Quick Reference Guide (Download PDF, 2.67M)

Quick Reference Guide (Download PDF, 2.67M)
2016 Infiniti QX60
Quick Reference Guide
2
1
3
Behind
steering
wheel
4
5
21
Behind
steering
wheel
6
7
8
22
9
15
Behind
steering
wheel
10
14
23
24
25
11
16
12
17
13
26
18 19
27
20
1 INSTRUMENT BRIGHTNESS
CONTROL SWITCHES*
15 TILT/TELESCOPIC STEERING
WHEEL SWITCH*
2 BACKUP COLLISION INTERVENTION
(BCI) SWITCH
16 HEATED STEERING WHEEL SWITCH*
3 TWIN TRIP ODOMETER RESET SWITCH*
17 WARNING SYSTEMS SWITCH
4 VEHICLE INFORMATION DISPLAY
18 HEADLIGHT AIMING
CONTROL SWITCH*
5 HEADLIGHT AND TURN SIGNAL SWITCH
19 POWER INVERTER SWITCH
6 LOW TIRE PRESSURE WARNING LIGHT
20 HOOD RELEASE*
7 WIPER AND WASHER SWITCH
21 CONTROL PANEL DISPLAY SCREEN*
8 VEHICLE INFORMATION
DISPLAY SWITCH
22 HEATER AND AIR CONDITIONER (automatic)
9 STEERING WHEEL SWITCHES FOR
AUDIO*/BLUETOOTH®/NAVIGATION
10 INTELLIGENT CRUISE CONTROL
11 VEHICLE DYNAMIC CONTROL
(VDC) OFF SWITCH*
12 POWER LIFTGATE SWITCH
13 POWER LIFTGATE MAIN SWITCH
14 DISTANCE CONTROL ASSIST
(DCA) SYSTEM SWITCH*
*See your Owner’s Manual for information.
23 AUDIO SYSTEM
24 FRONT PASSENGER AIR BAG
STATUS LIGHT*
25 POWER OUTLET
26 DRIVER’S CLIMATE-CONTROLLED
SEAT SWITCH*
27 INFINITI DRIVE MODE SELECTOR*
28 PASSENGER’S CLIMATE-CONTROLLED
SEAT SWITCH*
28
table of contents
28
new system features
Warning Systems Switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
essential information
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator . . . . 3
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Fuel-filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Towing Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Accessing the Front Cup Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front Armrest/Center Console Storage Box . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Clock Set/Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
first drive features
Around View® Monitor (AVM) with Moving Object Detection (MOD)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Infiniti Connection™ (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Infiniti Intelligent Key System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Power Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Power Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2nd Row Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3rd Row Manual Reclining Seatback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3rd Row Power Folding Seats (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 13
Automatic Drive Positioner (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 14
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Starting/Stopping the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Wiper and Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Heater and Air Conditioner (automatic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rear Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FM/AM/SiriusXM® Satellite Radio with CD/DVD Player (if so equipped) . 19
USB (Universal Serial Bus) Connection Port/iPod® Interface . . . . . . . . . . 20
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . 20
Intelligent Cruise Control (ICC) (if so equipped) . . . . . . . . . . . . . . . . . . . . 21
Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
INFINITI Mobile Entertainment System (MES) (if so equipped) . . . . . . . . 23
system guide
Vehicle Information Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Bluetooth® System without Navigation (if so equipped) . . . . . . . . . . . . . . 26
Bluetooth® System with Navigation (if so equipped) . . . . . . . . . . . . . . . . . 27
Bluetooth® Streaming Audio with Navigation (if so equipped) . . . . . . . . . 30
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
HomeLink® Universal Transceiver (if so equipped) . . . . . . . . . . . . . . . . . . 33
Please see your Owner’s Manual for important safety information
and system operation limitations.
• A cellular telephone should not be used for any purpose while
driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat
properly secured in child restraints or seat belts according to
their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety — Seats, seat belts and
supplemental restraint system (section 1)”, the “Monitor, climate,
audio, phone and voice recognition systems (section 4)” and the
“Starting and driving (section 5)” of your Owner’s Manual.
To view detailed
instructional videos, go to
www.infinitiownersinfo.mobi/2016/qx60
or snap this barcode
Additional information about your vehicle is also available in your Owner’s
with an appropriate barcode reader.
Manual, Navigation System Owner’s Manual and at www.InfinitiUSA.com.
ne w s y s t e m f e a t u r e s
Warning Systems Switch (if so equipped)
T he warning systems switch 1 will turn on and off
the systems enabled in the vehicle information
display. The systems controlled by the warning
systems switch 1 include:
• Lane Departure Warning (LDW)
• Blind Spot Warning (BSW)
• Forward Collision Warning (FCW)
W
hen the warning systems switch 1 is turned off,
the indicator 2 on the switch is off. If the
warning systems switch 1 is illuminated, the
enabled systems are on. The indicator 2 will also
be off if all of the warning systems are deactivated
using the “Settings” menu.
1
2
3
4
To enable or disable these systems, perform the
following operation:
•P
ress the
button 3 on the steering wheel
multiple times until you reach the “Settings” menu.
• Press up or down on the button 4 on the
steering wheel to select the “Driver Assistance”
5 and “Driving Aids” 6 menu items.
• Press the ENTER button 4 on the steering wheel to
change a menu item.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
2
5
6
e s s e n t i a l inf or mat ion
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A Tire Pressure Low – Add Air warning message
will appear in the vehicle information display 1
and the low tire pressure warning light 2 will
illuminate when one or more tires are low in
pressure and air is needed.
1
• The tire pressures should be checked when
the tires are cold. The tires are considered cold
after the vehicle has been parked for 3 hours or
more or driven less than 1 mi (1.6 km) at
moderate speeds.
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and
audible signals to help you inflate the tire to the
recommended COLD tire pressure.
2
To use the Tire Inflation Indicator:
1. Move the shift lever to the P (PARK) position and apply the parking brake.
2. Place the ignition switch in the ON position. Do not start the engine.
3. Add air to the under-inflated tire, and within a few seconds, the hazard warning lights will
start flashing.
4. When the designated tire pressure is reached, the horn will beep once and the hazard
warning flashers will stop flashing.
5. Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at speeds above 16 mph (25 km/h).
The Tire Pressure Low – Add Air warning message and low tire pressure warning light 2
will extinguish.
When the low tire pressure warning light 2 flashes for approximately 1 minute and
then remains on, the TPMS is not functioning properly. Have the system checked. It is
recommended you visit an Infiniti retailer for this service.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and
the outside temperature. Low outside temperature can lower the temperature of the air
inside the tire, which can cause a lower tire inflation pressure. This may cause the low tire
pressure warning light 2 to illuminate. If the warning light illuminates, check the tire
pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long
distance trips.
The Tire and Loading Information label contains valuable information. Refer to the
“Technical and consumer information (section 9)” of your Owner’s Manual for the location
of the Tire and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
3
ess ent i al i n f o r m a t i o n
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear in
the vehicle information display 1 when the
fuel-filler cap is not tightened correctly.
1
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will extinguish when the vehicle
detects the fuel-filler cap is properly tightened and the reset
button 2 is pressed for about 1 second.
If the cap is not properly tightened, the Malfunction
Indicator Light
may illuminate.
2
For more information, refer to the “Instruments and controls (section 2)”
and the “Pre-driving checks and adjustments (section 3)” of your
Owner’s Manual.
Fuel-filler Door
The fuel-filler door is located on the driver’s side of
the vehicle.
The fuel-filler door automatically locks or unlocks
when the driver’s door is locked or unlocked.
To open the fuel-filler door, push the right side of the
fuel-filler door and release.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Towing Your Vehicle
All-Wheel Drive (AWD) vehicle
•An all-wheel drive vehicle must be towed with all wheels off the ground even if the
vehicle is placed in the Front Wheel Drive (FWD) mode.
For proper towing and to avoid accidental damage to your vehicle, INFINITI
recommends that a service operator tow your vehicle after carefully reading the Owner’s
Manual precautions.
For more information, refer to the “In case of emergency (section 6)” of your Owner’s Manual.
Accessing the Front Cup Holders
To open the cup holders, push the lid 1
down and release.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
4
1
Front Armrest/Center Console Storage Box
To access the top storage bin, pull up on the driver’s
side UPPER lever 1 .
To access the bottom storage bin, pull up on the
passenger’s side LOWER lever 2 .
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
2
1
Clock Set/Adjustment
DIGITAL CLOCK ADJUSTMENT
To adjust the time and the appearance of the clock
on the display:
1.Press the SETTING button on the control panel.
2.Touch the “Others” key.
3.Touch the “Clock” key.
The following settings can be adjusted:
•O
n-screen Clock: The clock in the upper right corner of the display can be turned on or off.
• Clock Format (24h): The clock can be set to 12 hours or 24 hours.
• Offset (hour): The time can be adjusted by increasing or decreasing per hour.
• Offset (min): The time can be adjusted by increasing or decreasing per minute.
• Daylight Savings Time: The application of Daylight Savings Time can be turned on or off.
• Time Zone: Adjust the time zone. Choose a time zone from the available list.
Press the
BACK button to return to the previous screen.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
5
fi rs t dr i v e f e a t u r e s
Around View® Monitor (AVM) with Moving Object Detection (MOD)
(if so equipped)
With the ignition switch in the ON position, the
Around View® Monitor is activated by pressing the
CAMERA button 1 , located on the control panel,
or by moving the shift lever to the R (REVERSE)
position. The control panel displays various views
of the position of the vehicle.
1
When the shift lever is in the P (PARK), N (NEUTRAL) or D (DRIVE) position and the CAMERA
button 1 is pressed, the following views will display in order:
Start from any Control Panel screen
Front view & bird’s-eye view
Press
Press
Press
Front view & front-side view
Front-wide view
Press
When the shift lever is in the R (REVERSE) position and the CAMERA button 1 is pressed,
the following views will display in order:
Rear view & bird’s-eye view
Rear view & front-side view
Press
Rear-wide view
Press
6
Press
The colored guide lines on the display screen indicate
vehicle width and approximate distances to objects
with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m)
and 10 ft (3 m).
2
There are some areas where the system will not
show objects.
• When in the front or the rear view display, an object
below the bumper or on the ground may
not be viewed 2 .
• When in the bird’s-eye view, a tall object near
the seam of the camera viewing areas 3 will not
appear in the monitor.
3
The distance between objects viewed on the Around View Monitor differs from
the actual distance.
Objects in the bird’s-eye view will appear further than the actual distance.
MOVING OBJECT DETECTION (MOD)
I f the MOD system detects moving objects
surrounding the vehicle, a yellow frame 1 will
be displayed on the camera image and a chime
will sound.
2
3
1
In the bird’s-eye view, a yellow frame is displayed
on those camera images (front, rear, right, left)
where moving objects are detected.
4
When the following are displayed:
• Blue MOD icon 2 ; the system is operative in this view.
• Gray MOD icon 3 ; the system is not operative in this view.
• No MOD icon; the system is off.
To temporarily turn the system on or off, touch the MOD key 4 .
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
7
fi rs t dr i v e f e a t u r e s
Infiniti Connection™* (if so equipped)
Infiniti Connection™ combines personalized convenience, concierge settings and personal
security features to compliment the Total Ownership Experience®. For more details on Infiniti
Connection or to enroll your vehicle, please visit www.InfinitiConnection.com or
call 855-444-7244.
To access Infiniti Connection™:
1
1. Press the INFO button 1 on the control panel.
2. Select the “Infiniti Connection” key 2 on the display.
Available services include:
Automatic Collision Notification – In case of air bag
deployment, a signal is sent containing the vehicle
location and customer information to notify the
proper authorities.
2
Emergency Call – This service provides emergency
assistance by connecting the subscriber to an Infiniti
Connection Specialist.
• In case of an emergency, press the in-vehicle
telematics SOS button 4 .
• A Response Specialist will provide assistance
based on the situation described by the
vehicle’s occupant.
3
Enhanced Roadside Assistance – Roadside
Assistance can be accessed by touching the “Infiniti
Connection” key 2 on the Info menu or the
key
3 on the map screen.
• This service allows subscribers to receive
assistance for a non-emergency incident, such as
towing, or a third party response.
4
My Schedule – Access your personal online Google Calendar™, hear details read via
text-to-speech** and select a location as a destination via the Navigation System.
Report Stolen Vehicle – A Response Specialist will attempt to obtain location
information from a reported stolen vehicle and provide that information to a local law
enforcement agency.
Remote Door Lock/Unlock – Remotely access your vehicle via an Infiniti Connection
Response Specialist or the designated website to remotely lock or unlock your vehicle.
Alarm Notification – This system will notify you when the factory-installed vehicle alarm
system has been activated.
*Infiniti Connection™ is only available on vehicles equipped with an optional Infiniti Connection subscription service.
**Laws in some communities may restrict the use of text-to-speech. Check local regulations before using this feature.
8
Scheduled Maintenance Notification – Receive scheduled maintenance notifications
based on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunction that triggers
instrument panel warning lights.
Destination Assistance – Receive point-of-interest assistance via a guided IVR (Interactive
Voice Response) or a Response Specialist by touching the
key 3 on the map screen or
the Infiniti Connection™ web portal.
Destination Send-to-Vehicle – Find and download point-of-interest information from
Google Maps™ mapping service.
Connected Search – Select “Connected Search” from the Destination menu on the
vehicle’s Navigation System to conduct a point-of-interest search within a certain distance
of the vehicle’s location.
Drive Zone – Monitor the movement of your vehicle within a specified region. Set up
boundaries in the Monitoring section of the Infiniti Connection™ web portal.
Max Speed Alert – Set a maximum speed on the Infiniti Connection™ web portal. You will
receive notifications if your vehicle exceeds the maximum speed setting.
Mobile Information Service – Receive the latest news headlines, stock quotes and sports
scores by setting up preferences on the Mobile Information Service page in the Infiniti
Connection™ web portal.
Valet Alert – Use to set up a 0.2-mile radius around your vehicle.
• Activate alerts by touching the “Connect to Voice Menu” key on the “Infiniti Connection”
screen or by touching the
key 3 on the map screen.
• At the prompt, say “Valet Alert” and then “Activate” or “Deactivate”.
Driving is serious business. Only use Infiniti Connection™ and Infiniti Connection Plus services when safe to do so. Services,
including automatic crash notification and SOS, require an active subscription, and are dependent upon the telematics device
being in an operative condition, its ability to connect to a wireless network, compatible wireless network availability, navigation
map data, and GPS satellite signal receptions, the absence of which can limit or prevent the ability to reach Infiniti Connection
Customer Care or receive support. Services require compatible 2G GSM/GPRS cellular network provided by AT&T. 2G cellular
network not available in all areas and/or available at all times. Cellular technology is evolving, and changes to cellular networks
provided by independent companies are not within Infiniti’s control. AT&T has announced that on December 31, 2016, AT&T
will terminate 2G network availability. AT&T has advised that, if purchased/leased vehicle prior to March 31, 2016, you must
enroll by March 31, 2016 to have the services on the 2G network through December 31, 2016. Like other devices that rely
on 2G network coverage, once the 2G network is terminated, Infiniti Connection and Infiniti Connection Plus services will not
function unless equipment replacements, upgrades, or alternative 2G network coverage are available at that time, which Infiniti
cannot guarantee. Infiniti is not responsible for associated costs that may be required for continued operation due to cellular
network termination (including equipment upgrades, if available, or roaming charges on alternative networks). Certain vehicle
services, including Google® compatible services, provided by independent companies are not within Infiniti’s control and
are subject to change without notice or liability to Infiniti and its affiliates and agents. Complimentary 12 month subscription
begins on your date of purchase. Subsequently, your credit card (if on file) will be charged at the then current subscription
rate and your service will continue for 1 year periods under the terms of your Subscription Agreement, or until 2G coverage is
terminated on December 31, 2016 (if equipment upgrades or roaming charges are not available by that date). Text rates and/
or data usage may apply.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
9
fi rs t dr i v e f e a t u r e s
Infiniti Intelligent Key System
The Infiniti Intelligent Key system allows you to lock or
unlock your vehicle, open your liftgate and remotely start
the engine. It is important to make sure the Intelligent Key
is with you (that is, in your pocket or purse).
1
LOCKING AND UNLOCKING YOUR VEHICLE
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request switch 1 once
or press the button 2 on the key fob.
To unlock the vehicle, perform one of the following procedures:
• Push either door handle request switch 1 once; the
corresponding door will unlock. Push the door handle request
switch 1 again within 1 minute; all other doors will unlock, or
• Press the button 3 on the key fob to unlock the driver’s side
door. Press the button 3 again; all other doors will unlock.
6
2
3
4
5
REMOTE ENGINE START* (if so equipped)
The remote engine start system must be enabled in the vehicle
settings within the vehicle information display.
The remote engine start operating range is approximately 200 ft (60 m) from the vehicle.
The effective operating range may be shorter due to environmental conditions or obstacles
between you and the vehicle.
For the remote engine start to function, the vehicle must be in the P (PARK) position with
the ignition off and all the doors closed and locked.
To start your vehicle remotely:
button 2 .
1. Press the
2.Within 5 seconds, press and hold the remote engine start
for at least 2 seconds.
button 6
The engine will start, and the parking lights will turn on.
Automatic climate control will begin heating or cooling the vehicle depending on the last
used mode.
The engine will run for 10 minutes and then turn off.
Repeat steps 1 and 2 to extend the time for an additional 10-minute period.
• After two remote starts, the ignition switch must be cycled before the remote start can be
used again.
To start driving, depress the brake pedal and press the ignition switch START/STOP button.
*Laws in some communities may restrict the use of remote starters. Check local regulations before using this feature.
10
LIFTGATE RELEASE
To open the rear liftgate, press the
button 4 for longer than 1 second.
To close the rear liftgate, press the
button 4 again for longer than 1 second.
PANIC ALARM
The Intelligent Key can also be used to activate the panic alarm by pressing and holding
the button 5 for longer than 1 second. Once activated, the panic alarm and headlights
will stay on for a period of time.
INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged or environmental conditions interfere
with the Intelligent Key operation, start the engine
according to the following procedure:
1. Move the shift lever to the P (PARK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key,
and a chime will sound.
4. Within 10 seconds after the chime sounds, push
the ignition switch while depressing the brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and
the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
Power Liftgate
• Pushing the power liftgate switch 1 on the
instrument panel.
• Pushing the liftgate opener switch 2 ; the
liftgate must be unlocked, or you must have the
Intelligent Key with you (that is, in your pocket
or purse).
• Pressing the
button 3 on the Infiniti
Intelligent Key for longer than 1 second.
The power liftgate operation can be turned on
or off by the power liftgate main switch 4 on
the instrument panel.
• When the power liftgate main switch 4 is
pushed to the OFF position, power operation is not
available using the liftgate close switch 5 on the
liftgate or the liftgate opener switch 2 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
4
1
When the liftgate is closed and locked, the liftgate
will open automatically by:
2
5
3
11
fi rs t dr i v e f e a t u r e s
Power Seat Adjustments
To slide the seat forward or backward, push the
switch 1 forward or backward.
To recline the seatback, push the
forward or backward.
switch 2
SEAT LIFTER
To raise or lower the front portion or height of the
seat, push the front or back end of the
switch 1 up or down.
2
1
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the
3
switch 3 .
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
2nd Row Seats
To slide the seat forward or backward, pull the
center of the bar 1 up and hold it while you slide
the seat forward or backward to the desired
position. Release the bar to lock the seat
in position.
To recline the seatback, pull up on the lever 2 and
lean back. To bring the seatback forward, pull the
lever up and lean your body forward. Release the
lever to lock the seatback in position.
3
1
2
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
This feature is not available on the driver’s side of the 2nd row seat.
If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd row
can be accessed without removing the child safety seat.
To access the 3rd row from outside the vehicle, lift up on the seatback release lever 3 .
EZ ENTRY MODE
To enter the 3rd row from outside the vehicle, lift fully up on the seatback release lever 3 .
This will release the back of the seat and fold up the seat cushion.
For access to the rear seat, slide the entire seat forward by pushing on the upper
seatback area.
To return the seat to a locked position, push the upper seatback rearward until the
seatback and track are locked. Push the seat cushion down. Locking the seatback will also
lock the track.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)”
of your Owner’s Manual.
12
3rd Row Manual Reclining Seatback
To recline the seatback, pull up on the latch 1
located on the outside corner of each seatback. Lean
back until the desired angle is obtained.
To bring the seatback forward again, pull up on the
latch 1 and move your body forward. The seatback
will move forward.
1
For more information, refer to the “Safety — Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
3rd Row Power Folding Seats (if so equipped)
The 3rd row seats can be folded flat for maximum
cargo hauling or extra storage space.
Before folding down the 3rd row seats:
1
• The vehicle’s shift lever must be in the P (PARK)
or N (NEUTRAL) position.
MANUAL SEAT FOLD DOWN (if so equipped)
To fold the 3rd row seats flat:
1. Pull the strap to release the head restraint
forward 1 .
2. Stow the 3rd row seat belts in the seat belt hooks
2 found in the cargo area.
2
3. Pull up on the latch located on the corner of each
seatback and lower the seatback forward over the
seat base 3 .
POWER UNFOLDING SEAT (if so equipped)
When the ignition switch is in the OFF position, the
power unfolding seats are always operational.
If the ignition switch is in the ON position, the
power unfolding seats are only operational
when the shift lever is in the P (PARK) or
N (NEUTRAL) position.
3
To return the 3rd row seats to the upright position:
1. Push and hold the switch. The seatback will rise
up while you are holding the switch.
A chime will sound once to indicate the start of the operation.
A warning chime will sound continuously if the seat is not in the fully upright or folded
position when the ignition switch is placed in the ON position.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
13
fi rs t dr i v e f e a t u r e s
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner 1 memory.
1
Follow this procedure to set the memory positions:
• Push the ignition switch to the ON or ACC position.
(The vehicle should be stopped while setting
the memory.)
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the
adjusting switches for each feature.
• Push the SET switch, and within 5 seconds push the memory switch (1 or 2).
• The indicator light for the memory switch you select will illuminate for approximately 5
seconds and a chime will sound when the memory is stored.
• T he driver’s seat, steering column and outside mirror positions are now set to
your preferences.
These memorized positions can also be linked to your Infiniti Intelligent Key.
To link a memorized position to your Infiniti Intelligent Key, press the unlock button on the
key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the control switch 1 right or left.
Adjust each mirror to the desired position using the control switch 2 .
To fold the outside rearview mirrors, push the control switch 3 to the
unfold the outside rearview mirrors, push the control switch 3 to the
position. To
position.
REVERSE TILT-DOWN FEATURE (if so equipped)
The reverse tilt-down feature will turn both outside
mirror surfaces downward to provide better rear
visibility close to the vehicle.
1. Apply the brake.
2. Push the ignition switch to the ON position.
3.Move the shift lever to the R (REVERSE) position.
4.The outside mirror surfaces will move downward.
(The mirror control switch 1 must be out of the
center [neutral] position.)
1
2
3
The outside mirror surfaces will return to their original positions when one of the following
conditions has occurred:
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch 1 is set to the center (neutral) position.
• The ignition switch is placed in the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
14
Starting/Stopping the Engine
It is important to make sure the Infiniti Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to
start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position 1 to turn on the front parking, tail, license
plate and instrument panel lights. Turn the switch to
the
position 2 to turn on the headlights.
3
1
2
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when
it is light. The system will keep the headlights on for a period of time after you turn the
ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 3
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 1 or
position 2 .
HIGH BEAM SELECT
With the headlights ON (either in the AUTO or
position), push the headlight control switch forward
to select the high beam function. The blue indicator
light
will illuminate in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light
will extinguish.
Pull and release the headlight control switch 5
to flash the headlight high beams on and off.
4
5
FOG LIGHT SWITCH
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
position 6
6
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
15
fi rs t dr i v e f e a t u r e s
LANE CHANGE SIGNAL
Move the lever up or down until the turn signal begins to flash but the lever does not latch
to signal a lane change. Hold the lever until the lane change is completed.
Move the lever up or down until the turn signal begins to flash but the lever does not latch
and release the lever. The turn signal will automatically flash three times.
Choose the appropriate method to signal a lane change based on the road and
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Wiper and Washer Switch
Move the lever to one of the following positions to
operate the windshield wipers:
3
MIST
OFF
1 Mist (MIST) – One sweep operation of the
AUTO 2
front wipers.
2 Auto (AUTO) – Operates the speed-sensing
and rain-sensing (if so equipped) front wipers
intermittently. To increase or decrease wiper
sensitivity, twist the control ring 3 .
4 Low (LO) – Front wipers operate at a
5 High (HI) – Front wipers operate at a
1
LO
4
HI
5
continuous low-speed.
continuous high-speed.
6 Pull the lever toward you to activate the front
washer. The front wipers will operate
several times.
6
9
REAR WIPER AND WASHER
7 Intermittent (INT) – Rear wiper operates
8 Low (ON) – Rear wiper operates at a
intermittently.
continuous low-speed.
9 Push the lever forward to activate the rear
washer. The rear wiper will operate
several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
16
7
INT
8
ON
8
3
9
12
7
1
10
2
11
6
4
5
Heater and Air Conditioner (automatic)
1 AUTO BUTTON
The automatic mode may be used year-round. Press the AUTO button to turn the system
on. The system will automatically control the inside temperature (automatic cooling
and/or dehumidified heating), air flow distribution and fan speed.
2 CLIMATE BUTTON
Press the CLIMATE button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
3 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up
cooler air.
for warmer air or down
for
4 DRIVER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the driver’s side manual air flow control button to manually control the driver’s
side air flow mode.
The following air flow modes will display on the control panel display screen:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the front defroster and foot vents.
5 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passenger’s side
temperature control buttons up for warmer air or down for cooler air.
6 DUAL BUTTON
Press the DUAL button to turn the passenger’s side temperature controls on or off. This
will allow the passenger’s side temperature to be adjusted independently from the
driver’s side by pressing the passenger’s side temperature control buttons.
7 FAN SPEED CONTROL BUTTONS
Press the left button to decrease the fan speed or press the right
increase the fan speed.
button to
17
fi rs t dr i v e f e a t u r e s
8 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the front defroster button
to turn the system on. The A/C automatically turns on
when the front defroster mode is selected. This feature removes humidity from the air.
To defrost the front and side windows, set the temperature controls 3 and fan speed
controls 7 to their maximum settings.
9 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
to turn the system on or off.
This function automatically turns off after approximately 15 minutes.
10 REAR AIR CONDITIONER
To control the rear automatic air conditioning
system with the front air conditioner control panel:
1. T urn on the front climate control system by
pressing the AUTO button 1 .
2. P
ress the REAR button.
When the rear automatic air conditioning system is on, the indicator light on the REAR
button will illuminate and the front display will switch to the “Rear Air-conditioning”
screen. Use the driver’s temperature and fan speed buttons to adjust the settings.
To adjust the front air conditioning system, press the REAR button again.
To turn off the rear automatic air conditioning system from the front controls, press the
REAR button until the “Rear Air-conditioning” screen is displayed. Then press the
OFF button 12 .
The rear control buttons will not function when the “Rear Air-conditioning” screen is
shown on the front display.
11 AIR RECIRCULATION BUTTON
Press the intake air control
button to recirculate interior air inside the vehicle. The
indicator light on the button will illuminate. This system is used to avoid certain
outside odors and to help adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the climate control system is in the
.
front defroster mode
Press the intake air control
button again to change the air circulation from the
intake air to the outside air. The
indicator light on the button will extinguish.
12 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
Rear Climate Controls
To activate the system:
1.Turn on the front climate control system by
pressing the AUTO button 1 .
2.Press the REAR button 2 on the front control
panel until the “Rear Air-conditioning” screen is displayed.
18
• The indicator light will illuminate.
1
2
• The OFF 3 , fan speed 4 , temperature 5
and AUTO 6 buttons will now control the rear
climate control system.
3.Press the REAR button 2 again, and the screen
will return to what was previously displayed.
3
• The indicator light will stay illuminated to
indicate that the rear climate control system
is active.
5
4
6
OFF button 3 – Turns off the rear climate control system and REAR button indicator light.
Fan speed control buttons 4 – Press
or
to increase or decrease fan speed.
Temperature increase and decrease buttons 5 – Adjust the rear temperature up
or down .
AUTO button 6 – The system automatically works to keep air flow and fan speed at a
constant temperature.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
2
1
3
5
6
4
FM/AM/SiriusXM®* Satellite Radio with CD/DVD Player (if so equipped)
1 ON•OFF BUTTON/VOL (volume) CONTROL KNOB
Press the ON•OFF button to turn the system on or off.
Turn the VOL (volume) control knob right or left to increase or decrease the volume.
2 AUDIO BUTTON/TUNE/FOLDER KNOB
Press the AUDIO button to access the audio settings screen.
To manually tune the radio, turn the TUNE/FOLDER knob left or right.
3 SEEK•CAT/TRACK BUTTON
To scan quickly and stop at the previous or next broadcast station, press the
end of the SEEK•CAT/TRACK button.
For satellite radio, press the
or
end of the SEEK•CAT/TRACK button to switch
to the first channel of the previous or next category.
To change tracks on a CD, press the
To rewind or fast forward a track on a CD, press and hold the
SEEK•CAT/TRACK button.
or
or
end of the SEEK•CAT/TRACK button.
or
end of the
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional satellite radio subscription service.
19
fi rs t dr i v e f e a t u r e s
4 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and 18 for
satellite radio.
To store a station in a preset, you must first select a radio band by pressing the FM•AM 5 or XM 6 button then tune to the desired FM, AM or satellite radio station.
Next press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
display, and the sound will resume. Programing is now complete.
To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
USB (Universal Serial Bus) Connection Port/iPod® Interface
The USB port 1 is located in the center console
under the armrest.
When a compatible USB memory device or iPod®
is plugged into the USB port, compatible audio
and video files stored on the device can be played
through the vehicle’s audio system and front display.
1
USB/iPOD® CHARGING PORTS
There is a USB/iPod® port located in the 2nd row on
the back of the center console 2 and two ports in
the 3rd row located above the cup holders 3 . These
ports will charge compatible devices.
2
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
3
Conventional (Fixed Speed) Cruise Control
4
The cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 mph (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
20
3
1
2
To activate the cruise control, push the CRUISE ON/OFF switch 1 on the steering wheel.
The CRUISE indicator light in the instrument panel will illuminate.
To set a cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET
switch 2 on the steering wheel and release. The SET indicator light in the instrument panel
will illuminate. Take your foot off the accelerator pedal. Your vehicle will
maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 3 on the
steering wheel. When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 2 on the
steering wheel. Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 4 on the steering wheel.
To turn off cruise control, push the CRUISE ON/OFF switch 1 on the steering wheel. Both
the CRUISE indicator light and the SET indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Intelligent Cruise Control (ICC) (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 1 on the steering
wheel for less than 1.5 seconds. The CRUISE indicator
light 2 will illuminate.
8
7
4
3
Accelerate to the desired speed.
1
Push down on the COAST/SET switch 3 on the
steering wheel and release it. Intelligent Cruise
Control will be set to the desired speed.
Press the distance button 4 on the steering wheel
repeatedly to change the set distance between long,
middle and short.
2
When a vehicle is not detected ahead of you in the lane, the set distance
and set vehicle speed indicator lights will illuminate 5 in set mode.
5
6
When a vehicle is detected ahead of you in the lane, the vehicle ahead
detection, set distance and set vehicle speed indicator lights will illuminate 6 in set mode.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 7 on the steering
wheel. When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 3 on the steering
wheel. Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 8 on the steering wheel or tap the
brake pedal. The set vehicle speed indicator 5 will extinguish.
To turn off Intelligent Cruise Control, press the CRUISE ON/OFF button 1 on the steering
wheel. The CRUISE indicator light 2 in the instrument panel will extinguish.
21
fi rs t dr i v e f e a t u r e s
To set conventional (fixed speed) cruise control mode:
While Intelligent Cruise Control is off, press the CRUISE ON/OFF button 1 on the steering
wheel and hold it down for more than 1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch on the steering wheel and release it. The SET indicator
light will illuminate. Cruise control will be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off, and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Power Outlets
12V OUTLETS
1
The power outlets are for powering electrical
accessories such as cellular phones. They are rated
at 12V, 120W (10A) maximum.
To use a power outlet, open the cap.
The power outlets below the control panel 1 ,
inside the center console 2 , and in the
cargo area 3 are powered only when the
ignition switch is in the ACC or ON position.
2
3
120V OUTLET (if so equipped)
The 120V outlet 4 is located on the back of the
center console.
4
To use the outlet for devices that require 120V
power, place the ignition switch in the ON position
and push the power inverter switch 5 .
The switch will illuminate when enabled.
5
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
22
INFINITI Mobile Entertainment System (MES)
(if so equipped)
With this entertainment system, you can play video
files via a DVD or CD, providing images and sound
both from the front and rear display screens.
2
1
WATCHING A DVD
1. Insert a DVD into the DVD slot 1 .
2. The DVD will play automatically.
• To watch or control videos on the front display, make sure the vehicle is in the P (PARK)
position and the parking brake is applied.
REAR DISPLAYS
To turn the rear displays on or off from the front seats:
1. P
ress the SETTING button 2 on the
control panel.
2. Select the “Rear Display” key on the display.
3. Toggle the “L” (Left) or “R” (Right) display 3
on or off.
To access standard DVD controls on the front
display while playing a DVD on the rear display,
press the DISC•AUX button on the control panel while the vehicle is in
the P (PARK) position and the parking
brake is applied.
3
5
4
To turn the rear displays on or off from the rear seats:
1. Select the desired seat by sliding the DISPLAY SELECT switch 4 on
the remote control to the L (Left) or R (Right) position.
2. Press the POWER
button 5 on the remote control.
To control the DVD from the rear seats, use the
remote control.
OPERATING TIPS
You can also connect auxiliary devices, such as
video games, camcorders or portable video players,
to the auxiliary jacks. (Your device will be controlled
through its own control panel.)
Rear Auxiliary Mode allows rear seat passengers to
independently display different sources on
each screen.
Use the headphones, also provided with the system,
to listen to audio wirelessly and independently.
For the best audio sound quality, please make sure
you are facing the monitor directly in front of you.
To reduce driver distraction, movies will not be
shown on the front display while the vehicle is in
any drive position.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)”
of your Owner’s Manual.
23
sys t em gu i d e
Vehicle Information Display
The vehicle information display 1 displays items such as:
Vehicle settings
Trip computer information
Drive system warnings and settings (if so equipped)
Cruise control system
Intelligent Cruise Control (ICC) system
(if so equipped) information
1
Intelligent Key operation information
Indicators and warnings
Tire pressure information
USING THE VEHICLE INFORMATION DISPLAY
2
4
3
The vehicle information display modes can be changed
using the
button 2 and ENTER button 3 located on
the steering wheel.
5
1.Press the
button 2 on the steering wheel to
enter the vehicle information display menu items.
2.Press the button 4 on the steering wheel to navigate through the items in the vehicle
information display.
3.Press the ENTER button 3 on the steering wheel to change or select an item in the vehicle
information display.
4. Press the
button 5 on the steering wheel to go back to the previous menu.
START-UP DISPLAY
When the ignition switch is placed in the ON or ACC position, the screens that display in the
vehicle information display include:
Active system status (if so equipped)
Trip computer
Tire pressure information
Fuel economy
Warnings (displays when a warning is present)
6
RESETTING THE TRIP COMPUTER
1.Press the
button 2 on the steering wheel until
you reach the trip computer mode 6 .
2. Press the
button 2 on the steering wheel again for more than 1.5 seconds to reset
average fuel consumption, average speed, distance to empty and journey time.
SETTINGS
The setting mode allows you to change the information displayed in the vehicle
information display:
Driver Assistance (if so equipped)
Vehicle Settings
Main Menu Selection
Language
Body Color
Unit
Maintenance
Welcome Effects
Alarms
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
24
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
If the Voice Recognition system does not recognize
your voice commands:
Bluetooth®
1. Be sure to wait for the tone/beep before speaking
Controls
a command.
2. Reduce background noise as much as possible by
closing the windows and moonroof.
3. Make sure there are no other conversations in the
vehicle at the same time.
4. Lower HVAC blower fan speed and point vents
away from the ceiling microphone.
5. Speak naturally. Speaking too fast, too slow, too
soft, or too loud makes voice recognition
more difficult.
6. Confirm that the correct voice commands are
being used. Glance at the screen to see the
currently available commands.
Microphone
7. Train the system using the Speaker Adaptation
Mode. See your Owner’s Manual for detailed information.
or button on the steering wheel to interrupt the voice prompts at any time
Press the
and speak a command after the tone.
For vehicles not equipped with Navigation:
• To use the system faster, you may speak the second level commands with the main
or button on the
menu command on the main menu. For example, press the
steering wheel, and after the tone, say “Call Redial”.
For vehicles equipped with Navigation:
• This system has an Alternate Command Mode setting that allows the total number and
length of prompts to be reduced. When the Alternate Command Mode is activated, you
may speak second level commands with the main menu command. For example, press
or button on the steering wheel, and after the tone, say “Call” followed by a
the
stored entry.
The “Help” command can be used to hear a list of available commands at any time.
Reduce background noise as much as possible by closing windows and pointing HVAC
vents away from the ceiling.
Speak naturally without long pauses and without raising your voice.
To cancel a Voice Recognition session, say “Cancel” or “Quit” or press and hold the
button on the steering wheel for 5 seconds.
or
To go back to the previous command, say “Go back” or “Correction”.
For more detailed information and instructions, refer to your cellular phone’s Owner’s
Manual and visit www.InfinitiUSA.com/bluetooth.
*Some jurisdictions prohibit the use of cellular telephones while driving.
25
sys t em gu i d e
Bluetooth® System without Navigation (if so equipped)
CONNECTING PROCEDURE
1.Press the
button on the steering wheel. The
system announces the available commands.
2. Say “Connect Phone”. The system acknowledges
the command and announces the next set of
available commands.
3. Say “Add Phone”. The system acknowledges the
command and asks you to initiate connecting from
the cellular phone handset.
4. Initiate connecting from the cellular phone.
• The connecting procedure varies according to
each cellular phone model. For detailed connecting instructions and a list of compatible
cellular phones, please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN, enter “1234” from the handset. (The PIN is assigned by
INFINITI and cannot be changed.)
• For cellular phones that support Simple Secure Pairing (SSP), confirm that the PIN on the
vehicle display matches the PIN displayed on the cellular phone.
5. Say the name of the cellular phone when the system asks you to provide one. You can give
the cellular phone a name of your choice.
• Some cellular phones may require you to accept certain permissions in order to enable
features on your Bluetooth® system. During the Bluetooth® pairing process, please check
your cellular phone’s display for a pop-up with the request to grant phonebook access.
• Granting phonebook access permission will allow your contacts to be downloaded to the
vehicle’s Bluetooth® system. A pop-up may display on your cellular phone stating that
the Bluetooth® system would like to access your contacts and call history. Please select
“Allow” or “Yes” to grant this permission. If your cellular phone presents the option to not
show the message again, please make sure that this item is checked. Doing so will ensure
that any changes to your phonebook will be synced with the Bluetooth®
system automatically.
PHONEBOOK
Depending on your cellular phone, the system may automatically download the entire
phonebook. For more information, please visit www.InfinitiUSA.com/bluetooth or refer to
your cellular phone’s Owner’s Manual.
If the phonebook does not download automatically, 40 entries can be
individually downloaded.
26
To manually download entries:
1. Press the
button on the steering wheel.
2. After the tone, say “Phonebook”.
3. After the next tone, say “Transfer Entry”.
4. Using the cellular phone, select an entry to send to the vehicle. Please consult the
website above or your cellular phone’s Owner’s Manual for specific steps.
5. The system will speak the transferred entry. Confirm the entry by saying “Yes” after
the tone.
MAKING A CALL BY PHONEBOOK ENTRY
In some cases, names stored using all UPPERCASE letters may not be recognized by the
Voice Recognition system.
1. Press the
button on the steering wheel.
2. After waiting for the tone, say “Call”.
3. After the next tone, speak the name of a phonebook entry. For example, “Michael Smith”.
4. Confirm that the correct name is recognized by saying “Dial” after the tone.
MAKING A CALL BY PHONE NUMBER
1. Press the
button on the steering wheel.
2. After waiting for the tone, say “Call”.
3. After the next tone, say “Phone Number”.
4. After the next tone, say “123-456-7890”.
• You may also say the digits in groups of 3, 3 and 4, respectively. To use this group dialing
method, say only the first 3 digits of the phone number instead of all 10 digits. After the
system recognizes the digits, it will request the next 3 digits and finally the
last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “Dial”.
RECEIVING/ENDING A CALL
To accept the call, press the
To reject the call, press the
To hang up, press the
button on the steering wheel.
button on the steering wheel.
button on the steering wheel.
Bluetooth® System with Navigation (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the cellular phone.
27
sys t em gu i d e
1.Press the SETTING button on the control panel and
select the “Bluetooth” key on the display.
2. Select the “Connect Bluetooth” key.
3.A pop-up box will appear on the screen, prompting
you to confirm that the connection is for the cellular
phone system. Select the “Yes” key.
4. Initiate connecting from the cellular phone.
• The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible cellular phones, please visit
www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN, enter “1234” from the
handset. (The PIN is assigned by INFINITI and
cannot be changed.)
• For cellular phones that support Simple Secure
Pairing (SSP), confirm that the PIN on the vehicle
display matches the PIN displayed
on the cellular phone.
5. When connecting is complete, the screen will return
to the Bluetooth® “Settings” screen.
• Some cellular phones may require you to accept
certain permissions in order to enable features on
your Bluetooth® system. During the Bluetooth®
pairing process, please check your cellular
phone’s display for a pop-up with the request to
grant phonebook access.
28
• Granting phonebook access permission will allow your contacts to be downloaded to
the vehicle’s Bluetooth® system. A pop-up may display on your cellular phone stating
that the Bluetooth® system would like to access your contacts and call history. Please
select “Allow” or “Yes” to grant this permission. If your cellular phone presents the
option to not show the message again, please make sure that this item is checked.
Doing so will ensure that any changes to your phonebook will be synced with the
Bluetooth® system automatically.
PHONEBOOK SETUP
Depending on your cellular phone, the system may
automatically download your cellular phone’s entire
phonebook to the vehicle’s Bluetooth® system.
If the phonebook does not download automatically,
the vehicle’s phonebook may be set for up to
1,000 entries.
To manually download entries:
1.Press the button on the steering wheel and
select the “Quick Dial” key.
2.Select the “Add New” key at the top of
the display. There are different methods to
input a phone number. Select one of the
following options:
• “Copy from Call History” to save a number from the Outgoing, Incoming or Missed
Calls lists.
• “Copy from the Handset” to save a number that has been downloaded from your
handset to the vehicle.
• “Enter Number by Keypad” to input the number and name manually.
MAKING A CALL
To make a call, follow this procedure:
1.Press the button on the steering wheel. The
“Phone” menu will appear on the control
panel display screen.
2.Select the “Quick Dial”, “Call History”,
“Phonebook” or “Dial Number” key.
3. Select the desired entry from the list.
4.Dialing begins when the entry is selected or when
the “OK” key is selected.
RECEIVING/ENDING A CALL
To accept the call, press the button on the
steering wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang up, press the button on the steering
wheel or touch the “Hang up” key.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
29
sys t em gu i d e
Bluetooth® Streaming Audio with Navigation (if so equipped)
If you have a compatible Bluetooth® device with streaming audio (A2DP and AVRCP
profiles), you can set up the wireless connection between your Bluetooth® device and your
vehicle’s audio system. This connection allows you to listen to audio from the Bluetooth®
device using your vehicle’s speakers.
A cellular telephone should not be used while driving so full attention may be given to
vehicle operation.*
To use your connected Bluetooth® device to stream
audio, it will need to be connected as an audio
device. The following procedure will initially connect
a Bluetooth® device as an audio player and allow
you to switch between devices.
1.Press the SETTING button on the control panel
and touch the “Bluetooth” key on the display.
2.Select “Connected Devices”.
3.Select “Audio Player”.
4. Select the name of the device that you are
attempting to connect as an audio player.
5.Select “Select”.
6. Verify that the system confirms that the device
has been selected as an audio player.
Once your Bluetooth® device has been connected
as an audio device, push the DISC•AUX button on
the control panel to select the Bluetooth® Streaming
Audio player.
Bluetooth® connectivity issues can usually be
resolved with a reboot of your cellular phone if
you do not regularly turn off your cellular phone.
Otherwise, try updating your cellular phone with the latest software.
*Some jurisdictions prohibit the use of cellular telephones while driving.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s
Manual or visit www.InfinitiUSA.com/bluetooth.
30
7
5
8
10
2
6
4
1
3
17
Navigation System (if so equipped)
Your Navigation System can calculate a route from your current location to a preferred
destination. The real-time map display and turn-by-turn voice guidance will lead you along
the route.
The Navigation System will continually update your vehicle’s position. If you have deviated
from the original route, it will recalculate the route from your current location.
SYSTEM OPERATION
Move through the menus and on-screen keys by sliding or rotating the Infiniti controller
1 to highlight an item on the screen and pressing the ENTER button 2 to select the
highlighted item, or touch the desired key on the touch-screen display.
Press the
BACK button 3 to return to the previous screen. In a settings screen, this
button can also be used to apply the setting. In a character input screen, this button can
also delete the characters that have been entered.
Press the MAP button 4 to display the map. While following a programed route, press
multiple times to change the type of route information.
To display the vehicle, traffic (if so equipped), weather (if so equipped) or Voice
Recognition information, press the INFO (information) button 5 .
Press the
OFF button 6 to switch between the day screen (bright) and the night
screen (dark). Press and hold the button to turn the display off. Press again to turn the
display on.
To display system settings, press the SETTING button 7 .
31
sys t em gu i d e
SETTING A ROUTE
To set a route, first ensure that the correct region is selected on the touch-screen.
1. Press the DEST button 8 on the control panel.
2. Select the “Change Region” key 9 .
3. Select the preferred region.
9
Once this is complete, select your destination:
1. Press the DEST button 8 on the control panel.
2. Select the preferred destination setting method.
3.Enter the address number, street name, and city
as prompted by the screen.
CANCELING A ROUTE
1. Press the ROUTE button 10 on the control panel.
11
2. Select the “Cancel Route” key 11 .
MOVING AROUND THE MAP
To scroll the map, slide the Infiniti controller 1 in
the direction you want to scroll.
CHANGING THE MAP VIEW
It is possible to switch between two different map views: 2D and bird’s-eye view (3D).
To switch to the preferred map view:
1.With the map displayed, press the ENTER
button 2 on the control panel.
2.Select the “Change View” key 12 to change the
view to 2D or bird’s-eye view (3D).
3.Select the “Map Settings” key 13 to change the
orientation of the map.
12
13
VOICE GUIDANCE
To activate voice guidance:
1. Press the ROUTE button 10 on the control panel.
2.Select the “Guidance Settings” key 14 .
3.To ensure that voice guidance is activated, select
the “Guidance Voice” key 15 . The indicator
14
illuminates if voice guidance is activated.
To adjust the guidance volume, select the
“Guidance Volume” key 16 .
To hear the current guidance during a programed
route, press the VOICE button 17 .
For more information, refer to your Navigation System Owner’s Manual.
32
16
15
HOMELINK
HomeLink® Universal Transceiver (if so equipped)
The HomeLink® Universal Transceiver can learn and consolidate the functions of up to
three different hand-held transmitters, operating items such as garage doors, property
gates, outdoor and indoor lights or alarm systems.
To program the HomeLink® Universal Transceiver:
• Position the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.
• Press and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
• Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button and observe the
indicator light:
• A solid, continuous light indicates the programing is complete and the HomeLink button
will activate your device.
• A blinking light that turns to a solid, continuous light after 2 seconds indicates additional
steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:
• At the receiver of the device that you are programing to the HomeLink button, press
and release the learn or smart button (the name may vary by manufacturer, but it is
usually located near where the hanging antenna wire is attached to the unit). You have
approximately 30 seconds to initiate the following step.
• Press and hold the programed HomeLink button for 2 seconds and release.
You may have to repeat the previous two steps up to three times to complete the
programing process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website
at www.homelink.com or call 1-800-355-3515.
33
mem o
me mo
mem o
me mo
Helpful Resources
Printing: December 2015 (07) / QR16EA 0L50U0 / Printed in USA
Below is a list of helpful resources that can be used to learn more about the vehicle’s systems
and feature operations.
• Vehicle Owner’s Manual
•Infiniti Client Support
•Owner Portal
•Infiniti Roadside Assistance
•Infiniti Connection™
•Infiniti Elite® Extended Protection Program
•SiriusXM Radio
1-800-662-6200
Support is always available if your Infiniti retailer
cannot assist you or you would like to provide
Infiniti directly with comments or questions.
1-800-662-6200 (option 1)
As part of the Infiniti Total Ownership
Experience®, Roadside Assistance is
available to you, 24 hours a day 365 days a
year, for emergency roadside assistance.
1-800-662-6200
Infiniti Elite® Assurance Products provide
you with quality long-term protection
and enhanced peace of mind.
•Infiniti Financial Services Client Support
1-800-627-4437
For client support with your Infiniti
Financial Services loan or lease.
•Infiniti Financial Services
1-855-444-7244
www.owners.InfinitiUSA.com/iowners
Your Infiniti Owner Portal account contains
your personal preferences, vehicle information
and links to key vehicle features and services.
1-800-334-7858
www.InfintiUSA.com/intouch/connection
The suite of digital alerts and remote
services are your direct link to personal
security, convenience and confidence.
1-877-447-0011
For support with your SiriusXM subscription.
•Infiniti USA.com
www.InfinitiUSA.com/bluetooth
Reference this site for a list of compatible
cellular phones and instructions on how to
pair your cellular phone to your vehicle.
•Infiniti Electronic Quick Reference Guide
(use Quick Response (QR) code or URL below)
www.infinitifinance.com
Use the IFS Online Account Manager to check
your account status, schedule recurring
payments and access important forms.
To view detailed instructional videos, go to
www.infinitiownersinfo.mobi/2016/qx60
or snap this barcode with an appropriate
barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the unique features of your new vehicle.
Please see your Owner’s Manual for important safety information and system operation limitations. Features and
equipment in your vehicle may vary depending on model, trim level, options selected, order, date of production,
region or availability. Therefore, you may find information about features or equipment that are not included or
installed on your vehicle.
All information, specifications and illustrations in this Quick Reference Guide are those in effect at the time
of printing. INFINITI reserves the right to change specifications, performance, design or component suppliers
without notice and without obligation. From time to time, INFINITI may update or revise this Quick Reference
Guide to provide owners with the most accurate information currently available. Please carefully read and retain,
with this Quick Reference Guide, all revision updates sent to you by INFINITI to ensure you have access to
accurate and up-to-date information regarding your vehicle. Current versions of vehicle Quick Reference
Guides, Owner’s Manuals and any updates can also be found in the Owner section of the INFINITI website at
https://owners.infinitiusa.com/iowners/navigation/manualsAndGuides. If you have questions concerning any
information in your Owner’s Manual, contact INFINITI Client Support (see contact information listed above).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement