EDNord PagePro 1300W User`s guide

EDNord PagePro 1300W User`s guide
pagepro 4650EN/5650EN
User’s Guide
A0DX-9561-01A
1800850-001B
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Thank You
Thank you for purchasing a pagepro 4650EN/5650EN. You have made an excellent
choice.
Your pagepro 4650EN/5650EN is specially designed for optimal performance in Windows, Macintosh and Linux environments.
Trademarks
KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered
trademarks of KONICA MINOLTA HOLDINGS, INC.
pagepro and PageScope are trademarks or registered trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
All other trademarks and registered trademarks are the property of their respective
owners.
Copyright Notice
Copyright © 2007 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.,
Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005,
Japan. All Rights Reserved. This document may not be copied, in whole or part, nor
transferred to any other media or language, without written permission of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Notice
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. reserves the right to make
changes to this guide and to the equipment described herein without notice. Considerable effort has been made to ensure that this guide is free of inaccuracies and
omissions. However, KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. makes
no warranty of any kind including, but not limited to, any implied warranties of merchantability and fitness for a particular purpose with regard to this guide. KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC. assumes no responsibility for, or liability for, errors contained in this guide or for incidental, special, or consequential
damages arising out of the furnishing of this guide, or the use of this guide in operating the equipment, or in connection with the performance of the equipment when so
operated.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
SOFTWARE LICENSE AGREEMENT
This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded
machine-readable outline data encoded in the special format and in the encrypted form (“Font
Programs”), other software which runs on a computer system for use in conjunction with the
Printing Software (“Host Software”), and related explanatory written materials (“Documentation”). The term “Software” shall be used to describe Printing Software, Font Programs and/or
Host Software and also include any upgrades, modified versions, additions, and copies of the
Software.
The Software is being licensed to you under the terms of this Agreement.
KMBT grants to you a non-exclusive sublicense to use the Software and Documentation, provided that you agree to the following:
1. You may use the Printing Software and accompanying Font Programs for imaging to the
licensed output device(s), solely for your own internal business purposes.
2. In addition to the license for Font Programs set forth in Section 1 (“Printing Software”)
above, you may use Roman Font Programs to reproduce weights, styles, and versions of
letters, numerals, characters and symbols (“Typefaces”) on the display or monitor for your
own internal business purposes.
3. You may make one backup copy of the Host Software, provided your backup copy is not
installed or used on any computer. Notwithstanding the above restrictions, you may install
the Host Software on any number of computers solely for use with one or more printing
systems running the Printing Software.
4. You may assign its rights under this Agreement to an assignee of all of Licensee’s right and
interest to such Software and Documentation (“Assignee”) provided you transfer to
Assignee all copies of such Software and Documentation Assignee agrees to be bound by
all of the terms and conditions of this Agreement.
5. You agree not to modify, adapt or translate the Software and Documentation.
6. You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer or
decompile the Software.
7. Title to and ownership of the Software and Documentation and any reproductions thereof
shall remain with KMBT and its Licensor.
8. Trademarks shall be used in accordance with accepted trademark practice, including identification of the trademark owner’s name. Trademarks can only be used to identify printed
output produced by the Software. Such use of any trademark does not give you any rights
of ownership in that trademark.
9. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software that
the Licensee does not use, or Software contained on any unused media, except as part of
the permanent transfer of all Software and Documentation as described above.
10. In no event will KMBT or its licensor be liable to you for any consequential, incidental INDIRECT, PUNITIVE or special damages, including any lost profits or lost saving, even if
KMBT has been advised of the possibility of such damages, or for any claim by any third
party. KMBT or its licensor disclaims all warranties with regard to the software, express or
implied, including, without limitation implied warranties of merchantability, fitness for a particular purpose, title and non-infringement of third party rights. Some states or jurisdictions
do not allow the exclusion or limitation of incidental, consequential or special damages, so
the above limitations may not apply to you.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
11. Notice to Government End Users: The Software is a “commercial item,” as that term is
defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial
computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Government End Users acquire the Software with only those rights set forth herein.
12. You agree that you will not export the Software in any form in violation of any applicable
laws and regulations regarding export control of any countries.
For EU member states only
This symbol means: Do not dispose of this product
together with your household waste!
Please contact the Local Authority for appropriate disposal instructions. In the case of a new device being
purchased, the used one can also be given to our dealer
for appropriate disposal. Recycling of this product will
help to conserve natural resources and prevent potential
negative consequences for the environment and human
health caused by inappropriate waste handling.
This product complies with RoHS (2002/95/EC) directive.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Contents
1
Introduction ....................................................................................................... 1
Getting Acquainted with Your Printer 2
Space Requirements 2
Printer Parts 4
Front View 4
Rear View 4
Internal View 5
Front View with Options 6
2
About the Software ........................................................................................... 7
Printer Driver CD-ROM 8
PostScript Drivers 8
PCL Drivers 8
XPS Drivers 8
PPD Files 9
Utilities and Documentation CD-ROM 9
Utilities 9
System Requirements 11
Selecting Driver Options/Defaults
(for Windows) 12
Contents
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
i
Windows Vista/XP/Server 2003/2000
(KONICA MINOLTA pagepro 4650(5650) PCL, KONICA MINOLTA
pagepro 4650(5650) PS) 12
Uninstalling the Printer Driver
(for Windows) 14
Windows Vista/XP/Server 2003/2000
(KONICA MINOLTA pagepro 4650(5650) PCL, KONICA MINOLTA
pagepro 4650(5650) PS) 14
Displaying Printer Driver Settings
(for Windows) 15
Windows Vista 15
Windows XP/Server 2003 15
Windows 2000 15
Using the Postscript and PCL Printer Driver 16
Common Buttons 16
OK 16
Cancel 16
Apply 16
Help 16
Favorite Setting 16
Paper View 17
Printer View 17
Quality View 17
Default 17
Advanced Tab (PostScript Printer Driver Only) 17
Basic Tab 17
Layout Tab 18
Finish tab 18
Cover Page Tab 18
Watermark/Overlay Tab 19
Quality Tab 19
Other Tab 20
Limitations on printer driver functions installed with Point and Print 20
3
Using the Status Monitor (Windows Only) ....................................................21
Working with the Status Monitor 22
Introduction 22
Operating Environment 22
Opening the Status Monitor 22
Using the Status Monitor 22
Recognizing Status Monitor Alerts 23
Recovering from a Status Monitor Alert 23
Closing the Status Monitor 23
4
Printer Control Panel and Configuration Menu ............................................25
About the Control Panel 26
ii
Contents
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Control Panel Keys and Port 26
Message Window 28
Help Screens 29
Configuration Menu Overview 30
Main Menu 30
PROOF/PRINT MENU 31
Printing/Deleting a Stored Job 31
Entering the Password 33
PRINT MENU 34
PAPER MENU 36
QUALITY MENU 49
MEMORY DIRECT 52
INTERFACE MENU 55
SYS DEFAULT MENU 63
MAINTENANCE MENU 74
SERVICE MENU 77
5
Memory Direct ................................................................................................. 79
Memory Direct 80
Printing From a Connected USB Memory Device 80
6
Using Media ..................................................................................................... 83
Media Specifications 84
Media Types 85
Plain Paper (Recycled Paper) 85
Thick Stock 87
Envelopes 87
Labels 88
Postcards 89
Thin Paper 90
Transparencies 91
What Is the Guaranteed Imageable (Printable) Area? 92
Imageable Area—Envelopes 92
Page Margins 92
Loading Media 93
Loading Media (Tray 1/2/3/4) 93
Loading Plain Paper 93
Other Media 95
Loading Envelopes 96
Loading Label sheets/Postcards/Thick Stock/Thin paper/Transparencies
99
Loading the Paper Larger than A4 102
Loading Banner paper in the Tray 1 105
Duplexing 108
Output Tray 109
Finishing 110
Contents
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
iii
Job Separation Printing
Offset Printing 111
Media Storage 112
110
7
Replacing Consumables ...............................................................................113
Replacing Consumables 114
About toner cartridge 114
Replacing a Toner Cartridge 117
Replacing the Fuser Unit 119
Replacing the Transfer Roller 125
Replacing the Feed Roller 127
Replacing the Feed Roller (in the Tray) 128
Replacing the Feed Roller (inside the Printer) 131
Replacing the Backup Battery 133
8
Maintaining the Printer ..................................................................................137
Maintaining the Printer 138
Cleaning the Printer 140
Exterior 140
Cleaning the Feed Roller (inside the Tray) 141
Cleaning the Feed Roller (inside the Printer) 143
Cleaning the Duplex Feed Rollers 145
Cleaning the Offset Tray Feed Rollers 146
Cleaning the Laser Lens 147
9
Troubleshooting ............................................................................................149
Introduction 150
Printing a Configuration Page 150
Preventing Media Misfeeds 151
Understanding the Media Path 152
Clearing Media Misfeeds 153
Media Misfeed Messages and Clearing Procedures 154
Clearing a Media Misfeed at the Paper Tray 155
Clearing a Media Misfeed at the Duplex 158
Clearing a Media Misfeed at the Fuser Unit 160
Clearing a Media Misfeed at the Transfer Roller 163
Clearing a Media Misfeed at the Offset Tray 166
Solving Problems with Media Misfeeds 169
Solving Other Problems 171
Solving Problems with Printing Quality 176
Status, Error, and Service Messages 181
Standard Status Messages 181
Error Messages (Warning:) 182
Error Messages (Operator Call:) 185
Service Messages: 188
iv
Contents
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
10 Installing Accessories .................................................................................. 189
Introduction 190
Antistatic Protection 191
Dual In-Line Memory Module (DIMM) 192
Installing a DIMM 192
Hard Disk Kit 196
Installing the Hard Disk kit 196
CompactFlash 200
Installing the CompactFlash card 200
Duplex 205
Installing the Duplex 205
Lower Feeder Unit 208
Kit Contents 208
Installing the Lower Feeder Unit 209
Offset Tray 214
Installing the Offset Tray 214
Installing the Face Up Tray 217
A Appendix ........................................................................................................ 219
Safety Specifications 220
Technical Specifications 220
Printer 220
Consumable Life Expectancy Chart 225
Our Concern for Environmental Protection 226
What is an ENERGY STAR product? 226
Contents
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
v
vi
Contents
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Introduction
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Getting Acquainted with Your Printer
Space Requirements
To ensure easy operation, consumable replacement and maintenance,
adhere to the recommended space requirements detailed below.
200 mm
(7.9")
921.8 mm (36.3")
300 mm
(11.8")
421.8 mm (16.6")
Front View
200 mm
(7.9")
921.8 mm (36.3")
300 mm
(11.8")
421.8 mm (16.6")
Front View with Options
2
Getting Acquainted with Your Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
200 mm (7.9")
275 mm
(10.8”)
465.4 mm (18.3")
240 mm
(9.4")
921.5 mm (36.3")
721.5 mm (28.4")
150 mm
(5.9")
100 mm
(3.9")
1130.4 mm (44.5")
Side View with Options
"
The option appears shaded in the above illustrations.
Getting Acquainted with Your Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
3
Printer Parts
The following drawings illustrate the parts of your printer referred to throughout this guide, so please take some time to become familiar with them.
Front View
1
8
1—Center output tray
2—Control panel
3—Ventilation grilles
4—Paper meter
2
5—Tray1 (A4/150sheets)
6—Tray2 (A4/550sheets)
7
7—Power switch
8—Paper stopper
6
5
3
4
Rear View
1—Exhaust port
4
2—Duplex connector
5
3—Power connection
4—USB port
6
5—10Base-T/100Base-TX/
1000Base-T Ethernet Interface
port
6—Parallel port
4
1
2
3
Getting Acquainted with Your Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Internal View
3
2
1
1—Paper stopper
2—Toner cartridge
3—Top cover
5
4—Fuser unit
5—Transfer roller
2
4
4
5
For pagepro 5650EN
5
For pagepro 4650EN
Getting Acquainted with Your Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
5
Front View with Options
4
3
1—Duplex
2—Lower feeder units (Tray 3 and
Tray 4)
5
3—Sub tray
4—Offset tray
5—Face up tray (pagepro 5650EN:
Standard, pagepro 4650EN:
Option)
1
1
2
1
For pagepro 5650EN
For pagepro 4650EN
5
4
6
Getting Acquainted with Your Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
About the
Software
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Printer Driver CD-ROM
PostScript Drivers
Operating System
Windows Vista/XP/Server 2003/2000
Windows Vista/XP/Server 2003 for
64bit
"
Use/Benefit
These drivers give you access to all of
the printer features, including finishing and advanced layout. See also
“Displaying Printer Driver Settings (for
Windows)” on page 15.
A specific PPD file has been prepared for applications (such as PageMaker and Corel Draw) that require that a PPD file be specified when
printing.
When specifying a PPD file while printing on Windows Vista, XP,
Server 2003 and 2000, use the specific PPD file provided on the
Printer Driver CD-ROM.
PCL Drivers
Operating System
Windows Vista/XP/Server 2003/2000
Windows Vista/XP/Server 2003 for
64bit
Use/Benefit
These drivers give you access to all of
the printer features, including finishing and advanced layout. See also
“Displaying Printer Driver Settings (for
Windows)” on page 15.
XPS Drivers
Operating System
Windows Vista
Windows Vista for 64bit
"
8
Use/Benefit
These mini drivers for Windows Vista
are based on the Windows core. For
details on the installation method and
functions, refer to the Reference
Guide on the Utilities and Documentation CD-ROM.
The XPS driver cannot be installed by using the auto-play installation
feature of the Printer Driver CD-ROM. For more details, see the Reference Guide on the Utilities and Documentation CD-ROM.
Printer Driver CD-ROM
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
PPD Files
Operating System
Use/Benefit
Windows Vista/XP/Server 2003/2000 These PPD files allow you to install
the printer for a variety of platforms,
drivers, and applications.
Macintosh OS X
Linux
"
These files are required in order to
use the printer driver for each operating system.
For details of the Macintosh and Linux
printer drivers, refer to the Reference
Guide on the Utilities and Documentation CD-ROM.
For details on the installation of the Windows printer drivers, refer to
the Installation Guide on the Utilities and Documentation CD-ROM.
Utilities and Documentation CD-ROM
Utilities
Utility
Use/Benefit
Download Manager
(Windows Vista/XP/Server 2003/
2000, Macintosh OS 10.2.x or later)
This utility, which can be used only if
an optional hard disk kit is installed,
enables fonts and overlay data to be
downloaded to the hard disk.
For details, refer to the Download
Manager online help for all of the functions.
Status Monitor (Windows only)
The current status of the printer in
addition to the status of consumables
and error information can be viewed.
For details, refer to See “Using the
Status Monitor (Windows Only)” on
page 21.
PageScope Net Care
Printer management functions such as
status monitoring and network settings
can be accessed.
For details, refer to the PageScope
Net Care Quick Guide on the Utilities
and Documentation CD-ROM.
Utilities and Documentation CD-ROM
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
9
10
Utility
Use/Benefit
PageScope Web Connection
With a Web browser, the status of
printers can be checked, and the various settings can be changed.
For details, refer to the Reference
Guide on the Utilities and Documentation CD-ROM.
PageScope Network Setup
Using the TCP/IP and IPX protocols,
basic network printer settings can be
specified.
For details, refer to the PageScope
Network Setup User Manual on the
Utilities and Documentation CD-ROM.
PageScope Plug and Print
This utility automatically detects a new
printer connected to the network and
creates a print object on the Windows
print server.
For details, refer to the PageScope
Plug and Print Quick Guide on the
Utilities and Documentation CD-ROM.
PageScope NDPS Gateway
This network utility enables printers
and KONICA MINOLTA multifunctional
products to be used in an NDPS environment.
For details, refer to the PageScope
NDPS Gateway User Manual on the
Utilities and Documentation CD-ROM.
PageScope Direct Print
This application provides functions for
sending PDF and TIFF files directly to
a printer to be printed.
For details, refer to the PageScope
Direct Print User's Guide on the Utilities and Documentation CD-ROM.
Utilities and Documentation CD-ROM
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
System Requirements
„ Personal computer
– Pentium 2: 400 MHz (Pentium 3: 500 MHz or higher is recommended)
– Power Mac G3 or later (G4 or later is recommended)
– Macintosh equipped with an Intel processor
„ Operating System
– Microsoft Windows Vista Home Basic/Home Premium/Ultimate/Business/Enterprise, Windows Vista Home Basic/Home Premium/Ultimate
/Business/Enterprise x64 Edition, Microsoft Windows XP Home Edition/Professional (Service Pack 2 or later is recommended),
Windows XP Professional x64 Edition, Windows Server 2003,
Windows Server 2003 x64 Edition, Windows 2000 (Service Pack 4 or
later)
– Mac OS X (10.2 or later; We recommend installing the newest patch),
Mac OS X Server (10.2 or later)
– Red Hat Linux 9.0, SuSE Linux 8.2
„ Free hard disk space
– Approximately 20 MB of free hard disk space for printer driver and
Status Monitor
– Approximately 128 MB of free hard disk space for image processing
„ RAM
128 MB or more
„ CD/DVD-ROM drive
„ I/O interface
– 10Base-T/100Base-TX/1000Base-T Ethernet interface port
– USB Revision 2.0 compliant port
– Parallel (IEEE 1284) port
"
For details of the XPS, Macintosh and Linux printer drivers, refer to the
Reference Guide on the Utilities and Documentation CD-ROM.
System Requirements
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
11
Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows Vista/XP/Server 2003/2000
(KONICA MINOLTA pagepro 4650(5650) PCL, KONICA
MINOLTA pagepro 4650(5650) PS)
1
Choose the driver’s properties as follows:
– (Windows Vista)
From the Start menu, click Control Panel, then Hardware and
Sound, and then click Printers to open the Printers directory.
Right-click the KONICA MINOLTA pagepro 4650(5650) PCL or
KONICA MINOLTA pagepro 4650(5650) PS printer icon, and then
click Properties.
– (Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
pagepro 4650(5650) PCL or KONICA MINOLTA pagepro 4650(5650)
PS printer icon and choose Properties.
– (Windows 2000)
2
3
4
5
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA pagepro
4650(5650) PCL or KONICA MINOLTA pagepro 4650(5650) PS
printer icon and choose Properties.
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
Select the Configure tab.
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
Click the Refresh to automatically configure installed options.
"
6
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
"
12
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
If Printer Memory is selected, select 128 MB, 256 MB or 384 MB,
according to the installed memory. The factory default setting is
128 MB.
Selecting Driver Options/Defaults (for Windows)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"
7
Click Apply.
"
8
9
10
11
12
13
If Memory Card is selected, select Disable, Enable (1 GB
Under), or Enable (1 GB Over), according to the installed CompactFlash card.
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
Select the General tab.
Click Printing Preferences.
Printing Preference dialog box appears.
Select the default settings for your printer, such as the default media format you use, in the appropriate tabs.
Click Apply.
Click OK to exit from the Print preference dialog box.
Click OK to exit from the Properties dialog box.
Selecting Driver Options/Defaults (for Windows)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
13
Uninstalling the Printer Driver
(for Windows)
This section describes how to uninstall the KONICA MINOLTA pagepro 4650
printer driver or the KONICA MINOLTA pagepro 5650 printer driver if necessary.
Windows Vista/XP/Server 2003/2000
(KONICA MINOLTA pagepro 4650(5650) PCL, KONICA
MINOLTA pagepro 4650(5650) PS)
1
2
Close all applications.
Choose the Uninstall Program as follows:
– (Windows Vista/XP/Server 2003)
From the Start menu, choose All programs, KONICA MINOLTA,
pagepro 4650(5650), and then Uninstall Printer Driver.
– (Windows 2000)
3
4
5
6
14
From the Start menu, choose Programs, KONICA MINOLTA,
pagepro 4650(5650), and then Uninstall Printer Driver.
When the Uninstall dialog box appears, select the name of the driver to be
deleted, and then click the Uninstall button.
Click Uninstall.
Click OK, and restart your computer.
The KONICA MINOLTA pagepro 4650 printer driver or pagepro 5650
printer driver will be uninstalled from your computer.
Uninstalling the Printer Driver (for Windows)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Displaying Printer Driver Settings
(for Windows)
Windows Vista
1
2
From the Start menu, click Control Panel, then Hardware and Sound,
and then click Printers to open the Printers directory.
Right-click the KONICA MINOLTA pagepro 4650(5650) PCL or KONICA
MINOLTA pagepro 4650(5650) PS printer icon and choose Printer Preferences.
Windows XP/Server 2003
1
2
From the Start menu, choose Printers and Faxes to display the Printers
and Faxes directory.
Right-click the KONICA MINOLTA pagepro 4650(5650) PCL or KONICA
MINOLTA pagepro 4650(5650) PS printer icon and choose Printing Preferences.
Windows 2000
1
2
From the Start menu, point to Settings, and then click Printers to display
the Printers directory.
Right-click the KONICA MINOLTA pagepro 4650(5650) PCL or KONICA
MINOLTA pagepro 4650(5650) PS printer icon and choose Printer Properties.
Displaying Printer Driver Settings (for Windows)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
15
Using the Postscript and PCL Printer Driver
Common Buttons
The buttons described below appear on each tab.
OK
Click to exit the Properties dialog box, saving any changes made.
Cancel
Click to exit the Properties dialog box without saving any changes made.
Apply
Click to save all changes without exiting the Properties dialog box.
Help
Click to view the help.
Favorite Setting
This allows the current settings to be saved. To save the current settings,
specify the desired settings, and then click Add. Specify the settings
described below, and the click OK.
„ Name: Type in the name of the settings to be saved.
„ Comment: Add a simple comment to the settings to be saved.
„ Icon: Select an icon from the icon list to easily identify the settings. The
selected icon appears in the drop-down list.
„ Sharing: Specify whether or not the settings to be saved can be used by
other users logged onto the computer.
Afterward, the saved settings can be selected from the drop-down list. To
change the registered setting, click Edit.
Select Defaults from the drop-down list to reset the functions in all tabs to
their default values.
16
Using the Postscript and PCL Printer Driver
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Paper View
Click the button to display a sample of the page layout in the figure area.
"
This button does not appear on the Advanced and Quality tabs.
Printer View
Click the button to display an image of the printer (with all installed options) in
the figure area.
"
This button does not appear on the Advanced tab.
Quality View
Click this button to display a sample of the settings selected in the Quality
tab.
Default
Click this button to reset the settings to their defaults.
"
This button does not appear on the Advanced tab.
Advanced Tab (PostScript Printer Driver Only)
The Advanced Tab allows you to
„ Select whether to enable or disable the settings for advanced printing
functions (such as booklet printing)
„ Specify the PostScript output method
„ Specify whether or not the error messages of a print job are printed
„ Print a mirror image
„ Specify whether or not the application can directly output PostScript data
„ Specify whether or not the Negative Output is performed
Basic Tab
The Basic Tab allows you to
„ Specify the orientation of the media
„ Specify the size of the original document
„ Select the output media size
Using the Postscript and PCL Printer Driver
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
17
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Specify the number of copies
„ Turn on/off job collation
„ Turn on/off offset
„ Save a print job on the printer and print it later (Job Retention)
„ Save a confidential job on the printer and protect it with a password
„ Print a single copy for proofing
„ Specify user authentication and account track settings
„ Print on the back side of paper that has already been printed on
"
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color laser
printer/copier
- Paper that has been printed on with any other printer or fax machine
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Specify booklet printing
„ Rotate the print image 180 degrees
„ Specify duplex (double-sided) printing
„ Specify whether or not blank pages are printed (PCL printer driver only)
„ Adjust the binding margin
„ Specify the position on the paper where the document is to be printed
„ Adjust the printing position (PCL printer driver only)
Finish tab
The Finish Tab allows you to specify the output tray to use.
Cover Page Tab
The Cover Page Tab allows you to
„ Print front and back cover pages and separator pages
18
Using the Postscript and PCL Printer Driver
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
„ Specify the tray that contains the paper for the front and back cover pages
and separator pages.
Watermark/Overlay Tab
"
Be sure to use overlays with print jobs with a paper size and orientation that matches the overlay form.
In addition, if settings have been specified for “N-up” or “Booklet” in
the printer driver, the overlay form cannot be adjusted to match the
specified settings.
The settings in the “Overlay” function of the Watermark/Overlay tab allows
you to
„ Select the form to use
„ Add or delete overlay files
„ Launch Download Manager to download a form (PostScript printer driver
only)
"
Download Manager Application should be installed earlier.
„ Create a form (PCL printer driver only)
„ Specify that the document and form are printed overlapping (PCL printer
driver only)
„ Display the form information (PCL printer driver only)
„ Print the form on All Pages, First Page, Even Pages and Odd Pages
„ Place the form in back of the document or in front on the printed document (PCL printer driver only)
The settings in the “Watermark” function of the Watermark/Overlay tab allows
you to
„ Select the watermark to be used
„ Create, edit or delete watermarks
„ Lighten the density of the watermark
„ Print a frame around watermarks
„ Print transparent (shaded) watermarks
„ Print the watermark on only the first page
„ Print the watermark repeatedly throughout the all pages
Quality Tab
The Quality Tab allows you to
„ Specify the printer settings (Quick Settings)
Using the Postscript and PCL Printer Driver
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
19
„ Specify the resolution for the printout
„ Select whether or not economy printing is used
„ Specify the format of fonts that are to be downloaded
„ Print using the printer’s fonts
„ Control the tones (Contrast) of an image (PCL printer driver only)
„ Control the darkness (Brightness) of an image
„ Specify the amount of details in graphic patterns (PCL printer driver only)
Other Tab
The Other Tab allows you to
„ Select that Microsoft Excel sheets are not to be divided when printing
„ Select that the white background of Microsoft PowerPoint data does not
hide overlay files (PCL printer driver only)
„ Send a notification by e-mail when printing is finished
„ Shows the version information for the printer driver
„ Prevent loss when printing fine lines
Limitations on printer driver functions installed with
Point and Print
If Point and Print is performed with the following server and client combinations, there are limitations on some printer driver functions.
„ Server and client combinations
Server: Windows Server 2003/Vista/XP/2000
Client: Windows Server 2003/Vista/XP/2000
„ Functions with limitations applied
Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separator Page, Create Overlay, Print Overlay, Watermark
*JOBNAME, USERNAME, and HOSTNAME output of PJL
20
Using the Postscript and PCL Printer Driver
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Using the Status
Monitor
(Windows Only)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Working with the Status Monitor
Introduction
The Status Monitor shows information about the current status of the printer.
The Status Monitor can be installed from the Utilities and Documentation
CD-ROM.
For details on the installation, refer to the Reference Guide on the Utilities
and Documentation CD-ROM.
Operating Environment
The Status Monitor can be used on computers running Windows Vista/XP/
Server 2003/2000 connected to the printer using an Ethernet connection.
Opening the Status Monitor
Use one of the following steps to open the Status Monitor:
„ Windows Vista/XP/Server 2003—From the Start menu, choose All Programs, KONICA MINOLTA, and then Status Monitor. Double-click the
Status Monitor icon displayed in the task bar.
„ Windows 2000—From the Start menu, choose Programs, KONICA
MINOLTA, and then Status Monitor. Double-click the Status Monitor icon
displayed in the task bar.
Using the Status Monitor
Status Tab
„ Select Printer—Selects the printer whose status is displayed. In addition,
the messages that appear in the message window of the selected printer
are displayed.
„ Graphic—Shows a graphic representation of the printer and indicates
where the problem is. When the background of the printer graphic is red
or yellow, there is an error and the job has been interrupted.
„ Advanced Options—Click Advanced Options to display the Advanced
Options dialog box. From the Advanced Options dialog box, select
whether the Status Monitor automatically starts when the operating system is started and whether error notifications are sent by e-mail.
„ Order Supplies—Click Order Supplies to automatically access the order
page for supplies. The address of the page that is accessed can be specified from the Advanced Options dialog box.
22
Working with the Status Monitor
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
„ Printer Alerts—Displays text messages that alert you of conditions such
as low toner.
„ Recovery Instructions—Provides you with explanations of what you
need to do in order to correct problems and recover from error conditions.
Consumables Tab
Displays the usage status (approximate percentage remaining) of each consumables.
„ Order Supplies—Click Order Supplies to automatically access the order
page for supplies. The address of the page that is accessed can be specified from the Advanced Options dialog box.
„ Refresh—Rechecks the supplies and displays their status.
"
Click Help to display windows containing explanations of the Status
Monitor functions. Refer to this help for detailed information.
Recognizing Status Monitor Alerts
When the Status Monitor detects a printing problem, the icon on the Windows
task bar changes from green (normal) to yellow (warning), magenta or red
(error), depending on the severity of the printer problem.
Recovering from a Status Monitor Alert
When the Status Monitor notifies you of a printing problem, double-click its
icon on the Windows task bar to open the Status Monitor. The Status Monitor
identifies what type of error has occurred.
Closing the Status Monitor
Click Close to close the Status Monitor window. To exit Status Monitor,
right-click the Status Monitor icon in the taskbar, and then click Exit.
Recognizing Status Monitor Alerts
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
23
24
Closing the Status Monitor
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Printer Control
Panel and
Configuration
Menu
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
About the Control Panel
The control panel, located on the top of the printer, allows you to direct the
printer’s operation. In addition, it displays the current status of the printer,
including any condition that needs your attention.
2
3
4
1
7
6
5
Control Panel Keys and Port
No.
1
Item
Explanation
„ Cancels the currently displayed menu or menu
choice
„ Allows you to cancel one or all print jobs that
are currently being printed or processed:
1. Press the Cancel key.
2. Press the
or
keys to select either CUR-
RENT JOB or ALL JOBS.
3. Press the Menu/Select key.
The print job(s) is (are) cancelled.
2
„ Enters the menu system
„ Moves down in the menu structure
„ Applies the selected setting
„
26
appears in the message window
About the Control Panel
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
No.
Item
3
Explanation
„ Moves the cursor up
„ Returns to the status screen from the help
screen
„ Within a menu choice that is changeable character by character, scrolls upward through the
available characters
„
4
,
appears in the message window
„ Moves the cursor to the right
„ Displays the next help screen
„
5
appears in the message window
„ Moves the cursor down
„ Displays the help screen when an error occurs
„ Within a menu choice that is changeable character by character, scrolls downward through
the available characters
„
6
,
appears in the message window
„ Moves the cursor to the left
„ Displays the previous help screen
„
7
Memory Direct
Print Port
appears in the message window
Used to plug the USB memory device into this port
for printing PDF, XPS, JPEG, and TIFF files saved
on the memory device. For details, refer to
“MEMORY DIRECT” on page 52.
About the Control Panel
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
27
Message Window
The current status of the printer, the amount of toner remaining, and any error
messages can be viewed from the message window.
1
2
3
4
5
No.
Details
1
The printer status is indicated by the color of the indicator and lighting/flashing of the message window.
„ READY: Indicator lit up in blue and window lit up
„ PROCESSING or PRINTING: Indicator flashing and window lit up
„ ENERGY SAVE: Indicator lit up in blue and window goes off
„ ERROR: Indicator lit up in red and window lit up
2
The current status of the printer is displayed.
„ If the operator or service representative must be called, the symbol
and the error status are displayed.
„ If a warning occurs, the symbol
appears.
„ When a USB memory device is plugged into the Memory Direct
Print Port, the symbol
sage window.
appears on the right side of the mes-
„ While a print job is being received, the symbol
right side of the message window.
3
appears on the
„ Error messages are displayed.
„ While a print job is being received, the user name and the print
progress are displayed.
„ While updating the firmware, the type of firmware being updated
and the update progress are displayed.
28
4
Key information is displayed.
5
The approximate amount of toner remaining is displayed.
About the Control Panel
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Help Screens
The help screens appear when the
key is pressed after an error occurred,
such as a media misfeed, so that the error can be corrected.
About the Control Panel
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
29
Configuration Menu Overview
The configuration menu accessible from the control panel is structured as
shown below.
Main Menu
READY
PROOF/
PRINT MENU*
PRINT
MENU
PAPER
MENU
QUALITY
MENU
MEMORY DIRECT**
INTERFACE
MENU
SYS DEFAULT
MENU
MAINTENANCE
MENU
SERVICE
MENU
"
"
30
* This menu item appears only if an optional hard disk kit is installed.
** This menu item appears when an optional hard disk kit or a CompactFlash card is installed, and INTERFACE MENU/MEMORY
DIRECT is set to ENABLE.
MEMORY DIRECT does not appear if public user access has not
been permitted through authentication settings. For details on the
authentication settings, refer to the Reference Guide on the Utilities
and Documentation CD-ROM.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
PROOF/PRINT MENU
"
This menu item appears only if an optional hard disk kit is installed.
With this menu item, print jobs that were set to be saved on the hard disk by
using Job Retention on the Basic tab of the printer driver can be printed or
deleted.
"
All factory default values are shown in bold.
PROOF/
PRINT MENU
“User name”
“Job name”
PRINT
DELETE
“Job name”
COPIES
1
“Job name”
YES
NO
Printing/Deleting a Stored Job
1
Follow the procedure described below to select a job.
Press Key
Until Display Reads
PROOF/PRINT MENU
“User name”
If no print jobs have been stored on the hard disk,
NO STORED JOB appears.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
31
Press Key
Until Display Reads
Desired user name
,
Press until the desired
user name appears.
“Job name”
Desired job name
,
Press until the desired
job name appears.
PRINT
DELETE
If the selected print job was set as a secured job
from the printer driver, a screen for entering the
password appears. For details on typing the
password, refer to “Entering the Password” on page
33.
2
Select PRINT or DELETE, and then press the Menu/Select key.
"
3
4
5
6
If PRINT was selected, continue with step 3.
If DELETE was selected, continue with step 5.
Press the
and
keys to specify the number of copies to be printed.
(Settings: 1 to 999; Default: 1)
Press the Menu/Select key.
Printing begins.
Select YES or NO.
Press the Menu/Select key.
If YES was selected, the print job is deleted.
If NO was selected, the PRINT/DELETE selection screen appears
again.
32
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Entering the Password
If the print job selected in the PROOF/PRINT MENU is a secured job, a
screen for entering the password appears. Follow the procedure described
below to type in the four-digit password specified from the printer driver.
1
2
3
4
5
Press the
word.
to increase or the
to decrease the first digit of the pass-
Press the
key to move the cursor to the next digit.
Press the
password.
to increase or the
to decrease the second digit of the
Continue these steps until all four digits of the password are specified.
Press the Menu/Select key.
The PRINT/DELETE selection screen appears.
"
If an incorrect password is entered, INVALID ENTRY appears and
the screen for entering the password appears again.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
33
PRINT MENU
With this menu, printer information, such as the configuration page and the
demo page, can be printed.
PRINT MENU
CONFIGURATION
PG
STATISTICS PAGE
FONT LIST
POSTSCRIPT
PCL
MENU MAP
DIRECTORY LIST*
"
"
* This menu item appears only if an optional hard disk kit or a CompactFlash card is installed.
All factory default values are shown in bold.
CONFIGURATION PG
Settings
STATISTICS
PAGE
Settings
FONT LIST
POST
SCRIPT
Settings
PCL
Settings
PRINT/CANCEL
Prints the configuration page.
PRINT/CANCEL
Prints the statistics page such as the number of pages
printed.
PRINT/CANCEL
Prints the PostScript font list.
PRINT/CANCEL
Prints the PCL font list.
MENU MAP
Settings
PRINT/CANCEL
Prints the menu map.
34
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
DIRECTORY
LIST
Settings
PRINT/CANCEL
Prints the directory list of the hard disk or CompactFlash
card.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
35
PAPER MENU
With this menu, the paper used for printing can be managed.
PAPER MENU
PAPER SOURCE
DEFAULT TRAY
DUPLEX***
TRAY 1
PAPER SIZE
COPIES
CUSTOM SIZE*
COLLATE****
PAPER TYPE
FINISHING*****
SIZE SETTING
JOB
SEPARATION*****
TRAY 2
PAPER SIZE
CUSTOM SIZE*
PAPER TYPE
SIZE SETTING
TRAY 3**
PAPER SIZE
CUSTOM SIZE*
PAPER TYPE
SIZE SETTING
36
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
TRAY 4**
PAPER SIZE
CUSTOM SIZE*
PAPER TYPE
SIZE SETTING
TRAY CHAINING
TRAY MAPPING
TRAY MAPPING
MODE
LOGICAL TRAY
0
LOGICAL TRAY
9
"
* This menu item appears only when you select CUSTOM from the
TRAY X/PAPER SIZE menu.
** These menu items appear only if one or both of the optional lower
feeder units are installed.
*** This menu item appears only if a duplex is installed.
**** This menu item appears only if an optional hard disk kit or a CompactFlash card of 1 GB or more is installed.
***** This menu item appears only if the optional offset tray is installed.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
37
"
All factory default values are shown in bold.
PAPER DEFAULT Settings
SOURCE TRAY
TRAY 1/TRAY 2/
TRAY 3/TRAY 4
Select the setting for the default tray.
" TRAY
3 and TRAY 4 appear only if the
optional lower feeder units are installed.
TRAY 1
PAPER
SIZE
Settings
ANY/LETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/KAI 16/KAI
32/ENV C5/ENV C6/ENV
DL/ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper
loaded into Tray 1.
" The default setting for North
America is LETTER. The default
setting for all other regions is A4.
" If AUTO is selected from the PAPER
MENU/PAPER SOURCE/TRAY
1/SIZE SETTING menu, the
printer automatically detects the
paper size.
38
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
CUSTOM Specify the paper size when custom-sized
paper is loaded into Tray 1.
SIZE
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE setting.
Setting range for WIDTH
„ For MILLIMETERS: 76 to 216 mm
(default)
– North America: 216 mm
– All other regions: 210 mm
„ For INCHES: 3.00 to 8.50 inches
(default)
– North America: 8.50 inches
– All other regions: 8.27 inches
Setting range for LENGTH
„ For MILLIMETERS: 127 to 900 mm
(default)
– North America: 279 mm
– All other regions: 297 mm
„ For INCHES: 5.00 to
35.43 inches
(default)
– North America: 11.00 inches
– All other regions: 11.69 inches
" This menu item appears only if
PAPER SIZE is set to CUSTOM.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
39
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper
loaded into Tray 1.
" THICK
3 and THIN PAPER are
selectable for pagepro 5650EN only.
SIZE
SETTING
Settings
AUTO/USER SELECT
If AUTO is selected, the printer
automatically detects the paper size.
If USER SELECT is selected, a user can
select the paper size.
TRAY 2
PAPER
SIZE
Settings
LETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/KAI 16/KAI
32/ENV C6/ENV DL/ENV
MONARCH/ENV CHOU#3/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper
loaded into Tray 2.
" The default setting for North
America is LETTER. The default
setting for all other regions is A4.
" If AUTO is selected from the PAPER
MENU/PAPER SOURCE/TRAY
2/SIZE SETTING menu, the
printer automatically detects the
paper size.
40
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
CUSTOM Specify the paper size when custom-sized
paper is loaded into Tray 2.
SIZE
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE setting.
Setting range for WIDTH
„ For MILLIMETERS: 98 to 216 mm
(default)
– North America: 216 mm
– All other regions: 210 mm
„ For INCHES: 3.87 to 8.50 inches
(default)
– North America: 8.50 inches
– All other regions: 8.27 inches
Setting range for LENGTH
„ For MILLIMETERS: 148 to 356 mm
(default)
– North America: 279 mm
– All other regions: 297 mm
„ For INCHES: 5.83 to
14.00 inches
(default)
– North America:11.00 inches
– All other regions: 11.69 inches
This menu item appears only if PAPER
SIZE is set to CUSTOM.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
41
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper
loaded into Tray 2.
" THICK
3 and THIN PAPER are
selectable for pagepro 5650EN only.
SIZE
SETTING
Settings
AUTO/USER SELECT
If AUTO is selected, the printer
automatically detects the paper size.
If USER SELECT is selected, a user can
select the paper size.
TRAY 3
PAPER
SIZE
Settings
LETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/KAI 16/KAI
32/ENV C6/ENV DL/ENV
MONARCH/ENV CHOU#3/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper
loaded into Tray 3.
" The default setting for North
America is LETTER. The default
setting for all other regions is A4.
" If AUTO is selected from the PAPER
MENU/PAPER SOURCE/TRAY
3/SIZE SETTING menu, the
printer automatically detects the
paper size.
42
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
CUSTOM Specify the paper size when custom-sized
paper is loaded into Tray 3.
SIZE
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE setting.
Setting range for WIDTH
„ For MILLIMETERS: 98 to 216 mm
(default)
– North America: 216 mm
– All other regions: 210 mm
„ For INCHES: 3.87 to 8.50 inches
(default)
– North America: 8.50 inches
– All other regions: 8.27 inches
Setting range for LENGTH
„ For MILLIMETERS: 148 to 356 mm
(default)
– North America: 279 mm
– All other regions: 297 mm
„ For INCHES: 5.83 to
14.00 inches
(default)
– North America:11.00 inches
– All other regions: 11.69 inches
This menu item appears only if PAPER
SIZE is set to CUSTOM.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
43
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper
loaded into Tray 3.
" THICK
3 and THIN PAPER are
selectable for pagepro 5650EN only.
SIZE
SETTING
Settings
AUTO/USER SELECT
If AUTO is selected, the printer
automatically detects the paper size.
If USER SELECT is selected, a user can
select the paper size.
TRAY 4
PAPER
SIZE
Settings
LETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/KAI 16/KAI
32/ENV C6/ENV DL/ENV
MONARCH/ENV CHOU#3/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper
loaded into Tray 4.
" The default setting for North
America is LETTER. The default
setting for all other regions is A4.
" If AUTO is selected from the PAPER
MENU/PAPER SOURCE/TRAY
4/SIZE SETTING menu, the
printer automatically detects the
paper size.
44
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
CUSTOM Specify the paper size when custom-sized
paper is loaded into Tray 4.
SIZE
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE setting.
Setting range for WIDTH
„ For MILLIMETERS: 98 to 216 mm
(default)
– North America: 216 mm
– All other regions: 210 mm
„ For INCHES: 3.87 to 8.50 inches
(default)
– North America: 8.50 inches
– All other regions: 8.27 inches
Setting range for LENGTH
„ For MILLIMETERS: 148 to 356 mm
(default)
– North America: 279 mm
– All other regions: 297 mm
„ For INCHES: 5.83 to
14.00 inches
(default)
– North America:11.00 inches
– All other regions: 11.69 inches
This menu item appears only if PAPER
SIZE is set to CUSTOM.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
45
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper
loaded into Tray 4.
" THICK
3 and THIN PAPER are
selectable for pagepro 5650EN only.
SIZE
SETTING
Settings
AUTO/USER SELECT
If AUTO is selected, the printer
automatically detects the paper size.
If USER SELECT is selected, a user can
select the paper size.
Settings ON/OFF
TRAY
CHAINING If ON is selected and the specified tray runs out of
paper during printing, a tray loaded with paper of the
same size is automatically selected so printing can
continue.
If OFF is selected and the specified tray runs out of
paper, printing stops.
Settings ON/OFF
TRAY
TRAY
MAPPING MAPPING Select whether or not the Tray Mapping
MODE
function is used.
46
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
LOGICAL Settings
TRAY
0-9
PHYSICAL
PHYSICAL
PHYSICAL
PHYSICAL
TRAY1/
TRAY2/
TRAY3/
TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL TRAY
2 is PHYSICAL TRAY 2. The default
settings for all other trays are PHYSICAL TRAY 1.
" PHYSICAL
TRAY3 and
PHYSICAL TRAY4 appear only if
an optional lower feeder unit is
installed.
DUPLEX Settings
OFF/LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides
of the paper for long-edge binding.
If SHORT EDGE is selected, the pages will be printed on both
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu
setting.
COPIES Settings
1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu
setting.
COLLATE Settings
ON/OFF
If ON is selected, all pages of the document are printed before the
next copy is printed.
If OFF is selected, all copies of the document are not printed
separately.
The setting specified in the printer driver will override this menu
setting.
" This menu item appears only if an optional hard disk kit or a
CompactFlash card of 1 GB or more is installed.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
47
Settings
FINSUB TRAY/MAIN TRAY/OFFSET
ISHING When SUB TRAY is selected, the paper is fed to the sub output
tray.
When MAIN TRAY is selected, the paper is fed to the main output tray.
When OFFSET is selected, the paper is fed to the sub output tray
with each copy slightly shifted.
The setting specified in the printer driver will override this menu
setting.
" The paper size available for SUB
TRAY or OFFSET is as
follows:
Width: 89 to 216 mm (3.5 to 8.5 inches)
Length: 140 to 356 mm (5.5 to 14.0 inches)
" OFFSET can be set only when COLLATE is ON.
Settings
JOB
ON/OFF
SEPA- The paper is fed to the sub output tray with each print job slightly
RATION shifted.
" If FINISHING is set to MAIN
TRAY, the print jobs are fed
out stacked on the top of each other without being shifted.
48
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
QUALITY MENU
With this menu, settings for the print quality can be specified.
QUALITY MENU
RESOLUTION
BRIGHTNESS
CONTRAST
HALFTONE
IMAGE PRINTING
ECONOMY PRINT
TEXT PRINTING
GRAPHICS
PRINTING
"
All factory default values are shown in bold.
RESOLUTION
Settings
BRIGHTNESS
Settings
600/1200
The resolution of the print image (600dpi or 1200dpi) can be
specified.
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be adjusted.
CONTRAST
Settings
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the print image can be adjusted.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
49
HALFTONE
IMAGE
PRINTING
Settings
LINE ART/DETAIL/
SMOOTH
Select how halftones in images are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
TEXT
PRINTING
Settings
LINE ART/DETAIL/
SMOOTH
Select how halftones in text are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
GRAPHICS
PRINTING
Settings
LINE ART/DETAIL/
SMOOTH
Select how halftones in graphics are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
50
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
ECONOMY
PRINT
Settings
ON/OFF
Select whether to print graphics with a reduced density by
reducing the amount of toner that is used.
If ON is selected, the amount of toner used is reduced when
printing.
If OFF is selected, the amount of toner used is not reduced
when printing.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
51
MEMORY DIRECT
This menu item appears when an optional hard disk kit or a CompactFlash
card is installed, and INTERFACE MENU/MEMORY DIRECT is set to
ENABLE.
In addition, this menu item does not appear if public user access has not
been permitted through authentication settings. For details on the authentication settings, refer to the Reference Guide on the Utilities and Documentation
CD-ROM.
With this menu, settings for “memory direct” function can be specified.
"
For details on memory direct, refer to “Memory Direct” on page 80.
MEMORY DIRECT
LIST OF FILES*
TYPE OF FILES
"
"
* This menu items appears when a USB memory device is plugged
into the memory direct print port on the control panel.
All factory default values are shown in bold.
LIST
OF
FILES
Select the file that you wish to output, and then press the Menu/
Select key.
If the file to be printed is in a folder, select the folder, and then
press the Menu/Select key.
Settings
PRINT
Select this setting to output a file.
Settings
CANCEL
Select this setting to stop outputting and to return to the file list.
52
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
LETTER/ Settings
A4
LETTER/LEGAL/EXECUTIVE/A4/
A5/A6/B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/FOLIO/SP
FOLIO/UK QUARTO/FOOLSCAP/
GOVT LEGAL/16K/KAI 16/KAI
32/ENV C5/ENV C6/ENV DL/ENV
MONARCH/ENV CHOU#3/ENV
CHOU#4/B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/CUSTOM
Change the size of the paper.
" The value selected for SYS
DEFAULT
MENU/DEFAULT PAPER is displayed as the
default for this setting.
" This menu item does not appear if the
selected file type is a PDF file or an XPS file.
Settings
DUPLEX:
LONG EDGE/SHORT EDGE/OFF
OFF
Select whether to perform duplex printing.
If LONG EDGE is selected, the page will be printed
on both sides of the paper for long edge binding.
If SHORT EDGE is selected, the page will be
printed on both sides of the paper for short edge
binding.
If OFF is selected, duplex printing is not performed.
" This menu item appears only if a duplex is
installed.
COPIES:1 Settings
1-9999
Specify the number of copies to be printed (between
1 and 9999).
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
53
COLLATE Settings
ON/OFF
Select whether to collate the copies.
If ON is selected, collated printing is performed.
If OFF is selected, collated printing is not performed.
" This menu item appears only if an optional
hard disk kit or a CompactFlash card of 1GB
or more is installed.
MAIN
TRAY
Settings
SUB TRAY/MAIN TRAY/OFFSET
Select the output tray and finishing settings.
When SUB TRAY is selected, the paper is fed to
the sub output tray.
When MAIN TRAY is selected, the paper is fed to
the main output tray.
When OFFSET is selected, the paper is fed to the
sub output tray with each copy slightly shifted.
" This menu item appears only if the optional
offset tray is installed.
TYPE
OF
FILES
54
Settings
PDF,XPS,JPEG,TIFF/PDF,XPS
Select the type of files to be displayed.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
INTERFACE MENU
With this menu, interface settings can be specified.
"
Restart the printer after changing settings in the ETHERNET menu.
INTERFACE MENU
JOB TIMEOUT
ETHERNET
TCP/IP
MEMORY
DIRECT**
ENABLE
IP ADDRESS*
SUBNET MASK*
DEFAULT
GATEWAY*
DHCP*
BOOTP*
ARP/PING*
HTTP*
ENABLE
FTP*
ENABLE
TELNET*
BONJOUR*
ENABLE
DYNAMIC DNS*
ENABLE
IPP*
ENABLE
RAW PORT*
ENABLE
BIDIRECTIONAL
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
55
SLP*
ENABLE
SMTP*
ENABLE
SNMP*
ENABLE
WSD PRINT*
ENABLE
IPSEC*
ENABLE
IP ADDRESS
FILTER*
ACCESS PERMISSION
ACCESS
REFUSE
IPv6*
ENABLE
AUTO SETTING
LINK LOCAL
GLOBAL
ADDRESS
GATEWAY
ADDRESS
NETWARE
ENABLE
APPLETALK
ENABLE
SPEED/DUPLEX
IEEE802.1X
"
"
56
*
ENABLE
These menu items appear when INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE is set to YES.
* This menu item appears only if an optional hard disk kit or a CompactFlash card is installed.
*
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"
All factory default values are shown in bold.
JOB
TIMEOUT
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER- TCP/IP
NET
ENABLE Settings
YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
Setting
IP
000.000.000.000
ADDRESS Set the IP address for this printer on the
network.
Use the
,
,
specify the value.
, and
keys to
If the IP address is manually specified,
DHCP/BOOTP is automatically set to
OFF.
SUBNET Setting 255.255.000.000
MASK
Specify the subnet mask for the network.
Use the
,
,
specify the value.
, and
keys to
DEFAULT Setting 000.000.000.000
GATEWAY Specify the IP address of the router if one
is on the network. Use the
and
DHCP
Settings
,
,
,
keys to specify the value.
ON/OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is automatically acquired.
If OFF is selected, the IP address is not
automatically acquired.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
57
BOOTP
Settings
ON/OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is automatically acquired.
If OFF is selected, the IP address is not
automatically acquired.
ARP/
PING
Settings
ON/OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is automatically acquired.
If OFF is selected, the IP address is not
automatically acquired.
HTTP
ENABLE Settings
YES/NO
If YES is selected, HTTP is
enabled.
If NO is selected, HTTP is
disabled.
FTP
ENABLE Settings
YES/NO
If YES is selected, FTP is
enabled.
If NO is selected, FTP is
disabled.
TELNET Settings
ENABLE/DISABLE
Select whether to enable or disable Telnet transmissions.
When ENABLE is selected, Telnet transmissions are enabled.
When DISABLE is selected, Telnet
transmissions are disabled.
58
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
BONJOUR
ENABLE Settings
YES/NO
If YES is selected, BONJOUR
is enabled.
If NO is selected, BONJOUR is
disabled.
DYNAMIC ENABLE Settings YES/NO
DNS
If YES is selected, DYNAMIC
DNS is enabled.
If NO is selected, DYNAMIC
DNS is disabled.
IPP
ENABLE Settings
YES/NO
If YES is selected, IPP is
enabled.
If NO is selected, IPP is disabled.
RAW
PORT
ENABLE Settings
YES/NO
If YES is selected, RAW
PORT is enabled.
If NO is selected, RAW PORT
is disabled.
BIDI- Settings ON/OFF
RECIf ON is selected, RAW PORT
TIONAL is enabled for bi-directional
communication.
If OFF is selected, RAW
PORT is disabled for bi-directional communication.
SLP
ENABLE Settings
YES/NO
If YES is selected, SLP is
enabled.
If NO is selected, SLP is disabled.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
59
SMTP
ENABLE Settings
YES/NO
If YES is selected, SMTP is
enabled.
If NO is selected, SMTP is disabled.
SNMP
ENABLE Settings
YES/NO
If YES is selected, SNMP is
enabled.
If NO is selected, SNMP is disabled.
WSD
PRINT
ENABLE Settings
YES/NO
If YES is selected, WSD
PRINT is enabled.
If NO is selected, WSD
PRINT is disabled.
IPSEC
ENABLE Settings
YES/NO
If YES is selected, IPSEC is
enabled.
If NO is selected, IPSEC is
disabled.
IP
ACCESS Settings ENABLE/
ACCESS PERDISABLE
FILTER MISIf ENABLE is selected,
SION
ACCESS PERMISSION is
enabled.
If DISABLE is selected,
ACCESS PERMISSION is
disabled.
ACCESS Settings
REFUSE
ENABLE/
DISABLE
If ENABLE is selected,
ACCESS REFUSE is
enabled.
If DISABLE is selected,
ACCESS REFUSE is disabled.
60
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
IPv6
ENABLE Settings
YES/NO
If YES is selected, IPv6 is
enabled.
If NO is selected, IPv6 is disabled.
AUTO
SETTING
Settings
YES/NO
If YES is selected, IPv6
address is automatically
obtained.
If NO is selected, IPv6 auto
configuration is disabled.
LINK
LOCAL
Displays the link-local address
of IPv6.
GLOBAL Displays the global address of
ADDRESS IPv6.
Displays the gateway address
GATEof IPv6.
WAY
ADDRESS
NETWARE ENABLE Settings
YES/NO
If YES is selected, NetWare is enabled.
If NO is selected, NetWare is disabled.
APPLE
TALK
ENABLE Settings
YES/NO
If YES is selected, AppleTalk is enabled.
If NO is selected, AppleTalk is disabled.
SPEED/
DUPLEX
Settings
AUTO/10BASE FULL/10BASE
HALF/100BASE FULL/100BASE
HALF/1000BASE FULL
Specify the transmission speed for the network and
the transmission method for bi-directional
transmission.
IEEE802. ENABLE Settings YES/NO
1X
If YES is selected, IEEE802.1X is
enabled.
If NO is selected, IEEE802.1X is
disabled.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
61
MEMORY Settings
ENABLE/DISABLE
DIRECT Select whether to enable or disable memory direct printing.
If ENABLE is selected, memory direct printing is enabled.
If DISABLE is selected, memory direct printing is disabled.
62
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer,
such as the display language of the message window and the time until the
machine enters Energy Saver mode.
SYS DEFAULT MENU
LANGUAGE
EMULATION
DEF.
EMULATION
POSTSCRIPT
WAIT
TIMEOUT
PS ERROR
PAGE
PS PROTOCOL
PCL
CR/LF
MAPPING
LINES PER
PAGE
XPS****
PAPER
STARTUP
OPTIONS
FONT SOURCE
FONT NUMBER
DIGITAL SIGNATURE
PITCH SIZE
(POINT SIZE)
XPS ERROR
PAGE
SYMBOL SET
DEFAULT
PAPER
PAPER SIZE
PAPER SIZE
ERROR
CUSTOM SIZE
UNIT OF
MEASURE
PAPER TYPE
DO STARTUP
PAGE
AUTO
CONTINUE
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
63
HOLD JOB
TIMEOUT*
ENERGY
SAVER TIME
MENU
TIMEOUT
LCD
CONTRAST
SECURITY
CHANGE
PASSWORD
LOCK PANEL
CLOCK
DATE
(xx.xx.xx)
TIME
TIME ZONE
HDD FORMAT*
USER AREA
ONLY
ALL
CARD FORMAT**
USER AREA
ONLY
ALL
RESTORE
DEFAULTS
RESTORE
NETWORK
RESTORE
PRINTER
RESTORE ALL
64
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
ENABLE
WARNING
PAPER EMPTY
TRAY1
TRAY2
TRAY3***
TRAY4***
PAPER LOW
TRAY2
TONER LOW
TRAY3***
TRAY4***
"
* This menu item appears only if an optional hard disk kit is installed.
** This menu item appears only if an optional CompactFlash card is
installed.
*** These menu items appear only if the optional lower feeder unit is
installed.
**** This menu item appears only if an optional hard disk kit or a CompactFlash card is installed.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
65
"
All factory default values are shown in bold.
LANGUAGE
Settings
ENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH/RUSSIAN/
POLISH
The display language of the message window can be changed
to the selected language.
The language selections appear in the message window in the
corresponding language. For example, GERMAN appears as
DEUTSCH.
Settings AUTO/POSTSCRIPT/PCL
EMULA- DEF.
TION
EMULA- Specify the printer emulation language.
TION
If AUTO is selected, the printer automatically selects
the printer emulation language from the data stream.
POST- WAIT
SCRIPT TIME
OUT
Settings
0-300
Specify the time until an error is
determined to be a PostScript error.
If 0 is selected, no timeout is performed.
PS
ERROR
PAGE
Settings
ON/OFF
Select whether or not an error page is
printed when a Postscript error occurs.
Settings AUTO/NORMAL/BINARY
PS
PROTO- Specify the protocol for data transmissions
COL
with a PostScript data stream.
If AUTO is selected, the printer
automatically selects an applicable
protocol from the data stream.
66
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
PCL
CR/LF
MAPPING
Settings
CR=CR LF=LF/CR=CRLF
LF=LF/CR=CR
LF=LFCR/CR=CRLF
LF=LFCR
Select the definitions of the CR/LF codes
in the PCL language.
LINES
PER
PAGE
Settings
5-60-128
Specify the number of lines per page in the
PCL language.
Settings 0-102
FONT
FONT
SOURCE NUMBER Specify the default font in the
PCL language.
The font numbers that appear
correspond to the PCL font list.
For details on printing the font
list, refer to “PRINT MENU” on
page 34.
PITCH Settings
SIZE
(POINT
SIZE)
0.44-10.0099.99
(4.00-12.00999.75)
Specify the font size in the PCL
language.
If the selected FONT NUMBER
is for a bitmap font, PITCH
SIZE appears. If the selected
FONT NUMBER is for an
outline font, POINT SIZE
appears.
SYMBOL Specify the symbol set used
with the PCL language.
SET
The default setting is PC8.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
67
XPS
DIGI- Settings ENABLE/DISABLE
TAL
If ENABLE is selected, DIGITAL SIGSIGNA- NATURE is enabled.
TURE
If DISABLE is selected, DIGITAL
SIGNATURE is disabled.
XPS
ERROR
PAGE
Settings
ON/OFF
If ON is selected, an XPS error page is
printed when an XPS error occurs.
If OFF is selected, no XPS error page is
printed when an XPS error occurs.
PAPER
DEFAULT PAPER
PAPER SIZE
Settings
LETTER/LEGAL/EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/KAI 16/KAI
32/ENV C5/ENV C6/ENV
DL/ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the size of media that is normally
used.
" The default setting for North
America is LETTER. The default
setting for all other regions is A4.
68
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
CUSTOM Specify the media size when PAPER
SIZE
SIZE is set to CUSTOM.
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE setting.
Setting range for WIDTH
„ For MILLIMETERS: 76 to 216 mm
(default)
– North America: 216 mm
– All other regions: 210 mm
„ For INCHES: 3.00 to 8.50 inches
(default)
– North America: 8.50 inches
– All other regions: 8.27 inches
Setting range for LENGTH
„ For MILLIMETERS: 127 to 356 mm
(default)
– North America: 279 mm
– All other regions: 297 mm
„ For INCHES: 5.00 to
14.00 inches
(default)
– North America: 11.00 inches
– All other regions: 11.69 inches
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
69
PAPER
TYPE
Settings
PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the type of media that is normally
used.
" THICK 3 and THIN
PAPER are
selectable for pagepro 5650EN only.
PAPER
SIZE
ERROR
Settings
ENABLE/DISABLE
If ENABLE is selected, a paper size error is detected.
If DISABLE is selected, no paper size error is
detected.
UNIT
OF
MEASURE
Settings
INCHES/MILLIMETERS
The units for specifying the size of custom media can
be switched between inches and millimeters.
" The default setting for North America is
INCHES. The default setting for all other
regions is MILLIMETERS.
Settings ON/OFF
STARTUP DO
OPTIONS START- Select whether or not a startup page is printed when
UP
the printer is turned on.
PAGE
AUTO
CONTINUE
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If AUTO CONTINUE is set to ON, printing automatically continues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is different.
No media: PAPER EMPTY (Page 186)/TRAY EMPTY (Page
187)
Different media size/type: PAPER ERROR (Page 186)/TRAY x
PAPER ERR (Page 187)
70
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
HOLD
JOB
TIME
OUT
Settings
DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If DISABLE is selected, print jobs are not deleted
at a specific time.
ENERGY Settings 5 minutes/6 minutes/7 minutes/8
SAVER
minutes/9 minutes/10 minutes/11
TIME
minutes/12 minutes/13 minutes/14
minutes/15 minutes/30 minutes/1
hour
Specify the length of time until the machine enters Energy
Saver mode.
MENU
TIME
OUT
Settings
OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If OFF is selected, no
timeout occurs.
LCD
CONTRAST
Settings
SECURITY
CHANGE Specify the password for locking the control panel.
PASS- If the password is set to 0000 (default), the control
WORD
panel is not locked. In order to lock the control panel,
be sure to specify a password other than 0000.
-3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is -3 and the brightest level setting is
+3.
LOCK
PANEL
Settings
OFF/MINIMUM/ON
Specify how the control panel is locked.
If OFF is selected, the control panel is not locked.
If MINIMUM is selected, the INTERFACE MENU
and SYS DEFAULT MENU are protected with a
password.
If ON is selected, all menus are protected with a
password.
In order to lock the control panel, be sure to specify a
password other than 0000.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
71
CLOCK
Specify the date for the printer’s internal clock.
DATE
(xx.xx. The date for Asia and China is set in the order year,
xx)
month, then day (YY.MM.DD).
The date for the Americas is set in the order month,
day, then year (MM.DD.YY).
The date for Europe is set in the order day, month,
then year (DD.MM.YY).
TIME
Specify the time for the printer’s internal clock.
TIME
ZONE
Settings
HDD
USER
FORMAT AREA
ONLY
ALL
CARD
USER
FORMAT AREA
ONLY
ALL
-12:00-00:00-+13:00
Specify the time zone.
Initialize the user area of the hard disk. When this
menu item is selected, the printer is automatically
restarted.
Initialize the hard disk. When this menu item is
selected, the printer is automatically restarted.
Initialize the user area of the CompactFlash card.
When this menu item is selected, the printer is
automatically restarted.
Initialize the CompactFlash card. When this menu
item is selected, the printer is automatically restarted.
RESTORE RESTORE Reset the network settings to their defaults. When
DEFAULTS NETWORK this menu item is selected, the printer is
automatically restarted.
RESTORE Reset the printer settings to their defaults. When this
PRINTER menu item is selected, the printer is automatically
restarted.
RESTORE Reset all settings to their defaults. When this menu
item is selected, the printer is automatically restarted.
ALL
72
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
ENABLE PAPER
WARNING EMPTY
TRAY1
Settings
ON/OFF
Select whether or not a warning appears
when Tray 1 runs out of media.
TRAY2
Settings
ON/OFF
Select whether or not a warning appears
when Tray 2 runs out of media.
TRAY3
Settings
ON/OFF
Select whether or not a warning appears
when Tray 3 runs out of media.
TRAY4
Settings
ON/OFF
Select whether or not a warning appears
when Tray 4 runs out of media.
PAPER
LOW
TRAY2
Settings
ON/OFF
Select whether or not to display a warning
when Tray 2 is about to run out of media.
TRAY3
Settings
ON/OFF
Select whether or not to display a warning
when Tray 3 is about to run out of media.
TRAY4
Settings
ON/OFF
Select whether or not to display a warning
when Tray 4 is about to run out of media.
TONER
LOW
Settings
ON/OFF
Select whether or not to display a warning
when the toner is about to run out.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
73
MAINTENANCE MENU
With this menu, maintenance on this printer can be performed.
In order to use this menu, the administrator password must be entered.
MAINTENANCE MENU
PRINT MENU
EVENT LOG
HALFTONE 64
HALFTONE 128
HALFTONE 256
GRADATION
ALIGNMENT
TOP
ADJUSTMENT
TRAY1-4
THICK
DUPLEX
LEFT
ADJUSTMENT
LEFT ADJ
TRAY 1-4
LEFT ADJ
DUPLEX
LD POWER
VIDEO TIME
LAG
SUPPLIES
REPLACE
QUICK SETTING*
UPDATE SETTING
FUSER UNIT
BACKUP SETTING
74
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"
"
* This menu item appears only if a USB memory device is connected
to the printer.
All factory default values are shown in bold.
PRINT
MENU
EVENT
LOG
Settings
HALFTONE
64
Settings
HALFTONE
128
Settings
HALFTONE
256
Settings
PRINT/CANCEL
Prints the event log.
PRINT/CANCEL
Print halftones at 64 gradations.
PRINT/CANCEL
Print halftones at 128 gradations.
PRINT/CANCEL
Print halftones at 256 gradations.
GRADA- Settings PRINT/CANCEL
TION
Prints the gradation.
ALIGN- TOP
TRAY1
MENT
ADJUST
MENT
Settings
TRAY2
Settings
-8-0-7
When printing on media in Tray 1, specify
the size of the top margin.
-8-0-7
When printing on media in Tray 2, specify
the size of the top margin.
TRAY3
Settings
-8-0-7
When printing on media in Tray 3, specify
the size of the top margin.
TRAY4
Settings
-8-0-7
When printing on media in Tray 4, specify
the size of the top margin.
THICK
Settings
-8-0-7
When printing on thick paper, specify the
size of the top margin.
DUPLEX
Settings
-8-0-7
When printing on media using duplex
pass, specify the size of the top margin.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
75
LEFT
LEFT
ADJUST ADJ
MENT
TRAY1
Settings
LEFT
ADJ
TRAY2
Settings
LEFT
ADJ
TRAY3
Settings
LEFT
ADJ
TRAY4
Settings
-8-0-7
When printing on media in Tray 1, specify
the size of the left margin.
-8-0-7
When printing on media in Tray 2, specify
the size of the left margin.
-8-0-7
When printing on media in Tray 3, specify
the size of the left margin.
-8-0-7
When printing on media in Tray 4, specify
the size of the left margin.
Settings -8-0-7
LEFT
ADJ
When printing on media using duplex
DUPLEX pass, specify the size of the left margin.
LD
POWER
Settings
VIDEO
TIME
LAG
Settings
SUPPLIES
REPLACE
FUSER
UNIT
Settings
QUICK
SETTING
UPDATE
SETTING
Setup
EXECUTE/CANCEL
0-7
Adjust the intensity of laser output.
0-15
When resolution is set to 1200 dpi, adjust the video
output start point horizontally in the even lines.
YES/NO
Reset the service life counter for the
fuser unit.
Select whether or not to update the printer settings
from the definitions file on the USB memory device.
If EXECUTE is selected, the printer settings are
updated.
If CANCEL is selected, the settings are not updated.
BACKUP Setup
SETTING
EXECUTE/CANCEL
Select whether or not to save the printer settings
information on a USB memory device.
If EXECUTE is selected, the printer settings are
saved on a USB memory device.
If CANCEL is selected, the settings are not saved.
76
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
SERVICE MENU
With this menu, the service representative can adjust the printer and perform
maintenance operations. This menu cannot be used by the user.
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
77
78
Configuration Menu Overview
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Memory Direct
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be
printed by plugging the USB memory device into the printer.
"
"
Memory direct can be used only if an optional hard disk kit or a CompactFlash card is installed.
In order to perform collated printing with memory direct, an optional
hard disk kit or a CompactFlash card of 1 GB or more must be
installed.
For details on specifying settings with the control panel, refer to
“MEMORY DIRECT” on page 52.
Printing From a Connected USB Memory Device
1
2
3
80
Open the memory direct print
port cover.
Plug the USB memory device
into the memory direct print port.
The USB icon appears in the
upper-left corner of the message
window, and the Memory
Direct menu appears.
Select LIST OF FILES, and then press the Menu/Select key.
Memory Direct
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"
4
5
When all files (PDF, XPS, JPEG and TIFF) are displayed, select
Type OF FILES, and then press the Menu/Select key.
From the file list, select the file that you wish to print, and then press the
Menu/Select key.
If the file to be printed is in a folder, select the folder, and then press the
Menu/Select key.
"
"
A maximum of 99 folders and files can be displayed.
Up to 8 folder levels can be displayed.
Select PRINT, and then press the Menu/Select key.
When printing is finished, the status screen appears again.
"
"
Settings can be specified for the paper size, duplex printing, number of copies, collating, the output tray, and memory direct print.
Do not unplug the USB memory device from the memory direct
print port during memory direct printing.
Memory Direct
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
81
82
Memory Direct
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Using Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Media Specifications
Supported media types/sizes
The following table shows the information about the media types and sizes
supported by this printer.
For the information about custom size, see “Custom size” on page 85.
Media
Media Size
Inch
Tray*
Duplex
(double-sided)
Millimeter
Letter
8.5 x 11.0
215.9 x 279.4
1/2/3/4
Yes
Legal
8.5 x 14.0
215.9 x 355.6
1/2/3/4
Yes
Statement
5.5 x 8.5
139.7 x 215.9
1/2/3/4
Yes
Executive
7.25 x 10.5
184.2 x 267.0
1/2/3/4
Yes
A4
8.2 x 11.7
210.0 x 297.0
1/2/3/4
Yes
A5
5.9 x 8.3
148.0 x 210.0
1/2/3/4
Yes
A6
4.1 x 5.8
105.0 x 148.0
1/2/3/4
Yes
B5 (JIS)
7.2 x 10.1
182.0 x 257.0
1/2/3/4
Yes
B6
5.0 x 7.2
128.0 x 182.0
1/2/3/4
Yes
Folio
8.3 x 13.0
210.0 x 330.0
1/2/3/4
Yes
SP Folio
8.5 x 12.69
215.9 x 322.3
1/2/3/4
Yes
Foolscap
8.0 x 13.0
203.2 x 330.2
1/2/3/4
Yes
UK Quarto
8.0 x 10.0
203.2 x 254.0
1/2/3/4
Yes
Government Letter
8.0 x 10.5
203.2 x 266.7
1/2/3/4
Yes
Government Legal
8.5 x 13.0
215.9 x 330.2
1/2/3/4
Yes
16 K
7.7 x 10.6
195.0 x 270.0
1/2/3/4
Yes
Kai 16
7.3 x 10.2
185.0 x 260.0
1/2/3/4
Yes
Kai 32
5.1 x 7.3
130.0 x 185.0
1/2/3/4
Yes
Japanese Postcard
3.9 x 5.8
100.0 x 148.0
1/2/3/4
Yes**
Japanese Postcard-D
5.8 x 7.9
148.0 x 200.0
1/2/3/4
Yes**
B5 (ISO)
6.9 x 9.8
176.0 x 250.0
1/2/3/4
Yes
Envelope #10
4.125 x 9.5
104.8 x 241.3
1/2/3/4
No
Envelope DL
4.3 x 8.7
110.0 x 220.0
1/2/3/4
No
Envelope C5
6.4 x 9.0
162.0 x 229.0
1
No
Envelope C6
4.5 x 6.4
114.0 x 162.0
1/2/3/4
No
Envelope Monarch
3.875 x 7.5
98.4 x 190.5
1/2/3/4
No
Envelope Chou #3
4.7 x 9.2
120.0 x 235.0
1/2/3/4
No
Envelope Chou #4
3.5 x 8.1
90.0 x 205.0
1
No
Envelope You #4
4.1 x 9.3
105.0 x 235.0
1/2/3/4
No
Notes: *
**
Tray 3 and 4 are the optional lower feeder units.
Print quality is not guaranteed.
"
84
If PAPER MENU/PAPER SOURCE/TRAY1/2/3/4/SIZE SETTING is set to AUTO, the printer automatically detects the paper size
of Letter, Legal, Government Legal, Executive, A4, A5, and B5 (JIS).
Media Specifications
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Custom size
Tray 1
Tray 2/3/4
"
Simplex
Width: 76.2-215.9 mm (3.0 - 8.5 inch)
Duplex
Length: 127.0-900 mm (5.0 - 35.43 inch)
Width: 88.9-215.9 mm (3.5 - 8.5 inch)
Simplex
Duplex
Length: 139.7-355.6 mm (5.5 - 14.0 inch)
Width: 98.4-215.9 mm (3.87 - 8.5 inch)
Length: 148.0-355.6 mm (5.83 - 14.0 inch)
For custom size, you can use either the printer driver or printer's control panel to specify the settings within the range shown in the table on
previous page.
Media Types
Before purchasing a large quantity of special media, do a trial print
with the same media and check the print quality. For a list of approved media,
refer to printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Capacity
Tray 1
Up to 150 sheets, depending on the paper
weight.
Tray 2/3/4
Up to 550 sheets, depending on the paper
weight.
Orientation Tray 1
Face up
Tray 2/3/4
Face up
Driver
Plain Paper (Recycled)
Media Type
Weight
pagepro 5650EN: 68-105 g/m2 (18-28 lb bond)
Duplexing
pagepro 4650EN: 60-105 g/m2 (16-28 lb bond)
See page 84 for supported sizes.
Use media that is
Suitable for plain paper laser printers, such as standard or recycled office
paper.
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
85
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
„ Coated with a processed surface (such as carbon paper, and colored
paper that has been treated)
„ Carbon backed
„ Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
„ Cold-water-transfer paper
„ Pressure sensitive
„ Designed specifically for inkjet printers (such as superfine paper, glossy
paper, glossy film, and postcards)
„ Paper that has already been printed on
– Paper that has been printed on with an inkjet printer
– Paper that has been printed on with a monochrome/color laser printer/
copier
– Paper that has been printed on with a heat-transfer printer
– Paper that has been printed on with any other printer or fax machine
„ Dusty
„ Wet (or damp)
"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
„ Layered
„ Adhesive
„ Folded, creased, curled, embossed, warped, or wrinkled
„ Perforated, three-hole punched, or torn
„ Too slick, too coarse, or too textured
„ Different in texture (roughness) on the front and back
„ Too thin or too thick
„ Stuck together with static electricity
„ Composed of foil or gilt; too luminous
„ Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
„ Irregularly shaped (not rectangular or not cut at right angles)
86
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
„ Acidic
„ Any other media that is not approved
Thick Stock
Paper thicker than 106 g/m2 (28 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Tray 1
Tray 2/3/4
Up to 60 thick stock sheets, depending on
their thickness.
Up to 160 thick stock sheets, depending on
their thickness.
Orientation Face up
Driver
Thick 1 (106 - 159 g/m2 / 28-42 lb bond)
Media Type Thick 2 (160 - 216 g/m2 / 43-57 lb bond)
Thick 3* (106-216 g/m2 / 28-57 lb bond)
Weight
106–216 g/m2
Duplexing
"
"
Thick 1 and 2 are supported. See page 84 for supported
sizes.
Banner Paper
Length: 356 - 900 mm
Banner paper is not supported for printing at 1200 dpi.
Image quality of the area from 356 to 900 mm in length is not guaranteed.
* Thick 3 is supported by pagepro 5650EN only.
DO NOT use thick stock that is
„ Mixed with any other media in a tray (as this will cause printer misfeeding)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these layered regions may be lost or faded.
Capacity
Tray 1
Tray 2/3/4
Up to 15 envelopes, depending on their
thickness
Up to 80 envelopes, depending on their
thickness.
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
87
Orientation Face up
Driver
Envelope
Media Type
Duplexing Not supported
Use envelopes that are
„ Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„ Approved for laser printing
„ Dry
DO NOT use envelopes that have
„ Sticky flaps
„ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for sealing
„ Transparent windows
„ Too rough of a surface
„ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
„ Been presealed
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
„ The face sheet must follow the plain paper specification.
„ The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Capacity
Tray 1
Tray 2/3/4
88
Up to 100 label sheets, depending on their
thickness
Up to 290 label sheets, depending on their
thickness.
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Orientation Face up
Driver
Label
Media Type
Duplexing Not supported
Use label sheets that are
„ Recommended for laser printers
„ Letter or A4 size (adhesive label stock)
DO NOT use label sheets that
„ Have labels that easily peel off or have parts of the label already removed
„ Have backing sheets that have peeled away or have exposed adhesive
"
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
„ Are precut or perforated
OK to use
Do not use
Shiny backed paper
Full-page labels
(uncut)
Postcards
Try printing your data on a sheet of plain paper first to check placement.
Capacity
Tray 1
Tray 2/3/4
Up to 55 postcards, depending on their
thickness
Up to 200 postcards, depending on their
thickness.
Orientation Face up
Driver
Postcard
Media Type
Duplexing See page 84 for supported sizes.
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
89
Use postcards that are
„ Approved for laser printers
DO NOT use postcards that are
„ Coated
„ Designed for inkjet printers
„ Precut or perforated
„ Preprinted or multicolored
"
If the postcard is warped, press on the warped
area before putting it in the tray.
Thin Paper
Test all thin paper to ensure acceptable performance.
Capacity
Tray 1
Tray 2/3/4
Up to 150 sheets of thin paper, depending on
their thickness.
Up to 550 sheets of thin paper, depending on
their thickness.
Orientation Face up
Driver
Thin
Media Type
Weight
64-67 g/m2 (17-18 lb bond)
Duplexing See page 84 for supported sizes.
"
90
Thin paper is supported by pagepro 5650EN only.
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Transparencies
"
"
"
"
Do not fan transparencies before loading them. Resulting static electricity may cause printing errors.
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
Keep the printer path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 8, “Maintaining the Printer” .
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing environment.
Try printing your data on a sheet of plain paper first to check placement.
"
If you have problems feeding 100 sheets, try loading only 1–50 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, thus causing feeding problems.
Capacity
Tray 1
Tray 2/3/4
Up to 100 transparencies, depending on
their thickness
Up to 100 transparencies, depending on
their thickness.
Orientation Face up
Driver
Transparency
Media Type
Duplexing Not supported
"
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
„ Approved for laser printing
DO NOT use transparencies that
„ Have static electricity that will cause them to stick together
„ Are specified for inkjet printers only
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
91
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is
up to 4.2 mm (0.165") from the edges
of the media.
Each media size has a specific imageable area, the maximum area on which
the printer can print clearly and without
distortion.
a
a
a
Printable
Area
This area is subject to both hardware
a
limits (the physical media size and the
margins required by the printer) and
a = 4.2 mm (0.165")
software constraints (the amount of
memory available for the full-page frame buffer). The guaranteed imageable
(printable) area for all media sizes is the page size minus 4.2 mm (0.165")
from all edges of the media.
"
"
When printing on Banner Paper, the bottom margin is 10 mm (0.393").
Banner Paper
Length: 356 - 900 mm
Imageable Area—Envelopes
Envelopes have a nonguaranteed imageable area that varies with envelope
type.
"
The envelope
print orientation is determined
by your application.
Nonimageable area 4.2 mm (0.165")
Nonguaranteed area
Guaranteed
area
Page Margins
Margins are set through your application. Some applications allow you to set
custom page sizes and margins while others have only standard page sizes
and margins from which to choose. If you choose a standard format, you may
lose part of your image (due to imageable area constraints). If you can custom-size your page in your application, use those sizes given for the imageable area for optimum results.
92
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Loading Media
How do I load media?
Take off the top and bottom sheets of a
ream of paper. Holding a stack of approximately 100 sheets at a time, fan the
stack to prevent static buildup before
inserting it in a tray.
"
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Loading Media (Tray 1/2/3/4)
For details on the types and sizes of media that can be printed, refer to
“Media Specifications” on page 84.
Loading Plain Paper
1
Open the tray and place it on a
flat surface.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
93
2
3
4
5
94
Remove the lid of the tray.
If the media pressure plate is
raised, press down the media
pressure plate to lock it into
place.
Squeeze the media guide
(length) and slide it to the
desired size.
Squeeze the media guide
(width) and slide it to the desired
size.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
6
Load the paper face up in the
tray.
"
7
8
9
Do not load the paper above
the ↑ mark. For the information on the tray capacity for
each media, see “Media
Types” on page 85".
Reattach the lid of the tray.
Push the tray completely into the
printer.
Select PAPER MENU/PAPER SOURCE/TRAY X (Tray 1/2/3/
4)/PAPER SIZE and PAPER TYPE in the configuration menu, and
then select the setting for the size and type of media that is loaded. See
also “PAPER MENU” on page 36.
Other Media
When loading media other than plain paper, set the media mode (Envelope,
Label, Thick 1, Thick 2, Thick 3, Postcard, Thin paper, or Transparency) in
the driver for optimum print quality.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
95
Loading Envelopes
The following procedure is given taking Envelop #10 as an example.
"
1
Open Tray 1.
2
Remove the lid of the tray.
3
96
Load the envelope with its flap side down.
If the media pressure plate is
raised, press down the media
pressure plate to lock it into
place.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
4
Load the envelope with its flap to
the right.
"
"
5
6
Do not load the paper above
the ↑ mark. For the information on the tray capacity for
each media, see “Media
Types” on page 85".
For envelopes with the flap
along the short edge, load
the envelopes with the flap side down.
Squeeze the media guide
(length) and slide it to the
desired size.
Squeeze the media guide
(width) and slide it to the desired
size.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
97
7
8
9
98
Reattach the lid of the tray.
Push the tray completely into the
printer.
Select PAPER MENU/PAPER SOURCE/TRAY X (TRAY 1/2/3/
4)/PAPER SIZE and PAPER TYPE in the configuration menu, and
then select the setting for the size and type of the media that is loaded.
See also “PAPER MENU” on page 36.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Loading Label sheets/Postcards/Thick Stock/Thin paper/
Transparencies
"
"
1
2
3
Transparencies for full-color printing cannot be used. Using them may
lead to a printer malfunction.
Remove transparencies as soon as they are output to the center output tray to prevent them sticking together.
Open the tray and place it on a
flat surface.
Remove the lid of the tray.
If the media pressure plate is
raised, press down the media
pressure plate to lock it into
place.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
99
4
5
6
Squeeze the media guide
(length) and slide it to the
desired size.
Squeeze the media guide
(width) and slide it to the desired
size.
Load the paper face up in the
tray.
"
100
Do not load the paper
above the ↑ mark. For
the information on the
tray capacity for each
media, see “Media
Types” on page 85.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
7
8
9
Reattach the lid of the tray.
Push the tray completely into the
printer.
Select PAPER MENU/PAPER SOURCE/TRAY X (Tray 1/2/3/
4)/PAPER SIZE and PAPER TYPE in the configuration menu, and
then select the setting for the size and type of the media that is loaded.
See also “PAPER MENU” on page 36.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
101
Loading the Paper Larger than A4
1
2
3
Open the tray and place it on a
flat surface.
Remove the lid of the tray.
Slide the right and left lock tabs
in the tray outwards to unlock
them.
Plain paper
Envelope
102
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
4
5
6
Hold the grip of the tray and pull
its extendable part to the front
until it reaches the desired paper
size.
Squeeze the media guide
(length) and slide it to the
desired paper size.
Squeeze the media guide
(width) and slide it to the desired
paper size.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
103
7
Load the paper face up in the
tray.
"
8
9
10
104
Do not load the paper above
the ↑ mark. For the information on the tray capacity for
each media, see “Media
Types” on page 85.
Reattach the lid of the tray.
Push the tray completely into the
printer.
Select PAPER MENU/PAPER SOURCE/TRAY X (Tray 1/2/3/
4)/PAPER SIZE and PAPER TYPE in the configuration menu, and
then select the setting for the size and type of the media that is loaded.
See also “PAPER MENU” on page 36.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Loading Banner paper in the Tray 1
1
2
3
Open the tray and place it on a
flat surface.
Remove the lid of the tray.
Slide the right and left lock tabs
in the tray outwards to unlock
them.
Plain paper
Envelope
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
105
4
5
6
7
106
Hold the grip of the tray and pull
its extendable part to the front
until it reaches the end.
Squeeze the media guide
(length) and slide it to the
desired paper size.
Squeeze the media guide
(width) and slide it to the desired
paper size.
Load the banner paper face up
in the tray, and then roll up the
end of the paper so that it does
not fall off the tray.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
8
9
Push the tray completely into the
printer.
Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and
PAPER TYPE in the configuration menu, and then select the setting for
the size and type of the media that is loaded. See also “PAPER MENU”
on page 36.
Loading Media
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
107
Duplexing
Select paper with high opacity for duplex (double-sided) printing. Opacity
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Duplex (double-sided) printing can be done manually or can be done automatically with the duplex option installed and selected. For installing the
duplex, refer to “Installing the Duplex” on page 205.
Note
For details on supported media types for duplex printing, see “Media
Specifications” on page 84.
Duplexing envelopes, labels, thick paper3 or transparencies is not
supported.
"
Duplex printing can be performed with enough memory (no less than
256 MB) installed in the printer.
How do I autoduplex?
You should verify that the duplex is physically installed on the printer to successfully duplex (double-sided) the job.
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip
at the top.
11
If “Long Edge” is selected, the pages will be laid out to flip
at the side.
2
2
11
13
13
108
Duplexing
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is performed.
The following Order settings are available when “Booklet” is selected.
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
2
1
1
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
1
2
3
3
3
1
2
3
1
Load plain paper into the tray.
From the printer driver, specify duplex (double-sided) printing (Layout tab
in Windows).
Click OK.
"
With autoduplexing, the back side is printed first, and then the front
side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 500 sheets (A4/Letter) of 80 g/m2
(22 lb) paper.
"
"
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
Output Tray
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
109
Finishing
When the optional offset tray is installed, job separation and offset printing
can be performed. For the installation procedure, refer to “Offset Tray” on
page 214. Settings for job separation and offset printing can be specified by
selecting JOB SEPARATION or FINISHING in PAPER MENU.
"
Use the following paper for job separation and offset printing.
Media Size
Width: 89 to 216 mm (3.5 - 8.5 inch)
Length: 140 to 356 mm (5.5 - 14.0 inch)
"
Paper is fed to the sub output tray with job separation and offset printing.
Job Separation Printing
When paper is fed to the sub output tray, the pages are fed out shifted as
shown below.
To perform job separation printing, select SUB TRAY in PAPER
MENU/FINISHING .
2
1
4
3
2
1
3
2
1
"
110
Finishing
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Offset Printing
If offset printing is selected, the paper is fed out shifted as shown below.
When PAPER MENU/COLLATE is set to ON, the pages are fed out
in sets as shown below.
1
1
2
2
Finishing
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
3
3
2
3
2
1
3
2
1
3
2
1
- When COLLATE is set to OFF
1
- When COLLATE is set to ON
3
"
111
Media Storage
How do I store media?
„ Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
„ If media has been removed from its wrapper, place it in its original packaging and store in a cool, dark place on a level surface.
„ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust.
„ Avoid leaning media against other objects or placing it in an upright position.
Before using stored media, do a trial print to check print quality.
112
Media Storage
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Replacing
Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Replacing Consumables
Before replacing consumables, make sure that the power of the printer is
turned off.
Note
Failure to follow instructions as outlined in this manual could result in
voiding your warranty.
Note
If an error message (TONER OUT, FUSER UNIT END OF LIFE, etc.)
appears, print out the configuration page, and then check the status of the
consumables. For details on the error messages, refer to “Error Messages
(Warning:)” on page 182. For details on printing the configuration page,
refer to “Printing a Configuration Page” on page 150.
About toner cartridge
This printer uses a toner cartridge that includes the toner and the photosensitive drum. If the output image is light or blurred, the toner cartridge may be
defective or damaged. In that case, you need to replace it with a new one.
"
"
"
Handle the toner cartridge carefully to avoid spilling toner inside the
printer or on yourself.
Install only a new toner cartridge in your printer. If a used toner cartridge is installed, the indicator message will not clear and the supplies
status in the Status Monitor will not be updated.
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and a mild soap. If you get toner on your clothes, lightly
dust them off as best as you can. If some toner remains on your
clothes, use cool, not hot water, to rinse the toner off.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
114
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"
Refer to the following URL for recycling information.
US: printer.konicaminolta.net/products/recycle/index.asp
Europe: www.konicaminolta.eu/printing-solutions/more-information/
clean-planet.html
Other regions: printer.konicaminolta.com
Note
Do not use refilled toner cartridges or unapproved toner cartridges. Any
damage to the printer or quality problems caused by a refilled toner
cartridge or an unapproved toner cartridge will void your warranty. No
technical support is provided to recover from these problems.
When replacing a toner cartridge, refer to the following table. For optimum
print quality and performance, use only approved KONICA MINOLTA toner
cartridge for your specific printer type, as listed in the table below. You can
find your printer type and the toner cartridge part numbers on the consumables reorder label inside the front cover your printer.
Printer
Type
AM
EU
AP
"
Printer Parts
Number
Toner Cartridge Type
Toner Cartridge
Parts Number
A0DX 011
Standard-Capacity Toner Cartridge - Black (K)
A0FN 011
(pagepro
4650EN)
High-Capacity Toner Cartridge - Black (K)
A0FN 012
A0DX 012
Standard-Capacity Toner Cartridge - Black (K)
A0FP 011
(pagepro
5650EN)
High-Capacity Toner Cartridge - Black (K)
A0FP 012
A0DX 021
Standard-Capacity Toner Cartridge - Black (K)
A0FN 021
(pagepro
4650EN)
High-Capacity Toner Cartridge - Black (K)
A0FN 022
A0DX 022
Standard-Capacity Toner Cartridge - Black (K)
A0FP 021
(pagepro
5650EN)
High-Capacity Toner Cartridge - Black (K)
A0FP 022
A0DX 041
Standard-Capacity Toner Cartridge - Black (K)
A0FN 041
(pagepro
4650EN)
High-Capacity Toner Cartridge - Black (K)
A0FN 042
A0DX 042
Standard-Capacity Toner Cartridge - Black (K)
A0FP 041
(pagepro
5650EN)
High-Capacity Toner Cartridge - Black (K)
A0FP 042
For optimum print quality and performance, use only the corresponded TYPE genuine KONICA MINOLTA toner cartridge.
Keep toner cartridges:
„ In their packaging until you’re ready to install them.
„ In a cool, dry location away from sunlight (due to heat).
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
115
The maximum storage temperature is 35°C (95°F) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
„ Level during handling and storage.
Do not hold, stand or store a cartridge on its ends or turn it upside down;
the toner inside the cartridge may become caked or unequally distributed.
„ Away from salty air and corrosive gases such as aerosols.
116
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If TONER LOW on the SYS DEFAULT MENU/ENABLE WARNING is set
to ON, the message TONER LOW appears when the toner cartridge becomes
near empty. Follow the steps below to replace the toner cartridge.
"
1
2
3
If TONER LOW on the SYS DEFAULT MENU/ENABLE WARNING
is set to OFF, you are advised to replace the toner cartridge when the
message TONER OUT appears.
Open the top cover.
Hold the toner cartridge by the
grip, and then pull it out slowly.
Take the new toner cartridge out of the box.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
117
4
Holding it firmly with both hands,
rock the toner cartridge left and
right, forward and backward, to
distribute the toner evenly.
"
5
6
118
Do not touch the developing roller of the toner
cartridge; otherwise
image quality may
decrease.
Placing the toner cartridge on a
flat surface, pull out the seal horizontally.
Hold the toner cartridge by the
grip, and then insert it into the
slot inside the printer.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
7
Close the top cover securely.
Note
Dispose of the used toner cartridge according to your local regulations.
Do not burn the toner cartridge.
For details, refer to “About toner cartridge” on page 114.
Replacing the Fuser Unit
When it is time to replace the fuser unit, the message FUSER UNIT END
OF LIFE appears. Printing can continue even after this message appears;
however, since the print quality is reduced, the fuser unit should be replaced
immediately.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
119
1
Turn off the printer and disconnect the power cord.
"
2
Lift the lever shown in the figure.
3
Open the rear cover.
"
120
There are extremely hot
parts within the machine.
Before replacing the
fuser unit, wait about 30
minutes after turning off
the machine, and then
check that the fusing section has reached room
temperature; otherwise,
you may get burnt.
Do not touch any parts
inside the printer.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
4
5
Pull down the 2 levers at the bottom of the fuser unit.
Remove the fuser unit slowly.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
121
6
Prepare a new fuser unit.
"
7
122
Be careful not to touch
the surface of the fuser
roller.
Insert the new fuser unit slowly.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
8
9
10
Lift up the 2 levers at the bottom
of the fuser unit.
Push down the levers at both
ends of the fuser unit to lock it.
Close the rear cover.
"
11
Do not close the rear cover without installing the fuser unit. Forcibly closing the rear cover may damage the lever or the cover.
Reconnect the power cord, and
turn on the printer.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
123
12
124
Reset the counter in the MAINTENANCE MENU/SUPPLIES/
REPLACE/FUSER UNIT menu.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Replacing the Transfer Roller
for pagepro 4650EN
1
Open the top cover.
"
2
for pagepro 5650EN
Do not touch any parts
inside the printer.
Hold the toner cartridge by the
grip to pull it out slowly.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
125
3
4
5
Pull the 2 levers on the upper
part of the transfer roller, then
squeeze the 2 levers on the bottom of the transfer roller and pull
it out slowly towards you.
Pick up the new transfer roller by
the levers at both ends, and then
slot it in slowly.
Hold the toner cartridge by the
grip, and then insert it into the
slot inside the printer.
"
"
126
Do not touch any parts
inside the printer.
Ensure that the toner cartridge is firmly set.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
6
Close the top cover securely.
Replacing the Feed Roller
The feed roller is included as one of the regular replacement parts. There are
two feed rollers inside the machine and one in the tray. All feed rollers are
recommended to be replaced periodically.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
127
Replacing the Feed Roller (in the Tray)
128
1
Pull the tray out of the printer.
2
Remove the lid of the tray.
3
Remove any paper in the tray.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
4
5
6
While pushing down the shaft of
the feed roller, widen the tab of
the feed roller to loosen it (1)
and then slowly remove the feed
roller from the shaft on the tray
(2).
Hold the tab on the new feed
roller and slowly push it into the
shaft on the tray.
Aligning the small tabs on the
feed roller with the slots of the
shaft, push the feed roller completely in so that the tab fits into
the slot.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
129
7
Load the paper face up in the
tray.
"
8
9
130
Do not load the paper above
the ↑ mark. For the information on the tray capacity for
each media, see “Media
Types” on page 85.
Reattach the lid of the tray.
Push the tray completely into the
printer.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Replacing the Feed Roller (inside the Printer)
1
Open the top cover.
"
2
3
Do not touch any parts
inside the printer.
Hold the toner cartridge by the
grip, and then pull it out slowly.
While pushing down the shaft of
the feed roller, widen the tab of
the feed roller to loosen it (1)
and then slowly remove the feed
roller from the shaft on the tray
(2).
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
131
4
5
6
Hold the tab on the new feed
roller and slowly push it into the
shaft on the tray.
Aligning the small tabs on the
feed roller with the slots of the
shaft, push the feed roller completely in so that the tab fits into
the slot.
Hold the toner cartridge by the
grip, and then insert it into the
slot inside the printer.
"
132
Do not touch any parts
inside the printer.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
7
Close the top cover securely.
Replacing the Backup Battery
When the backup battery is at its end of life, the printer's date and time cannot
be retained. Follow the procedure described below to replace the backup battery.
Note
Only use the coin-shaped 3V lithium battery CR2032. It’s very important
to protect the printer controller board and any associated circuit boards
from electrostatic damage. Before performing this procedure, review
the antistatic caution on page 219. In addition, always handle circuit
boards by the edges only.
1
Turn off the printer and disconnect the power cord and interface cables.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
133
2
3
4
134
Using a screwdriver, loosen the
screw of the right cover, located
at the rear side.
Remove the right side cover.
Using a screwdriver, loosen the
two screws. (Do not remove
them from the printer.)
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
5
Remove the panel.
6
Remove the backup battery.
7
Insert a new backup battery.
"
"
8
9
When inserting the new
backup battery, be sure
that the + side faces
front.
Risk of explosion if battery is replaced by an
incorrect type.Dispose of
used batteries according
to your local regulations.
Do not burn the backup
battery.
Reinstall the panel and tighten the two screws.
Attach the right side cover.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
135
10
11
12
136
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Use DATE on the SYS DEFAULT MENU/CLOCK menu to set the date,
and use TIME on the SYS DEFAULT MENU/CLOCK menu to set the
time.
Replacing Consumables
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Maintaining the
Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Maintaining the Printer
CAUTION
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the printer’s covers and the interior of the printer body.
Handle the printer with care to preserve its life. Abuse handling may cause
damage and void your warranty. If dust and paper scraps remain on the
inside or outside of the printer, printer performance and print quality will suffer,
so the printer should be cleaned periodically. Keep the following guidelines in
mind.
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning. Do not spill water or detergent into the printer;
otherwise the printer will be damaged and an electric shock may occur.
CAUTION
The fuser unit is hot. When the rear cover is opened, the fuser
unit temperature drops gradually (one hour wait time).
„ Be careful when cleaning the inside of the printer or removing media misfeeds, as the fuser unit and other internal parts may be very hot.
„ Do not place anything on top of the printer.
„ Use a soft cloth to clean the printer.
„ Never spray cleaning solutions directly on the printer’s surface; the spray
could penetrate through the air vents of the printer and damage the internal circuits.
„ Avoid using abrasive or corrosive solutions or solutions that contain solvents (such as alcohol and benzene) to clean the printer.
„ Always test any cleaning solution (such as mild detergent) on a small
inconspicuous area of your printer to check the solution’s performance.
„ Never use sharp or rough implements, such as wire or plastic cleaning
pads.
„ Always close the printer’s covers gently. Never subject the printer to vibration.
„ Do not cover the printer immediately after using it. Turn it off and wait until
it cools down.
138
Maintaining the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
„ Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
„ Do not open the printer during printing.
„ Do not tap media stacks on the printer.
„ Do not lubricate or disassemble the printer.
„ Do not tilt the printer.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so
may damage the printer and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
„ Make sure two people are available to lift the printer when moving it.
Keep the printer level to avoid
toner spillage.
„ When lifting up the printer, push
the tray 1/2 completely into the
printer and then lift the printer as
shown in the right figure.
"
If an optional lower feeder
unit is installed, remove it
before lifting the printer.
„ If you get toner on your skin, wash it off with cool water and a mild soap.
Maintaining the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
139
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you
plug in the printer.
Cleaning the Printer
CAUTION
Be sure to turn off the printer and unplug the power cord before
cleaning.
Exterior
Control Panel
Ventilation Grill
Printer Exterior
140
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Cleaning the Feed Roller (inside the Tray)
The accumulation of paper dust and other debris on the media rollers can
cause media-feeding problems.
1
2
3
Pull the tray out of the printer
While pushing down the shaft of
the feed roller, widen the tab of
the feed roller to loosen it (1)
and then slowly remove the feed
roller from the shaft on the tray
(2).
Clean the feed rollers by wiping
them with a soft, dry cloth.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
141
4
5
6
142
Hold the tab on the feed roller
and slowly push it into the shaft
on the tray.
Aligning the small tabs on the
feed roller with the slots of the
shaft, push the feed roller completely in so that the tab fits into
the slot.
Push the tray completely into the
printer.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Cleaning the Feed Roller (inside the Printer)
1
Open the top cover.
"
2
3
Do not touch any parts
inside the printer.
Hold the toner cartridge by the
grip, and then pull it out slowly.
Clean the feed rollers by wiping
them with a soft, dry cloth.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
143
4
Hold the toner cartridge by the
grip, and then insert it into the
slot inside the printer.
"
"
5
144
Do not touch any parts
inside the printer.
Ensure that the toner cartridge is firmly set.
Close the top cover securely.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Cleaning the Duplex Feed Rollers
1
2
3
Lift the lever at the top left hand
side of the duplex to unlock it
and open the duplex cover.
Clean the media feed roller by
wiping them with a soft, dry
cloth.
Close the duplex cover.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
145
Cleaning the Offset Tray Feed Rollers
1
2
3
146
Pull the tab at the top left of the
offset tray cover to open it.
Clean the media feed roller by
wiping them with a soft, dry
cloth.
Close the offset tray cover.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Cleaning the Laser Lens
1
2
3
Open the top cover.
Hold the toner cartridge by the
grip, and then pull it out slowly.
Clean the laser lens by wiping
them with a soft, dry cloth.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
147
4
Hold the toner cartridge by the
grip, and then insert it into the
slot inside the printer.
"
"
5
148
Do not touch any parts
inside the printer.
Ensure that the toner cartridge is firmly set.
Close the top cover securely.
Cleaning the Printer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Troubleshooting
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Introduction
This chapter provides information to aid you in resolving printer problems you
may encounter, or at least guide you to the proper sources for help.
Printing the configuration page
Page 150
Preventing media misfeeds
Page 151
Understanding the media path
Page 152
Clearing media misfeeds
Page 153
Solving problems with media misfeeds
Page 169
Solving other problems
Page 171
Solving problems with printing quality
Page 176
Status, error, and service messages
Page 181
Printing a Configuration Page
Print a configuration page to verify the printer is printing correctly, or to check
the printer configuration.
Press Key
(once)
Until Display Reads
READY
PRINT MENU
If an optional hard disk kit is installed, the PROOF/PRINT
MENU appears at the top of the menu. Press the
select the PRINT MENU.
key to
CONFIGRATION PG
PRINT
The configuration page prints and the printer goes back
to READY.
150
Introduction
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Preventing Media Misfeeds
Make sure that...
Media matches the printer specifications.
Media is flat, especially on the leading edge.
The printer is on a hard, flat, level surface.
You store media in a dry location away from moisture and humidity.
You remove transparencies from the output tray immediately after printing to
avoid static buildup.
You always adjust the media guides in the tray after inserting the media (a
guide not properly adjusted can cause poor print quality, media misfeeds, and
printer damage).
You load the media printing-side up in the tray (Some manufacturers place an
arrow on the end of the wrapper to indicate the printing side).
Avoid...
Media that is folded, wrinkled, or excessively curled.
Double feeding (remove the media and fan the sheets—they may be sticking
together).
Fanning transparencies since this causes static.
Loading more than one type/size/weight of media in a tray at the same time.
Overfilling the trays.
Allowing the output tray to overfill (the output tray has a 500-sheet capacity—
misfeeding may occur if you allow more than 500 sheets of media to accumulate at one time).
Allowing the output tray to fill with more than a few transparencies.
Preventing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
151
Understanding the Media Path
Understanding the printer’s media path will help you locate media misfeeds.
10
13
9
12
8
11
1
7
2
3
4
5
6
152
1
Toner cartridge
8
Fuser unit
2
Laser
9
Main output tray
3
Tray 1
10 Sub output tray
4
Tray 2
11 Duplex (optional)
5
Tray 3 (optional)
12 Face up tray (pagepro 5650EN: standard,
pagepro 4650EN: optional)
6
Tray 4 (optional)
13 Offset tray (optional)
7
Transfer roller
Understanding the Media Path
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any
piece of media left in the printer, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the printer.
CAUTION
Unfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the control panel
window persists, open and close the printer’s covers. This should clear the
misfeed message.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
153
Media Misfeed Messages and Clearing Procedures
154
Media Misfeed Message
Page Reference
PAPER JAM
TRAY1/2/3/4
Refer to “Clearing a Media Misfeed at
the Paper Tray” on page 155.
PAPER JAM
DUPLEX1/2
Refer to “Clearing a Media Misfeed at
the Duplex” on page 158.
PAPER JAM
FUSER/EXIT
Refer to “Clearing a Media Misfeed at
the Fuser Unit” on page 160.
PAPER JAM
TRANSFER
Refer to “Clearing a Media Misfeed at
the Transfer Roller” on page 163.
PAPER JAM
SUB EXIT
Refer to “Clearing a Media Misfeed at
the Offset Tray” on page 166.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Clearing a Media Misfeed at the Paper Tray
1
2
3
Pull the tray out of the printer.
Remove the lid, and remove any
wrinkled media from the tray.
Remove any misfed media.
"
4
If any media is jammed at
the optional lower feeder
unit (tray 3/4), examine
the interior of the tray.
Remove all media from the tray.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
155
5
Fan the media, and align its
edges.
"
6
Load the media in the tray.
7
Reattach the lid of the tray.
8
156
Do not fan transparencies.
Push the tray completely into the
printer.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
9
Open and close the top cover of
the printer.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
157
Clearing a Media Misfeed at the Duplex
"
PAPER JAM DUPLEX1 appearing in the display indicates a paper
jam occurs at the paper exit.
PAPER JAM DUPLEX2 appearing in the display indicates a paper
jam occurs at the paper exit or the interior of the top cover of the
duplex.
At the paper exit
1
Examine the center output tray
and remove any misfed media.
"
"
If media is torn, check for
any remaining media.
If the paper is difficult to
remove, proceed to the
following section "At the
interior of the duplex
cover" to examine the
interior of the duplex
cover and remove the
media.
At the interior of the duplex cover
1
158
Lift the lever at the top left hand
side of the duplex to unlock it
and open the duplex cover.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
2
Examine the interior of the
duplex cover and remove any
misfed media.
"
3
If media is torn, check for
any remaining media.
Close the duplex cover.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
159
Clearing a Media Misfeed at the Fuser Unit
1
Remove any media from the
center output tray.
"
2
3
Lift the second lever from the top
left corner of the back of the
printer.
Open the rear cover.
"
160
If the duplex is installed,
open the cover of the
duplex first. Refer to
“Clearing a Media Misfeed at the Duplex” on
page 158.
Do not touch any parts
inside the printer.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
4
Open the cover of the fuser unit
and remove any misfed media.
"
"
If media is torn, check for
any remaining media.
Make sure that the levers
at both ends of the fuser
unit are returned to the
positions they were in
before clearing the jam.
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers may result in
burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
161
5
Close the rear cover.
"
162
Make sure that the levers
at the rear of the printer
are returned to the positions they were in before
clearing the jam.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Clearing a Media Misfeed at the Transfer Roller
1
2
Remove any media from the
center output tray.
Open the top cover.
"
3
Do not touch any parts
inside the printer.
Hold the toner cartridge by the
grip, and then pull it out slowly.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
163
4
Examine the interior after taking
out the toner cartridge and
remove any misfed media.
"
"
5
"
164
If media is torn, check for
any remaining media.
Hold the toner cartridge by the
grip, and then insert it into the
slot inside the printer.
"
6
Rotating the roller on the
left side helps releasing
misfed media for
removal.
Do not touch any parts
inside the printer.
Ensure that the toner cartridge is firmly set.
Close the top cover securely.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Note
Do not touch the surface of the
transfer roller. Doing so may
cause the print quality to
deteriorate.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
165
Clearing a Media Misfeed at the Offset Tray
1
166
Open the offset tray cover by
pulling the tab at the top left of
the cover.
2
Remove any misfed media.
3
Close the offset tray cover.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
4
5
Lift the second lever from the top
left corner of the back of the
printer.
Open the rear cover.
"
6
Do not touch any parts
inside the printer.
Remove any misfed media.
"
If media is torn, check for
any remaining media.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
167
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers may result in
burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
7
Close the rear cover.
"
168
Make sure that the levers
at the rear of the printer
are returned to the positions they were in before
clearing the jam.
Clearing Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Solving Problems with Media Misfeeds
"
Frequent misfeeds in any area indicate that area should be checked,
repaired, or cleaned. Repeated misfeeds may also happen if you’re
using unsupported print media.
Symptom
Cause
Solution
Several
sheets go
through the
printer
together.
The front edges of
the media are not
even.
Remove the media and even up the
front edges, then reload it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Too much static elec- Do not fan transparencies.
tricity is present.
Media misfeed message stays
on.
Top cover needs to
Open and close the top cover of the
printer again.
be opened and
closed again to reset
the printer.
Some media remains Recheck the media path and make
misfed in the printer. sure that you have removed all of the
misfed media.
Duplex misfeeds.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 84.
Only plain paper, 60-105 g/m2 / 16-28
lb bond (pagepro 4650EN) or 68-105
g/m2 / 18-28 lb bond (pagepro
5650EN) can be autoduplexed. See
“Media Specifications” on page 84.
Make sure that you have not mixed
media types in a paper tray.
Do not duplex (double-sided) envelopes, labels, thick stock, or transparencies.
Media is still being
misfed.
Recheck the media path inside the
duplex option and make sure that you
have removed all of the misfed media.
Solving Problems with Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
169
Symptom
Cause
Solution
Media is
misfeeding.
The media is not cor- Remove the misfed media and reposirectly positioned in
tion the media properly in the tray.
the tray.
The number of sheets Remove the excess media and reload
in the tray exceeds
the correct number of sheets in the
the maximum
tray.
allowed.
The media guides are Adjust the media guides in the tray to
not correctly adjusted match the size of the media.
to the media size.
Warped or wrinkled
Remove the media, smooth it out, and
media is loaded in the reload it. If it still misfeeds, do not use
tray.
that media.
The media is moist
from humidity.
Media is
misfeeding.
170
Remove the moist media and replace it
with new, dry media.
Transparencies have Remove the transparencies and load
collected static elec- them in the tray one sheet at a time.
tricity in the tray.
Do not fan transparencies before loading them.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media.
The media roller is
dirty.
Clean the media supply roller.
See “Media Specifications” on page
84.
For more details, refer to “Cleaning the
Feed Roller (inside the Tray)” on page
141.
Solving Problems with Media Misfeeds
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Solving Other Problems
"
For details on consumables, access www.q-shop.com.
Symptom
Cause
Solution
Printer
The power cord is not Turn off the printer, confirm that the
power is not correctly plugged into power cord is correctly plugged into the
on.
the outlet.
outlet, and then turn on the printer.
Something is wrong Plug another electrical appliance into
with the outlet conthe outlet and see whether it operates
nected to the printer. properly.
The power switch is
not correctly turned
on (I position).
Turn the power switch off (O position),
then turn it back to the on (I position).
The printer is conUse a power source with the specificanected to an outlet
tions listed in appendix A, “Technical
with a voltage or fre- Specifications.”
quency that does not
match the printer
specifications.
Data was
sent to the
printer, but it
doesn’t print.
An error message is Handle according to the message disdisplayed in the mes- played.
sage window.
A job may be cancelled if user authentication or account
track settings are
specified.
Click the User Authentication/Account
Track button in the printer driver, and
then type in the necessary information
before printing.
The control
panel displays
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
it for damage. If it is damaged, replace
it.
TONER
LOW much
You printed with
heavy toner coverage.
See the specifications in Appendix A.
sooner than
expected.
Solving Other Problems
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
171
Symptom
Cause
You can’t
The tray is empty.
print the configuration
The printer’s covers
page.
aren’t closed
securely.
There is a media
misfeed.
Solution
Check that at least Tray 1 is loaded
with media, in place, and secure.
Make sure the covers are closed
securely. Close all covers gently to
avoid jarring the printer. Make sure that
the toner cartridge is installed correctly
when closing the center output tray.
Clear the media misfeed.
Printing from The file format (file
Only files with the format (extension)
a USB mem- extension) is not one for JPEG, TIFF, XPS, or PDF are supory device is that can be printed.
ported.
not possible.
MEMORY DIRECT Change the setting for INTERFACE
for the printer is set to MENU/MEMORY DIRECT to
DISABLE.
ENABLE.
Printing
takes too
much time.
A public user is not
specified for user
authentication.
Contact the printer administrator.
The printer is set to a
slow printing mode
(for example, thick
stock or transparency).
It takes more time to print on special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The printer is set to
It takes time for printing to start in
Energy Saver mode. Energy Saver mode. If you do not want
to use this mode, disable it. (SYS
DEFAULT MENU/ENERGY SAVER
menu)
The job is very complex.
Wait. No action needed.
The printer memory is Add more memory.
insufficient.
A toner cartridge for a Install a correct KONICA MINOLTA
different region or an toner cartridge approved for your speunapproved genuine cific printer.
toner cartridge is
installed.
172
Solving Other Problems
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Symptom
Cause
Solution
Blank pages
come out
during printing.
The toner cartridge
may be defective or
empty.
Check the toner cartridge. The image
will not print if it is empty.
The wrong media is
being used.
Check that the media type set in the
driver matches the media loaded in the
printer.
Not all pages The printer has the
print.
wrong kind of cable,
or the printer is not
configured for the
correct cable and
port.
Check your cable.
The Cancel key was
pressed.
Make sure no one pressed the Cancel
key while your job was printing.
The tray is empty.
Check that the trays are loaded with
media, in place, and secure.
A document is printed Print the overlay file using a suitable
with an overlay file
driver.
which has been created by an unsuitable driver.
Printer
resets or
turns off frequently.
The power cord is not Turn off the printer, confirm that the
correctly plugged into power cord is correctly plugged into the
the outlet.
outlet, and then turn on the printer.
A system error
occurred.
Contact Technical Support with the
error information.
Solving Other Problems
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
173
Symptom
Cause
You are
Media or settings are
experiencnot correct.
ing duplex
(doublesided) problems.
Solution
For autoduplexing, make sure that you
have a duplex option installed.
Make sure that you are using correct
media.
„ See “Media Specifications” on page
84.
„ Do not duplex (double-sided) envelopes, labels, postcards, thick paper
3, or transparencies.
„ Make sure that you have not mixed
media types in a paper tray.
Make sure that your document has
more than one page.
Make sure the duplex option is installed
and declared in the Windows printer
driver (Properties/Configure tab).
In the Windows printer driver (Layout/
Double-Sided), choose “Double-Sided.”
For N-up on duplexed pages, choose
Collate only in the Windows driver’s
Paper Tab. Do not set collation in the
application.
174
With N-up on Both the driver and
multiple cop- the application have
ies, the out- been set for collation.
put is
incorrect.
For N-up on multiple copies, choose
Collate only in the Windows driver’s
Paper Tab. Do not set collation in the
application.
You hear
unusual
noises.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
The tray is not
installed correctly.
Remove the tray that you are printing
from and reinsert it completely into the
printer.
There is a foreign
object stuck inside
the printer.
Turn off the printer and remove the
object. If you cannot remove it, contact
Technical Support.
Solving Other Problems
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Symptom
Cause
Solution
The
web-based
utility cannot
be accessed.
The PageScope Web
Connection Administrator’s password is
incorrect.
The PageScope Web Connection
Administrator password has a 6-character minimum and a 16-character
maximum. For details of the PageScope Web Connection administrator
password, refer to the Reference Guide
on the Utilities and Documentation
CD-ROM.
Media is
wrinkled.
The media is moist
Remove the moist media and replace it
from humidity or hav- with new, dry media.
ing water spilled on it.
The transfer roller or Check them for damage. If necessary,
fuser unit is defective. contact Technical Support with the
error information.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 84.
Replace the backup battery. For
The date and The backup battery
has reached the end details, see “Replacing the Backup Battime is not
tery” on page 133.
correctly
of its life.
maintained
on the
printer.
The pages
that were fed
out were not
uniformly
loaded.
There are large curls Remove the paper from the paper tray,
in the paper.
turn it over, and then load it again.
There are gaps
between the media
guides of the paper
tray and the sides of
the paper.
Slide the media guides of the paper
tray against the sides of the paper so
that there are no gaps.
Solving Other Problems
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
175
Solving Problems with Printing Quality
Symptom
Cause
Solution
Nothing is
printed, or
there are
blank spots
on the
printed page.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
The media is moist
from humidity.
Adjust the humidity for media storage.
Remove the moist media and replace it
with new, dry media.
The media set in the
printer driver mismatches the media
loaded in the printer.
Load the correct media in the printer.
The power source
Use a power source with the proper
does not match the
specifications.
printer specifications.
Several sheets are
Remove the media from the tray and
being fed at the same check it for static electricity. Fan plain
time.
paper or other media (but not transparencies), and replace it in the tray.
Media is not set prop- Remove the media, tap it to straighten
erly in the tray(s).
it out, return it to the tray, and realign
the media guides.
Entire sheet The toner cartridge
is printed
may be defective or
damaged.
black.
176
Remove the toner cartridge and check
for damage. If damaged, replace it.
Solving Problems with Printing Quality
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Symptom
Cause
Solution
Image is too
light; there is
low image
density.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
There is not much
toner left in the cartridge.
Replace the toner cartridge.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
The media type is set When printing envelopes, labels, postincorrectly.
cards, thick stock, or transparencies,
specify the appropriate media type in
the printer driver.
Image is too The toner cartridge
dark.
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
Image is
blurred;
background
is lightly
stained.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
The print
density is
uneven.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
Solving Problems with Printing Quality
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
177
Symptom
Cause
Solution
Irregular
The media is moist
print or mot- from humidity.
tled image
appears.
178
Adjust the humidity in the media storage area.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 84.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
There is
insufficient
fusing or the
image
comes off
when
rubbed.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 84.
Media type is set
incorrectly.
When printing envelopes, labels, postcards, thick stock or transparencies,
specify the appropriate media type in
the printer driver.
There are
toner
smudges or
residual
images.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
Solving Problems with Printing Quality
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Symptom
Cause
Solution
There are
toner
smudges on
the back side
of the page
(whether or
not it has
been
duplexed).
The media path is
dirty with toner.
Print several blank sheets and the
excess toner should disappear.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
Abnormal
The toner cartridge
areas (white, may be defective or
black)
damaged.
appear in a
regular pattern.
Remove the toner cartridge and check
for damage. If damaged, replace it.
Image
defects.
The toner cartridge
may be leaking.
Remove the toner cartridge and check
it for damage. If it is damaged, replace
it.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
Solving Problems with Printing Quality
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
179
Symptom
Cause
Solution
Lateral lines
or bands
appear on
image.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
The media path is
dirty with toner.
Print several sheets and the excess
toner should disappear.
The toner cartridge
may be defective or
damaged.
Remove the toner cartridge and check
for damage. If damaged, replace it.
If the problem is not resolved, even after all of the above have been performed, contact Technical Support with the error information.
For contact information, refer to the Need Assistance Sheet.
180
Solving Problems with Printing Quality
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel message window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.
Standard Status Messages
This message...
means...
do this...
CANCELLING JOB
The job is being cancelled.
No action needed.
COPYING
The printer is printing with
the collating function.
ENERGY SAVER
The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power within 30 seconds.
FIRMWARE UPDATE
The firmware is being
updated.
INITIALIZING
The printer is being initialized.
OFFLINE
The printer is offline.
To print on a
network, change
the TELNET
setting so it is
online.
PRINTING
The printer is printing.
No action needed.
PROCESSING
The printer is processing
data.
READY
The printer is on and ready
to receive data.
REBOOTING
The printer is being
restarted.
WARMING UP
The printer is warming up.
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
181
Error Messages (Warning:
)
This message...
means...
DEVICE
NOT SUPPORTED
An incompatible
Use a device compatible
device is connected with the USB port of this
to the USB port of this printer.
printer.
do this...
FUSER UNIT
END OF LIFE
The fuser unit has
Contact Technical Supreached the end of its port with the error inforlife.
mation.
HDD
NEAR FULL
The hard disk is
nearly full.
HUBS
NOT SUPPORTED
An incompatible USB Use a USB hub
hub is connected to
compatible with the USB
port of this printer.
the USB port of this
printer.
INCORRECT
HDD
Since the hard disk
was formatted with a
different machine, the
hard disk could not be
used.
Delete print jobs saved
on the hard disk.
Replace the hard disk
with one compatible with
this machine, or select
HDD FORMAT from
SYS DEFAULT MENU
and format the hard
disk.
INCORRECT
MEMORY CARD
Since the
CompactFlash card
was formatted with a
different machine, the
CompactFlash card
could not be used.
Replace the
CompactFlash card with
one compatible with this
machine, or select
CARD FORMAT from
SYS DEFAULT MENU
and format the
CompactFlash card.
182
MEMORY CARD
NEAR FULL
The CompactFlash
card is nearly full.
Delete resources (fonts,
forms, etc.) which saved
on the CompactFlash
card by using Download
Manager or PSWC.
NON SUPPORT
CARD
Since incompatible
CompactFlash card
was inserted into the
memory slot, the
CompactFlash could
not be used.
Use CompactFlash card
compatible with this
printer.
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
This message...
means...
do this...
PAPER EMPTY
TRAY X
Tray X (Tray 1, 2, 3 or Load media into the
specified tray.
4) is empty.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/PAPER
EMPTY/TRAY X is
set to ON.)
Tray X (Tray 1, 2, 3 or Correctly install the
specified tray.
4) is not correctly
installed.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/PAPER
EMPTY/TRAY X is
set to ON.)
PAPER LOW X
The tray X (Tray 2, 3
or 4) paper is low.
Load the media into the
tray.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/
PAPER LOW/TRAY
X is set to ON.)
TONER OUT
The toner cartridge is Replace the toner carempty.
tridge.
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
183
This message...
means...
do this...
TONER LOW
The toner cartridge is Prepare the specified
low and should be
toner cartridge.
replaced within 500
pages at 5% coverage of letter/A4
pages.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/TONER LOW is
set to ON.)
UNABLE TO
COLLATE JOB
184
The hard disk is full. Print one copy of the file
Print jobs over 10,000 at a time.
pages cannot be collated.
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Error Messages (Operator Call:
)
This message...
means...
do this...
CHECK LEVER
FACE UP TRAY
IS SELECTED
The face up lever is
raised when duplex
printing or sub tray
output is specified.
Pull the face up lever
down.
COVER OPEN
DUPLEX COVER
The duplex cover is
open.
Close the duplex cover.
COVER OPEN
FINISHER COVER
The offset tray cover
is open.
Close the offset tray
cover.
COVER OPEN
REAR COVER
The printer's rear
cover is open.
Close the rear cover.
COVER OPEN
TOP COVER
The printer's top
cover is open.
Close the top cover.
HOLD JOB ERROR
UNABLE TO
STORE JOB
The specified print job
saved on the hard
disk is sent while the
hard disk is not
installed.
Print jobs can be saved
only if a hard disk is
installed. If desired,
install a hard disk.
HOLD JOB ERROR
“OPTIONAL”
PRESS CANCEL
When printing a
Change the printer constored job, the printer figuration to that when
configuration was
the job was stored.
changed since the job
was stored.
INCORRECT TRAY
The installed option
Turn off the power of the
tray is an unapprinter, and then remove
proved type. (pagepro the tray.
5650EN only)
MEMORY FULL
PRESS CANCEL
The printer has
received more data
than can be processed with its internal memory.
Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed (for
example, by decreasing
the resolution), and then
try printing again.
If that doesn’t solve the
problem, install an
optional memory module.
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
185
This message...
means...
do this...
OUTPUT FULL
REMOVE PAPER
YYYY
The output tray is full Remove all media from
of media.
the output tray.
PAPER EMPTY
“SIZE”
“MEDIA”
The specified tray is
empty. (Appears
when PAPER
Load the correct media
into the specified tray.
MENU/PAPER
SOURCE/TRAY
CHAINING ON is
set.)
PAPER ERROR
“SIZE”
“MEDIA”
The media size/type Load the correct media
size and type.
set in the printer
driver is different from
the size/type of media
loaded (Appears
when PAPER
MENU/PAPER
SOURCE/TRAY
CHAINING ON is
set.)
186
PAPER JAM
DUPLEX1
Media has misfed in
the duplex option.
PAPER JAM
DUPLEX2
Media has misfed in
the duplex option.
PAPER JAM
FUSER/EXIT
Media has misfed
leaving the fuser
area.
PAPER JAM
SUB EXIT
Media has misfed in
the feed section of the
sub output tray.
PAPER JAM
TRAYX
Media has misfed
while being pulled
from the specified tray
(Tray 1, 2, 3, or 4).
PAPER JAM
TRANSFER
Media has misfed in
the transfer section.
TONER OUT
REPLACE TONER
The toner cartridge is Replace the toner carcompletely empty.
tridge.
Press the
key to display the help screen.
Follow the instructions in
the help screen to
remove the misfed
media.
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
This message...
means...
do this...
TONER MISSING
CHECK TONER
The toner cartridge is Install a correct KONICA
not installed, or an
MINOLTA toner carunapproved toner
tridge.
cartridge is installed.
TRAY X EMPTY
“SIZE”
“MEDIA”
The X (Tray 1, 2, 3 or Load the correct media
4) was specified with into the specified tray.
the printer driver for
printing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF.
TRAYX PAPER ERR
“SIZE”
“MEDIA”
The media size/type Load the correct media
size and type.
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF.
TRAYX SIZE ERR
ADD
“SIZE”
The media size set in Load the correct media
the printer driver is
size into the specified
different from the size tray.
of media loaded.
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
187
Service Messages:
These messages indicate a more serious error that can only be corrected by
a customer service engineer. If one of these messages appears, turn the
printer off, then turn it on again. If the problem persists, contact your local
vendor or authorized service provider.
This service
message...
means...
SERVICE CALL XXXX An error has been
detected with the item
“Error”
indicated “XXXX” in the
service message.
do this...
Reboot the printer. This
often clears the service
message, and printer
operation can resume.
Information about errors If the problem persists,
appears at the bottom of contact Technical Supthe message window.
port.
188
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Installing
Accessories
10
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Introduction
Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
"
This chapter provides information about the following accessories.
Option name
Explanation
Dual In-Line Memory 256 MB: 9J05 151
Unit (DIMM)
128 MB: 9J05 152
Duplex
Auto duplexing
Lower Feeder Unit
(Tray 3/4)
550-sheet tray included
Hard disk kit
40 GB Hard Disk
CompactFlash card
256 MB, 512 MB, 1 GB, 2GB, 4 GB
CF Adapter
Adapter for CompactFlash card.
Offset tray
Performs job separation and offset printing.
Face up tray
(5650: Standard)
Paper is ejected with its print side up.
"
For details on the available options, refer to printer.konicaminolta.com.
Note
The hard disk kit and a CF adapter cannot be installed to be used at the
same time.
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation..
190
Introduction
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Antistatic Protection
Note
It’s very important to protect the printer controller board from
electrostatic damage while performing any task involving the controller
board.
Turn off all power switches first. If an antistatic wrist strap is provided in
your printer option kit, attach one end of it to your wrist and the other
end to the bare metal chassis on the back of your printer. Never attach
the wrist strap to any piece of equipment with an electrical current
present. Plastic, rubber, wood, painted metal surfaces, and telephones
are not acceptable grounding points.
If you don’t have an antistatic wrist strap, discharge your body’s static
electric charge by touching a grounded surface before you handle any
printer boards or components. Also avoid walking around after
grounding yourself.
Antistatic Protection
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
191
Dual In-Line Memory Module (DIMM)
"
"
You may need additional memory (DIMM) for complex graphics and
for duplex (double-sided) printing.
This printer detects only half of the amount of the installed memory.
Dual in-line memory module (or DIMM) is compact circuit board with surface-mount memory chips.
There is 256 MB of onboard memory and one available memory expansion
slot. The memory can be expanded to a maximum of 384 MB (128 MB + 256
MB).
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 191. In addition,
always handle circuit boards by the edges only.
1
192
Turn off the printer and disconnect the power cord and interface cables.
Dual In-Line Memory Module (DIMM)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
2
3
4
Using a screwdriver, loosen the
screw of the right cover, located
at the rear side.
Remove the right side cover.
Using a screwdriver, loosen the
two screws. (Do not remove
them from the printer.)
Dual In-Line Memory Module (DIMM)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
193
5
6
Remove the panel.
Insert the DIMM at an angle
(about 45°) into the connector,
making sure that the notch on
the unit aligns with the tab on
connector, and then press down
carefully until it clicks into place.
"
"
7
8
9
10
194
Be sure to handle the
DIMM by the edges only.
You will hear a click when
the DIMM is properly
placed.
Reinstall the panel and tighten
the two screws.
Attach the right side cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Dual In-Line Memory Module (DIMM)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
11
12
Declare the additional Printer Memory in the Windows printer driver
(Properties/Configure tab).
Print a configuration page (PRINT MENU/CONFIGURATION PG) and
verify that the total amount of the RAM installed in your printer is listed.
Dual In-Line Memory Module (DIMM)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
195
Hard Disk Kit
If you install a hard disk kit, the followings can be performed:
–
–
–
–
–
"
Collate printing
Job printing/saving
Fonts/forms download
User Authentication/Account Track
Direct printing
A hard disk kit and a CF adapter cannot be installed simultaneously.
Installing the Hard Disk kit
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 191. In addition,
always handle circuit boards by the edges only.
1
196
Turn off the printer and disconnect the power cord and interface cables.
Hard Disk Kit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
2
3
4
Using a screwdriver, loosen the
screw of the right cover, located
at the rear side.
Remove the right side cover.
Using a screwdriver, loosen the
two screws. (Do not remove
them from the printer.)
Hard Disk Kit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
197
5
6
7
8
9
198
Remove the panel.
Plug the cable on the hard disk
kit into the connector on the controller board.
Mount the hard disk kit onto the
controller board as shown in the
figure, and then tighten the two
screws.
Reinstall the panel and tighten the two screws.
Attach the right side cover.
Hard Disk Kit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
10
11
12
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Declare the Hard Disk in the Windows printer driver (Properties/Configure
tab).
Hard Disk Kit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
199
CompactFlash
If you install a CF Adapter and CompactFlash card, the followings can be performed:
–
–
–
–
"
"
"
Collate printing
Fonts/forms download
Authentication/Account Track
Direct printing (including the use of PageScope Direct Print)
Only CompactFlash cards with a capacity of 256 MB, 512 MB, 1 GB, 2
GB or 4 GB can be used.
The job printing/saving function is not available with a CompactFlash
card. This function requires that an optional hard disk kit be installed.
A hard disk kit and a CF adapter cannot be installed simultaneously.
Installing the CompactFlash card
Note
If a CompactFlash card has been used for a device other than this
printer, the card is automatically formatted and all of its data is cleared
when installed onto the printer controller board.
Note
It is very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 191. In addition,
always handle circuit boards by their edges only.
200
CompactFlash
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
1
2
3
Turn off the printer and disconnect the power cord and interface cables.
Using a screwdriver, loosen the
screw of the right cover, located
at the rear side.
Remove the right side cover.
CompactFlash
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
201
4
5
6
202
Using a screwdriver, loosen the
two screws. (Do not remove
them from the printer.)
Remove the panel.
Plug the cable on the CF
Adapter into the connector on
the controller board.
CompactFlash
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
7
8
Mount the CF Adapter onto the
controller board as shown in the
figure, and then secure the
screws.
Fully insert the CompactFlash
card into the appropriate slot.
When the CompactFlash card is
correctly inserted, the button on
the side of the slot (circled in the
illustration) slightly pops out.
"
9
10
11
12
Before removing the CompactFlash card, press this
button.
Reinstall the panel and tighten the two screws.
Attach the right side cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
CompactFlash
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
203
13
204
Declare the Memory card in the Windows printer driver (Properties/Configure tab).
CompactFlash
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Duplex
Duplex (double-sided) printing can be performed automatically with the
duplex and enough memory installed. For details, refer to “Duplexing” on
page 108.
For pagepro 5650EN
For pagepro 4650EN
Installing the Duplex
1
Turn off the printer and disconnect the power cord and interface cables.
205
Duplex
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
2
3
4
Pushing the two tabs as shown
in the figure, remove the rear
cover of the printer.
Remove the connector cover of
the printer as shown in the figure.
Insert the right and left tabs at
the bottom of the duplex into the
holes at the back of the printer,
and then align the top of the
duplex with the printer.
"
Ensure that the connector of the duplex is connected to the connector
of the printer.
206
Duplex
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
5
6
7
8
Tighten the two screws at the
both ends of the bottom of the
duplex.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Declare the Duplex in the Windows printer driver (Properties/Configure
tab).
207
Duplex
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Lower Feeder Unit
You can install up to two optional lower feeder units (Trays 3 and 4). Each
lower feeder unit increases your printer’s media feed capacity by A4/550
sheets.
Kit Contents
„ Lower feeder unit with a tray (A4/550-sheet capacity)
„ Fasteners (x 4)
208
Lower Feeder Unit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Installing the Lower Feeder Unit
Note
Since consumables are installed in the printer, be sure to keep the
printer level when moving it in order to prevent accidental spills.
1
2
3
Turn off the printer and disconnect the power cord and interface cables.
Place the feeder unit to be installed at the lower level on a flat location.
"
If you install only one lower feeder unit, proceed to Step 6.
Lift up the feeder unit to be
installed at the higher level by
holding the parts as shown in the
figure.
Lower Feeder Unit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
209
4
5
210
Align the front and back corners
of the top and bottom feeder
units, and slowly lower the top
unit so that the guide pins at the
4 corners of the bottom unit fit
into the holes of the base plate
of the top unit.
Securely insert the fasteners into
the 2 locations inside the top
feeder unit and 2 locations at the
back of the feeder units.
Lower Feeder Unit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
6
7
8
Pull out the trays.
Lift up the printer by holding the
recessed areas at both sides of
the printer as shown in the figure.
With another person's help,
place the printer on top of the
lower feeder unit, making sure
that the positioning pins on the
lower feeder unit correctly fit into
the holes on the bottom of the
printer.
"
The printer must be lowered gently. Otherwise,
the interior parts may be
damaged.
Lower Feeder Unit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
211
WARNING!
This printer weighs approximately 23 kg (50.8 lbs) when it is fully loaded
with consumables. The printer must be lifted by two people.
9
212
Insert the fasteners into the 2
locations inside and 2 locations
at the back of the printer.
Lower Feeder Unit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
10
11
12
13
Push the trays completely into
the printer.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Declare Paper Source Unit 3/4 in the Windows printer driver (Properties/
Configure tab).
Lower Feeder Unit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
213
Offset Tray
When the offset tray is installed, job separation and offset printing can be performed.
Installing the Offset Tray
1
214
Turn off the printer and disconnect the power cord and interface cables.
Offset Tray
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
2
3
Loosen the right and left thumbscrews as shown in the figure to
remove the top cover of the
paper exit.
Insert the right and left tabs of
the offset tray into the holes at
the top of the printer and slowly
put the offset tray down to the
top of the printer.
Offset Tray
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
215
4
5
Tighten the two screws at both
ends of the bottom of the offset
tray.
Draw the extension tray (1).
"
6
7
8
216
When printing a thick
paper, you can flip the
stopper as shown in the
figure below (2).
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Declare Offset Tray in the Windows printer driver (Properties/Configure
tab).
Offset Tray
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Installing the Face Up Tray
1
2
Insert the right and left tabs of
the face up tray into the holes at
the back of the printer.
Raise the lever as shown in the
figure and draw the extension
tray.
Offset Tray
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
217
218
Offset Tray
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Appendix
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Safety Specifications
Printer
Safety standards
EMC standards
U.S. model
UL 60950-1, CSA C22.2 No.
60950-1-03
European model
EU Directive 73/23/EEC
EU Directive 93/68/EEC
EN 60950-1 (IEC 60950)
China model
GB 4943
U.S. model
FCC part 15 subpart B class B
ICES-003
European model
EU Directive 89/336/EEC
EU Directive 93/68/EEC
EN 55022 (CISPR Pub. 22) class B
EN 61000-3-2
EN 61000-3-3
China model
GB 9254 class B, GB 17625.1
Australian model
EN 55022 class B
Technical Specifications
Printer
220
Type
Desktop A4 laser beam printer
Print system
Semiconductor laser beam scanning system
Exposure system
Laser diode and polygon mirror scanning
Developing system
Electro photographic System
(roller charging, single component magnetic
toner development)
Resolution
600 dpi × 600 dpi × 1 bit
1200 dpi × 1200 dpi × 1 bit
Safety Specifications
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
First print output time
pagepro
4650EN
Simplex
10.2 seconds or less for
A4/Letter plain paper
Duplex
14.2 seconds for A4 plain
paper
14.0 seconds for Letter
plain paper
pagepro
5650EN
Simplex
9.4 seconds for A4/Letter
plain paper
Duplex
12.7 seconds for A4 plain
paper
12.6 seconds for Letter
plain paper
Print speed
(unit: ppm (Page Per
Minute))
pagepro
4650EN
pagepro
5650EN
Simplex
34 ppm for A4 plain paper
35.7 ppm for Letter plain
paper
Duplex
20.9 ppm for A4 plain paper
21.5 ppm for Letter plain
paper
Simplex
43 ppm for A4 plain paper
45.1 ppm for Letter plain
paper
Duplex
26.4 ppm for A4 plain paper
27.2 ppm for Letter plain
paper
Technical Specifications
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
221
Media sizes
• Letter
• Legal
• Statement
• Executive
• A4
• A5
• A6
• B5 (JIS)
• B6
• Folio
• SP Folio
• Foolscap
• UK Quarto
• Government Letter
• Government Legal
• 16K
• Kai 16
• Kai 32
• Japanese Postcard
• Japanese Postcard-D
• B5 (ISO)
• Envelope #10
• Envelope DL
• Envelope C5
• Envelope C6
• Envelope Chou #3
• Envelope Monarch
• Envelope Chou #4
• Envelope You #4
• Custom size
Tray 1
Width: 76.2-215.9 (3.87 - 8.5 inch)
Length: 127.0-900 (5.83 - 35.43 inch)
Tray 2/3/4
Width: 98.4-215.9 (3.0 - 8.5 inch)
Length: 148.0-355.6 (5.0 - 14.0 inch)
222
Technical Specifications
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Paper/Media
• Plain paper
pagepro 5650EN: 68-105 g/m2 (18-28 lb bond)
pagepro 4650EN: 60-105 g/m2 (16-28 lb bond)
• Recycled
pagepro 5650EN: 68-105 g/m2 (18-28 lb bond)
pagepro 4650EN: 60-105 g/m2 (16-28 lb bond)
•
•
•
•
•
•
Transparencies
Envelopes
Label
Thick 1 (106-159 g/m2 / 28-42 lb bond)
Thick 2 (160-216 g/m2 / 43-57 lb bond)
Thick 3 (106-216 g/m2 / 28-57 lb bond, pagepro
5650EN only)
• Postcard
• Thin paper (64-67 g/m2 / 17- 18 lb bond, pagepro
5650EN only)
Paper supply
Tray 1
Plain/Recycled paper: 150 sheets
Transparency: 100 sheets
Envelope: 15 sheets
Labels: 100 sheets
Thick paper: 60 sheets
Postcard: 55 sheets
Thin paper: 150 sheets
Banner paper: 1 sheet
Tray 2/3/ Plain/Recycled paper: 550 sheets
4
Transparency: 100 sheets
Envelope: 80 sheets
Labels: 290 sheets
Thick paper: 160 sheets
Postcard: 200 sheets
Thin paper: 550 sheets
Output tray capacity
Standard configura- Main output tray: 500 sheets
tion
(Plain paper: 80 g/m2 / 22 lb)
Face up tray: 70 sheets (Plain
paper: 80 g/m2 / 22 lb)
Optional offset tray
installed
Sub output tray: 500 sheets
(Plain paper: 80 g/m2 / 22 lb)
Operating temperature
10 to 35°C (50 to 95°F)
Operating humidity
15 to 85%
Technical Specifications
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
223
Power supply
120 V, 50 to 60 Hz
220 to 240 V, 50 to 60 Hz
Power consumption
pagepro 4650EN
110 V: 1015W or less
220 V: 1015W or less
Energy saving mode:
110 V: 15W or less
230 V: 19W or less
pagepro 5650EN
110 V: 1240W or less
220 V: 1300W or less
Energy saving mode:
120 V: 15W or less
230 V: 19W or less
pagepro 4650EN
120 V: 9.8 A or less
220 - 240 V: 5.2 A or less
pagepro 5650EN
120 V: 12.5 A or less
220 - 240 V: 6 A or less
pagepro 4650EN
Printing: 53.6 dB or less
Standby: 27 dB or less
pagepro 5650EN
Printing: 56.1 dB or less
Standby: 28 dB or less
Amperage
Acoustic Noise
External dimensions (Stan- Height: 404.3 mm (15.9")
dard configuration)
Width: 421.8 mm (16.6")
Depth: 465.4 mm (18.3")
Weight
Printer:
approximately 21 kg (46.4. lb) (without comsumables)
approximately 23 kg (50.8 lb) (with comsumables)
Interface
USB 2.0 (High Speed) compliant, 10Base-T/
100Base-TX/1000Base-T Ethernet, Parallel, Host
USB (USB device printing)
Standard memory
128 MB
224
Technical Specifications
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Consumable Life Expectancy Chart
Item
Average Life Expectancy
Toner cartridge
Standard in-box Cartridge:
About 6,000 sheets (Continuous)
Replacement Cartridge (Standard-Capacity):
About 10,000 sheets (Continuous)
Replacement Cartridge (High-Capacity):
About 17,000 sheets (Continuous)
Media feed roller
About 200,000 sheets (Continuous)
Transfer roller
Fuser unit
"
The values shown for the toner cartridge indicate the number of pages
for simplex printing using A4/Letter-size media with 5% coverage.
The actual life may differ (be shorter) depending on the printing conditions (coverage, paper size, etc.), differences in the printing method,
such as continuous printing or intermittent printing (when print jobs of
one page are often printed), or the type of paper used, for example,
thick paper. In addition, the life will be affected by the temperature and
humidity of the operating environment.
Technical Specifications
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
225
Our Concern for Environmental Protection
As an ENERGY STAR® Partner, we have determined that this machine meets
the ENERGY STAR Guidelines for energy efficiency.
What is an ENERGY STAR product?
An ENERGY STAR product has a special feature that allows it to automatically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.
226
Our Concern for Environmental Protection
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Index
A
D
Accessories
CompactFlash 200
DIMMs 192
Hard disk Kit 196
Lower feeder unit 208
Antistatic protection 191
Dual in-line memory module 192
Duplexing 108
C
CompactFlash 200
Configuration menu 30
Feed roller 127
Fuser unit 119
Toner cartridge 117
Transfer roller 125
Consumables
Backup battery 133
Control panel 26
E
Electrostatic discharge 191
Envelopes 87
Error messages 182
F
Finishing 110
H
Hard disk Kit 196
I
Imageable area 92
227
Index
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
L
Labels 88
Loading media 93
Lower feeder unit 208
M
Maintenance 138
Media
Clearing misfeeds 153
Imageable area 92
Loading 93
Path 152
Preventing misfeeds 151
Media misfeed
Duplex 158
Offset Tray 166
Paper Tray 155
Transfer roller 163
Media path 152
Media storage 112
Media type
Envelopes 87
Labels 88
Plain paper 85
Postcards 89
Thick stock 87
Thin paper 90
Transparencies 91
Memory Direct 80
Message window 28
Messages 181
Misfeed problems 169
Clearing 153
Media path 152
Preventing 151
Printer
Parts 4
Printer driver (Postscript, PCL) 16
Advanced tab 17
Basic tab 17
Cover page tab 18
Displaying 15
Layout tab 18
Other tab 20
Quality tab 19
Uninstalling 14
Watermark/Overlay tab 19
S
Service messages 188
Status monitor 22
Opening 22
Using 22
T
Thick stock 87
Thin paper 90
Transparencies 91
Troubleshooting 149
O
Output tray 109
P
Plain paper 85
Postcards 89
Preventing media misfeeds 151
Print quality 176
228
Index
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement