Congatec COM Express conga-B915 User manual

Congatec COM Express conga-B915 User manual
Computer-On-Modules
2009
© 2009 congatec AG. All rights reserved.
conga, congatec and XTX™ are registered trademarks of congatec AG. Intel, Pentium and Intel Atom are trademarks of Intel Corporation in the U.S. and other countries. COM Express is a registered trademark
of PICMG. Express Card is a registered trademark of the Personnel Computer Memory Card international Association (PCMCIA). PCI express is a registered trademark of the Peripheral Component Interconnect
Special Interest Group (PCISIG). CompactFlash is a registered trademark of the Compact Flash Association. Winbond is a registered trademark of the Winbond Electronics corps. AVR is a registered trademark of
the Atmel corporation. ETX is a registered trademark of Kontron Embedded Modules GmbH. AMICORE8 is a registered trademark of American Megatrends inc. Microsoft®, Windows®, Windows NT®, Windows CE
and Windows XP® are registered trademarks of Microsoft corporation. VxWorks is a registered trademark of WindRiver. All product names and logos are property of the respective manufacturers.
All data is for information purposes only. Although all the information contained within this document is carefully checked no guarantee of correctness is implied or expressed.
2
congatec
About congatec
congatec International
6
Technology
6
7
8
9
10
Computer-On-Modules
ACPI Battery Management
Embedded BIOS
Embedded Panel Interface - EPI
Cooling Solutions
11
11
12
13
Qseven™
Concept
conga-QA
Engineering Tools
15
16
18
19
20
21
22
23
24
25
26
30
30
31
32
33
34
35
36
37
38
42
Concept
Product Overview
conga-BM45
conga-B945
conga-BA945
conga-CA945
conga-B915
conga-CA
conga-CAx
conga-CLX
Engineering Tools
XTX™
Concept
Product Overview
conga-X965
conga-X945
conga-XA945
conga-X915
conga-X855
conga-XLX
Engineering Tools
ETX®
Concept
Product Overview
conga-E855
conga-ELX
conga-ELXeco
Engineering Tools
XTX / ETX
42
43
44
45
46
47
COM Express™
Technology
4
5
15
Qseven
congatec AG
COM Express
4
3
w w w.congatec.com
About congatec
About congatec AG
Module Know How
Design-In Support
congatec AG is an experienced company
serving the quickly growing embedded computer technology market. Our product portfolio
is comprised of embedded computer boards
& modules with BIOS features for industrial use,
professional board support packages and extensive design-in support. Embedded computers are
our passion. It’s our goal to establish long-term
partnerships with our customers so that we can
meet your ever-demanding needs.
The congatec engineering team is committed
to the embedded module technology from the
very beginning of this industry. This vast amount
of knowledge and experience translates directly
into superior hardware, software and support for
our customers.
congatec realizes how important it is in an
embedded module system that both the customer’s carrier board and the embedded PC
work together perfectly. The congatec team is
committed to giving the best design-in support
to our customers.
Software and Driver Support
System Integration
congatec offers advanced Board-SupportPackages, which include both the latest tested
drivers from silicon vendors and the congatec
specific drivers for accessing all of our additional
embedded module features.
When designing a system special attention must
be paid to issues such as heat dissipation and
electrostatic/electromagnetic compatibility. By
using our products you gain access to congatec
experience, which will help you deal with these
issues.
Economical Principal
Our products and technologies offer innovative
solutions for industrial uses of embedded computer technology. We strive to make high-tech
world standards economically viable. Although
we offer full functionality, the customer has the
ability to utilize only those functions that are necessary for their application.
Quality
congatec AG is certified in compliance with
ISO9001. All congatec products are made to
meet the highest quality standards. All our
manufacturers are also ISO9001 certified.
Display Technology
Due to the fact that flat panel manufacturers
don’t follow a uniform specification, special
adaptation know how is necessary. Automatic
Panel Detection via EPI (Embedded Panel
Interface based on VESA EDID™ 1.3) can detect
and configure most flat panels available on the
market today.
BIOS Expertise
When it comes to Embedded computing often
the difference between one company’s product
and another’s is the BIOS. congatec has many
years of experience in BIOS development.
The congatec Embedded BIOS expands the
functionality of a standard BIOS allowing for our
products to be implemented into many industrial
uses.
Lifecycle Support
Today it is obvious that product attention not only
starts with the first prototypes but also must be
maintained throughout series production. In
addition to this congatec is offering life cycle
support during our product’s lifetime. This means
we will offer replacement modules, when applicable, and quick and efficient handling of repairs
during the life cycle of our products. congatec
will also pay close attention to component life
cycles in order to provide our customers with
advanced end-of-life warnings for our products.
Focussing on core competencies
Embedded computers are congatec’s passion.
We exclusively develop embedded computer
modules. With this focus, and thanks to the many
years experience of our employees, we have
achieved a very high degree of specialization.
This knowledge is there for you to make use of
and to strengthen your application know-how in
your industry.
EN ISO 9001: 2000
4
congatec
congatec AG International
 Sales Partner
 Technology Partner
Technology
 congatec







Qseven



 
 

 







 








XTX / ETX

Find more details at: www.congatec.com/partner.html
5
COM Express

w w w.congatec.com
Computer-On-Modules - the concept
Embedded computer modules are highly integrated single board computers particularly suited for
implementing customized solutions. Embedded computer modules are used when standard single board
computers are not suitable for mechanical reasons or due to a lack of expandability.
The difference between boards and
modules
Embedded computer modules are very small
computer boards that can be integrated in
almost every application without a cable
connection. Every signal is transmitted via small,
densely packed board-to-board industrial connectors to a customer- or application-specific
carrier board. This carrier board contains all the
hardware expansions and also allows the cable
less distribution of the required interfaces.
Computer boards are equipped with numerous
and various connectors in order to allow the
connection of a variety of peripherals and
expansions. Complex solutions based on computer boards require many cable connections,
which is frequently a cause of problems during
tough industrial use.
Customer specific solution
The carrier board contains all the special
functionalities required by the corresponding
embedded application. This could be special
interfaces, a unique power supply, as well as the
mechanical design and the slot placement. The
embedded computer module itself is plugged in
like a component. This ”component” represents a
complete computer that is the intelligence of the
application.
Cooling
The heatspreader serves as a thermal interface
between the embedded computer module and
the cooling solution of the system.
Thus, e. g. the excess heat can be
passed directly to the system
housing. The heatspreader is
defined in the COM specification
and is uniformly implemented
for all modules.
Flexible and robust
mechanical solutions
In comparison to most computer
boards, modules are very small
and allow for very compact solutions.
Because the modules are firmly screwed
down, solutions are possible even for the
most difficult environmental conditions.
Economical
By avoiding expensive and sensitive cable
connections, solutions based on embedded
computer modules are already economical in
mid-sized quantities.
Scalability
congatec currently offers modules from 500 MHz
to 2.53 GHz. However, not only is the computer
performance scalable, but also the interface
configuration. You get precisely the performance
your application needs.
Long-term availability
The excellent long-term availability of all
congatec modules is further extended as a result
of the clearly defined module interface enabling
broad market offers.
Minimized development risk
The complexity of carrier board development is
significantly reduced when embedded computer
modules are used. With lower complexity, the
probability of error is naturally lower as well. This
means the cost and time frame of the project
can be met with a significantly lower risk.
Time-to-market
With a module-based solution, a complex CPUboard design with accompanying BIOS development is not necessary. Modular solutions are
therefore ready for market significantly faster.
To accelerate the time-to-market even further,
congatec offers starter kits. With this, hardware
and software development can get under way
immediately. Appropriate board-support packages for all standard operating systems provide
an additional head start.
6
Application
OS
ACPI CGOS
CMB
congatec
Board
Controller
SBM²
5V, 12 V DC
Smart
Battery
Manager
Module
Control
I²C
SMART
Battery
#1
SMART
Battery
#2
..
..
19V DC
System
Power
Supply
AC
congatec
conga - SBM²
ready to use Smart Battery Manager Module
XTX / ETX
System Host
Carrier board
By following our CMB interface specification,
customers can implement their own battery
solutions or obtain a fully tested battery system
from congatec AG.
In combination with an ACPI operating system,
the battery functionality associated with mobile
platforms is supported by congatec embedded
computers.
Now it‘s much easier to build mobile embedded applications that have notebook battery
functionality.
Qseven
The congatec ACPI BIOS and board controller
are designed to support a CMB (Control Method
Battery) sub-system.
The board controller interacts with the battery
solution by providing the congatec ACPI BIOS
with all the required battery information.
Since all congatec designs are equipped with
the board controller, the entire Qseven™, XTX
and COM Express™ product family range supports ACPI Battery Management.
COM Express
ACPI Battery Management
Technology
ACPI Battery Management
7
w w w.congatec.com
congatec Embedded BIOS
Embedded computer users usually require more than the standard functionality of an office computer. We at
congatec have taken these requirements into account when designing our BIOS functionality. By drawing on the
wealth of information that has been gathered as a result of many man-power years of combined experience in
BIOS development, we have implemented the special requirements of an embedded BIOS into the congatec
BIOS.
ACPI Support
BIOS Setup Data Backup
Hardware Monitoring
Power Management and System Configuration
is supported by the congatec BIOS according to
the ACPI specification.
The BIOS CMOS settings are held in flash memory
to allow battery-less applications.
Multi Stage Watchdog Timer
The congatec embedded BIOS allows the customer to store their own defaults in flash memory.
This helps reduce the need for customized BIOS
versions.
The congatec BIOS already has the routines to
monitor critical components implemented. Fans,
operating voltages and several temperature
sensors can be monitored without incurring additional development costs.
All congatec modules
are equipped with a
multi stage watchdog
timer supporting different events such as NMI,
hardware reset or power
button. It can either assert a single event and/
or any combination of
these events. Triggering
can happen by software
and/or external OEM
hardware.
Watchdog Events
NMI
Reset
Power
Button
ACPI
Event
NMI
Routine
Hardware
Reset
Switch
ON/Off
Shutdown
or Reset
Customer specific CMOS Defaults
Manufacturing Data Storage
No Trigger
ACPI
Event
No Trigger
Multi Stage
Hardware
Reset
The congatec board controller provides a
rich data set of manufacturing and board information: Serial Number, Article Number, EAN
Code, Manufacturing and Repair Date, System
Statistics and more. The BIOS also keeps track
of dynamically changing running time and
boot count data. All this data is accessible by
a uniform API.
congatec Board Controller
User Data Storage Area
An onboard µc fully isolates some of the embedded features such as system monitoring or the
I²C bus from the x86 core architecture, which
results in higher embedded feature performance
and more reliability.
congatec modules provide 32 Bytes of non volatile storage in the EEPROM and a 64 kByte block
in the BIOS flash memory.
Fast Mode I²C Bus
The I²C Bus is a low speed bus interface often
used for sensors, converters or data storage in
embedded applications. All congatec modules
offer a 400 kHz multi-master I²C Bus that provides
maximum I²C bandwidth.
Customer Logo
The BIOS can display a custom logo instead of
the traditional diagnostic output during POST. With
the congatec embedded BIOS customers can
now integrate an OEM logo into the standard
BIOS by themselves.
Flexible BIOS Expansion
Customer specific code can be executed while
booting the system. During power on self test
(POST) the congatec BIOS can give control to
customer specific code. This gives customers
more flexibility to initialize special hardware
extensions.
32 Bit Uniform OS API
The congatec embedded BIOS Features are accessible through a uniform 32 Bit API.
congatec System Utility
All Embedded BIOS features are accessible
through the use of a congatec Windows tool.
This includes all manufacturing and statistical
information; e.g. serial number, running hours,
boot counter etc. BIOS default settings, bootlogo
and flat panel configurations can easily be programmed using this flexible and powerful tool.
Board Support Packages
congatec offers advanced BSPs, which include
both the latest tested drivers from silicon vendors
and the congatec specific drivers for accessing all of our additional embedded BIOS and
module features.
8
congatec
Technology
Embedded Panel Interface EPI
Qseven
The congatec system utility enables users
to easily generate an EPI dataset.
9
Display Properties
Computer On Module
XTX, ETX, COM Express, Qseven
I²C Device
EPI
Display Data
Display
Power Sequencing
Power
Brightness
COM Express
With this tool the EPI data set can be created
and written to a reserved area in the congatec
embedded BIOS. The EPI data set description
is independent from the video controller and is
interpreted by the video BIOS of the COM in order
to set the correct video attributes. The result is a
manufacturer independent “plug-and-display”
solution that enables free interchangeability of
displays and COM‘s.
Display Subsystem
Carrier board
with customized functionality
Power Supply
Further Details: www.epi-standard.org
w w w.congatec.com
XTX / ETX
This problem is now solved with the use of Embedded Panel Interface EPI. EPI is based on
the VESA standard EDID 1.3 and defines the
software format for display properties and the
scalable hardware interface.
An EPI data set, used to describe the control of
a flat panel display, can be easily created using
the information found in the display‘s datasheet.
It‘s even easier when using congatec‘s system
utility.
Embedded Computer
Backlight
One of the biggest advantages of COM‘s
(Computer On Modules) is the interchangeability
of modules between different suppliers. The only
weak point was the direct control of flat panel
displays. Due to the lack of a uniform standard all
manufacturers had to define their own interface
strategy.
With EDID 1.3 only monitors with local intelligence
can be operated. In order for an Embedded
Computer Module to have direct control of a flat
panel display some more information is required.
Therefore, EPI adds the missing parameters to the
complete set of EDID 1.3 data.
Flip
The Embedded Panel Interface EPI, an open
standard, allows for easy and direct control of all
flat panel displays with maximum interchangeability.
Rotate
EPI Flat Panel Support
Cooling Solution
Heatspreader
The specifications for Qseven™, COM Express™, XTX™ and ETX® embedded computer modules include
a heatspreader, which is a mechanical definition of the thermal interface. All the heat generated by
components such as chipsets and processors is transferred to the system’s cooling via the heatspreader.
This can be achieved by either a thermal connection to the casing, a heat pipe or a heat sink.
Active and passive standard cooling solutions
Compared with sandwich-type constructions for heatspreaders and cooling systems, active and passive cooling solutions remove one layer from
the process. The heatspreader and cooler are manufactured as one unit,
which enables them to provide faster thermal conduction. For an active
cooling solution, a high performance quiet fan has been integrated
within the cooling fins.
active cooling solution
passive cooling solution
Thermal simulation
of an active cooling solution
Thermal Stacks
The “thermal stacks” can also be used separately without a heatspreader. It is distinguished from a
heatspreader by its lack of a thermal conductive surface. This also reduces differences in temperature. The disadvantage here is its slightly more complex construction. When using heatspreaders, the
customer receives a premounted heatspreader (thermal stack + aluminum plate). The heatspreader
only has to be attached to the COM via screws. The customer has the entire heatspreader surface
available as a connector to a cooling solution. With thermal stacks the customer needs to plan the
mounting of the thermal stacks and the connection to the COM and cooling solution.
10
congatec
Qseven™ - the mobile COM definition
Targeting next generation ultra mobile embedded processors built using 45 nm technology, the Qseven™ format
complements the low power and small size of these processors. By exploiting the small form factor of the
Technology
industry`s latest processors, the Qseven™ format offers high performance computing power, delivered in a module measuring only 70 x 70 mm2.
This slot is already being used for graphics cards
in laptop computers, so it is capable of the high
speed PEG (PCI Express Graphics) data transfers.
This MXM slot connector is produced by three
manufacturers in two different heights and there
is also an inverted model available.
SDIO
PCI Express
When utilizing the SDIO interfaces, rugged and
cheap SD-Cards can be used as bulk memory.
Qseven™ defines an 8 Bit SDIO interface that is
capable of a maximum data transfer rate of 52
MByte/s. The Secure Digital standard also enables
other applications such as WLAN, Bluetooth, RFID
etc. while using the same card format.
Qseven™ offers up to 4 PCI Express™ x1 lanes.
This allows the customer to equip their embedded PC application with the next generation of
PC performance. PCI Express™ is a serial interface with maximum bandwidth of 2.5 GBit/s per
lane and direction.
Connector
Qseven™ is defined for a maximum power consumption of 12 Watt operated by a single 5 Volt
DC power and provides all additional signals for
battery management. This simple power requirements allow for small mobile solutions powered
by compact two cell batteries.
Legacy free
Qseven™ is a legacy free standard and only
focused on high speed serial interfaces.
Compact Size
Unlike most previous module standards, Qseven™
does not require an expensive board-to-board
connector. Instead, it utilizes a very affordable
MXM card slot with 230 pins in a 0.5 mm configuration.
11
Low Power
Software API
Qseven™ embedded computer modules are
equipped with additional functions for industrial
applications such as Watchdog Timer, I²C Bus,
LCD brightness control, BIOS user storage area
and the reading of system temperatures. Due to
the fact that no standardized software interface
for these functions has been defined to date, the
exchangeability of COMs can be more difficult
than expected. In order to generally avoid the
software modifications that such situations would
require, the Qseven™ specification includes a
consistent software API (Application Program
Interface). Qseven™ modules from different
manufacturers can thus be easily exchanged
without modifications to hardware or software.
™
ExpressCard™
Qseven feature set
w w w.congatec.com
COM Express
The module's dimensions are 70x70mm² only.
This means it can be easily integrated into size
constricted systems.
The video interfaces have been designed with
increased flexibility. A total of four different output
possibilities are defined. Direct control of a flat
panel display via 2x24 Bit LVDS (Low Voltage
Differential Signal) with DisplayID and EPI panel
detection. The physical signals the SDVO port
are shared with DisplayPort and TDMS. A hot
plug mechanism detects what type of interface
is used and configures the graphics controller
accordingly.
Qseven
Graphics Interfaces
XTX / ETX
Mobile Applications
Qseven™ is unlike previous Computer-On-Modules (COM) standards due to its primary focus
being directed towards mobile and ultra mobile
applications. It defines fast serial differential
interfaces such as PCI Express and Serial ATA but
omits support for legacy interfaces like EIDE and
PCI in order to provide ideal support for today as
well as future CPU's and chipsets.
conga-QA
Module for ultra mobile
applications
Ultra Mobile
Ultra compact Qseven™ module based on Intel® Atom™ Processor Z5xx
Formfactor
Qseven Form Factor, 70x70 mm2
Lowest power consumption
CPU
Fast serial differential interfaces
for high data bandwidth
Intel® Atom™ processor Z530 1.6 GHz, 533 MHz FSB and memory bus speed, 512k L2 cache, 45 nm,
with Hyper-Threading Technology
Intel® Atom™ processor Z510 1.1 GHz, 400 MHz FSB and memory bus speed, 512k L2 cache, 45 nm
DRAM
Up to 1 GByte on-board DDR2 memory with 400/533 MT/s
Chipset
Intel® SCH US15W
Ethernet
Gigabit Ethernet Realtek RTL8111
I/O Interfaces
8x USB 2.0, 1x SATA, 1x SDIO, 1x PCIe, I²C Bus, 1x USB client
Mass Storage
On-board ATA Solid State Drive up to 4 GByte (optional)
Sound
Intel® High Definition Audio (Intel® HD Audio)
Graphics
Intel® Graphics Media Accelerator 500 (Intel® GMA 500), up to 256 MByte frame buffer supporting Direct X 9.0E and Open GL 2.0
Video Decode Acceleration
Full hardware acceleration for MPEG2, MPEG4, H.264, WMV9 and VC1
Motion Video Support
Single channel 112MHz LVDS transmitter, support for flat panels with 1x18 and
1x24 bit data mapping up to resolutions of 1366x768 pixel
Single channel SDVO interface, supports resolutions up to 1280x1024 pixel
Dual independent display support
congatec Board Controller
Multi Stage Watchdog, non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup, Data Backup, I²C bus (fast mode, 400 kHz, multi-master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, Display Auto Detection, Backlight Control, Flash Update, based on AMIBIOS8®
Power Management
ACPI 3.0 compliant, Smart Battery Management
Operating Systems
Windows® XP, Windows® XP embedded, Windows® CE 6.0, LINUX, QNX
Power Consumption
Typ. application ~5 Watt @ 5V
Temperature
Operating: 0 to +60°C
Storage: -20 to +80°C, extended temperature versions in preparation
Humidity
Operating: 10 to 90% r. H. non cond.
Storage: 5 to 95% r. H. non cond.
Size
70 x 70 mm2 (2¾" x 2¾")
Original size (70 x70 mm2, 2¾" x 2¾")
12
conga-QKIT
conga-QEVAL
This complete kit provides the ability to start evaluating
Evaluation Board for Qseven™ modules.
Qseven™ modules immediately.
To achieve a quick start with Qseven congatec offers an
Contents:
evaluation carrier board, which routes all the Qseven™
congatec
Qseven
Technology
Qseven™ - Engineering Tools
conga-FPA1 evaluation flat panel adapter
SATA-to-CF card adapter
SATA-to-IDE converter
ATX power supply
Complete cable set
congatec USB memory stick
Product documentation and BSPs are available at:
www.congatec.com
13
4x PCI Express x1, 1x ExpressCard, 1x Mini PCI Express Card,
1x SDIO Card Socket, 4x 32 Bit PCI
Gigabit Ethernet
6x USB 2.0 + 1x USB Client
MIC, Line In, Line Out, SPDIF
I²C EEPROM, Aux. signals for battery management
1x Dual Channel LVDS, 1x SDVO, HDMI or Display Port,
Backlight control
12 V single power input
ATX power input connector, CMOS battery
2x SATA
LPC POST code display, System speaker
Power button, Reset button, LID button, Sleep button
XTX / ETX
conga-LDVI LVDS to DVI converter
COM Express
signals to standard interface connectors.
conga-QEVAL evaluation carrier board
PCI Express switch, External BIOS flash
w w w.congatec.com
Qseven™ - Engineering Tools
Qseven™ Mobility Kit
The congatec Qseven™ mobility kit provides the ability to
start evaluating Qseven™ modules for all kind of mobile
applications immediately.
Contents:
Qseven™ mini carrier board 95x140mm²
19V DC power supply
Flat panel LVDS adapter with USB touch controller
and LED backlight control
conga-LDVI
DVI Converter Module for LVDS
Compact module to convert LVDS to DVI-D. It can be
used with either XTX™ or COM Express™ modules. It`s now
possible to realize a dual port DVI-D system independent
of the typical Video Output Ports (SDVO or DVO).
5,7" TFT LVDS display with installed touch panel
and LED backlight
HDMI-to-DVI adapter
conga-SBM2Q battery manager
Smart battery
conga-SBM 2Q
conga-SBM Q is a complete battery manager sub-system
Qseven™ mini carrier board
Full Feature Set. The conga-Qcarrier is a full featured,
miniaturized carrier board for Qseven™.
2
in the form of a plug-in module.
Small size: 95x140 mm2
Qseven™ module socket
Support 2S1P up to 4S2P, parallel or
sequential battery operation
S3 support (Suspend to RAM)
LEDs provide a direct view of charging and
battery capacity status
SDIO socket
Mini PCI Express socket
LVDS
DVI output through HDMI connector
Input voltage of 19V DC
6x USB
Output 5V, 7A and 5V Standby
Ethernet
Battery charging max. 17V, max. 3A
2 SATA & SATA power
Size 70 mm x 60 mm
19V DC power input with battery management signals
14
congatec
COM Express™ - the concept
COM Express™ is a PICMG standard that defines a Computer-On-Module, or COM, packaged as a super component. The defined interfaces provide a smooth transition path from legacy interfaces to LVDS (Low Voltage
Technology
Differential Signaling) serial interfaces. This includes SDVO, PCI Express and Serial ATA. COM Express™ defines
5 different pinout types in order to be scalable for future applications.
Thermal Design
ExpressCard™
About PICMG
COM Express™ defines 440 interconnect pins
between the COM Express™ module and the
carrier board. Legacy buses such as PCI, parallel
ATA and LPC are supported along with new serial
high speed interfaces such as PCI Express, Serial
ATA and Gigabit Ethernet.
As with XTX™ and ETX®, the COM Express™
definition includes a heatspreader that acts as
a thermal interface between the COM Express™
module and the system‘s cooling solution. All
heat generating components are thermally
conducted to the heatspreader in order to avoid
hot spots.
COM Express™ supports ExpressCard™ slots.
ExpressCard™ is the successor to PCMCIA. This
interface allows the use of USB 2.0 and PCI
Express™ applications as well.
PICMG is a consortium of over 450 companies
who collaboratively develop open specifications
for high performance telecommunications and
industrial computing applications. The members
of the consortium have a long history of developing leading edge products for these industries.
2x SDVO
(shared with PEG)
IDE
PCI 32 Bit
VCC
COM Express™ defines freely usable general
purpose inputs and outputs.
PCI Express Graphic (PEG)
(+12V primary, +5V standby,
3,3V RTC)
Row A&B:
6x PCI Express
4x SATA
8x USB
2x ExpressCard
1x Ethernet 100/1000
AC’97/HDA
Flatpanel (2x24Bit LVDS)
VGA
TVout
I²C
LPC
SMB
8x GPIO
COM Express
(PEG x16)
GPIO
The PEG interface utilizes up to 16 PCI Express
lanes in order to drive an external ultra high
performance graphic controller located on the
carrier board.
15
Row C&D:
PCI Express Graphics
D
C
B
A
w w w.congatec.com
XTX / ETX
COM Express™ modules are available in three
different sizes: Compact, Basic and Extended.
The primary difference between the modules is
the overall physical size and the performance
envelope supported by each. The Extended
module is the biggest and can support more
power consuming processors and chips with
larger footprints.
In addition to the 32 bit parallel PCI bus, COM
Express™ offers up to 22 PCI Express™ lanes. This
allows the customer to equip their embedded
PC application with the next generation of PC
performance. PCI Express™ is a low pin count
interface with maximum bandwidth per pin. The
scalable bandwidth is 2.5 GBit/s per lane and
direction.
compact 95x95mm²
Size
PCI Express
basic 125x95mm²
COM Express™ is a legacy free standard. Outdated interfaces such as floppy, PS/2 keyboard/
mouse, RS232, LPT are no longer supported. If required, these legacy interfaces can be optionally
generated on the customized carrier board.
extended 155x110mm²
Legacy free
Qseven
New interfaces
COM Express™ - Product Overview
COM Express™
conga-BM45
conga-B945
conga-BA945
Formfactor
COM Express™ Basic
Type II connector layout
COM Express™ Basic
Type II connector layout
COM Express™ Basic
Type II connector layout
Processor
Intel® Core® 2 Duo T9400, 2.53 GHz
up to
Intel® Celeron® M575 2.0 GHZ
Intel® Celeron® M423
1.06 GHz up to
Intel® Core™ 2 Duo 2.16 GHz
Intel® Atom™ N270, 1.6 GHz,
512 MByte cache, 533 MHz FSB,
45nm, 2.5W TDP
Chipset
Intel® GM45 / ICH9M-E
Intel® GL40 / ICH9M-E
Intel® 945GME / ICH7-M
Intel® 945GME / ICH7-M
DRAM
max. 8 GByte DDR3 1067 MHz
max. 4 GByte DDR2 667 MHz
max. 4 GByte DDR2 667 MHz
Mass storage
4x SATA
1x EIDE (option)
2x SATA
1x EIDE
2x SATA
1x EIDE
Bus
PCI Express 5x1. 1x16 Lanes (PEG),
PCI Bus, LPC Bus, I²C
PCI Express 5x1 or 1x4 & 1x1 Links,
1x16 Lanes (PEG), PCI, LPC, I²C
PCI Express 5x1 or 1x4 & 1x1 Links,
1x16 Lanes (PEG), PCI, LPC, I²C
Ethernet
10/100/1000 LAN MAC + Intel
82567LM Phy. AMT 4.0 support
10/100/1000BaseT
10/100/1000BaseT
I/O
2x Express Card
8x USB
2x ExpressCard support
8x USB 2.0
2x ExpressCard support
8x USB 2.0
Graphics
Intel® GMA 4500 MHD
Intel® GMA 950
Intel® GMA 950
224 MByte
224 MByte
Panel Interface
CRT/ LVDS 2x24/TV-Out/2xSDVO,
HDMI, DisplayPort
CRT/ LVDS 2x24/TV-Out/2xSDVO
CRT/ LVDS 2x24/ TV-Out/2xSDVO
max. FP Resolution
1920x1200
1920x1200
1920x1200
HDA digital audio
AC'97 Rev. 2.2
HDA digital audio
AC'97 Rev. 2.2
HDA digital audio
Power Management
ACPI 3.0 with Battery Support
S3 Support (Supend to RAM)
ACPI 2.0 with Battery Support
S3 Support (Supend to RAM)
ACPI 2.0 with Battery Support
S3 Support (Supend to RAM)
Others
Board Controller
TPM option, Fan Control
Board Controller
TPM option, Fan Control
Board Controller
TPM option, Fan Control
max. Memory
Audio
16
conga -CAx
conga -CLX
COM Express™ Compact
Type II connector layout
COM Express™ Basic
Type II connector layout
COM Express™ Compact
Type II connector layout
COM Express™ Compact
Type II connector layout
COM Express™ Compact
Type II connector layout
Intel® Atom™ N270, 1.6 GHz,
512 MByte cache, 533 MHz FSB,
45nm, 2.5W TDP
Intel® Celeron® M 600 MHz
up to
Intel® Celeron® M 1.5 GHz
Intel® Atom™ processor
Z530 1.6 GHz
Z510 1.1 GHz
Intel® Atom™ processor
Z520 1.3 GHz
Z510 1.1 GHz
AMD Geode™ LX800
500 MHz
128 kByte L2 cache
Intel® 945GSE / ICH7-M
Intel® 910GMLE / ICH6-M
Intel® System Controller Hub US15W
Intel® System Controller Hub US15WPT
AMD Geode™ CS5536
max. 2 GByte DDR2 533 MHz
max. 2 GByte DDR2 400 MHz
max. 1 GByte on-board DDR2
533 MHz
max. 1 GByte on-board DDR2
533 MHz
max. 1 GByte DDR333
2x SATA
1x EIDE
2x SATA
1x EIDE
2x SATA
1x EIDE
1x SSD
1x EIDE
2x SATA
1x EIDE
PCI Express 3x1, PCI, LPC, I²C
PCI Express 3x1, PCI, LPC, I²C
PCI, LPC, I²C
PCI, LPC, I²C
PCI, LPC, I²C
10 / 100 /1000BaseT
10 / 100 /1000BaseT
10/100/1000BaseT
10/100/1000BaseT
10/100/1000BaseT
2x ExpressCard support
8x USB 2.0
2x ExpressCard support
8x USB 2.0
8x USB 2.0
2x SDIO
8x USB 2.0
4x USB 2.0
Intel® GMA 950
Intel® GMA 900
Intel® GMA 500
Intel® GMA 500
integrated, EPI support
max. 224 MByte
128 MByte
256 MByte
256 MByte
254 MByte
LVDS 2x18/1xSDVO
CRT / LVDS 2x24/2xSDVO
LVDS 1X24/SDVO
LVDS 1X24/SDVO
CRT/LVDS 1X18/ TV-Out
1920x1200
1920x1200
1366x768
1366x768
1024x768
AC'97 Rev. 2.2
HDA digital audio
AC'97 Rev. 2.2
HDA digital audio
HDA digital audio
HDA digital audio
ACPI 2.0 with Battery Support
S3 Support (Supend to RAM)
ACPI 2.0 with Battery Support
S3 Support (Supend to RAM)
ACPI 3.0 with Battery Support
S3 Support (Supend to RAM)
ACPI 3.0 with Battery Support
S3 Support (Supend to RAM)
ACPI 2.0 with Battery Support
S3 Support (Supend to RAM)
Board Controller
TPM option, Fan Control
Board Controller
TPM option, Fan Control
Board Controller
Fan Control, integrated EPI support
Board Controller
Fan Control, integrated EPI support
Board Controller
Fan Control, integrated EPI support
Qseven
conga -CA
COM Express
conga-B915
Technology
congatec
17
conga-CA945
w w w.congatec.com
XTX / ETX
AC'97 digital
conga-BM45
High End
45nm Intel® Core™2 Duo
Processors up to 2.53 GHz
Formfactor
COM Express™ Basic, (95 x 125 mm), Type II Connector Layout
CPU
Intel® Core™ 2 Duo T9400, 2.53 GHz (6M cache, 1066 MHz FSB, 45nm), Socket mPGA479M
Intel® Core™ 2 Duo P8400, 2.26 GHz (3M cache, 1066 MHz FSB, 45nm), Socket mPGA479M
Intel® Celeron™ processor T3100, 1.90 GHz (1m cache, 800 MHz FSB, 45nm), Socket mPGA478M (with Intel® GL40 Chipset)
Intel® Celeron™ processor 575, 2.0 GHz, Socket mPGA479M, no PEG Support (with Intel® GL40 Chipset)
DRAM
2 Sockets, SO-DIMM DDR3 1067 MHz, up to 8 GByte
Chipset
Graphics & Memory Controller Hub: Intel® GM45/GL40
Ethernet
Integrated within the ICH9M-E, 10/100/1000 LAN MAC + Intel® 82567 Phy, AMT 4.0 support
I/O Interfaces
5x PCI Express™ lanes, PCI Express Graphics (PEG x16), 3x Serial ATA® (AHCI) supporting RAID 0/1/5/10, 1x EIDE (UDMA-66/100) optional, 2x ExpressCard® (uses 2x USB & 2x PCI Express), 8x USB 2.0 (EHCI), PCI bus 33 MHz Rev. 2.3, LPC bus, I²C bus (fast mode, 400
kHz, multi-master), Power Loss Control, temperature controlled Power-Up
Sound
Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Mobile Intel® Graphics Media Accelerator 4500MHD, graphics core speeds up to 533 MHz,
improved graphics and 3D rendering performance, Intel® Dynamic Video Memory Technology (Intel® DVMT 5.0), OpenGL 2.0 and
DirectX10 support, Two independent pipelines for full dual view support
Motion Video Support
High performance hardware MPEG-2 decoding, WMV9 (VC-1) and H.264 (AVC) support
Blu-ray support @ 40 Mb/s, hardware motion compensation
Flat panel Interface
Dual channel 112 MHz LVDS transmitter, Supports flat panels with 1x18, 2x18, 1x24, 2x24 bit interface, VESA- and openLDI mappings,
resolutions from 640x480 up to 1920x1200, Automatic Panel Detection via EDID/EPI/DisplayID
DisplayPort (DP)
Supports two DisplayPorts multiplexed with the PCI Express Graphics interface
1.62 Gb/s and 2.7 Gb/s, 1/2/4 data lanes, 8B10B-coding, Hot-Plug detect support, HDCP support
HDMI
Single TMDS Link, only support for RGB
Video support for CEA modes 480i/p, 576i/p, 720p, 1080i/p and PC modes via dot clock, HDCP and HDMI repeater support
CRT Interface
300 MHz RAMDAC, resolutions up to QXGA
AUX Output
Supports two SDVO Ports multiplexed with the PCI Express Graphics interface
TV Out
Onboard TV encoder, supports HDTV (420p, 720p and 1080i), supports component and S-video
congatec Board Controller
Multi Stage Watchdog, non-volatile User Data Storage, Manufacturing and Board Information, Board Statistics,
BIOS Setup Data Backup, I²C bus (fast mode, 400 kHz, multi-master), Power Loss Control, temperature controlled Power-Up
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, Display Auto Detection, Backlight Control, Flash Update, Based on AMIBIOS8®
Security
Integrated TPM 1.2/TCPA security functions, tor Hash, RSA, keys and random numbers
Power Management
ACPI 3.0 with battery support
Operating Systems
Microsoft®, Windows Vista, Windows XP, Windows XP embedded, Windows® CE 6.0, LINUX, QNX
Power Consumption
Typ. application: TBD W @ 12V, see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 125 mm² (3.74" x 4.92")
Provides up to 8 GByte dual
channel DDR3 DRAM
Intel AMT 4.0
New Display Interfaces
DisplayPort and HDMI/HDCP
ACPI Battery Support,
Flat Panel detection
I/O Controller Hub: Intel® ICH9M-E
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
18
CPU
Intel® Core™ 2 Duo T7400, 2.16 GHz, (4M cache, 667 MHz FSB, 65nm), Socket mPGA479M
Intel® Core™ 2 Duo L7400 LV, 1.5 GHz, (4M cache, 667 MHz FSB, 65nm)
Intel® Core™ 2 Duo U7500 ULV, 1.06 GHz, (2M cache, 533 MHz FSB, 65nm)
Intel® Core™ Duo T2500, 2.0 GHz, (2M cache, 667 MHz FSB, 65nm), Socket mPGA479M
Intel® Core™ Duo L2400 LV, 1.66 GHz, (2M cache, 667 MHz FSB, 65nm)
Intel® Celeron® M440, 1.86 GHz, (1M cache, 533 MHz FSB, 65nm), Socket mPGA479M
Intel® Celeron® M423 ULV, 1.06 GHz, (1M cache, 533 MHz FSB, 65nm)
Featuring the latest
Intel® Core™2 Duo Processors
up to 2.16 GHz
DRAM
2 Sockets, SO-DIMM DDR2 667/PC5300 up to 4 GByte physical memory
Chipset
Graphics & Memory Controller Hub: Intel® 945GME
Provides up to 4 GByte top
of the line DRAM performance
I/O Controller Hub: Intel® 82801GHM (ICH7M-DH)
Gigabit Ethernet, Realtek RTL8111
5x PCI Express™ Lanes, PCI Express Graphic (PEG x16), 2x Serial ATA® (AHCI) supporting RAID 0 and RAID 1,
1x EIDE (UDMA-66/100), 2x Express Card® (uses 2x USB & 2x PCI Express), 8x USB 2.0 (EHCI), PCI Bus 33 MHz Rev. 2.3,
LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control, Temperature Controlled Power-Up
Sound
AC‘97 Rev.2.2 Compatible, Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Enhanced 256 Bit 3D Video Controller, Intel® Graphics Media Accelerator 950, up to 10.6 GB/sec memory bandwidth,
256-bit graphics core, max. 224 MByte 64 Bit Video RAM (DVMT 3.0), Dynamic Display Modes for flat-panel,
wide-screen and Digital TV support
Two independent pipelines for full dual view support
Motion Video Support
High Definition Hardware Motion Compensation to support high definition hi-bitrate MPEG2 media playback,
Up and Down Scaling of Video Content, High Definition Content Decode, HDTV (1080i/p) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings,
Resolutions 640x480 up to 1920x1200, Automatic Panel Detection via EPI, (Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
400 MHz RAMDAC, Resolutions up to 2048x1536 @ 75 Hz, including 1920x1080 @ >85 Hz (HDTV)
AUX Output
2x SDVO (shared with PEG x16 pins)
TV Out
Onboard TV encoder, supports HDTV (420p, 720p and 1080i), supports component and s-video
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control, Temperature Controlled Power-Up
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft®, Windows XP, Windows 2000, Windows XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application: 10.5 W @ 12V, (1.66 GHz Core Duo), see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 125 mm² (3.74" x 4.92")
19
XTX / ETX
Ethernet
I/O Interfaces
ACPI Battery Support,
Flat Panel detection ...
congatec
COM Express™ Basic, (95 x 125 mm), Type II Connector Layout
Technology
Formfactor
Qseven
conga-B945
COM Express
Performance
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
w w w.congatec.com
conga-BA945
Performance
Featuring the Intel® Atom™
processor N270, 1.6 GHz
Formfactor
COM Express™ Basic, (95 x 125 mm), Type II Connector Layout
CPU
Intel® Atom™ processor N270, 1.6 GHz, 512 kB cache, 533 MHz FSB, 45nm, 2.5W TDP
Provides up to 4 GByte Dual
Channel DRAM
DRAM
2 Sockets, SO-DIMM DDR2 667/PC5300 up to 4 GByte physical memory
Chipset
Graphics & Memory Controller Hub: Intel® 945GME
ACPI Battery Support,
Flat Panel detection ...
I/O Controller Hub: Intel® 82801 GHM (ICH7M-DH)
Ethernet
Gigabit Ethernet, Realtek RTL8111
I/O Interfaces
5x PCI Express™ Lanes, PCI Express Graphic (PEG x16), 2x Serial ATA® (AHCI) supporting RAID 0 and RAID 1,
1x EIDE (UDMA-66/100), 2x Express Card® (uses 2x USB & 2x PCI Express), 8x USB 2.0 (EHCI), PCI Bus 33 MHz Rev. 2.3,
LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control, Temperature Controlled Power-Up
Sound
AC‘97 Rev.2.2 Compatible, Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Enhanced 256 Bit 3D Video Controller, Intel® Graphics Media Accelerator 950, up to 10.6 GB/sec memory bandwidth,
256-bit graphics core, max. 224 MByte 64 Bit Video RAM (DVMT 3.0), Dynamic Display Modes for flat-panel, wide-screen
and Digital TV support
Two independent pipelines for full dual view support
Motion Video Support
High Definition Hardware Motion Compensation to support high definition hi-bitrate MPEG2 media playback,
Up and Down Scaling of Video Content, High Definition Content Decode, HDTV (1080i/p) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings, Resolutions 640x480 up to
1920x1200, Automatic Panel Detection via EPI, (Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
400 MHz RAMDAC, Resolutions up to 2048x1536 @ 75 Hz, including 1920x1080 @ >85 Hz (HDTV)
AUX Output
2x SDVO (shared with PEG x16 pins)
TV Out
Onboard TV encoder, supports HDTV (420p, 720p and 1080i), supports component and s-video
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control, Temperature Controlled Power-Up
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft®, Windows XP, Windows 2000, Windows XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application: <10 W @ 12V, see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 125 mm² (3.74" x 4.92")
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
20
CPU
Intel® Atom™ N270, 1.6 GHz, 512 kB cache, 533 MHz FSB, 45nm, 2.5W TDP
DRAM
1 Socket, SO-DIMM DDR2 533, up to 2 GByte
Allows cost effective and
power efficient COM Express™
solutions
Chipset
Graphics & Memory Controller Hub: Intel® 945GSE
I/O Controller Hub: Intel® 82801GBM (ICH7M)
Ethernet
Gigabit Ethernet, Realtek RTL8111C
I/O Interfaces
3x PCI Express™ Lanes, 2x Serial ATA® (AHCI), 1x EIDE (UDMA-66/100), 2x Express Card® (uses 2x USB & 2x PCI Express),
8x USB 2.0 (EHCI),
PCI Bus 33 MHz Rev. 2.3, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control, Temperature Controlled Power-Up
Sound
AC‘97 Rev.2.2 Compatible, Digital High Definition Audio Interface with support for multiple audio codecs
Graphic Interface
Enhanced 256 Bit 3D Video Controller, Intel® Graphics Media Accelerator 950, up to 10.6 GB/sec memory bandwidth,
256-bit graphics core, max. 224 MByte 64 Bit Video RAM (DVMT 3.0), Dynamic Display Modes for flat-panel, wide-screen
and Digital TV support
Two independent pipelines for full dual view support
Motion Video Support
High Definition Hardware Motion Compensation to support high definition hi-bitrate MPEG2 media playback,
Up and Down Scaling of Video Content, High Definition Content Decode, HDTV (1080i/p) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all 1x18, 2x18, Resolutions 640x480 up to 1920x1200, Automatic Panel Detection via EPI,
(Embedded Panel Interface, based on VESA EDID™ 1.3) and Display ID
CRT Interface
400 MHz RAMDAC, Resolutions up to 2048x1536 @ 75 Hz, including 1920x1080 @ >85 Hz (HDTV)
AUX Output
1x SDVO
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control, Temperature Controlled Power-Up
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft® Vista™, Windows XP, Windows XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application: <10 W @ 12V, see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 95 mm² (3.74" x 3.74")
Storage: -20 .. +80°C
Combines Intel® Atom™ processor
technology with the feature rich
embedded chipset Intel® 945 GSE
congatec
COM Express™ Compact, (95 x 95 mm), Type II Connector Layout
Technology
Formfactor
Qseven
conga-CA945
COM Express
Ultra Low Power
XTX / ETX
Storage: 5 - 95% r. H. non cond.
21
w w w.congatec.com
conga- B915
Economy priced COM Express™
modules
Performance up to 1.5 GHz
Intel® Celeron® M
ACPI Battery Support,
Flat Panel detection ...
Economy Class
Formfactor
COM Express™ Basic, (95 x 125 mm), Type II Connector Layout
CPU
Intel® Celeron® M 370 1.5 GHz, 1 MByte cache, FSB 400 MHz
Intel® Celeron® M 373 1.0 GHz, ULV, 512 k cache, FSB 400 MHz
Intel® Celeron® M 600 MHz, ULV, 512 kByte cache, FSB 400 MHz, eco version utilizing Intel® 910GMLE Chipset (no PEG port)
DRAM
SO-DIMM DDR2 DDR533/PC4200 up to 2 GByte
Chipset
Graphics & Memory Controller Hub: Intel® 915GME
I/O Controller Hub: Intel® 82801FBM (ICH6-M)
Ethernet
Gigabit Ethernet, Realtek RTL8111
I/O Interfaces
3x PCI Express™ Lanes, PCI Express Graphic (PEG x16), 2x Serial ATA® (AHCI), 1x EIDE (UDMA-66/100), 2x Express Card®
(uses 2x USB & 2x PCI Express), 8x USB 2.0 (EHCI), PCI Bus 33 MHz Rev. 2.3, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master)
Sound
AC‘97 Rev.2.2 Compatible, Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Enhanced 256 Bit 3D Video Controller, Intel® Graphics Media Accelerator 900, 533 MHz Memory Clock,
max. 128 MByte 64 Bit Video RAM (DVMT 3.0)
Two independent pipelines for full dual view support
Motion Video Support
Motion Compensation, Subpicture Support, Dynamic Bob & Weave, HDTV (1920x1080) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings,
Resolutions 640x480 up to 1920x1200, Automatic Panel Detection via EPI,
(Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
400 MHz RAMDAC, Resolutions up to 2048x1536 @ 75 Hz, (QXGA), including 1920x1080 @ >85 Hz (HDTV)
AUX Output
2x SDVO (shared with PEG port)
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master)
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft® Windows XP, Windows 2000, Windows XP embedded, Microsoft® Windows® CE 5.0/6.0,
LINUX, QNX
Power Consumption
Typ. application: 6.5 W @ 12V, (Intel® Celeron® M 1 GHz), see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 125 mm² (3.74" x 4.92")
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
22
conga-CA
Compact COM Express Module based on Intel® Atom™ Processor Z5xx Series
congatec
Low Power Consumption
Formfactor
COM Express™ Compact, (95 x 95 mm), Type II Connector Layout
CPU
Intel® Atom™ processor Z530 1.6 GHz, 533 MHz FSB and memory bus speed, 512k L2 cache, 45 nm,
with Hyper-Threading Technology
Intel® Atom™ processor Z510 1.1 GHz, 400 MHz FSB and memory bus speed, 512k L2 cache, 45 nm
DRAM
Up to 1 GByte on-board DDR2 400/533 MHz
Chipset
Intel® System Controller Hub US15W
Ethernet
Gigabit Ethernet Realtek RTL8111
I/O Interfaces
2x SATA, 1x EIDE (UDMA-66/100), PCI bus Rev. 2.3, LPC bus, 8x USB 2.0, I²C bus
Sound
Intel® High Definition Audio (Intel® HD Audio)
Graphics
Intel® Graphics Media Accelerator 500 (Intel® GMA 500), up to 256 MByte frame buffer supporting Direct X 9.0E and Open GL 2.0
Video Decode
Acceleration
Full hardware acceleration for MPEG2, MPEG4, H.264, WMV9 and VC1
Motion Video Support
Single channel 112 MHz LVDS transmitter, support for flat panels (1920x1080) with 1x18 and
1x24 bit data mapping up to resolutions of 1366x768 pixel
Single channel SDVO interface, supports resolutions up to 1920x1080 pixel
Dual independent display support
congatec Board Controller
Multi Stage Watchdog, non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup, Data Backup, I²C bus (fast mode, 400 kHz, multi-master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, Display Auto Detection, Backlight Control, Flash Update, based on AMIBIOS8®
Power Management
ACPI 3.0 with battery support
Operating Systems
Microsoft® Windows® Vista, Windows® XP, Windows® XP embedded, Windows® CE 6.0, LINUX, QNX
Power Consumption
Typ. application 5 Watt
Temperature
Operating: 0 to +60°C
Storage: -20 to +80°C, extended temperature versions in preparation
Humidity
Operating: 10 to 90% r. H. non cond.
Storage: 5 to 95% r. H. non cond.
Size
95 x 95 mm² (3¾" x 3¾")
Compact size for easy
integration
XTX / ETX
COM Express
Qseven
Extremely low power consumption,
Flat Panel detection ...
Technology
Best Performance / Watt
COM Express™ Module
23
w w w.congatec.com
conga-CAx
Industrial Temperature
Extended Temperature Range
-40° .. +85°C
Formfactor
COM Express™ Compact, (95 x 95 mm), Type II Connector Layout
CPU
Intel® Atom™ processor Z520PT 1.3 GHz, 533 MHz FSB and memory bus speed, 512k L2 cache, 45 nm,
with Hyper-Threading Technology, industrial temperature
Intel® Atom™ processor Z510PT 1.1 GHz, 400 MHz FSB and memory bus speed, 512k L2 cache, 45 nm
with Hyper-Threading Technology, industrial temperature
DRAM
Up to 1 GByte on-board DDR2 400/533 MHz
Chipset
Intel® System Controller Hub US15WPT, industrial temperature
Ethernet
Intel® Gigabit Ethernet 82574L Controller
I/O Interfaces
1x EIDE (UDMA-66/100), PCI bus Rev. 2.3, LPC bus, 8x USB 2.0, I²C bus
Mass Storage
Onboard IDE Solid State Disk up to 8GB
Sound
Intel® High Definition Audio (Intel® HD Audio)
Graphics
Intel® Graphics Media Accelerator 500 (Intel® GMA 500), up to 256 MByte frame buffer supporting Direct X 9.0E and Open GL 2.0
Video Decode Acceleration
Full hardware acceleration for MPEG2, MPEG4, H.264, WMV9 and VC1
Motion Video Support
Single channel 112MHz LVDS transmitter, support for flat panels with 1x18 and
x24 bit data mapping up to resolutions of 1366x768 pixel
Single channel SDVO interface, supports resolutions up to 1920x1080 pixel
Dual independent display support
congatec Board Controller
Multi Stage Watchdog, non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup, Data Backup, I²C bus (fast mode, 400 kHz, multi-master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, Display Auto Detection, Backlight Control, Flash Update, based on AMIBIOS8®
Power Management
ACPI 3.0 with battery support
Operating Systems
Microsoft® Windows® Vista, Windows® XP, Windows® XP embedded, Windows® CE 6.0, LINUX, QNX
Compact COM Express™ Module
with best Performance per Watt Ratio
congatec Embedded BIOS,
Flat Panel Detection, ...
Power Consumption
Typ. application 5 Watt
Temperature
Operating: -40 to +85°C
Storage: -40 to +85°C, extended temperature
Humidity
Operating: 10 to 90% r. H. non cond.
Storage: 5 to 95% r. H. non cond.
Size
95 x 95 mm² (3¾" x 3¾")
24
COM Express™ Compact, (95 x 95 mm), Type II Connector Layout
Entry level COM Express™ Module
CPU
AMD Geode™ LX 800 Processor, 500 MHz, 400 MT/s memory bus speed, 128 kByte L2 Cache
DRAM
SO-DIMM DDR333/PC2700 up to 1 GByte
Chipset
Companion Device: AMD Geode™ CS5536
Ethernet
Gigabit Ethernet or, IEEE 802.3u 100Base-Tx
I/O Interfaces
2x Serial ATA®, 1x EIDE (UDMA-66/100), 4x USB 2.0 (EHCI), PCI Bus Rev. 2.1, no ISA Bus, LPC Bus,
I²C (Fast Mode, 400 kHz, Multi Master)
Sound
AC‘97 Digital Audio Interface Rev. 2.2
Graphics
Integrated in chipset, Unified Memory Architecture (UMA) up to 254 MByte graphic memory space
Motion Video Support
H/W Up- and Downscaling, High Definition digital video support, alpha blending and color keying
Flat panel Interface
68 MHz LVDS Transmitter Automatic Panel Detection via EPI (Embedded Panel Interface based on, VESA EDID™ 1.3),
1x18 Bit TFT, resolutions 320x240 up to 1024x768
CRT Interface
350 MHz RAMDAC, Resolutions up to, 1920x1440x32bpp @ 85 Hz, 1600x1200x32bpp @ 100 Hz
TV Out (optional)
onboard TV encoder, supports HDTV (420p, 720p and 1080i), supports component and s-video
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master, Power Loss Control)
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Flash Update, Based on Insyde XpressROM
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft® Windows® XP, Windows® 2000, Windows® XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
typ. application 5.5W @ 5V, see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 95 mm² (3.74" x 3.74")
Compact size for easy integration
Low power consumption,
Flat Panel detection ...
COM Express
Ethernet: RTL8110SC(L) (Gigabit)
congatec
Formfactor
Technology
conga-CLX
Qseven
Entry Level
Storage: -20 .. +80°C
XTX / ETX
Storage: 5 - 95% r. H. non cond.
25
w w w.congatec.com
COM Express™ Engineering Tools
conga-CEVAL
conga-CKIT
Evaluation Carrier Board for COM Express™ modules. To
This complete kit provides the ability to start evaluating
achieve a quick start with COM Express™ congatec offers
COM Express™ modules immediately.
an evaluation carrier board, which routes all the COM
Contents:
Express™ signals to standard interface connectors. Supports COM Express™ Compact and Basic modules using
connector Pinout Type 2.
4x1 PCI Express, 1xExpress Card, 1x 16 PCI Express
Graphics (PEG), 1x Mini PCI Express Card, 4x 32 PCI
Gigabit Ethernet
8x USB
AC97 compatible codec
HDA optional via connector
4x SATA, 1x PATA
4x COM, 1x LPT, 1x Floppy, PS2 kbd./mouse
PCI display
System speaker, Power button, Reset button, CMOS Battery
conga-CEVAL evaluation carrier board
conga-Cdebug Post-Code and debug card with cables
conga-FPA1 flat panel adapter with cables
HDA (High Definition Audio) adapter card
Dual DVI-D ADD2 card
ATX power supply with cables
DVD drive
USB Memory Stick 128 MByte
Cable set for IDE, SATA
congatec software tools & Quick Installation Guide
for download on our website:
www.congatec.com / ckit.html
CRT connector, LVDS interface
ATX connector,12V/GND banana jacks
26
SMART Battery Manager
Module
congatec
Qseven
Technology
Battery Management for COM Express™
conga - SBM 2 C- Kit
This battery manager kit can be operated in conjunction
with the congatec COM Express™ starter kit.
implemented as a plug in module. This COM Express™
version supports 12V power line.
Supports battery configurations 2S1P up to 4S3P
Parallel battery operation (sequential on request)
S3 support (Suspend to RAM)
LEDs provide a direct view of charging and battery
capacity status
When used together they provide a fast and simple way
of evaluationg all the features and configurations offered by the COM Express™ and conga-SBM2C modules.
Contents:
COM Express
conga - SBM²C is a complete battery manager sub system
SMART Battery Manager Module conga-SBM2C
SMART Battery
Complete set of cables required for testing in conjunction
with the conga-CEVAL evaluation carrier board
Input voltage of 19V DC, with input power delimitation
Output 12V / ~70W and 5V / ~30W, 5V Standby ~1W
Battery charging max. 17 V, max. 3A total
XTX / ETX
Size 68 mm x 110 mm x 12.5 mm
27
w w w.congatec.com
COM Express™ Engineering Tools
conga-IVI Starterkit
The Low-Power Intel® In-Vehicle Infotainment (IVI) Reference
Design (Low-Power Intel® IVI Reference Design) enables
development of an OIP (Open Infotainment Platform) that
addresses requirements for in-car operating conditions,
as well as quality and reliability standards. The integrated
platform incorporates a variety of IVI features and comes
with complete schematics and bill of materials (BOM) to
simplify development and speed time-to-market.
Items:
Intel® Low Power IVI Reference Carrier Board + conga-CA
Embedded CPU Module + Heatsink
Automotive system controller board supporting NEC V850
NEC 800x480 7" LVDS display with touch screen
Power supply 12V ~5A operating system
USB stick or DVDs from OS vendors
Slimline DVD drive
160 GByte disk drive
GPS Receiver (for USB connection)
BT and radio tuner antenna
Intel® Wireless WiFi Link PCIe Mini Card
Rear panel wiring harness plus system cables
28
congatec
conga-FPA2
Cooling Solutions
COM Express™ Debug Platform. The conga-Cdebug
conga-FPA2 is a universal flat panel adapter board that
congatec cooling solutions are available for all COM
provides a debug platform for your application specific
has been designed to be EPI (Embedded Panel Interface)
Express modules.
carrier board. Simply use it as a transparent debug inter-
compliant. It can be used for either prototyping, demon-
face between your carrier board and the COM Express™
stration purposes, or for debugging certain issues. It may
module.
also serve as a reference for the implementation of panel
adaptations on customer specific carrier boards.
18 and 24 Bit single/dual-pixel support
VGA
Configuration Memory
EPI compliant EEPROM for custom panel settings
LED`s:
• 4x GPIO status
• 4x Command Byte Enable (CBE=PCI bus activity)
Size 95 x 95 mm2
Power Management
All typ. supply voltages selectable
Fully s/w controlled power sequencing
Qseven
Power connector for carrier board independent operation
Power and reset switch
Active cooling solution
Thermal stacks
Backlight Connector: Supports most backlight converters
conga-LDVI
Software controlled brightness adjustment
DVI Converter Module for LVDS
conga-ADD2DP
Compact module to convert LVDS to DVI-D. It can be
used with either XTX™ or COM Express™ modules. It`s now
possible to realize a dual port DVI-D system independent
of the typical Video Output Ports (SDVO or DVO).
COM Express
2x SATA connector
Multiple I/O Combinations
LVDS to TTL
18 and 24 Bit single-pixel support
2x USB
Heatspreader
Passive cooling solution
Postcode display for LPC or PCI
LPC Firmware Hub Flash (FWH)
Technology
conga-Cdebug
Add2 Card for DisplayPort
XTX / ETX
The conga-ADD2DP provides two DisplayPort
and two HDMI interfaces when used in conjunction with
the conga-CEVAL and the conga-BM45.
29
w w w.congatec.com
XTX™ - the concept
XTX™ is an expansion and continuation of the well established and highly successful ETX® standard. XTX™ offers
the newest I/O technologies on this proven form factor. Now that the ISA bus is being used less and less in modern
embedded applications, congatec offers different features on the X2 connector instead of the ISA bus currently
found on the ETX® platform.
PCI Express
Backwards Compatible to ETX®
Identical Mechanics to ETX®
In addition to the 32 bit parallel PCI bus, XTX™
offers 4 PCI Express™ lanes. This allows the customer to equip their embedded PC application
with next generation of PC performance. PCI
Express™ is a low pin count interface with maximum bandwidth per pin. This results in cost
optimization and very compact solutions with
the highest I/O performance. The scalable bandwidth is 2.5 GBit/s per lane and direction.
XTX™ is 100% backwards compatible to the
ETX® standard. Most customer specific carrier
boards will not require a redesign in order to use
congatec’s XTX™ modules. The additional XTX™
signals do not affect the onboard ISA functions.
The ISA bus can be implemented through the
use of a PCI-ISA bridge on the customer specific
carrier board. As an alternative to this the customer can use the readily available XTX™ LPC
bus.
The size (95x114 mm), the mounting, the height,
the connectors and the heatspreader are exactly
the same as defined in the ETX® specification.
Existing ETX® solutions can easily switch to the
innovative XTX™ platform without any mechanical change.
Serial ATA Interfaces (SATA)
SATA is an enhancement of the parallel ATA therefore offering higher performance. As a result of
this enhancement the traditional restrictions of
parallel ATA are overcome with respect to speed
and EMI.
ExpressCard™
XTX™ supports up to two ExpressCard™ slots.
ExpressCard™ is the successor to PCMCIA. This
interface allows the use of USB 2.0 and PCI
Express™ applications as well.
X2
High Speed USB
XTX™ offers two additional USB 2.0 ports thereby
increasing the total amount of USB ports available to 6.
LPC Bus
As a replacement to the no longer supported ISA
bus, XTX™ offers the LPC (Low Pin Count) bus. The
LPC bus corresponds approximately to a serialized
ISA bus yet with a significantly reduced number of
signals. Due to the software compatibility to the ISA
bus, I/O extensions such as additional serial ports
can be easily implemented using the LPC bus.
X1
4x PCI Express
4x Serial ATA
2x USB 2.0
(2x ExpressCard)
High Definition Audio
LPC Bus
Ext. System Management
Fan Control
PCI Bus
4x USB 2.0
Mic In (Mono)
Line In (Stereo)
Line Out (Stereo)
EIDE 1+2
Ethernet
SM Bus
I²C Bus 400 kHz
Speaker
Power Control
Power Management
VGA
TV-Out
LCD (LVDS or TTL)
COM1+2
IrDA
LPT/Floppy (shared)
X4
X3
30
congatec
conga-XA945
conga-X915
conga-X855
conga-XLX
Formfactor
ETX® with XTX™ Extensions
ETX® with XTX™ Extensions
ETX® with XTX™ Extensions
ETX® with XTX™ Extensions
ETX® with XTX™ Extensions
ETX® with XTX™ Extensions
Processor
Intel® Core™ 2 Duo U7500
1.06 GHz up to
Intel® Core™ 2 Duo L7500
1.6 GHz
Intel® Celeron® M423 1.06
GHz up to
Intel® Core™ 2 Duo L7400
1.5 GHz
Intel® Atom™ N270, 1.6 GHz,
512 MByte cache, 533 MHz
FSB, 45nm, 2.5W TDP
Intel® Celeron® M 600 MHz
up to
Intel® Pentium® M 745 1.8
GHz
Intel® Celeron® M 600 MHz
up to
Intel® Celeron® M 1.0 GHz
AMD Geode™ LX800
500 MHz
128 kByte L2 cache
Chipset
Intel® GME965 / ICH8-M
Intel® 945GME / ICH7-M
Intel® 945GME / ICH7-M
Intel® 915GME / ICH6-M
Intel® 852GM / ICH4
Intel® 855GME / ICH4
AMD Geode™ CS5536
DRAM
max. 2 GByte DDR2 667
max. 2 GByte DDR2 667
max. 2 GByte DDR2 533 MHz
max. 2 GByte DDR2 400
max. 1 GByte DDR333
max. 1 GByte DDR333
Mass storage
3x SATA
1x EIDE
2x SATA
1x EIDE
2x SATA
1x EIDE
2x SATA
1x EIDE
2x SATA
2x EIDE
2x SATA
2x EIDE
Bus
4x PCI Express Lanes, PCI,
LPC, I²C
4x PCI Express Lanes, PCI,
LPC, I²C
4x PCI Express Lanes, PCI,
LPC, I²C
4x PCI Express Lanes, PCI,
LPC, I²C
PCI, LPC, I²C
PCI, LPC, I²C
Ethernet
10 / 100 BaseT
10 / 100 BaseT
10 / 100 BaseT
10 / 100 BaseT
10 / 100 BaseT
10 / 100 BaseT
I/O
2x ExpressCard support
6x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
2x ExpressCard support
6x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
2x ExpressCard support
6x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
2x ExpressCard support
6x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
6x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
4x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
Graphics
integrated, EPI support
integrated, EPI support
integrated, EPI support
integrated, EPI support
integrated, EPI support
integrated, EPI support
max. Memory
256 MByte
224 MByte
224 MByte
128 MByte
64 MByte
254 MByte
Panel Interface
CRT / LVDS 2x24/ TVOut /2xSDVO
CRT / LVDS 2x24/ TVOut /2xSDVO
CRT / LVDS 2x24/ TVOut /2xSDVO
CRT / LVDS 2x24/ 2xSDVO
CRT / LVDS 2x24 / DVO
CRT / LVDS 1x18 / TTL / TV-Out
max. FP Resolution
1920x1200
1920x1200
1920x1200
1920x1200
1600x1200
1024x768
Audio
AC'97 digital audio
AC'97 Rev. 2.2
Line In, Line Out, Mic
HDA digital audio
AC'97 digital audio
AC'97 Rev. 2.2
Line In, Line Out, Mic
HDA digital audio
AC'97 digital audio
AC'97 Rev. 2.2
Line In, Line Out, Mic
HDA digital audio
AC'97 digital audio
AC'97 Rev. 2.2
Line In, Line Out, Mic
HDA digital audio
AC'97 digital audio
AC'97 Rev. 2.2
Line In, Line Out, Mic
AC'97 digital audio
AC'97 Rev. 2.2
Line In, Line Out, Mic
Power
Management
ACPI 2.0 w. Battery Support,
S3 Support (Supend to RAM),
APM 1.2
ACPI 2.0 w. Battery Support,
S3 Support (Supend to RAM),
APM 1.2
ACPI 2.0 w. Battery Support,
S3 Support (Supend to RAM),
APM 1.2
ACPI 2.0 w. Battery Support,
S3 Support (Supend to RAM),
APM 1.2
ACPI 2.0 w. Battery Support
APM 1.2
ACPI 2.0 w. Battery Support,
S3 Support (Supend to RAM)
APM 1.2
Others
Board Controller, TPM option
Board Controller, TPM option
Board Controller, TPM option
Board Controller, TPM option
Board Controller
Board Controller
31
w w w.congatec.com
Technology
conga-X945
Qseven
conga-X965
COM Express
XTX™
XTX / ETX
XTX™ - Product Overview
conga-X965
High Graphics Performance
Provides latest graphics
performance featuring the
latest Intel® GME 965 chipset
Formfactor
ETX® Spec 2.7. without ISA Support, XTX™ Extensions
CPU
Intel® Core™ 2 Duo U7500 1.06 GHz, (2M cache, 533 MHz FSB, 65nm)
Intel® Core™ 2 Duo L7500 1.6 GHz, (4M cache, 800 MHz FSB, 65nm)
Intel® Celeron® M 550, 2.0 GHz, (1M cache, 533 MHz FSB, 65nm)
DRAM
SO-DIMM DDR2 667/PC 5300 up to 2 GByte
Chipset
Graphics & Memory Controller Hub: Intel® GME965 I/O Controller Hub: Intel® 82801HBM (ICH8-M)
I/O Controller: Winbond 83627HG Ethernet PHY: Intel® 82562
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
4x PCI Express™ Lanes, 3x Serial ATA® (AHCI), 1x EIDE (UDMA-66/100), 2x Express Card® (uses 2x USB & 2x PCI Express),
6x USB 2.0 (EHCI), PCI Bus Rev. 2.3, no ISA Bus, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master), Floppy (Shared with LPT),
LPT (EPP/ECP, Shared with Floppy), 2x COM Ports TTL Level, 1x IrDA Port, ­PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 Compatible, Line In, Line Out, Mic In, Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Intel® Graphics Media Accelerator X3100
max. Resolution 2048 x 1536 (QXGA) @ 60Hz and 32bpp, 500MHz core render clock with Intel® Display Power Saving Technology
(DPST 3.0), max. 384 MByte 64 Bit Video RAM (DVMT 4.0), Dynamic Display Modes for flat-panel, wide-screen and Digital TV support
Two independent pipelines for full dual view support
Motion Video Support
MPEG-2 Hardware Acceleration, High Definition Hardware Motion Compensation to support high definition hi-bitrate MPEG2 media
playback, Up and Down Scaling of Video Content, High Definition Content Decode, HDTV (1080i/p) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all Support for 18 and 24 bit panels, VESA- and openLDI-Mappings,
Resolution up to WUXGA (1920x1200 @ 60Hz), Automatic Panel Detection via EPI, (Embedded Panel Interface,
based on VESA EDID™ 1.3)
CRT Interface
300 MHz RAMDAC
AUX Output
2x SDVO, True HDTV 1080p support
TV Out
On ETX® X3 connector, Three integrated 10-bit DACs, True HDTV 1080p support
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information,
Board Statistics, BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Serial Port Console Redirection,
for Remote Setup and Installation, Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft® Windows® Vista™, Windows® XP, Windows® 2000, Windows® XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
max. 30W @ 5V, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
Intel® Core™ 2 Duo Processors
up to 4 MByte L2 cache
ACPI Battery Support,
Flat Panel detection ...
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
32
CPU
Intel®
Intel®
Intel®
Intel®
Intel®
Featuring the latest Intel® Core™
2 Duo LV Processors up to 1.5 GHz
Core™ 2 Duo L7400 LV, 1.5 GHz, (4M cache, 667 MHz FSB, 65nm)
Core™ 2 Duo U7500 ULV, 1.06 GHz, (2M cache, 533 MHz FSB, 65nm)
Core™ Duo L2400 LV, 1.66 GHz, (2M cache, 667 MHz FSB, 65nm)
Celeron® M440, 1.86 GHz, (1M cache, 533 MHz FSB, 65nm)
Celeron® M423 ULV, 1.06 GHz, (1M cache, 533 MHz FSB, 65nm)
Provides up to 2 GByte top of the
line DRAM performance
SO-DIMM DDR2 667/PC 5300 up to 2 GByte
Chipset
Graphics & Memory Controller Hub: Intel® 945GME I/O Controller Hub: Intel® 82801GBM (ICH7-M)
I/O Controller: Winbond 83627HG Ethernet PHY: Intel® 82562
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
4x PCI Express™ Lanes, 2x Serial ATA® (AHCI), 1x EIDE (UDMA-66/100), 2x Express Card® (uses 2x USB & 2x PCI Express),
6x USB 2.0 (EHCI), PCI Bus Rev. 2.3, no ISA Bus, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master), Floppy (Shared with LPT),
LPT (EPP/ECP, Shared with Floppy), 2x COM Ports TTL Level, 1x IrDA Port, ­PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 Compatible, Line In, Line Out, Mic In, Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Enhanced 256 Bit 3D Video Controller, Intel® Graphics Media Accelerator 950, Up to 10.6 GB/sec memory bandwidth, 256-bit
graphics core, max. 224 MByte 64 Bit Video RAM (DVMT 3.0), Dynamic Display Modes for flat-panel, wide-screen and Digital TV
support
Two independent pipelines for full dual view support
Motion Video Support
High Definition Hardware Motion Compensation to support high definition hi-bitrate MPEG2 media playback,
Up and Down Scaling of Video Content, High Definition Content Decode, HDTV (1080i/p) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings,
Resolutions 640x480 up to 1920x1200, Automatic Panel Detection via EPI, (Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
400 MHz RAMDAC, Resolutions up to 2048x1536 @ 75 Hz, including 1920x1080 @ >85 Hz (HDTV)
AUX Output
2x SDVO
TV Out
On ETX® X3 connector
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Serial Port Console Redirection,
for Remote Setup and Installation, Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft® Windows® Vista™, Windows® XP, Windows® 2000, Windows® XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application: 10.5 W @ 5V, (1.66 GHz Core Duo), CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
33
ACPI Battery Support,
Flat Panel detection ...
XTX / ETX
DRAM
congatec
ETX® Spec 2.7. without ISA Support, XTX™ Extensions
Technology
Formfactor
Qseven
conga-X945
COM Express
High Performance
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
w w w.congatec.com
conga-XA945
Low Power Consumption
Featuring Intel® Atom® processor
N270, 1.6 GHz
Formfactor
ETX® Spec 2.7. without ISA Support, XTX™ Extensions
CPU
Intel® Atom™ processor N270, 1.6 GHz, 512kB cache, 533MHz FSB, 45nm, 2.5W TDP
DRAM
SO-DIMM DDR2 667/PC5300 up to 2 GByte physical memory
Chipset
Graphics & Memory Controller Hub: Intel® 945GME I/O Controller Hub: Intel® 82801 GBM (ICH7-M)
I/O Controller: Winbond 83627DHG Ethernet PHY: Intel® 82562
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
3x PCI Express™ Lanes, 2x Serial ATA® (AHCI), 1x EIDE (UDMA-66/100), 2x Express Card® (uses 2x USB & 2x PCI Express),
6x USB 2.0 (EHCI), PCI Bus Rev. 2.3, no ISA Bus, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master), Floppy (Shared with LPT),
LPT (EPP/ECP, Shared with Floppy), 2x COM Ports TTL Level, 1x IrDA Port, ­PS/2 Keyboard, Mouse, Fan Control
Sound
AC‘97 Rev.2.2 Compatible, Line In, Line Out, Mic In, Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Enhanced 256 Bit 3D Video Controller, Intel® Graphics Media Accelerator 950, up to 10.6 GByte/sec memory bandwidth,
256-bit graphics core, max. 224 MByte 64 Bit Video RAM (DVMT 3.0), Dynamic Display Modes for flat-panel,
wide-screen and Digital TV support
Two independent pipelines for full dual view support
Motion Video Support
High Definition Hardware Motion Compensation to support high definition hi-bitrate MPEG2 media playback,
Up and Down Scaling of Video Content, High Definition Content Decode, HDTV (1080i/p) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings,
Resolutions 640x480 up to 1920x1200,
Automatic Panel Detection via EPI, (Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
400 MHz RAMDAC, Resolutions up to 2048x1536 @ 75 Hz, including 1920x1080 @ >85 Hz (HDTV)
AUX Output
2x SDVO
TV Out
On ETX® X3 connector
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Serial Port Console Redirection,
for Remote Setup and Installation, Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support, suspend to RAM (S3)
Operating Systems
Microsoft® Windows® Vista™, Windows® XP, Windows® 2000, Windows® XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application: <10 W @ 5V, see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
High Graphics Performance
ACPI Battery Support,
Flat Panel detection ...
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
34
Based on Intel® 915 chipset
CPU
Intel®
Intel®
Intel®
Intel®
DRAM
SO-DIMM DDR2 DDR400/PC3200 up to 2 GByte
Chipset
Graphics & Memory Controller Hub: Intel® 915GME I/O Controller Hub: Intel® 82801FBM (ICH6-M)
I/O Controller: Winbond 83627HG Ethernet PHY: Intel® 82562
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
4x PCI Express™ Lanes, 2x Serial ATA® (AHCI), 1x EIDE (UDMA-66/100),2x Express Card® (uses 2x USB & 2x PCI Express),
6x USB 2.0 (EHCI), PCI Bus Rev. 2.3, no ISA Bus, LPC Bus, I²C Bus, 400 kHz, Floppy (Shared with LPT), LPT (EPP/ECP, Shared with Floppy),
2x COM Ports TTL Level, 1x IrDA Port, PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 Compatible, Line In, Line Out, Mic In, Digital High Definition Audio Interface with support for multiple audio codecs
Graphics
Enhanced 256 Bit 3D Video Controller, Intel® Graphics Media Accelerator 900, 533 MHz Memory Clock,
max. 128 MByte 64 Bit Video RAM (DVMT 3.0),
Two independent pipelines for full dual view support
Motion Video Support
Motion Compensation, Subpicture Support, Dynamic Bob & Weave, HDTV (1920x1080) Support
Flat panel Interface
Dual 112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings, Resolutions 640x480 up to
1920x1200, Automatic Panel Detection via EPI, (Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
400 MHz RAMDAC, Resolutions up to 2048x1536 @ 75 Hz, (QXGA), including 1920x1080 @ >85 Hz (HDTV)
AUX Output
2x SDVO
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Serial Port Console Redirection,
for Remote Setup and Installation, Flash Update, Based on AMIBIOS8®
Security
TPM 1.2/ TCPA Security Functions, tor Hash, RSA, Keys and Random Numbers (optional)
Power Management
ACPI 2.0 with Battery support
Operating Systems
Microsoft® Windows® XP, 2000, Microsoft® Windows® XP embedded, Microsoft® Windows® CE 5.0, LINUX, QNX
Power Consumption
Typ. application 6.5W @ 5V, (1 GHz Celeron® M), see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
Pentium® M 745 1.8 GHz, 2 MByte cache, FSB 400 MHz
Pentium® M 738 1.4 GHz, LV, 2 MByte cache, FSB 400 MHz
Celeron® M 373 1.0 GHz, ULV, 512 k cache, FSB 400 MHz
Celeron® M 600 MHz, ULV, 512 kByte cache, FSB 400 MHz (Intel® 910GMLE Chipset)
Featuring Intel® Pentium® M
up to 1.8 GHz
High definition Audio,
ACPI Battery Support,
Flat Panel detection ...
congatec
ETX® Spec 2.7. without ISA Support, XTX™ Extensions
Technology
Formfactor
Qseven
conga-X915
COM Express
Economy Model
Storage: -20 .. +80°C
XTX / ETX
Storage: 5 - 95% r. H. non cond.
35
w w w.congatec.com
conga-X855
Economy Model
Full Featured Economy Model
Formfactor
ETX® Spec 2.7. without ISA Support, XTX™ Extensions
CPU
Intel®
Intel®
Intel®
Intel®
Intel®
DRAM
SO-DIMM DDR333/PC2700 max. 1 GByte
Chipset
Graphics & Memory Controller Hub: Intel® 855 GME I/O Controller Hub: Intel® 82801DB (ICH4)
I/O Controller: Winbond 83627HG Ethernet PHY: Intel® 82562
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
2x Serial ATA®, 2x EIDE (UDMA-66/100), 6x USB 2.0 (EHCI), PCI Bus Rev. 2.2, no ISA Bus, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master),
Floppy (Shared with LPT), LPT (EPP/ECP, Shared with Floppy), 2x COM Ports TTL Level, 1x IrDA Port, PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 Compatible, Line In, Line Out, Mic In, AC’97 Digital Audio Interface
Graphics
3D Video Controller, Intel® Extreme Graphics®, max. 64 MByte 64 Bit UMA Video RAM (DVMT)
Two independent pipelines for full dual view support
Motion Video Support
Motion Compensation, Subpicture Support
Flat panel Interface
112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings, Resolutions 640x480 up to
1600x1200 Automatic Panel Detection via EPI, (Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
350 MHz RAMDAC. Resolutions up to 2048x1536 @ 60 Hz (QXGA), incl. 1920x1080 @ 85 Hz (HDTV)
AUX Output
Intel® compliant DVO Port (12 Bit DDR), Supports external DVI, up to 165 MHz Pixelclock (UXGA)
TV Out
Optional via DVO port
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics, BIOS Setup Data
Backup, Fast Mode, Multi Master I2C Bus, 400 kHz, Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control (Backlight Control), Serial Port Console Redirection, for Remote Setup and
Installation, Flash Update, Based on AMIBIOS8®
Power Management
ACPI 2.0 with Battery Support
Operating Systems
Microsoft® Windows® XP, Windows® 2000, Windows® XP Embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application 6.5W @ 5V , (0.6 GHz Celeron® M) see manual for full details CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
Featuring Intel® Pentium® M
up to 1.6 GHz
ACPI Battery Support,
Flat Panel detection ...
Pentium® M 1.6 GHz, 1 MByte cache, FSB 400 MHz
Pentium® M 738 1.4 GHz, LV, 2 MByte cache, FSB 400 MHz
Pentium® M 1.1 GHz, 1 MByte cache, FSB 400 MHz (Value version utilizing Intel® Pentium® M 1.6 GHz @ 1.1 GHz)
Celeron® M 373 1.0 GHz, ULV, 512 kByte cache, FSB 400 MHz
Celeron® M 600 MHz, ULV, 512 kByte cache, FSB 400 MHz (eco version, with Intel® 852 GM chipset)
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
36
CPU
AMD Geode™ LX 800 Processor, 500 MHz, 400 MT/s memory bus speed, 128 kByte L2 Cache
Entry level module based on
AMD® Geode® LX800
DRAM
SO-DIMM DDR333/PC2700 up to 1 GByte
Chipset
Companion Device: AMD Geode™ CS5536 Ethernet: Realtec RTL8100C
I/O Controller: Winbond 83627HG Audio Codec: ALC658
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
2x Serial ATA® , 2x EIDE (UDMA-66/100), 4x USB 2.0 (EHCI), PCI Bus Rev. 2.1, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master),
Floppy (Shared with LPT), LPT (EPP/ECP, Shared with Floppy), 2x COM Ports TTL Level, 1x IrDA Port, PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 compatible, Line In, Line Out, Mic In, AC’97 digital audio interface
Graphics
Integrated in chipset, Unified Memory Architecture (UMA), up to 254 MByte graphic memory space
Motion Video Support
H/W Up- and Downscaling, High Definition digital video support, alpha blending and color keying
Flat panel Interface
68 MHz LVDS Transmitter Automatic Panel Detection via EPI (Embedded Panel Interface based on VESA EDID™ 1.3),
1x18 Bit TFT, resolutions 320x240 up to 1024x768, optional direct TTL interface
CRT Interface
350 MHz RAMDAC, Resolutions up to, 1920x1440x32bpp @ 85 Hz, 1600x1200x32bpp @ 100 Hz
TV Out
Optional onboard TV encoder, supports HDTV (420p, 720p and 1080i), supports component- and s-video,
signals on ETX X3 connector
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup,# I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control, (Auto Detection, Backlight Control), Flash Update, Based on Insyde XpressROM
Power Management
Typ. application 5W @ 5V see manuel for full details, ACPI 2.0 with Battery support, APM 1.2
Operating Systems
Microsoft® Windows® XP, Windows® 2000, Windows® XP embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application 5W @ 5V see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
Low power consumption
ACPI 2.0, Battery Support,
Flat Panel detection ...
Storage: -20 .. +80°C
XTX / ETX
Storage: 5 - 95% r. H. non cond.
congatec
ETX® Spec 2.7. without ISA Support, XTX™ Extensions
Technology
Formfactor
Qseven
conga-XLX
COM Express
Entry Level Model
37
w w w.congatec.com
XTX™ - Starterkits
conga-XEVAL
conga-XKIT
Evaluation Board for XTX™ modules. To achieve a quick
This complete kit provides the ability to start evaluating
start with XTX™ congatec offers an evaluation carrier
XTX™ modules immediately.
board, which routes all the XTX™ signals to standard inter-
Contents:
face connectors. With this you`re able to check out all of
the innovative XTX™ features and your specific expansions
immediately.
conga-XEVAL evaluation carrier board
conga-Xdebug Post-Code and debug card
2x PCI Express
conga-FPA1 flat panel adapter with cables
2x Express Card Socket
ATX power supply with cables
4x 32 Bit PCI
CD-ROM drive
1x LPT, 2x COM
USB Memory Stick 128 MByte
1x PS/2 Keyboard and Mouse
conga-XDVI DVI evaluation platform
10/100 Ethernet
Cable set for IDE, SATA, Floppy Drives
6x USB (2 routed to Express Card Sockets)
congatec software tools & Quick Installation Guide
for download on our website:
www. congatec.com / xkit.html
IrDA connector
COM3+4 via carrier board Super I/O
LPT2 via carrier board super I/O
4x SATA, 2x IDE (master/slave)
Audio:
• Additional AC`97 Audio Codec
• SPDIF optical
• Line in/Out (stereo)
• Mic in (mono)
38
congatec
XTX™ - Engineering Tools
Mini-ITX Carrier Board
for XTX™
conga-SBM2 is a complete battery manager sub-system
The conga-ITX/X is a full featured carrier
in the form of a plug-in module.
board for XTX™ and is the size of a Mini-ITX board.
Support 2S1P up to 4S3P, parallel or sequential battery
operation
Formfactor
Mini-ITX
S3 support (Suspend to RAM)
Supported Modules
all XTX™ Embedded Computer Modules
LEDs provide a direct view of charging and battery
capacity status
Expansion Slots
1x PCI with ATX Riser extension,
1x PCI Express x1,
1x miniPCI Express
Input voltage of 19V DC, max. 4.5A with input power
delimitation
Ethernet
1x Gigabit Ethernet 10/100/1000 BaseT,
1x 10/100 BaseT
Output 5V, 7A and 12V, 2A
Mass Storage
Interface
1x SATA,
1x EIDE
1x CompactFlash Socket
Size 68 mm x 95 mm x 12.5 mm
I/O
4x USB at the front panel, 1x USB pin header
4x COM (1x front panel, 2x RS232 10 pin header, 1x TTL)
1x LPT, PS/2 Keyboard and Mouse,
on board system speaker
conga-SBM 2-Kit
Sound
Line In, Line Out, Mic In at front panel
Video
Analog VGA on front panel
LVDS interface (EPI - Embedded Panel Interface) 34 pin 2 mm header
Backlight connector, 10 pin 2.54 mm header
CMOS battery
on board lithium battery for CMOS backup and real time clock
Battery Support
all signals for ACPI battery support (conga-SBM²) at the feature connector
Power
ATX standard power connector
Fan
3 pin header, 12 V and tacho signal
Temperature
Operating: 0 .. +60°C
Storage: -20 .. +80°C
SMART Battery
Humidity
Operating: 10 - 90% r. H. non cond.
Storage: 5 - 95% r. H. non cond.
Complete set of cables required for testing in conjunction
with the conga-XEVAL evaluation carrier board
Size
170 x 170 mm² (6.7" x 6.7")
conjunction with the congatec XTX™ starter
kit. When used together they provide a
fast and simple way of evaluating all
the functionalities and configurations
offered by the XTX™ and SBM2 modules.
Contents:
SMART Battery Manager Module conga-SBM2
39
Qseven
COM Express
This battery manager kit can be operated in
XTX / ETX
Battery charging max. 17V, max. 3A
Technology
SMART Battery Manager
Module
w w w.congatec.com
XTX™ - Engineering Tools
conga-Xdebug
Cooling Solutions
XTX™ Debug Platform. The conga-Xdebug provides a de-
congatec cooling solutions are available for all XTX™
bug platform for your application specific carrier board.
modules.
Simply use it as a transparent debug interface between
your carrier board and the XTX™ module.
Postcode Display for LPC or PCI
LPC Firmware Hub Flash (FWH)
1x SATA Connector
Heatspreader
Active cooling solution
Passive cooling solution
Thermal stacks
Power connector for carrier board independant operation
VGA / Keyboard / Mouse / COM / USB
Power and Reset Buttons
LED`s
• 4x GPIO Status
• 4x Command Byte Enable (CBE) for PCI Bus activity
Size: 95 x 114 mm2
40
congatec
Technology
conga-LDVI
conga-FPA2
Evaluation Platform to convert SDVO to DVI-D. The
DVI Converter Module for LVDS
conga-FPA2 is a universal flat panel adapter board that
features found on most of congatec`s XTX™ modules.
It`s fully supported by the congatec Embedded BIOS.
SDVO to 2x DVI-D
• 2x Chrontel CH7307C
has been designed to be EPI (Embedded Panel Interface)
Compact module to convert LVDS to DVI-D. It can be used
with either Qseven™, XTX™ or COM Express™ modules. It’s
now possible to realize a dual port DVI-D system indepent of
the typical Video Output Ports (SDVO or DVO).
compliant. It can be used for either prototyping, demonstration purposes, or for debugging certain issues. It may
also serve as a reference for the implementation of panel
adaptations on customer specific carrier boards.
Multiple I/O Combinations
LVDS to TTL
18 and 24 Bit single-pixel support
18 and 24 Bit single / dual-pixel support
Configuration Memory
EPI compliant EEPROM for custom panel settings
Power Management
All typ. supply voltages selectable
Fully s/w controlled power sequencing
COM Express
conga-XDVI provides the ability to evaluate the SDVO
Qseven
conga-XDVI
Backlight Connector: Supports most backlight converters
XTX / ETX
Software controlled brightness adjustment
41
w w w.congatec.com
ETX® - the concept
ETX® was one of the very first Computer-On-Module concepts ever. It was defined in 1998 by JUMPtec as an open
standard. ETX® is a well established and highly successful standard. It offers most standard PC I/O’s on a compact
form factor.
PCI Bus
Graphic Interfaces
Upgrade to XTX™
The 32 bit parallel PCI bus can be utilized to
control multiple I/O devices on the customized
carrier board.
Most ETX® modules are equipped with onboard
graphic controllers. Displays or monitors can be
connected using VGA and LVDS signals. Some
modules offer direct TTL signals as an alternative
to LVDS.
Applications which do not utilize the ISA bus can
directly upgrade to XTX modules. The signals at
connectors X1, X3 and X4 are equal to ETX®.
Only the signals at the X2 connector have been
redefined in order to support PCI Express, SATA,
LPC and more. Existing ETX® carrier boards can
easily be upgraded to take advantage of these
new and fast interfaces.
ISA Bus
The ISA bus is mainly used for slow speed devices.
Audio
Most ETX® modules offer onboard audio features.
The ETX® specification defines a mono microphone input and stereo line in and line out
analog signals.
High Speed USB
Heatspreader
ETX® defines a heatspreader that covers the
complete top side of the module and acts as a
thermal interface to the cooling solution within
the application. All heat generating components
are thermally conducted to the heatspreader in
order to avoid hot spots.
ETX® offers four USB 2.0 ports.
I²C Bus
Many embedded devices such as sensors,
converters or data storage can be connected to
the I²C bus interface. Due to the simple protocol
and the high availability of devices, the I²C Bus
is a frequently used low speed bus interface in
embedded applications. congatec understands
this and therefore has chosen to offer 400 kHz
multi-master I²C bus that provides maximum I²C
bandwidth.
Ethernet
A 10/100 MBit Ethernet controller is already implemented at the ETX® module. All signals are connected to the customized carrier board utilizing
the high density board to board connectors.
ISA Bus
X2
X1
PCI Bus
4x USB 2.0
Mic In (Mono)
Line In (Stereo)
Line Out (Stereo)
EIDE 1+2
Ethernet
SM Bus
I²C Bus 400 kHz
Speaker
Power Control
Power Management
VGA
TV-Out
LCD (LVDS or TTL)
COM1+2
IrDA
LPT/Floppy (shared)
X4
X3
42
congatec
conga - ELX
conga - E855
conga - ELX eco
Formfactor
ETX® Rev. 2.7
ETX® Rev. 2.7
ETX® Rev. 2.7
Processor
AMD Geode™ LX800
500 MHz
128 kByte L2 cache
Intel Celeron™ M 600 MHz
up to
Intel® Pentium® M 725 1.6 GHz
AMD Geode™ LX800
500 MHz
128 kByte L2 cache
Chipset
AMD Geode™ CS5536
Intel® 852GM / ICH4
Intel® 855GME / ICH4
AMD Geode™ CS5536
DRAM
max. 1 GByte DDR333
max. 1 GByte DDR333
up to 256 MByte DDR onboard memory
Mass storage
1x EIDE
1x CompactFlash Socket
2x EIDE
1x EIDE
1x CompactFlash Socket
Bus
ISA, PCI, I²C
ISA, PCI, I²C
ISA (via PCI2ISA Bridge), PCI, I²C
Ethernet
10 / 100 BaseT
10 / 100 BaseT
10 / 100 BaseT
I/O
4x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
4x USB 2.0
Floppy / LPT
2x COM (TTL)
Keyboard / Mouse
4x USB 2.0
LPT
2x COM (TTL)
Keyboard / Mouse
integrated, EPI support
integrated, EPI support
254 MByte
64 MByte
254 MByte
Panel Interface
CRT / LVDS 1x18 /
TTL / TV- Out
CRT / LVDS 2x24 / DVO
CRT / LVDS 2x18
max. FP Resolution
1024x768
1600x1200
1024x768
AC'97 Rev. 2.2
Line In, Line Out, Mic
AC'97 Rev. 2.2
Line In, Line Out, Mic
AC’97 Rev. 2.2
Line In, Line Out, Mic
APM 1.2
ACPI 2.0
APM 1.2
APM 1.2
Board Controller
Board Controller
Board Controller
Audio
Power Management
Others
XTX / ETX
integrated, EPI support
max. Memory
Graphics
43
®
COM Express
ETX ®
Qseven
Technology
ETX® - Product Overview
w w w.congatec.com
conga-E855
Full Featured ETX®
Full Featured Economy Model
Formfactor
ETX® Spec 2.7
CPU
Intel® Celeron® M 373 1.0 GHz, ULV, 512 kByte cache, FSB 400 MHz
Intel® Celeron® M 600 MHz, ULV, 512 kByte cache, FSB 400 MHz (eco version, with Intel® 852 GM chipset)
DRAM
SO-DIMM DDR333/PC2700 max. 1 GByte
Chipset
Graphics & Memory Controller Hub: Intel® 855 GME I/O Controller Hub: Intel® 82801DB (ICH4)
I/O Controller: Winbond 83627HG Ethernet PHY: Intel® 82562
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
2x Serial ATA®, 2x EIDE (UDMA-66/100), 4x USB 2.0 (EHCI), PCI Bus Rev. 2.2, ISA Bus, LPC Bus, I²C (Fast Mode, 400 kHz, Multi Master),
Floppy (Shared with LPT), LPT (EPP/ECP, Shared with Floppy), 2x COM Ports TTL Level, 1x IrDA Port, PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 Compatible, Line In, Line Out, Mic In
Graphics
3D Video Controller, Intel® Extreme Graphics®, max. 64 MByte 64 Bit UMA Video RAM (DVMT)
Two independent pipelines for full dual view support
Motion Video Support
Motion Compensation, Subpicture Support
Flat panel Interface
112 MHz LVDS Transmitter, Supports all 1x18, 2x18, 1x24, 2x24 Bit, VESA- and openLDI-Mappings,
Resolutions 640x480 up to 1600x1200
Automatic Panel Detection via EPI, (Embedded Panel Interface, based on VESA EDID™ 1.3)
CRT Interface
350 MHz RAMDAC. Resolutions up to 2048x1536 @ 60 Hz (QXGA), incl. 1920x1080 @ 85 Hz (HDTV)
AUX Output
Intel® compliant DVO Port (12 Bit), Supports external DVI, up to 165 MHz Pixelclock (UXGA)
TV Out
Optional via DVO port
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics,
BIOS Setup Data Backup, I²C Bus (Fast Mode, 400 kHz, Multi Master) 400 kHz, Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control (Backlight Control), Serial Port Console Redirection, for Remote Setup and Installation
Flash Update, Based on AMIBIOS8®
Power Management
ACPI 2.0 with Battery Support, APM 1.2
Operating Systems
Microsoft® Windows® XP, Windows® 2000, Windows® XP Embedded, Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application 6.5W @ 5V , (0.6 GHz Celeron® M) see manual for full details , CMOS Battery Backup
Temperature
Operating: 0 .. +60°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
Featuring Intel® Pentium® M
up to 1.6 GHz
ACPI Battery Support,
Flat Panel detection ...
ETX
®
Storage: -20 .. +80°C
Storage: 5 - 95% r. H. non cond.
44
conga-ELX
Formfactor
ETX® Spec 2.7
Low power consumption
CPU
AMD Geode™ LX 800 Processor, 400 MT/s memory bus speed, 128 kByte L2 Cache
DRAM
SO-DIMM PC2700 up to 1 GByte
Chipset
Companion Device: AMD Geode™ CS5536 Ethernet: Davicom DM9102D
I/O Controller: Winbond 83627HG Audio Codec: ALC203
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
1x EIDE (UDMA-66/100), primary, 1x IDE (PIO mode only), secondary 1x CompactFlash Socket onboard, 4x USB 2.0 (EHCI),
PCI Bus Rev. 2.1, ISA Bus, I²C (Fast Mode, 400 kHz, Multi Master), Floppy (Shared with LPT), LPT (EPP/ECP, Shared with Floppy),
2x COM Ports TTL Level, 1x IrDA Port, PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 compatible, Line In, Line Out, Mic In
Graphics
Integrated in chipset up to 254 MByte graphic memory (UMA)
Motion Video Support
H/W Up- and Downscaling, High Definition digital video support, alpha blending and color keying
Flat panel Interface
68 MHz LVDS Transmitter Automatic Panel Detection via EPI Embedded Panel Interface based on
VESA EDID™ 1.3 1x18 Bit TFT resolutions 320x240 up to 1024x768 optional direct TTL interface
CRT Interface
350 MHz RAMDAC Resolutions up to 1920x1440x32bpp @ 85 Hz 1600x1200x32bpp @ 100 Hz
TV Out
Optional onboard TV encoder supports HDTV (420p, 720p and 1080i) supports component- and
s-video signals on ETX X3 connector
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control (Auto Detection, Backlight Control), Flash Update,
Based on Insyde XpressROM
Power Management
APM 1.2
Operating Systems
Microsoft® Windows® XP, 2000, Microsoft® Windows® XP embedded, Microsoft® Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application 5W @ 5V, see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C Storage: -20 .. +80°C
Humidity
Operating: 10 - 90% r. H. non cond.
Storage: 5 - 95% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
congatec
Eco Model
Technology
Featuring AMD® Geode® LX800
Qseven
Up to 1 GByte DRAM
COM Express
XTX / ETX
ETX
®
45
w w w.congatec.com
conga-ELXeco
On-board DRAM
Eco version
Formfactor
ETX® Spec 2.7
CPU
AMD Geode™ LX 800 Processor, 400 MT/s memory bus speed, 128 kByte L2 Cache
DRAM
Up to 256 MByte onboard DDR memory
Onboard DRAM
Chipset
Companion Device: AMD Geode™ CS5536 Ethernet: Davicom DM9102D
I/O Controller: Winbond 83627HG Audio Codec: ALC203
Featuring AMD® Geode® LX800
Ethernet
IEEE 802.3u 100Base-Tx, Fast Ethernet compatible
I/O Interfaces
1x EIDE (UDMA-33), 1x CompactFlash Socket onboard, 4x USB 2.0 (EHCI), PCI Bus Rev. 2.1,
ISA Bus generated by PCI2ISA bridge, I²C (Fast Mode, 400 kHz, Multi Master), LPT (EPP/ECP)
2x COM Ports TTL Level, x IrDA Port, PS/2 Keyboard, Mouse
Sound
AC‘97 Rev.2.2 compatible, Line In, Line Out, Mic In
Graphics
Integrated in chipset up to 254 MByte graphic memory (UMA)
Motion Video Support
H/W Up- and Downscaling, High Definition digital video support, alpha blending and color keying
Flat panel Interface
68 MHz LVDS Transmitter Automatic Panel Detection via EPI Embedded Panel Interface based on VESA EDID™ 1.3
1x18 Bit TFT resolutions 320x240 up to 1024x768
CRT Interface
350 MHz RAMDAC Resolutions up to 1920x1440x32bpp @ 85 Hz 1600x1200x32bpp @ 100 Hz
congatec Board Controller
Multi Stage Watchdog, Non-volatile User Data Storage, Manufacturing and Board information, Board Statistics
BIOS Setup Data Backup, I²C (Fast Mode, 400 kHz, Multi Master), Power Loss Control
Embedded BIOS Features
OEM Logo, OEM CMOS Defaults, LCD Control (Auto Detection, Backlight Control), Flash Update,
Based on Insyde XpressROM
Power Management
APM 1.2
Operating Systems
Microsoft® Windows® XP, 2000, Microsoft® Windows® XP embedded, Microsoft® Windows® CE 5.0/6.0, LINUX, QNX
Power Consumption
Typ. application 5W @ 5V, see manual for full details, CMOS Battery Backup
Temperature
Operating: 0 .. +60°C Storage: -20 .. +80°C
Humidity
Operating: 10 - 90% r. H. non cond.
Storage: 5 - 95% r. H. non cond.
Size
95 x 114 mm² (3.7" x 4.5")
ISA bus provided by PCI2ISA bridge
ETX
®
46
congatec
Technology
ETX® - Engineering Tools
conga-FPA2
Cooling Solutions
Evaluation Board for ETX® modules. To achieve a quick start
conga-FPA2 is a universal flat panel adapter board that
congatec cooling solutions are available for all
with ETX® congatec offers an evaluation carrier board, which
has been designed to be EPI (Embedded Panel Interface)
ETX® modules.
routes all the ETX® signals to standard interface connectors.
compliant. It can be used for either prototyping, demon-
With this you‘re able to check out all of the ETX® features and
stration purposes, or for debugging certain issues. It may
your specific expansions immediately.
also serve as a reference for the implementation of panel
adaptations on customer specific carrier boards.
10/100 Ethernet
LVDS, TVout
Multiple I/O Combinations
LVDS to TTL
18 and 24 Bit single-pixel support
Thermal stacks
Configuration Memory
EPI compliant EEPROM for custom panel settings
4x USB
Power Management
all typ. supply voltages selectable
fully s/w controlled power sequencing
2x IDE (master/slave)
Backlight Connector: Supports most backlight converters
Audio
• Line In/Out (stereo)
• Mic In (mono)
Software controlled brightness adjustment
XTX / ETX
CompactFlash
Active cooling solution
COM Express
1x PS/2 Keyboard & Mouse
Heatspreader
Passive cooling solution
ISA Bus 3 Slots, PCI Bus 4 Slots
1x LPT, 2x COM
Qseven
conga-EVAL
47
w w w.congatec.com
Headquarter:
Subsidiaries:
congatec AG
congatec AG Asia Pacific
congatec, Inc.
congatec s.r.o.
Auwiesenstraße 5
94469 Deggendorf,
Germany
11F-2, 341, Sec 4,
Zhong Xiao E. Rd.
106 Taipei City, Taiwan
2187 Newcastle Ave, Suite 201
Cardiff by the Sea,
CA 92007 USA
Brojova 16
PSČ 326 00 Plzeň
Czech Republic
Phone +49 (991) 2700-0
Fax
+49 (991) 2700 -111
Phone +886 2 2775 4645
Fax
+886 2 2775 3263
Phone +1 760-635-2600
Fax
+1 760-635-2601
[email protected]
www.congatec.de
[email protected]
www.congatec.tw
[email protected]
www.congatec.us
w w w.c o n g a t e c . c om
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement