FEATURES TYPICAL SPECIFICATIONS

FEATURES TYPICAL SPECIFICATIONS
Project/Location:
Contractor:
Date:
LSR900 Series
Prepared by:
Extruded Aluminum Exit Sign
Lumacell Model:
FEATURES
TYPICAL SPECIFICATIONS
6 to 24VDC input
•CSA certified, meets or exceeds C860 requirements
Supply and install the Lumacell® LSR900 Series LED Exit Sign. The equipment
shall operate with universal AC input voltage of 120, 277 or 347VAC at less
than 1.5W and universal two-wire DC input voltage from 6VDC to 24VDC at
less than 1.5W for single and double face signs. The Exit Sign shall consist
of a two-piece white extruded aluminum combined body/faceplate with a
maximum depth of 1-1/4”. The exit shall also include extruded aluminum
end caps with white gaskets in order to provide protection to the internal
components and eliminate any possible light leaks. The exit fixture shall be
either single or double-faced as shown on the drawings. The faceplate shall
be of a stencil design and will incorporate 6” high letters with a 3/4” stroke.
The canopy shall fasten to the exit body for ease of installation in either ceiling
or end to wall mount.
The fixture shall contain a light source, which shall be LED with a long life and
shall consist of separate AC and DC LED sources in the case of AC/DC-remote
equipment. Red LED technology shall be ALINGAP.
The Exit Sign in a Self-Powered configuration shall be equipped with a NickelCadmium battery and shall stay illuminated during emergency operation for at
least two hours upon AC failure.
The Exit Sign shall be CSA-C860 approved.
.
The equipment shall be Lumacell® Model:
•Thin profile, 2-piece extruded aluminum housing simply slides together
•Available in single or double face
•Pre-specified mounting
•Universal, field-selectable chevrons (knockout)
•Indirect refractive technology provides bright, even illumination
•Long-life, ALINGAP technology energy-efficient LED light source
•Energy efficient – consumes less than 3.5W in AC or DC mode
•Normal AC and emergency DC operation – 120, 277 or 347VAC input;
DIMENSIONS
WIRE GUARDS
Dimensions are approximate and subject to change.
460.0057-L
95/8” [24.3 cm]
55/8” [14.2 cm]
87/8” [22.5 cm]
47/8” [12.5 cm]
Wall Mount
460.0048-L
End Mount
460.0058-L
Ceiling Mount
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/DC standard,
120/277/347VAC Less than 1.5W
red
191/8” [48.6 cm]
13/8” [3.4 cm]
197/8” [50.4 cm]
AC/ special
DC, red
120/277/347VAC Less than 1.5W
6 to 48VDC
Less than 1.5W
36/48/120VDC
Less than 3W
120VAC/DC two
wires, red
120VAC
Less than 3W
120VDC
Min. 3W
Self-Powered,
red
120/347VAC
Less than 3.5W
Ni-Cd Battery
Min. 2 hours
ORDERING INFORMATION
SERIES
LSR9= sortie
FACEPLATES / MOUNTING
00= single face, surface wall mount
10= single face, surface ceiling mount
20= single face, surface end mount
30= double face, surface ceiling mount
40= double face, surface end mount
COLOUR
Blank= polar white
BK= black
TA= textured aluminum
BA= brushed aluminum
VOLTAGE
UNIV= 120/277/347VAC, 6 to 24VDC
UNIV36= 120/277/347VAC, 36VDC, 4 wires
UNIV48= 120/277/347VAC, 48VDC, 4 wires
UNIV120= 120/277/347VAC, 120VDC, 4 wires
SP= 120/347VAC, Self-Powered
120VACDC= 120VAC, 120VDC, 2 wires
OPTIONS
TP= tamper proof screws
990.0119-L= tamper proof bit*
*One bit needed per order.
EXAMPLE: LSR900UNIV
www.lumacell.com
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement