Intel® Solid-State Drive 535 Series (M.2) Product Specification

Intel® Solid-State Drive 535 Series (M.2) Product Specification
Intel® Solid-State Drive 535 Series (M.2)
Intel® Solid-State Drive 535 Series (M.2)
Product Specification
Capacities:
Form
120GB, 180GB, 240GB, 360GB
Factors:

80mm (single-sided) 2280-S2-B-M (180GB)

80mm (double-sided) 2280-D2-B-M
(120GB, 240GB and 360GB)
Thickness:
Weight:
<10 grams
6Gb/s Bandwidth Performance
(IOMeter* Queue Depth 32)
1

Sustained Sequential Read: up to 540MB/s

Sustained Sequential Write: up to 490MB/s
1
Read
and Write IOPS
(IOMeter Queue Depth 32)

Random 4KB Reads: up to 45,000 IOPS

Random 4KB Writes: up to 80,000 IOPS2
Data
Compression
End-to-End
AES

Active (BAPCo MobileMark* 2007 Workload):
140 mW

Idle3: 55 mW

DevSleep: 200µW
Temperature
up to 3.58 mm
SATA
Power
Data Protection
256-bit Encryption
Compatibility

Operating4: 0o C to 70o C

Non-Operating: -55o C to 95o C
Reliability
—
Uncorrectable Bit Error Rate (UBER):
<1 sector per 1016 bits read
—
Mean Time Between Failure (MTBF):
1.2 million hours
—
Shock (operating and non-operating):
1,000 G/0.5 ms
Vibration
—
Operating: 2.17 GRMS (5-700Hz)
—
Non-operating: 3.13 GRMS (5-800Hz)
Certifications
and Declarations:

UL*

CE*

C-Tick*

BSMI*
SATA Revision 3.2

KCC*

ACS-3 (ATA/ATAPI Command Set 3)

Microsoft* WHCK

SSD Enhanced SMART ATA feature set

VCCI*

SATA-IO*

Intel® SSD Toolbox with Intel® SSD Optimizer

Intel® Data Migration Software

Intel® Rapid Storage Technology

Power
Management

3.3 V SATA Supply Rail

SATA Link Power Management (LPM)

Advanced Power Management (APM)

Device Sleep (DevSleep)
Product

Ecological Compliance
RoHS*
NOTES:
1.
2.
3.
4.
Performance values vary by capacity.
Random 4KB writes measured using out-of-box SSD.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the system for maintaining proper
device operating temperatures on heavier workloads.
Order Number: 332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Ordering Information
Contact your local Intel sales representative for ordering information.
Revision History
Revision Number
001
002
Description
 Initial release
 Updated Performance Rating in Table 4, 360GB Capacity
 Updated Figure 2 title
Revision Date
April 2015
April 2015
Tests document performance of components on a particular test, in specific systems. Differences in hardware, software, or
configuration will affect actual performance. Consult other sources of information to evaluate performance as you consider your
purchase.
IOMeter* Test and System Configurations: Intel® Core™ i5-2400S (6MB L3 Cache, 2.5GHz), Intel Desktop Board DH67CF, Intel HD
Graphics driver 9.17.10.2875, BIOS: BLH6710H.84A.0160.2012.1204.1156, Chipset: Intel INF 9.2.0.1016, Memory: 4GB (2X2GB)
Kingston DDR3-1333, Intel RST driver 12.9, Microsoft Windows 7 Enterprise 64-bit with SP1.
For more complete information about performance and benchmark results, visit http://www.intel.com/performance.
All documented endurance test results are obtained in compliance with JESD218 Standards; refer to individual sub-sections
within this document for specific methodologies. See www.jedec.org for detailed definitions of JESD218 Standards.
Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel
components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate
meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the
environment.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Product Specification
2
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Copyright © 2015 Intel Corporation. All rights reserved.
April 2015
332175-002US
Product Specification
3
Intel® Solid-State Drive 535 Series (M.2)
Contents
1
1.1
1.2
Overview ......................................................................................................................................................................... 6
Terms and Acronyms ................................................................................................................................................................................ 7
Reference Documents ............................................................................................................................................................................... 8
2
Product Specifications ................................................................................................................................................. 9
2.1
2.2
2.3
2.4
2.5
2.6
Capacity ........................................................................................................................................................................................................... 9
Performance .................................................................................................................................................................................................. 9
Electrical Characteristics ....................................................................................................................................................................... 10
Environmental Conditions ................................................................................................................................................................... 11
2.4.1
Temperature, Shock, Vibration .................................................................................................................................... 11
2.4.2
Altitude .................................................................................................................................................................................... 11
Product Regulatory Compliance ....................................................................................................................................................... 12
Reliability ...................................................................................................................................................................................................... 13
3
Mechanical Information ............................................................................................................................................ 13
4
Pin and Signal Descriptions...................................................................................................................................... 16
4.1
4.2
4.3
Pin Locations .............................................................................................................................................................................................. 16
Signal Descriptions .................................................................................................................................................................................. 17
Device Sleep Feature .............................................................................................................................................................................. 18
5
Supported Command and Feature Sets ................................................................................................................. 19
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
Supported ATA General Feature Command Set........................................................................................................................ 19
Advanced Power Management (APM) ............................................................................................................................................ 21
Security ......................................................................................................................................................................................................... 22
5.3.1
Sanitization Methods ........................................................................................................................................................ 22
Device Statistics ........................................................................................................................................................................................ 22
Software Settings Preservation ......................................................................................................................................................... 23
DevSleep ...................................................................................................................................................................................................... 24
SMART Command Transport .............................................................................................................................................................. 24
SMART Attributes ..................................................................................................................................................................................... 25
SMART Logs ................................................................................................................................................................................................ 27
6
Certifications and Declarations ............................................................................................................................... 28
7
Appendix ...................................................................................................................................................................... 29
7.1
7.2
Identify Device ........................................................................................................................................................................................... 29
Models ........................................................................................................................................................................................................... 33
Product Specification
4
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Tables
Table 1:
Table 2:
Table 3:
Table 4:
Table 5:
Table 6:
Table 7:
Table 8:
Table 9:
Table 10:
Table 11:
Table 12:
Table 13:
Table 14:
Table 15:
Table 16:
Table 17:
Table 18:
Table 19:
Table 20:
Table 21:
Table 22:
Table 23:
Table 24:
Glossary of Terms and Acronyms .................................................................................................................................. 7
Standard References ........................................................................................................................................................... 8
User Addressable Sectors ................................................................................................................................................. 9
Compressible Performance .............................................................................................................................................. 9
Incompressible Performance........................................................................................................................................... 9
Latency .................................................................................................................................................................................... 10
Operating Voltage and Power Consumption ........................................................................................................ 10
Temperature, Shock, Vibration .................................................................................................................................... 11
Product Regulatory Compliance Specifications ................................................................................................... 12
Reliability Specifications ................................................................................................................................................. 13
M.2 Serial ATA Power Pin Definitions ....................................................................................................................... 17
Supported ATA Commands and Feature Sets ...................................................................................................... 19
APM Subcommand Codes for Power Management and Definitions .......................................................... 21
APM Subcommand Codes for Thermal Power Management and Definitions ....................................... 22
Supported Secure Erase Modes and Definitions ................................................................................................. 22
Supported Sanitize Device Modes and Definitions ............................................................................................ 22
Device Statistics Log ......................................................................................................................................................... 23
Preserved Software Settings ......................................................................................................................................... 23
DevSleep Control Parameters ...................................................................................................................................... 24
SMART Attributes ............................................................................................................................................................... 25
SMART Attribute Status Flags ...................................................................................................................................... 27
Device Certifications and Declarations ..................................................................................................................... 28
Identify Device Returned Sector Data ....................................................................................................................... 29
Available Models ................................................................................................................................................................ 33
Figures
Figure 1:
Figure 2:
April 2015
332175-002US
Dimensions for Full Size M.2 Drives ........................................................................14
Layout of Signal and Power Segment Pins ................................................................16
Product Specification
5
Intel® Solid-State Drive 535 Series (M.2)
1
Overview
The Intel® SSD 535 Series is the next generation of Intel Consumer Family drives that continue to
deliver reliable performance and low power consumption with high quality. The Intel SSD 535 Series is
built for a wide range of consumer and embedded platforms. Along with a variety of capacities, the
Intel SSD 535 Series offers:

High I/O and throughput performance

Low power consumption

High reliability

Advanced Encryption Standard (AES) 256-bit Encryption

End-to-End Data Protection

Data Compression
The Intel SSD 535 Series is aligned with the latest version of the Intel® SSD Toolbox for monitoring and
maintaining the health of the SSD. To find the latest version of Intel SSD Toolbox, and for more
information on the Intel SSD 535 Series, visit www.intel.com/ssd and click on the Consumer Family or
Resource Center links.
Product Specification
6
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
1.1
Terms and Acronyms
Table 1:
Glossary of Terms and Acronyms
Term
Description
AHCI*
Advanced Host Controller Interface
APM
Advanced Power Management
ATA
Advanced Technology Attachment
DAS
Device Activity Signal
DevSleep
Device Sleep
DIPM
Device Initiated Power Management
DMA
Direct Memory Access
DPTF
Dynamic Platform Thermal Framework
eDrive
Microsoft* specification for a drive that complies to the TCG Opal 2.0 and IEEE 1667* standards
EXT
Extended
FPDMA
First Party Direct Memory Access
GB
Gigabyte (1,000,000,000 bytes)
Note: The total usable capacity of the SSD may be less than the total physical capacity because a small
portion of the capacity is used for NAND flash management and maintenance purposes.
HDD
Hard Disk Drive
HIPM
Host Initiated Power Management
I/O
Input/Output
IOPS
Input/Output Operations Per Second
KB
Kilobyte (1,024 bytes)
LBA
Logical Block Address
LPM
Link Power Management
MB
Megabyte (1,000,000 bytes)
MLC
Multi-level Cell
MTBF
Mean Time Between Failures
NCQ
Native Command Queuing
NOP
No Operation
PIO
Programmed Input/Output
PSID
Physical Security ID, public drive-unique value
RDT
Reliability Demonstration Test
RMS
Root Mean Squared
SATA
Serial Advanced Technology Attachment
SED
Self-Encrypting Drive
SMART
Self-Monitoring, Analysis and Reporting Technology
SSD
Solid-State Drive
TYP
Typical
UBER
Uncorrectable Bit Error Rate
April 2015
332175-002US
Product Specification
7
Intel® Solid-State Drive 535 Series (M.2)
1.2
Reference Documents
Table 2:
Standard References
Date or Rev. #
Title
Location
Sept 2008
IEC 55022 Information Technology Equipment —
Radio disturbance Characteristics— Limits and
methods of measurement CISPR22:2008 (Modified)
http://www.iec.ch/
Dec 2008
VCCI
http://www.vcci.jp/vcci_e/
June 2009
RoHS
http://qdms.intel.com/
Click Search MDDS Database and search
for material description datasheet
August 2010
IEC 55024 Information Technology Equipment —
Immunity characteristics— Limits and methods of
measurement CISPR24:2010
http://www.iec.ch/
Sept 2010
Solid-State Drive (SSD) Requirements and
Endurance Test Method (JESD218)
http://www.jedec.org/standardsdocuments/docs/jesd218/
August 2013
Serial ATA Revision 3.2
http://www.sata-io.org/
October 2013
ACS-3 Specification
http://www.t13.org/
Product Specification
8
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
2
Product Specifications
2.1
Capacity
Table 3:
User Addressable Sectors
Capacity
Unformatted Capacity (Total User Addressable Sectors in LBA mode)
120GB
234,441,648
180GB
351,651,888
240GB
468,862,128
360GB
703,282,608
2.2
Performance
Table 4:
Compressible Performance
Specification
Random
4KB Read
(up to)1
IOPS
Random
4KB Write
(up to)2
IOPS
Random
4KB Write
(TYP)1
IOPS
120GB
24,000
80,000
37,500
180GB
41,000
80,000
240GB
41,000
360GB
45,000
Capacity
Sequential
128KB Read1
Sequential
128KB Write1
MB/s
MB/s
540
480
49,000
540
490
80,000
49,000
540
490
33,000
29,500
540
490
Note:
1.
2.
Performance measured by Intel using IOMeter* with Queue Depth 32. Measurements are performed on 8 GB of
Logical Block Address (LBA) range on a full SSD.
Random 4 KB writes measured using out-of-box SSD.
Table 5:
Incompressible Performance
Specification
Random
4KB Read
(up to)1
IOPS
Random
4KB Write
(up to)1
IOPS
120GB
18,000
15,000
180GB
37,500
240GB
37,500
360GB
37,500
Capacity
Sequential
128KB Read1
Sequential
128KB Write1
MB/s
MB/s
450
130
17,000
470
170
23,000
510
230
10,000
525
240
Note:
1.
Performance measured by Intel using IOMeter* with Queue Depth 32
April 2015
332175-002US
Product Specification
9
Intel® Solid-State Drive 535 Series (M.2)
Table 6:
Latency
Intel SSD 535 Series
Specification
120GB
180GB
240GB
Read1
360GB
480GB
80 µs (TYP)
Write1
85 µs (TYP)
500 ms (TYP)
Power On To Ready2
<10 s
Max Power On To Ready3
Note:
1.
2.
3.
Based on sequential 4KB using IOMeter with Queue Depth 1 workload with compressible (non-random) data
pattern. Write Cache enabled.
Power On To Ready time assumes safe shutdown
Max Power On To Ready time assumes unsafe shutdown. Based on statistical measurement of 95% quality of
service.
2.3
Electrical Characteristics
Table 7:
Operating Voltage and Power Consumption
Value
Electrical Characteristics
120GB
180GB
240GB
360GB
Operating Voltage for 5 V (±5%)
Min
3.14 V
Max
3.47 V
Rise Time (Max/Min)
100 ms / 0.1 ms
Fall Time (Max/Min)
5 s / 1 ms
Noise Tolerance
70 mV pp (10 Hz – 30 MHz)
Min Off Time1
1s
Power Consumption (TYP)
Active2
140 mW
Idle3
55 mW
DevSleep4
200 µW
Thermal Power5
3.1 W
3.7 W
4.5 W
4.5 W
Regulator Power6
3.4 W
4.0 W
4.9 W
5.5 W
NOTES:
1.
2.
3.
4.
5.
6.
Minimum time from when power removed from drive (Vcc < 100 mV) to when power can be reapplied to drive.
Active power measured during execution of MobileMark* 2007 with SATA Link Power Management (LPM) enabled.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
Power consumption during DevSleep state.
Power measured during 128kB sequential writes with Queue Depth 32 workload using 100 ms sample period. This
represents power that would be thermal load on system during heavy workloads.
Power measured during 128kB sequential writes with Queue Depth 32 workload using 500 us sample period. This
represents power that system power supply would have to regulate for proper device operation.
Product Specification
10
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
2.4
Environmental Conditions
2.4.1
Temperature, Shock, Vibration
Table 8:
Temperature, Shock, Vibration
Electrical Characteristics
Range
Module Temperature
Operating1
0° C – 70° C
Non-operating
2
-55° C – 95° C
Temperature Gradient3
Operating
30 (TYP)° C/hr
Non-operating
30 (TYP)° C/hr
Humidity
Operating
5 – 95 %
Non-operating
5 – 95 %
Shock and Vibration
Range
4
Shock
Operating
1,000 G (Max) at 0.5 msec
Non-operating
1,000 G (Max) at 0.5 msec
5
Vibration
Operating
2.17 GRMS (5-700 Hz) Max
Non-operating
3.13 RMS (5-800 Hz) Max
NOTES:
1.
2.
3.
4.
5.
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the system for
maintaining proper device operating temperature on heavier workloads.
Please contact your Intel representative for details on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specifications assume SSD is mounted securely with the input vibration applied to the drive-mounting
screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using peak acceleration and
pulse width value.
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the drive-mounting
screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is measured using G Root Mean
Squared (GRMS) value.
2.4.2
Altitude
The drive is not sensitive to changes in atmospheric pressure because it has no moving parts. Drive tested under
non-operational conditions to pressures representative of -1 K and +40 K feet.
April 2015
332175-002US
Product Specification
11
Intel® Solid-State Drive 535 Series (M.2)
2.5
Product Regulatory Compliance
The Intel SSD 535 Series meets or exceeds the regulatory or certification requirements in the table below.
Table 9:
Product Regulatory Compliance Specifications
Title
TITLE 47-Telecommunications CHAPTER 1—
FEDERAL COMMUNMICATIONS COMMISSION
PART 15 — RADIO FREQUENCY DEVICES
Description
FCC Part 15B Class B
Region For Which
Conformity Declared
USA
ICES-003, Issue 4 Interference-Causing
Equipment
Standard Digital Apparatus
CAN/CSA – CEI/IEC CISPR 22-10 (Ref. CISPR
22:2008)
Canada
IEC 55024 Information Technology Equipment
— Immunity characteristics— Limits and
methods of measurement CISPR24:2010
EN-55024: 2010 and its amendments
European Union
IEC 55022 Information Technology Equipment
— Radio disturbance Characteristics— Limits
and methods of measurement CISPR22:2008
(Modified)
EN-55022: 2010 and its amendments
European Union
EN-60950-1 2nd Edition
Information Technology Equipment — Safety —
Part 1: General Requirements
USA/Canada
UL/CSA EN-60950-1 2nd Edition
Information Technology Equipment — Safety —
Part 1: General Requirements
USA/Canada
Product Specification
12
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
2.6
Reliability
The Intel SSD 535 Series meets or exceeds SSD endurance and data retention requirements as specified in the
JESD218 specification.
Table 10:
Reliability Specifications
Parameter
Value
Uncorrectable Bit Error Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the specified number of bits
read. In the unlikely event of a non-recoverable read error, the SSD will report it as a
read failure to the host; the sector in error is considered corrupt and is not returned to
the host.
< 1 sector per 1016 bits read
Mean Time Between Failures (MTBF)
Mean Time Between Failures is estimated based on Telcordia* methodology and
demonstrated through Reliability Demonstration Test (RDT).
≥ 1.2 million hours
Minimum Useful Life/Endurance Rating
The SSD will have a minimum of five years of useful life under client workloads with up
to 40 GB† of host writes per day.
5 years
Insertion Cycles
Maximum insertion/removal cycles on M.2 port
†
250 insertion/removal cycles
120GB SSD qualified to 20 GB of host writes per day.
April 2015
332175-002US
Product Specification
13
Intel® Solid-State Drive 535 Series (M.2)
3
Mechanical Information
The figure below shows the mechanical information for the full size M.2 Intel SSD 535 Series. All dimensions are in
millimeters.
Figure 1:
Dimensions for 80 mm single-sided M.2 Form Factor Drives (2280-S2-B-M) 180GB
Product Specification
14
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Figure 2:
Dimensions for 80 mm double-sided M.2 Form Factor Drives (2280-D2-B-M) 120GB, 240GB, 360GB
April 2015
332175-002US
Product Specification
15
Intel® Solid-State Drive 535 Series (M.2)
4
Pin and Signal Descriptions
4.1
Pin Locations
Figure 3:
Layout of Signal and Power Segment Pins
Product Specification
16
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
4.2
Signal Descriptions
Table 11:
M.2 Serial ATA Power Pin Definitions
Pin
Function
Definition
P1
CONFIG_3
Ground
P2
+3.3 V
3.3 V Source
P3
GND
Ground
P4
+3.3 V
3.3 V Source
P5
Reserved
No Connect
P6
Reserved
No Connect
P7
Reserved
No Connect
P8
Reserved
No Connect
P9
Reserved
No Connect
P10
DAS/DSS#
Device Activity Signal / Disable Staggered Spin-up
P11
Reserved
No Connect
P12
Notch
No Connect
P13
Notch
No Connect
P14
Notch
No Connect
P15
Notch
No Connect
P16
Notch
No Connect
P17
Notch
No Connect
P18
Notch
No Connect
P19
Notch
No Connect
P20
Reserved
No Connect
P21
CONFIG_0
Ground
P22
Reserved
No Connect
P23
Reserved
No Connect
P24
Reserved
No Connect
P25
Reserved
No Connect
P26
Reserved
No Connect
P27
GND
Ground
P28
Reserved
No Connect
P29
Reserved
No Connect
P30
Reserved
No Connect
P31
Reserved
No Connect
P32
Reserved
No Connect
P33
GND
Ground
P34
Reserved
No Connect
P35
Reserved
No Connect
P36
Reserved
No Connect
P37
Reserved
No Connect
P38
DEVSLP
DevSleep Pin
P39
GND
Ground
P40
Reserved
No Connect
P41
+B
Host Receiver Differential Signal Pair (This is an output of the SSD)
P42
Reserved
No Connect
P43
-B
Host Receiver Differential Signal Pair (This is an output of the SSD)
P44
Reserved
No Connect
P45
GND
Ground
April 2015
332175-002US
Product Specification
17
Intel® Solid-State Drive 535 Series (M.2)
Pin
Function
Definition
P46
Reserved
No Connect
P47
-A
Host Transmitter Differential Signal Pair (This is an input of the SSD)
P48
Reserved
No Connect
P49
+A
Host Transmitter Differential Signal Pair (This is an input of the SSD)
P50
Reserved
No Connect
P51
GND
Ground
P52
Reserved
No Connect
P53
Reserved
No Connect
P54
Reserved
No Connect
P55
Reserved
No Connect
P56
Two Wire Interface
Two Wire Interface Clock
P57
GND
Ground
P58
Two Wire Interface
Two Wire Interface Data
P59
Notch
No Connect
P60
Notch
No Connect
P61
Notch
No Connect
P62
Notch
No Connect
P63
Notch
No Connect
P64
Notch
No Connect
P65
Notch
No Connect
P66
Notch
No Connect
P67
Reserved
No Connect
P68
Reserved
No Connect
P69
CONFIG_1
Ground
P70
+3.3 V
3.3 V Source
P71
GND
Ground
P72
+3.3 V
3.3 V Source
P73
GND
Ground
P74
+3.3 V
3.3 V Source
P75
CONFIG_2
Ground
4.3
Device Sleep Feature
Device Sleep (or DevSleep/DEVSLP) is the latest feature aligned with Intel® 4th Generation Core™-based
Ultrabook™. Ultrabook™ has stringent power requirements for SSDs and as such requires an ability to put the drive
in a low power state. Although Link Power Management allows some control over power consumption, both
methods still require the SATA link to remain online. The DevSleep pin is an “Enable” (High) pin which is pulled up
by the drive.
Product Specification
18
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
5
Supported Command and Feature Sets
The Intel SSD 535 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial ATA (SATA)
commands defined in the ACS-3 and SATA Revision 3.2 specifications. The mandatory and optional commands are
defined in this section.
5.1
Supported ATA General Feature Command Set
Below are mandatory and optional ATA feature sets supported by Intel SSD 535 Series.










48-Bit Address
Advanced Power Management (APM)
General
General Purpose Logging (GPL)
Native Command Queuing (NCQ)
Power Management
Sanitize Device
Security
SMART
Software Settings Preservation (SSP)
Below are mandatory and optional ATA commands supported by Intel SSD 535 Series.
Table 12:
Supported ATA Commands and Feature Sets
Commands
Feature Set
BLOCK ERASE EXT
CHECK POWER MODE
Power Management
CRYPTO SCRAMBLE EXT
Sanitize Device
DATA SET MANAGEMENT
ATA General Feature
DOWNLOAD MICROCODE
ATA General Feature
EXECUTE DEVICE DIAGNOSTIC
ATA General Feature
FLUSH CACHE
ATA General Feature
FLUSH CACHE EXT
IDENTIFY DEVICE
1
48-Bit Address
ATA General Feature
IDLE
Power Management
IDLE IMMEDIATE
Power Management
NOP
ATA General Feature
READ BUFFER
ATA General Feature
READ DMA
ATA General Feature
READ DMA EXT
April 2015
332175-002US
Sanitize Device
48-Bit Address
Product Specification
19
Intel® Solid-State Drive 535 Series (M.2)
Commands
Feature Set
READ FPDMA QUEUED
Native Command Queuing
READ LOG DMA EXT
General Purpose Logging
READ LOG EXT
General Purpose Logging
READ MULTIPLE
ATA General Feature
READ MULTIPLE EXT
48-Bit Address
READ NATIVE MAX ADDRESS
48-Bit Address
READ NATIVE MAX ADDRESS EXT
48-Bit Address
READ SECTOR(S)
READ SECTOR(S) EXT
READ VERIFY SECTOR(S)
ATA General Feature
48-Bit Address
ATA General Feature
READ VERIFY SECTOR(S) EXT
48-Bit Address
SANITIZE FREEZE LOCK EXT
Sanitize Device
SANITIZE STATUS EXT
Sanitize Device
SECURITY DISABLE PASSWORD
ATA Security
SECURITY ERASE PREPARE
ATA Security
SECURITY ERASE UNIT
ATA Security
SECURITY FREEZE LOCK
ATA Security
SECURITY SET PASSWORD
ATA Security
SECURITY UNLOCK
ATA Security
SEEK
ATA General Feature
SET FEATURES
ATA General Feature
SET MAX ADDRESS EXT
48-Bit Address
SET MULTIPLE MODE
ATA General Feature
SLEEP
Power Management
SMART DISABLE OPERATIONS
SMART
SMART ENABLE OPERATIONS
SMART
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
SMART
SMART EXECUTE OFF-LINE IMMEDIATE
SMART
SMART READ DATA
SMART
SMART READ ATTRIBUTE THRESHOLDS
SMART
SMART READ LOG
SMART
SMART READ LOG SECTOR
SMART
SMART RETURN STATUS
SMART
Product Specification
20
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Commands
Feature Set
SMART SAVE ATTRIBUTE VALUES
SMART
SMART WRITE LOG SECTOR
SMART
STANDBY
Power Management
STANDBY IMMEDIATE
Power Management
WRITE BUFFER
ATA General Feature
WRITE DMA
ATA General Feature
WRITE DMA EXT
48-Bit Address
WRITE DMA FUA EXT
48-Bit Address
WRITE FPDMA QUEUED
Native Command Queuing
WRITE LOG DMA EXT
General Purpose Logging
WRITE LOG EXT
General Purpose Logging
WRITE MULTIPLE
ATA General Feature
WRITE MULTIPLE EXT
48-Bit Address
WRITE MULTIPLE FUA EXT
48-Bit Address
WRITE SECTOR(S)
ATA General Feature
WRITE SECTOR(S) EXT
48-Bit Address
WRITE UNCORRECTABLE EXT
NOTES:
1.
ATA General Feature
See the Appendix for details on the sector data returned after issuing an IDENTIFY DEVICE command.
5.2
Advanced Power Management (APM)
The Advanced Power Management can be enabled or disabled using the SET FEATURES command.
Table 13:
APM Subcommand Codes for Power Management and Definitions
Subcommand Codes
Definition
10h
Power optimized for connected standby power
40h
Power optimized for lid up
80h
Balanced power/performance for non-connected standby
FEh
Optimized for high performance (Default)
April 2015
332175-002US
Product Specification
21
Intel® Solid-State Drive 535 Series (M.2)
Table 14:
APM Subcommand Codes for Thermal Power Management and Definitions
Subcommand Codes
Definition
60h
Most aggressive thermal setting
6Fh
Light thermal setting
5.3
Security
5.3.1
Sanitization Methods
Sanitization refers to a process to render data inaccessible. Various sanitization methods are listed below.
5.3.1.1
Secure Erase
Secure Erase runs the SECURITY ERASE UNIT command
Table 15:
Supported Secure Erase Modes and Definitions
Secure Erase Mode
Normal Mode
Enhanced Mode
Definition
Full NAND erase of user available space and spare area
Cryptographically erase data
5.3.1.2
Sanitize Device
Table 16:
Supported Sanitize Device Modes and Definitions
Mode
Block Erase
Crypto Scramble Ext
5.4
Definition
Block erase method, all user data areas including user data not currently
allocated, irretrievable
Changes the internal encryption keys
Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the Intel SSD 535
Series can be reported to the host on request through the Device Statistics log as defined in the ATA specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is accessible using
READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
The following table lists the Device Statistics supported by the Intel SSD 535 Series.
Product Specification
22
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Table 17:
Device Statistics Log
Page
Offset
0x00
0x01 - General
Statistics
0x04 - General
Errors Statistics
0x06 - Transport
Statistics
Equivalent SMART attribute
if applicable
Description
-
List of Supported Pages
-
0x08
Power Cycle Count
0Ch
0x10
Power-On Hours
09h
0x18
Logical Sectors Written
E1h
0x28
Logical Sectors Read
F2h
0x08
Num Reported Uncorrectable
Errors
BBh
0x10
Num Resets Between Command
Acceptance and Completion
-
0x08
Num Hardware Resets
-
0x10
Num ASR Events
-
0x18
Num Interface CRC Errors
-
0x08
Percentage Used Endurance
Indicator
E9h
0x07 - Solid State
Device Statistics
5.5
This statistic counts up from 0 rather than
down from 100, and may go beyond 100 for
drives that exceed their expected lifetime.
Software Settings Preservation
Intel SSD 535 Series supports the SET FEATURES parameter to enable/disable the preservation of software
settings. The following table lists the software setting that will be preserved across a COMRESET.
Table 18:
Preserved Software Settings
Feature
Preserved Settings
Advanced Power Management
Enabled or Disabled
Multiple Mode
Block size from the last set multiple mode
NCQ Streaming commands
processing
WDNC bit and RDNC bit states
Password Attempt Counter
Password Attempt Counter value
Read look-ahead
Enabled or Disabled
Read/Write Stream Error Logs
Log contents
Reverting to defaults mode
Enabled or disabled
Sanitize Device
Whether device is in the Sanitize Frozen state
Security
Current Security state
Standby Timer
Standby Timer setting
Transfer Mode
DMA and UDMA transfer mode settings
Volatile Write Cache
Enabled or Disabled
Write-Read Verify
Write-Read-Verify feature set settings. Device shall not return to factory
default Write-Read-Verify settings after a COMRESET
April 2015
332175-002US
Product Specification
23
Intel® Solid-State Drive 535 Series (M.2)
5.6
DevSleep
Intel SSD 535 Series supports the DevSleep feature. DevSleep must be enabled on the device by the
host system through the SET FEATURES command. If DevSleep is enabled by the host, the host must drive
the DevSleep signal to proper assert/de-assert voltage levels according to the SATA specification. Entry into
DevSleep must be preceded by LPM slumber entry by host and device. The Intel SSD 535 Series also supports
DevSleep_to_ReducedPwrState which allows the host to wake the drive using normal LPM COMWAKE
out-of-band signaling.
For the Intel SSD 535 Series, the recommended total time to DevSleep for system active state is 6 sec.
The AHCI* controller has 4 parameters used to define proper DevSleep operation between the host and drive.
The following table provides those recommended values for the Intel SSD 535 Series drive.
Table 19:
DevSleep Control Parameters
Parameter
Definition
DevSleep Idle Time Out – number of
milliseconds prior to host asserting
DevSleep
DITO
DITO Multiplier – set once at boot-up
Minimum DevSleep Assertion Time –
minimum time in milliseconds for
host to assert DevSleep
DevSleep Exit Time Out – max time in
milliseconds from when DevSleep is
negated to when device ready to
detect OOB
DM
MDAT
DETO
Control
Recommended
Settings
Set by Host
Active (lid-up): 375
Set by Host
15
Reported by Drive
10
Reported by Drive
20
Total time to DevSleep entry = DITO * (DM+1)
5.7
SMART Command Transport
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive status and
data from an SSD using standard write/read commands to manipulate two SMART Logs:
 Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
 Log Address E1h ("SCT Data Transfer") — used to transport data
Product Specification
24
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
5.8
SMART Attributes
The following two tables list the SMART attributes supported by the Intel SSD 535 Series, and the corresponding
status flags and threshold settings.
Table 20:
SMART Attributes
Status Flags
ID
Attribute
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
1
10
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count).
05h
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
09h
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
Power Cycle Count
0Ch
AAh
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
Available Reserved Space
Program Fail Count
ABh
The raw value of this attribute shows total
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
Erase Fail Count
ACh
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
Unexpected Power Loss
AEh
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
April 2015
332175-002US
Product Specification
25
Intel® Solid-State Drive 535 Series (M.2)
Status Flags
ID
B7h
Attribute
SATA Downshift Count
The count of the number of times SATA
interface selected lower signaling rate due
to error.
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0
1
1
0
0
1
1
90
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
1
10
End-to-End Error Detection Count
B8h
Reports number of errors encountered during endto-end error detection within the SSD data path.
Uncorrectable Error Count
BBh
BEh
C0h
C7h
The raw value shows the count of errors that could
not be recovered using Error
Correction Code (ECC).
Temperature
Reports real-time temperature of drive as
measured by temperature sensor on drive PCB. The
normalized value reports the current temperature
value. The raw value shows current, lifetime highest
and lifetime lowest temperatures. Byte 1:0 = current
temp Celsius; Byte 3:2 = lifetime highest temp
Celsius; Byte 5:4 = lifetime lowest temp Celsius.
Power-Off Retract Count (Unsafe Shutdown Count)
The raw value of this attribute reports the
cumulative number of unsafe (unclean) shutdown
events over the life of the device. An unsafe
shutdown occurs whenever the device is powered
off without STANDBY IMMEDIATE being the last
command.
CRC Error Count
The total number of encountered SATA interface
cyclic redundancy check (CRC) errors.
Host Writes
E1h
The raw value of this attribute reports the total
number of sectors written by the host system. The
raw value is increased by 1 for every 65,536 sectors
(32MB) written by the host.
Timed Workload Media Wear
E2h
Measures the wear seen by the SSD (since reset of
the workload timer, attribute E4h), as a percentage
of the maximum rated cycles.
Timed Workload Host Read/Write Ratio
E3h
E4h
Shows the percentage of I/O operations that are
read operations (since reset of the workload timer,
attribute E4h).
Timed Workload Timer
Measures the elapsed time (number of minutes
since starting this workload timer).
Available Reserved Space
E8h
This attribute reports the number of reserve blocks
remaining. The normalized value begins at 100
(64h), which corresponds to 100 percent availability
of the reserved space. The threshold value for this
attribute is 10 percent availability.
Product Specification
26
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Status Flags
ID
Attribute
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
Media Wearout Indicator
This attribute reports the number of cycles the
NAND media has undergone. The normalized value
declines linearly from 100 to 1 as the average erase
cycle count increases from 0 to the maximum rated
cycles. Once the normalized value reaches 1, the
number will not decrease, although it is likely that
significant additional wear can be put on the device
Total LBAs Written
E9h
The raw value of this attribute reports the total
number of sectors written by the host system. The
raw value is increased by 1 for every 65,536 sectors
(32MB) written by the host.
Total LBAs Read
F1h
The raw value of this attribute reports the total
number of sectors read by the host system. The raw
value is increased by 1 for every 65,536 sectors
(32MB) read by the host.
Total NAND Writes
F2h
F9h
Raw value reports the number of writes to NAND in
1 GB increments.
Table 21:
SMART Attribute Status Flags
Status Flag
Description
Value = 0
Value = 1
SP
Self-preserving attribute
Not a self-preserving attribute
Self-preserving attribute
EC
Event count attribute
Not an event count attribute
Event count attribute
ER
Error rate attribute
Not an error rate attribute
Error rate attribute
PE
Performance attribute
Not a performance attribute
Performance attribute
OC
Online collection attribute
Collected only during offline
activity
Collected during both offline
and online activity
PW
Pre-fail warranty attribute
Advisory
Pre-fail
5.9
SMART Logs
Intel SSD 535 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h.
The Intel SSD 535 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write scratchpads,
where the default value is zero (0). Intel SSD 535 Series does not write any specific values to these logs unless
directed by the host through the appropriate commands.
The Intel SSD 535 Series also implements a device vendor specific log at address A9h as a read-only log area with
a default value of zero (0).
April 2015
332175-002US
Product Specification
27
Intel® Solid-State Drive 535 Series (M.2)
6
Certifications and Declarations
The following table describes the Device Certifications supported by the Intel SSD 535 Series.
Table 22:
Device Certifications and Declarations
Certification
CE* Compliant
UL* Certified
Description
European Economic Area (EEA): Compliance with the essential requirements of EC Council
Directives Low Voltage Directive (LVD) 2006/95/EC, EMC Directive 2004/108/EC and Directive
2011/65/EU.
Certified Underwriters Laboratories, Inc. Bi-National Component Recognition; UL 60950-1, 2nd
Edition, 2007-03-27 (Information Technology Equipment - Safety - Part 1: General
Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology Equipment - Safety Part 1: General Requirements)
C-Tick* Compliant
Compliance with the Australia/New Zealand Standard AS/NZS3548 and Electromagnetic
Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).
BSMI* Compliant
Compliance to the Taiwan EMC standard CNS 13438: Information technology equipment - Radio
disturbance Characteristics - limits and methods of measurement, as amended on June 1, 2006,
is harmonized with CISPR 22: 2005.04.
KCC*
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility Control
Regulation and meets the Electromagnetic Compatibility (EMC) Framework requirements of the
Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.
Microsoft WHCK*
Microsoft Windows Hardware Certification Kit
RoHS* Compliant
Restriction of Hazardous Substance Directive
VCCI*
Voluntary Control Council for Interface to cope with disturbance problems caused by personal
computers or facsimile.
SATA-IO*
Indicates certified logo program from Serial ATA International Organization.
Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final
product. Intel components as well as purchased components on the finished assembly meet JS709 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements. The replacement
of halogenated flame retardants and/or PVC may not be better for the environment.
Product Specification
28
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
7
Appendix
7.1
Identify Device
The table below describes the sector data returned from an identify device command
Table 23:
Identify Device Returned Sector Data
Word
F = Fixed
V = Variable
X = Both
Default Value
0
F
0040h
General configuration bit-significant information
1
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
2
V
C837h
Specific configuration
3
X
0010h
Obsolete - Number of logical heads (16)
4-5
X
0h
6
X
003Fh
7-8
V
0h
Reserved for assignment by the CompactFlash* Association (CFA)
9
X
0h
Retired
10-19
F
varies
20-21
X
0h
Retired
22
X
0h
Obsolete
23-26
F
varies
Firmware revision (8 ASCII characters)
27-46
F
varies
Model number (Intel Solid-State Drive)
47
F
8010h
7:0—Maximum number of sectors transferred per interrupt on
multiple commands
48
F
4000h
Reserved
49
F
2F00h
Capabilities
50
F
4000h
Capabilities
51-52
X
0h
53
F
0007h
Words 88 and 70:64 valid
54
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
55
X
0010h
Obsolete - Number of logical heads (16)
56
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
57-58
X
00FBFC10h
April 2015
332175-002US
Description
Retired
Obsolete - Number of logical sectors per logical track (63)
Serial number (20 ASCII characters)
Obsolete
Obsolete
Product Specification
29
Intel® Solid-State Drive 535 Series (M.2)
Word
F = Fixed
V = Variable
X = Both
Default Value
Description
59
V
B110h
Number of sectors transferred per interrupt on multiple commands
60-61
F
varies
Total number of user-addressable sectors
62
X
0h
63
F
0007h
Multi-word DMA modes supported/selected
64
F
0003h
PIO modes supported
65
F
0078h
Minimum multiword DMA transfer cycle time per word
66
F
0078h
Manufacturer’s recommended multiword DMA transfer cycle time
67
F
0078h
Minimum PIO transfer cycle time without flow control
68
F
0078h
Minimum PIO transfer cycle time with IORDY flow control
69
F
4010h
Additional Supported
70
F
0h
Reserved
71-74
F
0h
Reserved for IDENTIFY PACKET DEVICE command
75
F
001Fh
Queue depth
76
F
070Eh
Serial ATA capabilities
77
F
0086h
Reserved for future Serial ATA definition
78
F
014Ch
Serial ATA features supported
79
V
0044h
Serial ATA features enabled
80
F
07FCh
Major version number
81
F
FFFFh
Minor version number
82
F
746Bh
Command set supported
83
F
7429h
Command sets supported
84
F
6163h
Command set/feature supported extension
85
V
7469h
Command set/feature enabled
86
V
B409h
Command set/feature enabled
87
V
6163h
Command set/feature default
88
V
407Fh
Ultra DMA Modes
89
F
0002h
Time required for security erase unit completion
90
F
0001h
Time required for enhanced security erase completion
91
V
00FEh
Current advanced power management value
92
V
FFFEh
Master Password Revision Code
Product Specification
30
Obsolete
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
Word
F = Fixed
V = Variable
X = Both
Default Value
93
F
0h
Hardware reset result: the contents of bits (12:0) of this word shall
change only during the execution of a hardware reset
94
V
0h
Vendor’s recommended and actual acoustic management value
95
F
0h
Stream minimum request size
96
V
0h
Streaming transfer time - DMA
97
V
0h
Streaming access latency - DMA and PIO
98-99
F
0h
Streaming performance granularity
100-103
V
varies
104
V
0h
105
F
0001h
Reserved
106
F
4000h
Physical sector size / logical sector size
107
F
0h
108-111
F
varies
112-115
F
0h
Reserved for world wide name extension to 128 bits
116
V
0h
Reserved for technical report
117-118
F
0h
Words per logical sector
119
F
401Ch
Supported settings
120
F
401Ch
Command set/feature enabled/supported
121-126
F
0h
Reserved
127
F
0h
Removable Media Status Notification feature set support
128
V
0021h
Security status
129-159
X
varies
Vendor-specific
160
F
0h
CompactFlash Association (CFA) power mode 1
161-168
X
0h
Reserved for assignment by the CFA
169
X
0001h
170-173
F
0h
Additional Product Identifier
174-175
F
0h
Reserved
176-205
V
0h
Current media serial number
206
X
0025h
207-208
X
0h
209
X
4000h
April 2015
332175-002US
Description
Maximum user LBA for 48-bit address feature set
Streaming transfer time - PIO
Inter-seek delay for ISO-7779 acoustic testing in microseconds
Unique ID
Data set management Trim attribute support
SCT Command Transport
Reserved
Alignment of logical blocks within a physical block
Product Specification
31
Intel® Solid-State Drive 535 Series (M.2)
Word
F = Fixed
V = Variable
X = Both
Default Value
210-211
X
0h
Write-Read-Verify Sector Count Mode 3 (DWord)
212-213
X
0h
Write-Read-Verify Sector Count Mode 2 (DWord)
214
X
0h
NV Cache Capabilities
215-216
X
0h
NV Cache Size in Logical Blocks (DWord)
217
X
0001h
218
X
0h
Reserved
219
X
0h
NV Cache Options
220
X
0h
Write-Read-Verify feature set
221
X
0h
Reserved
222
X
10FFh
Transport major version number
223
X
0h
Transport minor version number
224-229
X
0h
Reserved
230-233
X
0h
Extended Number of User Addressable Sectors (QWord)
234
X
0002h
Minimum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
235
X
0400h
Maximum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
236-254
X
0h
255
X
varies
Description
Nominal media rotation rate
Reserved
Integrity word
Note:
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values may change
when media is removed or changed.
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the device or the
commands executed by the device.
X = F or V. The content of the word may be fixed or variable.
Product Specification
32
April 2015
332175-002US
Intel® Solid-State Drive 535 Series (M.2)
7.2
Models
The following table lists the available M.2 models of the Intel SSD 535 Series.
Table 24:
April 2015
332175-002US
Available Models
Model String
Capacity
SSDSCKJW120H6
120GB
SSDSCKJW180H6
180GB
SSDSCKJW240H6
240GB
SSDSCKJW360H6
360GB
Product Specification
33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement