TRENDnet TFC-1000 MSC, S20, S50, S70, S10D3, S10D5 Fiber Converter Quick Installation Guide

Below you will find brief information for Fiber Converter TFC-1000MSC, Fiber Converter TFC-1000S20, Fiber Converter TFC-1000S50. These fiber converters let you extend your network over long distances using fiber optic cable. The TFC-1000MSC supports multi-mode fiber cable with a 550-meter maximum distance and comes with a MT-RJ connector. The TFC-1000S20 and TFC-1000S50 support single-mode fiber cable with a maximum distance of 20km and 50km respectively and come with an SC connector.

PDF
Document
TRENDnet Fiber Converter TFC-1000MSC, TFC-1000S20, TFC-1000S50 Quick Installation Guide | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Supports 1000BASE-SX/LX

  • Multiple models for different distances

  • LED indicators for power and link status

  • DIP switches for configuration options

  • 5-year warranty

  • FCC, CE, CISPR, VCCI certifications

  • Easy setup and configuration

  • Compatible with various fiber cable types

  • Supports both multi-mode and single-mode fiber

  • Provides reliable and high-speed data transmission

Frequently asked questions

First, check that the power outlet is receiving power. Second, make sure the power adapter is firmly connected to the Fiber converter and the power outlet. Third, make sure the Ethernet and the Fiber cables are connected.

First, verify that you are using the proper fiber cable (e.g. multi-mode fiber cable for multi-mode converter; single-mode fiber cables for single-mode converters). Second, verify that the TX and RX cables have been reverse on the opposite Fiber connection. Third, power down the fiber converters and the switches. Wait 15 seconds, then plug the switches and the fiber converters back in.

Please reference section 4 for distance information.

Preparing document for printing…
0%