Samsung DS80 - MM Micro System User manual

Samsung DS80 - MM Micro System User manual
1p~30p(DS80)- SEA
9/15/04 14:31
Page 2
DIGITAL HOME
THEATER SYSTEM
MM-DS80
SAMSUNG ELECTRONICS AMERICA, INC.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
Instruction Manual
COMPACT
VIDEO
AH68-01379R
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
1p~30p(DS80)- SEA
9/15/04 14:31
Page 4
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Precautions
PREPARATION
Safety Warnings
Note to CATV system installer :
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
Phones
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
1p~30p(DS80)- SEA
9/15/04 14:31
Page 6
Safety Instructions
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
WATER AND MOISTURE
Do not use this video product near waterfor example, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire
or electric shock.
VENTILATION
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product
should never be placed near or over a radiator or
heat register.
This video product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer's instructions have been
followed.
POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
3
CLEANING
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.
ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.
The video product may fall, causing serious injury to
a child or adult, and serious damage
to the appliance.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the video product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.
CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
POWER SOURCES
This video product should be operated only from the
type of power source indicated
on the marking label. If you are not sure
of the type of supply to your home, consult your
appliance dealer or local power company.
For video products intended to be operated from
battery power, or other sources, refer
to the operating instructions.
POWER LINES
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits,
or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
POLARIZATION
This video product is equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other.) This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
OUTDOOR ANTENNA GROUNDING
•If an outside antenna is connected to the
antenna terminal, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built-up static
charges.
In
• the U.S.A section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See the figure below.
ATTACHMENTS
Do not use attachments not recommended
by the video product manufacturer as they may
cause hazards.
SERVICING
•Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer
all servicing to qualified service personnel.
•
REPLACEMENT PARTS
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SAFETY CHECK
Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the
following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have
fallen into the video product.
c. If the video product has been exposed to rain
or water
d. If the video product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result
in damage and will often require extensive
work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped
or the cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance - this indicates
a need for service.
HEAT
This video unit should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that produce heat.
4
PREPARATION
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the appliance is operated.
1p~30p(DS80)- SEA
9/15/04 14:31
Page 8
Contents
PREPARATION
Features
PREPARATION
Multi-Disc Playback, AM/FM Tuner, Cassette Player/Recorder
The MM-DS80 combines the convenience of multi-disc playback capability,
including DVD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a sophisticated
AM/FM tuner and cassette tape player/recorder, all in a single unit
TV Screen Saver Function
The MM-DS80 automatically brightens and darkens the brightness of
the TV screen after 2 minutes in the stop or pause mode.
The MM-DS80 automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
Power Saving Function
The MM-DS80 automatically shuts itself off after 20 minutes in the stop or pause mode.
Customized TV Screen Display
The MM-DS80 allows you to select your favorite image during JPEG or
DVD playback and set it as your background wallpaper.
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Safety Instructions ..............................................................................................................................................................3
Features..............................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Connecting the Speakers....................................................................................................................................................11
Connecting to a TV .............................................................................................................................................................12
Connecting External Components ......................................................................................................................................13
Connecting the FM and AM Antennas ................................................................................................................................14
Setting the Clock.................................................................................................................................................................15
OPERATION
Disc Playback .....................................................................................................................................................................16
Displaying Disc Information ................................................................................................................................................17
Fast/Slow Playback.............................................................................................................................................................18
Skipping Scenes/Songs ......................................................................................................................................................19
Angle Function ....................................................................................................................................................................20
Repeat Playback.................................................................................................................................................................21
A-B Repeat Playback..........................................................................................................................................................23
Zoom Function ....................................................................................................................................................................24
Selecting Audio/Subtitle Language .....................................................................................................................................25
Moving Directly to a Scene/Song........................................................................................................................................26
JPEG File Playback ............................................................................................................................................................27
Using Disc Menu.................................................................................................................................................................29
Using the Title Menu ...........................................................................................................................................................30
SETUP
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
Setting the Language..........................................................................................................................................................31
Setting TV Screen type .......................................................................................................................................................33
Setting Parental Controls (Rating Level).............................................................................................................................35
Setting the Password ..........................................................................................................................................................36
Setting the Wallpaper..........................................................................................................................................................37
Setting the DRC (Dynamic Range Compression)...............................................................................................................39
AV SYNC Setup..................................................................................................................................................................40
RADIO OPERATION
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Listening to Radio ...............................................................................................................................................................41
Presetting Stations..............................................................................................................................................................42
TAPE DECK
Listening to a Cassette .......................................................................................................................................................43
REPEAT A↔B Function .....................................................................................................................................................44
Selecting the Cassette Playback Mode ..............................................................................................................................44
AH68-01508Y
MISCELLANEOUS
TV Broadcast System
• This device is designed to work with the NTSC video format.
• For normal playback, the video format a DVD disc is recorded in must coincide with your TV's video format.
5
Timer Function ....................................................................................................................................................................45
Canceling the Timer............................................................................................................................................................46
Recording a Compact Disc .................................................................................................................................................47
Recording a Radio Program ...............................................................................................................................................49
S.BASS/EQ, SRS WOW, SW LEVEL Function ................................................................................................................50
Sleep Timer Function / Mute Function ................................................................................................................................51
DEMO Function / DIMMER Function ..................................................................................................................................52
Connecting Headphones ....................................................................................................................................................53
Cautions on Handling and Storing Discs ............................................................................................................................54
Before Calling for Service ...................................................................................................................................................55
Notes on Discs....................................................................................................................................................................56
Notes on Terminology.........................................................................................................................................................58
Specifications......................................................................................................................................................................59
Warranty .............................................................................................................................................................................60
6
1p~30p(DS80)- SEA
9/15/04 14:31
Page 10
PREPARATION
Description
—Front Panel—
Push Eject (Cassette
Door OPEN/CLOSE)
—Rear Panel—
S-Video Output Connector
If the TV is equipped with an S-Video
input connector (S-VIDEO IN), connect
it to the player's S-Video output jack.
Video Output Connector
Function button
Power (
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
) button
AM Antenna Connector
Volume control
FM Antenna Connector
DEMO/DIMMER button
AUX button
REV.MODE button
AUX-Input
SRS WOW button
S/W LEVEL button
CD Door
OPEN/CLOSE button
CD SYNC. /
REC/PAUSE button
TUNING MODE/
STOP button
WOOFER
Disc Tray
S
P
E
A
K
E
R
S
Headphone Jack
Connector
SUBWOOFER Output Connector
L
R
Loudspeaker Connector Terminals
Tuning Up & Skip (
) buttons
Tuning Down & Skip (
) buttons
MP3 indicator
DVD indicator
TAPE indicator
Accessories
VIDEO CD indicator
E
LOS
N/C
OPE
Radio Antenna indicator
EZ
R
ME
DIM
DVD
SUB
/EQ
DSP
X
AU
W
SLO /ST
MO
AIN
REM
ER
TUN D
BAN
W
VIE L
C/PA
NTS
P
STE
E
TITL
EAT
REP
ING
TUN
II
PL
DE
MO
E
LUM
VO
TIMER indicator
RETURN
MENU
II
PL
ECT
EFF
INFO
MUTE
ER
ENT
disc indicator
P
SLEE
TEST
O
LOG
M
ZOO
EST
DIG
7
ER
TUN ORY
MEM
CD Synchro indicator
PROGRAM indicator
REC indicator
A↔B indicator
EDIT
CEL
CAN
DE
E MO
SLID
LPCM indicator
RADIO FREQUENCY
indicator
ND
SOU
DOLBY DIGITAL indicator
kHz
MHz
E
TON
System Status Display
Remote Control
(AH59-01252A)
Video Cable
(AH39-40001T)
FM Antenna
(AH42-00004A)
ROCK indicator
CLASSIC indicator
POP indicator
SRS WOW indicator
REPEAT indicator
AM Antenna
(AH42-20001P)
User's Manual
(AH68-01379R)
8
1p~30p(DS80)- SEA
9/15/04 14:32
Page 12
PREPARATION
Description
—Remote Control—
TV, DVD POWER button
SLEEP button
OPEN/CLOSE button
Insert Remote Batteries
1
REMAIN button
DVD button
TAPE button
TUNER BAND button
AUX button
STEP button
ZOOM button
SUBTITLE button
SLOW, MO/ST button
REPEAT button
Play/Pause button
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Stop button
Tuning Preset/CD Skip button
SRS WOW button
TUNING button
MENU button
RETURN button
S.BASS/EQ button
VOLUME button
INFO button
MUTE button
Direction/Enter button
Number(0~9) buttons
REPEAT A<–> B button
LOGO COPY button
EZ VIEW button
9
SUBWOOFER LEVEL button
SLIDE MODE button
DIGEST button
TIMER ON/OFF button
TIMER/CLOCK button
CANCEL button
TUNER MEMORY button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
10
1p~30p(DS80)- SEA
9/15/04 14:32
Page 14
Connecting the Speakers
Connecting to a TV
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Please be sure to turn off the power and unplug the power cord before moving or installing this unit.
Please choose one of two video connection methods.
Method 1
CONNECTIONS
Subwoofer
Using Video Out (Cable Included)
Left Speaker
Right Speaker
1
Connect Video Out on the player to Video In
on your TV.
2
Press the TV/VIDEO button on the remote of TV
control to set the TV to "VIDEO".
WOOFER
S
P
E
A
K
E
R
S
Red
L
R
Red
Black
S
P
E
A
K
E
R
S
Black
L
R
Method 2
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
Front Speakers L R
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
Using S-Video Out (Cable Not Included)
Selecting the Listening Position
Use this method if your TV has an S-Video In jack.
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
1
Connect S-Video Out to S-Video In on your
TV.
2
Press the TV/VIDEO button on the remote control
of TV to set the TV to "S-VIDEO".
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed in a corner near the front speakers.
front face of the center speaker or place them
slightly in front of the center speakers.
Note
• Installating the speakers near a heating apparatus, under direct sunlight, or in areas with with high humidity may
cause performance degradation.
• Do not install speakers on a wall or pole, or any other unstable area.
• Do not place the speaker close to a TV or computer monitor as it may influence the quality of the screen display.
Note
• Composite Video: A single video signal that is a composite of the black-and-white
information (Y) and the color information (C).
• S-Video: A video transmission standard that provides a sharper, brighter picture
than ordinary composite video by separating brightness and color signals.
11
12
1p~30p(DS80)- SEA
9/15/04 14:32
Page 16
Connecting External Components
Connecting the FM and AM Antennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
CONNECTIONS
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
AM Loop Antenna
(supplied)
R
L
FM Antenna (supplied)
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
WOOFER
S
P
E
A
K
E
R
S
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
1
2
Connect Audio In on the DVD player to Audio Out on the external analog component.
• Be sure to match connector colors.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
L
R
AM antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Cooling Fan
Press AUX to select AUX.
• ‘AUX’ appears in the display.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
WOOFER
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
S
P
E
A
K
E
13
L
newspaper or cloth, heat may build up inside the unit and fire may result.)
14
1p~30p(DS80)- SEA
9/15/04 14:32
Page 18
Setting the Clock
Disc Playback
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
2
Press TIMER/CLOCK
twice.
• CLOCK is displayed.
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
• Increase the minutes :
• Decrease the minutes :
3
Press ENTER.
The hour flashes.
• Increase the hours :
• Decrease the hours :
5
• "TIMER" appears in the display.
• The current time is now set.
2
Load a disc.
3
Note
When the correct
time is displayed,
press ENTER.
1
Press OPEN/CLOSE button to open the
disc tray.
• Remove discs from the unit
before setting the clock.
• You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
CONNECTIONS
1
Switch the system
on by pressing
POWER button.
• Place a disc gently into the tray with the disc’s label
facing up.
Press OPEN/CLOSE button to close the disc
tray.
DVD
VCD
CD
• Playback starts automatically.
MP3
JPEG
• Playback starts automatically.
• If the TV is on, a list of MP3s on
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
the CD will appear on the TV
screen.
Checking the Remaining Time
Press the REMAIN button.
Note
• For checking the total and remaining time of a title or chapter being played.
on the disc.
Each time the REMAIN button is pressed
TITLE ELAPSED
TITLE REMAIN
DVD
CHAPTER ELAPSED
CHAPTER REMAIN
15
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• Table of contents of a MP3-CD varies depending on the MP3 track format recorded
TRACK ELAPSED
VCD
CD
TRACK REMAIN
TOTAL ELAPSED
To stop playback,
press STOP during playback.
To temporarily pause playback,
press PLAY/PAUSE during playback.
• If pressed once, “PRESS PLAY” is displayed and the
• To resume playback, press PLAY/PAUSE
TOTAL REMAIN
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
button again.
16
1p~30p(DS80)- SEA
9/15/04 14:32
Page 20
Displaying Disc Information
Fast/Slow Playback
You can view playback information on the disc on the TV screen.
Fast Playback
DVD
VCD
CD
MP3
Press INFO button.
Press and hold
• Each time the button is pressed, the display changes as follows:
.
• Each time the button is held down during playback,
DVD
VCD
CD
MP3
the playback speed changes as follows:
JPEG
OPERATION
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
Display disappears
Display disappears
Slow Playback
Display disappears
•
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Note
• What is a Title?
• Depending on the disc, the disc
•
information display may appear different.
Depending on the disc, you can also
select DOLBY DIGITAL, or PRO LOGIC.
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
A movie contained in a DVD disc.
VCD
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
• What is a Track (File)?
A section of video or a music file recorded on a VCD, CD, or MP3-CD.
Screen Display
DVD display
MP3 CD display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
VCD display
TITLE display
ELAPSED TIME display
SUBTITLE display
ANGLE display
Note
CD display
17
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
• Reverse slow playback does not
work with VCDs.
18
1p~30p(DS80)- SEA
9/15/04 14:32
Page 22
Skipping Scenes/Songs
Angle Function
This function allows you to view the same scene in different angles.
DVD
VCD
DVD
MP3
Briefly press
1
.
• Each time the button is pressed briefly during playback, the previous or next chapter,
track, or directory (file) will be played.
Press INFO button.
2
Press Cursor
button to move to
ANGLE display.
• But, you cannot skip chapters consecutively.
VCD
MP3
1/3
1/3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
3
Press Cursor , buttons or numeric buttons
to select the desired angle.
• Each time the button is pressed, the angle changes as follows:
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
1/3
2/3
3/3
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Playing Frame by Frame
DVD
Press STEP button.
• The picture moves forward one frame each time the
button is pressed during playback.
Note
• The Angle function works only with discs on which multiple angles
have been recorded.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
19
20
OPERATION
DVD
1p~30p(DS80)- SEA
9/15/04 14:32
Page 24
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
DVD
VCD
CD
MP3
CD
To Select a Repeat Playback Mode
in the Disc Information Screen
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
MP3
JPEG
1
Press INFO button
twice.
2
3
Press Cursor
button to select the
desired Repeat
Playback mode.
4
Press Cursor
button to move to
REPEAT PLAYBACK
( ) display.
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE
Repeatedly plays the selected title.
RANDOM
Plays tracks in random order.
(A track that has already been played
may be played again.)
TRACK
Repeatedly plays the selected track.
VCD
CD
FOLDER
Repeatedly plays all tracks in the
selected folder.
Press ENTER
button.
DVD
DISC
Repeatedly plays the entire disc.
OFF
Cancels Repeat Playback.
VCD
CD
Note
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on.
Note
To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc menu. (See page 29.)
• For MP3 and JPEG discs, you cannot select Repeat Play
from the information display screen.
21
22
OPERATION
DVD
VCD
1p~30p(DS80)- SEA
9/15/04 14:32
Page 26
A-B Repeat Playback
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
DVD
1
VCD
DVD
VCD
CD
REPEAT : A–
2
Press REP. A↔B
at the end of the
section.
1
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
3
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
REPEAT : A–B
To cancel AB Repeat Playback, press REP. A↔B to
select "REPEAT PLAYBACK: CANCEL".
ENTER SELECT
Aspect Ratio
DVD
REPEAT : CANCEL
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
SCREEN FIT OFF
EZ VIEW OFF
Note
• A–B Repeat Playback does not work on MP3 and JPEG discs.
• To select AB Repeat Playback from the information display screen,
press REP. A↔B.
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
23
24
OPERATION
Press REP. A↔B
at the beginning of
the section you
want to repeat.
Press ZOOM
button.
1p~30p(DS80)- SEA
9/15/04 14:32
Page 28
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
2
Press INFO button
twice.
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
Moving Directly to a Scene/Song
DVD
1
VCD
CD
Moving to a Title/Track
Press INFO button.
2
Moving to a Chapter
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
3
Press Cursor ,
buttons to move to
Chapter ( ) display.
DVD disc, a different audio language (SPANISH,
ENGLISH, FRENCH, etc.) is selected each time
the button is pressed.
01/05
001/040
0:00:37
1/1
001/002
03/05
0:00:01
1/1
01/05
001/040
0:00:01
1/1
EN 2/3
Moving to a Chapter
JA 3/3
Subtitle Language Selection Function
1
2
Press INFO button
twice.
DVD
4
Press Cursor
button to move to
SUBTITLE ( )
display.
01/05
MP3
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
Note
KO 01/ 03
0:00:01
1/1
025/040
01/05
remote control to select a subtitle
language.
Depending on the disc, the Subtitle and
Audio Language functions may not work.
1:17:30
6
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
1/1
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
Note
SELECT 03
DVD RECEIVER
Move
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
Select
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
• You can press
Stop
•
on the remote
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
from the disc information screen.
EN 02/ 03
• When playing an MP3 or JPG disc, you
JA 03/ 03
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
OFF / 03
25
OFF
025/040
5
Moving to a Specific Time
Press Cursor ,
buttons to move to
time display.
• You can use the SUBTITLE button on the
•
KO 1/3
Press Cursor , buttons
or numeric buttons to select
the desired chapter and
then press ENTER button.
Moving to a Specific Time
26
OPERATION
• Depending on the number of languages on a
1p~30p(DS80)- SEA
9/15/04 14:32
Page 30
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Slide Mode
Digest Function
You can view 9 JPEG images on the TV screen.
1
1
Place the JPEG disc on the disc tray.
Press DIGEST
button during
playback.
2
• The selected image is played for 5 seconds before moving to
9 windows.
2
Press the OPEN/CLOSE button.
• Playback starts automatically.
• Each image is shown for 5 seconds before another image is displayed.
3
the next image.
To view the previous or next image with 9 windows, press
.
Press SLIDE MODE button.
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
Rotate/Flip Function
From top to bottom
Press Cursor
,
,
,
buttons during playback.
From bottom to top
Rectangular shape in the center
button: Flip Vertically
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be randomly and automatically be applied.
button: Rotate 90°
Counterclockwise
button: Rotate 90° Clockwise
Original Image
Cancels the slide mode.
button: Flip Horizontally
27
Press
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
28
OPERATION
• JPEG files will be shown in
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
1p~30p(DS80)- SEA
9/15/04 14:32
Page 32
Using Disc Menu
Using the Title Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
For DVDs containing multiple titles, you can view the title of each movie.
DVD
1
DVD
In Stop mode,
press MENU
button.
this toggles between PBC ON and
OFF.
3
Press Cursor , ,
, buttons to
select the desired
item.
• When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
4
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
Press ENTER
button.
Press MENU button to exit the setup screen.
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be
disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
29
30
OPERATION
• When playing a VCD (version 2.),
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
31P~62P(DS80)- SEA
9/15/04 14:34
Page 30
Setting the Language
OSD language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press ENTER
button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu
Language (recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
31
32
31P~62P(DS80)- SEA
9/15/04 14:34
Page 32
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
4:3LB
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
4:3PS
(4:3 Pan&Scan)
SETUP
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
(4:3 Letterbox)
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
be taken to the previous screen.
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
33
34
31P~62P(DS80)- SEA
9/15/04 14:34
Setting Parental Controls (Rating Level)
Setting the Password
Use this to restrict playback of adult or violent DVDs you do not want children to view.
You can set the password for the Parental (rating level) setting.
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
1
4
• The password is set to "7890" by default.
• Once the setup is complete, you will be
Press MENU button.
Press ENTER
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
SETUP
1
In Stop mode,
press MENU
button.
•
Page 34
• Enter the old password, a new
password, and confirm new password.
taken to the previous screen.
• The setting is complete.
Note
Note
• This function works only if a DVD disc
• The password is set to "7890" by default.
contains the rating level information.
35
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
36
31P~62P(DS80)- SEA
9/15/04 14:34
Page 36
Setting the Wallpaper
JPEG
VCD
DVD
While watching a DVD, VCD, or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when the image you
like comes up.
2
To Change the Wallpaper
Press LOGO
button.
1
In Stop mode,
press MENU
button.
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “LOGO COPY DATA” will be
displayed on the TV screen.
LOGO COPY DATA
PAUSE
• The selected wallpaper will be
displayed.
4
Press OPEN/
CLOSE to close
the disc tray.
SETUP
3
The power will turn off
and then back on and
the disc tray will open
automatically.
• You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Select this to set the
Samsung Logo image as
your wallpaper.
37
Select this to set the desired
image as your wallpaper.
38
31P~62P(DS80)- SEA
9/15/04 14:34
Page 38
Setting the DRC (Dynamic Range Compression)
AV SYNC Setup
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press MENU button in the
stop mode.
2
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
1
Press the MENU button in
the stop mode.
• Setup menu appears.
4
Press Cursor ,
adjust the ‘DRC’.
• The Cursor
to
button is pressed, the greater
the effect, and the Cursor button is
pressed, the smaller the effect.
39
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
• AV-SYNC screen appears.
• 'Audio' menu appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
40
SETUP
3
If “DRC” is selected,
press ENTER.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
31P~62P(DS80)- SEA
9/15/04 14:34
Page 40
Listening to Radio
Presetting Stations
You can store up to:
You can listen to the chosen band (FM, MW, LW broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER/
BAND button.
• The selection toggles back
and forth between "FM" and
"AM" each time the
TUNER(BAND) button is
pressed.
• FM
• AM(MW)
15 FM stations
15 AM stations
Frequency Modulation
Medium Wave
Example: Presetting FM 89.1 in the memory
2
Tune in to the
desired station.
Press the STOP ( ) button
to select PRESET and then
button to select the preset station.
1
Automatic Tuning 1
press
Press the STOP ( ) button to
select "AUTO" and then press
button to automatically search the band.
Automatic Tuning 2
Press the
TUNER(BAND)
button and select
the FM band.
• Each time the button is pressed,
the band switches between
"FM" and "AM".
Manual Tuning
2
Press
to
select "89.10".
• Refer to Step 2 on page 41 to
automatically or manually tune in
to a station.
kHz
MHz
3
Press the TUNER
MEMORY button.
• “PROG” flashes in the
display.
kHz
MHz
kHz
MHz
Press the STOP ( ) button to select
"MANUAL",Briefly press
to increase
or decrease the frequency incrementally.
Main Unit
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button
to select "AUTO" and then
press and hold
button to
automatically search the band.
4
Press
to
select preset
number.
• You can select between 1 and
5
Press the TUNER
MEMORY button.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
‘PROG’ disappears from the display.
15.
• ‘PROG’ disappears from the display and
the station is stored in memory.
Automatic Tuning 2
kHz
MHz
kHz
MHz
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
41
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
To tune in to a preset station, press
remote control to select a channel.
on the
42
RADIO OPERATION
1
Press the Function
button to select the
desired band (FM,
AM).
31P~62P(DS80)- SEA
9/15/04 14:35
Page 42
Listening to a Cassette
REPEAT A↔B Function
Always treat your cassettes with care; refer, if necessary, to the section entitled
“Precautions When Using Audio Cassettes” on page 56.
Press REP. A↔B button.
• Use this to listen to a specific section again during playback.
• Set the start and end points of the section you want to repeat 3 times.
• This is a useful when learning a foreign language.
• The TAPE REPEAT function can be used only on sections that are longer
than 7 seconds.
Note
• You cannot set the end point (B) within 7 seconds after
setting the start point (A).
1
Switch the system
on by pressing
POWER.
2
3
Press TAPE on
the player to
select the Tape
function.
Press the PUSH
EJECT ( ) of the
cassette deck to open
the cassette door and
insert a cassette.
Selecting the Cassette Playback Mode
• Insert a cassette with the tape
Your micro component system has three cassette playback modes which enable
you to listen to both sides of a cassette automatically.
side facing front, and then push
the cassette door shut.
Press REV.MODE until the appropriate symbol is
displayed.
• Side A : Press (
• Side B : Press (
) button once.
) button twice.
5
• Rewind the cassette with the
/
When you have
finished playback,
press STOP button.
•
: One side of the selected cassette and then stops.
•
: One side of the cassette.
The other side of the cassette and then stops.
•
: Both sides of the cassette indefinitely until you press stop.
DOWN button.
• Fast-forward the cassette with the
UP /
43
6
Press the
,
button if necessary.
TAPE DECK
4
Press the
button. The cassette
starts playing.
button.
44
31P~62P(DS80)- SEA
9/15/04 14:35
Page 44
Timer Function
Canceling the Timer
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
After having set the timer, it will start automatically as shown by the TIMER indication on the display.
If you no longer wish to use the timer, you must cancel it.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
1
Switch the system
on by pressing
POWER.
2
Press
TIMER/CLOCK
until TIMER is
displayed.
3
Press the ENTER
button.
• ON TIME is displayed (instead of
To cancel the timer, press TIMER ON/OFF
once.
•
is no longer displayed.
the equalizer symbols) for a few
seconds, followed by any switch-on
time previously set; you can now
set the timer switch-on time.
4
Set the timer
switch-on time.
a. Set the hour by pressing
or
button.
b. Press ENTER.
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switchoff time previously set; you can
now set the timer switch-off time.
7
Press or button
to select the source to
be played when the
system switches on.
5
a. Set the hour by pressing
or
button.
b. Press ENTER.
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press or button
to adjust the volume
level and press
ENTER.
To resume the timer, press TIMER ON/OFF
again.
•
is displayed again.
• The source to be selected is
displayed.
Note
• You can cancel the timer while the power is on or while the player is in standby.
9
•
Press POWER to
set the system to
standby mode.
is displayed to the top right of
the time, indicating that the timer
has been set.
The system will switch on and off
automatically at the time set.
Note
• If the timer switch on and off times are identical, the word ERROR is displayed.
46
MISCELLANEOUS
b Select a preset
station by pressing
Tuning or .
CD (compact disc) : Load a compact
disc.
45
Press ENTER to
confirm the timer.
6
•
• TAPE (cassette) : Insert a cassette
tape.
• TUNER (radio) : a Press ENTER.
•
Set the timer
switch-off time.
31P~62P(DS80)- SEA
9/15/04 14:35
Page 46
Recording a Compact Disc
You can record a compact disc on a cassette in two different ways:
Synchronized recording
Direct recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
The direct recording mode enables you to start recording with any track on the compact disc.
1
Switch the system
on by pressing
POWER.
2
Insert a blank
cassette in Deck.
• Press the PUSH/EJECT button (
•
4
Press the DVD/CD
(
) button.
• Use the CD selection (
5
• Press and hold
•
47
Press and hold the
(CD SYNC/
REC PAUSE) button.
(CD SYNC/
REC/PAUSE) button during the
playback of CD to start the recording
from the first part of the music being
played.
When stopped, press and hold
(CD SYNC/ REC/PAUSE) button to
start the recording from the first
piece of music.
• Press the OPEN/CLOSE button (
•
1
Switch the system
on by pressing
POWER.
• Press the PUSH/EJECT button (
)
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
6
To stop recording,
press button.
2
Insert a blank
cassette in Deck.
•
4
Press the DVD/CD
(
) button.
• Use the CD selection (
,
)
buttons to select the desired song.
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert the cassette with the safety
tabs.
5
Press (do not hold)
CD SYNC/REC
PAUSE button.
• Recording will begin.
• To stop recording, press
3
Load a compact
disc.
• Press the OPEN/CLOSE button (
•
)
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
Note
• The cassette tape you want to record
on must have the safety tabs intact.
button.
48
MISCELLANEOUS
,
)
buttons to select the desired song.
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert a cassette with the safety tabs
intact.
3
Load a compact
disc.
31P~62P(DS80)- SEA
9/15/04 14:35
Page 48
Recording a Radio Program
S.BASS/EQ, SRS WOW, SW LEVEL Function
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the recording.
S.BASS/EQ Function
Your micro component system is equipped with a preset equalizer that
allows you to choose the most appropriate balance between treble and
bass frequencies, according to the type of music you are listening to.
Press S.BASS/EQ on the remote control
until the required option is selected.
• Press the button repeatedly to select “CLASSIC ➝ ROCK
•
➝ POP ➝ S.BASS➝OFF ”.
S.BASS Function : S.Bass function emphasizes the bass
sound.
SRS WOW Function
1
Switch the system
on by pressing
POWER.
2
Insert a blank
cassette.
3
Select the
TUNER function
by pressing
TUNER/BAND.
You can enjoy realistic surround sound by using the SRS and TruBass
sound functions. The SRS WOW function enhances sound clarity.
Press the SRS WOW button.
• Each time the button is pressed, the selection changes as
•
•
•
follows: TRU BASS ➝ SRS ➝ SRS WOW➝OFF.
TruBASS Function : Enhances the bass and low frequencies to
produce deep and rich bass sounds.
SRS Function : Provides the surround sound that fills the room.
SRS WOW Function : Provides the surround sound effects with
enhanced sound field depth and bass, through speakers and
headphones.
Note
4
5
Press
(CD
SYNC/ REC/PAUSE)
button.
• REC is displayed in red and
recording starts.
6
To stop recording,
press button.
SRS Labs, Inc.
SW LEVEL Function
You can adjust the subwoofer level to match your listening preference.
Press the SW LEVEL button.
• Each time the button is pressed, the selection changes as
49
follows: SUBWOOFER 1 ➝ SUBWOOFER 2 ➝ SUBWOOFER 3
➝ SUBWOOFER OFF.
50
MISCELLANEOUS
Select the radio
station that you wish
to record by pressing
/DOWN or UP/
button .
is a trademark of SRS Labs, Inc.
•
• WOW technology is incorporated under license from
31P~62P(DS80)- SEA
9/15/04 14:35
Page 50
Sleep Timer Function / Mute Function
DEMO Function / DIMMER Function
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• Each time the button is pressed, the selection changes as follows:
90 MIN ➝ 60 MIN ➝ 45 MIN ➝ 30 MIN ➝ 15 MIN ➝ OFF.
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Note
DEMO Function
DIMMER Function
You can view the various functions available on
your system.
You can adjust the brightness of the display on the main
unit so it won't interfere with your movie viewing.
Press and hold DEMO/DIMMER
button.
• This function can operate in any mode
(ex. DVD/CD, TUNER, TAPE and AUX).
• The various functions available are listed in turn on the
Mute Function
This is useful when answering a doorbell or telephone call.
•
display.
All these functions are described in detail in this manual.
For instructions on how to use them, refer to the
appropriate sections.
Press DEMO/DIMMER button.
• Each time the button is pressed, the brightness changes as
follows: DIMMER ON(Dim) ➞ DIMMER OFF(Bright).
Press MUTE button.
To cancel this function, press
DEMO/DIMMER again.
kHz
MHz
51
52
MISCELLANEOUS
• ‘MUTE ON’ appears in the display.
• To turn off mute, press the button again.
31P~62P(DS80)- SEA
9/15/04 14:35
Page 52
Connecting Headphones
You can connect a set of headphones to your mini-compact system so that you can
listen to music or movies without disturbing other people in the room.
The headphones must have a 3.5ø jack or an appropriate adapter.
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
MIC
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
Connect the headphones to the PHONES jack on the front panel.
Precautions When Using Audio Cassettes
• The loudspeakers are no longer used to output the sound.
• Check that the tape in the cassette is sufficiently taut.
• To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the
cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive
tape.
When you have finished playing a cassette, always put it back in its case.
Note
• Prolonged use of headphones at a high volume may damage your hearing.
temperatures.
• Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.
54
MISCELLANEOUS
53
•
• Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high
31P~62P(DS80)- SEA
9/15/04 14:35
Page 54
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Audio language and
subtitles do not work.
• Is the region code of the disc "1" or "ALL"?
Menu screen does not appear even
when the menu function is selected.
•
•
The remote control does
not work.
Playback does not start
immediately when the
Play/Pause button is
Sound is not produced.
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Make sure that the rating level is correct.
• Is the remote control being operated within its operation range of
• Are you using a deformed disc or a disc with scratches on
correctly customized?
• Is the disc severely damaged?
55
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Are you using a disc that does not contain menus?
The rating level password
level has been forgotten.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the SRS WOW button on the main unit
for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While the player is in the stop mode, hold the main unit's TUNING
MODE/ button for longer than 5 seconds. “INITIALIZE” appears on
the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
56
MISCELLANEOUS
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Was the DVD player suddenly moved from a cold place to a warm
them. And depending on the disc, they may work differently.
The tape does not start
playing
the surface?
motion playback.
• Audio language and subtitles will not work for DVDs not containing
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
• Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
Check/Remedy
Aspect ratio cannot be
changed.
angle and distance?
• Are the batteries exhausted?
• Are the speakers connected properly? Is the speaker setup
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
Symptom
31P~62P(DS80)- SEA
9/15/04 14:35
Page 56
Notes on Discs
Disc Recording Format
Notes on Terminology
ANGLE
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs may
not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you
may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the
disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
CHAPTER
NUMBER
DVD
PCM
•
•
•
disc can be played only up to the blank segment.
A maximum of 9,999 images can be stored on a single CD.
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
Copy Protection
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
TRACK NUMBER
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD
57
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
58
MISCELLANEOUS
•
player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copyprotected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
31P~62P(DS80)- SEA
9/15/04 14:35
Page 58
SAMSUNG DVD PLAYER
Specifications
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
G
E
N
E
R
A
L
T
F U
M N
E
T
MW U
/ N
LW E
R
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
VIDEO
OUTPUT S-VIDEO
A
M
P
L
I
F
I
E
R
Front speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
S
P
E
A
K
E
R
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
77W
12.1Ibs
7.6 x 6.8 x 13.7 inches
41°F ~ 95°F
10%~75%
3dB
60dB
1.0%
56dB
40dB
2%
1.0Vp-p(75Ω load)
Luminance signal : 1.0Vp-p(75Ω load)
Color Signal : 0.286Vp-p(75Ω load)
30W(6Ω)/CH
50W(3Ω)
20Hz~20kHz
75dB
50dB
(AUX)500mV
2.1ch speaker system
Speakers
6Ω x 2
75Hz~20kHz
84dB/W/M
30W
60W
6.3 x 10.7 x 7.8 inches
6.1 Ibs
Subwoofer speaker
3Ω
60Hz~250Hz
84dB/W/M
50W
100W
8.0 x 6.7 x 11.1 inches
6.4 Ibs
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be
performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the
purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG
manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges;
customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and
prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
To obtain warranty hardware service, please contact SAMSUNG at:
59
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001
1-800-SAMSUNG (1-800-726-7864) and www.SAMSUNGUSA.com
60
MISCELLANEOUS
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement