB(A)
1,060 x 670 x 860mm
110kg
Inc.vat
Ex.vat
£799.94 £666.62
£1,349.94 £1,124.95
£29.94
£24.95
• Semi-rigid hose
• Stays put when bent into shape
• Diameter changes over a range of ±20mm when twisted
• A short length suitably adjusted for diameter can be used to
adapt between hoses and machine outlets of different sizes
• Available in grey with a diameter of 102mm(4”) and increments
of one metre with the hose extended
Hose 100mm x 1m
90 to 110mm Clip (each)
Inc.vat
£32.95
£1.55
Ex.vat
£27.46
£1.29
Code
200797
500480
For more extraction hoses & accessories
visit axminster.co.uk/extractionhose
*SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406
02_Dust Extraction 094_113.indd 111
Code
505013
505014
505015
505016
505017
505018
505019
Stayput Extraction Hose
Code
501227
501228
950380
FT-1600
Trade
750W (230V)
6,100m³/hr
74dB(A)
1,600 x 650 x 900mm
198kg
Ex.vat
£20.79
£49.95
£95.79
£25.79
£60.79
£29.12
£69.95
111
29/11/2013 11:03
Section Accessories
Extraction
Accessories
Numatic Flexible
Extraction Hose Kit
• Lengths of high quality
wire reinforced 100mm hose
• Rubber end cuffs to suit
extraction outlets 100110mm
• Ideal for mobile workshop
chip and dust extractors
Inc.vat
Numatic 4m x 100mm Extraction Hose Kit £69.95
Numatic 2m x 100mm Extraction Hose Kit £39.95
Ex.vat
£58.29
£33.29
Code
211597
501082
Hose Hook
• Keep hoses, ropes and extension leads
stowed away and tidy
• 100mm diameter curve
• Use to support dust extractor hose
• Supplied with three wall plugs and screws
Inc.vat
£1.94
Hose Hook
100mm Dust
Extraction kit
Ex.vat
£1.62
Code
600684
2
100mm Dust Extraction Accessory Kit
This is a useful kit of components that the average woodworker
could well find useful when connecting up his machines to the
extraction system. The contents of the kit are:
2 x 3m lengths of 100mm
diameter flexible hose.
1 x table saw dust hood.
1 x 100mm Y fitting.
10 x 100mm pipe clamps.
4 x 100mm blast gates.
1 x floor sweeper and 1 x
150mm jointer dust hood
Something in here for everyone!
100mm Extraction Kit
Inc.vat
£99.95
Ex.vat
£83.29
Code
410064
A 100mm ducting kit with most items a home woodworker needs
to connect machines to an extractor. Comprising 8 X 910mm
lengths of 100mm clear plastic duct, 2 X T junctions, 2 X 90 degree
elbows, 2 X 45 degree elbows, 3 x blastgates and 16 x joiners. A
pack of 10 wall brackets with screws and wallplugs are included. All
the items are available separately, enabling you to build a system
exactly how you need it. Our other accessories such as the 990053 Y
junction, 500181 Flanged Spigot and 200114 Big Mouth Dust Hood
all fit this kit. Add a 410064 kit and you will get 2 x 3m lengths of
flexible hose as well as a whole host of useful connectors and hoods.
The 510412 Earth Grounding Kit would be worth considering to
protect yourself from possible static build up. Seriously good value
for money, this kit is exactly what the home workshop requires.
Dust Extraction kit
100mm x 910mm clear pipe
Joining Splice
45° Elbow
Wall Clip
Inc.vat
£169.94
£14.94
£2.75
£3.54
£00.95
Ex.vat
£141.62
£12.45
£2.29
£2.95
£00.79
Code
210695
210697
210698
210699
210700
Inc.vat
£54.95
Ex.vat
£45.79
Code
501270
Numatic 63mm Dust Extraction
Kit Attachment
The Numatic vacuum attachment kit has been designed for
use with the Axminster 63mm Dust Extraction Kit. It allows any
Numatic vacuum machine from a “Henry” upwards to be used
to provide the vacuum to this 63mm system. It simply fits into
a DEK “T” junction and provides a threaded connector for the
2.5m double threaded Numatic hose which is part of the kit. This
hose has the 51mm female thread allowing it to be fitted to any
standard Numatic vacuum machine. For the purpose that the
Axminster DEK is intended, even a Henry would provide adequate
air flow and, when used with HepaFlo bags, top grade filtration as
well. Simple to fit and very effective.
63mm Dust Extraction Kit Attachment
63mm Dust Extraction Kit
• Especially for the smaller
workshop
• Ducting package complete
with elbows, blast gates and
adaptors
• 8 three foot lengths of tube
(63mm diameter)
• 4 x tee joints
• 3 x 45° joiners
• 2 x 90° elbows
• 16 x pipe joiners
• 5 x plastic blast gates
• 10 x wall clips
• 100mm to 63mm adaptor
• Additional parts available
separately
Inc.vat
Ex.vat
Code
Dust Extraction Kit 63mm
£94.94
£79.12 410063
915mm Lengths of 63mm Pipe (4 Pack) £29.94
£24.95 410069
90° Elbow for 63mm DEK
£4.44
£3.70 410066
Pipe Joiner for 63mm DEK
£1.85
£1.54 410070
45° Elbow for 63mm DEK
£2.15
£1.79 410065
Tee Joiner for 63mm DEK
£4.44
£3.70 410072
Blast Gate for 63mm DEK
£3.95
£3.29 410067
Securing Clips 63mm (10)
£6.44
£5.37 410068
100mm to 63mm Reducer
£2.64
£2.20 410071
112
Call 03332 406406
02_Dust Extraction 094_113.indd 112
Workshop Metal Ducting Kit
A package of dust and chip extraction metal ducting, enough to
extract from four machines, consisting of:
2 x 2m 150mm Duct
1 x 100mm Fixture Joiners
1 x 150mm 90° Elbow
(pack of 5)
2 x 150-100mm 45° Branch Tee 20 x 100mm Suspension Ring
1 x 150-100mm Reducer
Fixings
3 x 2m 100mm Duct
4 x 150mm Suspension Ring
10 x 1m 100mm Duct
Fixings
2 x 150mm Joiners
4 x 100mm Blast Gates
3 x 100mm Joiners (packs of 5) 5 x 1m x 8mm Threaded Rod
24 x 8mm Threaded Back
2 x 90° 100mm Elbow
Plates
4 x 45° 100mm Elbow
2 x 100-100mm 45° Branch Tee 1 x Duct Tape
Extra or additional components are available from our Metal
Ducting selection, but this kit would be enough for many small
workshops and take the guesswork out of what you may require.
Ducting lengths may be shortened with a metal cutting hack saw.
Keep the design simple and follow these rules:
• Don’t over complicate the system
• Keep transfer duct as large as the extractor will accept
• Keep flexible duct to a minimum length or none at all if possible
• Keep branches joining a duct to 45° maximum
• Fit blast gates to maximise efficiency and balance to the system
Metal Ducting Kit
Inc.vat
£669.95
Ex.vat
£558.29
Code
717045
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95
29/11/2013 11:04
Extraction Accessories
Section
Quick Release
100mm Hose
Fixing Clip
100mm x 910mm Clear Pipe for
100mm Dust Extraction kit
An extra length of 100mm x 910mm clear tube for use with the
100mm wall mounted kit to extend it if required.
Inc.vat
£14.94
100mm x 910mm clear pipe
Ex.vat
£12.45
Code
210697
100mm x 100mm
Joining Splice
for 100mm Dust
Extraction kit
Plastic Blastgates
These handy hose clips
allows the quick changing
of a 100mm dust extraction hose
from one machine to another. Acting
as a large spring and operated by
one hand it could not be easier. Ideal for the hobby woodworker
in a small workshop, now there is no excuse for not using your
extractor. Supplied in pairs.
Quick Release 100mm Hose Clip (Pair)
Inc.vat
£5.45
Ex.vat
£4.54
Code
210323
Aluminium Blastgates
An extra 100mm x 100mm joining splice for use with the
100mm wall mounted ducting kit to extend it if required.
Inc.vat
Ex.vat
Code
Joining Splice
£2.75
£2.29 210698
100mm Wall Clip
for 100mm Dust
Extraction Kit
An extra 100mm wall clip for use with the 100mm wall mounted
ducting kit to extend it if required.
Inc.vat
Ex.vat
Code
Wall Clip
£00.95
£00.79 210700
100mm x 45 Degree
Elbow for 100mm
Dust Extraction kit
An extra 100mm 45 degree elbow for use with the 100mm wall
mounted ducting kit to extend it if required.
Inc.vat
Ex.vat
Code
45° Elbow
£3.54
£2.95 210699
Elbows
This elbow gives a gently rounded
curved bend which produces less
resistance to the air as well as
minimising the risk of blockage.
90° ABS Elbow for 100mm Hose
Inc.vat
£4.85
Ex.vat
£4.04
Code
410258
T Junctions
This T Junction hose ducting accessory
is manufactured from high quality ABS
plastic and is strong with a smooth
internal bore. The outside diameter of
the fitting allow for a snug fit into the
appropriate size of flexible hose and
secured using fixing clips.
ABS T Junction for 100mm Hose
Inc.vat
£5.75
Ex.vat
£4.79
Code
900337
Y Junctions
This Y Junction hose ducting
accessory is strong with a smooth
internal bore. The outside diameters
of the fitting allow for a snug fit into
the appropriate size of flexible hose
and secured using fixing clips.
ABS Y Junction for 75mm Hose
ABS Y Junction for 100mm Hose
Inc.vat
£3.95
£5.64
Ex.vat
£3.29
£4.70
Code
990052
990053
Aluminium blastgates, stronger than plastic and with a locking
screw.
Inc.vat
Ex.vat
Code
Blastgate for 100mm Hose
£7.94
£6.62 340920
Blastgate for 125mm Hose
£9.95
£8.29 200071
Blastgate for 150mm Hose
£11.45
£9.54 200070
Dust Extraction System
Grounding Kit
WARNING
Dust and debris moving inside the plastic extraction hose may
cause a build up of static electricity. This can cause a potential
hazard especially with fine dust. Dust extraction systems are a
great deal safer if properly grounded. This kit contains 12metres
of copper wire and all the necessary adaptors to ground a system.
Inc.vat
Ex.vat
Code
Dust Extraction Grounding Kit
£17.95
£14.96 510412
2
Flanged Spigots
This adaptor has a whole range of uses including making the
hose connections on home-made dust extractor hoods and cowls
from thin section plywood. 100mm adaptor made from ABS
plastic and measures 205mm square.
Inc.vat
Ex.vat
Code
ABS Flanged Spigot for 100mm Hose
£2.24
£1.87 500181
Hose Fixing
Clips
Used for securing hose ends and also for many other applications.
Second to none on exhaust repairs! 510405 is a flexible driver
with a hexagon socket at the end - the quick and safe way to
tighten up your clips, available separately.
Inc.vat
Ex.vat
Code
51 to 70mm Clip (Pkt 3)
£3.05
£2.54 510401
70 to 90mm Clip
£1.25
£1.04 410477
95 to 115mm Clip
£1.55
£1.29 410486
110 to 140mm Clip
£1.74
£1.45 410487
135 to 165mm Clip
£1.94
£1.62 410488
185 to 210mm Clip
£2.15
£1.79 951617
Flexible Clip Driver
£13.44
£11.20 510405
Quick Fit
Hose Fixing
Clips
A simple steel fixing clip with plastic butterfly handle for speed
and ease of use and ideal for most 100mm hose applications.
Especially useful when blockages occur; they can be rectified
immediately without the need for screwdriver or clipdriver.
Inc.vat
Ex.vat
Code
90 to 110mm Clip (each)
£1.55
£1.29 500480
90 to 110mm Clip (Pkt 5)
£6.95
£5.79 500481
50 - 70mm Clip
£1.44
£1.20 211998
70 - 90mm Clip
£1.44
£1.20 211999
110 - 130mm Clip
£1.55
£1.29 950501
Order online axminster.co.uk/extraction
02_Dust Extraction 094_113.indd 113
An important accessory in the installation of any dust extraction
system. Blastgates are fitted into the ducts between the machines
and the dust extractor and can be opened or closed to control
the flow to the various machines. 100mm diameter.
Inc.vat
Ex.vat
Code
Plastic Blastgate for 100mm Hose
£3.05
£2.54 340921
Big Mouth Dust Hood
A large rectangular funnel, 410 x 325mm and 270mm deep
ending in a circular spigot to fit 100mm diameter hose. The Big
Mouth Dust Hood will fit directly onto the Axminster Heavy Duty
Variable Height Dust Extraction Hood (410073), providing a larger
catchment area, or it can be used alone behind a radial arm saw
or other machine with no specific extraction port.
Dust Hood
Inc.vat
£10.74
Ex.vat
£8.95
Code
200114
Floor Sweep
You can either use your extractor in the manner of a vacuum
cleaner, or use a soft brush to sweep the debris into the mouth of
this ABS fitment. Fits onto a 100mm hose.
Inc.vat
Ex.vat
Code
ABS Floor Sweep for 100mm Hose
£6.44
£5.37 510411
113
29/11/2013 11:05
Section Accessories
Extraction
Universal Dust
Port Bracket
This is a very useful device enabling
the secure positioning of a 100mm
extraction hose or dust port in many
different ways. The saddle and hose
clip have a very strong magnetic
mount which can be used alone to
attach to a ferrous metal surface
whilst the supplied clamp can be
used to position the bracket either
vertically or horizontally. Especially
useful for woodturning or bench
work.
Dust Port Bracket
Inc.vat
£14.94
Ex.vat
£12.45
Code
210299
Axminster Bendi-Hoze
2
Bendi-Hoze is an articulated tube 75 mm
diameter by 610mm long. It is designed
to attach to an extractor and can be
adjusted so that the inlet is in the best
position to extract from a lathe, bench
sander, soldering station, power tool etc.
The kit includes a 75mm hose adaptor
and three extraction nozzles. The first
nozzle is a 115 x 90mm funnel, the second
a 115mm round funnel and the third a
narrow vacuum nozzle. An additional
600mm extension hose is available either as an extension or to
use a number of the hose ends at the same time.
Inc.vat
Ex.vat
Code
Bendi-Hoze Kit
£32.45
£27.04 056001
Extension 600mm
£22.94
£19.12 056003
Floor Gulper
Attachment
Gulp up all your shavings and dust with this handy attachment.
Simply connect it to a length of 100mm flexible hose linked into
your workshop extractor and clean up! With a convenient handle
and castor wheels you will whizz round your workshop in no time.
Supplied complete with a blastgate, you can leave this rigged
up permamently. Requires an extractor size of 1,000m³/hr as a
minimum to work effectively, so many small, portable extractors
are quite suitable.
Inc.vat
Ex.vat
Code
Floor Gulper Attachment
£37.94
£31.62 211551
Light Duty
Variable Height
Extraction Hood
A simple dust extraction hood
mounted on an adjustable
height stand. Very useful
for situations where direct
connection to a machine
is not possible, such as
woodturning. Having a robust
ABS hood fastened to a 100mm
diameter metal tube, this is
easily connected to flexible
extraction hose leading from
your extraction system. The
steel stand gives a useful height
range from 750-1,200mm and
has 3 feet, so no wobbles on
your uneven workshop floor! The
hood has an inlet of 320 x 35mm
creating a good airflow, an
extractor of at least 750m3/hour
is recommended. Will not accept
Big mouth dust hood (200114)
Variable Height Extraction Stand
Heavy Duty Variable Height
Extraction Hood
For extracting waste from a lathe or other dust source where
direct connection to the machine is not possible or convenient.
Adjustable in height from 710mm to 1220mm with tilting facility
to enable the collection slot to be positioned at the best possible
angle. The hood is made from cast alloy and the collection slot
measures 300 x 50mm. It is easily connected to 100mm flexible
hose leading to an extractor of around 1,000m3/hr. The 200114
Big Mouth Hood can be fitted in place of the nozzle to give a
410 x 405mm collection area. Extraction from a woodturning
lathe can present problems, using the 200797 100mm Stayput
extraction hose fitted into this nozzle and set up behind the lathe
makes for very efficient extraction.
Inc.vat
Ex.vat
Code
Adjustable Nozzle
£79.96
£66.63 410073
Dust Hood
£10.74
£8.95 200114
114
Call 03332 406406
02_Dust Extraction 094_113.indd 114
Saw Table Dust
Extraction Guard
The Table Saw Extraction Guard provides a two-part solution
to the problem of handling large sheets on a saw bench. Firstly,
it supports the extraction hose clear of the table to allow wide
sheets to pass through uninterrupted and secondly, its 100mm
diameter hose can be connected directly to the extractor to
give a greater airflow and hence more effective extraction. The
guard is intended for use with saws equipped with a right hand
extension table and will extend up to 2 metres, giving clearance
for even the widest of sheet material. The guard is supported
on a tubular steel pillar which stands on the floor alongside the
extension table and secured to it with a bracket and bracing rods.
The method of fitting the bracket to the saw table depends on
the material and construction of the table and there may be some
simple fitting work necessary.
If you are still unsure of suitability please contact our
Specialist Sales Dept.
Extraction Hood
Inc.vat
£159.95
Ex.vat
£133.29
Code
056002
Numatic 2.9m x 32mm Hose
Inc.vat
£26.94
Ex.vat
£22.45
Code
950030
This is a 2.9 metre power tool hose with a 51mm threaded
cuff, to fit the 210616 adaptor cuff. Will also fit all Numatic
vacuum cleaners and extractors. Used with 610325 stepped
rubber reducer, this can be adapted to fit virtually all hand held
power tools with an extraction port or most small bench top
woodworking machines.
Inc.vat
Ex.vat
Code
2.9m 32mm hose
£19.94
£16.62 210551
Heat Shrink
Sleeve
A heat shrink sleeve available in three sizes that can simply be
held in place and shrunk to size with a heat gun. The perfect
solution for odd sized dust extraction outlets. 510162 has a
maximum diameter of 50mm shrinking down to 25mm, 510170
has a maximum diameter of 80mm and shrinks down to 40mm
and the 510109 shrinks down from 100mm to 50mm. All sizes
are at least 100mm long. Full manufacturers instructions for use
available to download.
Inc.vat
Ex.vat
Code
Heat Shrink Sleeve 50-25mm
£3.95
£3.29 510162
Heat Shrink Sleeve 80-40mm
£4.96
£4.13 510170
Heat Shrink Sleeve 100-50mm
£6.95
£5.79 510109
Numatic Stepped Hose Reducer
This is a very useful adaptor for connecting extraction hoses to
a variety of power tools and other small machines. Can be used
as it is or trimmed to length to suit a range of outlet diameters.
Dimensions are: length 160mm, small end internal diameter
22mm, external diameter 30mm, large end internal diameter
38mm, external diameter 45mm.
Inc.vat
Ex.vat
Code
Stepped Hose Reducer
£12.95
£10.79 610325
axminster.co.uk/signup for our exclusive email offers
29/11/2013 11:06
Extraction Accessories
Section
Multiple Stepped
Hose Adaptor
Numatic Power Tool
Extraction Hose
A hose kit comprising 2.9m of 32mm hose and a stepped rubber
reducer. The hose will fit onto any Numatic vacuum cleaner or
workshop extractor whilst the stepped rubber reducer will allow
connection onto almost any hand held power tool and some
small bench top woodworking machines. An ideal solution for
extraction in many circumstances.
N.B. If using with the RDC100 or other 100mm vacuum
extractors the adaptor 210616 will also be required.
Inc.vat
£29.95
Extraction Hose & Adaptor
Ex.vat
£24.96
A stepped ABS hose adaptor with seven
different sizes that can form perhaps two or
more adaptors. Simply cut the section you
require with a fine toothed saw. Diameters
are 25mm, 50mm, 63mm, 75mm, 100mm,
125mm and 150mm (sizes stated are
outside diameter).
Stepped Adaptor
Inc.vat
£3.74
Hose Joiners
A quick and neat way of joining two lengths of hose together. The
hose is secured by fixing clips. Available for 75 or 100mm hoses only.
Ex.vat
£3.12
Code
990091
Joiner for 75mm Hose
ABS Joiner for 100mm Hose
Inc.vat
£2.45
£2.75
Ex.vat
£2.04
£2.29
Code
510028
510029
Code
718085
Soil Pipe
Adaptor
Axminster Dust Extraction
Adaptor 100mm
• Useful adaptor for sawbenches and router tables
• Flanged 100mm adaptor with 62mm inlet
• Accepts standard 100mm and 63mm hoses
Inc.vat
Ex.vat
Adaptor 100mm
£7.94
£6.62
Numatic Reducer End Cap
100mm -51mm
Code
502568
Although soil pipe is frequently utilised for dust extraction
ducting, one problem which often crops up when using it is
that the outer diameter of the soil pipe is some 112mm or
approximately 4.5”. To get around this problem we offer a special
adaptor, 900063, to convert from the soil pipe to a 4” hose. Duct
Tape (410221) can be used to produce a more secure joint.
100mm Soil Pipe Adaptor
Inc.vat
£5.94
Ex.vat
£4.95
2
Code
900063
Numatic reducer end cap 100mm - 51mm. Allows the fitment of
the 718085 power tool hose to a 100mm sized hose or dust tube.
Inc.vat
£13.45
100mm to 51mm Reducer
Ex.vat
£11.21
Code
210616
Hose Reducer 100mm O/D
to 50mm O/D
Hose reducer 100mm OD (94mm ID) to 50mm OD (45mm ID).
Hose Reducer 100mm to 50mm
Rubber Adaptors
Two useful items for connecting small diameter pipes into ducted
systems. The ribbed part plugs into either 4” or 110mm ducting
and either 32mm or 50mm pipes will push directly into the inner
holes. No further fixings should be required.
Inc.vat
£11.95
£13.45
Bung 110mm-32mm
Bung 110mm-50mm
Ex.vat
£9.96
£11.21
Inc.vat
£1.44
510074
Ex.vat
£1.20
Code
200092
510066
Heavy-Duty Dust Extractor
Waste Sacks
Code
341102
341103
We have listed our common waste sacks, together with their
layflat size (that is the width of the bag if laid flat on the floor
i.e. half the circumference). They can be used for general waste
collection as well as for dust extraction. Supplied as a pack of 10.
Inc.vat
Ex.vat
Code
560 x 915mm Waste Sack Red (Pkt 10) £10.44
£8.70 340068
1,065 x 1,370mm Waste Sack Green (Pkt 10) £23.95 £19.96 900243
785 x 940mm Waste Sack Orange (Pkt 10) £12.44
£10.37 410241
735 x 1,190mm Waste Sack Black (Pkt 10) £14.45
£12.04 600223
760 x 1,065mm Waste Sack Blue (Pkt 10) £13.45
£11.21 800345
510072
510073
Hose Reducers
102mm Hose Cuff
This is an easily fitted flexible rubber machine cuff for attaching
hose to machinery. One end has a moulded thread that screws
directly onto our 100mm clear hose, the other end of the cuff is
a snug fit onto a 102-110mm diameter machine extraction port.
Turn the cuff inside out if it does not match your hose spiral. It
makes for an easy connection, and re-connecting the extractor
from one to machine to another as simple as possible.
Inc.vat
Ex.vat
Code
102mm Hose Cuff
£19.94
£16.62 610697
Used for converting one diameter of hose to another. Made from
ABS plastic, with the exception of 510074 which is made from
galvanised steel.
107mm OD / 102mm ID
to 52mm OD / 46mm ID
99mm OD / 94mm ID
to 75mm OD / 69mm ID
127mm OD / 123mm ID
to 100mm OD / 92mm ID
150-125mm
Inc.vat
Ex.vat
Code
£7.50
£6.25
510066
£1.60
£1.33
510072
£2.94
£13.44
£2.45
£11.20
510073
510074
Order online axminster.co.uk/extraction
02_Dust Extraction 094_113.indd 115
Quick Fit Metal Straps
Good strong metal spring clips that can be cut to size to suit the
diameter required. Join two together for larger circumferences.
Inc.vat
Ex.vat
Code
Quick Fit Metal Strap to 1140mm(45”)
£6.95
£5.79 800425
Quick Fit Metal Strap to 1450mm(57”)
£6.95
£5.79 800426
115
29/11/2013 11:07
The most common question asked is what size extractor do I need?
Many manufacturers will state the volume of air required for each
machine in their manual. If not, note the size of the extraction port
and use the chart below
outlet size
50
100
125
150
200
volume of air reqd
200 m³/hr
700 m³/hr
1100 m³/hr
1600 m³/hr
2800 m³/hr
Example: for a single machine with a 100mm port an extractor of a
minimum of 700m³/hr will be sufficient. For multiple machines count
the number of extraction ports per size, multiply the number of each
size by the volume of air required. Then add the results per outlet
size to give you a total volume of air required. This total is for all the
machines operating at the same time. You then must decide which
and how many machines will be used at the same time. Divide the
total volume of air required by this number and add 500m³/hr. Choose
an extractor that gives the airflow required by your calculations. Look
at the main inlet size of the extractor, this is the size of the main duct
to be used. In larger systems the ducting should get larger towards
the extraction unit as more machines that are in use are added to
maintain the correct air speed in the duct. This is very important; if the
airflow is too low a build up of dust and debris will occur and is a fire
and explosion risk. If the air speed is high then the system will be noisy
but there will be no deposits in the ducting. Always use blastgates to
close off airflow to machines that are not in use.
Ducting
2
Available in a variety of diameters to suit all applications. Sections
of duct can be joined together with short joining lengths, which
fit on the inside of the duct. The perfect solution for extraction
systems.
Code
410232
211461
211462
211463
Steel Elbows
Inc.vat
£9.74
£11.94
£17.45
£23.94
£7.44
£8.94
£12.95
£16.94
Ex.vat
£8.12
£9.95
£14.54
£19.95
£6.20
£7.45
£10.79
£14.12
Code
410013
951601
951602
951603
400499
951604
951605
951606
Branch Tee
Branch Tees are the best way to lead off to
a machine from a duct system. Having a
smooth inner surface and a 45° angle there
is no obstruction to the airflow. Also, these
are available in a range of sizes to suit the
duct and machine extraction outlet.
Inc.vat
100mm off 100mm at 45°
£34.45
100mm off 125mm at 45°
£34.96
100mm off 150mm at 45°
£36.46
100mm off 200mm at 45°
£41.95
125mm off 125mm at 45°
£36.46
125mm off 150mm at 45°
£37.45
125mm off 200mm at 45°
£44.45
150mm off 150mm at 45°
£45.95
150mm off 200mm at 45°
£49.45
200mm off 200mm at 45°
£55.50
116
Ex.vat
£28.71
£29.13
£30.38
£34.96
£30.38
£31.21
£37.04
£38.29
£41.21
£46.25
Call 03332 406406
02_Dust Extraction 094_113.indd 116
Basic design
• Keep it simple, don’t over complicate the system
• Keep it straight, ducting runs should all be straight with as few
bends as possible
• Keep transfer duct as big as required by the extractor, this should
get larger towards the extractor
• Keep flexible duct to a minimum. If the machine cannot be
connected to the system by solid ducting only then should
flexible ducting be used for the final connection.
• Keep branches joining the duct to a maximum of 45° When
branches join the main duct ideally they must enter at the side
or the top at an angle of a maximum of 45° towards the direction
of flow.
• Fit Blastgates to maximise efficiency and balance the system
The negative pressure inside the ducting draws air into the system.
Incorrect sizing of the duct, too many bends coupled to lots of
flexible hose induces losses into the system and in badly designed
systems this is akin to leaving the handbrake on in a vehicle.
100mm X 1m Ducting
125mm X 1m Ducting
150mm X 1m Ducting
200mm x 1m Ducting
100mm X 2m Ducting
125mm x 2m Ducting
150mm x 2m Ducting
200mm x 2m Ducting
Inc.vat
£8.45
£10.94
£13.94
£19.94
£16.44
£20.94
£26.94
£39.95
Ex.vat
£7.04
£9.12
£11.62
£16.62
£13.70
£17.45
£22.45
£33.29
Code
410229
951611
951612
951613
410230
951614
951615
951616
A short length of tube used to join two
lengths of ducting together. It fits inside
the duct and can be secured either with duct
tape or short self tapping screws. Pack of 5.
Inc.vat
Duct Joiners 100mm (Pkt 5)
£13.94
Duct Joiner 125mm (ea)
£3.05
Duct Joiner 150mm (ea)
£3.05
Duct Joiner 200mm (ea)
£3.44
Ex.vat
£11.62
£2.54
£2.54
£2.87
Code
410228
951607
951608
951609
Aluminium Blastgates
Code
951618
951619
951620
951621
951622
951623
951624
951625
951626
951627
Blastgate for 100mm Hose
Blastgate for 125mm Hose
Blastgate for 150mm Hose
Reducing adaptors are for stepping down in ducting size, i.e. from
150mm to 125mm. Available in a variety of sizes. These fit inside
the ducting for a smooth air flow.
Inc.vat
Ex.vat
Code
100-80mm
£11.94
£9.95 410083
100-125mm
£11.94
£9.95 410084
150-100mm
£14.45
£12.04 410085
150-125mm
£13.44
£11.20 510074
180-150mm
£20.94
£17.45 951628
200-150mm
£17.94
£14.95 951629
Steel Saw Table
Adaptors
With so many saw tables now with
extraction both under the saw and over
the top on the saw guard, it is often the
case that the top guard extraction point
is never used because there is no easy means of joining in the
smaller hose. Here is a simple answer: two galvanised adaptors
which go in line with the 100mm hose and provide a handy
connection for the top guard hose, either 50mm or 38mm.
Y Junction 100-50mm
Y Junction 100-38mm
Black GP Hose 38mm x 2.5m
Inc.vat
£38.95
£38.95
£20.95
Ex.vat
£32.46
£32.46
£17.46
Code
810353
810352
200783
Suspension Rings
Simple clips to hold the ducting either
suspended from a ceiling or standing out
from a wall. A variety of diameters available.
The clips have an M8 threaded hole. Use M8
threaded plated studding, available in 1m or 3m lengths. Each clip
requires a M8/10 back plate (210502) and M8 studding (410113).
By using studding the ducting can be suspended from the ceiling
at the height required. By using short lengths of studding, ducting
can be mounted directly onto a wall.
Inc.vat
Ex.vat
Code
100mm
£4.94
£4.12 211466
125mm
£4.94
£4.12 211467
150mm
£4.94
£4.12 211468
200mm
£6.14
£5.12 211469
Threaded Plated Studding
Aluminium blastgates, stronger than
plastic and with a locking screw.
To provide a smooth bend
within a duct system. Fits
inside the duct tubing. Use
Fixture Joiners to connect
elbows together.
90° Elbow 100mm
90° Elbow 125mm
90° Elbow 150mm
90° Elbow 200mm
45° Elbow 100mm
45° Elbow 125mm
45° Elbow 150mm
45° Elbow 200mm
Steel
Reducers
Ducting Joiners
Fixture Joiners
A short length tube used to join two
fixtures together. It fits over the outside
of the fixtures (bends , T or Y junctions etc.)
and can be secured either with duct tape,
self-tapping screws or pop rivets. The 100mm comes in
a pack of 5, the other sizes are in packs of 1.
Inc.vat
Ex.vat
Fixture Joiner 100mm (Pkt 5)
£13.94
£11.62
Fixture Joiner 125mm (ea)
£3.05
£2.54
Fixture Joiner 150mm (ea)
£2.94
£2.45
Fixture Joiner 200mm (ea)
£3.35
£2.79
Ducting
Inc.vat
£7.94
£9.95
£11.45
Ex.vat
£6.62
£8.29
£9.54
Code
340920
200071
200070
Twin Bends
90° and 45° twin bends are used when
splitting the system off, i.e. to lead into
another room or to the other side of a
workshop. Offering a smooth air flow
with many advantages over the more usual 90° Tee junction. A
selection of 4 sizes and 2 angles available.
Inc.vat
Ex.vat
Code
100mm 90° Twin Bend
£64.94
£54.12 951630
125mm 90° Twin Bend
£72.95
£60.79 951631
150mm 90° Twin Bend
£83.94
£69.95 951632
200mm 90° Twin Bend
£109.94
£91.62 951633
100mm 45° Twin Bend
£46.94
£39.12 951634
125mm 45° Twin Bend
£49.94
£41.62 951635
150mm 45° Twin Bend
£52.94
£44.12 951636
200mm 45° Twin Bend
£64.94
£54.12 951637
End Cap
End caps are used to seal the end of ducting. Useful
to allow an extension at a later date, or to provide a
permanent seal.
Inc.vat
Ex.vat
100mm
£3.95
£3.29
125mm
£5.04
£4.20
150mm
£5.54
£4.62
200mm
£7.25
£6.04
Code
211476
211477
211478
951610
Used for mounting suspension rings to ceilings or walls.
Inc.vat
Ex.vat
8mm x 1m
£2.45
£2.04
8mm x 3m
£4.44
£3.70
10mm x 3m
£6.24
£5.20
Code
410113
211612
211613
M8 Threaded
Back Plate
Plated back plates for use with all suspension rings. Threaded
M8 and with 2 mounting holes. Use M8 studding to mount the
ducting the appropriate distance from the ceiling or wall.
Inc.vat
Ex.vat
Code
Back Plate
£2.95
£2.46 210502
Manometer 0-5 kPa
A simple 0-5kPa manometer, used to
monitor the air flow within ducting used as
part of a dust/chip extractor system (LEV).
The fitting of a manometer on each “hood”,
e.g. extraction point, is recommended
as a method of daily monitoring of the
system’s performance by the HSE in their
LEV checklist for employers. This unit provides an “at a glance”
monitoring of the system at each extraction point each time it is
used, thus satisfying the requirements under the HSE’s guidance.
These are used by our own Extraction Installation team when
fitting new systems.
Inc.vat
Ex.vat
Code
Manometer, 0-5kPa
£89.94
£74.95 210675
Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95
29/11/2013 11:08
Numatic
Section
Accessories
Numatic NSP 180A
Vacuum Cleaner
Numatic Easy
Ride AiroBrush
The AiroBrush is an exceptional floor nozzle developed to provide
quick and efficient carpet care. The rotary action is especially
effective for the removal of threads and pet hairs. It grooms the
whole carpet and will allow power brush results where uprights
can rarely go. A truly high performance power brush suitable for
the Henry range and other machines with a 32mm pipe fitting.
Inc.vat
Ex.vat
Code
Easy Ride AiroBrush
£44.94
£37.45 702820
This vacuum is a very clever design based on simplicity. Benefiting
from the new NST sound reduction and AutoSave energy
conservation technology, the two stage turbine EcoTwin motor
has two power levels. The HepaFlo filter bags ensure the highest
efficiency suction combined with clean and convenient emptying
when full. The unique caddy on top, provides somewhere for the
cable, tools, duster and polish. This cheerful little vacuum cleaner
will follow you around and make light work of all your cleaning
chores. Powerful enough for industrial use and light enough for
the home user. Made in the UK and having a 2 year warranty for
peace of mind (except tools). Replacement HepaFlo Filter Bags
NVM-1CH available separately.
NSP 180A Cleaner - 230V
Hepaflo Filter Bags NVM-1CH (Pkt 10)
Inc.vat
£94.96
£8.45
Ex.vat
£79.13
£7.04
Numatic 2.9m x
32mm Hose
This is a 2.9 metre power tool hose with a 51mm threaded
cuff will fit all Numatic vacuum cleaners and extractors. Used
with 610325 stepped rubber reducer, this can be adapted to fit
virtually all hand held power tools with an extraction port or most
small bench top woodworking machines.
Inc.vat
Ex.vat
Code
2.9m 32mm hose
£19.94
£16.62 210551
Code
950370
210628
2
Numatic Stepped Hose Reducer
This is a very useful adaptor for connecting extraction hoses to
a variety of power tools and other small machines. Can be used
as it is or trimmed to length to suit a range of outlet diameters.
Dimensions are: length 160mm, small end internal diameter
22mm, external diameter 30mm, large end internal diameter
38mm, external diameter 45mm.
Inc.vat
Ex.vat
Code
Stepped Hose Reducer
£12.95
£10.79 610325
Numatic HVR-200A ‘Henry’
Vacuum Cleaner
Red ‘Henry’ Vacuum Cleaner 230V
Inc.vat
£114.95
Ex.vat
£95.79
Code
702705
Comparison Chart - Vacuum Cleaners
Model
Rating
Power
Container Volume
Air Volume
Noise Level
Suction
Air Flow
Overall L x W x H
Weight
Numatic NSP 180A
Industrial
800W
8L
1,800 litres/min
65dB
2,000mm
340 x 340 x 340mm
5.8kg
The next generation Henry and Hetty, updated and improved
to meet todays stricter requirements. Full TwinFlo
two-stage professional motor giving exceptional
performance; with AutoSave you get 50% Energy
saving - 30% Improved Air Quality - 20% Lower
Noise Level. Every time you switch these machines
on you will automatically start on the economy Lo
setting, only if more power is needed to cope with
extra dirt do you need to push the red switch to
operate in Hi mode. All the favourite attributes of
toughness and ease of use are still there to ensure
long life and exceptional performance. Equally at
home in your house, workshop or carried in the
van for use on site where Henry will swallow your mess with
ease. Hetty is just as tough, and may just add a dash of panache
to proceedings! Features such as a 10mtr cable with re-wind,
stainless steel wand with sturdy tools and hose, a giant Tritex filter
to ensure what goes in stays in, and a 1,200W TwinFlo motor are
all included. The addition of the rubber hose reducer (our part
610325) enables many hand held power tools to be connected,
especially good performance on sanders, circular saws and
planers. The addition of the quilted Microtex filter (610327) when
used with Hepa-Flo filter bags
will upgrade these machines
HVR-200A to the full British Alergy
- Foundation standards. An odour
1,200W suppression filter (610328) is
9 litres also available. Supplied with
2520 litres/min 4 HepaFlo filter bags, 2.5mtr
63dB flexible hose, stainless steel floor
2,600mm wand, floor cleaning head for
42 l/sec hard and soft floors, small brush
340 x 340 x 370mm heads, and a crevis tool ideal
6.6kg for the car!
*SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406
02_Dust Extraction 094_113.indd 117
Numatic Power Tool Extraction Hose
A hose kit comprising 2.9m of 32mm hose and a stepped rubber
reducer. The hose will fit onto any Numatic vacuum cleaner or
workshop extractor whilst the stepped rubber reducer will allow
connection onto almost any hand held power tool and some
small bench top woodworking machines. An ideal solution for
extraction in many circumstances.
N.B. If using with the RDC100 or other 100mm vacuum
extractors the adaptor 210616 will also be required.
Extraction Hose & Adaptor
Inc.vat
£29.95
Ex.vat
£24.96
Code
718085
Ex.vat
£7.04
£12.88
£15.79
£9.13
£20.79
£32.46
Code
210628
211199
211015
211175
702821
610327
Numatic Filter Bags
for Henry & Friends
Genuine Numatic Filter Bags for Henry,
friends and other Numatic vacuums.
NVM-1CH (Pkt 10)
NVM-3AH (Pkt 10)
NVM-4BH (Pkt 10)
NVM-2BH (Pkt 10)
Std Repl Tritex Filter
“Henry” Microtex Filter
Inc.vat
£8.45
£15.46
£18.95
£10.96
£24.95
£38.95
117
29/11/2013 11:09
Section
Numatic
2
Numatic NQS350B-22
Vacuum Cleaner
Numatic NQS250B
Vacuum Cleaner
The NQS250B is perhaps the most rugged small
vacuum cleaner you can get. All steel contruction
with a tough epoxy finish, this machine will
perform quietly, efficiently and effectively for many
years. Features include Hi-Lo power levels, 4-wheel
mobility chassis and Tritex filtration. Supplied with
a full 32mm tool kit with stainless steel tubes this
machine is the reliable vacuum cleaner you have
always been looking for!
Inc.vat
Ex.vat
NQS250B Vacuum Cleaner 230V
£224.95
£187.46
Odour Control Filter (305mm machines) £38.45
£32.04
Hepaflo Filter Bags NVM-1CH (Pkt 10)
£8.45
£7.04
Code
610336
610328
210628
The NVQS350B-22 low noise vacuum is tough... very
tough, this is the model that has proved itself to
outlast the rest in the most arduous of applications.
The all-steel power head is low noise; with 1.200W
TwinFlo’ performance; Hi/Lo power operation and,
in every way, just about as good as you can get,
even down to the Nucable plugged replaceable
cable system and an air blower facility. Filtration is
to the Tritex standard with the added advantage
of giant HepaFlo 15 litre dust bags, and easy, clean
emptying. The all-steel container is mounted on,
but removable from, a rugged wheeled tubular
chassis which really does give it go anywhere
mobility. A full range of 32mm accessories to an equally high
standard is supplied for all cleaning applications.
Inc.vat
Ex.vat
Code
NVQ350 Vacuum Cleaner 230V
£269.95
£224.96 610337
Hepaflo Filter Bags NVM-2BH (Pkt 10)
£10.96
£9.13 211175
Odour Control Filter (305mm machines) £38.45
£32.04 610328
Comparison Chart - Vacuum Cleaners
Model
Rating
Power
Container Volume
Air Volume
Noise Level
Suction
Overall L x W x H
Weight
118
NQS250B
Industrial
1,200W
9 litres
2400 litres/min
56dB
2,600 mbar
340 x 340 x 395mm
8.3kg
Call 03332 406406
02_Dust Extraction 094_113.indd 118
NVQS350B-22
Industrial
1,200W
14 litres
2,400 litres/min
56dB
2,600mbar
395 x 350 x 560mm
11.7kg
NVDQ900-2
Industrial
2.2kW
40 litres
5400 litres/min
66dB
2,000 mbar
800 x 490 x 880mm
25kg
Numatic NVDQ900-2
Vacuum Cleaner
The 900 series sets an entirely new standard in
design and construction of industrial vacuum
cleaners, built by professionals to ensure high
performance coupled with reliability and long
service life.
The use of Structofoam throughout this machine
really makes it as strong as a truck, whilst its
innovative design makes it every bit as easy to use
as smaller machines. Power and performance are to
the full TwinFlo’ specification with a dual 2-stage
primary filter system as standard. The rugged
container is classic Structofoam engineering and
the giant wheels and heavy duty castors provide
excellent mobility and transit even in the most demanding
applications. The standard 38mm (1 1/2”) accessory kit includes
an extra long double swivel hose; stainless steel tubes; 400mm
(16”) Structofoam floor nozzle and additional useful accessories.
NVDQ902 Vacuum 230V
Hepaflo Filter Bags NVM-4BH Pkt 10
Inc.vat
£469.94
£18.95
Ex.vat
£391.62
£15.79
Code
610326
211015
axminster.co.uk/signup for our exclusive email offers
29/11/2013 11:10
Numatic
Section
2
Numatic WV380-2 Wet
or Dry Vacuum Cleaner
Numatic George GVE370-2 Wet
or Dry Vacuum Cleaner
The Numatic George Wet and Dry Vacuum/carpet
Cleaner is supplied with a fully comprehensive tool
kit including a 1.9m Nuflex bayonet hose and 3.0m
Cleantec extraction hose, 3 piece stainless steel
tube set, a combination floor nozzle (for carpets
and hard floors), fishtail ‘see thru’ carpet extraction
nozzle, 300mm dual scrub/wet pick up nozzle,
upholstery ‘see thru’ extraction nozzle, trigger valve
and spray assembly, Tritex filter, round dusting
brush, crevice tool, accessory adaptor, upholstery
nozzle and slide.
Inc.vat
Numatic George GVE370 Vacuum - 230V £229.96
Hepaflo Filter Bags NVM-2BH (Pkt 10)
£10.96
Ex.vat
£191.63
£9.13
The WV-380s are, by design, wet or dry vacuum
cleaners that perform totally without compromise
in either mode. When you want to operate as
a dry machine performance must be as good
as a dry-only machine, with big filters and the
option of giant HepaFlo disposable dust bags
ensuring a high standard of operation. Similarly,
when required for wet work, a quick switch of
the dry filter for the wet float valve and a change
of floor nozzle will give you equally professional
performance and a clean, dry floor at the end of it
all. Extremely ruggedly built, and amply powered
by a 1,200W “Twinflo” motor and supplied with a full wet and dry
floor cleaning kit with stainless steel tubes.
Inc.vat
Ex.vat
Code
Numatic WV380 Vacuum - 230V
£174.95 £145.79 990003
Hepaflo Filter Bags NVM-2BH (Pkt 10)
£10.96
£9.13 211175
With a large capacity coupled with outstanding
performance this vacuum can be used for a
multitude of tasks such as cleaning up flooded
areas, spillages and large amounts of waste debris.
It incorporates two 1,200W “Twinflo” bypass
vacuum motors. A “Permatex” secondary filter is
fitted above the metal float assembly providing a
wet/dry option when in use. Filtration levels can be
further enhanced by adding additional filtration. A
76mm cyclonic entry with 51mm-32mm reducer is
fitted as standard enabling the vacuum to be used
with a multitude of accessories. The stainless steel
drum is fitted with a 32mm dump hose for ease of emptying, and
a heavy duty transit chassis. Each vacuum comes complete with a
38mm kit BB7 as standard.
Inc.vat
Ex.vat
Code
Wet & Dry Vacuum Cleaner 230V
£879.95
£733.29 702712
Comparison Chart - Vacuum Cleaners
Code
500418
211175
Model
Rating
Power
Container Volume
Air Volume
Noise Level
Overall L x W x H
Weight
GVE370-2
Trade
1,200W
15 litres (Dry) - 6 litres (Wet)
2,700 litres/min
73dB
355 x 355 x 500mm
9.5kg
Order online axminster.co.uk/extraction
02_Dust Extraction 094_113.indd 119
Numatic NTD 2003-2 Wet
& Dry Vacuum Cleaner
WV380-2
Industrial
1,200W
15 litres (Dry) - 9 litres (Wet)
2,700 litres/min
66dB
355 x 355 x 510mm
8.6kg
NTD 2003S
Industrial
2 x 1,200W
80 litres
2,500mm
80 litres/sec
560 x 660 x 1145mm
30.5kg
119
29/11/2013 11:11

advertisement

Related manuals

Download PDF

advertisement