POE004 QG A1
5 Port with 4 Port PoE
Fast Ethernet Switch
Quick Installation Guide
FCC Warning
Package Contents
Front Panel (LEDs)
This device has been tested and found to
comply with limits for a Class A digital device
and pursuant to Part 15 of FCC Rules. These
limits are designed to provide a reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates and
radiates radio frequency energy. If it’s not
installed and used in accordance with the
user’s manual, it may cause interference. In
which case, users will be required to correct
interference at their own expenses.
Before you start to install this switch, please
verify your package that contains the following
items:
LED Indicator of 5-port PoE switch




One 5-port Switch with 4 PSE
One Quick Installation Guide
One Power Adapter
One Power Cord
LED
Power
Status
On
Off
LINK/ACT On
Off
Blinking
PoE
On
Off
CE Warning
Description
Power is on.
Power is off.
Port is for connection.
No connection.
Data is transmitting or
receiving
Port is linked to Power
Device
No Power Device is
connected
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 5 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic is
on the network and the number of users
increases continuously.
It consists of 4 PSE/PoE ports. That can solve
the limitation of the power outlet location and
offer the system designer a flexible solution to
locate the network device everywhere.
The palm size was specifically designed for
small to medium workgroups. It can be
installed where space is limited; moreover, it
provides smooth network migration and easy
upgrade to network capacity.
Connections
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features











5 Port 10/100M Nway (Auto-negotiation)
Switch
4 PSE/PoE function ports
IEEE 802.3 af/at
Supporting the power Max. 30 W for each
PSE/PoE port, total power is 70W
Palm with metal case with external power
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking full wire speed forwarding
Auto-MDI/MDI-X function for any port
Switch/Hub to this 5 Port with 4 Port PoE
Fast Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is simple
and friendly to up-link to another switch without
crossover cable.
Technical Specifications
Standards
Features
IEEE 802.3af/at
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control
Number of Ports:
5 10/100BaseT(X) with 4
PSE Ports
MAC Address: 1K
Buffer Memory: 384K bits
Transmission Method:
Store and Forward
Transmission
Media
Cat. 5/5e/6 UTP/STP
LED
Indicators
Per Port: Link/Act,
PoE Act/Status
Per Unit: Power
Power
Output/Input
Power
Consumption
Dimensions
Weight
Operating
Temperature
Storage
Temperature
Humidity
Certifications
48V/DC Input/Output
70 Watts (Max)
130 × 97 × 24 mm
(L x W x H)
1.3 kg
0 to 40℃
-20 to 90℃
10 to 90% RH
(non-condensing)
FCC Class A, CE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement