- Computers & electronics
- Telecom & navigation
- Telephones
- Avaya
- 4622SW IP Telephone
- User Guide
- 88 Pages
Avaya 4622SW IP Telephone User Guide
Below you will find brief information for 4622SW IP Telephone. This guide covers using the Avaya 4622SW IP Telephone. It's designed for call centers, offering internet access and advanced features. The large display presents up to 12 buttons, with 12 Line/Feature buttons, 4 softkeys, and other fixed buttons for calls, speed dialing, call logging, and WML browsing. Customize your experience with options menus.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
4622SW IP Telephone
User Guide
16-300297
Issue 3
April 2006
© 2006 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document may be incorporated in future releases.
For full legal page information, please see the complete document,
Avaya Legal Page for Hardware Documentation, Document number
03-600759.
To locate this document on our Web site, simply go to http://www.avaya.com/support and search for the document number in the search box.
Documentation disclaimer
Avaya Inc. is not responsible for any modifications, additions, or deletions to the original published version of this documentation unless such modifications, additions, or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation to the extent made by the Customer or End User.
Link disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked Web sites referenced elsewhere within this documentation, and Avaya does not necessarily endorse the products, services, or information described or offered within them. We cannot guarantee that these links will work all of the time and we have no control over the availability of the linked pages.
Warranty
Avaya Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya’s standard warranty language, as well as information regarding support for this product, while under warranty, is available through the following Web site: http://www.avaya.com/support
Copyright
Except where expressly stated otherwise, the Product is protected by copyright and other laws respecting proprietary rights. Unauthorized reproduction, transfer, and or use can be a criminal, as well as a civil, offense under the applicable law.
Avaya support
Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is 1-800-242-2121 in the United States. For additional support telephone numbers, see the Avaya Web site: http://www.avaya.com/support
Software License
USE OR INSTALLATION OF THE PRODUCT INDICATES THE END USER’S
ACCEPTANCE OF THE TERMS SET FORTH HEREIN AND THE GENERAL
LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE AT http://support.avaya.com/LicenseInfo/ (“GENERAL LICENSE TERMS”). IF
YOU DO NOT WISH TO BE BOUND BY THESE TERMS, YOU MUST
RETURN THE PRODUCT(S) TO THE POINT OF PURCHASE WITHIN TEN
(10) DAYS OF DELIVERY FOR A REFUND OR CREDIT.
Avaya grants End User a license within the scope of the license types described below. The applicable number of licenses and units of capacity for which the license is granted will be one (1), unless a different number of licenses or units of capacity is specified in the Documentation or other materials available to End User. “Designated Processor” means a single stand-alone computing device. “Server” means a Designated Processor that hosts a software application to be accessed by multiple users. “Software” means the computer programs in object code, originally licensed by Avaya and ultimately utilized by End User, whether as stand-alone Products or pre-installed on Hardware. “Hardware” means the standard hardware
Products, originally sold by Avaya and ultimately utilized by End User.
License Type(s):
Designated System(s) License (DS). End User may install and use each copy of the Software on only one Designated Processor, unless a different number of Designated Processors is indicated in the Documentation or other materials available to End User. Avaya may require the Designated Processor(s) to be identified by type, serial number, feature key, location or other specific designation, or to be provided by End User to Avaya through electronic means established by Avaya specifically for this purpose.
Third-party Components
Certain software programs or portions thereof included in the Product may contain software distributed under third party agreements (“Third Party
Components”), which may contain terms that expand or limit rights to use certain portions of the Product (“Third Party Terms”). Information identifying
Third Party Components and the Third Party Terms that apply to them is available on Avaya’s web site at: http://support.avaya.com/ThirdPartyLicense/
Interference
Using a cell, mobile, or GSM telephone, or a two-way radio in close proximity to an Avaya IP Telephone might cause interference.
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Intended Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Issue Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What’s New in This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to Use This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conventions Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Symbolic Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typographic Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1: Introducing Your 4622SW IP Telephone . . . . . . . . . . . . 11
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
The 4622SW IP Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
About the Feature Key Expansion Unit (EU24BL) . . . . . . . . . . . . . . . . . . 15
Navigating Application Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4622SW IP Telephone Applications . . . . . . . . . . . . . . . . . . . . . . . . . 17
Phone Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Speed Dial Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Call Log Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Web Access Application (Optional) . . . . . . . . . . . . . . . . . . . . . . . 18
4622SW Telephone Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Additional 4622SW Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Push Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic Backup/Retrieval Feature . . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 2: Using Your 4622SW IP Telephone . . . . . . . . . . . . . . . 21
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Call Appearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Manual Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Automatic Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Redialing a party . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Dialing a party using a Speed Dial button . . . . . . . . . . . . . . . . . . 24
Automatically dialing a party using an administered Line/Feature button 25
Calling a party from the Call Log . . . . . . . . . . . . . . . . . . . . . . . 25
Calling a party from the Web Access application . . . . . . . . . . . . . . 26
Issue 3 April 2006 3
Contents
Receiving Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Call Handling Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Changing from the Speaker to the headset . . . . . . . . . . . . . . . . . 29
Changing from the headset to the Speaker . . . . . . . . . . . . . . . . . 29
Turning the Speaker on during a call. . . . . . . . . . . . . . . . . . . . . 29
Turning the Speaker off during a call. . . . . . . . . . . . . . . . . . . . . 29
Ending a call while the Speaker is active . . . . . . . . . . . . . . . . . . 29
Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Retrieving a Voice Mail Message . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Logging Off the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Reinstating the Phone After a Logoff . . . . . . . . . . . . . . . . . . . . . . 31
Forcing a Login to the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 3: Using the Speed Dial Application . . . . . . . . . . . . . . . 33
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Entering Data on Speed Dial Screens . . . . . . . . . . . . . . . . . . . . . . . . 33
Entering Characters Using the Dialpad . . . . . . . . . . . . . . . . . . . . . 33
Editing During or After Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Name Entry Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adding a Speed Dial Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Updating Speed Dial Button Label Information . . . . . . . . . . . . . . . . . . . 37
Deleting a Speed Dial Button Label . . . . . . . . . . . . . . . . . . . . . . . . . 38
Chapter 4: Using the Call Log Application. . . . . . . . . . . . . . . . . 39
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
About the Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Viewing a Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adding a Call Log Entry to a Speed Dial Button . . . . . . . . . . . . . . . . . . . 41
Deleting Call Log Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Deleting a Single Call Log Entry . . . . . . . . . . . . . . . . . . . . . . . . . 42
Deleting All Entries from a Call Log . . . . . . . . . . . . . . . . . . . . . . . 43
Disabling the Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4 4622SW IP Telephone User Guide
Contents
Chapter 5: Using the Web Access Application . . . . . . . . . . . . . . 45
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Web Access Authentication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Navigating Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Navigating the Home Page and Other
Standard-Size Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Entering Text on Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Entering Characters Using the Dialpad . . . . . . . . . . . . . . . . . . . . . 49
Adding a Speed Dial Button for a Web Site Telephone Number . . . . . . . . . . 50
Chapter 6: 4622SW IP Telephone Options . . . . . . . . . . . . . . . . . 51
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Accessing the Options Main Menus . . . . . . . . . . . . . . . . . . . . . . . . . 52
Application Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting the Redial Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting the Phone Screen on Answer? Option . . . . . . . . . . . . . . . . . 54
Setting the Phone Screen on Calling? Option . . . . . . . . . . . . . . . . . . 54
Setting the Display Call Timers? Option . . . . . . . . . . . . . . . . . . . . . 55
Setting the Message Display Rate . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting the Call Appearance Width . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting Visual Alerting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Enabling/Disabling the Call Log . . . . . . . . . . . . . . . . . . . . . . . . . 56
Personal Ringing Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Status Screen Viewing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Viewing IP Address Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Viewing Quality of Service (QoS) Status . . . . . . . . . . . . . . . . . . . . . 58
Viewing Interface Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Viewing Miscellaneous Status . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Changing the Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Viewing the Network Audio Quality . . . . . . . . . . . . . . . . . . . . . . . . . 60
Logging Off the 4622SW IP Telephone . . . . . . . . . . . . . . . . . . . . . . . . 60
Reinstating the Phone After a Log Off . . . . . . . . . . . . . . . . . . . . . . 61
Backup/Restore Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Settings Saved During a Backup . . . . . . . . . . . . . . . . . . . . . . . . . 62
Setting the Automatic Backup Option . . . . . . . . . . . . . . . . . . . . . . 63
Verifying Backup/Retrieval Status . . . . . . . . . . . . . . . . . . . . . . . . 64
Retrieving and Restoring Data from a Backup File . . . . . . . . . . . . . . . 65
Setting a User ID, Password, and other FTP
(File Transfer Protocol) Options . . . . . . . . . . . . . . . . . . . . . . . . . 66
Issue 3 April 2006 5
Contents
Feature Button Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Changing a Phone/PC Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . 70
Selecting an Alternate Language . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Chapter 7: Headsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Headsets for 4600 Series IP Telephones . . . . . . . . . . . . . . . . . . . . . . . 73
Chapter 8: Telephone Management and Troubleshooting . . . . . . . . 75
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Interpreting Ringer Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Interpreting Display Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Testing Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Testing the Telephone's Lights and Display . . . . . . . . . . . . . . . . . . . 77
Basic Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Troubleshooting 4622SW Applications . . . . . . . . . . . . . . . . . . . . . . . 80
Resetting and Power Cycling the IP Telephone . . . . . . . . . . . . . . . . . . . 82
Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Power Cycling the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
6 4622SW IP Telephone User Guide
About This Guide
Overview
This guide covers how to use your new 4622SW IP Telephone. The 4622SW is simple to use while offering the latest advances in telephony systems. IP (Internet Protocol) telephones obtain their operational characteristics from your central telephone server rather than residing in the phone unit itself. Updates and new features are downloaded to your phone without intervention or the need for phone replacement.
This guide contains eight chapters, geared to how you actually use the phone, each of which is
described in the section titled Document Organization
.
Intended Audience
This document is intended for IP telephone users who have a 4622SW IP Telephone. It is not intended to be a technical reference guide for System Administrators or phone technicians.
Issue Date
This document was issued for the first time in April, 2005 and revised in April, 2006.
What’s New in This Document
Issue 3 reflects changes to the document title and legal pages only. There are no significant changes in telephone operation for Software Release 2.4.
Issue 3 April 2006 7
About This Guide
How to Use This Document
This guide is organized to help you find topics in a logical manner. Read it from start to finish to get a thorough understanding of how to use your 4622SW IP Telephone. Or, use the Table of
Contents or Index to locate information specific to a task or function you want to perform.
Document Organization
This guide contains the following chapters:
Describes each element on the face of the telephone. Also covers telephone navigation, applications and features.
Covers all call-related information, such as initiating calls, receiving calls, speed dialing, calling a party on the call log, conferencing and transferring calls, accessing and retrieving voice mail messages, logging off the phone for security purposes and logging back on to the phone.
Describes how to add, update, and remove
Speed Dial buttons, to facilitate quick dialing of frequently called numbers.
Describes how to view entries on each of the three types of call logs, add a log entry to a
Speed Dial button, and delete one or more call log entries.
Explains how to use the 4622SW’s Web access functions.
Provides first-time use setup and ongoing maintenance procedures for 4622SW telephone options. Also covers troubleshooting certain phone functions.
Provides a list of headsets compatible with 4600
Series IP Telephones and ordering information.
Covers testing your phone’s operation and provides basic troubleshooting actions, if you encounter errors or experience problems.
8 4622SW IP Telephone User Guide
Related Documentation
Conventions Used
This guide uses the following textual, symbolic, and typographic conventions to help you interpret information.
Symbolic Conventions
Note:
This symbol precedes additional information about a topic.
Note:
Typographic Conventions
This guide uses the following typographic conventions:
Document Underlined type indicates a section or sub-section in this document containing additional information about a topic.
“Document” Italic type enclosed in quotes indicates a reference to an external document or a specific chapter/section of an external document.
Italics Italic type indicates the result of an action you take or a system response in step by step procedures.
Conference In step by step procedures, words shown in bold represent a single telephone button that should be pressed/selected.
Related Documentation
This guide and other related documentation is available online at the following URL: http://www.avaya.com/support .
For a Quick Reference to 4622SW features and applications, see the
4622SW IP Telephone Quick Reference (Document Number 16-300298).
For information related to installing an IP Telephone, see the 4600 Series IP Telephone
Installation Guide (Document Number 555-233-128).
For information related to using the telephone stand or wall-mounting a 4622SW IP Telephone, see the 4620/4620SW/4621SW/4622SW/4625SW IP Telephone Stand Instructions (Document
Number 16-300299).
Issue 3 April 2006 9
About This Guide
For information related to maintaining an IP Telephone System on a Local Area Network, see the 4600 Series IP Telephone LAN Administrator Guide (Document Number 555-233-507).
Standard telephone features are described in the Overview for Avaya Communication Manager
(Document Number 03-300468).
10 4622SW IP Telephone User Guide
Chapter 1: Introducing Your 4622SW IP Telephone
Introduction
This chapter introduces you to the layout of the 4622SW IP Telephone. It provides a description for each functional button and other phone characteristics, briefly describes each 4622SW application, and provides basic instructions for navigating display screens.
The 4622SW IP Telephone
The 4622SW IP Telephone is an innovative telephone specialized for Call Centers. The
4622SW gives you access to the World Wide Web while offering the latest features and applications. The large display area allows up to 12 application-specific buttons to be presented and labeled at one time. Additionally, 12 Line/Feature buttons, 4 softkeys, and other fixed buttons provide access to powerful capabilities such as:
● call server-based features,
● speed dialing,
● a Call Log, and
● a WML (Wireless Markup Language, a Web development protocol) browser.
This last feature is covered in detail in
Chapter 5: Using the Web Access Application . The WML
browser provides access to Web sites tailored specifically for devices with smaller display screens like cell phones and Personal Data Assistants.
In addition to these features and applications, the 4622SW provides a robust menu of options to customize your phone preferences.
Your telephone’s display area coincides with how your System Administrator sets up the Line/
Feature buttons. The 4 softkeys assist you in using 4622SW applications and features. The 14 standard (labeled) buttons assist in telephone operation and call handling. A built-in, one-way speaker provides ease of use and flexibility. The telephone has an adjustable stand that moves to optimize your viewing position via the button on the back.
shows the face of the 4622SW IP Telephone. This diagram contains numbered
“callouts” identifying the phone’s primary features and buttons. If you are viewing this guide online, you can click the callout to jump to the corresponding feature or button description.
Otherwise, each callout is described in detail in
following the diagram.
Issue 3 April 2006 11
Introducing Your 4622SW IP Telephone
Figure 1: 4622SW IP Telephone
12 4622SW IP Telephone User Guide
The 4622SW IP Telephone
Table 1: 4622SW IP Telephone Button/Feature Descriptions
Callout
Number
1
Button/Feature
Name
Message Waiting
Lamp
Button/Feature
Description
When lit, indicates you have a message waiting on your voice messaging system. This indicator can also be optioned to flash for incoming calls.
2 Display
3
4
5
6
Line/Feature
buttons
Softkeys
Phone/Exit
Options
The display screen is 4 inches by 2.9 inches. Information displayed varies according to the application/function currently active. When the phone is idle, the top area displays the current date and time. When someone is calling you, the name/phone number of that person displays in the top area.
The display has eight lines. Six display lines are devoted to the current application. One line shows softkey labels for the current application and one line shows Help and other procedural messages. Four grayscale colors are used to indicate activity.
Twelve Line/Feature buttons provide both call appearances
(lines for incoming and outgoing calls) and application-specific functionality.
Used to navigate to, or start application-specific actions, such as Call a number, Cancel the current activity, Save entered data such as a Speed Dial label.
Displays the Phone application main screen or, if applicable, exits the current call server-based feature and normalizes the display.
Displays the Options main screen, from which display and application settings can be updated.
7
8
9
Page Left/Right
Speaker LED
Indicator
Speaker
Shifts from one page to another in the same application, when the display presents the “paging indicator” ( ). These buttons have no effect when the Paging Indicator is not displayed.
Lights steadily when the Speaker is active.
Accesses the one-way Speaker feature.
10
Headset LED
Indicator
Lights steadily when the headset is active.
1 of 2
Issue 3 April 2006 13
Introducing Your 4622SW IP Telephone
Table 1: 4622SW IP Telephone Button/Feature Descriptions (continued)
Callout
Number
11
Button/Feature
Name
Headset
Button/Feature
Description
With a headset connected, changes audio control from the speaker to the headset.
12
13
Mute LED
Indicator
Mute
Lights steadily when the headset is muted.
Turns off the active Speaker or headset microphone, to prevent the other person from hearing you.
14
15
16
Volume Control Adjusts the headset, Speaker, or ringer volume, depending on which item is in use. When you increase or decrease the volume, the top display area shows an icon to indicate the item for which you are adjusting the volume. A visual “volume meter” that shows the volume level follows the icon. This button also controls the volume of the key click sounds. Key clicks sound when you press fixed buttons on the phone such as the dialpad or softkeys.
Headset Jacks
Hold
Provides ports for connecting one or two headsets on the underside of the phone.
Red button used to place a call on hold.
17
18
Transfer
Conference
Transfers a call to another phone.
Sets up conference calls with more than one other person.
19
20
21
22
Drop Drops the last person added to a Conference call or ends the current call, if you are not on a Conference call.
Redial
Numeric (Dialing)
Pad
Feature Key
Expansion Unit
Connection Jack
Redials the last number dialed from the phone or displays a list of the last six numbers dialed for selection. Set using the
Options button described in Chapter 6: 4622SW IP Telephone
.
Standard 12 button pad for dialing phone numbers.
Provides a port (on the underside of the phone) for connecting the optional EU24BL (Feature Key Expansion Unit), which provides additional telephone Feature buttons.
2 of 2
14 4622SW IP Telephone User Guide
About the Feature Key Expansion Unit (EU24BL)
About the Feature Key Expansion Unit (EU24BL)
The Feature Key Expansion Unit is an optional device that can be connected to your 4622SW
IP Telephone. The EU24BL contains 24 buttons onto which your System Administrator sets up additional IP Telephone features and/or call appearances (incoming and outgoing lines).
The EU24BL has a backlit display. For usage instructions, see the “EU24/EU24BL Expansion
Module User Guide” (Document Number 555-250-702, available at http://www.avaya.com/ support ).
Navigating Application Screens
Your 4622SW IP Telephone uses Phone Feature buttons, Line/Feature buttons, and Softkeys to allow you maximum flexibility in phone operation and application usage. While reviewing this
section, it can help to refer to Figure 1: 4622SW IP Telephone on page 12.
Phone Feature buttons are used in the Phone application and appear on the face of the telephone around the dialpad. Phone buttons have an icon on the top of the button, to indicate the button’s function. These buttons provide mostly call-handling features like Transfer,
Conference, Hold, or Redial. Two new phone Feature buttons are:
●
Phone/Exit ( to the display, and
) - used to exit call server-based features and restore the Phone screen
●
Options ( ) - used to access the Options function to set certain phone parameters and view phone/server/connection status and other information for troubleshooting.
The Page Left and Page Right buttons ( ) (between the Phone/Exit and Options buttons) are also considered phone buttons. Use them to move forward (Right Arrow) or backward (Left Arrow) from one display screen to another. These paging buttons work in conjunction with the paging indicators ( ) you may see on an application screen. Paging indicators show that a screen has more than one page, and allow you to navigate forward and back through those additional pages. To activate the function or feature represented by a phone button, just press the appropriate button.
Line/Feature buttons ( ) appear on both sides of the display area. These buttons provide call appearances (Lines) and other call-related features (as administered by your System
Administrator) in the Phone application. They also serve as application-specific buttons in the
Call Log or other applications. For example, pressing a Line/Feature button in the Call Log application selects the corresponding entry, allowing you to take further action with your selection. When you enter text on a screen (for example, a Speed Dial button label), several
Line/Feature buttons provide editing features like backspacing or hyphenation.
Issue 3 April 2006 15
Introducing Your 4622SW IP Telephone
Here is an example of the difference between a Line/Feature button’s functionality in the Phone application versus other applications. To call someone from the Phone application (the default display screen) you press the first Line/Feature (call appearance) button and dial your party. But in the Call Log application, pressing the first Line/Feature button displays detailed information about the first call log entry.
In addition to the call-related icons and features explained in Table 1 , the icons and background
display colors in
Table 2 are associated with certain administrable features on the call server,
and might appear on the display. Several features, such as flash, wink, and flutter, are associated with Call Center operations, and might not apply to all 4622SW users.
Table 2: Icons/Background Colors for Features on the 4622SW
Icon
Description/
Condition
None Feature is on/active.
None Feature is off/inactive.
None Feature denied (Broken Flutter). This is a temporary condition, accompanied by an “error beep” on the first occurrence. This condition then changes to the off/ inactive state.
None Idle. Indicates a (call appearance) line is available.
Ringing. Indicates an incoming call is arriving on this line.
Active. Indicates the line is in use.
Feature Button Display
Background Color
White
Light Gray
Light Gray
White
White
Light Gray
On Hold. Indicates a call is on hold on this line.
(Soft) Hold. Indicates this line's call was put on hold pending a conference or a transfer.
Flash. Used for Call Center operations.
Dark Gray
Dark Gray
Light Gray
Flutter. Used for Call Center operations.
Light Gray
Wink. Used for Call Center operations.
Light Gray
16 4622SW IP Telephone User Guide
4622SW IP Telephone Applications
Four softkeys ( ) appear directly below the display area. They allow you to access the other 4622SW applications. In an application, they allow you to perform application-specific functions, like add, save, edit, delete, or cancel. The labels above the softkeys reflect their function relative only to that specific screen.
4622SW IP Telephone Applications
Your 4622SW IP Telephone provides four applications (Phone, Speed Dial, Call Log, and Web).
Additionally, use the Options function to define settings, personalize your phone, and troubleshoot certain functions. All applications appear in the display area, accessed by the softkeys appearing below the display.
A brief description of each application follows.
Phone Application
The Phone application is the primary application. Use this application to make and receive calls, and perform call-handling operations like conference calling or transferring calls to another phone.
Chapter 2: Using Your 4622SW IP Telephone
provides information on using the Phone application.
Speed Dial Application
The Speed Dial application provides access to Speed Dial buttons, that facilitate automatic dialing. Use this application to:
● set up buttons for speed dialing,
● update Speed Dial button labels, or
● remove the label from a Speed Dial button.
Chapter 3: Using the Speed Dial Application describes how to set up, update and remove labels
from Speed Dial buttons. Calling using a Speed Dial button is covered in Chapter 2: Using Your
Issue 3 April 2006 17
Introducing Your 4622SW IP Telephone
Call Log Application
The Call Log application provides three lists, each showing up to 30 outgoing, incoming answered or missed calls. Use this application to call a person directly from the Call Log or to add a log entry’s name and phone number to a Speed Dial button. In addition, you can disable the Call Log for privacy purposes by setting the Call Log Disable option, as described in
Chapter 6: 4622SW IP Telephone Options .
Chapter 4: Using the Call Log Application covers viewing, deleting log entries, and adding a Call
Log entry to a Speed Dial button. Making a call from the Call Log is covered in
Web Access Application (Optional)
The Web Access application allows you to access Web pages reachable through links from a
Home page (and connected pages). This application is optional and is specifically administered by your System Administrator. Depending on the Home page links available, you can browse
Corporate intranet sites or browse the World Wide Web.
Chapter 5: Using the Web Access Application
covers navigating Web access screens and pages, and provides information about entering text on Web pages. Making a call from the Web
Access application is covered in Chapter 2: Using Your 4622SW IP Telephone
.
4622SW Telephone Options
Access the Options function using the Options ( ) button below and to the right of the display area. Using Options menus, you set certain phone parameters, such as display area contrast, how you want the Redial button to work, the language in which information displays, when you want your saved information backed up or restored, or how you want your Feature buttons labeled. You can also view telephone status screens for troubleshooting or information purposes.
Chapter 6: 4622SW IP Telephone Options covers all options.
18 4622SW IP Telephone User Guide
Additional 4622SW Functionality
Additional 4622SW Functionality
Push Feature
Your System Administrator can “push” a Web page, a text message, an audio message, or any combination of those items to your 4622SW IP Telephone. Depending on how the pushed material is administered, it may override what is otherwise presented by the telephone. In general, the pushed content is also accompanied by one or more notification tones. Specifically, your System Administrator can:
●
Use the telephone’s browser to display a specific Web page instead of displaying whatever you were viewing. Alternatively, the System Administrator can have a Web page available in the background, for you to view when you use the Web application. Typically, in this second case, you would generally get a message on the display’s top line alerting you to the waiting Web page.
●
Present a text message on the top display line. This message may temporarily overwrite whatever is otherwise displayed on the top line.
●
Present an audio message, even if you are on a call. If you are not on a call, the telephone usually goes off-hook automatically on the Speaker. If you are on a call, the party with whom you are speaking is automatically put on Hold and cannot hear the pushed message. Once you start hearing the pushed message, you can stop listening by selecting a Call Appearance Line (for example, the line you were on when the pushed message came in), going back on-hook, etc. Typically though, pushed audio messages involve emergencies or other important information, and should be listened to. Once a message completes, you can return to your existing call.
Automatic Backup/Retrieval Feature
If your telephone is appropriately administered, (see
), you can store your Speed Dial button data, options settings and other personal settings on an FTP (File
Transfer Protocol) server in your network. When you log in to any 4622SW IP Telephone supporting Release 2.1 or later software, that telephone attempts to retrieve your data from that server. Assuming both the original phone and the second phone are properly administered, this second telephone displays your data and settings, even if you have never used that particular phone before. Your System Administrator has more information about how this feature operates.
If the telephone supports the automatic retrieval procedure described in the previous paragraph, your phone also automatically stores changes you make to associated button data, settings, etc.
Issue 3 April 2006 19
Introducing Your 4622SW IP Telephone
20 4622SW IP Telephone User Guide
Chapter 2: Using Your 4622SW IP Telephone
Introduction
This chapter describes how to make calls, receive calls, retrieve voice mail messages, and log off your 4622SW IP Telephone. The telephone Line/Feature buttons that assist in call handling are also covered in this chapter.
Call Appearances
In the Phone application, a call appearance, by default, takes up the entire display width, while administered Feature buttons take up half the display width. When a call appearance is full-width, use the Line/Feature buttons on either side of that row to select that call appearance, and usually, all associated messages. When a call appearance is half-width, for example, the full width default has been changed, use only the Line/Feature buttons on the appropriate side of that row to select that call appearance. In the case of half-width call appearances, call-associated messages show on the top display line instead of on that row. See
Chapter 6: 4622SW IP Telephone Options for information about setting the call appearance
width.
Depending on how your phone is administered, you might have some blank Line/Feature button labels. Pressing a Line/Feature button associated with a blank label has no effect.
Making Calls
You can make calls by:
● activating your headset, or
● using an automatic dial feature like speed dial, redial, or abbreviated dialing.
This section describes these calling methods.
Issue 3 April 2006 21
Using Your 4622SW IP Telephone
Note:
Note:
You can set an option for whether the Phone screen displays when you make an outgoing call, or whether the current screen remains displayed. See
in Chapter 6: 4622SW IP Telephone Options
for details.
The 4622SW supports a one-way Speaker. When you activate the Speaker, you can hear the party at the other end, but that person cannot hear you. You must activate the headset to be heard.
Manual Dialing
1. Activate your headset.
If the Phone screen is active, the first available call appearance line displays the off-hook
( ) icon and the background appears shaded.
If the Phone screen is not active, the top display line provides call-related messages.
If applicable, the Call Timer displays at the top of the display area.
Note:
Note:
Displaying the Call Timer is optional and is set by means of the Options button.
See Chapter 6: 4622SW IP Telephone Options
for information.
2. Use the dialpad to enter the number you want to call.
The number entered displays on the active call appearance line and the 4622SW IP
Telephone initiates the call.
3. Deactivate the headset to end the call.
Automatic Dialing
Automatic dialing includes:
● redialing a previously called number,
● speed dialing a number programmed on a Speed Dial button,
● using an administered Abbreviated Dialing Feature button to initiate a call,
● dialing a party listed on your Call Log, or
● dialing a party from a Web page displayed through the Web Access application.
22 4622SW IP Telephone User Guide
Making Calls
Note:
Note:
Note:
The 4622SW supports a one-way Speaker. When you invoke automatic dialing without first activating your headset, the one-way Speaker activates. You can hear the party at the other end, but that person cannot hear you. You must use the headset to be heard.
Note:
The 4622SW IP Telephone often receives telephone numbers through the Call
Log or Web Access application that are not immediately “dialable.” For example, the Call Log might contain an incoming call from the following U.S. phone number: 732-555-1234. In general, if you try to dial that number as is, the call cannot go through—first you have to dial one or more digits to obtain an outside line, access your corporate telephone network, or add some other code before you can return the call. The 4622SW IP Telephone can, if appropriately administered, automatically dial those “extra” digits for you. So with one touch, the telephone automatically dials 91-732-555-1234. Your telephone administrator has information on setting up this Enhanced Dialing capability.
If all lines are in use, automatic dialing will not work.
Redialing a party
Depending on how you have set up your Redial option, selecting Redial automatically dials the most recent number dialed, or displays a list of the last six outgoing calls for selection of the number to be dialed.
Chapter 6: 4622SW IP Telephone Options , covers setting the Redial
feature. Both procedures follow.
Note:
Note:
Your Telephone Administrator can turn off the Redial feature, or can restrict your phone to dialing only the last number dialed. If the Redial feature is turned off, pressing the Redial button generates an error tone. If the Redial feature is restricted to only the last number dialed, follow the instructions below for
Redialing the Last Number Called.
Redialing the last number called:
Press the Redial ( ) Feature button.
The last number dialed is automatically redialed.
Issue 3 April 2006 23
Using Your 4622SW IP Telephone
Redialing using a list of the last six numbers called:
1. Press the Redial ( ) Feature button.
The Redial screen displays the last six unique numbers dialed and the prompt “Select
number to dial.” appears at the top of the display.
2. Press the Line/Feature button associated with the number you want to redial.
If the call can be dialed, the Phone application screen displays and the selected number
dials automatically.
If the selected number cannot be dialed (for example, if all call appearance lines are currently on Hold), all Redial entries are disabled. If you press a number for redialing while
in this state, an error beep tone sounds and no further action occurs.
3. Proceed with the call.
A Call Log entry is created for this call.
Dialing a party using a Speed Dial button
Automatic dialing of pre-stored numbers is the most common method of automatic dialing. You can set up Speed Dial buttons and select the party you want to call by pressing that button. For
information on setting up Speed Dial buttons, see Chapter 3: Using the Speed Dial Application .
Because the 4622SW IP Telephone’s advanced capabilities allow up to 108 speed dial entries, speed dialing as described here is convenient and efficient.
1. Press the SpDial softkey at the bottom of the display screen.
The first twelve Speed Dial buttons display, one name/number per button, and the prompt
“Select entry to dial” appears at the top of the display area.
2. If the party you want to call appears on the display, proceed to Step 3. If the party you want
to call is not shown, press the Page Right ( ) button to display the next page of entries,
Continue until the number/party you want displays. You can also press the Page Left ( ) button to display the preceding page of entries.
3. Press the Line/Feature button associated with the name/number of the person you want to call.
The number of the selected person dials automatically.
4. Activate the headset to proceed with the call.
5. Deactivate the headset to end the call.
24 4622SW IP Telephone User Guide
Making Calls
Automatically dialing a party using an administered Line/Feature button
Your System Administrator can program individual numbers on Line/Feature buttons (this is called Abbreviated Dialing). If so, such numbers display on the Phone application screen (or the
Feature Key Expansion Unit, if this optional device is attached to your phone) with labels assigned by the System Administrator.
If the label for the number you want to call appears in the display area, press the appropriate button, or
Press the Page Right ( ) or Page Left ( ) button(s) below the display area until the label of the party you want to call displays. Then press that button.
The number dials automatically and the screen displays the appropriate call appearance
line as active.
Note:
Note:
Usually, you can re-label administered Feature buttons as you see fit, as described in
Feature Button Labeling on page 68.
Calling a party from the Call Log
Your 4622SW IP Telephone maintains a log of up to 90 outgoing, incoming answered, and incoming unanswered calls to/from your phone. Each log can have up to 30 calls.
1. To call a party listed in the Call Log, press the Log softkey at the bottom of the display area.
The first six missed calls display, one name/number per button, and the prompt “Select
entry for details” appears at the top of the display area.
2. If the party you want to call is in a different Call Log, press the softkey that represents the
Call Log where that entry appears (either Outgo or InAns).
The selected Call Log displays.
3. If the party you want to call appears, proceed to Step 4. If the party you want to call is not
displayed, press the Page Right ( ) button to display the next page of entries. Continue until the number/party you want displays. You can also press the Page Left ( ) button to display the preceding page of entries.
4. Press the Line/Feature button associated with the name/number of the person you want to call.
The associated Call Detail screen displays.
Issue 3 April 2006 25
Using Your 4622SW IP Telephone
5. Select Call.
The phone goes off-hook and the selected party’s number is dialed. If the “Phone Screen on
Calling” option is set to “Yes” (as described in Chapter 6: 4622SW IP Telephone Options
)
the Phone application screen displays. A Call Log entry is created for this call.
Note:
Note:
If your administrator has set up the Enhanced Dialing feature, selecting Call causes the 4622SW to automatically add any appropriate digits (such as those required to get an outside line) to phone numbers in the Missed and InAns Call
Logs. If you press Call, but the call does not go through, check with your
Telephone Administrator to ensure that the Enhanced Dialing feature is set up properly for your environment.
6. Proceed with the call as usual.
See
Chapter 4: Using the Call Log Application
for more information about the Call Log.
Calling a party from the Web Access application
Your 4622SW’s optional Web Access application can automatically dial Web links designated by the Web page author as phone numbers. To call a party using a Web link, just select that link.
Note:
Note:
If your administrator has set up the Enhanced Dialing feature, selecting a link to call a party causes the 4622SW to automatically add any appropriate digits (such as those required to get an outside line) to phone numbers. If you select a call link, but the call does not go through, check with your Telephone Administrator to ensure that the Enhanced Dialing feature is set up properly for your environment.
Receiving Calls
When someone calls you and the Phone screen is active, the Bell ( ) icon appears as the phone rings and (if so administered) the Voice Message light flashes. When the Phone screen is active, call information displays on the incoming call appearance line. If the Phone screen is not active, call information appears on the top display line.
To receive the call, activate the headset and talk.
Note:
Note:
You can set an option for whether the Phone screen displays when you receive an incoming call, or whether the current screen remains displayed. You can also set an option to flash the Message Waiting Lamp when the phone rings. See
in Chapter 6: 4622SW IP Telephone Options
for details.
26 4622SW IP Telephone User Guide
Call Handling Features
Call Handling Features
The features described in this section are available while calls are in progress. Use the dedicated Feature buttons on the telephone itself, or administered Feature buttons available using the 4622SW’s softkeys, as applicable.
Note:
Note:
Features can also be accessed through an optional Feature Key Expansion Unit, described in
About the Feature Key Expansion Unit (EU24BL) .
Conference
The Conference feature allows you to conference up to the maximum number of parties set by your System Administrator.
Adding another party to a call
1. Dial the first party, then press the Conference ( ) button.
The line’s display area changes to white text with a dark gray background. The current call
is placed on hold, the Soft Hold ( ) icon displays, and you hear a dial tone.
2. Dial the number of the next party and wait for an answer.
3. Press the Conference () button again to add the new party to the call.
4. Repeat Steps 1- 3 for each party you want to conference in to the call.
Adding a held call to the current call
1. Press the Conference ( ) button.
The icon on the current line changes to the Soft Hold (
2. Press the Line/Feature button of the held call.
3. Press the Conference ( ) button again.
All parties are now connected.
) icon.
Dropping the last person added to the call
Press the Drop ( ) button.
The last party connected to the conference call is dropped from the call.
Issue 3 April 2006 27
Using Your 4622SW IP Telephone
Hold
The Hold feature puts a call on hold until you retrieve it.
Placing a call on hold
Press the Hold ( ) button.
(
The line’s display area changes to white text with a dark gray background, and the Hold
) icon displays.
Retrieving the held call
Press the Line/Feature button on which the call is being held, or press the Hold ( button.
The call is now active.
)
Mute
During an active call, the Mute feature prevents the party with whom you are speaking from hearing you. Using Mute, you can hold an off-line conversation at any time during a call.
Preventing the other person on the line from hearing you
1. Press the Mute ( ) button.
The other party cannot hear you. The indicator next to the Mute button lights when Mute is
active.
2. To reinstate two-way conversation, press the Mute ( ) button again.
Speaker
A one-way, built-in Speaker allows you to hear calls without activating the headset. Most importantly, note that the 4622SW’s Speaker does not allow two-way conversation. When you activate the Speaker, you can hear the party at the other end, but that person cannot hear you.
Note:
Note:
It is also possible to disable the Speaker feature entirely. If your Speaker does not operate as indicated, contact your System Administrator to ensure that your telephone's Speaker is properly administered.
28 4622SW IP Telephone User Guide
Call Handling Features
Using the Speaker with any feature
1. Press the Speaker ( ) button.
The indicator next to the Speaker button lights and the Speaker handles voice control. The
first available call appearance line activates.
2. Place a call, or access the selected feature.
3. Adjust the Speaker volume if needed by pressing the Volume Control ( button until you reach the desired volume level.
As you press the Volume Control button, the top display area shows the volume level.
)
Changing from the Speaker to the headset
Activate the headset.
The Speaker indicator next to the Speaker button goes off and audio control reverts to the
headset.
Changing from the headset to the Speaker
Press the Speaker ( ) button. The headset deactivates automatically.
The indicator next to the Speaker button lights and the speaker handles voice control. You
can hear the other party, but that person cannot hear you.
Turning the Speaker on during a call
Press the Speaker ( ) button.
The Speaker indicator next to the Speaker button lights. The Speaker is now operational.
Turning the Speaker off during a call
Activate the headset at any time.
The Speaker and the corresponding indicator light turn off. Voice control reverts to the
headset.
Ending a call while the Speaker is active
Press the Speaker button.
The Speaker and the corresponding indicator light turn off and the call terminates.
Issue 3 April 2006 29
Using Your 4622SW IP Telephone
Transfer
The Transfer feature allows you to transfer a call from your telephone to another extension or outside number.
Sending a call to another telephone
1. With the call active (or with only one held call and no active calls), press the Transfer
( ) button.
The call is placed on hold. The Hold (
the next available line activates.
) icon displays and you hear a dial tone while
2. Dial the number to which you want to transfer the call.
3. If you do not want to announce the call, press the Transfer ( ) button again and
proceed to Step 6. If you wish to wait for an answer and announce the call, see Step 4.
The call is sent to the extension or number you dialed. A two-second display message
indicates the transfer is complete.
4. Remain on the line and announce the call. If the line is busy or if no one answers, return to the call by pressing the Line/Feature button on which the call is being held.
5. Press the Transfer ( ) button again.
The call is sent to the extension or number you dialed. A two-second display message
indicates the transfer is complete.
6. Hang up your handset.
Retrieving a Voice Mail Message
When someone leaves a message in your voice mailbox, the Message Indicator ( red light at the top middle of the phone illuminates.
), the
Follow your standard voice mail retrieval procedures to retrieve your messages. If you have voice mail-related questions, contact your Telephone System Administrator.
30 4622SW IP Telephone User Guide
Logging Off the Phone
Logging Off the Phone
Log your 4622SW IP Telephone off to prevent unauthorized use during an absence. When multiple users share a phone, logging off protects your privacy by deleting your Call Log entries, and allows other users to load their specific telephone features from the call server.
You can also log off directly through the Options menu. See
in Chapter 6: 4622SW IP Telephone Options
for details. The process described here applies to all 4622SW IP Telephones.
Note:
Note:
Before you can log off, ensure that the telephone is on-hook and idle (no call appearance lines in use).
To log your phone off, press the Mute button, then press the following numbers on the dialpad: 5 6 4 6 3 3 # (which stand for LOGOFF)
A request to un-register the phone is sent to the server. The phone is now in a logged-off
state and displays “Ext =”.
Reinstating the Phone After a Logoff
To reinstate the phone after a logoff:
1. Using the dial pad, enter your Extension number, then press Pound (#).
The display prompts for entry of your password.
2. Using the dial pad, enter your Password, then press the # key.
The 4622SW is now ready for use.
Forcing a Login to the Phone
If you try to log your phone in, and “Extension in Use” displays, another person is already using the extension you entered.
If this is your extension, you can force the other user off the system by pressing Pound (#) to answer “OK” to both the Extension and the Password prompts.
Issue 3 April 2006 31
Using Your 4622SW IP Telephone
32 4622SW IP Telephone User Guide
Chapter 3: Using the Speed Dial Application
Introduction
This chapter describes how to add, update, and delete a Speed Dial button label. Up to 108
Speed Dial buttons are allowed, each containing a name and corresponding telephone number.
Entering Data on Speed Dial Screens
Review this section if you are unfamiliar with entering data using a telephone dialpad or using softkeys for editing functions.
Entering Characters Using the Dialpad
Use the dialpad keys 0 through 9, * and # to enter characters in a Name or Number field.
To select a field, press the Line/Feature button on either side of the field to which you want to move.
When entering a Name, the first press of a dialpad key displays the first alphabetic character associated with that key to the right of the current cursor position. This character is shown in upper case and the cursor does not move. A subsequent press of the same key replaces the character shown with the next alphabetic character assigned to that key (still in upper case), or the number assigned to that key, if all three alphabetic characters have been displayed.
For example, pressing the “2” on your dialpad displays the letter “A.” Pressing the 2 key again replaces the A with a “B,” pressing it again replaces the B with a “C” and pressing it again replaces the C with a “2.” Pressing it again redisplays the letter “A,” and so on. Pressing a different key moves the cursor one position to the right, displaying the first alphabetic character associated with that key. All letters after the first display by default in lower case. Repeat this key press/entry process to enter the rest of the party’s name. In addition, you can use the
Left Arrow ( respectively.
) and Right Arrow ( ) softkeys to move the cursor to the left or right,
When entering a telephone number in the Number field, your 4622SW IP Telephone recognizes a key press as a number (or typographic character such as * or #) and automatically moves the cursor to the right.
Issue 3 April 2006 33
Using the Speed Dial Application
Note:
Note:
You can enter text while on a call, but you automatically exit text entry mode if you go off-hook (either by the headset or by a fixed button like Transfer). You also exit text entry mode if you cause another screen to display (for example, by pressing Save or Cancel, or pressing the button).
Editing During or After Entry
Editing commands display below the Number field, next to certain Line/Feature buttons. The commands and their actions are:
●
Clear - Remove all characters from the field in which the cursor currently resides.
●
Case - Change the character to the right of the cursor from lower to upper case or vice versa, depending upon its original case. Note that when entering a name, the first character entered is initially displayed in upper case, with subsequent characters initially displayed in lower case letters.
●
Backspace - Delete the character to the immediate left of the cursor.
●
Apostrophe - Insert an apostrophe at the cursor position.
●
Comma - Insert a comma at the cursor position. In a Number field, a comma creates a short pause when the telephone automatically dials that number.
●
Hyphen - Insert a hyphen at the cursor position.
●
Space - Insert a blank space at the cursor position.
Note:
Note:
Some of the editing commands, such as Case, appear only when there is data in the field in which the cursor is positioned. Pressing one of these buttons causes the respective action to be taken at the current cursor position. For example, in entering the name “D’Aleo,” pressing the Line/Feature button labeled
Apostrophe after entering the letter “D” inserts an apostrophe following that letter.
34 4622SW IP Telephone User Guide
Entering Data on Speed Dial Screens
Name Entry Example
To add a Speed Dial button for Tom Brown, you would typically press the following dialpad number button/Right Arrow softkey in sequence:
8 (T)
666 (o)
6 (m)
(Right Arrow softkey to move the cursor one space to the right)
22 (b)
777 (r)
666 (o)
9 (w)
66 (n)
After entering this sequence, the display shows: Tombrown. By incorporating the editing Line/
Feature buttons during entry, you format the entry as: Tom Brown. Your actual key press sequence should be:
8 (T)
666 (o)
(Right Arrow softkey to move the cursor one space to the right)
6 (m)
Line/Feature Button 12 (Space)
22 (b)
Line/Feature Button 5 (Case; changes the “b” from lower to upper case)
777 (r)
666 (o)
9 (w)
66 (n)
Issue 3 April 2006 35
Using the Speed Dial Application
Adding a Speed Dial Button
To add a Speed Dial button:
1. Access the Speed Dial application by pressing the SpDial softkey.
The Speed Dial Main screen displays.
Note:
Note:
Your Telephone Administrator can turn off the ability to make changes to the
Speed Dial buttons. If this is the case, you will not be shown softkeys labeled
Add, Edit, or Delete, and you cannot perform any of those actions.
2. Press the Add softkey.
The Speed Dial Entry screen displays, with a cursor in the Name field, and with the prompt
“Use dialpad to enter Name (<14)”.
Note:
Note:
For assistance with entering information on this screen, see the previous section titled
Entering Data on Speed Dial Screens .
3. Use the dialpad to enter the name of the person being added to a Speed Dial button. Use up to 13 characters or press Cancel to return to the Speed Dial Main screen without adding a name. If you try to enter too many characters, the telephone ignores any after the maximum until you delete one or more of the characters already entered.
4. After completing the Name field, press the Line/Feature button to the left or right of the
Number field.
5. Use the dialpad to enter the telephone number of the person for whom you are adding the
Speed Dial button. Use up to 24 characters and any of the editing Line/Feature buttons to insert appropriate spaces in the number being entered. Include any trunk number(s) needed to obtain an outside line.
6. Verify the Name and Number entered in Steps 3 and 5 are correct. To change an entry, use
the Left Arrow softkey and/or the Right Arrow softkey to move the cursor to the right of the character(s) to be changed. Press the Backspace button to remove that character, and re-enter that character. Alternately, to erase a field entirely, press the Line/Feature button on either side of that field, then press the Clear Line/Feature button. You can then enter new data in the cleared field.
7. When the Name and Number are correct, press the Save softkey to add the information to a
Speed Dial button. (Press the Cancel softkey to exit without saving.)
The Name/Number entry is added to the Speed Dial list in alphabetical order by Name. The
Speed Dial Main screen redisplays, allowing you to verify that the new button is now
available for automatic dialing.
36 4622SW IP Telephone User Guide
Updating Speed Dial Button Label Information
Note:
8. To add another Speed Dial button, repeat this procedure from Step 2.
9. To exit the Speed Dial application, press the Phone/Exit ( ) button.
Note:
You can position an entry at the beginning of the list, out of alphabetical order, by placing a space, asterisk, etc. as the first character of the name. For example,
“*Bruce” will be placed before “Aaron” on the list.
Updating Speed Dial Button Label Information
Use the following procedure to change the name or number associated with a Speed Dial button.
1. Access the Speed Dial application by pressing the SpDial softkey.
The Speed Dial Main screen displays.
2. Use the Page Left and/or Page Right buttons as appropriate until the entry you want to update displays.
Note:
Note:
Your Telephone Administrator can turn off the ability to make changes to the
Speed Dial buttons. If this is the case, you will not be shown softkeys labeled
Add, Edit, or Delete, and you cannot perform any of those actions.
3. Press the Edit softkey.
The prompt “Select entry to edit” displays.
4. Press the Line/Feature button that corresponds to the button you want to update.
The Speed Dial Editing screen displays the prompt “Use dialpad to edit Number (<25).” with
the cursor positioned at the end of the Number field.
Note:
Note:
For assistance with entering information on this screen, see the previous section titled
Entering Data on Speed Dial Screens .
5. To change the telephone number, use the Left Arrow softkey and/or the Right Arrow softkey to move the cursor to the right of the character(s) to be changed. Press the
Backspace button to remove the character(s) and re-enter the character(s). The Number field allows up to 24 characters.
Note:
Note:
Pressing Delete while in the Name or Number field allows you to delete the entire
Speed Dial label (as covered in the next section,
Label ). Alternately, pressing Cancel at any time returns you to the Speed Dial
Main screen without updating the label.
Issue 3 April 2006 37
Using the Speed Dial Application
6. To change the name, press the Line/Feature button to the left of the Name field. Then use the Left Arrow softkey and/or the Right Arrow softkey to move the cursor to the right of the character(s) to be changed. Press the Backspace button to remove the character(s) and re-enter the character(s). The Name field allows up to 13 characters.
7. When the Name and/or Number is updated, press the Save softkey to add the information to a Speed Dial button. (Press the Cancel softkey to exit without saving.)
The Name/Number entry is updated, and all Speed Dial buttons are re-sorted in
alphabetical order by Name. The Speed Dial Main screen redisplays.
8. To update another Speed Dial button, repeat this procedure from Step 2.
9. To exit the Speed Dial application, press the Phone/Exit ( ) button.
Deleting a Speed Dial Button Label
To delete a Speed Dial button label:
1. Access the Speed Dial application by pressing the SpDial softkey.
The Speed Dial Main screen displays.
2. Use the Page Left and/or Page Right buttons as appropriate until the entry you want to delete displays.
Note:
Note:
Your Telephone Administrator can turn off the ability to make changes to the
Speed Dial buttons. If this is the case, you will not be shown softkeys labeled
Add, Edit, or Delete, and you cannot perform any of those actions.
3. Press the Delete softkey.
The prompt “Select label to delete” displays.
4. Press the Line/Feature button that corresponds to the button you want to remove.
The Speed Dial Deletion screen displays the prompt “Press Delete again to confirm.”
5. Visually verify that you want to delete the Name and Number displayed, then choose one of the following options:
If you want to
Cancel the deletion without removing this Speed Dial button.
Complete removing this Speed
Dial button.
Then
Press Cancel.
No deletion occurs. The Speed Dial Main screen displays.
Press Delete.
The label is removed. The remaining Speed Dial buttons are re-sorted by Name and the Speed Dial Main screen
displays.
38 4622SW IP Telephone User Guide
Chapter 4: Using the Call Log Application
Introduction
This chapter describes the three Call Logs available on your 4622SW IP Telephone. It also provides procedures for adding a Call Log entry to a Speed Dial button and deleting one or all
Call Log entries.
For information on calling a party listed in any Call Log, see
in
Your 4622SW IP Telephone of this guide.
Note:
Note:
Your Telephone Administrator can turn off the ability to display the Call Logs, or can turn off the ability to move Call Log entries to Speed Dial buttons. If the Call
Log feature has been turned off, the Call Log softkey is not labeled, and pressing the blank softkey has no effect. If the ability to transfer an entry to a Speed Dial button has been turned off, the softkey labeled Add to SD is not displayed.
About the Call Log
Call Logs are helpful for:
● tracking who called while you were away from the phone,
● redialing the number of a previous call you made, or
● obtaining telephone numbers from previous calls.
The 4622SW also allows you to set up a Speed Dial button for any call listed in a log, facilitating dialing of frequently called numbers.
All calls made to or from your 4622SW IP Telephone are added to one of three Call Logs -
Outgoing Calls, Incoming Answered Calls, and Missed (unanswered) Calls. The Missed Call
Log displays automatically whenever you access the Call Log application, but you can quickly access a different log if desired.
Each log has a main screen, which lists the calls in chronological order (newest to oldest) and a detail screen. The main screens provide the Name and Number of the calling or called party, if available. The Main screens also provide a time (for the current date) or date for calls prior to the current date. The details screen displays all this information (in a wider format), reminds you of what type of call it was, and allows you to take certain actions with that entry.
Issue 3 April 2006 39
Using the Call Log Application
Each Call Log can contain a maximum of 30 entries. When a log contains more than six entries,
Page Right and Page Left buttons help you scroll through the log six entries at a time. Calls are listed in order from top to bottom, the most recent call first.
Viewing a Call Log
To view a Call Log:
1. Access the Call Log application by pressing the Log softkey.
The Missed Call Log Main screen displays the Caller’s name, number, and time/date of the
first six unanswered calls.
Note:
Note:
All Call Log screens have the same fields, characteristics, and softkeys.
2. Choose one of the following options:
If you want to Then
Review the next six calls Press the Page Right button.
Review the last six calls
Review outgoing calls you made
Review calls you received and answered
Review missed calls
Press the Page Left button.
Press the Outgo softkey.
The Outgoing Calls Main screen displays.
Press the InAns softkey.
The Answered Calls Main screen displays.
Press the Missed softkey.
The Missed Calls Main screen displays.
Delete one or all entries from the log displayed
Return to the Call Log Main screen from a Detail screen
See the section in this chapter titled
See detailed information about a call Press the Line/Feature button to the left or right of that entry.
The appropriate Detail screen displays, as
applicable.
Press the Return softkey.
The Call Log displays incoming phone numbers as they are received from the call server. The
Call Log displays outgoing phone numbers as you dial them or as they are stored (saved) in the
Speed Dial application.
40 4622SW IP Telephone User Guide
Adding a Call Log Entry to a Speed Dial Button
Adding a Call Log Entry to a Speed Dial Button
To add a Call Log entry to a Speed Dial button:
1. Access the Call Log application by pressing the Log softkey.
The Missed Calls Main screen displays.
2. If the party for whom you want to create a Speed Dial button is listed on the Missed Calls
Log, proceed to Step 3. If the Missed Call Log does not list the party for whom you want to
create a Speed Dial button, press the softkey for that entry’s Call Log (Outgo, InAns).
The Outgoing or Incoming Answered Call Log Main screen displays, as applicable.
3. Press the Line/Feature button to the left of the party for which you want to create a Speed
Dial button.
The Detail screen for that entry displays. If the AddToSD softkey is not displayed, either your Telephone Administrator has turned off the ability to make changes to the Speed Dial buttons, or the maximum number (108) of Speed Dial buttons have labels. In the latter case,
you cannot add a new entry unless you first remove an existing entry.
4. Press the AddToSD softkey.
The Speed Dial Editing screen displays, to allow you to make a change to the name or number. The prompt “Use dialpad to edit Number (<25).” displays, with the cursor
positioned at the end of the Number field.
Note:
Note:
For assistance with entering information on this screen, see the section in
Chapter 3: Using the Speed Dial Application titled Entering Data on Speed Dial
5. If no Name/Number changes are needed, proceed to Step 8. To change the telephone
number, use the Left Arrow softkey, and/or the Right Arrow softkey to move the cursor to right of the character(s) to be changed. Press the Backspace button to remove that character and re-enter the correct character.
6. To change the name, press the Line/Feature button on either side of the Name field to move from the Number to the Name field.
7. Use the Left Arrow softkey, and/or the Right Arrow softkey to move the cursor to the right of the character(s) to be changed. Press the Backspace button to remove that character and re-enter the correct character.
8. After you update the Name and/or Number, press the Save softkey to add the information to a Speed Dial button. (Press the Cancel or Delete softkey to exit without saving.)
The Name/Number entry is updated, and all Speed Dial buttons are re-sorted in
alphabetical order by Name. The Speed Dial Main screen re-displays.
9. To exit the Speed Dial application, press the Phone/Exit ( ) button.
Issue 3 April 2006 41
Using the Call Log Application
Deleting Call Log Entries
You can delete a single Call Log entry or all entries on a specific Call Log.
Deleting a Single Call Log Entry
To delete a single Call Log entry:
1. Access the Call Log application by pressing the Log softkey.
The Missed Calls Main screen displays.
2. If the entry to be deleted is shown, proceed to Step 3. If the entry to be deleted is not shown,
use the Arrow keys to scroll through the Missed Calls Log or press the softkey for that entry’s Call Log (Outgo, InAns).
3. With the entry to be deleted displayed, press the Line/Feature button that corresponds to that entry.
The selected entry’s Detail screen displays.
4. Press the Delete softkey.
The prompt “Press Delete again to confirm” displays at the top of the screen.
5. Visually verify that you want to delete the Name and Number displayed, then choose one of the following options:
If you want to Then
Cancel the deletion without removing this Call Log entry.
Press Cancel.
No deletion occurs and the Call Log’s Main
screen displays.
Complete removing this Call Log entry.
Press Delete.
The entry is removed and the remaining entries on this Call Log remain sorted in chronological order.
The Call Log’s Main screen displays.
6. To exit the Call Log application, press the Phone/Exit ( ) button.
42 4622SW IP Telephone User Guide
Disabling the Call Log
Deleting All Entries from a Call Log
To delete all entries from a Call Log:
1. Access the Call Log application by pressing the Log softkey.
The Missed Calls Main screen displays.
2. To clear the Missed Calls Log, proceed to Step 3.
To clear the Incoming Answered Calls Log, press the InAns softkey to display that Call Log, then proceed to Step 3.
To clear the Outgoing Calls Log, press the Outgo softkey to display that Call Log, then proceed to Step 3.
3. Press the Delete All softkey.
The prompt “Press Delete again to confirm” displays.
4. Visually verify that you want to delete all entries for the Call Log, then choose one of the following options:
If you want to Then
Cancel the deletion without removing all of this Call Log’s entries
Complete the deletion of all entries for this Call Log
Press Cancel.
No deletion occurs and the Call Log’s Main
screen displays.
Press Delete.
The entries are removed. The Call Log’s
Main screen displays.
5. To exit the Call Log application, press the Phone/Exit ( ) button.
Disabling the Call Log
If desired, you can disable your Call Log. See Enabling/Disabling the Call Log
in
Chapter 6: 4622SW IP Telephone Options for details.
Issue 3 April 2006 43
Using the Call Log Application
44 4622SW IP Telephone User Guide
Chapter 5: Using the Web Access Application
Introduction
One of the exciting aspects of the 4622SW IP Telephone is its optional Web Access application.
You can actually use your telephone to access your Corporate intranet and the World Wide
Web.
Your System Administrator can optionally design a Home page on which your Web options reside or use an Avaya-provided Home page for this purpose. For security purposes, your
System Administrator can optionally require that an authentication screen display upon selection of the Web Access application. In this case you must submit a User Name and
Password before gaining access to the Home and other Web pages/sites.
Note that the Web Access application offers a basic browser capability. The application does not support all Internet data types, nor is it intended to replace your PC’s browser. The
4622SW’s Web functions are geared towards use on a small (six line) display screen, more like those of a Personal Data Assistant (PDA) or cellular telephone.
This chapter describes the basic functions available with the Web Access application. These functions include:
● accessing and navigating pages linked to the Home page,
● entering text on applicable Web pages, and
● setting up a Speed Dial entry for a name and associated telephone number found on applicable Web sites.
Because your System Administrator can customize the Web Access application for specific business use, not all features described in this chapter may apply. Other features that result from customizing may not be described here. For this reason, contact your System
Administrator for specific information about your Web Access application before proceeding.
Because customizing can affect the flow of Web-related activity, this chapter describes only the primary Web screen types.
Issue 3 April 2006 45
Using the Web Access Application
Web Access Authentication
Depending on how your Web Access application is administered, you might have to provide identification before gaining access to Web pages. If you do not know your User ID or
Password, contact your System Administrator for assistance.
1. If the Web Authentication input screen displays after selecting the Web softkey, use the dialpad to enter your User ID or Name.
Note:
Note:
For information on entering text using the dialpad, see the section in this chapter titled
Entering Characters Using the Dialpad .
2. Press the Line/Feature button to the left of the Password field and enter your password.
3. Choose one of the following options:
If you want to Then
Authenticate the ID and Password
Exit the Web application without authentication
Press the Submit softkey.
When your ID and password are authenticated,
the next page displays.
If your ID and/or password cannot be authenticated, appropriate error messages
display.
Press the Cancel or Back softkey.
The previous application or options screen
displays.
Navigating Web Pages
The Web Access application browser performs similarly to those on your PDA or cell phone.
Navigate Web pages using a combination of Line/Feature buttons and softkeys.
Note:
Note:
Calls made or received while working with the Web application have no impact on
Web access, Web page navigation, or Web page text entry.
46 4622SW IP Telephone User Guide
Navigating Web Pages
Navigating the Home Page and Other
Standard-Size Web Pages
To navigate the home page and other standard-size Web pages:
1. Access the Web Access screen by selecting the Web softkey at the bottom of the display area.
The Home page displays.
2. If a line is not selected (highlighted), first press the button or the
(Line/Feature buttons 8 or 11) to bring the line “in focus.”
3. Navigate the Home page and other Web pages as follows:
button
If you want to
Redisplay the Home page
Then
Press (Line/Feature button 9).
Any Web page loading/processing stops and
the Home page displays.
Press (Line/Feature button 10).
Refresh the current display
(re-display the current Web page)
Move down the Web page one text line, from the line currently highlighted
Move up the Web page one text line, from the line currently highlighted
Move the Web page down one page (to see the next six lines)
Move the Web page up one page
(to see the previous six lines)
Traverse multiple pages
Use a link to go to another page
Any Web page loading/processing stops and
the current page redisplays.
Press (Line/Feature button 11).
Press
Press
Press
(Line/Feature button 8).
(Line/Feature button 12).
(Line/Feature button 7).
Press the Page Right or Page Left button to navigate to the next or previous page, respectively.
Press the Line/Feature button to the left of the line that displays an underlined link.
Note:
Note:
You can view and scroll through images, if any are presented, as well as text.
Issue 3 April 2006 47
Using the Web Access Application
Entering Text on Web Pages
Text entry pages are those on which you can enter data, for example, a name, a Web address
(URL), or other identifying information. A set of square brackets between, identifies a page’s text entry areas.
, possibly with text in
1. To enter data, first press the Line/Feature button to the left of the line on which you want to enter text.
Four new softkeys display: Done, Bksp, and Space, with the fourth softkey labeled “alpha” by default. This softkey is called the Mode softkey because it changes the mode of text being entered. Any reference in this manual to the “Mode softkey” refers to the fourth
softkey when entering text on Web pages.
2. Use the dialpad to enter text. Use the softkey functions to facilitate your entry, as described below.
If you want to
Enter text
Erase any data entered and restore the text entry line to its original format
Save the text you have entered
Then
If you are unfamiliar with 4622SW Web text entry, see
Entering Characters Using the Dialpad below.
When you complete the current field/text line, either press the
Line/Feature button to the left of the next text line you want to enter, press one of the Line/Feature buttons on the right side of the display to move to a different line or page, or press the
Done softkey.
Pressing a left-side Line/Feature button displays a cursor in the text entry box.
Pressing a right-side Line/Feature button produces the result
indicated by the symbol next to that button.
Pressing Done deactivates the text entry mode.
Press the appropriate application-specific softkey, for example, Clear.
Any characters entered are removed.
Note: Application-specific softkeys are determined by the application developer, therefore the method of erasing or clearing entered text is subject to the application’s design.
Press the appropriate application-specific softkey, for example, Submit or Save.
Note: Application-specific softkeys are determined by the application developer, therefore the method of saving entered text is subject to the application’s design.
1 of 2
48 4622SW IP Telephone User Guide
Entering Text on Web Pages
If you want to Then (continued)
Change the case of an alphabetic character to/from lower (the default) to upper case
Enter a numeric character(s)
Place a symbol in the text entry field
Press the Mode softkey until ALPHA (upper case) or alpha
(lower case) displays, as appropriate. Then use the dialpad to select the characters you want to appear in that case.
Mode alpha displays all characters entered in lower case, and is the default mode. Mode ALPHA displays characters in upper case. Pressing the softkey “toggles” from one mode to the next.
Press the Mode softkey until Num displays, then use the dialpad to select the appropriate number(s).
Press the Mode softkey until Symbol displays. If the desired symbol is not currently displayed, press the More softkey to view additional symbols. To insert a symbol, press the Line/
Feature button to the right/left of the desired symbol as appropriate.
2 of 2
Entering Characters Using the Dialpad
Use the dialpad keys 0 through 9, * and # to enter characters in a text entry field/line.
When entering a name or other alphabetic text, the first press of a dialpad key displays the first alphabetic character associated with that key to the right of the current cursor position. This character is shown in the case displayed on the alpha softkey. The cursor does not move. A subsequent press of the same key replaces the character shown with the next alphabetic character assigned to that key. You can use the # and * keys to display those symbols, even in alpha and ALPHA mode.
For example, with the Mode softkey displaying “ALPHA” or “alpha,” pressing the “2” on your dialpad displays the letter “A” or “a,” depending upon which alphabetic mode is active. Pressing the 2 key again replaces the A with a “B” (or “b”). Pressing the same key again replaces the B with a “C” (or “c”). Pressing the same key again replaces the C with an “A” (or “a”), and so on.
Pressing a different key moves the cursor one position to the right and displays the first alphabetic character associated with that key. Repeat this key press/entry process to complete the text field. In addition, you can use the Bksp or Space softkeys to move the cursor to the left or right, respectively.
When the Mode softkey displays Num, your telephone recognizes a key press as a number (or a typographic character such as * or #), and advances the cursor one position to the right.
When the Mode softkey displays Symbol, use the Line/Feature buttons to select the desired symbol. Use the More softkey or the Page Right or Page Left buttons on the phone to access additional pages of symbols. When selected, the symbol is automatically inserted to the right of the last character in that field on that line, and you automatically return to the alpha mode.
Issue 3 April 2006 49
Using the Web Access Application
Adding a Speed Dial Button for a Web Site Telephone
Number
Some Web sites might include the ability to pass names and associated telephone numbers to the 4622SW IP Telephone. In such cases, applicable web pages display an AddToSD softkey, as provided by the Web site’s author.
1. Press the AddToSD softkey.
The Speed Dial Editing screen displays, to allow you to change the name or number. The prompt “Use dialpad to edit Number” displays, with the cursor positioned at the end of the
Number field.
Note:
Note:
For assistance with entering information on this screen, see the section in
Chapter 3: Using the Speed Dial Application titled Entering Data on Speed Dial
Your Telephone Administrator can turn off the ability to create Speed Dial buttons from the Web application. In this case, the AddToSD softkey does not display.
2. If no Name/Number changes are needed, proceed to Step 5. To change the telephone
number, use the Left Arrow softkey, and/or the Right Arrow softkey to move the cursor to the right of the character(s) to be changed. Press the Backspace button to remove that character and re-enter the correct character.
3. To change the name, press the Line/Feature button on either side of the Name field to move from the Number to the Name field.
4. Use the Left Arrow softkey, and/or the Right Arrow softkey to move the cursor to the right of the character(s) to be changed. Press the Backspace button to remove that character and re-enter the correct character.
5. When the Name and/or Number are updated, press the Save softkey to add the information to a Speed Dial button. (Press the Cancel or Delete softkey to exit without saving.)
The Name/Number entry is updated, and all Speed Dial buttons are re-sorted in
alphabetical order by Name. The Speed Dial Main screen re-displays.
6. To exit the Speed Dial application, press the Phone/Exit ( application if applicable.
) button or select another
50 4622SW IP Telephone User Guide
Chapter 6: 4622SW IP Telephone Options
Introduction
This chapter describes how to set or view phone parameters, including:
●
Displaying the Phone screen upon dialing/answering
●
Personalizing the ringing pattern
●
Determining how you want the Redial feature to work (redial the last number called or select from a list of the last six calls)
●
Displaying the Call Timer
●
Changing the rate at which messages display
●
Changing the display area’s contrast
●
Logging off
●
Backing up and restoring Speed Dial button data, Feature button labels, and options settings
●
Personalizing Feature button labels
●
Selecting a different language for the 4622SW user interface
●
Changing the width of displayed call appearances
●
Allowing the Voice message light to flash when the telephone rings
●
Disabling and re-enabling the Call Log
This chapter also covers how to verify the status of certain phone/server interactions. This information can be useful in troubleshooting problems or when discussing phone operation with your System Administrator.
Note:
Note:
Your Telephone Administrator can turn off your ability to set any of the options covered in this chapter. If all options have been disabled, pressing the Options
( ) button displays a message confirming you cannot set/change any options. If a specific option has been disabled, it no longer displays on corresponding row of the Options Main Screen, and pressing the unlabeled Line/
Feature button has no effect.
Issue 3 April 2006 51
4622SW IP Telephone Options
Accessing the Options Main Menus
To access the Options Main menu:
1. To access the Options application, press the Options ( below the softkeys.
) button to the right of and
The first of two Options Main screens displays.
2. Use the standard paging indicators to move between the two Options Main screens.
The six options categories displayed on the first Options Main screen are as follows:
Application Options – provides access to allow you to set the Redial option, set the
Phone screen display upon answering or calling options, set the display of Call Timers, set the Message Display Rate, set the Call Appearance Width, set Visual Alerting
(flashing message light on incoming calls), and enable/disable the Call Log.
Personal Ringing – provides access to the Personal Ringing Selection screen, to set a ring pattern other than that provided with your phone.
View IP Settings – provides access to the View Status Main screen, from which you can view IP Address information/status, quality of service (audio and signaling) status, interfaces status, and miscellaneous phone/status data.
Contrast Control – provides access to the Contrast Option screen, on which you adjust the 4622SW’s display area contrast.
Log Off – allows you to log the phone off for privacy and security purposes.
Network Audio Quality – provides access to the Audio Status screen, on which you can troubleshoot network delay and audio quality. Note that this option displays only when you are on a call.
The four options categories displayed on the second Options Main screen are:
Backup/Restore – provides access to the Backup/Restore Main screen, from which you can set automatic backups of Speed Dial, Options and Feature button label data, restore the previous backup file, set up and verify the status of your File Transfer
Protocol (FTP).
Feature Button Labeling – allows you to customize a label on a Feature button, if desired.
PC Ethernet Interface – allows you to specify communications settings between the telephone and your PC (if attached).
Select display language – allows you to change the display from the current language to up to any of eight alternate languages.
3. To select an option, press the Line/Feature button on either side of the desired option.
The respective Options screen displays.
52 4622SW IP Telephone User Guide
Application Options
4. To change the current setting, press the corresponding Line/Feature button.
The option setting may either “toggle,” present a screen for you to specify a setting, or ask you to choose from a list of alternatives.
5. After changing an option, use the appropriate softkey to continue.
6. To exit the Options application, press any of the softkeys labeled for other 4622SW applications (SpDial, Log, and Web). To return to the Phone application, press the Phone/
Exit ( ) button.
The procedures in the rest of this chapter describe each Options category in detail.
Application Options
Application options allow you to change call-related default options. You select this option from the Options Main screen, accessed by pressing the phone’s Options button. Two Application
Options screens are available. The first screen provides the functionality to change call-related settings. The second screen allows you to set visual alerting and enable/disable your phone’s
Call Log. Use the standard paging indicators to move between the two Application Options screens.
To change or set any Application screen option press the Line/Feature button on either side of that option. For example, if an option is set to “No” pressing the corresponding Line/Feature button changes the setting to “Yes.”
Setting the Redial Option
The Redial option provides one of two redial selections:
●
Automatically redial the last number called when the Redial button is pressed, or
●
Display a list of the last 6 unique numbers called when the Redial button is pressed, allowing you to choose the number you want redialed.
This is the default setting.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without changing the setting, press the Cancel softkey.)
After saving or cancelling, the first Options Main screen displays.
Issue 3 April 2006 53
4622SW IP Telephone Options
Setting the Phone Screen on Answer? Option
When the Phone Screen on Answer? option is set to Yes, the Phone screen appears in the display area when you answer a call, regardless of the screen with which you are working. You lose any unsaved work in progress (for example, labeling a Speed Dial button) when the Phone screen displays. The only exception is the Web Access application, which “remembers” the current Web page.
When the Phone Screen on Answer? option is set to No, answering an incoming call has no impact on the application screen displayed. The top display line, however, provides an appropriate message. This is the default setting.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without making a change, press the Cancel softkey.)
After saving or cancelling, the first Options Main screen displays.
Setting the Phone Screen on Calling? Option
When the Phone Screen on Calling? option is set to Yes, the Phone screen appears in the display area when you make a call, regardless of the screen with which you were working. You lose any unsaved work in progress (for example, labeling a Speed Dial button) when the Phone screen displays. The only exception is the Web Access application, which “remembers” the current Web page.
When the Phone Screen on Calling? option is set to No, making a call has no impact on the application screen displayed. The top display line, however, provides an appropriate message.
Note:
Note:
This is the default setting.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without making a change, press the Cancel softkey.)
After saving or cancelling, the first Options Main screen displays.
54 4622SW IP Telephone User Guide
Application Options
Setting the Display Call Timers? Option
Your 4622SW IP Telephone can display two types of call timers. The Call Timer displays in the top display area and provides the elapsed time you are connected on a call in h:mm:ss
(hours:minutes:seconds) format. The Hold Timer displays in the applicable call appearance area, showing the elapsed time a call is on hold.
When the Display Call Timers? option is set to Yes, the Call Timer displays on either the active call appearance line (if the Phone screen is displayed) or the top display line (if a screen other than the Phone screen is displayed). Likewise, when a call is on hold, the Hold Timer displays in the corresponding call appearance area or the top display line, depending on whether the
Phone screen is or is not displayed.
Note:
Note:
This is the default setting.
When the Display Call Timers? option is set to No, neither the Call Timer nor the Hold Timer displays. Call time data is still maintained by the phone for Call Log purposes.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without making a change, press the Cancel softkey.)
After saving or cancelling, the first Options Main screen displays.
Setting the Message Display Rate
Although rare, the call server can send messages to your phone that are longer than the display area. If this occurs, the first, and then the second, part of the message each display for a specific time interval.
The Message Display Rate can be either Fast (display interval is 2 seconds) or Slow (display interval is 3 seconds).
Note:
Note:
The default rate is Slow.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without making a change, press the Cancel softkey.)
Upon saving or cancelling, the first Options Main screen displays.
Issue 3 April 2006 55
4622SW IP Telephone Options
Setting the Call Appearance Width
When the Call Appearance Width is set to Full (the default), each line on which a call appears extends the full width of the display. Messages show in the call appearance display area. When this option is set to Half, the call appearance area is limited to half of the display area.
Call-related messages appear on the top display line.
1. To change this option, press the corresponding Line/Feature button.
The Call Appearance Width changes from Full to Half or Half to Full, as appropriate to the
active setting.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without making a change, press the Cancel softkey.)
Upon saving or cancelling, the first Options Main screen displays.
Setting Visual Alerting
When this option is set to No (the default), ringing is the only notification of an incoming call.
When set to Yes, your phone rings and your voice message indicator flashes to alert you to an incoming call.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without making a change, press the Cancel softkey.)
Upon saving or cancelling, the first Options Main screen displays.
Enabling/Disabling the Call Log
Your Call Log is a standard application that saves incoming and outgoing calls in one of three logs:
●
Incoming Answered calls,
●
Incoming Unanswered calls, and
●
Outgoing calls.
56 4622SW IP Telephone User Guide
Personal Ringing Options
Call Log Enabled (active) is the default. For privacy purposes, you can change the status to
Disabled, to stop call logging and delete any calls currently logged.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or save this setting by pressing the Save softkey. (To restore the previous setting without making a change, press the Cancel softkey.)
Upon saving or cancelling, the first Options Main screen displays. If you changed the status from “Disabled” to “Enabled” all incoming and outgoing calls will now be logged. If you changed the status from Enabled to Disabled, all calls from each Call Log are deleted and
future incoming/outgoing calls are not logged.
Personal Ringing Options
Your 4622SW IP Telephone has eight ringing pattern options. You can hear the patterns and select the one you prefer using the Personal Ringing option.
You select this option from the Options Main screen, accessed by pressing the phone’s Option button.
1. To hear a ring pattern, press the Line/Feature button to the left or right of any numbered pattern.
The Current Pattern number changes to the selected pattern, which rings once.
2. Repeat Step 1 until your preferred pattern appears as the Current Pattern.
3. Save the setting by pressing the Save softkey or to restore the previous setting without making a change, press the Cancel softkey.
The first Options Main screen displays.
Note:
Note:
Going off-hook, receiving a call, or losing power during ring pattern selection
interrupts the process, and you must start over from Step 1.
Adjust the ringer volume using the Volume Control buttons, as discussed in
Table 1: 4622SW IP Telephone Button/Feature Descriptions
.
Issue 3 April 2006 57
4622SW IP Telephone Options
Status Screen Viewing Options
Four views of telephone and system information are available. A user generally does not need to view this information. However, if problems occur, your System Administrator might ask you to report certain values from any status screen.
Note:
Note:
Status screen data can be viewed, but cannot be changed.
1. Select View IP Settings from the Options Main screen (accessed by pressing the phone’s
Option button).
The View Status Main Screen displays.
2. To select any option on this screen, press the Line/Feature button on either side of that option. When a screen has more than one page, the Paging Indicator displays. Use the
Page Right or Page Left Indicator buttons to scroll from one page to another as applicable.
3. To return to the first Options Main screen from any status screen, press the Return softkey.
Each option is described in the following sub-sections.
Viewing IP Address Status
IP (Internet Protocol) address information encompasses two screens and identifies certain components and connections. IP Address information includes:
● the location (address) of your phone on your system’s Call Server,
● the location and port (connection) of the Call Server itself,
● the call routing and mask addresses, and
● the identification of the File Server with which your telephone interacts.
Although technical in nature, your System Administrator might ask you for information to track questions about or problems with phone functions or connections.
Viewing Quality of Service (QoS) Status
QoS refers to several mechanisms used to improve audio quality over the network.
58 4622SW IP Telephone User Guide
Changing the Display Contrast
Viewing Interface Status
Your phone interacts with several system hardware devices and system software. This screen provides information about three of the main interfaces.
Viewing Miscellaneous Status
Three miscellaneous status screens provide additional information about your telephone and its connections, such as the model, serial number, and MAC address.
Changing the Display Contrast
On first-time startup, your 4622SW IP Telephone’s display area contrast is set to a mid-level.
To adjust it to better suit your work environment and lighting, 15 contrast levels are available.
Note:
Note:
If you have a Feature Key Expansion Unit (EU24/EU24BL) attached to your phone, you can also adjust its contrast with this option.
You might not be able to distinguish between all 15 contrast level settings. Some of the upper and/or some of the lower contrast level settings might appear identical to adjacent settings. This is normal.
1. Select the Contrast Control option from the Options Main screen (accessed by pressing the phone’s Option button).
2. If you do not have an EU24/EU24BL installed, skip this step and proceed to Step 3.
If you have an EU24/EU24BL attached to your phone, press the Line/Feature button on either side of the display line on which you see 4622SW. Doing so identifies that you want to adjust the telephone’s display contrast.
3. To brighten the contrast, press the Right Arrow softkey until you reach the desired contrast level. To dim the contrast, press the Left Arrow softkey until you reach the desired contrast level.
Each softkey press results in the level being increased or decreased, depending on which
arrow softkey you press. Chevron symbols provide visual confirmation of the current level.
4. Save the contrast level you set by pressing the Save softkey, or, to restore the previous setting without changing the contrast, press the Cancel softkey.
The first Options Main screen displays.
Issue 3 April 2006 59
4622SW IP Telephone Options
Viewing the Network Audio Quality
In the event you experience poor audio quality during a call, the problem is likely with your network. Your LAN Administrator might ask you to display this screen to diagnose or troubleshoot audio problems. Although technical in nature, this screen provides information that can help identify causes of poor audio quality.
Note:
Note:
The Network Audio Quality button displays only when you are on a call
(off-hook).
1. Select Network Audio Quality from the Options Main screen (accessed by pressing the phone’s Option button).
If administered, the Audio Status screen displays.
2. To return to the first Options Main screen, press the Return softkey.
Logging Off the 4622SW IP Telephone
Log your telephone off to prevent unauthorized use during an absence, or for privacy purposes.
Locate the Log Off option on the first Options Main screen.
CAUTION:
!
CAUTION:
Logging off deletes all Call Log entries and, unless automatic backup/restore is enabled, returns any options you might have changed to their default values.
1. To log your phone off from any application screen, press the Options button to the right of and below the softkeys.
The first of two Options Main screens displays.
2. Select the Line/Feature button on either side of the Log Off option.
The Log Off screen displays the prompt “Do you want to log off?”
3. To proceed, select the Line/Feature button on either side of Yes. To return to the Options
Main screen without logging off, select the Line/Feature button on either side of No.
Selecting Yes unregisters your phone from the call server, deleting your Call Log entries
and returning any options you might have changed to their default values.
Selecting No displays the first Options Main screen. Your phone remains logged on to the
network and your Call Log and options values remain unchanged.
60 4622SW IP Telephone User Guide
Backup/Restore Options
Reinstating the Phone After a Log Off
When your phone is logged off, the top line displays “Ext. =*.”
1. To reinstate your phone following a log off, use the dialpad to enter your Extension Number, then press the Pound (#) key.
The display prompts for entry of your password.
2. Using the dialpad, enter your PBX/switch Password then press the Pound (#) key.
The phone is now ready for use.
Backup/Restore Options
The 4622SW IP Telephone’s backup and restore options allow you to:
●
Back up your options/preference settings, your Speed Dial button labels, names, and numbers, and Feature button labels. This occurs automatically whenever you save a change to any one of those settings or buttons. Automatic backup protects this data against system failure, by allowing you to restore your backup file of active settings and button labels.
●
Restore options settings, Speed Dial button labels, names and numbers, and Feature button labels following a phone failure or replacement.
●
Establish or modify FTP (File Transfer Protocol) settings such as the network server address, directory path for saving backed-up data, and a User ID and Password for server access through your phone.
●
Verify whether an automatic backup has occurred.
Because each telephone system has unique characteristics and settings, modifying the Backup/
Restore options usually requires your System Administrator’s assistance. For example, it is unlikely that you know the specific Server IP Address to enter when setting up FTP parameters without consulting your System Administrator.
To verify or change any of these options, select Backup/Restore from the second Options Main screen. Doing so displays the Backup/Restore Main screen containing all related backup/ restore options and settings.
Note:
Note:
On the Backup/Restore Main screen, check the Automatic Backup setting to determine if your phone is already set for automatic backups. The default setting is Disabled, meaning automatic backup will not occur unless you change the setting to Enabled. If your system administrator has administered your Backup/
Restore Options to be disabled, you cannot enable them yourself.
Issue 3 April 2006 61
4622SW IP Telephone Options
Settings Saved During a Backup
When the Backup/Restore Option is properly administered, Backup/Restore saves the following settings and preferences:
●
Personalized Ring setting
●
Redial setting
●
Phone Screen on Answer? (yes/no)
●
Phone Screen on Calling? (yes/no)
●
Display Call Timers? (yes/no)
●
Message Display Rate (slow/fast)
●
Call Appearance Width (half/full)
●
Visual Alerting (yes/no)
●
Call Log Enable (yes/no)
●
4622SW Contrast setting
●
EU24/EU24BL Contrast setting
●
Display Language
●
Ethernet setting
●
Automatic Backup (yes/no)
●
FTP Server IP Address
●
FTP Directory Path
●
FTP User Name
62 4622SW IP Telephone User Guide
Backup/Restore Options
Setting the Automatic Backup Option
You must change the Automatic Backup setting to Enabled to automatically back up your options settings, Feature button labels, and Speed Dial button labels, names and numbers whenever you change any of these values. If this setting is Disabled, you might have to first provide additional information, such as the FTP server on which your backed up data will reside, before you can change the setting.
1. Check below the FTP Status line for one of the following messages and proceed as directed:
If Then
The message “Options,
SD entries, & feature button labels may be saved.” displays
No message displays
The message “An FTP
Server IP Address must be provided for this feature.” displays
Automatic backup is already enabled, and no further action is required. Select Return to display the second
Options Main screen.
To verify when the most recent backup occurred, see
Verifying Backup/Retrieval Status on page 64.
Proceed to Step 2 to change the automatic backup
setting from Disabled to Enabled, or select Return to display the second Options Main screen.
You must first provide the server address and/or directory in which to store your backup data.
Contact your System Administrator for this information and any specific instructions for your telephone system. Then add the server address as described in
Setting a User ID, Password, and other FTP (File
Transfer Protocol) Options on page 66, before
2. To automatically backup all your options settings, your Feature button labels, and your
Speed Dial information following a save to any of these values, select the Line/Feature button to the right or left of Automatic Backup.
The setting changes from Disabled to Enabled.
3. To save your selection, select Save. To exit without making a change, select Cancel.
The second Options Main screen re-displays.
Issue 3 April 2006 63
4622SW IP Telephone Options
Verifying Backup/Retrieval Status
To determine whether the most recent backup and/or retrieval was successful, select FTP
Status on the Backup/Restore Main screen.
The FTP Status screen displays the following messages for the last backup and the last retrieval, plus an individual status for each type of data:
Action Status/Meaning
Last Backup:
Last Retrieval:
SpDial:
Feature Buttons:
Options:
Note: A separate status displays for each one of the above applications.
Successful - Data was successfully backed up with no problems noted.
N/A - No backup was initiated (ensure that the Automatic
Backup setting is Enabled on the Backup/Restore Main screen).
In Progress - The 4622SW IP Telephone is currently backing up your data.
Failed - Backup could not be performed (for example, the server could not be accessed, the backup file cannot be accessed, etc.)
Successful - Data was successfully retrieved with no problems noted.
N/A - No retrieval was initiated.
In Progress - The 4622SW IP Telephone is currently retrieving your data.
Failed - Retrieval could not be performed (for example, the server might not be functioning, the backup file cannot be accessed, etc.).
Successful - Data of this type (Speed Dial, Feature buttons, or Options) was retrieved without problems.
N/A - No retrieval of the associated (Speed Dial, Feature buttons or Options) data started.
Failed - At least one invalid value was identified for the applicable data category (Speed Dial, Feature buttons or
Options). No retrieval of this type of data occurred.
Note:
Note:
In the event of backup/retrieval failure, the bottom line displays the last error message associated with the most recent attempt.
64 4622SW IP Telephone User Guide
Backup/Restore Options
Retrieving and Restoring Data from a Backup File
Restoring data from your most recent backup file is a two-step process. First you start backup file retrieval (usually following a system failure or phone replacement). Then you confirm that you want the retrieved data to replace the phone’s current data.
Note:
Note:
Retrieving and restoring backup data takes only a few seconds, however, while in progress, no other phone activity is allowed.
1. Select Retrieve Stored Data from the Backup/Restore Main screen.
The 4622SW attempts to start FTP (File Transfer Protocol) to retrieve the latest backup file from the server. The message “FTP Retrieval in progress...” displays. Any one of the
following additional messages can display, as appropriate:
If Then
Following server connection, the backup file is retrieved with data in the proper format
Connection to the FTP server cannot be made
Connection is made with the
FTP server, but the file is not in the specified directory or cannot be retrieved for any reason
The messages “File successfully retrieved.” and
“Press Save to replace current data with retrieved data.” display.
Select Save.
All previous values are replaced with the backup file data. The Backup/Restore Main screen
re-displays.
The message “Cannot access FTP server.” displays.
Select Retry. If the connection is made, review the previous messages for a successful retrieval and proceed accordingly.
If the connection still cannot be made, the server might be busy or not functioning. Select Cancel to return to the Backup/Restore Main screen and try the Restore procedure again later.
Optionally, verify with your System Administrator that the Server’s IP Address is correct.
The message “Cannot obtain file.” displays.
Contact your System Administrator for instructions on how to proceed.
2. If you want to return to the Backup/Restore Main screen without retrieving or restoring the backup file, select Cancel.
The retrieval or restoration of backup data is cancelled, and any partially retrieved data is
discarded. The Backup/Restore Main screen re-displays.
Issue 3 April 2006 65
4622SW IP Telephone Options
Note:
Note:
Your Telephone Administrator can turn off the ability to make changes to the
Speed Dial buttons. In this case, you will be able to retrieve the backup file as normal, but any changes you may have made to that backup file’s Speed Dial button label data are ignored.
Setting a User ID, Password, and other FTP
(File Transfer Protocol) Options
Your System Administrator establishes certain parameters for each 4622SW IP Telephone in your network. Most parameters are established at the network server and apply to all telephones on the network. Other parameters can be unique to a specific site, department, or group of telephones. Those settings which can be unique to your phone appear on the FTP
(File Transfer Protocol) Setup screen. They are:
●
Server IP Address - the specific server to which your 4622SW IP Telephone is connected, for backup, restore, and other network-related functions. If your phone has been repaired, this value is set to zero and should be re-established.
●
Directory Path - the server location to which your telephone’s data (for example, Speed
Dial labels, names and numbers, options and Feature button labels) is sent during a backup, and from which data is restored.
●
User ID and Password - unique identifiers assigned to a phone user for server security purposes.
Note:
All FTP settings are set to blank upon phone manufacture and repair.
Note:
Because FTP information can impact both server operation and the proper backup of your phone data, contact your System Administrator before updating any settings.
The User ID and Password in the following procedure provide access to your server. Such access allows you to perform backup and other (future) server-related features. The User ID and Password are not the Avaya
Communication Manager registration ID and password, which identify you as an authorized user of your respective system.
1. To update any of the FTP settings, select FTP Setup from the Backup/Restore Main screen.
The FTP Settings Main screen displays.
66 4622SW IP Telephone User Guide
Backup/Restore Options
2. Choose one of the following options:
If you want to Then
Add or update the
Server IP Address
Add or update the directory path (to which backup saves your data)
Add or update the
[Server] User
Name
Select the Line/Feature button next to Server IP Address.
The FTP Server Address Input screen displays. The top display area prompts “Enter IP address” (if no server name is currently assigned) or “IP Address or DNS name (<17)”
(if you are modifying an existing server address).
Use the dialpad and any applicable Line/Feature buttons to enter the 16 character or fewer server address/name. (See
Entering Characters Using the Dialpad and
in Chapter 3: Using the Speed Dial Application
for information about data entry.) Select Save to save the setting and return to the FTP Settings Main screen.
Select Directory Path.
The FTP Directory Path Input screen displays. The top display area prompts “FTP Directory Path (<23).”
Enter the path provided by your System Administrator (22 or fewer characters) using the dialpad and any applicable Line/
Feature buttons. (See
and Editing During or After Entry
3: Using the Speed Dial Application
for information about data entry.) Select Save to save the setting and return to the
FTP Settings Main screen.
Alternately, you can select Clear to remove the current path prior to entering a new path or you can select Cancel to return to the Backup/Restore Main screen without changing the current path.
Select User Name.
The FTP User Name Input screen displays. The top display
area prompts “FTP User Name (<16).”
Use the dialpad and any applicable Line/Feature buttons to enter the User Name (15 or fewer characters) that gives you access to the server. (Either your System Administrator provides the name or you select this name using
parameters provided by the administrator). (See Entering
Characters Using the Dialpad and
in Chapter 3: Using the Speed Dial Application
for information about data entry.)
Select Save to save the setting and return to the FTP
Settings Main screen.
1 of 2
Issue 3 April 2006 67
4622SW IP Telephone Options
If you want to Then (continued)
Add or modify your Server
Password
Return to the FTP
Settings Main screen without changing the selected FTP setting
Select Password.
The FTP Password Input screen displays. The top display area prompts “FTP Password (<13).”
Use the dialpad and any applicable Line/Feature buttons to enter the Password (using parameters provided by your
System Administrator). Select Save to save the setting and return to the FTP Settings Main screen.
Select Cancel.
No change is made and the FTP Settings Main screen
re-displays.
2 of 2
3. Repeat this procedure from Step 1 for each FTP setting you want to add or modify.
Feature Button Labeling
Line/Feature buttons ( ) appear on both sides of the telephone’s display area. These buttons provide call appearances (Lines). These buttons also provide other call-related features
(provided with your telephone system or administered by your System Administrator) in the
Phone application. Line/Feature buttons also serve as application-specific buttons in other applications, such as the Call Log. Line/Feature buttons also appear on the optional EU24/
EU24BL Feature Key Expansion Unit, if one is attached.
You can use the Feature Button Labeling option to re-label any of the Phone application Line
(call appearances) and/or Feature buttons. For example, one of your Feature buttons might be labeled CFwd for Call Forwarding but you want it to read simply Fwd. Alternatively, if you have re-labeled several Feature buttons and want to restore the default (original) labels, you can use this option to view default label values and restore them if desired.
1. Select Feature Button Labeling on the second Options Main screen.
The Feature Button Labeling Options screen displays.
2. If an optional EU24/EU24BL Feature Key Expansion Unit is attached, move to those button labels either by pressing the Page Right ( ) button until you pass the 4622SW’s local button labels, or by pressing the Page Left ( ) button to immediately display the bottom half of the EU24/EU24BL labels.
68 4622SW IP Telephone User Guide
Feature Button Labeling
3. Choose one of the following options:
If you want to Then
Re-label one or more Feature buttons
View the default labels for your
Feature buttons
Restore the default labels to all your
Feature buttons
Return to the second
Options Main screen without changing the
Feature buttons
Select Relabel feature buttons.
The Feature Button Relabeling screen displays.
Proceed to Step 4.
Select View default labels.
The Default Feature Button View screen displays.
Review the default labels, then select Return to re-display the Feature Button Labeling Options screen.
Repeat Step 3, selecting a different option.
Select Restore default labels.
The Restore Default Feature Button Labels screen displays. The prompts “Restore all Feature Button labels to
default settings?” and “Press Default to confirm.” display.
To restore the default labels, select Default. To return to the Feature Button Labeling Options screen without making a change, select Cancel.
The Feature Button Labeling Options screen displays.
Select Return.
No change is made and the second Options Main screen
re-displays.
4. If Right/Left Page indicators appear in the softkey button area, your phone has more than one page of Feature buttons. Use the Right or Left Page button to move to the page on which you want to re-label one or more Feature buttons.
As you move from page to page, the top display area shows the current page number.
Note:
Note:
Your System Administrator might have “locked” one or more labels so that you cannot edit them. These locked labels are shaded in white. When you cannot change a locked button, an error beep tone sounds when you select that button.
5. Select (press) the Feature button you want to re-label.
The Feature Button Label Editing screen displays. For reference, the current label appears
next to the first Feature button.
Issue 3 April 2006 69
4622SW IP Telephone Options
Note:
6. To re-label a Feature button, use the dialpad and any applicable Line/Feature buttons, to enter the new label (13 or fewer characters). To restore the default label to the selected
Feature button, select Clear to remove the label you previously defined. (See
and Editing During or After Entry
Speed Dial Application for information about data entry.)
7. Select Save to save the new/modified label (or to restore the default label as applicable).
Alternately, select Cancel to exit the screen without saving a change or restoring the default label.
The Feature Button Labeling screen re-displays.
Note:
Some Feature buttons might be provided as part of your telephone software. In the event of a software upgrade, such standard Feature button labels might be overwritten with a new, standard label, erasing any re-labeling you may have performed.
Changing a Phone/PC Ethernet Interface
The 4622SW IP Telephone ordinarily communicates with any optionally-attached PC in auto-negotiation mode. This basically means the PC and telephone together decide how to communicate when they are connected. Although unlikely, there might be an occasion where you or your System Administrator want to force this communication to a particular setting.
1. Select PC Ethernet interface from the second Options Main screen.
The PC Ethernet Interface screen displays showing the current setting.
2. Press the Line/Feature button on either side of the desired setting.
The Current setting changes to your selected setting.
3. To save your selection, select Save. To restore the original setting without changing it, select Cancel.
The second Options Main screen redisplays.
70 4622SW IP Telephone User Guide
Selecting an Alternate Language
Selecting an Alternate Language
Users can change the user interface language their 4622SW IP Telephones display.
The 4622SW IP Telephone’s standard language configuration supports the following languages:
●
English (the default display language)
●
Français
●
Italiano
●
Japanese (Katakana only)
●
Español
●
Deutsch
●
Nederlands
●
Português
A given 4622SW IP Telephone supports one of three language configurations:
●
The standard configuration described in the list preceding this one
●
English, Chinese, Russian, and Hebrew
●
English, Japanese (Katakana and Han characters), Russian, and Hebrew
The Language Selection screen identifies which configuration applies to your 4622SW IP
Telephone.
1. Select Select display language on the second Options Main screen.
The Language Selection screen displays.
2. Select the Line/Feature button next to the language you want your phone to display when in use.
If the currently active language was selected, the second Options Main screen re-displays
and no action is taken.
If any language other than the currently active language was selected, the Language
Confirmation screen displays. The prompt “Are you sure?” displays in the currently active language and in the new language you selected. The four softkeys at the bottom of the display are labeled respectively “Yes” and “No” in both the currently active language and the
selected new language.
Issue 3 April 2006 71
4622SW IP Telephone Options
3. Choose one of the following options:
If you want to Then
Proceed to change the current language to the new language
Retain the currently active language without changing the user interface display language
Select either Yes softkey.
The active language changes to the new language you selected. The second Options Main screen re-displays. All screens now display the new user
interface language.
Select either No softkey.
The language remains unchanged and the
Language Selection screen re-displays.
Repeat the procedure from Step 2 to select a different language, or select Return to return to the second Options Main screen.
72 4622SW IP Telephone User Guide
Chapter 7: Headsets
Introduction
This chapter provides information about headsets that are compatible with your IP telephone.
Headsets for 4600 Series IP Telephones
Avaya supports only those headsets and headset adapters that carry an Avaya brand or logo.
There are a variety of Avaya headsets that are compatible with your 4600 Series IP Telephone.
To see the available headsets, go to http://www.avayaheadsets.com
.
Headsets require headset adapters/connectors to operate. Avaya offers three types of headset adapters for 4600 Series IP Terminals:
●
The MIP-1 provides remote call answering and call initialization features with the Avaya
Cordless Headset.
●
The Modular base amplifier (M12LUCM), which is a high-performance solution for users who continuously wear headsets, and
●
The HIP cord, which allows basic, direct headset connection to your Avaya IP telephone.
Avaya also offers a cordless headset solution (LKA10) with up to a 150 ft. mobile range from the base. The LKA10, when used with the MIP-1, offers remote call answering and call initialization features on the 4610SW, 4620SW/4621SW, 4622SW and 4630SW IP Telephones. The MIP-1 must be ordered separately. The LKA10, when used without the MIP-1, operates with other
Avaya IP telephones, but cannot be used for remote call answering or call initialization.
The table below summarizes Avaya’s corded headset connectors and cordless headset choices, and provides ordering codes.
Headset Connector Type
M12LUCM
HIP Cord
Corded
Corded
LKA10 (includes Headset) Cordless Solution
MIP-1 Accessory
Ordering Code
407639715
700212442
408271385
700281074
Issue 3 April 2006 73
Headsets
74 4622SW IP Telephone User Guide
Chapter 8: Telephone Management and
Troubleshooting
Introduction
The 4600 Series IP Telephones are relatively trouble free. This chapter provides helpful information for:
●
Interpreting the different ringer tones you hear.
●
Interpreting the 4622SW’s display symbols.
●
Testing your telephone to ensure that it is operating correctly.
●
Basic Troubleshooting. This chart provides the most common problems an end user might encounter and suggested resolutions.
●
Application-specific troubleshooting. This chart describes problems and solutions specific to a 4622SW application (Phone, Speed Dial, Call Log, or Web Access).
●
Resetting or power-cycling your phone, when Basic Troubleshooting does not resolve a problem.
Additionally, Chapter 6: 4622SW IP Telephone Options describes several status screens to use
to troubleshoot certain problems, as requested by your System Administrator. For all other IP
Telephone questions or problems, contact your System Administrator.
Interpreting Ringer Tones
As you become more familiar with your IP Telephone, you will recognize the various tones you hear in response to an incoming call or while using the handset. The following chart provides an overview of the tones you hear. Check with your System Administrator to verify if the descriptions are accurate for your system. Ringing Tones accompany an incoming call.
Feedback Tones are those which you hear through the handset (receiver) or the speaker.
Note:
Note:
The PBX, not the telephone, generates these tones, which can differ from this list. This difference is especially true when the PBX is outside the United States.
Issue 3 April 2006 75
Telephone Management and Troubleshooting
Ringing (Incoming) Tones
1 Ring --------
2 Rings ------- -------
3 Rings ------ ------ ------
Half Ring (ring-ping) ---
Feedback Tones
Busy --- --- ---
Call Waiting Ringback Tone ---_
Confirmation -- -- --
Coverage -
Dial ---------
Intercept/Time-out -_-_-_-
Recall Dial - - - -----------
Reorder -- -- -- -- -- --
Ringback ---- ---- ---- ----
Meaning
Call from another extension.
Call from outside or the System
Administrator.
Priority call from another extension, or from an Automatic Callback call you placed.
A call is being redirected from your phone to another because Send All Calls or Call
Forwarding All Calls is active.
Meaning
Low-pitched, rapid tone (repeated 60 times per minute), signifying the number dialed is in use.
A ringback tone with lower-pitched signal at the end. This indicates the extension called is busy and the called party was given a call waiting tone.
Three short tone bursts. This indicates a feature activation or cancellation was accepted.
One short tone burst. This indicates your call will be sent to another extension for a covering user to answer.
Continuous tone indicating dialing can start.
Alternating high and low tone indicating a dialing error, denial of a requested service, or failure to dial within a preset interval
(usually 10 seconds) after lifting the handset or dialing the previous digit.
Three shorts tone bursts followed by a steady dial tone indicate a feature request was accepted and dialing can start.
Fast busy tone repeated every half-second indicate all phone trunk lines are busy.
Low-pitched tone repeated 15 times a minute indicates the number dialed is ringing.
76 4622SW IP Telephone User Guide
Interpreting Display Icons
Interpreting Display Icons
As you become more familiar with your IP Telephone’s display, you will recognize the icons or symbols associated with the state of a call or the state of the phone. This chart provides an overview of the icons you might see. Check with your System Administrator to verify if the descriptions are accurate for your system.
Icon
No Icon Displayed
Meaning
Idle. Indicates the line is available.
Active. Indicates the line is in use.
On Hold. Indicates a call is on hold on this line.
Ringing. Indicates an incoming call is arriving on this line.
(Soft) Hold. Indicates this line's call was put on hold pending a conference or a transfer.
Testing Your Phone
The Test feature allows you to verify that your telephone's lights and display are operating properly.
Testing the Telephone's Lights and Display
1. With the telephone idle (on-hook), press and release the Mute button, then press the following numbers on the dialpad: 8 3 7 8 # (which stand for TEST).
The display indicates the self-test has started. If the test is successful, the message “Self test Passed #=end” displays. If the test is not successful, the message “Self test Failed
#=end” displays instead.
Issue 3 April 2006 77
Telephone Management and Troubleshooting
2. Press # to return to the Phone screen.
If nothing appears on the display and the phone is receiving power, your phone might need to be replaced. Contact your System Administrator for assistance or additional troubleshooting information.
Basic Troubleshooting Chart
Problem/Symptom
Phone does not activate after connecting it the first time
Phone does not activate after a power interruption
Phone worked earlier but does not currently appear to work
Speaker does not operate
Suggested Solution
Unless your System Administrator has already initialized your telephone, you might experience a delay of several minutes before it becomes operational. Upon plug-in, your telephone immediately starts downloading its operational software, its IP address, and any special features programmed by your System Administrator from the server to which it is connected. Report any delay of more than 10 minutes to your System Administrator.
Allow a few minutes for re-initialization after unplugging, powering down the phone, server problems, or other power interruption causes.
Contact your System Administrator.
Phone does not ring
Display shows an error/ informational message
Ask your System Administrator if your Speaker was disabled.
Use the Up/Down Volume keys to set your ringer volume to a higher level.
From another phone, place a call to your extension to test this suggested solution.
Most messages involve server/phone interaction.
If you are on a call and the display suddenly shows
“Discovering...,” the network connection between the telephone and the call server was interrupted, but your call stayed connected. The telephone automatically starts to re-register with the call server, but until re-registration succeeds, you do not have access to switch features and functionality such as Transfer, or to administered Feature buttons.
If you cannot resolve the problem based on the message received, contact your System Administrator for resolution.
1 of 2
78 4622SW IP Telephone User Guide
Basic Troubleshooting Chart
Problem/Symptom
Characters do not appear on the Display screen
Audio quality is poor, specifically, you hear an echo while using a headset, static, sudden silences (gaps in speech), clipped or garbled speech, etc.
No dial tone
A feature does not work as indicated in this guide (for example, the Redial button does not operate as described)
All other IP Phone problems
Suggested Solution (continued)
See Phone does not activate after connecting it the first time .
Check all lines into the phone to ensure that it is properly connected.
Check the power source to ensure that your telephone is receiving power.
Perform the following Test procedure: with the telephone idle (on-hook), press and release the Mute button. Then press the following numbers on the dialpad: 8 3 7 8 #
(which stands for TEST). The display should indicate the self-test has started, then report if the test was successful or failed. If nothing appears on the display, and the phone is receiving power, your phone might need to be replaced.
If these suggested solutions do not resolve the problem, reset or power cycle the phone with your System
Administrator’s assistance.
Various potential network problems might be causing the problem.
Access the Network Audio Quality screen (described in
Viewing the Network Audio Quality in
) to provide your System
Administrator with specific information related to this problem.
Contact your LAN Administrator with as complete a description of the problem as possible.
Check that both the headset and line cords into the phone are securely connected. Note that there might be a slight operational delay if you unplug and reconnect the phone.
Reset or power cycle the phone with your System
Administrator’s assistance. (See the section titled
Resetting and Power Cycling the IP Telephone
for details.)
Contact your System Administrator if these steps do not produce the desired result.
Verify the procedure and retry. For certain features, you must activate the headset first or place the phone off-hook.
Contact your System Administrator if this action does not produce the desired result. Your telephone system might have been specially programmed for certain features applicable only to your installation.
Contact your System Administrator.
2 of 2
Issue 3 April 2006 79
Telephone Management and Troubleshooting
Troubleshooting 4622SW Applications
Problem/Symptom Suggested Resolution
GENERAL:
A feature does not work as indicated in this guide, or does not work as it had previously worked
You are logging on to a new telephone and your old data and settings are not being displayed
PHONE APPLICATION:
Verify the procedure and retry.
Check below to troubleshoot the specific application with which you are working.
Ensure that any options have not been changed.
Contact your System Administrator if these actions do not produce the desired result.
Your new telephone is not retrieving data from the same location as your original telephone, or you need to provide a User Name and Password.
Follow the procedure in
to administer your current telephone with the necessary parameters. If this procedure does not solve the problem, contact your System Administrator.
Review the previous section, Basic
.
SPEED DIAL APPLICATION:
You cannot dial out using any
Speed Dial button
You cannot add an entry to the
Speed Dial list
At least one Speed Dial entry is missing or contains erroneous characters
Verify that all call appearances (incoming/ outgoing lines) are not already in use. If all lines are in use, wait until a line is available to make your call.
You have 108 Speed Dial entries, the maximum allowed. You must delete at least one entry before adding a new entry.
Someone edited the FTP backup file and failed to insert a blank line at the beginning of the file, and/ or failed to save the file in UTF-8 format. Edit the file, insert a blank line at the beginning of the file, and save the file in UTF-8 format. (Contact your
System Administrator if you have questions on editing the file yourself.) Then retrieve the file
from the telephone, as explained in Retrieving and Restoring Data from a Backup File .
1 of 2
80 4622SW IP Telephone User Guide
Troubleshooting 4622SW Applications
Problem/Symptom Suggested Resolution (continued)
CALL LOG APPLICATION:
You cannot dial out after selecting a Call Log entry
You cannot add an entry to the
Speed Dial list
Dialing from this application does not go through
The Call Log is empty
Your administrator must administer settings for the Enhanced Dialing feature beyond the defaults.
Check the Options screen to ensure that the Call
Log is not Disabled. Many events can clear the
Call Log, including power failures, restarting the telephone after logging off, etc.
WEB ACCESS APPLICATION:
Pressing the Web softkey does not display a Web site
Check with your LAN Administrator to determine if the Web server is not operating, if there are network connectivity problems, or other network problems.
Dialing from this application does not go through
You cannot add an entry to the
Speed Dial list
Check that all call appearances (incoming/ outgoing lines) are not already in use. If all lines are in use, wait until a line is available to make your call.
You have 108 Speed Dial entries, the maximum allowed. You must delete at least one entry before adding a new entry.
Your administrator must administer settings for the Enhanced Dialing feature beyond the defaults.
You have 108 Speed Dial entries, the maximum allowed. You must delete at least one entry before adding a new entry.
OPTIONS:
No Options other than “View IP
Settings” display
Your administrator has turned off all user-settable options.
2 of 2
Issue 3 April 2006 81
Telephone Management and Troubleshooting
Resetting and Power Cycling the IP Telephone
Reset your IP Telephone when other troubleshooting suggestions do not correct the problem or after being advised to do so by your System Administrator.
CAUTION:
!
CAUTION:
Use a Power Cycle only with the approval of your System Administrator and only when a reset does not resolve the problem. Power cycling might cause stored information such as options and settings to be lost.
Resetting Your Phone
This basic reset procedure can resolve most problems.
1. Press the Mute button.
2. Using the dial pad, press the following keys in sequence: 7 3 7 3 8 #
The display shows the message “Reset values? * = no # = yes.”
3. Choose one of the following:
If you want to
Reset the phone without resetting any assigned values
Reset the phone and any previously assigned
(programmed) values
(Use this option only if your phone has programmed, static values)
Then
Press * (asterisk).
A confirmation tone sounds and the display
prompts “Restart phone? * = no # = yes.”
Press # (the pound key).
The display shows the message “Resetting values.” Your IP Telephone resets its programmed values, such as the IP address, to their default values, and re-establishes the server connection. The display then prompts
“Restart phone? * = no # = yes.”
Note:
4. Press # to restart the phone or * to terminate the restart and restore the phone to its previous state.
Note:
Any reset/restart of your phone might take a few minutes.
82 4622SW IP Telephone User Guide
Resetting and Power Cycling the IP Telephone
Power Cycling the Phone
Use the power cycle with your System Administrator’s approval. Use power cycling only if the basic or programmed reset procedure cannot be performed or does not correct the problem:
1. Unplug the phone and plug it back in.
The phone connection is re-established.
2. If power-cycling does not correct the problem, your System Administrator can perform a more severe power cycle by unplugging both the phone and the Ethernet cables.
WARNING:
!
WARNING:
Because the type of power cycle mentioned in Step 2 involves reprogramming certain values, Step 2 should only be performed by your System Administrator.
Issue 3 April 2006 83
Telephone Management and Troubleshooting
84 4622SW IP Telephone User Guide
Index
Index
Numerical
4600 Series IP Telephones
Headsets for
. . . . . . . . . . . . . . . . . .
4622SW Applications, Troubleshooting
. . . . . . .
4622SW IP Telephone
. . . . . . . . . . . . . . . .
Additional Functionality
. . . . . . . . . . . . .
illustration of
. . . . . . . . . . . . . . . . . .
Logging Off
. . . . . . . . . . . . . . . . . . .
Reinstating after log off
. . . . . . . . . . . . .
Resetting and Power Cycling
. . . . . . . . . .
Telephone Applications
. . . . . . . . . . . . .
Telephone Button/Feature Descriptions
. . . . .
Telephone Options
. . . . . . . . . . . . . .
,
Telephone, Using Your
. . . . . . . . . . . . .
Troubleshooting
. . . . . . . . . . . . . . . .
A
About the Call Log
. . . . . . . . . . . . . . . . .
Accessing the Options Main Menus
. . . . . . . . .
Adding a Call Log Entry to a Speed Dial Button
. . .
Adding a held call to the current call, during
Conference
. . . . . . . . . . . . . . . . . . .
Adding a Speed Dial Button
. . . . . . . . . . . .
Adding a Speed Dial Button for a Web Site Telephone
Number
. . . . . . . . . . . . . . . . . . . . .
Alternate Language, Selecting an
Application Options
. . . . . . . . . .
. . . . . . . . . . . . . . . .
Application Screens, Navigating
Authentication, for Web Access
. . . . . . . . . .
. . . . . . . . . . .
Automatic Backup Option, Setting the
Automatic Backup/Retrieval Feature
. . . . . . . .
. . . . . . . .
Automatic Dialing
. . . . . . . . . . . . . . . . .
B
Backup File, Retrieving and Restoring Data from
. . .
Backup/Restore Options
. . . . . . . . . . . . . .
Backup/Restore, Settings Saved During
. . . . . . .
Backup/Retrieval Status
. . . . . . . . . . . . . .
Basic Troubleshooting Chart
. . . . . . . . . . . .
C
Call Appearance Width, Setting the
. . . . . . . . .
Call Appearances
. . . . . . . . . . . . . . . . .
Call Handling Features
. . . . . . . . . . . . . . .
Call Log
About the
. . . . . . . . . . . . . . . . . . . .
Calling a Party from the
. . . . . . . . . . . . .
Deleting a Single Entry
Deleting All Entries
. . . . . . . . . . . . .
. . . . . . . . . . . . . . .
Disabling the
. . . . . . . . . . . . . . . . . .
Enabling/Disabling the
. . . . . . . . . . . . . .
Troubleshooting
. . . . . . . . . . . . . . . . .
Viewing a
. . . . . . . . . . . . . . . . . . . .
Call Log Application
. . . . . . . . . . . . . . . .
Call Log Application, Using the
. . . . . . . . . . .
Call Log Entries
Deleting
. . . . . . . . . . . . . . . . . . . .
Deleting a Single Entry
. . . . . . . . . . . . .
Deleting all entries from a log
. . . . . . . . . .
Call Log Entry, Adding to a Speed Dial Button
. . . .
Calling a party from the Call Log
. . . . . . . . . . .
Calling a party from the Web Access application
Changing a Phone/PC Ethernet Interface
. . .
. . . . . .
Changing the Display Contrast
. . . . . . . . . . .
Conference
Adding a held call to the current call
. . . . . . .
Adding another party to a call
. . . . . . . . . .
Dropping the last person added to the call
Conference button
. . . .
. . . . . . . . . . . . . . . . .
Conference feature
. . . . . . . . . . . . . . . . .
D
Deleting a Speed Dial Button Label
. . . . . . . . .
Deleting Call Log Entries
. . . . . . . . . . . . . .
Dialing
Automatic
. . . . . . . . . . . . . . . . . . . .
Automatically, using an administered Line/Feature button
. . . . . . . . . . . . . . . . . . . . .
Calling a Party from the Call Log
. . . . . . . . .
Calling a Party from the Web Access application
.
Manual
. . . . . . . . . . . . . . . . . . . . .
Redialing
. . . . . . . . . . . . . . . . . . . .
using a Speed Dial button
. . . . . . . . . . . .
Dialpad, Entering Characters Using the
. . . . . . .
Disabling the Call Log
. . . . . . . . . . . . . . . .
Display Call Timers? Option, Setting the
. . . . . . .
Display Contrast, Changing the
. . . . . . . . . . .
Display description
. . . . . . . . . . . . . . . . .
Display Icons, Interpreting
. . . . . . . . . . . . . .
Documentation, Related
Drop button
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Dropping the last person added to the call, during
Conference
. . . . . . . . . . . . . . . . . . . .
Issue 3 April 2006 85
Index
E
Editing During or After Data Entry
. . . . . . . . . .
Enabling/Disabling the Call Log
. . . . . . . . . . .
Entering Characters Using the Dialpad
. . . . . .
,
Entering Data on Speed Dial Screens
. . . . . . . .
Entering Text on Web Pages
. . . . . . . . . . . .
Ethernet Interface, between phone and PC
. . . . .
EU24/EU24BL. See Feature Key Expansion Unit
. .
F
Feature and Telephone Button Descriptions
. . . . .
Feature Button Labeling
. . . . . . . . . . . . . .
Feature Key Expansion Unit
About the
. . . . . . . . . . . . . . . . . . .
Connection Jack
. . . . . . . . . . . . . . . .
File Transfer Protocol. See FTP
FTP Options
. . . . . . . . . . . . . . . . . . . .
H
Headset
Headset button
Headsets
. . . . . . . . . . . . . . . . .
Headset Jack
. . . . . . . . . . . . . . . . . .
Headset LED Indicator
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
Hold
Placing a call on
. . . . . . . . . . . . . . . .
Retrieving a held call
. . . . . . . . . . . . . .
Hold button
. . . . . . . . . . . . . . . . . . . .
Hold feature
. . . . . . . . . . . . . . . . . . . .
I
Icons/Background Colors for Features Administered on the 4622SW Call Server
. . . . . . . . . . . .
Interface Status, Viewing the
. . . . . . . . . . . .
Interpreting Display Icons
. . . . . . . . . . . . . .
Interpreting Ringer Tones
. . . . . . . . . . . . .
Introducing Your 4622SW IP Telephone
. . . . . . . .
IP Address Status, Viewing
. . . . . . . . . . . . .
L
Labeling Feature Buttons
. . . . . . . . . . . . . .
Language, Selecting an Alternate
Line/Feature buttons
. . . . . . . . . .
. . . . . . . . . . . . . . .
,
Log Off, Reinstating the Phone after a
. . . . . . . .
Logging Off the Phone
. . . . . . . . . . . . . . .
Logging Off the Telephone
. . . . . . . . . . . . .
Logoff, Reinstating the Phone following
. . . . . . .
M
Making Calls
. . . . . . . . . . . . . . . . . . . .
Manual Dialing
. . . . . . . . . . . . . . . . . . .
Message Display Rate, Setting the
. . . . . . . . .
Miscellaneous Status, Viewing
Mute button
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Mute feature
. . . . . . . . . . . . . . . . . . . .
Mute LED Indicator
. . . . . . . . . . . . . . . . .
N
Navigating
Application Screens
. . . . . . . . . . . . . . .
Web Pages
. . . . . . . . . . . . . . . . . . .
Navigating Web Pages
Home Page and Other Standard-Size Web Pages
.
Network Audio Quality, Viewing the
. . . . . . . . .
Numeric (Dialing) Pad
. . . . . . . . . . . . . . .
O
Options
Alternate Language
. . . . . . . . . . . . . . .
Automatic Backup
. . . . . . . . . . . . . . . .
Backup File retrieval/restore
. . . . . . . . . . .
Backup/Restore
. . . . . . . . . . . . . . . . .
Backup/Retrieval Status
. . . . . . . . . . . . .
Call Appearance Width
. . . . . . . . . . . . .
Call Log Enabling/Disabling
. . . . . . . . . . .
Call Timers
. . . . . . . . . . . . . . . . . . .
Display Contrast
. . . . . . . . . . . . . . . . .
for applications
. . . . . . . . . . . . . . . . .
FTP
. . . . . . . . . . . . . . . . . . . . . .
Interface Status
. . . . . . . . . . . . . . . . .
Labeling Feature Buttons
. . . . . . . . . . . .
Message Display Rate
. . . . . . . . . . . . . .
Miscellaneous Status
. . . . . . . . . . . . . .
Network Audio Quality
. . . . . . . . . . . . . .
Password, setting
. . . . . . . . . . . . . . . .
Personal Ringing
. . . . . . . . . . . . . . . .
Phone Screen on Answer?
. . . . . . . . . . . .
Phone Screen on Calling
. . . . . . . . . . . . .
Quality of Service (QoS) Status
. . . . . . . . .
Redial
. . . . . . . . . . . . . . . . . . . . .
Status Screen Viewing
. . . . . . . . . . . . . .
User ID, setting
. . . . . . . . . . . . . . . . .
Viewing IP Address Status
. . . . . . . . . . . .
Visual Alerting
. . . . . . . . . . . . . . . . . .
Options button
. . . . . . . . . . . . . . . . . . .
Options Main Menus, Accessing the
Options Screens, Troubleshooting
. . . . . . . . .
. . . . . . . . . .
Options, for 4622SW IP Telephone
. . . . . . . . .
86 4622SW IP Telephone User Guide
P
Page Left/Right buttons
. . . . . . . . . . . . . .
Paging indicator
. . . . . . . . . . . . . . . . . .
Password
. . . . . . . . . . . . . . . . . . . . .
PC Ethernet/Phone Interface, Changing
Personal Ringing Options
. . . . . . .
. . . . . . . . . . . . .
Phone Application
. . . . . . . . . . . . . . . . .
Phone Application, Troubleshooting the
. . . . . . .
Phone Feature buttons
. . . . . . . . . . . . . . .
Phone Screen on Answer? Option
. . . . . . . . .
Phone Screen on Calling? Option
. . . . . . . . . .
Phone/Exit button
. . . . . . . . . . . . . . . . .
Phone/PC Ethernet Interface, Changing
. . . . . . .
Placing a call on hold
. . . . . . . . . . . . . . . .
Power Cycling the Phone
. . . . . . . . . . . . . .
Push Feature
. . . . . . . . . . . . . . . . . . .
Q
Quality of Service (QoS) Status, Viewing
. . . . . .
R
Receiving Calls
. . . . . . . . . . . . . . . . . .
Redial button
. . . . . . . . . . . . . . . . . . .
Redial Option, Setting the
. . . . . . . . . . . . .
Redialing a party
. . . . . . . . . . . . . . . . . .
Redialing the last number called
. . . . . . . . . .
Redialing using a list of the last six numbers called
. .
Reinstating the Phone After a Log Off
Related Documentation
. . . . . . .
,
. . . . . . . . . . . . . . .
Resetting and Power Cycling the Telephone
. . . . .
Resetting Your Phone
. . . . . . . . . . . . . . .
Restoring Data from a Backup File
. . . . . . . . .
Retrieval Status
. . . . . . . . . . . . . . . . . .
Retrieving a held call
. . . . . . . . . . . . . . . .
Retrieving a Voice Mail Message
. . . . . . . . . .
Retrieving and Restoring Data from a Backup File
. .
Ringer Tones, Interpreting
. . . . . . . . . . . . .
S
Sending a call to another telephone
. . . . . . . . .
Setting a User ID, Password, and other FTP Options
.
Setting the Automatic Backup Option
. . . . . . . .
Setting the Call Appearance Width
. . . . . . . . .
Setting the Display Call Timers? Option
. . . . . . .
Setting the Message Display Rate
. . . . . . . . .
Setting the Phone Screen on Answer? Option
. . . .
Setting the Phone Screen on Calling? Option
. . . .
Index
Setting the Redial Option
. . . . . . . . . . . . . .
Setting Visual Alerting
. . . . . . . . . . . . . . .
Softkeys
. . . . . . . . . . . . . . . . . . . .
,
Speaker
Changing from the headset to the Speaker
. . . .
Changing from the Speaker to the headset
Ending a call while active
. . . .
. . . . . . . . . . . .
Turning off during a call
Turning on during a call
. . . . . . . . . . . . .
. . . . . . . . . . . . .
Speaker button
Speaker feature
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
Speaker LED Indicator
. . . . . . . . . . . . . . .
Speed Dial Application
. . . . . . . . . . . . . . .
Troubleshooting
. . . . . . . . . . . . . . . . .
Using the
. . . . . . . . . . . . . . . . . . . .
Speed Dial Button
Adding a
. . . . . . . . . . . . . . . . . . . .
Adding a Call Log Entry to a
. . . . . . . . . . .
Adding for a Web Site Telephone Number
. . . .
Deleting a Label
. . . . . . . . . . . . . . . . .
Dialing a party using a
. . . . . . . . . . . . . .
Updating Label Information
. . . . . . . . . . .
Speed Dial Screens
Editing During or After Entry
. . . . . . . . . . .
Entering Characters Using the Dialpad
. . . . . .
Entering Data on
. . . . . . . . . . . . . . . .
Status Screen Viewing Options
. . . . . . . . . . .
T
Telephone Button/Feature Descriptions
. . . . . . .
Telephone Lights and Display, Testing the
. . . . . .
Telephone Management and Troubleshooting
. . . .
Testing Your Phone
. . . . . . . . . . . . . . . .
Text, entering
. . . . . . . . . . . . .
,
Transfer
Sending a call to another telephone
Transfer button
. . . . . . .
. . . . . . . . . . . . . . . . . . .
Transfer feature
. . . . . . . . . . . . . . . . . .
Troubleshooting 4622SW Applications
. . . . . . . .
Troubleshooting Chart, Basic
. . . . . . . . . . . .
Troubleshooting, and Telephone Management
. . . .
U
Updating Speed Dial Button Label Information
. . . .
User ID
. . . . . . . . . . . . . . . . . . . . . .
Using the Call Log Application
. . . . . . . . . . . .
Using the Speed Dial Application
. . . . . . . . . .
Using the Web Access Application
. . . . . . . . . .
Using Your 4622SW IP Telephone
. . . . . . . . . .
Issue 3 April 2006 87
Index
V
Verifying Backup/Retrieval Status
. . . . . . . . . .
Viewing a Call Log
. . . . . . . . . . . . . . . . .
Viewing the Network Audio Quality
. . . . . . . . .
Visual Alerting, Setting
. . . . . . . . . . . . . . .
Voice Mail Message, Retrieving a
. . . . . . . . . .
Voice Message Light
. . . . . . . . . . . . . . . .
Volume Control buttons
. . . . . . . . . . . . . .
W
Web Access Application
. . . . . . . . . . . . . .
Calling a Party from the
. . . . . . . . . . . . .
Troubleshooting
. . . . . . . . . . . . . . . .
Using the
. . . . . . . . . . . . . . . . . . . .
Web Access Authentication
. . . . . . . . . . . . .
Web Pages
Entering Characters Using the Dialpad
. . . . . .
Entering Text on
. . . . . . . . . . . . . . . .
Navigating
. . . . . . . . . . . . . . . . . . .
Web Site Telephone Number, Adding a Speed Dial
Button for
. . . . . . . . . . . . . . . . . . . .
88 4622SW IP Telephone User Guide
advertisement
Key Features
- Large display with 12 application-specific buttons
- 12 Line/Feature buttons for calls and features
- 4 softkeys for navigating and actions
- Speed dial for quick calling
- Call log for recent calls
- WML browser for web access
- Options for customizing preferences
- Built-in one-way speaker
- Adjustable stand for optimal viewing
Frequently Answers and Questions
How do I make a call using the 4622SW IP Telephone?
What are the call appearance buttons used for?
How do I access different applications on the 4622SW IP Telephone?
How do I change the call appearance width?
What are the Line/Feature buttons used for?
Related manuals
advertisement
Table of contents
- 1 4622SW IP Telephone User Guide
- 3 Contents
- 7 About This Guide
- 7 Overview
- 7 Intended Audience
- 7 Issue Date
- 7 What’s New in This Document
- 8 How to Use This Document
- 8 Document Organization
- 9 Conventions Used
- 9 Symbolic Conventions
- 9 Typographic Conventions
- 9 Related Documentation
- 11 Chapter 1: Introducing Your 4622SW IP Telephone
- 11 Introduction
- 11 The 4622SW IP Telephone
- 15 About the Feature Key Expansion Unit (EU24BL)
- 15 Navigating Application Screens
- 17 4622SW IP Telephone Applications
- 17 Phone Application
- 17 Speed Dial Application
- 18 Call Log Application
- 18 Web Access Application (Optional)
- 18 4622SW Telephone Options
- 19 Additional 4622SW Functionality
- 19 Push Feature
- 19 Automatic Backup/Retrieval Feature
- 21 Chapter 2: Using Your 4622SW IP Telephone
- 21 Introduction
- 21 Call Appearances
- 21 Making Calls
- 22 Manual Dialing
- 22 Automatic Dialing
- 23 Redialing a party
- 24 Dialing a party using a Speed Dial button
- 25 Automatically dialing a party using an administered Line/Feature button
- 25 Calling a party from the Call Log
- 26 Calling a party from the Web Access application
- 26 Receiving Calls
- 27 Call Handling Features
- 27 Conference
- 28 Hold
- 28 Mute
- 28 Speaker
- 29 Changing from the Speaker to the headset
- 29 Changing from the headset to the Speaker
- 29 Turning the Speaker on during a call
- 29 Turning the Speaker off during a call
- 29 Ending a call while the Speaker is active
- 30 Transfer
- 30 Retrieving a Voice Mail Message
- 31 Logging Off the Phone
- 31 Reinstating the Phone After a Logoff
- 31 Forcing a Login to the Phone
- 33 Chapter 3: Using the Speed Dial Application
- 33 Introduction
- 33 Entering Data on Speed Dial Screens
- 33 Entering Characters Using the Dialpad
- 34 Editing During or After Entry
- 35 Name Entry Example
- 36 Adding a Speed Dial Button
- 37 Updating Speed Dial Button Label Information
- 38 Deleting a Speed Dial Button Label
- 39 Chapter 4: Using the Call Log Application
- 39 Introduction
- 39 About the Call Log
- 40 Viewing a Call Log
- 41 Adding a Call Log Entry to a Speed Dial Button
- 42 Deleting Call Log Entries
- 42 Deleting a Single Call Log Entry
- 43 Deleting All Entries from a Call Log
- 43 Disabling the Call Log
- 45 Chapter 5: Using the Web Access Application
- 45 Introduction
- 46 Web Access Authentication
- 46 Navigating Web Pages
- 47 Navigating the Home Page and Other Standard-Size Web Pages
- 48 Entering Text on Web Pages
- 49 Entering Characters Using the Dialpad
- 50 Adding a Speed Dial Button for a Web Site Telephone Number
- 51 Chapter 6: 4622SW IP Telephone Options
- 51 Introduction
- 52 Accessing the Options Main Menus
- 53 Application Options
- 53 Setting the Redial Option
- 54 Setting the Phone Screen on Answer? Option
- 54 Setting the Phone Screen on Calling? Option
- 55 Setting the Display Call Timers? Option
- 55 Setting the Message Display Rate
- 56 Setting the Call Appearance Width
- 56 Setting Visual Alerting
- 56 Enabling/Disabling the Call Log
- 57 Personal Ringing Options
- 58 Status Screen Viewing Options
- 58 Viewing IP Address Status
- 58 Viewing Quality of Service (QoS) Status
- 59 Viewing Interface Status
- 59 Viewing Miscellaneous Status
- 59 Changing the Display Contrast
- 60 Viewing the Network Audio Quality
- 60 Logging Off the 4622SW IP Telephone
- 61 Reinstating the Phone After a Log Off
- 61 Backup/Restore Options
- 62 Settings Saved During a Backup
- 63 Setting the Automatic Backup Option
- 64 Verifying Backup/Retrieval Status
- 65 Retrieving and Restoring Data from a Backup File
- 66 Setting a User ID, Password, and other FTP (File Transfer Protocol) Options
- 68 Feature Button Labeling
- 70 Changing a Phone/PC Ethernet Interface
- 71 Selecting an Alternate Language
- 73 Chapter 7: Headsets
- 73 Introduction
- 73 Headsets for 4600 Series IP Telephones
- 75 Chapter 8: Telephone Management and Troubleshooting
- 75 Introduction
- 75 Interpreting Ringer Tones
- 77 Interpreting Display Icons
- 77 Testing Your Phone
- 77 Testing the Telephone's Lights and Display
- 78 Basic Troubleshooting Chart
- 80 Troubleshooting 4622SW Applications
- 82 Resetting and Power Cycling the IP Telephone
- 82 Resetting Your Phone
- 83 Power Cycling the Phone
- 85 Index
- 85 Numerical
- 85 A
- 85 B
- 85 C
- 85 D
- 86 E
- 86 F
- 86 H
- 86 I
- 86 L
- 86 M
- 86 N
- 86 O
- 87 P
- 87 Q
- 87 R
- 87 S
- 87 T
- 87 U
- 88 V
- 88 W