1.103.200
Data sheet
Drive inserts for El-O-Matic actuators
Sheet No.: 1.103.200 Rev. B
Date: January 2012
Standard available
insert shapes
Insert mounting
acc. ISO 5211
Insert mounting
acc. DIN 3337
Ø P2
Ø P1
Ø P2
Ø P1
sq
Max.
D
Max.
Drive inserts can be supplied on factory built actuators or as loose items and are easily replaceable at
distributor or end user level.
M1 M2
Where direct mounts are not possible, for instance on valves with exposed grand packing,
the use of inserts often simplifies the design of the mounting kit.
Material :
Finish:
Centering
plate
D
Max.
Dim.
in mm
E25
ISO5211
DIN3337
11
11
14
14
9
10
-
10
12
-
M1
M2
P1
P2
34.5
14.1
-
34.5
18.1
-
Sq max.
D max.
11
13.8
16
21
www.El-O-matic.com
Description
Most of the El-O-Matic actuators are fitted with drive inserts. This enables actuators to be directly
mounted onto suitable valves and eliminates the need for a bracket and coupling type mounting kit.
The use of direct mounts significantly cuts the cost of the valve/actuator assembly.
Standard actuators are fitted with square drive inserts in accordance with ISO 5211 (or DIN 3337), but
a wide variety of other inserts are also available. Special inserts may have oversize
or undersize squares, double-D and shaft key way forms.
Optional available
insert shapes
M1 M2
Inserts with inner-square-dimensions per actuator type
E40 / E65 E100
E150
E200
E350
E600
E950
Standard inserts dimensions
19
19
22
27
17
17
22
22
E1600
27
27
36
36
46
46
Optional insert dimensions
12
14
14
14
14
16
16
16
16
22
17
17
24
19
19
27
24
24
Maximum insert dimensions
34.5
50
50
50
27
37
37
23.1
28.5
32.1
32.1
25.2
36.2
36.2
14
16
17
19
24
22
-
-
52
36.5
-
64
48.5
-
82
60.5
-
19
23.6
27
33.6
36
45
46
60
27
33.6
27
33.6
27
33.6
E
Aluminium alloy
Anodised
The following actuator types do not have inserts.
-E12,
- P2500 and P4000
- 180° actuators
These actuators have inner square directly in the bottom of the pinion.
See the following data sheets for more information :
E12
ISO5211 1.103.102
DIN 3337 1.103.103
P2500/P4000 DIN 3337 1.103.073
ISO 5211 1.103.106
180°
DIN 3337 1.203.011
ISO 5211 1.203.021
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement