Operator Interface NT2S Powerful and Compact Alphanumeric Operator Interface ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ High visibility LED backlit LCD display shows 2 lines of 16 characters Choose programmable or message display models Compact, fits 1/8 DIN panel cutout Six programmable function keys Two programmable LED indicators Powered by peripheral port or 24 VDC power supply Password protect any function key Bar graph display cCSAus and CE approvals IP65 protection rating Programming software included at no cost Ordering Information Item Part number 2 x 16 character LCD text, 6 function key, RTC, 24 VDC NT2S-SF121B-E 2 x 16 character LCD text, 6 function key, 5 VDC NT2S-SF122B-E 2 x 16 character LCD text message display, 6 function key, 5 VDC NT2S-SF123B-E 9-pin to peripheral port cable, 2 m for SF121 model NT2S-CN212 9-pin to peripheral port cable, 5 m for SF121 model NT2S-CN215 9-pin to peripheral port cable, 2 m for SF122 and SF123 models NT2S-CN222 9-pin to peripheral port cable, 5 m for SF122 and SF123 models NT2S-CN225 NT2S NT2S Specifications ■ FEATURES Features Description NT2S-SF121B-E NT2S-SF122B-E NT2S-SF123B-E Programming package Windows Software Package - NT2ST Yes Yes Not programmable ASCII controlled messages ASCII in PLC registers is displayed on the NT2S No screen. Pointer in PLC memory tells NT2S which register to display. Pointers placed in that PLC register point to data value to be displayed. No Yes Multi-vendor support Omron, Allen-Bradley Micrologix and SLC 5/0x, Yes GE Micro, Modicon, Keyence KV Series, Toshiba T Series, Koyo 305, 405, and DL205 Series No No Memory Type EEPROM 8K 8K Power 24 VDC terminals or PLC peripheral port 5 VDC 24 VDC 5 VDC 5 VDC Enclosure ratings IP65 Yes Yes Yes Standards CE, cCSAus Yes Yes Yes Ambient operating rating 0 to 50°C Yes Yes Yes Storage temperature -20°C to 60°C Yes Yes Yes 8K Ambient operating humidity 35% to 85% with no condensation Yes Yes Yes Ambient operating environment No corrosive gases Yes Yes Yes Weight 400 g Yes Yes Yes Panel fitting 2 clamps Yes Yes Yes Face dimensions mm (inch) Dimensions of NT2S front bezel 109W x 60H (4.29 x 2.36) 109W x 60H (4.29 x 2.36) 109W x 60H (4.29 x 2.36) Rear unit dimensions mm (inch) Dimensions of portion of NT2S that enters panel 91W x 44H x 44D 91W x 44H x 44D 91W x 44H x 28D (3.58 x 1.73 x 1.73) (3.58 x 1.73 x 1.73) (3.58 x 1.73 x 1.10) Panel cutout mm (inch) Recommended panel cutout dimensions: 1/8 DIN 92W x 45H (3.62 x 1.77) 92W x 45H (3.62 x 1.77) 92W x 45H (3.62 x 1.77) ■ DISPLAY 2 Features Description NT2S-SF121B-E NT2S-SF122B-E NT2S-SF123B-E Display Lines * characters 2 * 16 2 * 16 2 * 16 Character height mm (inch) 4.35 (0.17) 4.35 (0.17) 4.35 (0.17) Backlit LED backlight Yes Yes Yes Effective display area mm (inch) 60 x 13 (2.36 x 0.51) 60 x 13 (2.36 x 0.51) 60 x 13 (2.36 x 0.51) Indicators Red and green LED indicators Yes Yes Yes Number of screens Max. number of screens if only text messages are used. Adding function keys, scrolling messages, etc. decreases the maximum number of screens. 250 250 NA Data format HEX, BCD, OCT, BIN, signed, unsigned Yes Yes Controlled by PLC NT2S NT2S ■ FUNCTION KEYS Features Description NT2S-SF121B-E NT2S-SF122B-E NT2S-SF123B-E Available function keys Number of user programmable function keys 6 6 6 fixed function Global function key program Function key can be programmed for global functions. Key program is effective throughout the NT2S program. Yes Yes NA Local function key program Function key can be programmed uniquely for each screen. Yes Yes NA Function key binary action Momentary, toggle on, toggle off, set on, set off Yes Yes NA Function key numeric action Set constant value, increment, or decrement by a constant value to PLC register. Yes Yes NA Numeric entry Special screen uses arrow, clear, and enter keys Yes to input numeric values to PLC register. Yes Yes Function key screen Global function key actions can be linked to a function key screen that displays upon activation of that function key. This can be used to confirm function key. Yes Yes NA Password protect any key Password can be activated for any function key. Yes Yes NA ■ COMMUNICATIONS Features Description NT2S-SF121B-E NT2S-SF122B-E NT2S-SF123B-E COM port 1 Programming & Printing port DB9 connector RS-232 Port DB9 connector RS-232 Port NA COM port 2 Host PLC communications DB9 connector CMOS/ RS-232 port DB9 connector CMOS port DB9 connector CMOS port NT2S-SF122B-E NT2S-SF123B-E ■ SPECIAL FUNCTIONS Features Description NT2S-SF121B-E Real time clock 2-digit year, month, date, hour, minute, second Yes NA NA 2 user definable LEDs Red and green LED can be controlled from PLC Yes Yes Yes Scrolling messages Scroll messages up to 256 characters Yes Yes NA Flashing display Specify for backlight to flash Yes Yes NA Minimum display time Define minimum display time for a screen Yes Yes NA Screen chaining Chained screens will display in sequential fashion, each displaying for the set minimum display time. Yes Yes NA Link screen Create a list of screens that can be navigated using the NEXT (F1) and PREVIOUS (F2) keys. Yes Yes NA Bar graph display Display numeric values as a bar graph Yes Yes Yes ■ PRINT FUNCTIONS Features Description NT2S-SF121B-E NT2S-SF122B-E NT2S-SF123B-E Print screen Configure serial communications port to communicate with a printer. Print screen text and displayed PLC data values can be printed. Yes Yes No 3 NT2S NT2S Operations ■ NT2S-SF121B-E ■ NT2S-SF123B-E Key Features Key Features • Unit programmed with Windows-based software included with each unit at no charge This is not a typical message display. The NT2S-SF123B-E is a message display with function keys that provide data entry and screen changing capability. The unit displays ASCII characters that are stored in PLC registers. The displayed data register is controlled by a command register which specifies the register number to be viewed. PLC registers can be programmed to display text or numeric values from other PLC memory locations using pointers. Numeric values displayed on screen can be modified by entering the DATA mode and using the up and down arrow function keys. • 24 VDC from external power supply • Real time clock — year, month, date, hour, minute and second sent to specified PLC registers • Supports Omron PLCs • Supported multi-vendor PLCs - Omron Host Link - Allen-Bradley Micrologix and SLC 5/0X (DF1) - GE Micro - Modicon (Modbus Master) - Keyence KV Series - Toshiba T Series - Koyo 305, 405 and DL205 Series • 5 VDC power supplied by PLC peripheral port • Supports all Omron PLCs • Preset function keys allow navigation through PLC registers, selection of data for modifications and entry of new values ■ NT2S-SF122B-E Key Features • Unit programmed with Windows-based software included with each unit at no charge • 5 VDC power supplied by PLC peripheral port • For use with Omron PLCs Dimensions Unit: mm (inch) ■ OPERATOR INTERFACES NT2S-SF121B-E NT2S-SF122B-E 44 (1.73) 91 (3.58) 60 (2.36) Panel cutout 1/8 DIN 92 (3.62) 109 (4.29) 44 (1.73) NT2S-SF123B-E 45 (1.77) 44 (1.73) 91 (3.58) 60 (2.36) 109 (4.29) 28 (1.10) 4 OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465 Cat. No. P09FAD1 11/99 Specifications subject to change without notice. Printed in the U.S.A.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project