SIMATIC HMI Panels
Engineered
with
TIA Portal
SIMATIC HMI Panels
Efficient to a new level
siemens.com/hmi
The TIA Portal represents the intuitive,
efficient and proven engineering framework
for all automation tasks.
“I don’t compromise when
it comes to operation and
monitoring. This is why I
rely on the equally proven
and innovative solutions by
the world market leader –
for all applications.”
New productivity benchmarks
for sustainable competitive advantages
Against the background of increasing global competition,
the consistent utilization of all optimization potentials
throughout the entire lifecycle of a machine or plant
has never been more important than today. Optimized
processes facilitate reduced total cost of ownership,
minimized time-to-market and enhanced quality.
Totally Integrated Automation is perfectly attuned to
meet these targets while also being open for international
standards and third-party systems. With its special system
characteristics, Totally Integrated Automation supports
the entire lifecycle of a machine or plant.
SIMATIC, the world’s leading automation system,
represents a core component of Totally Integrated
Automation and comprises a multitude of standardized,
flexible and scalable products. For example: SIMATIC
operator panels, which are presented in this brochure.
The integrated engineering framework
for controllers, HMI and drives: TIA Portal
With the Totally Integrated Automation Portal
(TIA Portal), Siemens offers an engineering framework
which facilitates the implementation of automation
solutions in all sectors worldwide. From automation
system planning, commissioning, operation and
maintenance down to expansion – the TIA Portal
offers significant saving potentials in terms of
engineering time, costs and expenditures.
Find out more
www.siemens.com/tia-portal
2
TIA Portal
Highest requirements in terms
of performance and functionality?
•Brilliant wide-screen displays from 4“ to 22“
•Innovative commissioning and service concept
•Energy management with PROFIenergy
Comfort Panels
Cost-efficient,
high-resolution
visualization solutions?
•Intuitive operation
from 4“ to 12“
•Integrated HMI
basic functionality
•Perfect interaction
with SIMATIC S7-1200
En
gin
eer
Basic Panels
ed
wit h
Mobile Panels
Key Panels
Flexible expandability by keys
– or even safety functions?
•Rapid commissioning
•Easy networking
•Intuitive state detection
Maximum mobility
and flexibility?
•Innovative operation,
wired or wireless
•Ruggedness for
on-site operation
•Integrated
safety concept
l
ta
or
P
n
atio
m
o
t
Au
Totally Integrated
SIMATIC HMI Panels
First choice for efficient operation and monitoring
SIMATIC HMI Panels have been tried and tested in the
most various applications throughout all sectors for
years. They not only feature an innovative design and
high performance – as a unique highlight, they can be
configured via SIMATIC WinCC in the TIA Portal. Users can
thus benefit from unprecedented engineering efficiency.
Integrated functionality across all display sizes
The hardware’s functionality is identical throughout a
device range. Simply select the optimum display size for
your application and choose between operation via touch
screen and/or keys. As the software is scalable, you can
start with a small solution and further expand it any time
as required – for example by increasing the number of tags
or variables.
Innovative graphical user interfaces open up completely
new possibilities in terms of intuitive operation and monitoring.
Unique engineering efficiency
SIMATIC HMI Panels can be intuitively configured in the
TIA Portal via the scalable SIMATIC WinCC software. This
results in increased engineering efficiency when further
components from the Totally Integrated Automation
portfolio are used – e.g. SIMATIC controllers. The perfect
interaction with STEP 7 does away with multiple entries
and ensures maximum data consistency.
Long-term value maintenance
SIMATIC products facilitate long-term investment protection.
Existing projects can be easily and directly migrated to
the successor product. Following the phase-out period of
a model range, we support you with long-term spare parts
availability. Moreover, the matching accessories for each
product are available throughout the entire product lifecycle.
Integrated functionality across all display sizes
• SIMATIC HMI Comfort Panels:
First choice for demanding applications
• SIMATIC HMI Basic Panels:
Basic functions for simple HMI applications
• SIMATIC HMI Mobile Panels:
Power and safety in your hands
• SIMATIC HMI Key Panels:
Innovative operator panels – for turnkey operation
The TIA Selection Tool helps you to select
the suitable device for your application
www.siemens.com/tia-selection-tool
Convince yourself of our HMI portfolio in practical applications
www.siemens.com/hmi-success-stories
Find out more
www.siemens.com/hmi
HMI Panels
3
SIMATIC HMI
Comfort Panels
First choice for
demanding HMI tasks
Various display sizes – identical functionality
Efficient energy management
All SIMATIC HMI Comfort Panels consistently offer
the same high-end functionality. Featuring highresolution wide-screen displays from 4“ to 22“,
optionally with touch or key operation, they can be
optimally adjusted to any application. Furthermore,
they offer numerous innovations:
The standardized PROFIenergy protocol supports
the coordinated central disconnection of redundant
energy loads and the detection of measured energy
values. This facilitates disconnection of the Comfort
Panels’ displays even during short break times for reduced
energy consumption. PROFINET as a standard facilitates
easy integration in existing plant structures and offers
high investment protection.
Flexible high-resolution displays
With up to 40% more visualization space, the widescreen format offers extended display options for
complex operating screens – and a clear differentiation
between application monitoring and operation. The
high resolution with 16 million colors facilitates detailed
process visualization and optimum readability. Together
with the wide reading angle of 170°, this ensures optimum readability. The displays’ high brightness is 100 %
dimmable to allow for optimum adjustability to individual
requirements – this is for example important for applications on ships and ensures reduced energy consumption.
New innovative graphical user interface
A new, innovative graphical user interface opens up
completely new possibilities in terms of intuitive
machine operation and monitoring.
Integrated high-end functionality
SIMATIC HMI Comfort Panels are characterized by their
high performance which amongst others ensures rapid
image build. Irrespective of the display size, all devices
offer archives, VB scripts and various viewers for the
display of plant documentation (e.g. as PDF) and Internet
websites. The system diagnostics options in interaction
with SIMATIC controllers represent an innovation.
Diagnostics information which could previously only be
obtained via programming device can now be read out
via the Comfort Panel.
* To fully ensure the retention of individual, not yet archived data,
the use of an uninterruptible power supply unit is recommended
4
Maximum data security if power fails
In case of a power failure, Comfort Panels buffer sufficient
energy to correctly terminate all active archives and to
back up the data already archived in RDB format. This
ensures the retention of all data in the archive in a
cost-efficient manner and without the use of a maintenance-intensive battery.*
Suitability for harsh environments
The rugged SIMATIC HMI Comfort Panels come with
numerous approvals for application in various countries
and for use in sectors subject to increased requirements.
From 7“ upward, the devices are equipped with particularly durable aluminum die-cast fronts. All Comfort Panels
are approved for application in explosive areas in accordance with UL CL.I, Div.2. Furthermore, devices up to 12“
are certified for Zones 2 and 22 in accordance with ATEX
and offer various marine approvals such as GL or ABS.
Integrated interfaces
SIMATIC HMI Comfort Panels are suitable for integration in
PROFINET and PROFIBUS networks and feature interfaces
for the connection of USB I/O. From 7“ upwards, the
devices come with a 2-port Ethernet switch and from 15“
upwards with an additional Gigabit PROFINET interface.
Eased project transfer
Standard cables can be used for loading HMI projects
via PROFINET / Ethernet or USB – no special cables are
required. Device settings are made during configuration,
additional settings on the device itself are done away
with. This ensures eased commissioning. The project data
and device settings are saved to a system card integrated
in the device and automatically updated. The system card
can be used for project transfer to a further device.
New: Monitoring with network cameras
The download option plant monitoring via network
camera and camera control allows for:
• Monitoring of multiple remote processes on
the Comfort Panel
• Monitoring of difficult-to-access areas
• Documentation and saving of machine states
Camera control download via:
www.siemens.com/comfort-panels
Printing and documentation
• Paperless printing in PDF / HTML format
• Screenshots for rapid documentation
• Archiving of process values and reports
Extremely flexible for any outdoor application
For extreme ambient conditions, e.g. in cold storage
warehouses, on ships or in oil and gas applications,
SIMATIC HMI Outdoor Panels are in preparation. They
offer:
• Rugged and durable UV-protected device front (IP65)
• Non-reflecting 7- und 15-inch wide-screen displays with
automatic dimming for use in all light conditions
• Location- and sector-independent applicability through
wide temperature range from –30°C to +60°C with max.
90% humidity and comprehensive certifications
Highlights
• Device variety from 4“ to 22“,
with touch screen and/or control keys
• Brilliant displays in widescreen format
• All touch devices also support vertical installation –
for optimum plant space utilization or for special
machine designs
• Integrated high-end functionality:
Archives, VB scripts and various viewers for plant
documentation display – e.g. as PDF or in the form
of Internet websites as standard
• Maximum data security
• Easy commissioning, rapid service
• Integrated system diagnostics
• Cross-sector and cross-regional applicability
• Multiple interfaces for process communication
• Integrated PROFINET switch from 7“
Migration made easy
Opt for SIMATIC HMI systems of the latest generation
to make your HMI applications even more efficient.
Further information:
www.siemens.com/panel-innovation
Find out more
www.siemens.com/comfort-panels
SIMATIC HMI Comfort Panel Starter Kits
www.siemens.com/comfort-panels-starter-kits
Comfort
Panels
5
SIMATIC HMI
Basic Panels
2nd Generation
Cost-efficient, high-resolution
visualization solutions
Improved process quality
Visualization allows for considerably increased process
quality with compact plants or smaller applications.
Featuring all important HMI basic functions, SIMATIC
HMI Basic Panels 2nd Generation thus open up completely
new possibilities in terms of operation and monitoring
also in the field of mechanical engineering at a particularly attractive price.
High-resolution wide-screen displays
SIMATIC HMI Basic Panels 2nd Generation are available
with high-resolution wide-screen displays from 4“ to
12“. These also support vertical configuration. Their high
resolution and color depth of 64,000 colors facilitate
improved process visualization. The displays’ brightness
is dimmable up to 100 %, offering optimum flexibility.
Innovative graphical user interface
The new innovative user interface provides a great variety
in terms of experiencing and operation. The new SIMATIC
HMI Basic Panels feature user-friendly touch screens and
particularly handy, freely configurable keys.
Highlights
• Ideal entry-level range for simple HMI applications
• Installation compatibility with SIMATIC HMI Comfort
Panels and existing SIMATIC HMI Basic Panels 4“ and 6“
• Flexible scalability within the HMI range
• High-resolution, dimmable wide-screen displays
with 64,000 colors
• Innovative user interface and improved usability
thanks to new controls and graphics
• Touch / key functionality for intuitive operation
• Interface for connection with various PLCs
• Versions for PROFIBUS and PROFINET
• Archiving via USB stick
• Engineered in the TIA Portal
Improved usability
The new USB interface facilitates the connection of
keyboard, mouse or barcode scanner and supports easy
data archiving on a USB stick.
Perfect interaction
Thanks to a PROFIBUS or PROFINET interface, SIMATIC
HMI Basic Panels 2nd Generation allow for connection
with various PLCs. The visualization of applications of
the modular compact controller SIMATIC S7-1200 offers
particularly great added value.
Find out more
www.siemens.com/basic-panels
6
Basic
Panels
SIMATIC HMI
Mobile Panels
2nd Generation
Power and safety
in your hands
Irrespective of sector or application: Mobile operator panels – both wired and wireless – offer decisive advantages
when mobility is required for the on-site operation and
monitoring of machines and plants.
Highlights SIMATIC HMI Mobile Panels 2nd Gen.
Wired: SIMATIC HMI Mobile Panels 2nd Generation
• Optimum usability through illuminated E-STOP button
Efficient engineering – the basis for perfect design and
operation. Engineering in the TIA Portal allows for a faster
and easier creation of your visualization than ever before.
Using the innovative Style Editor, the operating screens
can now both be configured for stationary as well as
mobile applications. The user selects the new Mobile
Panel and creates its configuration, incl. the specific
functions for mobile application such as connection
point detection or safety operator control evaluation.
• Flexible evaluation option for safety operator controls
Performance and brilliance for mobile high-end
applications
The Mobile Panels’ high performance and high-end functionality allow for the realization of demanding mobile
applications. The 7” or 9” wide-screen display is 100%
infinitely dimmable and can be adjusted to various environments. It offers razor-sharp, bright and detailed
images in 16 million colors and also supports the representation of complex operating screens or graphics thanks
to its 40% increased display size.
On the safe side – with safety
The Mobile Panels can be configured for alternation of
the corresponding user interface according to connection
point. Machine-specific HMI authorizations or actions can
be realized independently of the selected connection
point via the connection box ID. PROFINET connection
boxes can be connected in series via integrated switches.
• Permanently wired safety relays (e.g. SIRIUS 3SK1)
• Fail-safe I/Os (e.g. SIMATIC ET 200)
• PROFIsafe with fail-safe controllers
(e.g. SIMATIC S7-1500F)
• Connection point detection for location-dependent
operator functions
• Extended connection options through connection
boxes (compact, standard, advanced)
Compact connection option
The new connection box compact requires only one third
the space of the normal connection box. It is simply
screwed onto the control cabinet door’s outside and then
completely wired from the inside. It can be virtually
accommodated anywhere on the machine or plant, thanks
to which connections for the Mobile Panels can always be
installed at the ideal position for the operator.
Wireless: SIMATIC HMI Mobile Panel 277 IWLAN
The SIMATIC HMI Mobile Panel 277(F) IWLAN represents
a rugged operator panel for wireless applications with
optional safety functionality. It offers:
• Maximum flexibility for mobile operation and monitoring through Industrial Wireless LAN (IWLAN)
• High safety according to SIL 3 or PL e
• Consistently integrated safety in interaction with
SIMATIC fail-safe controllers
Highlights SIMATIC HMI Mobile Panels 277 IWLAN
• Large field of action through use of multiple access
points (with iPCF, rapid roaming)
• Location-dependent operator functions which
can be enabled via transponder
• E-STOP and acknowledgement button for wireless
applications
Find out more
www.siemens.com/mobile-panels
Mobile
Panels
7
SIMATIC HMI
Key Panels
Innovative operator panels
for up to 60 % time savings
in terms of mounting
The compact SIMATIC HMI Key Panels replace
conventional operator panels at a way more costfavorable price. Thanks to the devices’ turnkey preassembly, they support time savings of up to 60 % in
terms of mounting.
Flexible mounting and service
The devices are dimensioned for direct switchboard
installation and can also be mounted to third-party
support arm and stand systems as a standard by means of
flexible mechanics. This supports their optimum use on
machines in any application – for ergonomic operation at
various points of plants or production lines.
As power supply and bus cables are directly looped
through on the Key Panel, no separate terminals are
required. Furthermore, the F-versions support the direct
connection of E-STOP devices or safety-related sensors,
which further minimizes the wiring expenditures.
Highlights
• Large mechanical buttons and multi-color LEDs
(daylight-readable
• Maximum flexibility through parameterization options
• Wiring time savings of over 60 % and material cost
reductions of over 30 %
• Easy-to-label keys in IP65
• 2 PROFINET ports (incl. switch) for the assembly of
line and ring structures
• Integrated digital I/Os on the device’s rear for the
connection of key switches, indicator lights, etc.
• Direct connection of E-STOP and other fail-safe
sensors with F-versions
• Functional compatibility with all standard PROFINET
master CPUs (also by third-party manufacturers)
Reduced hardware costs through integrated PROFINET 2-port switch
and support of the shared device functionality KP8 or KP8F
Find out more
www.siemens.com/key-panels
8
Key
Panels
SIMATIC HMI
Devices with
All-Round
Protection
Device versions for
special requirements
Our portfolio of proven SIMATIC HMI operator panels
is supplemented by versions with all-round degree of
protection IP65 for support arm or stand mounting.
The devices are based on standard devices from our
portfolio which have been tried-and-tested in countless
applications worldwide.
Flexible mounting and service
The devices can be mounted to third-party support arm
and stand systems as a standard by means of flexible
mechanics. This supports their optimum use on machines
in any application – for ergonomic operation at various
points of plants or production lines.
Highlights
• Easy support arm or stand mounting
• High service friendliness
• High compactness and low weight
• Easy adjustability and modular expandability,
e.g. with SIMATIC HMI Key Panels KP8 and KP8F
The rear panel’s easy replaceability, also with device
mounting on the machine, ensures outstanding service
friendliness – e.g. for subsequent wiring or replacement
of memory cards. Moreover, the operator panels can
be easily adjusted to various requirements by means of
modular expansion units, e.g. by equipping them with
plant-specific mechanical pushbuttons or E-STOP devices.
The range’s technology is based
on existing installation devices
• SIMATIC HMI IPC477C PRO 15“ and 19“
• SIMATIC Flat Panel Monitor PRO 15“ and 19“
• SIMATIC Thin Client PRO 15“
• SIMATIC MP 377 PRO 15“
High flexibility through IP20 backplane cover concept
SIMATIC Flat Panel Monitor PRO 19“ and HMI IPC477C PRO 15“
with expansion units, incl. SIMATIC HMI Key Panels
IP20 backplane covers with VESA mount are available for
SIMATIC HMI devices with 15”, 19” und 22” wide-screen
fronts. Special covers facilitate rapid and service-friendly
access to interfaces and memory cards in installed state.
Find out more
www.siemens.com/ip65-hmi-devices
All-Round
Protection
9
Customized
Automation
OEM products
Software products and
customized software images
Matched to your
requirements
Turnkey products
Design products
From minor design changes to OEM solutions, down to
turnkey products: Customized products from our SIMATIC
portfolio offer you the high quality and functionality of
our proven SIMATIC products.
Customized design
Our SIMATIC products can be modified in terms of design
to facilitate their seamless adjustment to your individual
machine and plant design and your special operating and
control philosophy. These design products are fully compatible with the standard products with regard to technology
and functionality and are completely integrated in Totally
Integrated Automation.
OEM product modifications
We offer special product modifications for our OEM
customers (original equipment manufacturers) which
support the realization of individual automation solutions
which cannot be implemented with standard products
or devices with design modifications. For this purpose,
we assemble a SIMATIC OEM device from our standard
components, customer-specific components and additionally
required software function expansions – analogous to a
modular system.
Customized turnkey products
These ready-to-install turnkey products are realized exactly
according to your specifications to meet your individual
technical requirements. They are based on our standard
products which are combined and assembled specifically
for you. Turnkey products comprise all wiring, connections,
enclosure solutions and suitable automation components,
including the required software filling with customer-specific
images.
Standard products
Highlights
Time savings
• You benefit from our comprehensive customization
know-how and our long-standing experience.
• You need not acquire any additional know-how and
can fully concentrate on your own core competencies.
Increased profitability
• You benefit from the hardware modifications’ flexible
combinability on the basis of standards, which makes
customized solutions attractive in terms of costs even
for small quantities.
• You determine the optimum cost-performance ratio
for you by specifying the customization type and
scope.
Strengthened competitive advantage
• You rely on SIMATIC products which comply
with the strictest quality standards, offer optimum
performance and thus ensure maximized productivity
and minimum downtimes.
• You are provided with customized products which
can be excellently integrated in Totally Integrated
Automation.
Sector products for typical applications
Customized SIMATIC products can be equipped with
additional characteristics for application in special
industrial sectors.
• Renewable energies
• Automotive industry
• General mechanical engineering
• Food, beverages and tobacco industry /
pharmaceutical industry
• Oil and gas / chemical industry and shipbuilding
10
Find out more
www.siemens.com/customized-automation
Customized
Automation
SIMATIC WinCC
(TIA Portal)
One engineering tool
for all HMI panels
WinCC (TIA Portal) is the software for all HMI
applications – from simple operation solutions with
Basic Panels, down to process visualizations on
PC-based multi-user systems.
Maximum configuration efficiency
WinCC (TIA Portal) facilitates the use of deviceindependent configuration data on various target
systems without conversion. The interface adjusts
itself to the functional properties of the target device.
Joint project data (alarm class, project texts, etc.) are
centrally managed in the TIA Portal and can be used
across different devices. Furthermore, an assistant for
HMI configurations is available independently of the
device which supports the rapid and easy creation of
the visualization’s basic structure.
Image editor for efficient
and fast image configuration
• Generation of interlinked image objects via
drag & drop, e.g. tags for the generation of
input/output fields with process connection
• Definition of image templates and functions
• Layer technology with up to 32 layers
Libraries for configuration objects
• Archiving of all configuration objects – whether
pre-defined or user-defined – in the library, e.g.
of blocks as well as complete images or tags
• Faceplates can be compiled from simple image
objects in a customer- and project-specific manner;
faceplate changes can be effected centrally via
the block definition
Test and commissioning support
• Simulation of HMI projects on the engineering PC
• Marking of incomplete or faulty configurations
directly in the respective editor
• Jump to the fault cause on the basis of the compiler’s
messages
Migration of existing HMI projects
• Complete data import from projects created in
WinCC flexible
Object-oriented data management
• Comfortable search and change options
• Configuration of messages and archives directly on
the HMI tags, no alternation between various editors
• Cross-reference list with direct access to all objects,
e.g. for changes or selection
Find out more
www.siemens.com/wincc-tia-portal
SIMATIC
WinCC
11
Find out more:
www.siemens.com/hmi
SIMATIC
HMI Panels –
take a look
Subject to change without prior notice
Article No.: E20001-A760-P810-V2-7600
Dispo 06333
WÜ/61398 WS 11145.
Printed in Germany
© Siemens AG 2014
The information provided in this brochure contains
merely general descriptions or characteristics of
performance which in actual case of use do not
always apply as described or which may change as
a result of further development of the products. An
obligation to provide the respective characteristics
shall only exist if expressly agreed in the terms of
contract.
All product designations may be trademarks and
product names of Siemens AG or supplier companies
whose use by third parties for their own purposes
could violate the rights of the owners.
Follow us on:
twitter.com/siemensindustry
youtube.com/siemens
More
about
SIMATIC
to go
Siemens AG
Digital Factory
Factory Automation
P.O. Box 48 48
90026 NÜRNBERG
GERMANY
E20001-A760-P810-V2-7400
Engineered
with
TIA Portal
SIMATIC HMI Panels
Technical Data
siemens.com/hmi
Intuitive, efficient, proven:
TIA Portal redefines engineering.
Technology
Overview
Key Panels
The innovative operator panels
KP8 PN
KP8F PN
KP32F PN
8
8
32
Operating mode
Function keys
(programmable)
Output type
Color modes for LED
5
(green, red, yellow, blue, white)
Typical service life
Short-stroke keys
(in switching cycles)
1,500,000
LEDs
(ON period in %)
100%
Interfaces
Digital inputs / outputs¹⁾
8
8
16
Fail-safe inputs SIL2 / SIL3
– / –
2 / 1
4 / 2
PROFINET
2
2
2
Functionality
Key and lamp test
•
Degree of protection
Front / rear
IP65 / IP20
Connection to controller
SIMATIC S7, WinAC
S7-1200
S7-1500
S7-300
S7-400
SIMATIC S5
•
PLC
•
SINUMERIK
•
SIMOTION
•
S7-1200 ²⁾
S7-1500 ²⁾
S7-300 (F)
S7-400 (F)
Engineering software
Configuration
STEP 7 V5.5 or STEP 7 Basic V11 or higher
Ambient conditions
Installation position
portrait or landscape
Max. permissible tilt angle without
forced ventilation (in °)
+ / – 30
Max. relative humidity (in %)
< 90
Temperature
Operation
(vertical installation) in °C
0 … +55
0 … +55
0 … +55
Operation
(max. tilt angle) in °C
0 … +45
0 … +45
0 … +45
Enclosure front
(W x H in mm)
98 x 155
98 x 155
295 x 155
Installation cutout / device depth
(W x H / D in mm)
68 x 129 / 49
68 x 129 / 49
275 x 135 / 39
Article No.*)
6AV3688-3AY36-0AX0
6AV3688-3AF37-0AX0
6AV3688-3EH47-0AX0
Dimensions
*)
Current ordering data as well as terms of sale and delivery are listed in the catalog ST 80 / ST PC and on the Internet at
www.siemens.com/industrymall
Basic Panels
Cost-efficient operation and monitoring of simple applications
2nd Generation
2nd Generation
2nd Generation
2nd Generation
KTP400 Basic
KTP700 Basic DP
KTP700 Basic
KTP900 Basic
KTP1200 Basic DP
KTP1200 Basic
KP300 Basic mono PN
KP400 Basic color PN
Type of operation
4” touch + key
7” touch + key
9” touch + key
12” touch + key
3.6” key
4” key
Display
Wide-screen TFT, 65k colors, LED backlight
Size (in inches)
4.3”
7”
9”
12.1”
3.6”
4.3”
Resolution (W x H in pixels)
480 x 272
800 x 480
800 x 480
1,280 x 800
240 x 80
480 x 272
MTBF⁶⁾ of backlight
(in h)
20,000
20,000
20,000
20,000
50,000
Front dimensions (in mm)
141 x 116
214 x 158
267 x 182
330 x 245
165 x 97
150 x 186
Control elements
touch screen and
tactile keys
touch screen and
tactile keys
touch screen and
tactile keys
touch screen and
tactile keys
membrane keypad
Function keys (programmable) / system keys
4/–
8/–
8/–
10 / –
10 / •
8 / 26
FSTN-LCD black-white
TFT liquid crystal
Usable memory
User memory
10 MByte
10 MByte
10 MByte
10 MByte
1 MByte
Memory for options / recipes⁴⁾
– / 256 KByte
– / 256 KByte
– / 256 KByte
– / 256 KByte
– / 40 KByte
Message buffer
•
•
•
•
•
Serial / MPI / PROFIBUS DP / PROFINET (Ethernet)
– / – / – / •
– / • / • / –
– / – / – / •
– / – / – / •
– / • / • / –
– / – / – / •
– / – / – / •
USB host / USB device
1 / –
1 / –
1 / –
1 / –
–
Slot for CF / multimedia / SD
– / – / –
– / – / –
– / – / –
– / – / –
–/–/–
Interfaces
Functionality (when configured with WinCC TIA Portal)
Alarm logging
(number of alarms / alarm classes)
1,000 / 32
1,000 / 32
1,000 / 32
1,000 / 32
200 / 32
Process screens
100
100
100
100
50
Tags
800
800
800
800
200
250
Vector graphics
• •
•
• •
Bar graphs / curve diagrams
• / f(t)
• / f(t)
• / f(t)
• / f(t)
• / f(t)
Faceplates
–
–
–
–
–
Recipes
50
50
50
50
5
Archiving / Visual Basic Scripts
•/–
•/–
•/–
•/–
–/–
Programming device functions
–
–
–
–
–
Connection to controller
SIMATIC S7 / SIMATIC WinAC
•/•
•/•
•/•
•/•
•/•
SINUMERIK / SIMOTION
•/•
•/•
•/•
•/•
–/–
Allen Bradley / Mitsubishi
•/•
•/•
•/•
•/•
•/•
•/–
Modicon / Omron
•/–
•/•
•/–
•/–
•/•
• / –
•/–
WinCC Basic V13
or higher
WinCC Basic V13
or higher
WinCC Basic V13
or higher
WinCC Basic V13
or higher
WinCC Basic V11
or higher
Engineering software
Configuration
Options, applications
[email protected] / Audit / Logon
– / – / –
– / – / –
– / – / –
– / – / –
–/–/–
OPC Server/ Internet Explorer
– / – – / – – / – – / – –/–
Article No.*)
6AV2123-2DB03-0AX0
6AV2123-2GA03-0AX0
6AV2123-2GB03-0AX0
6AV2123-2JB03-0AX0
6AV2123-2MA03-0AX0
6AV2123-2MB03-0AX0
6AV6647-0AH11-3AX0
6AV6647-0AJ11-3AX0
¹⁾ Freely configurable, ²⁾ Fail-safe if supported by CPUs, ³⁾ RS232 with adapter, ⁴⁾ Integrated flash, expandable via memory card, ⁵⁾ Monitoring mode only for Mobile Panel 277F IWLAN, ⁶⁾
Comfort Panels
High-end functionality for demanding HMI tasks
KTP400 Comfort
KP400 Comfort
TP700 Comfort
KP700 Comfort
TP900 Comfort
KP900 Comfort
TP1200 Comfort
KP1200 Comfort
TP1500 Comfort
KP1500 Comfort
TP1900 Comfort
TP2200 Comfort
4” touch + key
4” key
7” touch
7” key
9” touch
9” key
12” touch
12” key
15” touch
15” key
19” touch
22” touch
Wide-screen TFT, 16 million colors, LED backlight
4.3”
7”
9”
12.1”
15.4”
18.5”
21.5‘’
480 x 272
800 x 480
800 x 480
1,280 x 800
1,280 x 800
1,366 x 768
1,920 x 1,080
80,000
80,000
80,000
80,000
80,000
50,000
30,000
140 x 116
152 x 188
214 x 158
308 x 204
274 x 190
362 x 230
330 x 241
454 x 289
415 x 310
483 x 310
483 x 337
560 x 380
touch screen or
­membrane keypad
touch screen or
­membrane keypad
touch screen or
­membrane keypad
touch screen or
­membrane keypad
touch screen or
­membrane keypad
touch screen
touch screen
4 (with LED) / –
8 (with LED) / •
–/–
24 (with LED) / •
–/–
26 (with LED) / •
–/–
34 (with LED) / •
–/–
36 (with LED) / •
–/–
–/–
4 MByte
12 MByte
12 MByte
12 MByte
24 MByte
24 MByte
24 MByte
4 MByte / 512 KByte
12 MByte / 2 MByte
12 MByte / 2 MByte
12 MByte / 2 MByte
24 MByte / 4 MByte
24 MByte / 4 MByte
24 MByte / 4 MByte
•
•
•
•
•
•
•
• ³⁾ / • / • / 1
• ³⁾ / • / • / 2
• ³⁾ / • / • / 2
• ³⁾ / • / • / 2
• ³⁾ / • / • / 3
• ³⁾ / • / • / 3
• ³⁾ / • / • / 3
1 / 1
2 / 1
2 / 1
2 / 1
2 / 1
2 / 1
2 / 1
–/•/•
–/•/•
–/•/•
–/•/•
–/•/•
–/•/•
–/•/•
2,000 / 32
4,000 / 32
4,000 / 32
4,000 / 32
6,000 / 32
6,000 / 32
6,000 / 32
500
500
500
500
750
750
750
1,024
2,048
2,048
2,048
4,096
4,096
4,096
•
•
•
•
•
•
•
• / f(t), f(x)
• / f(t), f(x)
• / f(t), f(x)
• / f(t), f(x)
• / f(t), f(x)
• / f(t), f(x)
• / f(t), f(x)
•
•
•
•
•
•
•
100
300
300
300
500
500
500
•/•
•/•
•/•
•/•
•/•
•/•
•/•
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL,
diagnostics viewer
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
WinCC Comfort V11
or higher
WinCC Comfort V11
or higher
WinCC Comfort V11
or higher
WinCC Comfort V11
or higher
WinCC Comfort V11
or higher
WinCC Comfort V11
or higher
WinCC Comfort V11
or higher
•/•/•
•/•/•
•/•/•
•/•/•
•/•/•
•/•/•
•/•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
6AV2124-2DC01-0AX0
6AV2124-1DC01-0AX0
6AV2124-0GC01-0AX0
6AV2124-1GC01-0AX0
6AV2124-0JC01-0AX0
6AV2124-1JC01-0AX0
6AV2124-0MC01-0AX0
6AV2124-1MC01-0AX0
6AV2124-0QC02-0AX0
6AV2124-1QC02-0AX0
6AV2124-0UC02-0AX0
6AV2124-0XC02-0AX0
⁾ Brightness reduction by 50%, may be prolongable by means of dimming and ProfiEnergy
Mobile Panels
Power and safety in your hands
2nd Generation
2nd Generation
KTP700 Mobile
KTP700F Mobile
KTP900 Mobile
KTP900F Mobile
Mobile Panel 277 IWLAN V2
Mobile Panel 277 (F) IWLAN V2
7” touch + key
9” touch + key
8” touch + key
Type of operation
Wide-screen TFT, 16 million colors,
LED backlight
TFT display (LCD), 64k colors
Display
7”
9”
7.5”
Size (in inches)
800 x 480
800 x 480
640 x 480
Resolution (W x H in pixels)
50,000
50,000
50,000
MTBF⁶⁾ of backlight
(in h)
248 x 172
248 x 195
307 x 201
307 x 224
diameter 290
Front dimensions (in mm)
touch screen or ­
membrane keypad
touch screen or ­
membrane keypad
touch screen or ­
membrane keypad
Control elements
8 (with LED) / –
10 (with LED) / –
18 / –
Function keys (programmable) / system keys
12 MByte
12 MByte
6 MByte
User memory
12 MByte / 2 MByte
12 MByte / 2 MByte
1,024 KByte / 64 KByte
Memory for options / recipes⁴⁾
•
•
•
Message buffer
–/–/–/1
–/–/–/1
– / – / – / (• via IWLAN)
Serial / MPI / PROFIBUS DP / PROFINET (Ethernet)
1/–
1/–
•/–
USB host / USB device
–/•/•
–/•/•
–/•/•
Usable memory
Interfaces
Slot for CF / multimedia / SD
Functionality (when configured with WinCC TIA Portal)
4,000 / 32
4,000 / 32
4,000 / 32
Alarm logging
(number of alarms / alarm classes)
500
500
500
Process screens
2,048
2,048
2,048
Tags
•
•
•
Vector graphics
• / f(t), f(x)
• / f(t), f(x)
• / • f(t)
Bar graphs / curve diagrams
•
•
•
Faceplates
300
300
300
Recipes
•/•
•/•
•/•
Archiving / Visual Basic Scripts
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL,
diagnostics viewer
STATUS / CONTROL
Programming device functions
•/–
•/–
•/•
SIMATIC S7 / SIMATIC WinAC
•/•
•/•
– / • (Safety variant from Service
Pack 3 for SIMATIC WinCC flexible
2008)
SINUMERIK / SIMOTION
•/•
•/•
–/–
Allen Bradley / Mitsubishi
•/•
•/•
–/–
Modicon / Omron
WinCC Comfort V13 SP1
or higher
WinCC Comfort V13 SP1
or higher
WinCC Comfort V11,
WinCC flexible Standard,
Advanced or higher
Configuration
•/•/•
•/•/•
• / • / – ⁵⁾
[email protected] / Audit / Logon
–/•
–/•
•/•
OPC Server / Internet Explorer
6AV2125-2GB03-0AX0
6AV2125-2GB23-0AX0
6AV2125-2JB03-0AX0
6AV2125-2JB23-0AX0
6AV6645-0..01-0AX1
Article No.*)
Connection to controller
Engineering software
Options, applications
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement