Product Overview

Product Overview
LOUDSPEAKER MANAGEMENT SYSTEM
Product Overview
The [r]evolution is here! The all new DriveRack® PA2 provides all the processing you need between your mixer and amplifiers
to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms,
a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android,® iOS,® Mac,® or
Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and
affordable loudspeaker management processors, for a whole new generation.
Features
< New Setup Wizard For Easy System Configuration
< Stereo 8-Band Output Parametric EQs
For Speaker Tunings
< Security Lockout
< Stereo PeakPlus® Output Limiters
< 48 kHz Processing
< Stereo Output Driver Alignment Delays For
2-Way & 3-Way Systems
< dbx Type IV™ Conversion Prevents
Clipping Of The A/D Converters
< Full-Time RTA
< Easy-To-Read LCD Display
< White/Pink Noise Generator
< 25 Factory Presets/75 User Presets
< Subharmonic Synthesizer
< Front-Panel XLR RTA Mic Input
With 15V Phantom Power
< Various Speaker & Amplifier
Tunings Included
< dbx® Compression
< Support For Mono Or Stereo Inputs
< Pre-Crossover Delay For Aligning
The Sound System To The Stage Backline
< Support For Mono Or Stereo Subwoofers�
< Free dbx Mobile Software Control Application
for System Configuration and Control
< Crossover With Support For Full Range,
2-Way, & 3-Way Configurations
< Front-Panel Output Mute Buttons
< New Level Assist For System Level Balancing
< New AutoEQ™ For Fast & Accurate Room
Equalization Using 8-Band Parametric EQ
< AFS™ For Ringing Out The System &
On-The-Fly Feedback Suppression
< 31-Band Graphic EQ For Fine-Tuning
The System’s Frequency Response To Taste
< 24-Bit A/D & D/A Converters
< Bright, 6-Segment Input & Output Meters
Who uses this product:
BANDS
DJs
< Downloadable Tunings & Presets Using The
dbx Mobile Software Control Application
SOUND
INSTALLATION
dbx Professional Products • 10653 South River Front Parkway • South Jordan, Utah 84095
801.566-8800
•
[email protected] • www.dbxpro.com
LOUDSPEAKER MANAGEMENT SYSTEM
120V
50/60Hz
Specifications
ANALOG INPUTS:
Number of Inputs: Connectors: Type: Impedance: Max input line level: CMRR: RTA Mic Phantom Voltage: D/A PERFORMANCE:
(2) Line inputs. (1) RTA Mic input
(2) Female XLR line inputs,
(1) female XLR RTA mic input
Electronically balanced/RF filtered
> 50 kΩ
+20 dBu
> 45 dB
+15 VDC
ANALOG OUTPUTS:
Number of Outputs: Connectors: Type: Impedance: Max Output Level: CMRR: Alignment Delay: (6) Line outputs
Male XLR
Electronically balanced/RF filtered
120 Ω
+20 dBu
> 45 dB
10ms per channel (60ms total)
Dynamic Range: Sample Rate: 112 dB A-weighted, 110 dB unweighted
48 kHz
SYSTE M PE R FO R MAN C E:
Dynamic Range: THD+N: Frequency Response: Interchannel Crosstalk: Crosstalk input to output: 110 dB A-weighted, 107 dB unweighted
0.003% typical at +4 dBu, 1 kHz, 0 dB input gain
20 Hz – 20 kHz, +/- 0.5 dB
< -110 dB, -120 dB typical
< -100 dB
P O W E R S U P P LY :
Operating Voltage: Power Requirements: 100-120 VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz,
22 Watts
PHYSICAL:
Weight: Dimensions: 5.25 lbs. (2.4 kg) Shipping weight 6.75 lbs. (3.1 kg)
1.75” (4.4cm) H x 5.75”(14.6cm) D x 19” (48.26cm) W
A/D PERFORMANCE:
Type: dbx Type IV conversion system
Dynamic Range: 112 dB A-weighted, 110 dB unweighted
Type IV dynamic range: 123 dB with transient material, A-weighted, 22 kHz BW
121 dB with transient material, unweighted, 22 kHz
BW
115 dB typical with program material, A-weighted,
22 kHz BW
Sample Rate: 48 kHz
dbx Professional Products • 10653 South River Front Parkway • South Jordan, Utah 84095
801.566-8800
•
[email protected] • www.dbxpro.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement