Synergy Global Technology LCD1U17 15, LCD1U19 07 rack console User manual

Toll Free: 1-888-865-6888
Tel: 510-226-8368 Fax: 510-226-8968
Email: [email protected]
User Manual
17” / 19” LCD
LCD1U17-15 / LCD1U19-07
1U LCD Console Drawer
Options :
- AV / DVI-D / HDMI / Audio
- Full Range KVM
- DC power
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.rackmountmart.com
Contents
< Part. 1 > LCD1U17-15 / LCD1U19-07
1.1
1.2
1.3
1.4
Package Content
Structure Diagram & Dimension
Installation
Connection
P.1
P.1 - 2
P.3 - 4
P.5
< Part. 2 > Specifications / OSD
2.1
2.2
2.3
Product Specifications
Keyboard / Mouse Specifications
On-screen Display Operation ( OSD )
P.6 - 7
P.8
P.9 - 10
< Part. 3 > Options
3.1
3.2
HDMI, DVI-D, S-Video + BNC & Audio
48V, 24V or 12VDC power
P.11
P.12
www.rackmountmart.com
Contents
< Part. 4 > KVM Integration
8-port
16-port
32-port
1
-
-MUIP163IP
-MUIP323IP
1
2
-
-MUIP164IP
-MUIP324IP2
1
1
0
-
-MU162
-MU322
1
2
0
-
-MU163
-MU323
1
3
0
-
-MU164
-MU324
Local
Remote
16-port
32-port
1
0
1
-U8KVM2IP
-U16KVM2IP
-U32KVM2IP
1
1
0
-U8KVM2
-U16KVM2
-U32KVM2
1
0
0
-U8KVM
-U16KVM
-U32KVM
Local
Remote
8-port
16-port
32-port
1
1
1
-M83IP
-M163IP
-
1
1
2
-M84IP2
-M164IP2
-
1
1
0
-M82
-M162
-
1
2
0
-M83
-M163
-
1
3
0
-M84
-M164
-
Local
Remote
8-port
16-port
1
0
1
-8KVM2IP
-16KVM2IP
-
1
1
0
-8KVM2
-16KVM2
-
1
0
0
-8KVM-u
-16KVM-u
-
DVI-D
KVM
Local
Remote
12-port
-
-
1
0
-12DVI
-
-
PS/2
DB-15 KVM
Local
Remote
8-port
-
-
1
0
-8KVM
-
-
Matrix
Cat6 KVM
Combo
Cat6 KVM
Matrix
DB-15 KVM
Combo
DB-15 KVM
Local
Remote
1
1
1
8-port
0
0
32-port
www.rackmountmart.com
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
www.rackmountmart.com
< Part 1 >
< 1.1 > Package Content
LCD1U17-15 or LCD1U19-07 unit X 1
- LCD-A3001 6ft Combo KVM cable X 1
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models.
It varies with options such as KVM, HDMI, DVI-D, AV, audio & DC power.
< 1.2 > Structure Diagram
1
6
2
7
8
9
3
4
5
1
Carry handle to release the 2-pt lock
6
LCD interchangeable module kit
2
2-point lock
7
Micro switch for screen auto power off
3
Installation Slides
8
Keyboard interchangeable module kit
4
LCD membrane
9
Mouse interchangeable module kit
5
Membrane switch (KVM option)
P.1
www.rackmountmart.com
< 1.2 > Dimension
Front View
UNIT : mm
Side View
1mm = 0.03937 inch
Top View
Model
Product Dimension
(W x D x H)
Net
Weight
LCD1U17-15
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73"
12 kg
26 lb
LCD1U19-07
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73"
13 kg
29 lb
The weight is only for the single console models. It varies with accessories & options
such as KVM, HDMI, DVI-D, AV, audio & DC power.
P.2
www.rackmountmart.com
< 1.3 > Installation - How to install Installation Slides
Step
■
Insert the left and right rear mounting brackets into
the LCD console drawer.
Step
■
■
1
2
Measure the depth of the front and rear mounting rails.
Align each rear mounting bracket to a suitable length.
Step
3
Complete the installation
■
Fix the LCD console drawer into the rack.
M6 screw, cage nut & cup washer x 8 are provided.
P.3
www.rackmountmart.com
< 1.3 > Installation- How to use the drawer
P.4
■
Pull the tab on the front handle and gently
slide out the drawer.
■
Flip up the LCD to a suitable angle.
■
Operate the LCD console drawer.
www.rackmountmart.com
< 1.4 > Connection to
PS/2 or USB Server
LCD console drawer
LCD console drawer
KVM
KVM
LCD-A3001 Combo
KVM cable
LCD-A3001 Combo
KVM cable
PS/2 server
USB server
< 1.4 > Connection to external KVM
LCD console drawer
LCD console drawer
KVM
KVM
LCD-A3001 Combo
KVM cable
LCD-A3001 Combo
KVM cable
PS/2 console KVM
USB console KVM
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
P.5
www.rackmountmart.com
< Part 2 >
< 2.1 > Product Specifications
LCD
Panel
17
Manufacturer
Panel Size ( diagonal )
17-inch TFT color LCD
19-inch TFT color LCD
1280 x 1024
1280 x 1024
250
250
Contrast Ratio ( typ. )
1000:1
1000:1
Color
16.7 M
16.7 M
80/80/80/80
80/80/80/80
5
5
0.264
0.294
337.92H x 270.33V
376.32H x 301.05V
Display pixel ( dots x lines )
Brightness ( typ. )
Viewing Angle ( L/R/U/D )
Response Time ( ms )
Dot pitch ( mm )
Display Area ( mm )
Surface treatment
Haze 25%, Hard-coating
Surface hardness
Video
Connectivity
3H
3H
Backlight Type
CCFL
CCFL
MTBF ( hrs )
50,000
50,000
Digital
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS single link
VGA
Analog 0.7Vp-p
Composite ( BNC )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio Input
Connector
3.5mm stereo jack
Impedance / Power level
30kΩ / 750mV
Connector
3.5mm stereo jack
Resistance / Power level
30kΩ / 2.8V
Power
2 x 2W
Analog
Audio
Connectivity
19
Audio Output
Speaker Output
*When the audio output is connected, speaker output is OFF
Power
Regulatory
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON
25W or less
Power saving mode
4W or less
Power button OFF
1W or less
Safety Approval
cUL, FCC & CE
P.6
www.rackmountmart.com
Environmental
Conditions
Operating
Storage
Temperature
0 to 50°C degree
Humidity
20~90%, non-condensing
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Physical
Specification
17
Product ( W x D x H )
Net Weight
Applicable
Format
VGA Input
19
441.6 x 500 x 44 mm
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73 inch
17.4 x 19.7 x 1.73 inch
12 kgs / 26 lbs
13 kgs / 29 lbs
PC Signal
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P.7
www.rackmountmart.com
< 2.2 > Keyboard / Mouse Specifications
Ge
Gb
G keyboard integrated with touchpad
G keyboard integrated with trackball
Key force
55 ± 5g
Travelling distance
3 ± 0.3mm
Switch life
> 10 million life cycle time
Software support
MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac
Supporting layouts
America
United States
United Kingdom
Germany
France
Spain
Norway
Italy
Russia
Switzerland
Netherlands
Portugal
China
Japan
Korea
Arabia
Turkey
EMEA
Asia
P.8
www.rackmountmart.com
< 2.3 > On-screen Display Operation ( OSD )
Membrane Switch
Function
Turn the monitor on or off
Display the OSD menu
Act as an Enter key to select screen setting options
Scroll through menu options and adjust
the displayed control
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Remark : All LED touch buttons in WHITE light.
The LED of Power
touch button will flash continuously when there is no signal input.
1
All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power
2
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power
P.9
).
).
www.rackmountmart.com
< 2.3 > On-screen Display Operation ( OSD )
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
P.10
www.rackmountmart.com
< Part 3 >
< 3.1 > Options :
- HDMI
- DVI-D
- AV
- Audio
( HDMI 1.1, CEA-861-D )
( DVI-D TMDS single link )
( S-Video + Composite, BNC )
( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
( 1 ) For Ver.2.2 upgrade, either HDMI or DVI-D is provided.
( 2 ) For the above options, casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4" )
Power
HDMI
Audio
S-Video BNC
DVI-D
KVM
in - in - out
PC Video
P.11
www.rackmountmart.com
< 3.2 > Options : DC Power
Model
12V
24V
48V
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Input rating
Input current
Output rating
DC power
KVM
***
For DC power option :
( 1 ) Option excludes 1 x power cord and 1 x AC power adapter.
( 2 ) Casing depth will be extended from 500mm ( 19.7” ) to 570mm ( 22.4” )
The company reserves the right to modify product specifications without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2012 Synergy Global Technology Inc. All rights reserved.
P.12
www.rackmountmart.com