Triton FT5000 Installation Instructions

Triton FT5000 Installation Instructions
SITE PREPARATION/INSTALLATION
EXTERIOR WALL DIMENSIONS
The following illustrations show the nominal wall area dimensions required for
installation. Wall opening dimensions have a plus/minus (+/-) 1/4" tolerance.
The height of the opening is from exterior sidewalk level to the base of the
opening to comply with Federal ADA requirements.
D imensions of Wall Opening
H eight
Width
H eight (from exterior
ground)
29 - 5/8"
(751 mm)
21 - 3/4"
(552 mm)
31 - 1/8"
(789 mm)
Wall
Floor - exterior
Note
Dimensions listed comply with US Federal ADA Guidelines. For USA
installations, check for additional guidance. For non-USA installations,
check regulations relating to the country of install.
25
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement