3 18-12

3 18-12
3 18-12
1
3 18-12
SUBJECT
DATE
Installation of the Supply Fuel Temperature Sensor
March 2012
Additions, Revisions, or Updates
Publication Number / Title
DDC-SVC-MAN-0084
Platform
Section Title
EPA07/10
Installation of the Supply
Torque has changed on the sensor bolts to 30-35 N·m (22-25 lb·ft).
DD Platform Fuel Temperature Sensor
All information subject to change without notice.
3 18-12
Change
Copyright © 2012 DETROIT DIESEL CORPORATION
3
2 Installation of the Supply Fuel Temperature Sensor
2
Installation of the Supply Fuel Temperature Sensor
Install as follows:
1. Install the sensor and new seal on the fuel filter module; tighten the sensor using the appropriate wrench on the hex end
of the sensor. Torque sensor to 30-35 N·m (22-25 lb·ft).
2. Install the harness connector onto the sensor and push the gray tab to the up position.
3. Seat the secondary lock on the electrical connector.
4. Prime the fuel system. Refer to section "Priming of the Fuel System Using ESOC 350 Fuel Priming Pump" .
4
All information subject to change without notice.
Copyright © 2012 DETROIT DIESEL CORPORATION
3 18-12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement