USB Autolaunch Software Extension ....................................................................................................... Quick Start Guide USB Autolaunch Software Extension Quick Start This document describes how to install and use the USB Autolaunch software. When programming with FLIP, this application automatically executes a command file when a USB device (AT89C5122D, AT89C5130A or AT89C5131A) is connected and/or detected on a PCs USB port. This software can also be used for an easy Plug & Play firmware upgrade for USB applications. 1.1 Abbreviations USB: Universal Serial Bus FLIP: FLexible In system Programmer BatchISP : Dos executable In system Programmer VID: Vendor IDentification PID: Product IDentification 1.2 System Requirements PC running Windows® 2000/ME/98/XP Available USB ports FLIP Package software installed 1.3 Features 1.4 Installation – Easy Plug & Play Upgrade for USB Flash products: AT89C5122D, AT89C5130A, AT89C5131A – Based on Jungo driver 1. Unzip UsbAutoLaunch.zip. 2. Install Autolaunch Software - Launch setup.exe 3. Complete Serial Number (VIP/PID) - User Name and Company Name fields are not used (see Figure 1-1.) – For AT89C5130A/31A VID=03EB PID=2FFD (Default) – For AT89C5122D VID=03EB PID=2FFE USB Autolaunch Quick Start Guide -3 7529A–USB–09/05 Figure 1-1. VID / PID 1. Reboot your PC 2. Check Autolaunch installation with Atmel icon The installation example is based on AT89C5131A USB product. Step 3 has to be adapted for AT89C5122D. 3. Move C:\Program Files\ATMEL\UsbAutoLaunch\batchisp_usb.txt to C:\temp\directory. The directory can be changed as needed however batchISP command line of usb_auto_launch.bat file has to be modified. 4. Connect AT89STK05 board with in chip AT89C5130A or C5131A ISP mode set up. 1.5 USB Autolaunch USB Autolauch software requires one system file: usb_auto_launch.bat: This file is executed by USB Autolaunch when VIP/PID on USB device is detected. The file usb_auto_launch.bat contains the path and command line for batchisp software : "C:\Program Files\ATMEL\FLIP "C:\temp\batchisp_usb.txt" x.x.x\bin\batchisp.exe" -cmdfile batchisp_usb.txt: This file contains commands for BatchISP software. USB Autolaunch Quick Start Guide -4 7529A–USB–09/05 Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Atmel Operations Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel: (49) 71-31-67-0 Fax: (49) 71-31-67-2340 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel: (33) 2-40-18-18-18 Fax: (33) 2-40-18-19-60 ASIC/ASSP/Smart Cards 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel: (33) 4-76-58-30-00 Fax: (33) 4-76-58-34-80 Zone Industrielle 13106 Rousset Cedex, France Tel: (33) 4-42-53-60-00 Fax: (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743 Literature Requests www.atmel.com/literature Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise,to anyintellectualproperty right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORYWARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULARPURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUTOF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes norepresentationsor warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specificationsand product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically providedotherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for useas components in applications intended to support or sustainlife. © Atmel Corporation 2005. All rights reserved. Atmel ®, logo and combinations thereof, are registered trademarks, and Everywhere You Are SM are the trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. Printed on recycled paper. /xM 7529A–USB–09/05
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021