DM-TX-200-2G - bei vip systemtechnik

DM-TX-200-2G - bei vip systemtechnik
DM-TX-200-2G
Wall Plate DigitalMedia™ CAT Transmitter 200
The DM-TX-200-2G is a DM CAT transmitter and switcher that installs in
a double-gang wall box to provide a convenient interface for
computers and high-definition AV sources as part of a complete
DigitalMedia system. With both HDMI® and RGB inputs, the DM-TX-200-2G
is ideal for wall, lectern, and floor box applications in a boardroom,
classroom, or residence to provide an input for a laptop computer or
similar source. It connects to any DM-MD series DigitalMedia switcher
or DM-RMC-100 Room Controller via a single DM cable.
DigitalMedia™
As the leader in HDMI and control system technologies, Crestron® has
developed DigitalMedia, the first complete HD AV distribution system
that takes HDMI to a higher level, and allows virtually any mix of AV
sources to be distributed throughout the home, office, school, or
virtually any other facility.
DigitalMedia distributes uncompressed digital video and audio signals
up to 450 feet (137 m) using DM cable[1]. DigitalMedia thoughtfully
manages all of the different signals and devices, matching each
source's output to the capabilities of the selected display(s) without
using scaling or compression. Every signal is preserved in its native
video resolution and audio format, ensuring a pure, lossless signal
path throughout.
Multimedia Computer/AV Interface
The DM-TX-200-2G provides simple switching between two inputs. Its
HDMI input supports HDCP and handles WUXGA computer resolutions and
1080p60 HDTV with multi-channel lossless audio. The HDMI input can
also handle DVI and DisplayPort Multimode signals using an appropriate
adapter or dongle[2]. The RGB input handles all analog RGB signals
up to WUXGA 1920x1200 pixels, as well as component video up to
1080p60[3]. A mini-TRS stereo audio input is also provided to accept
analog audio signals from an unbalanced line-level or headphone
output.
Used with a single DM-RMC-100 Room Controller and optional Crestron
Control System, the DM-TX-200-2G affords a very simple solution for
extending a multimedia computer or AV signal to a single display up to
450 feet (137 m) away[1]. As part of a larger system using a DM-MD
series switcher, multiple DM-TX-200-2Gs may be installed to enable the
distribution of several sources at different locations to feed
multiple displays throughout any room or larger facility.
Keyboard/Mouse Extender
Also, when connected to a DM-MD series switcher, the DM-TX-200-2G
functions as a keyboard/mouse extender, allowing a USB HID-compliant
keyboard and/or mouse at the podium or conference table to control a
computer or other host device located at the central equipment rack.
EDID Format Management
The DM-TX-200-2G allows for management of the EDID (Extended Display
Identification Data) information that passes between the display
devices and input sources in the system. Using Crestron Toolbox™
software, the format and resolution capabilities of each device can be
assessed and managed through the DM-TX-200-2G, ensuring reliable
operation by instructing sources to output only the resolutions and
formats that can be handled by the displays and system wiring.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. DigitalMedia
www.crestron.com
800.237.2041
provides an alternative to conventional IR and RS-232 device control
by harnessing the CEC (Consumer Electronics Control) signal embedded
in HDMI. Through its connection to the control system, the
DM-TX-200-2G provides a gateway for controlling the connected source
device right through the HDMI connection, potentially eliminating the
need for any dedicated control wires or IR probes. Through proper CEC
signal management, DigitalMedia allows you to take control of each
device in the system as you like.
Simple Wall Mount Design
The DM-TX-200-2G is designed to be wall mounted using a standard
electrical box or plaster ring. The DM cable is terminated to the rear
of the transmitter using screw terminals. An array of indicators on
the front of the DM-TX-200-2G provides for easy setup and
troubleshooting, verifying the status of connections and signal
activity at a glance. Advanced configuration is enabled through
Crestron Toolbox™ software.
A Digital Upgrade for Legacy Systems
The DM-TX-200-2G also affords a perfect signal converter for
integrating DigitalMedia with analog-based systems like Crestron MPS,
QuickMedia®, and the CEN-RGBHV Series. A simple HD15 VGA cable
connected between the output of an MPS system and the input of the
DM-TX-200-2G allows every RGB, component, S-Video, and composite video
input on the MPS to be converted to DigitalMedia[3]. Analog audio
is converted similarly through a simple unbalanced stereo audio cable.
The DM-TX-200-2G's HDMI input may also be used to expand the input
capabilities of the MPS system to handle digital AV sources.
Please refer to the DigitalMedia Design Guide, Doc. #4789 for
additional information.
> DigitalMedia™ transmitter and computer interface
> Built-in 2x1 AV switcher
> DM CAT output supports up to 450 ft cable length[1]
> 2-gang wall mount design
DM-TX-200-2G
> Available colors include black or white
Communications
> Fits in a FSR FL-500P-6 Floor Box[4]
DigitalMedia: DM CAT, DMNet, HDCP management, EDID format
management, CEC
USB: Supports USB HID class devices
> Provides HDMI® and RGB/component video inputs
> Also supports DVI and DisplayPort Multimode sources[2]
Connectors - Front
> Easy setup and diagnostics tools via software
AUDIO IN: (1) 3.5mm TRS mini phone jack;
Unbalanced stereo line-level audio input;
Input Impedance: 10k Ohms;
Input Level: 2 Vrms maximum
USB HID: (1) USB Type A female;
USB 1.1 host port for connection of a mouse/keyboard or other USB HIDcompliant device
HDMI IN: (1) 19-pin Type A HDMI female;
HDMI digital video/audio input;
Also supports DVI and DisplayPort Multimode[2]
PC IN: (1) DB15HD female, RGB (VGA) or component (YPbPr) video input[3];
Formats: RGBHV, RGBS, RGsB, YPbPr;
Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration;
Input Impedance: 75 Ohms;
Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr;
Sync Input Level: 3 to 5 Vp-p;
Sync Input Impedance: 1k Ohms
> Extends the life of analog-based AV systems
Connectors - Rear
> Includes mini-TRS stereo audio input
> Provides onboard auto-switching capability
> Includes USB HID keyboard/mouse port
> Affords single-wire connection to a DM-RMC-100 or DMMD
switcher
> Detects and reports detailed video and audio input
information
> Performs automatic AV signal format management via EDID
> Enables device control via CEC
SPECIFICATIONS
Video
Switcher: 2x1 combination digital/analog switch, Crestron QuickSwitch HD®
Input Signal Type: HDMI®, DVI[2], DisplayPort Multimode[2], RGB, component
(YPbPr)[3], S-Video (Y/C)[3], composite[3]
Output Signal Type: DM CAT (DigitalMedia over twisted-pair copper wire)
Formats: HDMI, DVI, HDCP content protection support, RGBHV up to UXGA/
WUXGA, HDTV up to 1080p60, NTSC or PAL
Input Resolutions, HDMI & DVI, Progressive: [email protected],
[email protected] (480p), [email protected] (576p), [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected] (720p50),
[email protected] (720p60), [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected] (1080p24),
[email protected] (1080p25), [email protected] (1080p50),
[email protected] (1080p60), [email protected], [email protected],
[email protected], plus any other resolution allowed by HDMI up to 165MHz
pixel clock
Input Resolutions, HDMI & DVI, Interlaced: [email protected] (480i),
[email protected] (576i), [email protected] (1080i25), [email protected]
(1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel
clock
Input Resolutions, RGB: [email protected], [email protected] (480p),
[email protected] (576p), [email protected], [email protected], [email protected],
[email protected] (720p50), [email protected] (720p60), [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected] (1080p24), [email protected]
(1080p50), [email protected] (1080p60), [email protected],
[email protected], [email protected]
Input Resolutions, Component[3]: 480i, 576i, 480p, 576p, 720p50, 720p60,
1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60
Input Resolutions, Composite and S-Video[3]: 480i, 576i
Output Resolutions: Matched to inputs
Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels
Audio
Switcher: 2x1 combination digital/analog switch
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
D, M: (1) DM CAT output composed of (16) captive screw terminals with (2)
grounded strain reliefs;
Connects to DM CAT input of a DM switcher, receiver/room controller, or
other DM device via DM-CBL cable[1]
G B A 24: (1) DMNet port composed of (4) captive screw terminals;
Connects to DMNet port of a DM switcher, receiver/room controller, or other
DM device via DM-CBL cable[1]
G: (1) Flying lead, chassis ground connection
DM Cable Length
Cable Type:
DM-CBL DigitalMedia CableMaximum length without, between, before, or
after repeaters:
• 200 ft (60 m) for 720p, 1080i, 1080p24
• 200 ft (60 m) for 1024x768 @75Hz
• 150 ft (45 m) for 1080p60
• 150 ft (45 m) for 1280x1024 @75Hz
• 150 ft (45 m) for 1920x1200 @60Hz
• 125 ft (38 m) for 1600x1200 @60Hz
Maximum total length using up to 2 repeaters:
•
•
•
•
•
•
450 ft (137 m) for 720p, 1080i, 1080p24
450 ft (137 m) for 1024x768 @75Hz
450 ft (137 m) for 1080p60
450 ft (137 m) for 1280x1024 @75Hz
450 ft (137 m) for 1920x1200 @60Hz
375 ft (114 m) for 1600x1200 @60Hz
Controls & Indicators
PWR: (1) green LED, indicates operating power supplied via DMNet
RESET: (1) miniature recessed pushbutton for hardware reset
SETUP: (1) red LED and (1) miniature recessed pushbutton for Ethernet autodiscovery
DM LINK: (1) green LED, indicates connection to a downstream DM device
HDMI: (1) green LED, indicates HDMI input is selected
PC: (1) green LED, indicates PC input is selected
DM-TX-200-2G
Power Requirements
DMNet Power Usage: 10 Watts (0.42 Amps @ 24 Volts DC)
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 35 BTU/Hr
Enclosure
Construction: Metal with black or white finish
Flush Wall Mount: 2-gang mountable in a standard electrical box (2-1/2 inch
deep minimum); requires decorator style faceplate (not included)
Dimensions
Height: 4.12 in (105 mm)
Width: 3.50 in (89 mm)
Depth: 2.53 in (64 mm)
Weight
10.1 oz (285 g)
Available Models
DM-TX-200-2G: Wall Plate DigitalMedia™ CAT Transmitter 200, Matte Black
DM-TX-200-2G-W-T: Wall Plate DigitalMedia™ CAT Transmitter 200, Matte
White [Just Released]
Available Accessories
DM-CBL-NP-SP500: DigitalMedia™ Cable, non-plenum, 500 ft spool
DM-CBL-P-SP500: DigitalMedia™ Cable, plenum-rated, 500 ft spool
DM-DR: DigitalMedia™ Repeater
CBL-HD-1.5: Crestron® Certified HDMI™ Interface Cable, 1.5 ft
CBL-HD-3: Crestron® Certified HDMI™ Interface Cable, 3 ft
CBL-HD-6: Crestron® Certified HDMI™ Interface Cable, 6 ft
CBL-HD-12: Crestron® Certified HDMI™ Interface Cable, 12 ft
CBL-HD-20: Crestron® Certified HDMI™ Interface Cable, 20 ft
CBL-HD-30: Crestron® Certified HDMI™ Interface Cable, 30 ft
CBL-HD-DVI-1.5: Crestron® Certified HDMI™ to DVI Interface Cable, 1.5 ft
CBL-HD-DVI-3: Crestron® Certified HDMI™ to DVI Interface Cable, 3 ft
CBL-HD-DVI-6: Crestron® Certified HDMI™ to DVI Interface Cable, 6 ft
CBL-HD-DVI-12: Crestron® Certified HDMI™ to DVI Interface Cable, 12 ft
CBL-HD-DVI-20: Crestron® Certified HDMI™ to DVI Interface Cable, 20 ft
CBL-HD-DVI-30: Crestron® Certified HDMI™ to DVI Interface Cable, 30 ft
CBL-DP-HD-1.5: Crestron® Certified DisplayPort to HDMI™ Interface Cable,
1.5 ft
CBL-DP-HD-3: Crestron® Certified DisplayPort to HDMI™ Interface Cable, 3
ft
CBL-DP-HD-6: Crestron® Certified DisplayPort to HDMI™ Interface Cable, 6
ft
CBL-DP-HD-12: Crestron® Certified DisplayPort to HDMI™ Interface Cable,
12 ft
CBL-DP-HD-20: Crestron® Certified DisplayPort to HDMI™ Interface Cable,
20 ft
CBL-DP-HD-30: Crestron® Certified DisplayPort to HDMI™ Interface Cable,
30 ft
CBL-VGA-1.5: Crestron® Certified Computer VGA Interface Cable, 1.5 ft
CBL-VGA-3: Crestron® Certified Computer VGA Interface Cable, 3 ft
CBL-VGA-6: Crestron® Certified Computer VGA Interface Cable, 6 ft
CBL-VGA-12: Crestron® Certified Computer VGA Interface Cable, 12 ft
CBL-VGA-25: Crestron® Certified Computer VGA Interface Cable, 25 ft
CBL-VGA-AUD-3: Crestron® Certified Computer VGA Interface Cable w/
Audio, 3 ft [Release Date: TBA]
CBL-VGA-AUD-6: Crestron® Certified Computer VGA Interface Cable w/
Audio, 6 ft [Release Date: TBA]
CBL-VGA-AUD-12: Crestron® Certified Computer VGA Interface Cable w/
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
CBL-VGA-AUD-25: Crestron® Certified Computer VGA Interface Cable w/
Audio, 25 ft [Release Date: TBA]
CBL-VGA-AUD-50: Crestron® Certified Computer VGA Interface Cable w/
Audio, 50 ft [Release Date: TBA]
CBL-VGA-AUD-75: Crestron® Certified Computer VGA Interface Cable w/
Audio, 75 ft [Release Date: TBA]
CBL-AUDIO-1.5: Crestron® Certified Mini-TRS Stereo Audio Interface Cable,
1.5 ft
CBL-AUDIO-3: Crestron® Certified Mini-TRS Stereo Audio Interface Cable, 3
ft
CBL-AUDIO-6: Crestron® Certified Mini-TRS Stereo Audio Interface Cable, 6
ft
CBL-AUDIO-12: Crestron® Certified Mini-TRS Stereo Audio Interface Cable,
12 ft
Notes:
1. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two
DM Repeaters (Model DM-DR) may be required. Refer to the Crestron
DigitalMedia Design Guide, Doc. #4789 for complete wiring guidelines.
2. HDMI requires an appropriate adapter or interface cable to accommodate
a DVI or DisplayPort Multimode signal. CBL-HD-DVI and CBL-DP-HD interface
cables available separately.
3. The RGB input can accept component, composite, and S-Video signals via
direct interface to Crestron MPS Series products, or through an appropriate
adapter (not included). Input sync detection is not provided for composite
or S-Video signal types through the RGB connection.
4. FSR FL-500P-6 Floor Box available to authorized FSR dealers from FSR
Inc., 244 Bergen Boulevard, Woodland Park, NJ 07424; Tel: 973-785-4347;
Web: http://www.fsrinc.com/.
This product may be purchased from an authorized Crestron dealer. To find a
dealer, please contact the Crestron sales representative for your area. A
list of sales representatives is available online at www.crestron.
com/salesreps or by calling 800-237-2041.
Crestron, Crestron Toolbox, DigitalMedia, DM, QuickMedia, and QuickSwitch
HD are trademarks or registered trademarks of Crestron Electronics, Inc.
Dolby, Dolby Digital, and the double-D symbol are trademarks or registered
trademarks of Dolby Laboratories. DTS is a registered trademark & the DTS
logos and Symbol are trademarks of DTS, Inc. HDMI, the HDMI Logo, and
High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
DM-TX-200-2G
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement