SM6-M2 Audio Surveillance Kit Description

SM6-M2 Audio Surveillance Kit Description
Sound Surveillance tm
SM6-M2
Audio Surveillance
Kit
Electronic Technical Services Inc.
211 Conchas SE
Albuquerque, NM 87123
PH 505-888-3923 FAX 505-888-3926
Website: www.etsnm.com
Description
Complete single zone, 2 microphone,
audio surveillance system with built
in speaker and headphone jack.
Expands pickup coverage to 50 feet
in all directions using 2 SM1
microphone signals mixed together.
SMM2 mixer has volume controls for
each microphone. The SM6-M2 can
be used independently for monitoring
live audio or with tape recorders and
DVRs for recording and playback.
Kit Includes
SM1 Microphone Specifications
•
•
•
•
•
•
•
•
2ea SM1 Pre-amplified microphone.
SM3 Amplifier.
SMM2 active microphone mixer.
12 VDC AC adapter.
SM1 Mounting screws
3’ Dual RCA Patch cable.
2ea. Warning label.
Options
•
RM1, RM2, RM3 18” Rack mounts.
•
•
•
•
•
Wiring Requirements
•
•
•
•
•
Stranded 22-gauge, 2-conductor
shielded cable with drain wire.
Max. cable length: 1500’
SM3 Amplifier Specifications
•
SMM2 Mixer Specifications
•
•
•
•
•
Powered by SM3 base station.
Level controls for each microphone.
3 position Euro-style connectors make
cable terminations fast and clean.
Power consumption 20ma@12Vdc.
See SMM2 data sheet for more
information.
1 year parts and labor.
Made in U.S.A.
Omni-directional Electret element.
25’ range in all directions.
Low noise MOSFET pre-amplifier.
Line level, unbalanced output.
Adjustable gain.
Treble boost circuit. Selectable on/off.
Enhances clarity of time lapse recordings.
Limiter circuit. Selectable on/off.
3 position Euro-style connector makes
cable termination fast and clean.
Flush mountable. Can be mounted on a single
gang electrical box.
Power: 12 VDC @ 10mA.
See SM1 data sheet for more information.
•
•
•
•
•
•
•
•
•
Standard RCA jacks for connection to tape
recorders, DVRs, etc.
3 position Euro-style connector makes
cable termination fast and clean.
1 Watt Power amplifier.
3” full range speaker.
Tape monitor switch.
3.5mm Headphone jack.
Power: 12 VDC @ 250mA.
Reverse polarity protected and fused.
Dimensions L 5.4 x W 4.1 x H 1.5
See SM3 data sheet for more information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising