Catalogue Sheet: ES Series

Catalogue Sheet: ES Series
Project/Location:
Contractor:
ES Series
Date:
All Metal Pictogram Sign
Prepared by:
FEATURES
TYPICAL SPECIFICATIONS
• Metal construction using Canadian cold-rolled steel
• Based on a modular design, this product comes pre-assembled
for quick, easy installation
• Long-life white LED light source
• Meets or exceeds CSA 22.2 No.141-10 standard for pictogram
exit signs
• Two-wire universal AC input: 120 to 347VAC; two-wire standard
DC input: 6 to 24VDC
• Energy efficient – consumes less than 2.5W in AC mode and only
1W in DC-remote
• Self-Powered model delivers standard two hours of back-up
lighting
• Universal mounting – end, wall or ceiling
Supply and install the Emergi-Lite® ES Series pictogram Exit Signs.
The equipment shall operate with universal 2-wire AC input voltage of
120 to 347VAC at less than 2.5W and universal 2-wire DC input voltage
from 6 to 24VDC at 1W consumption for single and double face signs.
The sign shall be suitable for wall, end, or ceiling mount. The frame
and back plate shall each be of one-piece steel construction. The
faceplate(s) shall be constructed of robust clear polycarbonate panels
with an opaque border coloured factory-white. The light source shall
be white light-emitting diodes (LED) and shall provide even illumination in normal and emergency operation. The pictogram Exit Sign in a
Self-Powered configuration shall use a sealed Nickel-Cadmium battery
of 2.4V nominal voltage and shall stay illuminated during emergency
operation for at least two hours upon AC failure.
The Exit Sign shall be listed CSA 22.2 No.141-10.
The equipment shall be Emergi-Lite® Model:
• Easy access to wiring entry for all mounting options
• Canopy mounting system designed specifically for ease of
installation
.
WIRE GUARDS
460.0079-E
Wall mount
460.0027-E
End mount
460.0028-E
Ceiling mount
POWER CONSUMPTION
DIMENSIONS
Dimensions are approximate and subject to change.
< PICTOGRAM
LEFT FROM HERE
MODEL
PICTOGRAM
STRAIGHT FROM HERE
PICTOGRAM >
RIGHT FROM HERE
87/8” [22.4 cm]
75/8” [19.2 cm]
73/8” [18.7 cm]
45/8” [11.7 cm]
121/8” [30.7 cm]
133/8” [33.9 cm]
AC SPECS
DC SPECS
AC-only
120 to
347VAC
Less than
2.5W
-
-
AC/DC
standard
120 to
347VAC
Less than
2.5W
6 to 24VDC
Less than
1W
AC/Special DC
120 to
347VAC
Less than
2.5W
36, 48, 120VDC
Less than
2.5W
Two-wire 120V
AC/DC
120VAC
Less than
2.5W
120VDC
Less than
2.5W
Self-Powered
120 to
347VAC
Less than
2.5W
Nickel-Cadmium
Min. 2 hours
battery
21/8” [5.3 cm]
ORDERING INFORMATION
SERIES
ES= steel pictogram Exit Sign
FACES / MOUNTING
1= single face
universal mounting
2= double face
universal mounting
3= universal face,
universal mounting
COLOUR
VOLTAGE
U= 120 to 347VAC; 6 to 24VDC
I= s elf-powered, 120 to 347VAC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2-wires 120VAC/VDC
B= black
G= grey
W= factory white
OPTIONS
TP= tamper-proof screws*
VR= vandal resistant shield and
tamper-proof screws*
* Option VR not available on universal
face.
Other colours available.
EXAMPLE: ES1UWVR
44
* 990.0119-E= t amper-proof bit
(sold separately)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement