Model:
VIS200DX-2
Colour High Resolution
Vandal Dome Camera
Before you begin
•
Please unpack the box carefully and identify that all the parts are present.
•
The camera must be positioned so that it will not point directly into the sun (sunrise and
•
Avoid viewing areas where half the area is in bright sunlight and the other half is dark,
•
Do not cut the camera cables, this will void the warranty.
•
Make sure you use only the recommended power supply. Damage caused to the camera by
Shown with the chameleon cover
Colour High Resolution
Vandal Dome Camera
1. Package Contents
1 2 3
1.Instruction
Manual
2. VIS200DX-2
Dome Camera
3. Chameleon Cover
2
2. Product Description
THANK YOU VERY MUCH FOR PURCHASING OUR PRODUCT
The VIS200DX-2 Colour Vandal Dome camera is designed for medium to high risk applications and is able to withstand a blow from a 10 pound sledgehammer. It offers very high resolution 480 TVL images from its Sony 1/3" Super HAD CCD and has a high quality wide angle lens. It will provide images in light levels as low as 0.1 lux. The camera is designed for internal or external use and wall or ceiling mounting.
3. Features
•
Very High Resolution CCD sensor provides great quality Colour images in light levels of 0.1 lux and above
•
Sony 1/3" Super HAD CCD image sensor for 500 TVL resolution images
•
Discreet styling for unobtrusive low profile use, includes paintable chameleon cover
•
Tamper and Vandal Resistant, can withstand a blow from a 10 pound sledgehammer
•
3-Axis mechanism for flexible wall or ceiling mounting
•
Xvision IXC1 Digital Signal Processing (DSP) chip which has been optimised for internal viewing and features Automatic Gain Control,
Auto White Balance, Automatic Electronic Iris, Back Light Compensation,
Low Smear, Edge Enhancement and Zero Colour Rolling
•
3.6mm focus free Electronic Iris lens with 78° viewing angle lens for super sharp images and easy selection of the optimum viewing angle during installation
3
4. Installation
1. Select a suitable position on the wall or ceiling to install the camera.
2. Rotate the dome cover by unscrewing it counterclockwise to remove it from the camera base.
3. Secure the camera in the desired position with the three fixing screws
(as shown in Figure 1).
Figure 1
4
4. Adjust the camera viewing angle by first tilting (STEP 1) then rotating the camera module (STEP 2), and then turn the horizontal adjustment ring (STEP 3) to correct the image and achieve the required orientation (as shown in
Figure 2).
Top Rotate Top
Camera
Module
To p
Ti lt
Horizontal
Adjustment
Ring
Rotate
Figure 2
5. Place the dome cover on the camera and tighten it by turning it clockwise.
5. Dipswitch Setting
DIP Switches on the Camera Board
5.1 AES Function- The AES (Automatic Electronic Shutter) function controls the brightness of the camera image, it should always be in the AES position.
5.2 BLC Function- The BLC (Back Light Compensation) function makes objects in front of a bright scene (such as a window on a bright sunny day) clearer to see by increasing their brightness and making the background darker. To turn on the BLC function flick the dipswitch to the BLC position, to turn it off, flick the dipswitch to the OFF position.
5.3 AGC Function- For better performance in low light conditions the
AGC (Automatic Gain Control) can be increased from the standard 16db to 26db. This has the effect of making the picture brighter (however it may also add more noise to the picture, as it is amplifying all aspects of the video signal). To increase the AGC flick the dipswitch to the AGC position, to turn leave it as normal, flick the dipswitch to the OFF position.
5.4 Flickerless Function- The flickerless function is designed to improve the images and colour balance when using the cameras where Fluorescent Lighting is present. To turn on the flickerless function flick the dipswitch to the F.L. position, to turn it off, flick the dipswitch to the OFF position.
5
6. Using the Chameleon Cover
1. Simply place the chameleon cover over the dome and press down until your hear it click (as shown in Figure 3).
2. The chameleon cover can be painted to match the decor of any interior without affecting the warranty of the camera.
Figure 3
7. Connection
1. Connect the video output (Yellow BNC Connector) to a monitor or other video device through a 75 Ohms type coaxial cable.
2. To connect the power source, insert the DC Power plug into the DC Jack (Red) on the camera’s trailing lead.
(as shown in Figure 4).
Figure 4
8. Specifications
Model:
Picture Type:
VIS200DX-2
Colour
Image Sensor:
DSP:
Resolution:
Lens Viewing Angle:
Infra Red Nightvision:
Minimum Illumination:
Audio:
Operating Voltage:
Sony 1/3” Super HAD CCD
Xvision IXC1
480 TVL
78° (92° Diagonal)
No
0.1 Lux
No
12V DC 150mA
Suggested Power Supply: 12V DC 300mA Regulated
Mounting: Wall/Ceiling
Weatherproofing:
Dimensions (ØxD):
Yes
110x70mm
7
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 2 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
8
Manufactured exclusively for Xvision - www.x-vision.co.uk
Europe
Unit 2, Valley Point,
Beddington Farm Road,
Croydon, Surrey
CR0 4WP
United Kingdom
Middle East
Burjuman Tower,
18th Floor
PO Box 121828
Dubai 43659
United Arab Emirates
Far East
Kyoung Am Building
157-27 Samsung-dong
Kangnam-ku
135 090 Seoul
Korea
North America
100 Park Avenue
New York City,
New York
10017
United States
