BLF647P,112 datasheet

BLF647P,112 datasheet
BLF647P
Broadband power LDMOS transistor
Rev. 3 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
A 200 W LDMOS RF power transistor for broadcast transmitter and industrial
applications. The transistor is suitable for the frequency range HF to 1500 MHz. The
excellent ruggedness and broadband performance of this device makes it ideal for digital
applications.
Table 1.
Application information
RF performance at Th = 25 C in a common source test circuit.
PL(AV)
PL(M)
Gp
D
Test signal
f
VDS
IDq
IMD3
(MHz)
(V)
(A) (W)
(W)
(dB) (%) (dBc)
Pulsed, class-B
1300
32
0.1 -
200
18
70
-
CW, class-B
1300
32
0.1 200
-
18
70
-
2-tone, class-AB
f1 = 1299.95; f2 = 1300.05
32
0.7 75
-
19
48
33
1.2 Features and benefits







Integrated ESD protection
Excellent ruggedness
High power gain
High efficiency
Excellent reliability
Easy power control
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 Communication transmitter applications in the HF to 1500 MHz frequency range
 Industrial applications in the HF to 1500 MHz frequency range
BLF647P
Broadband power LDMOS transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
1
drain1
2
drain2
3
gate1
4
gate2
5
Simplified outline
1
Graphic symbol
1
2
3
source
5
5
[1]
3
4
4
2
sym117
[1]
Connected to flange
3. Ordering information
Table 3.
Ordering information
Type number
BLF647P
Package
Name
Description
Version
-
flanged LDMOST ceramic package; 2 mounting holes;
4 leads
SOT1121A
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VDS
Min
Max
Unit
drain-source voltage
-
65
V
VGS
gate-source voltage
0.5
+11
V
Tstg
storage temperature
65
+150
C
-
225
C
[1]
junction temperature
Tj
[1]
Conditions
Continuous use at maximum temperature will affect the reliability. For details refer to the on-line MTF
calculator.
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol Parameter
Rth(j-c)
[1]
BLF647P#3
Product data sheet
Conditions
thermal resistance from junction to case
Typ
Tcase = 80 C; PL = 200 W
[1]
Unit
0.34 K/W
Rth(j-c) is measured under RF conditions.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 14
BLF647P
Broadband power LDMOS transistor
6. Characteristics
Table 6.
DC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter
V(BR)DSS drain-source breakdown voltage
Conditions
Min
Typ
-
Max Unit
VGS = 0 V; ID = 1.1 mA
65
VGS(th)
gate-source threshold voltage
VDS = 28 V; ID = 110 mA
1.55 1.8
2.25 V
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
1.4
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 20 V
18.1 20
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
140
nA
gfs
forward transconductance
VDS = 20 V; ID = 5500 mA
-
7.6
-
S
RDS(on)
drain-source on-state resistance
VGS = VGS(th) + 3.75 V;
ID = 3.85 A
-
140
-
m
-
-
V
Table 7.
AC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol
Parameter
Conditions
Min Typ Max Unit
Ciss
input capacitance
VGS = 0 V; VDS = 32 V; f = 1 MHz
-
78
-
pF
Coss
output capacitance
VGS = 0 V; VDS = 32 V; f = 1 MHz
-
30
-
pF
Crs
feedback capacitance
VGS = 0 V; VDS = 32 V; f = 1 MHz
-
1.3
-
pF
Table 8.
RF characteristics
Test signal: CW; f = 1300 MHz; RF performance at VDS = 32 V; IDq = 100 mA; Tcase = 25C; unless
otherwise specified; in a class-AB production test circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL = 200 W
17
18
-
dB
D
drain efficiency
PL = 200 W
66
70
-
%
7. Test information
7.1 Ruggedness in class-AB operation
The BLF647P is capable of withstanding a load mismatch corresponding to
VSWR = 10 : 1 through all phases under the following conditions: VDS = 32 V;
f = 1300 MHz at rated load power.
BLF647P#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 14
BLF647P
Broadband power LDMOS transistor
7.2 Test circuit information
T2
+Vgs1
R3
C4
+Vds1
L4
L11
R1
C22
C13
C1
50 Ω
C19
C7
C3
C6
L2
C11
C12
L13
C16
L1
L3
C21
C17
C18
L14
C15
C8
C2
50 Ω
L15
C20
C14
R2
C5
L5
C23
L12
+Vds2
R4
+Vgs2
aaa-006003
T1
See Table 9 for a list of components.
Fig 1.
Schematic for class-AB production test circuit
60 mm
60 mm
R3
C22
C4
C1
C7
60 mm
C19
C6
C3
C11
C15
C12
C8
C2
C17
C13
R1
R2
C14
C21
C16
C18
C20
C5
C23
R4
6 mm
6 mm
29 mm
aaa-006004
See Table 9 for a list of components.
Fig 2.
BLF647P#3
Product data sheet
Component layout for class-AB production test circuit
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 14
BLF647P
Broadband power LDMOS transistor
Table 9.
List of components
Printed-Circuit Board (PCB): RF 35; r = 3.5 F/m; thickness = 0.765 mm; thickness copper plating = 35 m.
See Figure 1 and Figure 2.
BLF647P#3
Product data sheet
Component
Description
Value
Remarks
C1, C2, C3
multilayer ceramic chip capacitor
68 pF
C4, C5
multilayer ceramic chip capacitor
4.7 F, 50 V
C6
multilayer ceramic chip capacitor
2.4 pF
[2]
C7, C8
multilayer ceramic chip capacitor
4.7 pF
[1]
C11
multilayer ceramic chip capacitor
3.3 pF
[3]
C12
multilayer ceramic chip capacitor
2.4 pF
[3]
C13, C14
multilayer ceramic chip capacitor
3.3 pF
[3]
C15, C16
multilayer ceramic chip capacitor
1.2 pF
[3]
C17, C18
multilayer ceramic chip capacitor
4.7 F, 50 V
[1]
[3]
C19, C20, C21 multilayer ceramic chip capacitor
220 pF
C22, C23
electrolytic capacitor
470 F, 63 V
L1
microstrip
(L  W) 4 mm  1.7 mm
L2, L3
microstrip
(L  W) 22.5 mm  1.6 mm
L4, L5
microstrip
(L  W) 16.5 mm  15 mm
L11, L12
microstrip
(L  W) 8.5 mm  15 mm
L13, L14
microstrip
(L  W) 26 mm  4.2 mm
L15
microstrip
(L  W) 4 mm  1.7 mm
R1, R2
SMD resistor
5.6 
R3, R4
WIRE resistor
100 
T1
semi rigid coax
25 , 40 mm
UT-090C-25
T2
semi rigid coax
25 , 40 mm
UT-141C-25
[1]
American Technical Ceramics type 800A or capacitor of same quality.
[2]
American Technical Ceramics type 100A or capacitor of same quality.
[3]
American Technical Ceramics type 800B or capacitor of same quality.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
SMD1206
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 14
BLF647P
Broadband power LDMOS transistor
7.3 Graphical data
7.3.1 1-Tone CW
aaa-006005
19
Gp
(dB)
aaa-006006
58
80
ηD
(%)
PL
(dBm)
Gp
18
Ideal PL
56
60
(2)
17
54
40
ηD
(1)
PL
16
52
20
15
0
50
100
150
200
250
PL (W)
50
0
300
32
34
36
38
40
Pi (dBm)
VDS = 32 V; IDq = 100 mA; f = 1300 MHz.
VDS = 32 V; IDq = 100 mA; f = 1300 MHz.
(1) PL(1dB) = 53.4 dBm (217 W)
(2) PL(3dB) = 53.9 dBm (245 W)
Fig 3.
Power gain and drain efficiency as function of
output power; typical values
BLF647P#3
Product data sheet
Fig 4.
Output power as a function of input power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 14
BLF647P
Broadband power LDMOS transistor
aaa-006007
20
(7)
Gp
(dB)
aaa-006008
80
ηD
(%)
(6)
(5)
(4)
18
60
(3)
(2)
(1)
16
40
14
20
12
(1)
(2)
(3)
(4)
(5)
(6)
(7)
0
0
50
100
150
200
PL (W)
250
0
VDS = 32 V; f = 1300 MHz.
50
(1) IDq = 50 mA
(2) IDq = 100 mA
(2) IDq = 100 mA
(3) IDq = 200 mA
(3) IDq = 200 mA
(4) IDq = 300 mA
(4) IDq = 300 mA
(5) IDq = 700 mA
(5) IDq = 700 mA
(6) IDq = 1000 mA
(6) IDq = 1000 mA
(7) IDq = 1200 mA
Product data sheet
200
PL (W)
250
(7) IDq = 1200 mA
Power gain as a function of output power;
typical values
BLF647P#3
150
VDS = 32 V; f = 1300 MHz.
(1) IDq = 50 mA
Fig 5.
100
Fig 6.
Drain efficiency as a function of output power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 14
BLF647P
Broadband power LDMOS transistor
aaa-006009
20
aaa-006010
80
Gp
(dB)
ηD
(%)
(2)
(3)
(1)
(4)
18
60
16
40
(3)
(5)
(1)
(2)
(4)
14
20
(5)
12
0
0
50
100
150
200
PL (W)
250
0
50
150
200
PL (W)
250
IDq = 100 mA; f = 1300 MHz.
IDq = 100 mA; f = 1300 MHz.
(1) VDS = 32 V
(1) VDS = 32 V
(2) VDS = 28 V
(2) VDS = 28 V
(3) VDS = 25 V
(3) VDS = 25 V
(4) VDS = 20 V
(4) VDS = 20 V
(5) VDS = 15 V
(5) VDS = 15 V
Fig 7.
100
Power gain as a function of output power;
typical values
Fig 8.
Drain efficiency as a function of output power;
typical values
7.3.2 1-Tone pulsed
aaa-006011
19
80
Gp
(dB)
ηD
(%)
Gp
18
60
17
40
ηD
16
20
15
0
50
100
150
200
250
PL (W)
0
300
VDS = 32 V;IDq = 100 mA; f = 1300 MHz; tp = 100 s;  = 20%.
Fig 9.
BLF647P#3
Product data sheet
Power gain and drain efficiency as function of output power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 14
BLF647P
Broadband power LDMOS transistor
7.3.3 2-Tone CW
aaa-006012
20
80
Gp
(dB)
Gp
19
aaa-006013
0
ηD
(%)
60
IMD3
(dBc)
-20
(1)
(2)
(3)
18
40
-40
(4)
ηD
17
20
16
0
25
50
75
100
125
PL(AV) (W)
0
150
VDS = 50 V; IDq = 700 mA; f1 = 1299.95 MHz;
f2 = 1300.05 MHz.
-60
(5)
-80
0
25
50
75
100
125
PL(AV) (W)
150
VDS = 32 V; f1 = 1299.95 MHz; f2 = 1300.05 MHz.
(1) IDq = 100 mA
(2) IDq = 400 mA
(3) IDq = 700 mA
(4) IDq = 1000 mA
(5) IDq = 1200 mA
Fig 10. Power gain and drain efficiency as function of
average output power; typical values
BLF647P#3
Product data sheet
Fig 11. Third order intermodulation distortion as a
function of average output power; typical
values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 14
BLF647P
Broadband power LDMOS transistor
8. Package outline
Flanged LDMOST ceramic package; 2 mounting holes; 4 leads
SOT1121A
D
A
F
D1
U1
B
q
C
H1
c
1
2
p
U2
H
E1
E
5
A
w1
3
A
B
4
b
w2
C
Q
e
0
5
Dimensions
Unit(1)
mm
10 mm
scale
A
max 4.75
nom
min 3.45
b
c
D
D1
3.94
0.18 20.02 19.96
3.68
0.10 19.61 19.66
E
e
E1
F
H
H1
p
Q(2)
9.53 9.53 1.14 19.94 12.83 3.38
1.70
9.27 9.27 0.89 18.92 12.57 3.12
1.45
q
U1
U2
max 0.187 0.155 0.007 0.788 0.786
0.375 0.375 0.045 0.785 0.505 0.133 0.067
inches nom
0.35
min 0.136 0.145 0.004 0.772 0.774
0.365 0.365 0.035 0.745 0.495 0.123 0.057
33.91 9.65
1.345 0.39
0.01 0.02
1.1
1.335 0.38
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. dimension is measured 0.030 inch (0.76 mm) from the body.
Outline
version
References
IEC
JEDEC
JEITA
w2
0.25 0.51
27.94
8.89
w1
34.16 9.91
sot1121a_po
European
projection
Issue date
09-10-12
10-02-02
SOT1121A
Fig 12. Package outline SOT1121A
BLF647P#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 14
BLF647P
Broadband power LDMOS transistor
9. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
10. Abbreviations
Table 10.
Abbreviations
Acronym
Description
CW
Continuous Waveform
ESD
ElectroStatic Discharge
HF
High Frequency
LDMOS
Laterally Diffused Metal Oxide Semiconductor
LDMOST
Laterally Diffused Metal-Oxide Semiconductor Transistor
VSWR
Voltage Standing-Wave Ratio
11. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLF647P#3
20150901
Product data sheet
-
BLF647P_BLF647PS v.2
Modifications:
•
The format of this document has been redesigned to comply with the new identity
guidelines of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLF647P v.2
20130412
Product data sheet
-
BLF647P_BLF647PS v.1
BLF647P_BLF647PS v.1
20120803
Objective data sheet
-
-
BLF647P#3
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 14
BLF647P
Broadband power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLF647P#3
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
12 of 14
BLF647P
Broadband power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
13. Contact information
For more information, please visit:
http://www.ampleon.com
BLF647P#3
Product data sheet
For sales office addresses, please visit:
http://www.ampleon.com/sales
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
13 of 14
BLF647P
Broadband power LDMOS transistor
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
7.3.1
7.3.2
7.3.3
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 2
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 3
Test circuit information . . . . . . . . . . . . . . . . . . . 4
Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 6
1-Tone CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1-Tone pulsed . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2-Tone CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Handling information. . . . . . . . . . . . . . . . . . . . 11
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLF647P#3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement