Charging interface
Bluetooth Keyboard Manual
Connect button
Bluetooth indicator light
Charge indicator light
Packing lnclude:
Caps Lock indicator light
1,A Bluetooth keyboard
2, A iPAD bag ( optional part )
capslock ch;rse
1. executive standard: Bluetooth V2.0
2. Working distance: 10 meters
3. modulation system: FHSS 2.4G
4. transmitting power: Class 2
Power Swi[ch
5. operating voltage: 3.0-5.0
3,A list of manual
4,USB charging cable (lf "Apple" 30 PIN
charging interface don't need)
6. word current: <5.0MA
T.standby current: 2.5MA
S.sleeping current: <200UA
9. charging current: ) 1 00MA
1 0. standby time:1 OOdays
1 1 . Theory of working Time: 2sdays
1 2.uninterrupted working time: 90 hours
13. charging time: 4-4.5 hours
14. Li-ion battery Capacity:
Minimum 430MAH
l5.lithium battery life: 3 years
1 6.lithium battery Specifications:
7.key strength:80 + 1 0g
1 8.key life:500 million
1 9.operating temperature:-20-+-55C
20.Storage temperatuer:-40-+70.C
Bluetooth Keyboard
Product Features:
1, With CW6627 as main control chip , with Bluetooth 2"0 interface
2, Use industry-leading Bluetooth solution, WIDCOMM BTW Bluetooth software which is specified software by
Microsoft official.
3, Specially design for IPAD, lt will be more convenient to carry with IPAD bag.
4, Buit-in power management software, lt can automatically show the available capacity in the Microsoft Windows
5, Silence design, lt will not affect other people's rest
6,lt is waterproof,dustproof, anti-pollution,anti-acid waterproof for silicone part
7,work with PC and commerical mobile, lt will be convenient to word.
S,wording temperaturer:-20 C-55'C humidity:.20%-50%
9. built-in lithium battery, you do not need to frequently change battery
Note: When you switch on the keyboard, Bluetooth light will be flashing in three seconds ,at this time
lhe keyboard do not connnect with any device, But the LED light will automatically be off if the keyboard still do not
oonnected to any device after the Led keep lighting for 5 seconds. The keyboard can connect when you switch on
after your first successfully use, the bluetooth light will be off after it
wuccessfully connect to device.
lnstal! Bluetooth Keyboard
IPAD Step 1: Find
jon the toggle switch, Bluetooth light will be flashing in 3 seconde, But after keep
lighting for 3 seconds, it wil be off.At this time the keyboard is in working situation.
(2) Press the connect button, the bluetooth light will be on so the keyboard is in
connecting situation.
1. How to install bluetooth keyboard into
(1 ) as shown,Turn
rect button
:3) Clik setting of the screen of the lpad. lpad will in setting area, then choose Bluetooth, open the bluetooth", lpad
is in searching bluetooth keyboard working situation.
Click setting in lpad
Step 2: Enter the password and connecl
It can search bluetooth
to enter password in the bluetooth keyboard
Note There will not have any prompt, just click enter after your enter passwork in the lpad will be
finished using your keyboard or you will be required after the keyboard to carry, so don't forget to
set aside the keyboard to switch the source OFF, turn off the keyboard's power to extend battery life
(2) When you need a long time storage your keyboard, please don't forget to pack the battery power, about half of
the filling, then store your keyboard, so can made your keyboard lithium life longer.
Note: When you normally using the keyboard, or if you are not using the keyboard and didn't turn off the power
switch, please don't fold or curly, so you will have been working at the keyboard, it will greatly decrease you using
the keyboard"
(1 ) When you are
connected successfully.
Step 3: Connect successfully, The key board is in working situation
&,l4 :
2.Do not put heavy object on keyboard too long
1.Keep away from sharp objects.
4.Don't force ten sile or distortion
3.Di not heating it in microwave oven
6.Do not press the keyboard when it is in folding state.
5.Keep away from oil or any other organic liquid.
7.Can wash silicone parts by water, alcohol, or alcohol disinfectant.
the keyboard is in woiking situation
. lf unable to connect the Bluetooth Keyboard to the computer, or
the steps below:
All light will be off after
it connect successfully, so the keyboard can work with IPAD successfully
The charge light keep flashing in your working ,the keyboard is short of power. lt is time to charge the keyboard.
Charging procedure as follows
(1 )' Use
the IPAD charger/usb charging cable plug into outlet, put one end of the plug into keyboard USB charging
the Keyboard work unconventionally, please try
you have done the Bluetooth Dongle installation
) Before you install your Bluetooth Keyboard, please make sure
procedure, and the Bluetooth facility is turned on.
(2) Press and release the connect button on the Bluetooth Keyboard. The b I u e led light will change into a
flashing mode.
(3) Make sure that the keyboard is within the effective orange--1 0M
(4) Make sure that there's no change of the Bluetooth facility. lf anything changed, please kindly rematch.
(5) lf your Bluetooth facility is connected to other Bluetoothproducts. please kindly confirm that the speed of the
Bluetooth facility is enough
cable ,as follows.
(2) Now blue indictor, aftercharging finish, blue indictorof f.(charging time:4.5 hours.)
(6) Please kindly check the batteries. if they are short of power, replace them for new ones.
(7) Please make sure that your Bluetooth Dongle is damaged or not.
2.Every time you turn off the keyboard power and after turn on it or reboot the computer shuts down, if it is no
(1 ) After the keyboard and the computer power, re-install back, the keyboard and the computer needs to re-invent
code, which may take 23 seconds of your time, if you shut down and then boot, or keyboard ,disconnect the power
re-opened, plesase you perss any key on the keyboard, and then wait three seconds, your keyboardcan be properly
TIPS: When your battery is low, charge lights on the key board will blink ,and you shouldgive your keyboard
charging, so as not to affect your work.
Federal Communication Commission lnter ference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device.
Pursuant to Part 15 of the FCC Rules. These limits are designed to provide resaonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radion frequency energy
and , if no installed and used in accordance with the instructions, may cause harmful interference to radio or
television reception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto
correct the interference by one of the following measures:
Reorient or relocate the receiving antenna
lncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any change or modifications no expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
FCC Radiation Exposure Statement:
1 .This equipment complies with FCC radiation eqposue limits ser forth for an uncontrolled environment . End
users must follow the specific operating instructions for satisfying RF eqposure compliance.
2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
connectedwith computeroriPAD,ifyouhavelSminutesnotuseit,thenitwill
enter into dormant state, you just press any key and wait 3 seconds, your keyboard will put right.
(([email protected] @O&E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF