Catalogue Sheet: RAE Series

Catalogue Sheet: RAE Series
Type:
new product
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
RAE SERIES
Aluminum Slim Edge-Lit
Pictogram Exit Sign
Supply and install the Ready-Lite® RAE Series slim-profile pictogram Edge-Lit Exit Sign. The unit shall
operate with universal 2-wire AC input voltage of 120 to 347VAC at less than 3W and universal 2-wire
DC input voltage from 6 to 24VDC at less than 2.5W. The housing assembly shall be constructed of
extruded aluminum with textured finish and
colour. The canopy shall be of Die-Cast aluminum
and allow for wall, end, or ceiling mount. The legend shall be printed on a pure-acrylic panel. The light
source shall be long-life white light-emitting diodes (LED) and shall provide even illumination in normal and
emergency operation. The pictogram Edge-Lit Exit Sign in a Self-powered configuration shall use a sealed
Nickel-Cadmium battery of 2.4V nominal voltage and shall stay illuminated during emergency operation for
at least two hours upon AC failure.
The pictogram Edge-Lit Exit Sign shall be listed CSA 22.2 No.141-10.
The equipment shall be Ready-Lite® Model:
DIMENSIONS
Dimensions are approximate and subject to change.
12-1/2” [31.9 cm]
9-5/8” [24.4 cm]
10-3/4” [27.3 cm]
10-5/8” [27.0 cm]
< PICTOGRAM
LEFT FROM HERE
PICTOGRAM >
RIGHT FROM HERE
4-1/4” [10.7 cm]
12” [30.5 cm]
1-5/8” [4.2 cm]
10-1/8” [25.7 cm]
• Slim-profile extruded aluminum
housing
• Universal surface mounting – wall,
ceiling or end mount
• Click-to-open housing door allows
easy access to the panel and electrical
wiring
• Acrylic panel with pictogram legend
• Long-life white LED light source
• Meets or exceeds CSA.222 No.141-10
• Universal AC input: two-wire 120 to
347VAC; standard DC input: two-wire
6 to 24VDC
• Energy efficient – consumes less than
3W in AC or DC-remote mode
• Self-powered models provide minimum
two hours of emergency lighting
10-5/8” [27.0 cm]
FEATURES
.
PICTOGRAM
STRAIGHT FROM
HERE
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC-only
120 to 347VAC
less than 3W
-
-
AC/DC standard
120 to 347VAC
less than 3W
6 to 24VDC
less than 2.5W
AC/48VDC
120 to 347VAC
less than 3W
48VDC
2W
AC/120VDC
120 to 347VAC
less than 3W
120VDC
4.7W
two-wire 120V AC/DC
120VAC
less than 3.5W
120VDC
less than 3.5W
self-powered
120 to 347VAC
less than 4W
nickel-cadmium battery
minimum 2 hours
ORDERING INFORMATION
SERIES
RAE= extruded aluminum edge-lit pictogram exit sign
FACES / ARROW
1= single face, no arrow
L= s ingle face, left arrow
R= single face, right arrow
A= double faces, arrow left or right
HOUSING COLOUR
OW= off-white
TA= textured aluminum
VOLTAGE
AC= 120 to 347VAC only
DC= 120 to 347VAC; 6 to 24VDC
SP= s elf-powered, 120 to 347VAC*
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2 wires 120VAC/VDC
*Self-powered (120 mins. time base)
EXAMPLE: RAE1OWDC
18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement