BrainScan Ethernet Access
Armstrong Hot Water, Inc. – Technical Service Bulletin
221 Armstrong Blvd., Three Rivers, Michigan 49093 – U.S.A. Phone: (269) 279-3602
Fax: (269) 279-3130
AHWG TSB#5–BrainScan Ethernet Access Product: BrainScan Technical Assessment Reference: N/A Topic/Problem Replacement & Resolution: Accessing BrainScan via the Ethernet The following will explain the procedure to access the BrainScan board through an Ethernet connection to a Windows 7 PC/Laptop. This is sometimes required in order to change default settings or to access data. Note: This is assuming that BrainScan’s IP address has NOT been changed from original factory default settings Tools Required:  Ethernet Cable  Computer with Admin access (Windows 7 Operating System) Replacement Process/Steps: 1. Ensure not currently connected to internet before starting (local area or wireless) 2. Click Start  Control Panel  Network and Sharing Center 3. Click “Change adapter settings” on the left side of the window (see Figure 1) Figure 1: “Change adapter settings’ Window 4. Right mouse click your network adapter and then click “Properties” (see Figure 2) 5. Select “Internet Protocol Version 4 (TCP/IPv4)” and then click “Properties” (see Figure 3) a. Note – do NOT uncheck the box, simply click the title Intelligent System Solutions® S T E A M ● A I R
armstronginternational.com
● HOT WATER
Armstrong Hot Water, Inc. – Technical Service Bulletin
221 Armstrong Blvd., Three Rivers, Michigan 49093 – U.S.A. Phone: (269) 279-3602
Fax: (269) 279-3130
Figure 2: Local Area Connection Window Figure 3: Internet Protocol 6. Select “Use the following IP address:” and fill out the boxes as shown below (see Figure 4) Figure 4: TCP/IPv4 Window 7. Click OK and exit both “TCP/IPv4” window as well as “Local Area Connection” window 8. Open web‐browser and access the following address: a. http://172.16.31.201 (will get ‘Security Warning’ or ‘Certificate Needed’ message; click ok) b. Default username: armstrong c. Default password: brainscan 9. If there are only 5 ‘brains icons’ on the left hand side and there is no admin configuration page and you need to change the date/time or protocessor settings; access the following address: a. https://172.16.31.201/admin/config.php b. Username: ahwgdrv80 c. Password: choffma Intelligent System Solutions® S T E A M ● A I R
armstronginternational.com
● HOT WATER
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement