Billion BiPAC 7402G Quick Start Guide

Add to My manuals
7 Pages

advertisement

Billion BiPAC 7402G Quick Start Guide | Manualzz

BIPAC 7402G

802.11g ADSL VPN Firewall Router

Quick Start Guide

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

For more detailed instructions on configuring and using the 802.11g ADSL VPN Firewall Router, please refer to the on-line manual.

Package Contents

BIPAC 7402G 802.11g ADSL VPN Firewall Router

CD-ROM containing the on-line manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

Console (PS2-RS232) Cable

AC-DC power adapter (12VDC, 1A)

External Antenna

This Quick Start Guide

Warning

Attention

9 DO NOT use the BIPAC 7402G in high humidity or high temperatures.

9 DO NOT use the same power source for the BIPAC 7402G as other equipment.

9 DO NOT open or repair the case yourself. If the BIPAC

7402G is too hot, turn off the power immediately and have it repaired at a qualified service center.

9 Avoid using this product and all accessories outdoors.

9 Place the BIPAC 7402G on a stable surface.

9 Only use the power adapter that comes with the package.

Using a different voltage rating power adaptor may damage the router.

1 2

Quick Start Guide

The Front LEDs

LAN

PWR SYS WLAN 1 2 3 4 ADSL PPP/MAIL

LED

PPP / MAIL

ADSL

Meaning

Lit steady when there is a PPPoA / PPPoE connection.

Lit and flashed periodically when there is email in the Inbox.

When lit, it indicates that the ADSL (Line) port is connected to the DSLAM and working properly.

LAN Port

1X — 4X

(RJ-45 connector)

Lit when the LAN link is connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

WLAN

Lit green when the wireless connection is established.

Flashes when sending/receiving data.

SYS Lit when the system is ready.

PWR Lit when power is ON.

The Rear Ports

6

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

4 3 1

1

2

5 2

Port Meaning

Power Switch

Power ON/OFF switch

PWR

Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used when you can not login to the router, e.g. forgot the password)

4

LAN

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

(RJ-45 connector) network of 10Mbps or 100Mbps.

5

CONSOLE

Connect a PS2/RS-232 cable to this port when connecting to a

PC’s RS-232 port (9-pin serial port).

6

LINE Connect the supplied RJ-11 (“telephone”) cable to this port when connecting to the ADSL/telephone network.

Quick Start Guide

Connecting Your ADSL Router

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR, SYS, and WLAN LEDs are lit steadily and that the relevant LAN LED is lit.

LAN

PWR SYS WLAN 1 2 3 4

ADSL PPP/MAIL

3 4

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status window, click Properties.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

5

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

6

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and choose the Protocols tab.

2. Select TCP/IP Protocol and click Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and click

OK to finish the configuration.

7 8

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Configuring Your ADSL VPN Firewall Router

To configure this device, you must have IE 5.0 /

Netscape 4.5 or above installed

Connecting to the Router

1. Open the web browser and type http://192.168.1.254

in the browser’s address box. This number is the default IP address for this router. Press Enter.

2. A user name and password window will appear. The default User Name and

Password are “admin” and” admin”.

Press OK to logon to the router.

9

Quick Start Guide

Verifying Your Local Network Connection with the Device

To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK.

A command prompt window will pop out. If your ping is successful which means your local network is able to reach to the device, then the command prompt window will close up automatically.

Connection fails, when you see

Request timed out” in the command prompt window. You may need to check your set up.

10

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Product Support and Contact Information

Most problems can be solved by referring to the Troubleshooting section in the User’s

Manual. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product.

Contact Billion

WORLDWIDE http://www.billion.com

Mac OS is a registered Trademark of Apple Computer, Inc.

Windows 98, Windows NT, Windows 2000, Windows Me and Windows XP are registered Trademarks of Microsoft

Corporation.

11

advertisement

Key Features

  • 802.11g wireless networking for fast and reliable wireless connections
  • ADSL modem for high-speed Internet access
  • Firewall to protect your network from unauthorized access
  • Four LAN ports for connecting multiple devices
  • Console port for connecting to a PC for configuration and management
  • Reset button to restore the router to its factory default settings

Related manuals

Frequently Answers and Questions

How do I connect the BiPAC 7402G to my DSL line?
Connect the supplied RJ-11 (“telephone”) cable to the LINE port on the router and to the DSL jack on your wall.
How do I configure the BiPAC 7402G?
Open a web browser and type http://192.168.1.254 in the address bar. Enter the default username and password (admin/admin) and click OK to log in to the router's web interface.
How do I reset the BiPAC 7402G to its factory default settings?
Press and hold the RESET button on the back of the router for 6 seconds.
Download PDF

advertisement