Fire Security Brochure
Fire Protection - Conventional Fire Panels
Steeple Conventional
PANELS:
• Easy to install and use, these conventional fire panels delivers basic fire detection and
alarm facilities at exceptional value for money
• Designed with smaller installations in mind, a choice of 2 or 4 zone compact panels are
available, each capable of having up to 20 detectors connected per zone
• End of line devices for both detector and alarm circuits are conveniently supplied as
standard
• Easy to use, with a simple “one-shot” test facility to ensure regular mandatory testing
can be quickly and regularly accomplished
• Other standard features, such as class change, zone or sounder circuit disabling and
programmable relay output facilities complete a highly competitive solution
ACCESSORIES:
24V Flush Call Point
(SCPF)
The flush call point will mount onto any standard UK single back box with a depth of
25mm or greater. Consideration should be given to the amount of cabling space at the
rear of the call point, i.e. a deeper box or spacer eases installation.
4 Zone Fire Panel
S4Z
24V Surface Call Point (SCPS)
The surface mounting call point comes complete with a back box onto which the call point
is mounted. There is provision for rear cable entry and using the provided template, cable
holes cab be drilled into the top or bottom of the back box to accept 1 or 2 cable glands.
24V Base Mounted Sounder (SSOUNDER)
Low current consumption. Blank cover for use as stand alone sounder. Reduced
installation costs. Colour matched to leading detectors. Fixing platform for detector bases.
Surface Callpoint with Glass
SCPS
24V Xenon Beacon
(SBEACON)
The Solex xenon beacons are a replacement for the earlier BE and Inergi (IB) beacons.
The increased functionality of the Solex permits a much reduced range of products and
therefore allows a simplified stock holding and easier choice for the installer. The wide
operating voltage, increased efficiency and automatic synchronisation of the Solex make
them a universal solution for all types of alarm and monitoring system.
150mm Bell
SBELL
Standalone Battery Callpoint & Sounder
(BOXER)
Combined call point and sounder. Battery operated - no mains required. Resets with a
simple key. Use individually or link up to 12 units. No glass to replace or spares required.
Drop down flag, illuminated LED and 85 dB sounder. Light, compact, industry standard
format.
Self Check Detectors
(SHDF/SC, SHDH/SC, SHDM/SC, SPED/SC)
A self check detector constantly monitors its own circuitry to ensure that it is
working correctly. It also constantly checks the background smoke/heat readings to
ensure that the sensing devices are fully functioning.
• Enhanced system integrity for conventional systems. Simple to install.
• Revolutionary self test technology (Patent no.: EP 02253889.6
• Triggers a fault locally and at panel in event of a fault
• 360 O Status LED visibility. Bi-colour status indicator.
• Drift compensation
If a self check detector should develop a fault, a failsafe alarm circuit triggers a fault
warning at the control panel, alerting the system user to the need for maintenance.
Because the fault activation technology is failsafe, even if a detector completely ceases to
function, a fault condition will still be raised at the control panel.
THE ONLY WAY TO BE SURE A CONVENTIONAL DETECTOR IS WORKING IS TO
TEST IT - THESE SELF CHECK CONVENTIONAL DETECTORS TEST THEMSELVES
SEVERAL TIMES A SECOND!
Medium Response Heat Detector
SHDM/SC
CONVENTIONAL: STEEPLE FIRE PANELS & ACCESSORIES
S2Z
S4Z
SCPF
SCPS
SGLASS
SBELL
SESOUNDERS
SSOUNDER
SBEACON
SSOUNDERF
SBASE
SHDF/SC
SHDH/SC
SHDM/SC
SPED/SC
BOXER
2 Zone Fire Panel and Batteries
4 Zone Fire Panel and Batteries
Flush Callpoint with Glass
Surface Callpoint with Glass
5 Spare Glass for SCPS
24V 150mm Bell
24V Deep Base Elec Sounder
24V Base Mounted Sounder
24V 1 Watt Xenon Beacon
24V Flush Sounder
Detector Mounting Base
Fast Response Heat Detector - Self-Check
High Temperature Heat Detector - Self-Check
Medium Response Heat Detector - Self-Check
Optical Smoke Detector - Self-Check
Standalone Battery Callpoint + Sounder
2
Fire Protection - Conventional Fire Panel
Base Conventional
PANELS:
• Built-in detector removal indication facility
• From 1 to 16 zones
• Conforms to the requirements of EN54-2
• User-friendly access code and controls. One-man test facility. Non-latching zone feature
• Class change input. Earth fault monitoring. Removable cable-entry grommets.
Flame-resistant polycarbonate enclosure.
• Surface or semi-flush mounting as standard with ample termination space
• Log book and manual supplied
DETAILED SPECIFICATION:
All panels have a zone 1 non-latch facility to enable panel interlinking without "lock-up" occurring. The
class change input enables the alarm circuits to operate without panel indication and panel latching.
The cabinet back-box houses only the transformer, thus providing a virtually empty enclosure for first
fix installation. A steel gland plate, removable plastic grommets and ample space are designed to
assist with cable termination.
4 Zone Fire Panel
BFC/4ZC100
A slide-in insert is included for clear zone identification. The surface-mount electronics motherboard is
fitted and terminated after first fix installation.
Finally a terminal cover completes the panel installation. The 4, 8, 12 and 16 zone panels will
accommodate up to 3 repeater panels, which are connected by a shielded 2-core data cable where
the repeater panels are powered locally, or an additional 2-core may be run from the panel for power
(Max. 1 repeater may be powered from the panel).
ACCESSORIES:
BFC Detectors
Optical Smoke Detector
BF/DETO
Polarity insensitive and high environmental performance. Easy to clean and install.
Smooth action, one-way-fit base. Designed for the highest effectiveness by utilising the
latest technology. With enhanced performance, high reliability and elegant shape with a
pure white finish. Designed to meet approvals world-wide, ASICS for increased reliability.
Call Point
BFC/MCP
BFC Call Point (BFC/MCP)
The address of each call point is set at the commissioning stage by means of a sevensegment DIL switch. If an MCP is activated it interrupts the normal protocol to give a fast
response. The Base call point has 4 bytes of non-volatile memory available for the user in
the same way as Discovery detectors. The call point has the conventional alarm facility.
The Base manual call point has only one response mode. This is factory preset to 16.
With the resettable element, the need for replacement glass is negated as the unit may
be reset using the key provided. The test key is inserted into the front of the unit in order
to allow its use wherever it may be sited. The user can test the call point with the test key
or by depressing the element. Every call point comes with an LED for indication of Alarm.
There is no need to remove the front cover and the glass at installation; just one screw
fixes the whole unit together.
Remote LED
BFC/RI
Remote LED
(BFC/RI)
The remote indicator unit has been designed for use with either conventional or
addressable smoke or heat detectors. The device is used to indicate detection operation
in remote or in-accessible locations such as ceiling voids.
CONVENTIONAL: BASE FIRE PANELS & ACCESSORIES
C100 Panels:
BFC/2ZC100
BFC/4ZC100
BFC/8ZC100
BFC/BASE
BFC/BE/6
BFC/CCBS
BFC/DETH90
BFC/DETI
BFC/DETO
BFC/DETRR
BFC/MCP
BFC/RI
BFC/SB
BFC/SS
2 Zone Panel (Batteries not inc.)
4 Zone Panel (Batteries not inc.)
8 Zone Panel (Batteries not inc.)
Common Detector Base
24V 6” Red Bell
Combined Beacon & Sounder
Fixed Heat Detector
Ionisation Detector
Optical Smoke Detector
Rate of Rise Detector
Call Point
Remote LED
Sounder Base
Electronic Hi-Output Sounder
Hi-Output Sounder Surface Sounder
(BFC/SS)
A general purpose electronic sounder for fire, security and industrial applications; the
Sounder is certified to EN54. With the TimeSaver base, connections are made to the
base during the initial wiring phase which results in faster and more reliable installation.
The sounder head twists and clicks into the base on commissioning, avoiding the wiring
and connection problems associated with traditional sounders. Deep base units have
weatherproof protection to IP65 and can be used in all locations both indoors and
outdoors.
3
Fire Protection - Bi-Wire Fire Panels
Bi-Wire systems are based on standard conventional system
technology, but in addition incorporate additional functionality to enable
the callpoints, detectors and the sounders for each separate zone to be
wired on a single common circuit.
This enables the control panel to use a single circuit per zone both for
detection and to power the sounders. Even though the panel continually
powers the sounders, control functionality incorporated within the
sounders enables them to only be activated in the event of a fire alarm
condition. By combining both the detection and the alarm annunciation
wiring into a single circuit, considerable savings in installation time and
cabling can be achieved. Although adding Bi-Wire technology to the
detectors and the sounders does slightly increase the equipment costs
this is normally more than offset by savings in installation cost.
Bi-Wire 2 Zone Panel
BF/2W/2Z
Bi-Wire 4 Zone Panel
FX2204BW
Base Bi-Wire Fire Alarm Panels & Accessories
Cooper Bi-Wire Fire Alarm Panels & Accessories
PANELS:
PANELS:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Two wire installation
Detectors - sounders same 2 core
Built-in end of line device
7 Modes of detection
System fully complies to BS and EN
32 Devices per zone
Repeater panels
Savings in cable costs
Savings in installation costs
Choice of 2, 4 and 8-zone panels - enhanced features available on 4 and 8-zone panels
Detectors and sounders share same wiring
Single 12 VDC battery requirement for 24-hour standby
Single keypad access code for end user and engineer use
Selectable fire/fault relay
Class change facility
Supports up to 20 detectors and 20 sounders, beacons or relays on each zone
Maintenance-free poly switch circuit protection
Wall Sounder
FXN009
TwinFlex Multipoint
BF/2W/DS
Standalone Sounder
BFA/LPS/SA
BI-WIRE: COOPER FIRE PANELS & ACCESSORIES
Bi-Wire Surface Call Point
BF/2W/MCP
FX2204BW
FX2208BW
FX004BW
FX201
FX203
FX251D
FXN009
FXN011230
FXN01124V
FXN520
FXN520BWS
FXN538
FXN622
FXN623
FXN624
FXN625
FXN626
BI-WIRE: BASE FIRE PANELS & ACCESSORIES
BF/2W/2Z
BF/2W/4Z
BF/2W/8Z
BFA/LPS/SA
BF/2W/CBS
BF/2W/D
BF/2W/DS
BF/2W/MCP
BF/A/BASE
BF/A/DET/O
Photo Thermal Detector
FXN622
Bi-Wire 2 Zone Panel
Bi-Wire 4 Zone Panel
Bi-Wire 8 Zone Panel
Bi-Wire Standalone Sounder
Bi-Wire Combi Beacon and Sounder
Bi-Wire Detector and Base
Bi-Wire Detector/Sounder and Base
Bi-Wire Manual Call Point
Bi-Wire Common Detector Base
Bi-Wire Optical Smoke Detector
4
Bi-Wire 4 Zone Panel
Bi-Wire 8 Zone Panel
Bi-Wire LED Beacon
Bi-Wire Call Point
Bi-Wire Waterproof Call Point
Bi-Wire Remote LED Unit
Bi-Wire Wall Sounder
230V Bi-Wire Relay Module
24V Bi-Wire Relay Module
Bi-Wire Common Base
Bi-Wire Base Sounder
Bi-Wire Sounder Plate Cover
Bi-Wire Photo Thermal Detector
Bi-Wire Optical Smoke Detector
Bi-Wire 77 Fixed Heat Detector
Bi-Wire Rise Rate Heat Detector
Bi-Wire 92 Fixed Heat Detector
Common Base
FXN520
Fire Protection - Wireless Fire Alarm System
Wireless Fire Alarm System (CW9000)
Using a new Cooper wireless protocol, CW9000 provides a fire detection system using
secure wireless connections between the field devices and the control panels. Based on
well proven components the sensors, sounders, beacons and callpoints give CW9000 a
highly reliable foundation into which the wireless technology has been integrated to
provide a fully featured analogue addressable fire detection and alarm system.
System Features:
• Meets the requirements of EN54-25
• Addressable 250 device syste
• Range greater than 1km in free air
• Low profile aesthetics
• European tones, fully synchronised
• Dual anti-tamper function
• Peripherals use standard AA cells
The CW9000 system comprises a wide range of panels and field devices that integrate to
form a fully featured, flexible wireless fire detection and alarm system meeting all current
European standards.
Control Panel:
Wireless Fire Alarm System
The CW9000 Control Panel is equipped to operate fully a featured analogue addressable
fire systems with bi-directional communication to all devices via a user friendly ‘touchscreen’ display.
Control Panel Features: 250 Radio devices per panel. 16 Detection zones. Large LCD for
clear indication of status and programming. Comprehensive panel i/o facilities. Full bidirectional radio communication
Sensors:
Detector AV Unit
The CWD range of sensors are designed to comply with EN54 Part 5 & 7 and are based
on multi-sensor technologies using combinations of optical smoke detection and both
fixed temperature and rate of rise heat detection. These elements can be selected to
provide optimum detection of all types of fire and operating conditions.
CWD910 Sensor Features: Multi-sensor technology combining optical smoke detection
and configurable heat detection (fixed, r-o-r & high temperature). Drift compensation.
Tamper alarm. First fix base. Concealed antennas
CWDB920 AV Unit is as the CWD910 sensor integrated with: Highly visible LED alarm
beacon. Alarm sounder. 3 Volume settings. 4 Tones.
Manual Call Point
SYSTEM FEATURES AND BENEFITS
Wireless technology offers unique advantages when compared to the installation of
wired detection and alarm systems:
Manual Callpoint:
CWC950 Manual Callpoints designed to comply with EN54 Part 11 and shares all the
features of the Cooper Addressable Callpoint on which they are based. In addition a
tamper switch is provided so that an alarm is transmitted to the CW9000 Control Panel if
the callpoint is dismantled or removed
CWC950 Features: Reassurance LED. Glass or plastic resettable element (both
provided). Tamper alarm. Concealed antennas.
Fast and simple installation: Requiring only limited cabling, installation time is
greatly reduced. CW9000 is ideally suited to situations where there are limited time
periods for work to be undertaken, such as in educational, healthcare and retail
establishments.
Reduced disruption: The lack of cables also means that there is little damage to
the fabric of the building, especially important in heritage sites or prestigious areas.
Apart from precious décor, the lack of invasion into the structure reduces mess and
the risk that dust and rubble will enter vital areas which is particularly important in
sterile and food preparation areas and other places where cleanliness is paramount.
Open Area Sounder & Beacon:
CWSB980 Sounder/Beacons are designed to comply with EN54 Part 3 and are based on
the Cooper AV unit providing a combined audible and visual alarm to suit applications
affected by the Disabilities Discrimination Act.
Features: 100db(a) Sounder. Integrated highly efficient LED beacon. Tamper alarm. 3
Volume settings. 4 Tones.
Flexibility: Changes to the configuration of a building and reconfiguration of the
system can be accommodated both quickly and simply, minimising down time and
essential for rapid refits. For temporary installations or situations such as small retail
outlets where occupation can change frequently the lack of cables means that an
optimum system configuration can be maintained without major system reworking.
Cost saving: As devices only have to be fixed to the building, there is no need to
run fire resistant cable, trunking, conduit or concealed cables, saving in both
materials and labour. The use of multifunction components, such as the integrated
AV sounder beacon means there are fewer points to install leading to further
economies in the installation process. The unique survey and commissioning tool
has been designed to allow these critical functions to be performed by a single
person, again saving effort on site and reducing cost. A further consideration is the
cost of the batteries used in the system, by standardising on easily available off the
shelf batteries, and ultra-low power consumption to extend operational life and
minimise system running costs.
Signal Booster:
If the initial radio survey shows that there are areas of a building where signal levels are
below that required for reliable operation, then CWB9500 Signal Boosters can be located
to provide the necessary improvement in signal strength.
Input/Output Units:
The Input / Output modules for the CW9000 system allow the transferring of signal
between CW9000 and other fire and non-fire systems.
5
Fire Protection - Detectors
Optical Heat Detectors
Optical smoke alarms use different technologies to Ionisation smoke alarms and respond
better to different fire scenarios. Optical smoke alarms respond much better to slow
smouldering fires such as those on soft furnishings like sofas and beds.
Ionisation Smoke Detectors
Ionisation Smoke Alarms contain a small sealed ionising source which causes a small
electrical current to flow through the air in the smoke chamber. Smoke particles entering
the chamber reduce the current, this is sensed by the electronics and when a pre-set
threshold level is reached the alarm will sound.
Heat Alarms
Aico's range of heat alarms are highly responsive to high temperatures and are designed
for kitchens and garages or other areas where there is a high chance of nuisance alarms
when using smoke alarms, benefits of heat alarms is that they decrease false alarms.
These alarms are suitable for use in areas where BS5839 comes into force. Heat alarm
must not be used on their own they should always be used in conjunction with a smoke
alarm.
Optical Smoke Alarm
Ei156TLH
Ionisation Smoke Alarm with Hush, Alkaline
Battery Back-up and Mounting Plate
Ei141
RadioLINK
With RadioLINK, mains powered smoke alarms are interconnected by wireless signals
rather than cabling. It's so much simpler, more convenient - and easier to change or
extend as and when required.
Multi-Sensor Fire Alarm
(Ei2110)
Contains two separate sensing elements – optical and heat. As the unit monitors two
different byproducts of fire, its response to all fire types (e.g. fast flaming, slow
smouldering etc.) is vastly improved over traditional single sensor alarms. Additionally, its
resistance to false alarms is also increased. This is further enhanced by the unique dust
compensation feature that automatically adjusts for any contamination within the optical
sensor chamber.
RadioLINK Base & RadioLINK Remote Control
Switch Ei2110, Ei160RC
and Ei140 Series Alarms Ei168RC
Multi-Sensor Fire Alarm with Hush, Built-In 10
Year+ Rechargeable Lithium Back-Up Cells,
Mounting Plate and Remote Control Functionality
Ei2110
NOTE ON THE DIFFERENT AICO Ei RANGES:
Ei140 Series: Mains Powered Alarms with Alkaline Battery Back-up: Designed for
applications where the budget is a key consideration and where maintenance is in the
hands of the owner occupier or there is no requirement for lithium power cell back-up.
Ei150 Series: Mains Powered Alarms with 10 Year+ Rechargeable Lithium Cell Back-up
Ei160 RC Series: RC Mains Powered Alarms with 10 Year+ Rechargeable Lithium Cell:
With no risk of casual back-up cell removal, the power supply is virtually guaranteed against
any external threat to the energy supply. The 10 year+ technology used in the 160 RC
Series provides the most effective and reliable back-up power available. Maintenance
requirements are negligible.
Back-Up Cells, Mounting Plate and
Remote Control Functionality
DETECTORS
Optical Smoke Alarms
Ei105R
Optical Smoke Alarm with Interconnect
Ei146
Optical Smoke Alarm with Hush, Alkaline
Battery Back-Up and Mounting Plate
Ei156TLH
Optical Smoke Alarm with Hush and
Built-In 10 Year+ Rechargeable Lithium
Back-Up Cells
Ei166RC
Optical Smoke Alarm with Hush, Built-In
10 Year+ Rechargeable Lithium Back-Up
Cells, Mounting Plate and Remote
Control Functionality
Ionisation Smoke Alarms
Ei141
Ionisation Smoke Alarm with Hush,
Alkaline Battery Back-up and Mounting
Plate
Ei151TL
Ionisation Smoke Alarmwith Hush and
Built-In 10 Year+ Rechargeable Lithium
Back-Up Cells
Ei161RC
Ionisation Smoke Alarm with Hush,
Built-In 10 Year+ Rechargeable Lithium
Heat Alarms
Ei144
Ei154TL
Ei164RC
RadioLINK
Ei168RC
Ei407
Ei411H
Heat Alarm with Hush, Alkaline Battery
Back-Up and Mounting Plate
Heat Alarm with Hush and Built-In
10 Year+ Rechargeable Lithium Back-Up
Cells
Heat Alarm with Hush, Built-In
10 Year+ Rechargeable Lithium Back-Up
Cells, Mounting Plate and Remote
Control Functionality
RadioLINK Base with Built-In 10 Year+
Rechargeable Lithium Back-Up Cells for
use with Ei2110, Ei160RC and Ei140
Series Alarms
RadioLINK Maunal Call Point with 10
Years+ Lithium Cells for use with Ei2110,
Ei160RC and Ei140 Series Alarms
when on Ei168RC RadioLink Bases
RadioLINK Remote Control Switch with
6
Ei428
Test, Hush and Locate Funtions for use
with Ei2110 and Ei160RC Series Alarms
when on Ei168RC RadioLINK Bases
RadioLINK Remote Relay Module with
Built-In 5 Amp Relay and 10 Year+
Rechargeable Lithium Back-Up Cells
Multi-Sensor Fire Alarm
Ei2110
Multi-Sensor Fire Alarm with Hush,
Built-In 10 Year+ Rechargeable Lithium
Back-Up Cells, Mounting Plate and
Remote Control Functionality
Detector Accessories
Ei157
Surface Mount Kit for Ei150 Series
Alarms
Ei1529RC
Remote Control Switch with Test, Hush
and Locate Functions for use with
Ei2110 and Ei160RC Series Alarms
SDB
Smoke Detector Base
T126
Smoke Detector Tester - ‘Canned Smoke’
MCP401RC
Manual Call Point
Fire Protection - Barriers, Wire Free Door Release & Sundries
Fire Barriers
150mm x 120mm Smoke Hood (DLC0S)
Designed for use in fire-rated and suspended ceilings, in order to contain fire and
maintain the ceilings fire rating once breached for installation of downlights. Features top
cable entries, ventilated. Construction intumescent downlight cloth. Standards BS 476.
May be supplied in a square or circular hood shape.
600mm x 600mm Modular Firecap
(AFF130/600)
Easy to install - flexible one piece unit that can be folded and fitted through the diagonal
in the ceiling grid. Can be fitted in seconds - no fixing clips, frame assembly or additional
sealant required. Pre-made slots for easy location on to ceiling grid. Designed to fit a wide
range of 600 x 600 and 1200 x 600 modular luminaires. Tested and approved for use on
suspended ceilings. Provides a high level of additional heat insulation to the ceiling void
during a fire thus reducing the chances of ignition of accumulated dust and flammable
materials. Reinstates the acoustic protection of the ceiling. Maintenance free. In excess of
60 minute protection
Modular Firecap, Fire & Acoustic Rated Dry Lining Back Boxes & Fire & Acoustic Box Inserts
AFF130/600, WA4135, WA4247, AFB1 & AB2
Thermal Loft Cap Vapour Guard
(ALC274)
A 'Loft Cap' is a vapour & thermal insulation seal for loft voids. Providing a highly efficient
vapour seal, meeting the requirements of building regulations, the NHBC and other
insurers. It maintains sufficient air space around the light fitting to avoid overheating Lighting Association Approved. The loft caps rigid construction allows loft insulation to be
laid directly over the loftcap cover, meeting requirements of Building Regulations.
Lightweight, easy to install. (Dimensions: 274mm dia at the base, 224mm dia at the top
and 162mm high.)
FIRE BARRIERS
2 Hour Rated Intumescent Hoods
AFF109/150
150mm
1 Hour Rated Smoke Hood
DLC0S
150mm x 120mm Smoke Hood - 1 Hour Rated
(other sizes available to order)
600mm x 600mm Modular Firecap
AFF130/600
ALC274
Thermal Loft Cap Vapour Guard
Gaskets
ALCG
ALSG
ALDG
CFS100
Ceiling Rose Smoke Gasket
Single Socket Smoke Gasket
Double Socket Smoke Gasket
Intumescent Fan Collar to suit 4” Fan
Fire Rated Dry Lining Box Covers
(AFA1 & AFA2)
Maintains the fire protection performance of the wall - preventing or delaying the spread
of fire for up to 120 minutes. Prevents or delays fire from entering a wall cavity and
attacking the building structure. Cover even works when fitted back-to-back in uninsulated
walls. Provides an effective acoustic barrier to both impact and airborne sounds. Simple
and fast mechanical fixing, no adhesives, no mess. Can be fitted in dusty conditions. Can
be retro fitted to existing sockets /switches or fitted during wall construction.
Fire Rated Dry Lining Box Covers:
AFA1
1 Gang
AFA2
2 Gang
Fire & Acoustic Box Inserts
AFB1
Fire & Acoustic Single Box Insert
AFB2
Fire & Acoustic Double Box Insert
Fire & Acoustic Rated Metal Dry Lining Back Boxes
WA4135
1 Gang 35mm Deep
WA4235
2 Gang 35mm Deep
WA4147
1 Gang 47mm Deep
WA4247
2 Gang 47mm Deep
Fire & Acoustic Box Inserts (AFB1 & AFB2)
Developed to provide maximum protection for penetrations created by the introduction of
both single and double recessed socket boxes. Fits inside switch/socket boxes. Reinstates
fire, sound and air barrier. Minimises heat loss and drafts.
Wire Free Door Release
(DORGARD Range)
Dorgard is a device designed to safely hold open a fire door and automatically release it
upon the sound of a fire alarm. When Dorgard is holding open a fire door it listens for a
continuous fire alarm sound level of over 65 decibels. After approximately 14 seconds it
will release, allowing the fire door to close under the pressure of the overhead door
closure (not included). It can be used to hold the fire door open in any position. Works on
most floor types, but comes with a floor plate in case of difficulty. Unlike electro-magnetic
retainers (EMR), Dorgard requires no wiring as it is battery operated and self-contained.
Fire Alarm Sundries
NBUR2C1.5, FIR1LOG, D-DTR2012R, 3469MR & T126
WIRE FREE DOOR RELEASE
DORGARDBLK
DORGARDRED
DORGARDWHI
Black
Red
White
FIRE ALARM SUNDRIES
Fire Cable - Top British Brand (white or red)
NBUR2C1.5
1.5mm 2 Core Fire Cable
NBUR3C1.5
1.5mm 3 Core Fire Cable
NBUR4C1.5
1.5mm 4 Core Fire Cable
NBUR2C2.5
2.5mm 2 Core Fire Cable
VEP215ERH
1.5mm 2 Core Red Enhanced
Sundries
NPC2R
T126
3469MR
D-DTR2012R
FIR1LOG
RCHJ32 PVC Clips - Red
‘Canned Smoke’ Smoke Detector Tester
Metalclad Key Switched Spur with Flex Outlet & Neon
20mm IP68 Compression Gland - Red
Fire Alarm Log Book
Wire Free Door Release
DORGARDBLK
7
Security - Wireless Burglar Alarm System
Wireless Burglar Alarm Kit
(PMXPLUSKIT)
Today’s homeowners want much more than a security system - they want their system to
alert them in case of a burglary, fire and flood as well as medical emergencies of “at risk”
loved ones - anywhere they are, at home or away. But that’s just the beginning. They want
camera connectivity to view their front doors and various rooms. They want the ability to
turn their electrical appliances on and off by telephone. Some of them even want control
of their property through internet access or SMS messaging. PowerMaxPlus can deliver
any or all of the above!
The PowerMax+TM wireless system is ready to install right out of the box. Eliminating
cabling work, even to the wireless external siren, installation can be completed in less
than 2 hours. Just plug and protect. (Please note: Extra accessories may be required please ask for a quote.)
THE KIT CONTAINS: One PowerMax+ panel, Two key fobs (MCT-234) One Door contact
(MCT-302) Wireless bell box (MCS-710) Two pet tolerant PIR detectors (K985) Frequency
868MHZ
Powermax Wireless Alarm Kit
PMXPLUSKIT
PMXPLUSKIT
Kit contents:
Wireless Supervised Flood Detector
MCT-550
Two Way Keypad
MKP-150
ACCESSORIES:
Wireless Supervised Photoelectric Smoke Detector
(MCT-425)
Notifications of low battery and maintenance needs are sent to the PowerMax control
panel.
Wireless Supervised Carbon Monoxide Detector (MCT-442)
Low battery, maintenance needs and replacement time notifications are sent to the
PowerMax control panel. 5 Year life.
Wireless Pet Tolerant PIR
K985
Wireless Supervised Flood Detector (MCT-550)
Low battery notifications are sent to the PowerMax control panel. Highly sensitive detects water at ground level. Small and inconspicuous.
Wireless Supervised Photoelectric
Smoke Detector
MCT-425
WIRELESS BURGLAR ALARM SYSTEM
PMXPLUSKIT
K985
MCM-140
MCS-710
MCS700PART
MCS-700D
MCT-234
MCT-302
MCT-303
MCT-425
MCT-442
MCT-550
MKP-150
NEXT-MCW
PMX-GSM
T-MCW
09912-K
09912-L
09913-N
Powermax Wireless Alarm Kit
The kit contains: One PowerMax+ panel, Two key fobs (MCT-234)
One Door contact (MCT-302) Wireless bell box (MCS-710)
Two pet tolerant PIR detectors (K985) Frequency 868MHZ
Wireless Pet Tolerant PIR
One Way Keypad
Wireless Siren Box
Part-Wired Bell Box
Dummy Siren Box
Keyfod
Wireless Door Contact
Wireless Impact Sensor - White
Wireless Supervised Photoelectric Smoke Detector
Wireless Supervised Carbon Monoxide (CO) Detector
Wireless Supervised Flood Detector
Two Way Keypad
Wireless Next 12m PIR
GSM Module
Wireless Miniature PIR
Batteries for MCS-710
Battery for PMXPLUSKIT
Battery for K985 PIR
8
Security - Steeple Burglar Alarm System
PANELS:
Compact 8 Zone Alarm Panel
(STAP8Z)
On board illuminated keypad panel with PA and Tamper
• Up to 4 Accenta RKP’s per system
• Part set programs. 4 Access codes. Chime
• 8 Zones programmable for security, 2 zones for fire
• PA input. Tamper input. Ouputs for external siren and strobe
• 250 event memory (LCD keypad), 8 event memory (LED keypad)
• Walk test facilities. Quick set feature
• Battery capacity of up to: 2.1Ah
8 Zone Alarm Panel + Keypad
•
•
•
•
•
•
•
8 Zone Alarm Panel + Keypad
STAP8Z/REM
(STAP8Z/REM)
Up to 4 Accenta RKP’s per system
3 Part set programs. 4 Access codes. Chime. Service warnings. Zone omit. Silent set
8 Event memory
Accepts 1.2 or 2.1 Ah battery
Includes abort and sequential alarm confirmation
1 Amp PSU and NVM protection
6 Programmable outputs for digital communicator.
ACCESSORIES:
Bell Box - Round
PIR Detector
STPIR
(STBBROUND)
With fully integrated sounder/strobe, self-activating cut-off timer and twin status indication,
your choice of audible/visible warning devices has just been made easier
• Dual Anti-Tamper Operation: Tamper circuitry will operate if either the cover is opened,
or the bell box is removed from the wall.
• Integral Battery Backup: With the integral 12V Ni-Cd battery, SAB facility is available as
standard.
• 115dB Sounder Output: Once triggered, a piercing 115dB siren sounds, this together
with the high-visibility xenon flashes, provides both an audible and visual indication of a
break-in.
• Fully integrated sounder/strobe
• Twin LED Status Indication: Two internal LEDs, one to identify that power is being
supplied, and one to indicate tamper status. LED’s can also be set to alternate for eyecatching status confirmation.
• Sounder Timer Selection: Can be configured to reset itself after a preset time interval,
to avoid noise pollution. An additional test mode allows short alarm bursts (lasting 5
seconds) when testing the alarm operation during commissioning.
• Self-activating cut-off timer
Bell Box - Square
STBBSQ
STEEPLE BURGLAR ALARM SYSTEM
8EP407N
STAP8Z
STAP8Z/REM
ALARMBAT/2
ALARMBAT/3
ALARMBAT/7
CONTACT/FL
CONTACT/SU
STBBROUND
STBBSQ
STDUALPIR
STDUMROUND
STDUMSQ
STPETPIR
STPIR
DTPIR
PANICBUT
STKEYPAD
STSPEECHD
MS-N
Pet Tolerant Alarm Kit
Compact 8 Zone Alarm Panel
8 Zone Alarm Panel + Keypad
2 Amp Hour 12V Alarm Battery
3 Amp Hour 12V Alarm Battery
7 Amp Hour 12V Alarm Battery
Flush Contact
Surface Contact
Bell Box - Round
Bell Box - Square
Dual PIR Detector
Dummy Bell Box - Round
Dummy Bell Box - Square
PIR Pet Detector
PIR Detector
Dual Tech PIR
Plastic Personal Attack Button
LCD Remote Keypad
Speech Dialler
Sound Bomb
PIR Detector
(STPIR)
18m x 18m Pet Immune Single Channel Quad Element PIR
• High precision sealed optics
• Full microprocessor control
• Streamlined low-profile aesthetic design
• Pet immunity option, selectable for up to 15Kg or up to 25Kg
• Adjustable pulse count
• Additional white light filtration
Pet Tolerant Alarm Kit
(8EP407N)
Complete one box solution including battery, cable and fixing kit. Will provide a complete
solution for every home up to 4 bedrooms. Suitable for use with small pets. Comes
complete with LCD remote keypad for easy use of the system. The control panel can be
used with compatible smoke detectors. Can be extended to a maximum of 8 zones. Wide
range of additional accessories can be added
KIT COMPRISES: 1 x Honeywell 8SP339A Accenta mini Gen4 control panel with LCD
keypad. 3 x 8IR100 Pet tolerant PIR sensors. 1 x 8EP420 Live Reson8 bell box. 2 x
AC035 Door contacts. 1 x AC030 Panic attack button. 1 x UL1213 1.2Ah Battery. 1 x
AC066 100m 6 Core alarm cable. 1 x 6BB022 Fixing kit.
SECURITY ALARM SUNDRIES
ALARM4CORE
ALARM6CORE
ALARM8CORE
24TCT-45
TB17
SA108
BS27/3
Multi-Stranded 4 Core Alarm Cable
Multi-Stranded 6 Core Alarm Cable
Multi-Stranded 8 Core Alarm Cable
Cable Tacker
6W Alarm Junction Box
10mm x 8mm Self-Adhesive Mini-Trunking (120m Pack)
3A Unswitched Spur
9
Security - Burglar Alarm System & Accessories
Texecom Burglar Alarm System
PANELS:
8 Zone Alarm Panel
(VERITAS8)
The best selling stand alone control panel. Features 8 fully programmable zones &
accepts up to 6 backlit remote keypads. Already renowned for its reliability, the Veritas 8
has been upgraded with a host of new features. Installation and servicing are now even
faster. Operation is quicker and easier. Programming has been both simplified and
extended. Outstanding features include: 8 Fully programmable zones plus tamper. 8
Service timers (date programmable). 2 Part sets. 2 Programmable access codes. Keypad
PA option (3 & 8 together). Accepts up to 6 backlit remote keypads. Single button quick
set option. Latching walk test mode. 7 Engineer event logs. Key switch facility. Quiet entry
tone on part set. Designed to comply with ACPO policies.
8 Zone Compact Alarm Panel
(VERITAS8C)
Slimline discreet stand alone control panel. Features 8 fully programmable zones &
accepts up to 6 backlit remote keypads. 8 Fully programmable zones plus tamper. 8
Service timers (date programmable). 2 Part sets. 2 Programmable access codes. Keypad
PA option (3 & 8 together). Accepts up to six backlit remote keypads. Single button quick
set option. Latching. Walk test mode. 7 Engineer event logs. Key switch facility. Quiet entry
tone on part set. Designed to comply with ACPO policies.
8 Zone Alarm Panel
VERITAS8
8 Zone Remote Alarm Panel + Keypad (VERITASREM)
Best selling control panel with remote keypad. Featuring 8 fully programmable zones &
accept up to 6 backlit remote keypads. 8 Fully programmable zones plus tamper. 8
Service timers (date Programmable). 2 Part sets. 2 Programmable access codes. Keypad
PA option (3 & 8 together). Accepts up to six LED backlit remote keypads. Single button
quick set option. Latching walk test mode. Engineer event log - saves 7 entries. Key switch
facility. Quiet entry tone on part set. Designed to comply with ACPO policies.
Veritas Event Log Alarm Panel
Medusa PIR
MEDUSAPIR
(VERITASEXC)
Fully programmable and incorporating all the features that have made the Veritas R8 Plus
the uncontested market leader, the Veritas Excel boasts a fully featured LCD remote
keypad. Banner Text, User and Zone Names are all programmable and the 250 Event Log
may be accessed directly. An intuitive menu system makes reference to the instructions
unnecessary. 8 Fully programmable zones plus tamper upload/download compatible.8
Channel; communicator interface with line monitor EOL or normally closed zone
operation. 4 Programmable part set suites accepts up to 6 remote keypads (LCD or LED).
8 Programmable access codes full ACPO compliance and anti-code reset. 250 Event log
(Time/date stamped). 1.2mm enclosure also available.
Odyssey 4E Bell Box - Slimline
BB4001
Intruder Alarm Panel (PREMIER48)
The Premier Series of control panels provide high level menu driven programming via a
comprehensive range of LCD keypads, minimising set up time and maximising reliability.
Installation is further simplified by a host of innovative features including multiple
terminals per zone for ease of wiring. Where communication of system events is a priority,
a wide range of plug-on multi-protocol communicators is available plus full
upload/download via Wintex software.
TEXECOM BURGLAR ALARM SYSTEM
VERITAS8
VERITAS8C
VERITASR8+
VERITASREM
VERITASEXC
PREMIER48
KEYPAD
LCDP
DCON01
BB1001
BB3001
BB4001
PETWISEPIR
REFLEXQUAD
RF360PIR
MEDUSAPIR
REFLEXPIR
MIRAGEDUAL
IMPE01
PAN001
SOUNDER105
AFQ0001
RPX01
SPEECHDIAL
8 Zone Alarm Panel
8 Zone Compact Alarm Panel
8 Zone Alarm Panel + Keypad
8 Zone Remote Alarm Panel + Keypad
Veritas Event Log Alam Panel
Intruder Alarm Panel
Additional Keypad for Veritas Standard Panels
LCD Keypad
Door Contact
Odyssey 1E Bell Box - Square
Odyssey 3E Bell Box - Shield
Odyssey 4E Bell Box - Slim
3D Pet Immune PIR
Adjustable Range PIR
360° Ceiling PIR
Medusa PIR
Quad Element PIR
Dual Technology PIR
Shock Sensor
Panic Button
Extension Speaker Sounder
Prestige External TD Outdoor Motion Sensor
Excel LCD Remote Keypad
Speech Dialler
10
Security - Access Control
Single 5 Wire Audio Door Entry Kit
(F65021N)
The Pulsar audio entry system provides a cost effective door entry solution for single or
dual occupancy buildings. Designed with simple good looks, incorporating a slimline back
box which eliminates the need for flush fitting.
• Easy to install, 5-wire connection
• Dual tone sounder
• Capable of supporting up to three handsets per call button
• Slimline handset with lock release button and spare service button
• Audio volume control
• Slimline panel
• Aluminium fascia design prevents water ingress into the speaker
• High visibility large blue backlit call button
• Slimline surface mount
• Available with 1 or 2 call buttons
• Address window
KIT INCLUDES: 1x 1 Button entry panel, 1x F21809 Transformer and 1x F22510B
handset
Single 5 Wire Audio Door Entry Kit
F65021N
1 Way Colour Video Entry Kit
(FHW-10AC)
Simple door entry solution providing two-way audio communication between a video
monitor handset and external door panel with the added benefit of a colour video image
for visual identification. Ideal for a simple domestic intercom e.g. door bell replacement.
•
•
•
•
•
•
Discrete surface door panel.
Simple 4-core installation (recommended 6-core alarm cable for distances 50-60m).
Has 100m capability through use of RG59 coax cable
Lock release and Picture recall functions on video monitor
Call volume and brightness control available on monitor.
If lock release used then 6-cores required between external panel and monitor, lock
release must be 12v d.c fail secure.
• High quality colour video image.
• Plug top power supply negates the need for mains installation.
• Very cost effective solution.
1 Way Video Door Entry Kit
FHW-10AC
2V A.C. Rim/Mortice Lock Release (ADCN203+S)
Ideal for timber door applications, operates with a standard Yale nightlatch. The release
comes fitted out of the box as a rim (surface) release but we supply a mortice plate to
also allow the customer to fit the release mortice (flush).
2V A.C. Rim/Mortice Lock Releas
ADCN203+S
ACCESS CONTROL
F65021N
FHW-10AC
CDV50PDRC4
VIDEOKIT
GALEO
ADCN203+S
Single 5 Wire Audio Door Entry Kit
1 Way Video Door Entry Kit
Colour Video Door Entry Kit
1 Way, 2 Wire Door Entry Kit (lock release not included)
Backlit Keypad
2V A.C. Rim/Mortice Lock Release
11
Security
- Access Control Complete Door Entry System Variations
Tate Colson can tailor a door entry system to meet a customers needs, from integrating a video camera, access control keypad or proximity system
into are anti-vandal panels, or making the systems single entrance or multiple entrance. Their anti-vandal range can also provide flexibility with
panel engraving e.g. including customer name, logo, flat name/number etc.
All series and anti-vandal ranges can be fitted with secrecy of conversation, tradesman facility and/or privacy facilities as well as being audio or
video (B/W and colour options available). Custom panel sizes can also be accommodated for particularly useful if replacing an existing flush
installation (only on anti-vandal range) as well as having a range of panel finishes from anodised aluminium, stainless steel, brass, or bma (bronze
metal antique).
Series 2/5 Audio Entry System
The Series 2/5 range from Acet presents a robust anodised aluminium entry panel which
is semi modular, enabling systems from 1 to 58 ways to be constructed.
Systems can be selected from standard kits or by combining individual panels.
• Robust anodised aluminium construction.
• Modular construction enables multi-unit combinations up to 58 way using
‘button only’ panels.
• Surface or flush mounted options
• Hinged fascia with single secret head fixing screw makes access and wiring
easier for the installer.
• Attractive stylish Ellisse handset provides a modern look
• Address window(s)
• 5 Wire (Series 5) or 2 Wire (Series 2) connection options
SERIES 2/5 KITS:
We offer a basic range of boxed kits from 1-10 ways in either 2 wire (Series 2) or 5
wire (Series 5) which can be flush mounted or, with the addition of an aluminium
surround, can be surface mounted.
ADDITIONAL FUNCTIONS:
Complete systems can be tailored to specific requirements with the addition of Trade
Entry, Secrecy of Conversation or Multi-Entrance features
Anti-Vandal Audio Entry System
Series 2/5 2 Button Entry Panel
The Anti-Vandal range of panels are custom built in stainless steel or brass finish, tailored
to each specific requirement, offering both vandal protection and good looks. There is no
limit to the number of buttons that can be included on the panels and all can have
integrated access control, video or trade facilities added.
The panels have been designed to be fully compatible with Acet door entry
speaker amplifiers.
The Anti-Vandal door entry panels have the following features:
• 2.5mm stainless steel fascia
• Flush mounted door entry panel as standard to maximise protection but
surface boxes are also available on request
• 20mm diameter buttons have restricted travel to prevent high impact damage
• Fascia fitted with concealed hexagon socket head screws
• Speaker and microphone have protective mesh grill fixed to the back of fascia
• Engraving as required is included free of charge (for standard lettering only)
• Braille and Tactile engraving is also available on request
• Marine Grade and BMA finishes available upon request
Also available:
8-Button Powercom Video Panel shown with a Diva handsfree monitor (shown right)
Planux monitor (Shown left). High-end door entry systems - ask for further details.
Anti-Vandal 6 Button Entry Panel
12
CCTV
Digiview 4 CCTV System (DIGIVIEW4)
Four Channel Colour Digital CCTV system
If you are looking for an all-in-one digital CCTV system, then look no further than the ESP
Digiview 4 kit. The Digiview 4 records colour and black and white; it comes with indoor
and outdoor cameras, which show both quad and or/single screen display via DVR,
recording all four images in full screen display via the DVR, recording all four images in
full screen from 1 day to 1 month.
•
•
•
•
•
•
•
•
DigiView 4 CCTV System
DIGIVIEW4
Day/night cameras with LED illumination
Digital full screen recording
Built in motion detection
Up to 16 weeks continuous recording
Compatible with CCTV monitor or TV
Cameras suitable for use indoor or outdoor use
USB output for captured image transfer
Quad or single screen view
KIT CONTENTS:
1 x DVR c/w 160GB hard drive, 4 x IRCAM-20 day/night cameras, 4 x 15m camera
cables, 1 x lead for monitor or TV connection, 1 x software for image transfer,
1 x USB lead.
Dummy CCTV Camera
CTVDM-01
CCTV
DIGIVIEW4
CTVDM-01
DigiView 4 CCTV System
Dummy CCTV Camera
Disability Assistance
Disabled Toilet Alarm (NC951)
Attractive compact design blends perfectly into any sort of decor. Combined single zone
call controller and 12V power supply fits on one double gang plate and includes an
integral buzzer, reset button and alarm LED. Ceiling pull unit features two open sided
triangular pulls for ease of use by the infirm. A remote reset point and over door light &
sounder are also included for increased flexibility and full compliance with BS8300.
Simple to install - four core stranded security cable is ideal for most installations. Disabled
WC sticker included in all kits. All wall-mounting plastic accessories fit 25mm back boxes.
Ceiling pull is surface mountable. To operate, the user simply pulls the cord of a ceiling
pull unit to activate a light and sounder outside the WC.
Disabled Toilet Alarm
NC951
DISABILITY ASSISTANCE
NC951
Disabled Toilet Alarm
Kit includes: Single zone controller, pull cord unit, over door light &
sounder, reset button & sticker.
13
Emergency Lighting
LED Edge Lit Hanging Exit Sign
(LEDES Range)
Engraved outline pictogram legend. Down direction legend included. 250mm chain
suspension. 30m Viewing distance. Status indicator LEDs. 4 Watt LED light source. 3 Hour
maintained. Alternative legend patterns available.
Emergency Bulkhead
(YD630MD)
Maintained and non maintained in the same unit, for a highly competitive price. C/w tube
and set of self adhesive legends (shown) that can be configured for left, right or down
arrow installation. Features: Suitable for outdoors, 3 hour emergency light, hinged gear
tray and captive screws for easy installation, universal self adhesive legend pack
included, facility for remote switching.
LED Edge Lit Hanging Sign - Silver
LEDESLS
Exit Box (BMD1L)
8 Watt fluorescent emergency exit box 3 hr maintained. Complete with down legend other legends sold separately.
Bulkhead with Diffuser and Legend
EM3MT
Twin Spotlight (TWINSPNMB)
The twinspot emergency light fitting is designed to light up an exit path on failure of the
mains supply. Features: 3 Hour emergency light, individual LED health lamp indicators.
Lamp Type: Requires 2 x 20W halogen lamp (included also available separately). IP20.
Complete with lead acid batteries.
28W 2D Emergency Circular Luminair
(282DEME)
The best option where efficient lighting combined with diffused ambient lighting is
required. Utilising 2D lamp technology which allows a long life with maximum efficiency.
Easy-install system, using a snap fit system on the gear tray and diffuser.
Unobtrusive low profile. Matching mains version available (part ref 282D). Comes
complete with lamp. Polycarbonate self-coloured grey finish with white/opal diffuser. Self
contained batteries - sealed nickel cadmium. Suitable for ceiling of wall mount. BESA
entry and screw fixing drill outs on rear.
Emergency Bulkhead with Shaped Diffuser
Twin Spotlight - 3 Hour Non-maintained,
2 x 20 Watt
TWINSPNMD
(EM3MT)
Maintained or non-maintained operation. Remote switching facility, hinged gear tray.
Charge indicator light. 2 x D cell battery pack included. Body & diffuser: Polycarbonate.
Lamp: 1 x 8W G5 T5 300mm flu. Tube included. Duration: 3 hours. IP20.
Emergency Bulkhead - 8 Watt, IP65
YD630MD
Recessed Emergency Fittings (REM3 Range)
REM3RDD: 2 x D cell battery pack included. 1 x Down legend included. Facility for nonmaintained mode. Facility for remote switching. Charge indicator light. Hinged gear tray.
Body: Steel diffuser: Reeded polycarbonate. Lamp: 1 x 8W G5 T5 300mm fluorescent
tube - supplied. Duration: 3 hours. Available in chrome or white finish.
EMERGENCY LIGHTING
Circular Luminaires
DEC28EMHFN
Circular Luminaire - High Frequency.
282DEME
Circular Luminaire - High Frequency.
28 Watt. 2D. Maintained lamp included.
REM3RD: 2 x D cell battery pack included. Facility for non-maintained mode. Facility for
remote switching. Charge indicator light. Hinged gear tray. Body: Steel diffuser: Reeded
polycarbonate. Lamp: 1 x 8W G5 T5 300mm fluorescent tube supplied. Duration: 3 hours.
Available in chrome or white finish.
Emergency Bulkheads
EM3MT
Emergency Bulkhead with Shaped Diffuser
and Legend - 8 Watt, IP20
YD630MD
Emergency Bulkhead - 8 Watt, IP65
Semi-Recessed Frames for YD630MD
SRBULKCR
Chrome
SRBULKWH
White
REM3MDD: 2 x D cell battery pack included. 1 x Down legend included. Facility for nonmaintained mode. Facility for remote switching. Charge indicator light. Hinged gear tray.
Body: Steel. Lamp: 1 x 8W G5 T5 300mm fluorescent tube supplied. Duration: 3 hours.
Available in chrome or white finish.
Exit Box (down legend included)
BMD1L
8W Exit Box Maintained or Non-maintained
LED Edge Lit Hanging Exit Sign
LEDESLS
Silver c/w Legend
LEDESLWH
White c/w Legend
LEDLGDL
Extra Legend Panel - Left Arrow
LEDLGDR
Extra Legend Panel - Right Arrow
Recessed Emergency Fittings
REM3RD
Recessed Fitting w/Reeded Diffuser - White
REM3RDCR
Recessed Fitting w/Reeded Diffuser - Chrome
REM3RDD
Recessed Fitting w/Reeded Diffuser & Down Signlight - White
REM3RDDCR
Recessed Fitting w/Reeded Diffuser & Down Signlight - Chrome
REM3MDD
Recessed Fitting w/ Metal Diffuser & Down Signlight - White
REM3MDDCR
Recessed Fitting w/ Metal Diffuser & Down Signlight - Chrome
RLGDLR
Left & Right Sign for REM Range
Twin Spotlights
TWINSPNMD
Recessed Emergency Fittings
REM3RDDCR and REM3MDD
Twin Spotlight - 3 Hour Non-maintained, 2 x 20 Watt
14
Emergency Lighting (Continued)
EMERGENCY LIGHTING - FLUORESCENT FITTINGS
Emergency Battens High Frequency
S51BATHFEM
1 x 58 Watt 5ft Single
2 x 58 Watt 5ft Twin
S52BATHFEM
S61BATHFEM
1 x 70 Watt 6ft Single
2 x 70 Watt 6ft Twin
S62BATHFEM
Emergency Anti-Corrosive Fittings High Frequency
1 x 58 Watt 5ft Single
SAC158HFEM
SAC170HFEM
1 x 70 Watt 6ft Single
2 x 58 Watt 5ft Twin
SAC258HFEM
SAC270HFEM
2 x 70 Watt 6ft Twin
Emergency Modular Fittings
S1264HF/EM
1200mm x 600mm, 4 x 36 Watt High Frequency
600mm x 600mm, 4 x 18 Watt High Frequency
S664HF/EM
SMF1264/EM
1200mm x 600mm, 4 x 36 Watt
SMF664/EM
600mm x 600mm, 4 x 18 Watt
Emergency Surface Modular Fittings High Frequency
2 x 58W Twin H/F Surface Fitting
SB258HF/EM
2 x 70W Twin H/F Surface Fitting
SB270HF/EM
Emergency Anti-Corrosive Fittings HF
& Emergency Battens
Emergency Modular Fittings
Emergency Surface Modular Fittings - HF
Emergency Lighting Accessories
Emergency Test Switch
(ELT-10)
This 4 position key switch is designed to test emergency lighting, it allows you to turn off
the power supplying the emergency lights to see if the lights are functioning correctly. The
4 positions on the key switch allow you to test the circuits for a set period of time; 10
minutes, 1 hour or 3 hours depending on what test you wish to perform. Using this key
switch you remove the chance of the emergency light being left on or the batteries being
depleted. The unit will power up with the SUPPLY ON lamp illuminated - the supply will be
connected to the output. Turn and release the key switch to select the 10 minute test
interval. Turn and release again to select the next test interval - the supply will be
disconnected from the output for the duration of the test. To cancel a test, turn and
release the keyswitch until the SUPPLY ON lamp illuminates.
Low Voltage Emergency Battery Pack
Emergency Test Switch
ELT-10
(R650M)
There are many instances where you might need an emergency version of a light fitting
which doesn't offer an emergency option. This kit allows you to convert any 12V low
voltage light fitting into a 20W maintained emergency light. 3 Hour maintained. The
battery & transformer will fit through 60mm hole. Provides 20W output in emergency
mode. LED indicator.
Retrofit Emergency Gear Tray
SEMRET16W
EMERGENCY LIGHTING ACCESSORIES
D Cell Batteries for Emergency Lights
EMERGBAT2C
2 x D Cell Stick
EMERGBAT3C
3 x D Cell Stick
EMERGSBS3C
3 x D Cell Side by Side
Emergency Test Switches
ELT-10
Emergency Test Switch - automatic key operated, 4 positions
WA110+WA081
Double Pole Key Switch & Pattress
Low Voltage Emergency Battery Pack
R650M
Low Voltage Emergency Battery Pack
Retrofit Emergency Gear Tray
SEMRET16W
16 Watt
SEMRET28W
28 Watt
Sundries
SDR
SRI
EM1LOG
240V Door Retainer
Remote Indicator
Emergency Lighting Log Book
Low Voltage Emergency Battery Pack
R650M
15
HEAD OFFICE: Steeple House, Unit 17 City Business Park,
Easton Road, Bristol, BS5 0SP,
Tel: : 0117 954 8140 Fax: 0117 941 2379
email: [email protected]
For Accounts Queries:
Please contact your local branch
York
Preston
Accrington
Huddersfield
Southport
Skelmersdale
Merseyside
Manchester
Wirral
Macclesfield
Lincoln
Chesterfield
Mansfield
Wrexham
Nottingham
Long Eaton
Burton On
Trent
Telford
Norwich
Walsall
BIRMINGHAM
Dudley
• Bordesley Green • Perry Barr
• Erdington • Kings Heath
Banbury
Hereford
Brackley
Cheltenham
Gloucester
BRISTOL
Swindon
• Bradley Stoke
• Central
• Redland
St.Austell
Saltash
Braintree
High
Wycombe
Basildon
Salisbury
Taunton
Tiverton
Exeter
Ipswich
Leighton
Buzzard
Melksham
Barnstaple
Newton
Abbot
Torquay
Paignton
Plymouth
Bury
St.Edmunds
Oxford
Stroud
Cwmbran
Weston- Bath
super-Mare
Beccles
Thetford
Kettering
Rugby
Leamington
Wellingborough
Spa
Northampton
Coventry
Kidderminster
Merthyr
Tydfil
King’s
Lynn
Loughborough
Hastings
Southampton
Poole
Bournemouth
Dorchester
Falmouth
Penzance
76 Locations Nationwide
All information shown correct at time of going to print. Check www.denmans.co.uk for current information.
BRANCH
1. ACCRINGTON
2. BANBURY
3. BARNSTAPLE
4. BASILDON
5. BATH
6. BECCLES
BIRMINGHAM
7. Bordesley Green
8. Perry Barr
9. BOURNEMOUTH
10. BRACKLEY
11. BRAINTREE
BRISTOL
12. Bradley Stoke
13. Central
14. Redland
15. BURTON ON TRENT
16. BURY ST. EDMUNDS
17. CHELTENHAM
18. CHESTERFIELD
19. COVENTRY
20. CWMBRAN
21. DORCHESTER
22. DUDLEY
23. ERDINGTON
24. EXETER
25. FALMOUTH
26. GLOUCESTER
27. HASTINGS
28. HEREFORD
29. HIGH WYCOMBE
30. HUDDERSFIELD
31. IPSWICH
32. KETTERING
33. KIDDERMINSTER
34. KING’S LYNN
35. KINGS HEATH
36. LEAMINGTON SPA
37. LEIGHTON BUZZARD
CODE
01254
01295
01271
01268
01225
01502
PHONE
383421
259993
374771
418181
444644
715621
FAX
871065
267549
374774
541277
421122
717593
POSTCODE
BB5 1EF
OX16 2RB
EX31 1QN
SS15 6ED
BA1 3EU
NR34 7TQ
email
[email protected]
banbu[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
0121
0121
01202
01280
01376
7666788
3565266
547396
705070
323816
7714124
3443219
537238
702433
346418
B9 4TA
B42 1BX
BH9 3AQ
NN13 7LE
CM7 2GB
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
01454
0117
0117
01283
01284
01242
01246
02476
01633
01305
01384
0121
01392
01326
01452
01424
01432
01628
01484
01473
01536
01562
01553
0121
01926
01525
201320
9548130
9737639
531230
752481
226369
556831
634700
483666
265522
455244
3825050
447744
373900
529546
755833
357251
533333
511340
622100
513152
740707
768287
4447721
831484
374666
617074
9411009
9734553
512958
725712
226865
556282
633120
483832
262959
213550
3777881
447100
375600
302134
755426
263709
533400
511347
623500
411367
755184
775642
4447936
833587
852662
BS32 4EU
BS5 0SP
BS6 6EZ
DE14 3LX
IP32 7BX
GL51 8LZ
S40 3DL
CV1 4DW
NP44 3AS
DT1 2PG
DY1 1RB
B23 6UJ
EX2 5GL
TR10 9DQ
GL1 3QA
TN37 7PJ
HR4 9NS
HP10 9RS
HD2 1YR
IP5 3RG
NN16 0QZ
DY10 1HT
PE30 4HY
B14 7BB
CV31 1XT
LU7 4TZ
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
BRANCH
38. LINCOLN
39. LONG EATON
40. LOUGHBOROUGH
41. MACCLESFIELD
42. MANCHESTER
43. MANSFIELD
44. MELKSHAM
45. MERSEYSIDE
46. MERTHYR TYDFIL
47. NEWTON ABBOT
48. NORTHAMPTON
49. NORWICH
50. NOTTINGHAM
51. OXFORD
52. PAIGNTON
53. PENZANCE
54. PLYMOUTH
55. POOLE
56. PRESTON
57. RUGBY
58. SALISBURY
59. SALTASH
60. SKELMERSDALE
61. SOUTHAMPTON
62. SOUTHPORT
63. ST AUSTELL
64. STROUD
65. SWINDON
66. TAUNTON
67. TELFORD
68. THETFORD
79. TIVERTON
70. TORQUAY
71. WALSALL
72. WELLINGBOROUGH
73. WESTON-S-MARE
74. WIRRAL
75. WREXHAM
76. YORK
CODE
01522
0115
01509
01625
0161
01623
01225
0151
01685
01626
01604
01603
0115
01865
01803
01736
01752
01202
01772
01788
01722
01752
01695
02380
01704
01726
01453
01793
01823
01952
01842
01884
01803
01922
01933
01934
0151
01978
01904
PHONE
576125
9464838
240875
612378
8724994
655990
703102
2647171
384343
367733
621711
412300
9266341
725500
663380
350221
220871
692868
822052
573105
341263
844023
720444
773831
532261
66171
764542
889910
337451
290047
755927
242023
313983
646353
226062
412067
3344372
291186
693241
FAX
576126
9464784
240876
612872
8737564
655988
790166
2603500
376407
367744
631391
412002
9670864
725580
663848
350281
601429
692128
258576
575046
349662
847728
50281
777637
500227
68973
753341
886493
336499
290249
752390
242003
324814
723134
441370
620246
3348819
261683
692814
POSTCODE
LN5 8RE
NG10 1PX
LE11 5GU
SK10 2BN
M17 1RW
NG18 5ES
SN12 6SS
L6 9DF
CF48 2SR
TQ12 4PB
NN1 2TN
NR3 2BX
NG5 6LJ
OX2 0LX
TQ4 7QN
TR20 8HT
PL4 0LE
BH17 7BP
PR1 1QE
CV21 3UY
SP2 7PH
PL12 6LE
WN8 8EB
SO15 OLA
PR9 0SF
PL25 5NE
GL5 3JX
SN5 8WQ
TA2 8RX
TF3 3DG
IP24 1HS
EX16 6SR
TQ1 4UE
WS2 9NW
NN8 2QE
BS24 9DJ
CH62 3QL
LL11 2UB
YO30 4WP
email
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
sw[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
www.denmans.co.uk
denmanselectricalwholesalers
@denmanselectric
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement