A L A R M C A R B O N CO614B MONOXIDE

A L A R M C A R B O N CO614B MONOXIDE
CARBON
MONOXIDE
ALARM
CAT.
CO614B
CO
DIGITAL DISPLAY
Convenient display offers visual
confirmation and remembers highest
CO levels detected.
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
TWO SILENCE
FEATURES
Silences low battery chirp for up to
eight hours or silence nuisance alarm
for several minutes.
END OF LIFE SIGNAL
Provides audible and visual notice when
alarm needs to be replaced.
9V BATTERY BACKUP
Alkaline battery backup.
120V AC, 60Hz Plug-in
with 9V Battery Backup
Description:
The First Alert/BRK Cat. No. CO614B direct plug-in, 120V AC, 60Hz single station
carbon monoxide alarm is specifically designed for residential and institutional
applications including sleeping rooms of hospitals, hotels, motels, dormitories
and other multi-family dwellings. Model CO614B complies with UL2034 and
other agencies that model their codes after the above agencies. Model CO614B
meets code where plug-in AC/DC carbon monoxide alarms are allowed.
The CO614B features an electrochemical CO sensor, an 85dB horn, an End of
Life signal, a single button for test/silence and an LED power indicator. The low
power warning indicator will cause the alarm to “chirp” when the batteries need
replacing. This alarm has two silence features. Low Battery Silence: Temporarily
silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm
for several minutes. The CO614B also features a digital display that shows visual
confirmation of CO levels and has Peak Level Memory, remembers and displays
the highest levels detected when the multi-function button is pressed. The
CO614B is designed to be plugged directly into a standard non-switched outlet.
CAT.
CO614B
TECHNICAL SPECS
CO
TOP/END VIEW
MOUNTING
BRACKET
SIDE VIEW
2.2"
Alarm Dimensions:
Weight:
Operating Voltage:
Operating Current:
Temperature Range:
Humidity Range:
Audio Alarm:
Test/Silence:
5.9"
3.6"
5.9” H x 3.6” L x 1.5" D
6.5 oz
120V AC 60Hz w/ 9V battery backup
.09 amps (standby/alarm)
40°F (4°C) to 100°F (38°C)
10% to 95% relative humidity (RH)
85dB at 10 feet
Electronically simulates carbon
monoxide condition, causing the unit to alarm
Press and hold test/silence button
Alarm Reset:
Automatic when CO clears
CO Sensor:
Electrochemical
Indicator Lights/Sounds:
AC Power:
Constant Red LED, Display: blank
DC Power:
Intermittent Red LED, Display: "bAt"
Local Alarm:
Red LED flashes rapidly, Display: CO level in PPM
1.5"
Listing:
1.5"
Listed to UL2034 Standard
ARCHITECTURAL AND ENGINEERING SPEC
The carbon monoxide alarm shall be a BRK Model CO614 and shall provide at a
minimum the following features and functions:
1. An electrochemical CO sensor and an LCD multifunction digital display with peak
CO level memory capability.
2. Powered by 120V AC, 60Hz and have a monitored 9V battery backup and a solid
state piezo horn rated at 85dB at 10 ft. and shall be capable of self restoring.
3. The unit shall perform self diagnostic tests and issue a malfunction warning both
audibly (three chirps) and visually (“Err” in display) if the unit malfunctions.
4. The unit shall have an "End of Life" signal. This signal should be capable of
temporarily being silenced for up to 2 days. After about 2 days, the signal will
resume. After about 2-3 weeks the signal cannot be silenced.
5. A visual LED power-on indicator to confirm unit is receiving power or to confirm
unit has switched to battery backup mode. In battery backup mode, digital
display indicates “bAt”; “bAt” indication will flash if battery is weak or missing.
6. The CO sensor is adjusted not to detect CO levels below 30 PPM and will not
alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm
at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO
between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes.
7. A test/silence button to check all alarm functions and to silence any nuisance
alarms. In addition, the unit shall have a low battery silence feature to quiet the
low battery chirp for up to eight hours.
8. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and
relative humidity between 10% and 95%.
9. The unit shall at a minimum meet the requirements of UL2034, NFPA 720 and ICC.
SHIPPING SPECS:
Individual Carton Dimensions
Weight
Cube
UPC
6.81"L x 3.99"W x 2.38"H
0.61 lbs.
0.037 ft3
0 29054 00382 9
Master Carton Dimensions
Master Pack
Weight
Cube:
I2 of 5:
7.69"L x 7.31"W x 7.38"H
6
4.0 lbs.
0.24 ft3
600 29054 00382 1
Pallet Information
Cases per Layer
Number of Layers:
Cases per Pallet:
Units per pallet:
Cube:
Weight:
30
6
180
1,080
49.3 ft3
785 lbs.
INSTALLATION OF ALARM
Installation of this smoke alarm must conform to all local electrical codes and Article 760
of the National Electrical Code (NFPA 70) and NFPA 720.
THE PARTS OF THIS CO ALARM
1
3
2
5
1.
Test/Silence/Scroll Button
2.
POWER/ALARM Light
3.
Digital Display
4.
Air Vents
5.
Alarm Horn (under cover)
©2009 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
4
brkelectronics.com
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM2930
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement