CAN-2054D spec eng
Digital Input and Output Module of DeviceNet Slave
CAN-2054D
The CAN-2054D follows DeviceNet specification Volume I/II, Release 2.0. User can access the
digital I/O status and set the configuration via DeviceNet EDS file. This module has 8-channel
isolated sink/source input and 8-channel isolated sink output. It can be applied to various applications,
such as PNP, NPN, TTL, relay contact and so forth. By the DeviceNet masters of ICP DAS, you can
quickly build a DeviceNet network to approach your requirements.
I/O Pin & Wire Connection
DeviceNet general I/O slave devices
Comply with DeviceNet specification Volume I,
Release 2.0 & Volume II, Release 2.0, Errata 5
Group 2 Only Server (non UCMM-capable)
Support Predefined Master/Slave Connection Set
Connection supported:
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O connection
Support DeviceNet heartbeat and shutdown messages
Provide EDS file for DeviceNet master interface
Internal I/O Structure
CAN Pin & Baud Rate Rotary
Baud rate
rotary switch
3-29
CAN Interface
DeviceNet Specification
DeviceNet subscribe
Connection supported
Node ID
Baud Rate (bps)
Heartbeat/Shutdown message
Terminator Resistor
Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5
Group 2 Only Server
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
0~63 selected by rotary switch
125 kbps, 250 kbps, 500 kbps
Yes
Switch for 120 Ω terminator resistor
Digital Input
Channels
On Voltage Level
Off Voltage Level
Input Impedance
8 (Sink/Source)
+3.5 ~ +30 VDC
+1 VDC Max.
3 kΩ, 0.3 W
Digital Output
Channels
Load Voltage
Output Max Load Current
Output Type
8 (Sink)
+5 ~ +30 VDC
700 mA per channel
Open Collector
LED
Round LED
PWR LED, NET LED, MOD LED
8 LEDs as Digital Output, 8 LEDs as Digital Input, and 1 LED as terminal
resister indicator
I/O LED
Power
Input range
Power Consumption
Unregulated +10 ~ +30 VDC
1.5 W
Mechanism
Installation
Dimensions
DIN-Rail
32.3 mm x 99 mm x 77.5 mm (W x L x H)
Environment
Operating Temp.
Storage Temp.
Humidity
-25 ~ 75 ℃
-30 ~ +80 ℃
10 ~ 90% RH, non-condensing
Applications
Ordering Information
CAN-2054D
The DeviceNet module of 8-channel Digital Input and 8-channel Digital Output
3-30
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement