AIPTEK Monet digital photo frame User manual

Foreword
Many thanks for buying this product. We have invested much time and effort in its
development in order that you may enjoy many years trouble-free with your digital
photo frame.
Safety Notice
1. Do not drop, puncture or disassemble the digital photo frame, otherwise the
warranty will be voided.
2. Avoid all contact with water and dry hands before using.
3. Do not expose the photo frame to high temperature or leave it in direct sunlight.
Doing so may damage it.
4. Use the photo frame with care. Avoid pressing hard on it.
5. For your own safety, avoid using the photo frame when there is a storm or
lightning.
6. Use only accessories supplied by the manufacturer.
7. Keep the photo frame out of the reach of infants.
Environment
Do not throw the appliance away with the normal household
waste at the end of its life, but hand it at an official collection point
for recycling.
By doing this you will help to preserve the environment.
1
Getting Started
Monet is an easy-to-use digital photo frame. It makes it possible to show high
resolution photos and films, play MP3 as mood music and combine different photos
to a slideshow. It supports USB Flash drive, CF, SD, MMC and MS Pro.
Package content
8” digital photo frame
Frame Stand
z AC to DC Switching Power Adapter
USB cable ( to PC) x1
USB cable ( to Pen Drive) x1
z
z
z
User Manual
Software CD
Buildup
Before you can start using the digital photo frame you have to fix the stand and
connect the photo frame with the provided power supply to a power point.
Using memory cards
Additionally to the already existing Internal memory you can use different Memory
cards as well as USB sticks. The photo frame is compatible with USB Flash drive,
CF, SD, MMC and MS Pro. Just put the memory card into the card port at the
buttom of the device.
Open
protected
2
Front Panel
1.
2.
3.
4.
5.
Screen
Adorning
Front frame
Stand
Front-rear frame button
Rear Panel
6. Esc button
7. Enter button
8. Speaker
9. Circle button
10. Power LED
11. Power/LED switch
Bottom Panel
12. USB port
13. DC 5V jack
14. CF card port
15. SD/MS Pro/MMC port
3
After Power on
Before powering on, make sure the power adapter is correctly plugged in
and the photo frame switched on.
After powering on, the Start interface shown on screen is according to the
“StartUp Set” setting. User can choose calendar, picture, music, movie, file list in
the start up interface.
The factory default setting is “Picture”. When the “Picture” setting is selected, the
photo frame will automatically start picture slide show from the memory card /USB
stick or NAND.
When the “StartUp Set” setting is “Music”, the photo frame can automatically play
the audio file from the memory card /USB stick or NAND after powering on
When the “StartUp Set” setting is “Video”, the photo frame can automatically play
the video file from the selected memory card /USB stick or NAND after powering
on
When the “StartUp Set” setting is “PlayList ”, the photo frame will automatically
enter the filemanager screen after powering on
When the “StartUp Set” setting is “calendar”, the start up screen will show the
calendar (Fig. 6.1). Press the ENTER button in calendar mode and the photo
frame will enter the card interfaceΰFigure 6.2).
Figure 6.1
4
Figure 6.2
5
Functions of the digital photo frame
On the following pages the different functions and menus of the photo frame will
be presented.
When you choose a memory card or USB or NAND memory and press “ENTER”,
the function selection screen will display.
(1). Image
(2) Music
(3). Movie
(4). File manager
(5) Setup
Use the Circle button (left & right) to shift between items, and then press ENTER
to confirm the selection. Use ESC button to stop an automatic slideshow.
6
z
The Setup
Next you should make yourselves familiar
with the possible settings. Select the Item
"Setup" and confirm your choice with the
ENTER button.
The following window will appear now and
you can see the options mentioned below.
At the function select interface, press the Circle button leftward to select the
“Setup” item, and then press the ENTER button to enter the system setup menu.
ΰfigure 6.20α.
Figure 6.20
At the Setup interface use below buttons’ definition to operate.
Circle button (Up & Down): shift between items or choose parameters.
Circle button (right) or “ENTER” button: ENTER the selected item, confirm
the setup result.
Circle button(left) or “ESC” buttonΚ Back to the up-level item/the previous
picture or forward to the next picture.
The setup icons are shown as belowΚ
-----------------------------------------------------------------------------------------------------Κ Language set.
Κ Picture setup, it includes “slide show mode”, “picture play mode” two
items. In the item “slide show mode” user could set the speed of the slide show, it
7
includes “Fast” “Middle” and “Slow”. In the item “t picture play mode”, it includes
13 effects of the slide show.
Κ Clock set: Circle button (left & right) to shift between items; Circle button
(Up & Down) to change digits.
Κ Alarm setup: The photo frame has 3 rings in system, in alarm setup, it
has two modes, “once” and “every day”
Κ Start Up Set: Up start interface. User could setup image, music, movie,
file list and calendar as start interface, default setting is picture.
Κ Video set: To setup Screen brightness, contrast and color setups.
Κ Default setup: Recover the factory default setup.
Κ Display current firmware version.
8
z
The image menu
When you select Image and press “Enter”, you will have an overview about the
available photos. With the circle button and the ENTER button you can select any
photo to start the slideshow on the complete size of the display by pressing
“Enter”.
During display picture, through Circle button(left & right) to display the previous
picture or the next picture; Circle button(Up) open the brightness menus of screen
ΰfigure 6.5aα, Circle button(Down) open volume menuΰfigure 6.5bα, then use
Circle button(left & right) adjust parameters. Press “ENTER” button to save
parameters, press “ESC” button to close the menu (not save parameters), it also
will be closed in 5s if no operation.
(a)
(b)
Figure 6.5
If you push the ENTER button again, you can make different settings for the
photo.
Figure 6.6
9
The functions of picture control bar are shown as below figure 6.7.
Rotate
Zoom
Previous
Stop
Status
Show file info
Picture
resolution
Next
View 3ͪ3
Figure 6.7
Press STOP key at control bar back to function select interfaceΙPress “ESC”
button at picture view menu back to 9-picture thumbnail.
While picture control bar shown, Press Circle button(Up and down)to switch music
control bar and picture control bar , user could press “ENTER” to play back music
when display pictures. Press “ESC” button to close the menu, it also will be closed
in 10s if no operation.
Status
Time
Stop
Previous
Fast backward
Fast forward
file info
Play/Pause
Next
ID3 tag
Play mode
When you press “ESC” button again and again to back to “Function Select” Menu,
you also STOP the picture slideshow and music functions.
10
z
The music menu
The next icon you see is the music part. To listen to your favorite music in a media
player, select the icon with the circle button and confirm your selection with the
ENTER button.
You will see the following window.
System search music files in the current memory equipment and play them
automatically. During music playing, uses the control bar to perform control
operation, the functions are shown as figure 6.9. Press Circle button(right)to move
the option to “play mode” ,there are three modes in this option, “standard”,
“ repeat one” and “dir. repeat”, press “ENTER” to choose one of them.
previous
Stop
time
Fast backward
Fast Forward
File info
status
Figure 6.9
Press Play/pause
Circle button(Up) to close control bar, press Circle button(Up) or “ENTER”
Play mode
ID3 tag
button to open control bar again.
Press Circle button (Down) to open Volume menu. Circle button (Left & Right) to
adjust the volume, press “ENTER” button to save parameters, press “ESC” button
to close the menu(not save parameters).
11
Figure 6.10
Press “ESC” button or press STOP key back to function select interface at control
bar.
12
z
The movie menu
To get to this menu choose the icon movie and confirm with the ENTER button.
The system will search the video files in the current memory equipment and play
them automatically. During movie playing, press Circle button(Up) to open the
volume menuΰOperation as same as 1-1α. Press “ENTER/ESC” button to
open/close video control barΰfigure 6.11α.
Figure 6.11
The video control bar is shown as figure 6.12. While the control bar is active,
you can use the Circle button (left & right) to shift between function items. When
the “Function switch” item is highlighted, you can use the Circle button (left & right)
to switch between “subtitle on/off”, “video format information” and “play mode”.
When “play mode” is being selected, you can press ENTER to switch between
“standard play”, “repeat one” and “dir repeat” options.
Fast backward
Previous
Time
Fast forward
Show file info
Stop
Status
Next
Play/pause
Zoom
Function switch
Figure 6.12
Press “ESC” button or press STOP key back to function select interface at control
bar.
NOTE: To ensure the fluency of video play back, the max bit-rate of the video is
8Mbps, and the max resolution of the video is 720*560.
13
z
The Filemanager
The item before last is the Filemanager item.
After use Circle button (Right) to choose memory equipment, press
“ENTER” button or Circle button (Right to view the contentΰfigure 6.14α,
picture files could preview on the right side. If a folder has both picture
and music, when display picture, the music will play.
Figure 6.14
You can select files at the files for delete or copy .files at the list.
14
Select files :
Use Circle button (up & Down) to shift cursor to target fileΔpress Circle button
will appear the selected symbolϘ ϙ
ΰfigure6.15α
Δpress Circle button (right) again to cancel the selection.
(right) the left of file name
User can choose multi-files to operate. (Figure 6.16)
Figure 6.16
Delete : After you select file, long press “ENTER” button to open operation
menu.ΰFigure 6.17α.Press Circle button (up & Down) and shift cursor to icon
Δpress “ENTER” button to confirm, the selected files will be deleted.
ΰfigure 6.18α Press “ENTER” button return to file management menu.
15
Figure 6.17
Figure 6.18
Copy fileΚ After you select file, shift to the target folder and press
“ENTER” button to open file management menu, long press “ENTER”
button to open operation menu. and Press Circle button (up & Down) to shift
iconΔthe selected file will be copy to the target folder
cursor to
ΰfigure 6.19α. If the space of the memory device is not enough, error
information will be shown, copy operation unsuccessful.
16
Technische Daten / Specifications
Model Code
LCD Display
LCD Display
Resolution
800RGB x 480
Aspect ratio
16:9
Format
Photo Playback
function
Video Playback
Audio Playback
12M
Auto slide show
Yes
function
With time, calendar & alarm clock
Alarm voice
Can use MP3 music to set up (in May FW)
Calendar picture
Can change by user (in May FW)
Format
720 x 560
Format
MP3, WMA
Background music
Supported
Speaker
Stereo
Flash 16MB
Yes
CF Card
Max. card capacity 2GB
SD/MMC Card
Max. card capacity 2GB
MS Pro Card
Interface
MJPEG, MPEG-1 ΰ *.mpg,*.mpeg,*.dat α MPEG-2
ΰ*.mpg,*.mpegα
ΔMPEG-4ΰAVI file of divx or xvid codeα
Max. resolution
USB Flash drive
Power Supply
JPEG(YUV Code)
Max. resolution
Internal memory
Memory Support
8-inch TFT LCD, 158 x 99.36mm
Max. card capacity 2GB,
AC Input
110-240V +/- 10%, 50/60 Hz
Power Consumption
5V, .8A
Operating Button
4-way navigating button, Esc, Enter, LED
(To be confirmed)
Blue LED Light
On/Off, optional
USB
USB 1.1, flash drive plug-and-play, as master mode
USB 2.0, when connected to PC, as slave mode
17