Grande Series Decorative, 6 and 12V FEATURES

Grande Series Decorative, 6 and 12V FEATURES
Project/Location:
Contractor:
Date:
Grande™ Series
Prepared by:
Decorative, 6 and 12V
FEATURES
•Designed with aesthetics, ease of installation and performance in mind
•Simple, compact and contemporary design
•Wall-mount or ceiling-mount installation
•Two-piece housing of injection-molded thermoplastic
•Two MR16 halogen lamps, shielded by clear polycarbonate covers
•Available with long lasting MR16 LED lamps
•Sealed, maintenance-free, Lead-Calcium
•Dual voltage input: 120/347VAC.
•Up to 150W of total battery capacity
•Auto-test (optional)
•NEXUS® interface (optional)
•Listed CSA 22.2 No.141
Lumacell Model:
TYPICAL SPECIFICATIONS
Supply and install the Lumacell® Grande™ Series battery unit equipment.
The unit construction shall include a housing and a front cover, high-impact
thermoplastic moulded in white. No screws shall be necessary to hold the front
cover to the housing. The unit shall be equipped with two emergency heads
with adjustable swivels and MR-16 lamps of
V
W protected
by snap-on shock-absorbent, clear polycarbonate covers. The unit shall be
suitable for wall mount or as otherwise specified.
The unit equipment shall have a dual-voltage input of 120/347VAC and shall
be equipped with a test switch and a green pilot light, located on the left side.
The housing shall host the battery and the battery charger. The battery charger
and other unit functions shall be driven by a micro-controller. All electronic
circuitry shall be installed on a single printed circuit board.
When specified, the unit equipped with Auto-test shall automatically self-test
for one minute every 30 days, 10 minutes in the 6th month and 30 minutes
annually. When a fault is detected, the bi-color pilot light shall turn from green
to red and start flashing. A legend on a label next to the pilot light shall display
the source of failure: battery, charger circuitry or lamp load.
The unit equipment shall be listed to the standard CSA 22.2 No.141.
The unit equipment shall be Lumacell® model:
.
WIRE GUARDS
460.0114-L
Wall Mount or flat ceiling mount
REPLACEMENT LAMPS
ORDERING CODE
TYPE
580.0079-L
MR16 halogen
VOLTAGE/ WATTAGE
6V-10W
580.0080-L
MR16 halogen
12V-12W
580.0064-L
MR16 halogen
12V-20W
580.0093-L
MR16 LED
12V-4W
580.0097-L
MR16 LED
6V-4W
580.0104-L
MR16 LED
12V-5W
580.0106-L
MR16 LED
12V-6W
IN THE SAME FAMILY:
- Grande™ Series Thermoplastic
Exit Sign
p. 52
108
www.lumacell.com
- Grande™ Series
Thermoplastic Combination
Unit
p. 53
Grande™ Serie
Decorative, 6 and 12V
DIMENSIONS
Dimensions are approximate and subject to change.
105/8” [26.9 cm]
121/4” [31 cm]
37/8” [9.8 cm]
FLAT CEILING MOUNT
ORDERING INFORMATION
SERIES
GRA= 6V
CAPACITY
40= 40W
72= 72W
GR12A= 12V 80= 80W
120= 120W
150= 150W
HEADS
0= no head
2= two heads
LAMPS TYPE AND
WATTAGE
LD1= 6V-4W, MR16 LED
LD7= 12V-4W, MR16 LED
LD9= 12V-5W, MR16 LED
LD10= 12V-6W, MR16 LED
M6= 6V-6W MR16
M10= 6V, 12V-10W MR16
M12= 12V-12W MR16
M20= 12V-20W MR16
COLOUR
W= factory
white
B= black
VOLTAGE
Blank= 120/347VAC
ZC= 120/277VAC
UNIT TYPE
Blank= standard
AT= auto-test*
ATN= auto-test (nonaudible)*
EXUS® system
NEX= N
interface**
NEXRF= wireless NEXUS®
system interface**
OPTIONS
Blank= no options
CM= ceiling mount
3= time delay (15 minutes)
LC= line cord (120V only)
PM= pendant mount
(sold seperately)
* Minimum lamp load required:
20% of unit capacity.
** Not all options available
with the NEXUS® system.
Please consult your sales
representative.
EXAMPLE: GRA402M6W
www.lumacell.com
109
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement