01/205/5438.00/15

01/205/5438.00/15
EC Type-Examination Certificate
Powered by TCPDF (www.tcpdf.org)
Product tested
Configurable Safety Relay
Certificate
holder
Rockwell Automation, Inc.
1201 South Second Street
Milwaukee, WI 53204
USA
Type designation
Guardmaster 440C-CR30
Codes and standards
EN 62061:2005 + AC:2010 + A1:2013
EN ISO 13849-1:2008 + AC:2009
Intended application
The configurable safety relay complies with the requirements of the relevant
standards (Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to EN 62061 / IEC
61508) and can be used in applications up to PL e acc. to EN ISO 13849-1 and SIL
3 acc. to EN 62061 / IEC 61508.
Specific requirements
The instructions of the associated Installation and Operating Manual shall be
considered.
IEC 61508 Parts 1-7:2010
EN 60204-1:2006 + A1:2009 + AC:2010
(in extracts)
It is confirmed, that the product under test complies with the requirements for machines defined in Annex I of the EC
Directive 2006/42/EC.
Valid until 2020-02-06
The issue of this certificate is based upon an examination, whose results are documented in
Report No. 968/FSP 1076.00/15 dated 2015-02-06.
This certificate is valid only for products which are identical with the product tested. It becomes invalid at any change of
the codes and standards forming the basis of testing for the intended application.
Berlin, 2015-02-06
Certification Body for Machinery, NB 0035
www.fs-products.com
Dipl.-Ing. Eberhard Frejno
TÜV Rheinland Industrie Service GmbH, Alboinstr. 56, 12103 Berlin / Germany
Tel.: +49 30 7562-1557, Fax: +49 30 7562-1370, E-Mail: [email protected]
10/222 12. 12 E A4 ® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval.
Reg.-No.: 01/205/5438.00/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement