Документация keithley
Cables
ACCESSORIES
Side
Cables
Text
TERMINATIONS
LENGTH
Model
Description
Type
From
To
m
ft
USE WITH:
236-ILC-3
Safety Interlock
Shielded twisted pair
3-pin round
3-pin round
3
10
237-ALG-2
Low Noise Input
Triax
3-slot male triax
Alligator clips (3)
2
6.6
237, 4200-SCS, 8007, 8008
237, 486, 487, Series 2200, Series 2600A,
4200-PA, 6220, 6221, 6487, 6514, 6517A, 6517B
237-ALG-15
Low Noise Input
Triax
3-slot male triax
Alligator clips (3)
15
50
248-MHV
248-SHV
2000-MTC-2
2000-MTCD-2
2600-ALG-2
2651A-KIT-1
2651A-KIT-2
2651A-KIT-3
2107-4
2107-30
2107-50
3720-MTC-1.5
High Voltage
High Voltage
Cable Assembly
Cable Assembly
Low Noise Input
Cable Assembly
Cable Assembly
Cable Assembly
Input Cable
Input Cable
Input Cable
Mass Terminated Assembly
Coax
Coax
Shielded twisted pair
Shielded multiple conductors
Triax
Coax
Coax
Coax
Shielded twisted pair
Shielded twisted pair
Shielded twisted pair
Twisted pair
SHV female
SHV female
DB44 female
DB44 female
3-slot male triax
2-pin plug
2-pin plug
2-pin plug
LEMO
LEMO
LEMO
D-sub female
MHV male
SHV female
Unterminated
DB50 male
Alligator clips (3)
2-pin plug
2-pin plug
2-pin plug
Copper spade lugs (4)
Copper spade lugs (4)
Copper spade lugs (4)
78-pin D-sub male
3
3
2
2
2
1
2
3
1.2
9.1
15
1.5
10
10
6.6
6.6
6.6
3.3
6.6
10
4
30
50
5
3720-MTC-3
3721-MTC-1.5
3721-MTC-3
3722-MTC-1.5
3722-MTC-1.5/MM
3722-MTC-3
3722-MTC-3/MM
3732-MTC-1.5
3732-MTC-3
4200-MTRX-1
4200-MTRX-2
4200-MTRX-3
4200-PRB-C
4200-RPC-0.3
4200-RPC-2
4200-RPC-3
4200-RPC-6
4200-TRX-0.3
4200-TRX-1
4200-TRX-2
4200-TRX-3
4801
4802-10
4803
6011
6011-10
6517-ILC-3
6517B-ILC-3
7009-5
7011-MTC-1
7011-MTC-2
7019C-MTC-1
7019C-MTCI-2
7020-MTC-2
7024-3
7024-10
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Ultra Low Noise
Ultra Low Noise
Ultra Low Noise
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Ultra Low Noise
Ultra Low Noise
Ultra Low Noise
Ultra Low Noise
Low Noise Input
Low Noise Input
Low Noise Cable Kit
Input Leads
Input Leads
4-pin Interlock Cable
Interlock Cable
Shielded RS-232
Mass Terminated Assembly
Mass Terminated Assembly
Kelvin Extender Cable
Kelvin Instrument Cable
Mass Terminated Assembly
Low Noise
Low Noise
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
SMU triax
SMU triax
SMU triax
Y adapter cable
Remote PreAmp
Remote PreAmp
Remote PreAmp
Remote PreAmp
PreAmp triax
PreAmp triax
PreAmp triax
PreAmp triax
Coax
Coax
Coax
Triax
Triax
Shielded
Shielded
Shielded
Twisted pair (45)
Twisted pair (45)
Shielded twisted pair
Shielded twisted pair
Twisted pair (45)
Triax
Triax
D-sub female
D-sub female
D-sub female
D-sub male
D-sub male
D-sub male
D-sub male
D-sub female
D-sub female
Miniature male
Miniature male
Miniature male
Female SMA
DB15
DB15
DB15
DB15
3-slot male
3-slot male
3-slot male
3-slot male
Male BNC
Male BNC
Male BNC (10)
2-slot male triax
2-slot male triax
4-pin female DIN
4-pin Phoenix
Male DB-9
96-pin female
96-pin female
Card connector
Card connector
96-pin female
2-slot male triax
2-slot male triax
78-pin D-sub male
50-pin D-sub male
50-pin D-sub male
104-pin D-sub female
104-pin D-sub male
104-pin D-sub female
104-pin D-sub male
78-pin D-sub male
78-pin D-sub male
3-slot male
3-slot male
3-slot male
2 female SSMC
DB15
DB15
DB15
DB15
3-slot male
3-slot male
3-slot male
3-slot male
Male BNC
Unterminated
Female BNC (5)
Alligator clips (3)
Alligator clips (3)
4-pin female DIN
4-pin DIN
Female DB-9
96-pin female
96-pin female
DUT cables (6)
Shielded banana plug cables (6)
96-pin female
2-slot male triax
2-slot male triax
3
1.5
3
1.5
1.5
3
3
1.5
3
1
2
3
10
5
10
5
5
10
10
5
10
3.2
6.5
9.8
7025-10
Low Noise Input
Triax
2-slot male triax
Unterminated
3
10
Instruments with 2-slot triax connectors
7035-MTC-2
7036-MTC-2
7051-*
7075-MTC
7076-CMTC
7076-RMTC
Mass Terminated Assembly
Mass Terminated Assembly
BNC Interconnect
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Twisted pair (45)
Twisted pair (45)
Coax
Round ribbon
Shielded
Shielded
96-pin female
96-pin female
BNC
25-pin D female
25-pin D female
25-pin D female
96-pin female
96-pin female
BNC
25-pin D female
25-pin D female
25-pin D female
2
2
6.6
6.6
3
3
3
10
10
10
7035
7036
776, 2015, 2016, 3321, 3322, 3390, 7062, 7063
7075 bank/column
7075 bank
7075 row
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
0.3
2
3
6
0.3
1
2
3
1.2
3
15.2
1.5
3
1
1
1.5
1
2
2
2
2
0.9
3
M E A S U R E
237, 486, 487, Series 2200, Series 2600A,
4200-PA, 6220, 6221, 6487, 6514, 6517A, 6517B
248
248, CS-970
2000-20
2000-SCAN-20
2635A, 2636A, 4200-PA
2651A, 8011
2651A, 8011
2651A, 8011
2182A
2182A, Series 2200
2182A, Series 2200
3720, 3723, 3724
3720, 3723, 3724
3721, 3730, 3731, 3740, 3750
3721, 3730, 3731, 3740, 3750
3722
3722
3722
3722
3732
3732
4200-SCS
4200-SCS
4200-SCS
4200-PIV, 4210-CVU
1
4200-PA
6.5 4200-PA
9.8 4200-PA
19.6 4200-PA
1ft 4200-PA
3.2 4200-PA
6.5 4200-PA
9.8 4200-PA
4
6485, 7158
10 6485, 7158
50 6485, 7158
5
Instruments with 2-slot triax connectors
10 Instruments with 2-slot triax connectors
3.3 6517A, 8009
3.3 6517B, 8009
5
All RS-232 capable instruments
3.3 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, 7037
6.6 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, 7037
6.6 7019-C
6.6 7019-C, Series 2400
6.6 7020
3
Instruments with 2-slot triax connectors
10 Instruments with 2-slot triax connectors
O F
C O N F I D E N C E
Cables
LENGTH
Description
Type
From
To
m
ft
7078-DIN
7078-MTC-5
7078-MTC-20
8-cable Set (includes 4
BNC-to-triax adapters)
707A Master/Slave
Mass Terminated Assembly
Mass Terminated Assembly
Triax (4)
Coax (4)
Twisted pair (9)
Twisted pair (12)
Twisted pair (12)
3-slot triax (4)
BNC (4)
8-pin DIN
38-pin connector
38-pin connector
3-slot triax (4)
BNC (4)
8-pin DIN
38-pin connector
38-pin connector
3
3
1.8
1.5
6.1
10
10
6
5
20
7078-TRX-1
Low Noise
Triax
3-slot male triax
3-slot male triax
0.3
1
7078-TRX-3
Low Noise
Triax
3-slot male triax
3-slot male triax
0.9
3
7078-TRX-5
Low Noise
Triax
3-slot male triax
3-slot male triax
1.5
5
7078-TRX-10
Low Noise
Triax
3-slot male triax
3-slot male triax
3
10
7078-TRX-12
Low Noise
Triax
3-slot male triax
3-slot male triax
4
12
7078-TRX-20
Low Noise
Triax
3-slot male triax
3-slot male triax
6.1
20
7078-TRX-6IN
7152-MTC-2
7152-MTC-10
7152-TRX-10
7153-TRX
7173-50-CSEP
7705-MTC-2
7711-BNC-SMA
7712-SMA-1
7754-3
8007-GND-3
8007-MTC-3
Low Noise
Low Noise Matrix Expansion
Low Noise Matrix Expansion
Low Noise M-Series to Triax
Low Noise M-Series to Triax
4-cable Set
Mass Terminated Assembly
5 SMA to BNC Cables
SMA Cables
BNC
Safety Ground Wire
Mass Terminated Assembly
Triax
Triax (5)
Triax (5)
Triax (5)
Triax (5)
Coax
Twisted pair (25)
Coax
Coax
Coax
Single wire
Triax
3-slot male triax
6-pin M-series coax
6-pin M-series coax
M-series connector
M-series connector
SMB female
D-sub male
SMA Male
SMA Male
BNC Male
Crimp lug
M-series connector
0.15
0.6
3
3
2
0.6
2
0.15
1
0.9
3
3
0.5
2
10
10
6
2
6.6
0.5
3.3
3
10
10
8542-301
LIV Cable
Multiple conductor
DB9 female
1.8
6
8607
CA-18-1
CA-19-2
CA-126-1
1kV Test Cables
Shielded
RG58
Digital I/O
Single wire (2)
Coax
RG58
Shielded
Safety banana
Dual banana plug
BNC male
DB25 male
3-slot triax
6-pin M-series coax
6-pin M-series coax
3-slot triax (5)
3-slot triax (5)
BNC male
D-sub female
BNC Female
SMA Male
Alligator clips
Crimp lug
3-slot triax (12)
Multiple terminations: Triax
(2500), 2 dual bananas (24XX)
GND wire
Safety banana
Dual banana plug
BNC male
DB25 female
1
1.2
1.5
1.5
3.3
4
5
5
CA-180-3A
Crossover cable
Twisted pair
RJ45
RJ45
3
10
CA-321-1
Temperature Control Cable
Multiple conductor
DB15 female
1.8
6
2510, 8542, 8544
1.8
6
2510, 8542, 8544, 8544-TEC
Multiple conductor
DB15 female
CA-404B
CA-405B
CA-406B
CA-446A
CA-447A
CA-451A
CA-452A
CA-557-1
CA-557-2
CA-557-3
CA-558-2
S46-SMA-0.5
S46-SMA-1
SC-9
SC-22
SC-93
SC-182
SC-200
Dual Temperature Control
Cable
RG188
RG188
RG188
Cable Assembly
Cable Assembly
RG188
RG188
Cable Assembly
Cable Assembly
Cable Assembly
Interlock Cable
SMA Cable
SMA Cable
Low Noise
Low Noise
Low Thermal
Low Inductance
General Purpose
Coax
Coax
Coax
Coax
Coax
Coax
Coax
Multiple conductor
Multiple conductor
Multiple conductor
Twisted pair (2)
Coax
Coax
Coax
Triax
Shielded
Coax
Shielded twisted pair
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
8-pin receptacle
8-pin receptacle
8-pin receptacle
25-pin D-sub
SMA Male
SMA Male
Unterminated
Unterminated
Unterminated
Unterminated
Unterminated
8-position Phoenix
(CS-846 equivalent)
Y cable to two 8-position Phoenix
(CS-846)
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
8-pin receptacle
8-pin receptacle
8-pin receptacle
3-pin
SMA Male
SMA Male
Unterminated
Unterminated
Unterminated
Unterminated
Unterminated
USB-B-1
USB Cable
Coax
USB Type A
USB Type B
1
3.3
USB-B-3
USB Cable
Coax
USB Type A
USB Type B
3
10
CA-322-1
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
USE WITH:
7072 to HP-4145
707A
7071, 7071-4, 7074-D
7071, 7071-4, 7074-D
237, 2635A, 2636A, 6487, 6514,
6517A, 6517B, 7072, 7174A
237, 2635A, 2636A, 6487, 6514,
6517A, 6517B, 7072, 7174A
237, 2635A, 2636A, 6487, 6514,
6517A, 6517B, 7072, 7174A
237, 2635A, 2636A, 6487, 6514,
6517A, 6517B, 7072, 7174A
237, 2635A, 2636A, 6487, 6514,
6517A, 6517B, 7072, 7174A
237, 2635A, 2636A, 6487, 6514,
6517A, 6517B, 7072, 7174A
6430
7152
7152
7152, 8006
7153
7173-50
7703, 7705, 7707, 7709
7711
7116-MWS, 7711, 7712, System 41, System 46, System 46T
Instruments with 2-slot BNC connectors
8007
8007, 7072
2500, Series 2400, System 25, 8542, 8544, 8544-TEC
2410, 6487, 6517A, 6517B
Binding post inputs
4200-SCS
213, Series 2600A, Series 3700, Series 3700A
Series 2600A, 2701, 3390, Series 3700, Series
3700A , 6221, all TSP-enabled instruments
2
6.5
0.15
0.5
0.33
1.08
3
9.8
1.5
5
0.108 0.35
0.204 0.67
1
3.3
2
6.6
3
10
1
3.3
0.15
0.5
0.30
1.0
Sold by the foot
Sold by the foot
Sold by the foot
Sold by the foot
Sold by the inch
M E A S U R E
O F
Side
Cables
Text
7078-CSHP
4200-SCS
4200-SCS
4200-SCS
4210-CVU
4210-CVU
4200-SCS
4200-SCS
2651A, 8011
2651A, 8011
2651A, 8011
Series 2600A
7116-MWS, 7711, 7712, System 41, System 46, System 46T
7116-MWS, 7711, 7712, System 41, System 46, System 46T
CS-631
2182-KIT
2302, 2303, 2303-PJ, 2304A, 2306, 2306-PJ
Series 2600A
2100, Series 2200, 3390, Series 3700,
Series 3700A, KUSB-3100 Series
2100, 3390, Series 3700, Series 3700A,
KUSB-3100 Series
C O N F I D E N C E
ACCESSORIES
TERMINATIONS
Model
Side
Cables
Text
Cables
Model 236-ILC-3 Safety Interlock Cable:
Designed to connect the lid interlock circuit of
the Models 8007 and 8008 test fixtures to the
interlock circuit of the Model 237 SMU and 486
and 487 Picoammeters.
Model 248-SHV: 3m (10 ft) of RG-8A/U coax
cable terminated with a SHV female connector
on both ends. Maximum operating voltage (rms)
is 5,000V.
For use with: 248 and CS-970
For use with: 237, 4200-SCS, 8007, 8008
Model 2107-* Low-Thermal Input Cables with
Spade Lugs: An input cable terminated with a
LEMO connector on one end and four copper
spade lugs on the other.
2107-4 1.2m (4 ft) length
2107-30 9.1m (30 ft) length
2107-50 15m (50 ft) length
For use with: 2182A, Series 2200
Model 237-ALG-*: Low noise triax cable (SC-22)
terminated with a 3-slot male triax connector on
one end and 3 alligator clips on the other.
237-ALG-2 2m (6.6 ft) length
237-ALG-15 15m (50 ft) length
Model 2000-MTC-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that is
designed to mate with the 2000-20 scanner card.
The other end is unterminated for direct connection to measurement fixtures or devices.
Model 2600-ALG-2: 2m (6.6 ft) cable terminated
with a 3-slot male triax connector on one end
and 3 alligator clips on the other.
For use with: 2000-20
ACCESSORIES
For use with: 237, 486, 487, Series 2200,
Series 2600A, 4200-PA, 6220, 6221, 6487,
6514, 6517A, 6517B
Model 248-MHV: 3m (10 ft) of RG-8A/U coax
cable terminated with a SHV female connector on one end and a MHV male connector on
the other. Maximum operating voltage (rms)
is 5,000V.
For use with: 248
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
For use with: 2635A, 2636A, 4200-PA
Model 2000-MTCD-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that
is designed to mate with the 2000-SCAN-20
scanner card. The other end is equipped with a
50-pin D-sub male connector.
For use with: 2000-SCAN-20
Model 2651A-KIT-*: High current, low impedance, coaxial cable assembly.
2651A-KIT-1: 1m (3.3 ft).
2651A-KIT-2: 2m (6.6 ft).
2651A-KIT-3: 3m (10 ft).
For use with: 2651A, 8011
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Cables
4200-MTRX-2: 2m (6.5 ft) (two included with
each 4200-SCS SMU not configured with a
4200-PA Remote PreAmp)
4200-MTRX-3: 3m (9.8 ft)
For use with: 4200-SCS
Model 3721-MTC-*: 50-pin D-sub female to
50-pin D-sub male cable.
3721-MTC-1.5: 1.5m (5 ft) length
3721-MTC-3: 3m (10 ft) length
For use with: 3721, 3730, 3731, 3740, 3750
Model 3722-MTC-*: 104-pin D-sub male to
104-pin D-sub female cable.
3722-MTC-1.5: 1.5m (5 ft) length
3722-MTC-3: 3m (10 ft) length
For use with: 3722
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
For use with: 3722
Model 3732-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3732-MTC-1.5: 1.5m (5 ft) length
3732-MTC-3: 3m (10 ft) length
Model 4200-PRB-C: SMA to SSMC Y adapter
cable with local ground that connects the
4200-PIV package to DC probe manipulators.
The cable is terminated at one end with a single
female SMA. The other end splits into two
gold SSMC plugs (female connectors) and a
black wire with integrated connector, which is
used to connect to the shield of another Model
4200-PRB-C cable.
Side
Cables
Text
For use with: 3720, 3723, 3724
Model 3722-MTC-*/MM: 104-pin D-sub male to
104-pin D-sub male cable.
3722-MTC-1.5/MM: 1.5m (5 ft) length
3722-MTC-3/MM: 3m (10 ft) length
For use with: 4200-PIV, 4210-CVU
For use with: 3732
Model 4200-MTRX-*: Ultra low noise SMU triax
cable is terminated with a miniature male triax
connector on one end and a standard 3-slot
male triax connector on the other end. This
cable connects a Model 4200-SMU or 4210-SMU
source measurement unit installed in a Model
4200-SCS to a test fixture. (4200-MTRX-* cables
are intended only for connection to an SMU that
does not have a 4200-PA PreAmp installed.)
4200-MTRX-1: 1m (3.2 ft)
A
G R E A T E R
Model 4200-RPC-*: Remote PreAmp cable
terminated at each end with a high density
DB15 connector. This cable connects a Model
4200-SMU or 4210-SMU source measurement
unit installed in a Model 4200-SCS to a remotely
mounted Model 4200-PA PreAmp.
4200-RPC-0.3: 0.3m (1 ft) (for use inside prober
shield)
4200-RPC-2: 2m (6.5 ft) (one included with each
4200-PA)
4200-RPC-3: 3m (9.8 ft)
4200-RPC-6: 6m (19.6 ft)
For use with: 4200-PA
M E A S U R E
O F
C O N F I D E N C E
ACCESSORIES
Model 3720-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3720-MTC-1.5: 1.5m (5 ft) length
3720-MTC-3: 3m (10 ft) length
Side
Cables
Text
Cables
Model 4200-TRX-*: Ultra low noise PreAmp
triax cable terminated with a standard 3-slot
male triax connector on each end. This cable
connects a Model 4200-PA PreAmp option
installed in the Model 4200-SCS to the
test fixture.
4200-TRX-0.3: 0.3m (1 ft) (recommended for
remote location of the 4200-PA)
4200-TRX-1: 1m (3.2 ft)
4200-TRX-2: 2m (6.5 ft) (two included with each
Model 4200-PA)
4200-TRX-3: 3m (9.8 ft)
Model 4802-10: 3m (10 ft) of low noise coax
cable with male BNC connector at one end and
unterminated at the other.
2 Slot Triax
Model 6011 2-slot Triax Cable: 1.5m (5 ft) of
triax cable (SC-22) terminated with a 2-slot triax
plug on one end and three alligator clips on the
other. Also available in 3m (10 ft) length (Model
6011-10).
For use with: 6485, 7158
For use with instruments with 2-slot triax
connectors
For use with: 4200-PA
Model 4803 Low Noise Cable Kit: Includes
15m (50 ft) of low noise coax cable, 10 male BNC
connectors, and 5 female BNC chassis-mount
connectors.
For use with: 6485, 7158
Model 6517-ILC-3 Interlock Cable: Designed to
connect the Interlock of the 6517A with the 8009
test fixture. Configuring the 6517A with the 8009
test fixture results in all the electrode constants
already being programmed into the unit.
For use with: 6517A Electrometer, 8009
Model 4801 Input Cable: Low noise coax cable,
1.2m (48 in) in length, with male BNC connectors on each end.
ACCESSORIES
For use with: 6485, 7158
Model 6517B-ILC-3 Interlock Cable: Designed
to connect the interlock of the 6517B with the
8009 test fixture. Configuring the 6517B with the
8009 test fixture results in all the electrode constants already being programmed into the unit.
For use with: 6517B Electrometer, 8009
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Model 7009-5 Shielded RS-232 Cable: 1.5m
(5 ft) RS-232 cable with a male DB-9 connector
at one end and a female DB-9 connector on the
other end. Wired as a straight through, not as a
null modem cable.
Model 7019C-MTC-1 Kelvin Extender Cable:
2m (6.6 ft) extension cable set for the Model
7019-C 6-wire Ohms Matrix Card. Provides
cabling to the DUT and is used for matrix
expansion.
For use with: 7019-C
Model 7020-MTC-2: 2m (6.6 ft) mass terminated
cable assembly for connection to 7020. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
Side
Cables
Text
Cables
For use with: 7020
For use with: All RS-232 capable instruments
2 Slot Triax
Model 7019C-MTCI-2 6-wire Kelvin Extender
and Instrument Cable: Used with Model
7019-C 6-Wire Ohms Matrix Card and a
SourceMeter instrument. The SourceMeter
cables are 0.6m (2 ft) long and the DUT cables
are 2m (6.6 ft) long. The cable set is used in a
basic system to test a resistor network.
For use with instruments with 2-slot triax
connectors
For use with: 7019-C, Series 2400
SourceMeter Instruments
For use with: 7011-C, 7012-C, 7013-C, 7015-C,
7018-C, 7021, 7022, 7037
2 Slot Triax
Model 7025-10 2-slot Triax Cable: 3m (10 ft)
low noise triax input cable (SC-22) terminated
on one end with 2-slot male triax connector.
For use with instruments with 2-slot triax
connectors
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
ACCESSORIES
Model 7011-MTC-1: 1m (3.3 ft) mass terminated
cable assembly for connection to 7011-C and
other switching cards. The cable has 45 pairs
with outer shield. The cable is terminated at
each end with 96-pin female DIN connectors
with strain relief. Also available in 2m (6.6 ft)
length (Model 7011-MTC-2).
Model 7024-* 2-slot Triax Cable: Low noise
triax cable (SC-22) with 2-slot male triax connectors on each end.
7024-3 0.9m (3 ft)
7024-10 3m (10 ft)
Side
Cables
Text
Cables
Model 7035-MTC-2: 2m (6.6 ft) mass terminated
cable assembly for connection to 7035. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7035
Model 7051-*: General purpose BNC to BNC
cable (G-58C).
7051-2 0.6m (2 ft)
7051-5 1.5m (5 ft)
7051-10 3m (10 ft)
For use with: 776, 2015, 2016, 3321, 3322,
3390, 7062, 7063, 7711, some instrument
external trigger I/O lines
Model 7076-CMTC: High isolation 3m (10 ft)
cable assembly with mass terminated connector
on each end. For bank connections on the 7075
or column connections on the 7076. A separate
guard shields each HI signal path. The number
of cables required depends on how the 7075 or
7076 is configured.
For use with: 7075 Bank
Model 7036-MTC-2: 2m (6.6 ft) mass terminated
cable assembly for connection to 7036. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7036
Model 7075-MTC: 3m (10 ft) cable assembly
with mass terminated connector on each end.
For use as row or column connections on the
7076, and for bank or column connections
on the 7075. The number of cable assemblies
required depends on how the 7075 or 7076 is
configured.
Model 7076-RMTC: High isolation 3m (10 ft)
cable assembly with mass terminated connector
on each end. For use as row connections on the
7075 and 7076. A separate guard shields each
HI signal path. The number of cable assemblies
required depends on how the 7075 or 7076 is
configured.
For use with: 7075 Row
ACCESSORIES
For use with: 7075 Bank/Column
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Cables
Model 7078-CSHP is a set of eight 3m (10
ft) cables and four BNC-to-triax adapters for
connecting between the Model 7072 8×12
Semiconductor Matrix Card and an HP-4145
Semiconductor Parameter Analyzer. Four 3-slot
triax cables connect to Source/Measure Unit
outputs. Four BNC-to-BNC coax cables adapt
the measurement and source modules in the
HP-4145 to the connectors of 7072.
For use with: 7072 to HP-4145
Model 7078-MTC-5: 1.5m (5 ft) mass terminated
cable for connection to column inputs (7071 and
7071-4). Also used for matrix expansion (7071,
7071-4, or 7074). The cable has 12 sets of shielded
twisted pair wires for isolation of critical circuits
and noise rejection in the system. The cable is terminated at each end in a 38-pin connector block
with strain relief. Model 7078-MTC-20 can be
used as is or cut in half to make two 10 ft cables.
For use with: 707A
For use with: 6430
For use with: 7071, 7071-4, 7074-D
3 Slot Triax
Model 7078-DIN: This 1.8m (6 ft) cable accessory connects between Model 707A mainframes
when operated as one unit in Master/Slave
mode. One cable is required for each mainframe.
Model 7078-TRX-6IN 3-slot Triax Cable: 0.15m
(6 inch), 3-slot, low-noise, guarded triax cable that
minimizes leakage current and input capacitance
when used with the Model 6430 Remote PreAmp
(lower noise than 1 foot or longer versions).
Model 7078-TRX-* 3-slot Triax Cables: Low
noise triax cables terminated at both ends in
3-slot male triax connectors.
7078-TRX-1 0.3m (1 ft)
7078-TRX-3 0.9m (3 ft)
7078-TRX-5 1.5m (5 ft)
7078-TRX-10 3.0m (10 ft)
7078-TRX-12 3.5m (12 ft)
7078-TRX-20 6.0m (20 ft)
Model 7152-MTC-*: Five low noise triax cables
terminated in 6-position M-series coax connector blocks. Provides quick connection between
7152 matrix cards and is compatible with Model
7152-MTR connector. Also available in 3m (10 ft)
length for connection between the matrix and
the device under test.
7152-MTC-2 0.6m (2 ft)
7152-MTC-10 3.0m (10 ft)
For use with: 7152
A
G R E A T E R
M E A S U R E
ACCESSORIES
For use with: 237, 2635A, 2636A, 6220, 6221,
6487, 6514, 6517A, 6517B, 7072, 7174A
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
Side
Cables
Text
3 Slot Triax
O F
C O N F I D E N C E
Side
Cables
Text
Cables
Model 7152-TRX-10: Set of five 3m (10 ft) low
noise triax cables terminated at one end in a
single M-series connector block and at the other
end in 3-slot triax connectors. This cable is most
useful for direct connection to electrometers
and Source/Measure Units.
For use with: 7152, 8006
Model 7173-50-CSEP: The 7173-50-CSEP cable
set provides the capability to expand a switching
configuration to include more than one 7173-50.
Each set contains four 0.6m (25 in) cables. One
cable is required to expand each row or column
connection between adjacent cards. For example, using two 7173-50 cards to create a 4×24
matrix would require connecting the rows of
two adjacent cards together. One 7173-50-CSEP
set has enough cables to do this. Connecting the
12 columns together on two adjacent cards creates an 8×12 matrix. This would require three
7173-50-CSEP sets, 12 cables.
Model 7707-MTC-2: 2m (6.6 ft) 25-conductor
male to female D-sub cable assembly.
For use with: 7701, 7707, 7709
For use with: 7173-50
Model 7711-BNC-SMA: Male SMA to female
BNC cables (5 each), 0.15m (0.5 ft) in length.
For use with: 7711
Model 7153-TRX: 2m (6.6 ft) low noise cable
assembly with M-series connector at one end for
row or column connections to the 7153, and five
3-slot male triax connectors at the other end.
Two 7153-TRX cable assemblies are required to
make all connections to the 7153 card.
Model 7705-MTC-2: 2m (6.6 ft) 50-conductor
male to female D-sub cable assembly.
For use with: 7703, 7705, 7707, 7709, 7701
Model 7712-SMA-1: SMA cable, male to male,
1m (3.3 ft).
For use with: 7153
ACCESSORIES
For use with: 7116-MWS, 7711, 7712, System
41, System 46, System 46T
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Cables
Model 8542-301: 1.8m (6 ft) LIV test system
cable.
For use with instruments with 2-slot BNC
connections
For use with: 4200-SCS
For use with: Series 2400, 2500, System 25,
8542, 8544, 8544-TEC
Side
Cables
Text
Model 7754-3 BNC to Alligator Cable: 0.9m
(3 ft) terminated on one end with a BNC plug
and on the other with two alligator clips.
Model CA-19-2: 1.5m (5 ft) RG58 cable terminated with a BNC male plug on each end.
Item shipped may
vary from model
pictured here.
CA-126-1 Digital I/O Cable: 1.5m (5 ft) of cable,
from DB25 male to DB25 female.
For use with: 213, Series 2600A, Series 3700,
Series 3700A
Model 8007-GND-3: Safety ground wire, 3m
(10 ft).
For use with: 8007
Model 8607 1kV Source Banana Cable Set:
The 8607 cable set is made up of one red and
one black high voltage test lead with fixed safety
banana plug ends. The leads are 1 meter (3.3 ft)
long and have a voltage rating of 1500V DC.
For use with: 2410, 6487, 6517A, 6517B
CA-180-3A: 3m (10 ft), CAT5 crossover cable for
Ethernet or TSP-Link.
For use with: Series 2600A, 2701, 3390,
Series 3700, Series 3700A, 6221, all TSP-Link
enabled instruments
For use with: 8007, 7072
Item shipped may vary from
model pictured here.
CA-18-1: 1.2m (4 ft) shielded cable terminated
with a dual banana plug on each end. For use
with binding post inputs or dual banana jacks.
For use with: Binding post inputs
CA-321-1: Temperature control cable.
For use with: 2510, 8542, 8544
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
ACCESSORIES
Model 8007-MTC-3: Mass terminated cable
assembly, 3m (10 ft).
Cables
Side
Cables
Text
CA-322-1: Dual temperature control cable.
For use with: 2510, 8542, 8544, 8544-TEC
CA-404B: 2m (6.5 ft) RG188 coax cable terminated with an SMA male plug on each end, 50Ω
impedance.
For use with: 4200-SCS, System 46,
System 46T
CA-406B: 33cm (13 in) RG188 coax cable terminated with an SMA male plug on each end, 50Ω
impedance.
CA-451A: 10.8cm (4.25 in) RG188 coax cable
terminated with an SMA male plug on each, 50Ω
impedance.
For use with: 4200-SCS
For use with: 4200-SCS
CA-446A: 3m (9.8 ft) coax cable terminated
with an SMA male plug on each end, 100Ω
impedance.
CA-452A: 20.4cm (8 in) RG188 coax cable terminated with an SMA male plug on each end, 50Ω
impedance.
For use with: 4200-SCS
For use with: 4210-CVU
CA-405B: 15cm (6 in) RG188 coax cable terminated with an SMA male plug on each end, 50Ω
impedance.
ACCESSORIES
For use with: 4200-SCS
CA-447A: 1.5m (4.9 ft) coax cable terminated
with an SMA male plug on each end, 100Ω
impedance.
For use with: 4210-CVU
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
CA-557-*: 8-pin male to 8-pin male cable assembly with straight through pin configuration.
CA-557-1: 1m (3.3 ft)
CA-557-2: 2m (6.6 ft)
CA-557-3: 3m (10 ft)
For use with: 2601A, 2602A, 2611A, 2612A,
2651A SourceMeter® Instruments
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
Cables
CA-558-2: 25-pin D-sub to 3-pin interlock cable
assembly.
SC-182: Low inductance (42nH/ft) coaxial cable
for minimizing test lead impedance in circuits
using fast transient response power supplies.
The cable is sold by the foot and comes without
connectors.
For use with: Any Series 26xxA SourceMeter®
Instrument
SC-22: Low noise triax cable without connectors
(sold by the foot).
Side
Cables
Text
SC-9: Low noise coax cable without connectors
(sold by the foot).
For use with: 2302, 2303, 2303-PJ, 2304A,
2306, 2306-PJ, 2306-VS
For use with: CS-631
S46-SMA-0.5: SMA cable, male to male, 0.15m
(0.5 ft).
For use with: 7116-MWS, 7711, 7712, System
41, System 46, System 46T
SC-93: Low thermal, 2-conductor shielded cable,
#22AWG solid copper (sold by the foot).
For use with: 2182-KIT
SC-200: Shielded twisted pair cable (sold by
the inch). Recommended for general-purpose
use with Series 2600A System SourceMeter
instruments.
For use with: Series 2600A
For use with: 7116-MWS, 7711, 7712, System
41, System 46, System 46T
USB-B-*: USB cable, Type A to Type B.
USB-B-1: 1m (3.3 ft).
USB-B-3: 3m (10 ft).
For use with: 2100, Series 2200, 3390, Series
3700, Series 3700A, Series KUSB-3100
1.888.KEITHLEY (U.S. only)
w w w.keithley.com
A
G R E A T E R
M E A S U R E
O F
C O N F I D E N C E
ACCESSORIES
S46-SMA-1: SMA cable, male to male, 0.3m (1 ft).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement