Civils & Infrastructure Product Guide CPS1 FEBRUARY 2016

Civils & Infrastructure Product Guide CPS1 FEBRUARY 2016
CPS1
FEBRUARY 2016
Civils & Infrastructure
Product Guide
www.polypipe.com/civils
Polypipe
Welcome to Polypipe
At Polypipe, conceiving, designing, manufacturing and delivering the most advanced products and systems
is more than just an occupation. We see it as our passion. Everything we do has always been based around
a few simple beliefs: Quality always beats quantity. Products are nothing without service and support.
Sustainability isn’t just a ‘green’ word and working with our customers is much better than simply
supplying them.
How to use this brochure
This product guide has been designed to provide you with quick, easy access to information on all of our Polypipe products
and systems. A clear colour-coded navigation divides the guide into sections, each with its own introduction, followed by
sub-contents segments that break down products by application and function.
Contents
SECTION 1
Polypipe Civils
Overview
60 - 61
Technical services and support
6-7
The Permavoid system
62 - 63
Our markets
8-9
Permavoid applications
64 - 65
66 - 69
Plastics vs legacy materials
10 - 11
Permavoid system components
The growing importance of SuDS
12 - 13
Permavoid 85 & 150
70
Legislation and regulations
14
Permachannel
71
Process integration
15
Permavoid Biomat
72
The complete picture for Water Management
and Civils and Infrastructure projects
16 - 17
Drainage and SuDS – selection and design
18 - 19
Ridgidrain
Overview
20 - 21
Permafilter Geotextile
73
Polystorm range
74 - 75
An 8 step guide to a total Polystorm system
76 - 79
Polystorm Lite
80
Polystorm-R
81
Ridgidrain pipes
22
Polystorm
82
Ridgidrain end caps, seals & couplings
23
Polystorm Xtra
83
24 - 26
Polystorm Access
84
27
Polystorm Inspect
Ridgidrain bends & junctions
Ridgidrain reducers, spigots & sockets
Gullies
85
28 - 29
Permavoid case studies
86 - 87
Linflex Fin and Narrow Filter Drains
30
Polystorm case studies
88 - 89
Ridgitreat
31
SECTION 6
Case studies
SECTION 3
32 - 33
Ridgistorm-XL
90 - 91
Rainstream
34 - 35
SECTION 7
Ridgistorm-XL applications
36 - 39
Overview
Ridgistorm-XL piping system
40 - 41
Landcoil system
Ridgistorm-XL jointing options
42 - 43
SECTION 8
Case studies
44 - 45
Fabrications
Overview
Rainwater harvesting
Overview
Overview
SECTION 4
2
Geocellular
4-5
SECTION 2
Our products offer unrivalled choice and quality. With water management, sewerage and cable protection
systems, we offer the industry’s widest choice of plastic piping and geocellular solutions.
SECTION 5
Company Overview
92 - 93
Land drainage
94 - 95
96 - 97
Sewer system
Overview
98 - 99
Polysewer – pipes, fittings and accessories
100 - 104
46 - 47
Sewer Saddles and Ridgisewer pipe
105
RIDGISTORMCheck Vortex Flow Control Chamber
48
Ridgisewer – fittings and accessories
106 - 109
RIDGISTORMCheck Orifice Plate Flow Control Chamber
49
SECTION 9
RIDGISTORMControl Penstock and Valve Chamber
50
RIDGISTORMAccess Manholes
51
RIDGISTORMSeparate Silt Traps
52
RIDGISTORMSeparate Catchpits
53
RIDGISTORMSeparate Weir and Baffle Chamber
54
RIDGISTORMSeparate Filter Chamber
55
RIDGISTORM-X4 Stormwater Treatment System
56
Ridgistorm-XL Lifting Points
57
Ridgistorm-XL Low Flow Channel
58
Ridgistorm-XL Chamber Accessories
59
Cable protection
Overview
110 - 111
Power – Class 1
112 - 113
Power – Class 2
114
Power – Class 3
115
Ridgicoil power and power accessories
116 - 117
General purpose power
118 - 119
Motorway Comms
120 - 121
Lighting
122 - 125
Utilities
126 - 129
Installation advice
SECTION 10
130 - 131
The company
Overview
132 - 133
Serving commercial, industrial, retail, infrastructure, residential and utilities markets, our commitment to innovative product solutions
Innovation and research
134 - 135
is unmatched. Our focus on continued investment in people, plant and product research helps to meet and exceed standards for
Polypipe project and technical support
136 - 137
performance and reliability in the UK market.
Online technical resources
138 - 139
Enabling sustainable building technology
140
Literature
141
3
COMPANY
OVERVIEW
SECTION 1
www.polypipe.com/civils
Polypipe Civils
TECHNICAL
SERVICES AND
SUPPORT
OUR
MARKETS
Company overview
PLASTICS
vs LEGACY
MATERIAL
Polypipe is the UK market leader in the design, development and manufacture of plastic
piping systems for civils and infrastructure projects.
THE GROWING
IMPORTANCE
OF SUDS
LEGISLATION
& REGULATIONS
PROCESS
INTEGRATION
THE COMPLETE
PICTURE
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
Civils and Infrastructure
Water management solutions
At Polypipe we provide advanced holistic solutions and
The demand for comprehensive water management solutions
unrivalled technical support to help our customers meet today’s
has never been more pressing. Extreme rainfall events, driven
construction challenges. With our civil engineering expertise,
by climate change, are becoming more frequent. In response,
we lead the way in replacing traditional materials like concrete
the Government has introduced new legislation. The Floods
or clay with high performance, engineered, thermoplastic
and Water Management Act 2010 sets out new ways to manage
solutions for a variety of project types. Whether it’s a highway
surface water via sustainable drainage systems (SuDS).
scheme such as the M25 road widening, an airport like
We have responded to this challenging market by developing
Heathrow Terminal 5 or a capital works scheme such as Gulls
SECTION 1
Polypipe Civils
The company overview
4-5
Technical services and support
6-7
intelligently engineered, holistic water management solutions.
Our markets
8-9
Way in the Wirral for Welsh Water, we offer a comprehensive
These include geocellular and large diameter pipe systems
range of solutions, including surface water drainage, sewerage
for retention, attenuation and infiltration applications, surface
Plastics vs legacy materials
10 - 11
systems, cable protection and water management solutions.
water treatment products and rainwater re-use solutions, all
The growing importance of SuDS
12 - 13
supported by in-house Design, Technical, Fabrication and
Legislation and regulations
14
Process integration
15
Product Support Teams.
4
Contents
The complete picture
16 - 17
Drainage and SuDS – Selection and design
18 - 19
5
COMPANY
OVERVIEW
SECTION 1
www.polypipe.com/civils
Polypipe Civils
Technical services and support
Our industry expertise and knowledgeable Technical Solutions Team allow us
to provide an unrivalled level of technical support for your project.
TECHNICAL
SERVICES AND
SUPPORT
OUR
MARKETS
PLASTICS
vs LEGACY
MATERIAL
THE GROWING
IMPORTANCE
OF SUDS
LEGISLATION
& REGULATIONS
PROCESS
INTEGRATION
THE COMPLETE
PICTURE
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
We work closely with our customers to help guide them through current legislation and complex
building regulations. We also assist in selecting the right product ranges to meet with individual project
requirements and can help develop a fully engineered system for more challenging project needs.
The calibre of our people
Installation guidance
We place a huge emphasis on the knowledge and experience
Providing guidance at the critical installation stage,
of the people we employ, offering unparalleled customer
co-ordinating deliveries and ensuring the most cost
service to ensure your project receives the best possible
and time efficient pathways to completion.
solution. Our team includes fully qualified design engineers
who offer detailed specification guidance and both fabrication
and installation specialists. We are also members of influential
Bespoke fabrication
bodies such as the British Plastics Federation and Construction
We are unique in having our own in-house fabrication unit.
Products Association and work closely with organisations such
In the 2600m2 facility, our skilled and highly experienced
as DEFRA, CIRIA and Constructing Excellence, ensuring we are
technicians deliver modular engineered drainage and water
always closely involved with industry drivers.
management systems. These are provided ready-to-install,
maximising the benefits of pre-fabrication, for ease of
Design
delivery and reduced installation time on-site.
From the outset, our Design Team bring their technical
Guidance and support
expertise and experience to bear, providing assistance with
hydraulic, structural and flotation calculations supported
We are here to offer you the support you need at every stage
by system CAD designs and specifications.
of your project. Our extensive product literature, including
product datasheets and technical manuals, are readily available
from our website www.polypipe.com/toolbox or you can
call our Technical Team for a rapid response to all enquiries
on +44 (0) 1509 615100.
6
7
COMPANY
OVERVIEW
SECTION 1
www.polypipe.com/civils
Polypipe Civils
TECHNICAL
SERVICES AND
SUPPORT
OUR
MARKETS
Our markets
PLASTICS
vs LEGACY
MATERIAL
At Polypipe, we pride ourselves on the versatility of our product range, providing systems
and solutions to the commercial, industrial, retail, infrastructure, residential and utilities market sectors.
THE GROWING
IMPORTANCE
OF SUDS
LEGISLATION
& REGULATIONS
PROCESS
INTEGRATION
THE COMPLETE
PICTURE
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
Commercial and Public
Power
Residential
Ports and Harbours
We provide complete solutions for a range of commercial,
Polypipe is the UK’s leading supplier to the power utilities
We have a range of adoptable drainage, sewer
We offer a range of drainage, water management
public, industrial and retail projects with product solutions
industry and our products are favoured by Distribution
and water management solutions to suit any size
and cable protection systems engineered for the
engineered for large commercial buildings, schools, hospitals,
Network Operations (DNO) companies. Our range includes
of development. Our Polysewer, Ridgisewer and
requirements of airports, ports and harbours.
car parks, shopping centres and industrial developments.
cable protection that complies with ENATS 12-24 Classes
Ridgistorm-XL piping systems offer a water company
Whether its capturing water, storing it, reusing it,
We have innovative products and systems for every project –
1, 2 and 3 as well as above ground solutions, such as Cable
approved solution for Section 104 agreements.
or draining it away, all our products have been
from below ground ventilation, sewer and drainage systems
Guards and Hockey Sticks.
Whilst our Permavoid and Polystorm geocellular
manufactured with a high degree of durability,
systems extend the choice for water management
versatility and strength – particularly for coping
further and can be used in conjunction with soft
with increased traffic loading as well as carrying away
SuDS to enhance the biodiversity of a development.
high volumes of standing water on airport tarmacs.
Water
Agriculture
to managing surface water, storing and reusing it as an
alternative to mains supply.
8
Roads and Highways
Rail
We offer a full range of both surface water drainage
Our trackside and station solutions for surface water
conforming to Highways England standards and
drainage, water management and cable protection have
specifications to meet the needs of motorways and
We offer a complete range of chemical resistant
Our Landcoil land drainage pipe range is designed
been installed in a number of important rail infrastructure
highway projects. Our Ridgidrain surface water drainage
piping systems to meet the requirements of the water
to aid the successful management of land water.
projects such as London Bridge Station. Our products
system is quick to install due to being lighter in weight
industry, from smaller sized pipes such as Polysewer
In addition, Ridgistorm-XL, Ridgidrain and Ridgitreat
and systems are designed to ensure a quick installation to
and available in longer lengths, compared to concrete
and Ridgisewer, to large diameter Ridgistorm-XL.
can be used in trench and French drain applications
minimise track closures, improve Health and Safety during
alternatives, speeding up installation to reduce road/lane
Our systems are perfectly suited to surface water,
to collect, treat and infiltrate water or take it to
handling and installation and where possible, they carry
closures. Our Motorway Comms cable protection systems
sewer and combined sewer applications and are fully
another area.
Network Rail PADS approval.
are also quick and easy to install and come in longer
compliant with Sewers for Adoption, 7th Edition
lengths to minimise joints and the risk of water ingress.
and are accepted for use by all UK water companies.
and cable protection BBA HAPAS approved systems,
9
COMPANY
OVERVIEW
SECTION 1
www.polypipe.com/civils
Polypipe Civils
TECHNICAL
SERVICES AND
SUPPORT
OUR
MARKETS
Plastics vs legacy materials
PLASTICS
vs LEGACY
MATERIAL
MATERIAL
Using engineered plastics rather than traditional materials such as concrete or clay can lead
to innovative project solutions that offer transportation, installation and cost-saving benefits.
THE GROWING
IMPORTANCE
OF SUDS
Plastic pipe key benefits
• Lower density weight than legacy materials,
LEGISLATION
& REGULATIONS
lowering transport and installation costs
PROCESS
INTEGRATION
• Lower modulus means flexibility and reduced
risk of breakage
• Strong and lighter weight providing excellent
THE COMPLETE
PICTURE
Health and Safety benefits
• Reduced leakage due to longer pipe lengths
and high-integrity joint systems
• Can be manufactured from recycled materials
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
• Proven second life - 100% recyclable
• Ability to use off-site construction techniques
to minimise cost and time on-site
• Non-corrosive
• Chemical resistant
On-site benefits
Performance benefits
Environmental benefits
As thermoplastic pipes are inherently lighter in weight
Typically, concrete pipes are usually supplied in 2.5m lengths.
Thermoplastics are an integral part of sustainable
Not only will a reduced number of deliveries provide
than legacy materials, they are quicker and easier to
However, thermoplastic pipes can be supplied in lengths all the
developments. Lighter and more robust than most legacy
environmental benefits, but the reduction in vehicle
install. In many circumstances, lighter plant is required
way up to 12m. Using these longer pipes ensures fewer joints are
materials, they typically weigh up to 94% less than their
movements on-site also ensures that the associated
to install these products, providing cost savings on-site.
required along the pipeline, minimising any potential leakage
concrete equivalents. Due to this lighter weight nature,
Health and Safety risks are reduced. We produce
Further cost savings are achieved as lighter plant removes
points. In addition, these pipes have integral sockets, excellent
thermoplastic pipes and fittings help to reduce energy use
pipes and fittings utilising recycled materials where
the need for temporary access works and prevents
jointing systems and are flexible, meaning they are more tolerant
and therefore greenhouse gas emissions. Thermoplastic
appropriate and all products are 100% recyclable at
damage to road surfaces. Thermoplastic pipes can be
to movement of the surrounding soil than legacy pipes. This is a
pipes can also be transported in greater volumes than
the end of their useful life.
70% cheaper to transport than equivalent concrete
key factor when considering the Water Framework Directive (WFD)
their concrete equivalents. For example, 1km of 450mm
pipes due to their longer lengths and lighter weight.
and Groundwater Directive legislation, which cites a reduction in
thermoplastic drainage pipes from Polypipe only requires
Their lighter weight nature also provides excellent
diffuse pollution as a critical objective.
three deliveries. Compare this to the twelve deliveries to
Health and Safety benefits when considering the storage
site that concrete pipes would require, then the cost
and handling of pipes, making them beneficial to
savings become apparent.
Construction Design Management (CDM) compliance.
10
11
COMPANY
OVERVIEW
SECTION 1
www.polypipe.com/civils
Polypipe Civils
The growing importance of SuDS
‘Making Space for Water’ is an integrated, forward-thinking strategy for managing future flood
risk in England, first published in 2004.
Among its many recommendations is the adoption of a ‘joined-up’ approach to drainage management
in high-risk urban areas and the widespread use of sustainable drainage systems (SuDS) to control
the rate at which rainwater runs off paved areas and into sewer networks and rivers.
Government planning policy has defined the need for sustainable drainage systems (SuDS)
to ensure that flood risk is taken into account during all stages of the planning process.
CIRIA (SuDS Manual)
The SuDS Manual provides guidance on all aspects of the
design, construction, operation and maintenance of SuDS.
In particular, it places a real emphasis on the use of source
control techniques and requires designers to consider
pollution removal.
Urbanisation has led to increasing negative impacts
on the environment, in particular pollution. Depending
on the land use, the following typical surface pollutants
can be found in surface water run-off:
The SuDS Manual defines that a sustainable drainage
system should consider certain basic requirements,
including:
• Sediments
• Run-off from a developed area should be no
greater than the run-off prior to development
• Fertilisers and pesticides
• Run-off from a developed area should not result
in any down-grading of downstream watercourses
or habitat
• Animal wastes
• Consideration should be given at the development
feasibility stage to water resource management and
control in the developed area
• Run-off should replicate as far as possible the natural
response of the site to rainfall
• Hydrocarbons and oils
• Heavy metals
TECHNICAL
SERVICES AND
SUPPORT
OUR
MARKETS
PLASTICS
vs LEGACY
MATERIAL
THE GROWING
IMPORTANCE
OF SUDS
SuDS
LEGISLATION
& REGULATIONS
PROCESS
INTEGRATION
• Salts
THE COMPLETE
PICTURE
• Pathogens
Traditionally, pollutants are collected from impermeable
surfaces into the drainage systems and treated
downstream via large, deep, in-line separators that
are typically designed to treat the first ‘flush’ only.
Emulsified oils and hydrocarbons can still be discharged
downstream, the discharged oil and hydrocarbons
constitutes a major pollution source and is a serious
threat to groundwater sources.
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
The SuDS Management Train
This is a staged design concept used in sustainable drainage systems (SuDS) which controls volume and quality
of surface water run-off.
The challenge each developer faces, on both greenfield and brownfield developments, is what to do with the excess run-off
generated by the development which has to be retained in and around the site. BS8533:2011, ‘Assessing and Managing Flood
Risk in Development Code of Practice’, has been created to help designers analyse flood risk and to guide the selection of
appropriate flood risk management solutions.
Soft SuDS alone may not provide sufficient storage on certain sites due to space constraints, particularly driven by the housing
density requirements in PPS3:Housing. Our systems can help address these challenges, providing an effective controlled
retention, attenuation or infiltration system to suit site specific requirements.
12
13
COMPANY
OVERVIEW
SECTION 1
www.polypipe.com/civils
Polypipe Civils
OUR
MARKETS
Legislation and regulations
Process integration
We understand how important it is to keep up to date with legislation. That is why our
advice and system selection is informed by the very latest regulations and standards.
BS EN 782:2008
developments and redevelopments) that deliver effective
BS EN 782:2008 takes a more integrated view of designing
possible, while contributing towards the delivery of relevant
sewer systems in the context of the wider urban drainage
environmental, sustainability and urban design planning
objectives for the site and local area.
surface water flood risk management as sustainably as
Water Framework Directive
Lead Local Flood Authorities
system and water environment. It helps engineers understand
The Water Framework Directive (WFD) is a piece of EU legislation
The Flood and Water Management Act (FWMA) 2010 requires
management. The National Annex provides information on
to improve water quality in watercourses and coastal areas. It
the Lead Local Flood Authority (LLFA) to be responsible for
how to incorporate BS EN 782:2008 practices within the UK.
identifies the treatment of pollution at source as one of the most
co-ordinating flood risk management within its area. They have
effective ways of reducing pollution and improving water quality.
the responsibility for managing the risk of flooding from surface
Our geocellular solutions can meet that challenge by integrating
water, groundwater and ordinary watercourses and for
a number of surface water treatment and water management
developing, maintaining and applying a strategy for local flood
control systems into your attenuation and soakaway structures
risk management. LLFA’s are also responsible for maintaining
at source.
a register of significant flood risk assets.
developments to implement sustainable drainage systems (SuDS)
on all new developments using natural and proprietary features
in place of conventional drainage, to reduce surface water
run-off, mitigate flood risk and improve water quality.
Building Regulations
are all examples of this. Rivers and watercourses are not always
PROCESS
INTEGRATION
THE COMPLETE
PICTURE
Planning Policy
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
We can provide help and
support at every stage of
the planning process.
Local surface water management, flood risk management and green
infrastructure policies.
control surface water run-off close to where it falls and mimic
natural drainage as closely as possible to:
Development
masterplan
• Combine water management with green space with benefits
for amenity, recreation and wildlife
Confirmation of
approval and
adoption process
Information on how this should be applied is provided in the
DEFRA non-statutory technical standards for sustainable drainage
systems (SuDS).
for infiltration. Brownfield sites, sites with contaminated ground,
high water tables, poor percolation and with natural aquifiers
The diagram below demonstrates pertinent links between the development planning process and the drainage system
design process, emphasising the involvement of stakeholders throughout.
sustainable development. The systems should be designed to
• Remove pollutants from urban run-off at source
Many developments are being built on land that is not suitable
from surface water run-off.
LEGISLATION
& REGULATIONS
consistent drainage criteria and principles (for new
sustainable manner and has a presumption in favour of
• Reduce the causes and impacts of flooding
3. Direct to sewers
on the sustainable management of flood risks arising
The NPPF requires that development is undertaken in a
to be either stored in a tank or discharged in the following order:
2. Rivers and watercourses
developments and redevelopment sites, focusing
to support:
for new developments in accordance with SuDS principles.
Building Regulations Approved Document H3 requires rainwater
1. Soakaway or other infiltration
of surface water management systems for new
for development sites. The standard has been developed
incorporate effective and robust surface water drainage systems
National Planning Policy Framework
(NPPF)
THE GROWING
IMPORTANCE
OF SUDS
Local Planning Authorities (LPAs)
in close proximity/reasonable construction distance from the
When determining planning applications, LPAs should ensure
site, resulting in a very large number of sites still having to
that any new or redevelopment avoids flood risk to people
utilise mains sewer connections as their only viable means
and property, does not increase flood risk elsewhere and
of stormwater discharge.
mitigates any flood risk taking into account of the impacts
of climate change.
The LPA will be required to consult with the LLFA as a statutory
Development
concept
Drainage
concept
Outline drainage
design
Flood risk
assessment/
drainage
assessment
Data collation
and investigations
Outline planning
permission
Detailed drainage
design, drainage
impact assessment
consultee on major developments with surface water drainage
requirements along with other statutory and non-statutory
consultees as required.
Full planning
consent
Drainage system approvals
and construction consents
Detailed data
and modelling
NOTE: The need for the steps given
in colour would depend on the nature
and /or scale of the development and type
of planning application and is determined
by agreement with the planning
authority and drainage approval body.
Ref:- British Standard BS 8582:2013 page 8.
Outline planning stage
management. As part of the Act, Schedule 3 requires new
This Code of Practice is for surface water management
the planning, design, construction and maintenance
Pre-application stage
in 2010 with the aim to mitigate flood risk and improve water
flood risk strategy focused on local issues. The strategy should
meet the criteria and principles referred to above.
In addition, this standard gives recommendations on
• Planners and drainage approval bodies: In setting
PLASTICS
vs LEGACY
MATERIAL
robust surface water management systems, that
Full planning stage
The Flood and Water Management Act (FWMA) came into effect
It is a requirement under the FWMA that LLFA’s develop a local
• Designers: In planning and implementing safe,
BS 8582:2013
Stakeholder consultation
Flood and Water Management Act
2010 (amended 2012)
and implement integrated urban drainage systems and
TECHNICAL
SERVICES AND
SUPPORT
Building Regulations approval
CSH certification (SUR 1)
Drainage system adoption
14
15
COMPANY
OVERVIEW
SECTION 1
www.polypipe.com/civils
Polypipe Civils
TECHNICAL
SERVICES AND
SUPPORT
OUR
MARKETS
The complete picture for water management
and civils and infrastructure projects
We offer the broadest range of plastic piping systems available in the UK. Our complete
and comprehensive systems enable a one-stop approach to specification and technical support.
Covering everything from surface water management, treatment, attenuation and
infiltration to sewerage and cable protection systems, our range takes into account
the complete picture.
PLASTICS
vs LEGACY
MATERIAL
THE GROWING
IMPORTANCE
OF SUDS
LEGISLATION
& REGULATIONS
4
PROCESS
INTEGRATION
4
2
1
4
THE COMPLETE
PICTURE
13
8
10
1
9
2
3
7
3
14
5
11
1
6
12
2
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
4
5
6
7
Permavoid
Polystorm
Ridgistorm-XL
Rainstream
Ridgidrain
Polysewer
Ridgisewer
A sub-base replacement
A geocellular system used
An engineered, large
Rainwater reuse systems
A high strength HDPE
A PVCu sewer pipe
A highly durable and versatile
geocellular water
for retention, attenuation
diameter pipe solution for
for both commercial and
surface water drainage
system available in sizes
polypropylene sewer pipe
management system for
and infiltration at
surface water, foul water and
residential applications.
piping system, used for
150-300mm.
system, available in sizes
use at shallower depths.
deeper depths.
combined sewer applications.
surface and sub-surface
400-600mm.
drainage applications.
8
16
9
10
11
12
13
14
RIDGISTORMControl
Chambers
RIDGISTORMAccess
Manholes
RIDGISTORM-X4
Landcoil
Cable protection
Advanced 4 stage
A land drainage system
Protects cables and conduits
water treatment system.
for the management
carrying power, motorway
of excess land water.
communications, lighting and
RIDGISTORMCheck
Chambers
RIDGISTORMSeparate
Flow control chambers
and silt traps to separate silt
A range of pre-fabricated
Pre-fabricated manholes
available with pre-fabricated
and other particles before
chambers with flow
to provide easy access into
Vortex Flow Controllers
entering a drainage system
control components such
a pipeline.
and Orifice Plates.
or the environment.
as Gate Valves, Flap Valves
A range of upstream catchpits
and Penstocks.
utilities in almost every application.
17
COMPANY
OVERVIEW
SECTION 1
Polypipe Civils
www.polypipe.com/civils
TECHNICAL
SERVICES AND
SUPPORT
OUR
MARKETS
Drainage and SuDS - selection and design
The right system for
the right application
We manufacture modular sustainable
drainage products and systems to
PLASTICS
vs LEGACY
MATERIAL
THE GROWING
IMPORTANCE
OF SUDS
suit site specific requirements. From
Permavoid for rainwater interception
and source control at shallower depths
through to larger and deeper
attenuation, infiltration and carrier
LEGISLATION
& REGULATIONS
PROCESS
INTEGRATION
systems for adoptable and non-adoptable
stormwater systems.
THE COMPLETE
PICTURE
This chart demonstrates all of our water
management solutions available, to help
determine which option best suits your
particular site requirements.
18
DRAINAGE
AND SUDS –
SELECTION
AND DESIGN
19
RIDGIDRAIN
OVERVIEW
SECTION 2
www.polypipe.com/ridgidrain
Ridgidrain
RIDGIDRAIN
PIPES, END CAPS,
SEALS &
COUPLINGS
RIDGIDRAIN
BENDS &
JUNCTIONS
Ridgidrain overview
RIDGIDRAIN
JUNCTIONS,
REDUCERS,
SPIGOTS &
SOCKETS
Offering increased sustainability without compromise in performance, Ridgidrain is suitable for use
in civils and infrastructure non-pressurised surface and sub-surface drainage applications.
THE GROWING
IMPORTANCE
GULLIES
OF SUDS
Polypipe Drainage Pipework Applications
Ridgidrain key benefits
FOUL/COMBINED
SYSTEM
STORMWATER/SURFACE WATER SYSTEM
LINFLEX FIN
AND NARROW
FILTER DRAINS
• Full range of pipes and fittings from 100-600mm
• BBA and BBA HAPAS approved
RIDGITREAT
• Network Rail Parts and Drawing Systems (PADS) approved
MANUAL OF
CONTRACT
DOCUMENTS FOR
HIGHWAY WORKS
SPECIFICATION
(MCHW)
WATER COMPANY
ADOPTED/
SPECIFICATION
• Manufactured to SN6 with a predicted design life in excess of 60 years
RIDGIDRAIN
CASE STUDIES
• Non-pressure and leak tested up to 100mm/wg (0.01 bar)
• Smooth bore giving excellent hydraulic properties
SOLID WALL
BS EN 1401
NO
• Longer lengths so fewer joints for improved resilience to leakage
NO
• Light weight for reduced transport, installation costs and improved
Health and Safety benefits
POLYSEWER
YES
RIDGIDRAIN
RIDGIDRAIN
• Structured wall design for high ring stiffness and strength
WATER COMPANY
ADOPTED/
SPECIFICATION
YES
• Up to 94% lighter than concrete means fewer deliveries to site
SOLID WALL
BS EN 1401
RIDGISEWER
RIDGISTORM-XL
RIDGISTORM-XL
• Reduces CO2 consumed in production, transportation and on-site handling
• Manufactured from 100% recycled material
POLYSEWER
• Resistant to ground movement and differential settlement
• Integrally socketed in diameters 400-600mm for ease of installation
RIDGISEWER
RIDGISTORM-XL
• Unperforated, half perforated and full perforated options available
• Ridgitrack is available for higher loading applications
RIDGISTORM-XL
High strength performance
Applications
The very first twinwall surface drainage system in the UK with Highways
•
•
•
•
•
•
•
•
Authority Product Approval Scheme (HAPAS) status, Ridgidrain has a high
strength to weight ratio and flexibility to resist high traffic loads. It has
a low friction inner wall for improved hydraulics and comes in 6m lengths to
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BRITISH
BBA
BRITISH
BOARD
OF
OF and risk of leakage. Made from 100%
significantly
reduce
the number of BOARD
joints
AGRÉMENT
AGRÉMENT
recycled high strength HDPE, using a structured wall design to produce a robust
CERTIFICATE No. 00/R121
CERTIFICATE No. 00/R121 & 00/3678
yet flexible pipe, Ridgidrain has a high resistance to the most common chemicals.
It offers excellent performance, meaning you get all the benefits of sustainability,
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
strength and lower weight without compromising on long term effectiveness.
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
BRITISH
BOARD OF
AGRÉMENT
Highways
Rail
Airports
Residential
Commercial
Industrial
Agricultural
Education
Contents
SECTION 2
Ridgidrain
Ridgidrain overview
Ridgidrain pipes
22
Ridgidrain end caps, seals & couplings
23
Ridgidrain bends & junctions
Ridgidrain reducers, spigots & sockets
CERTIFICATE No. 03/3979
Gullies
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 02/3923
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
(BBA and HAPAS Approved)
(Network Rail Parts and Drawing
Systems (PADS) Approved)
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
20 - 21
24 - 26
27
28 - 29
Linflex Fin and Narrow Filter Drains
30
Ridgitreat
31
Case studies
32 - 33
Certificate Number: PA05/05460
CERTIFICATE No. 00/R121 & 3678
20
21
BRITISH
BRITISH
BRITISH
BOARD OF
RIDGIDRAIN
OVERVIEW
SECTION 2
RIDGIDRAIN
BENDS &
JUNCTIONS
Nominal
size mm
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BBA
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
A
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
PA05/05460
BBA
BRITISH
BOARD OF
AGRÉMENT
CATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CATE No. 90/RO49
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
Option
Weight
kgm-1
Pack qty
Code
Pack qty
EC1059INT
10
100
EC100
10
RD100X6PE*
100
118
6
U
0.75
85
100
RD100X6PEHP*
100
118
6
H
0.75
85
150
EC1778INT
10
150
EC150
10
100
RD100X6PEP*
100
118
6
P
0.75
85
225
EC5064INT
10
225
EC225
10
150
RD150X6PE/1
150
178
6
U
1.2
36
300
EC6010INT
10
300
EC300
10
36
375
EC375
10
EC400
10
RD150X6PEHP/1
150
178
6
H
1.2
150
RD150X6PEP/1
150
178
6
P
1.2
36
400
225
RD225X6PE/1
225
267
6
U
2.45
14
450
EC450
10
EC500
10
EC600
10
RD225X6PEHP/1
225
267
6
H
2.45
14
RD225X6PEP/1
225
267
6
P
2.45
14
600
300
RD300X6PE/1
300
355
6
U
4.18
9
300
RD300X6PEHP/1
300
355
6
H
4.18
9
300
RD300X6PEP/1
300
355
6
P
4.18
9
375
RD375X6PE/1
375
435
6
U
7.5
5
375
RD375X6PEHP/1
375
435
6
H
7.5
5
375
RD375X6PEP/1
375
435
6
P
7.5
5
400
RD400X6PE/1
400
458
6
U
8.13
5
400
RD400X6PEHP/1
400
458
6
H
8.13
5
400
RD400X6PEP/1
400
458
6
P
8.13
5
450
RD450X6PE/1
450
523
6
U
9.3
1
450
RD450X6PEHP/1
450
523
6
H
9.3
1
450
RD450X6PEP/1
450
523
6
P
9.3
1
500
RD500X6PE/1
500
576
6
U
12.25
1
Nominal size
mm
500
RD500X6PEHP/1
500
576
6
H
12.25
1
100
SRD100
170
100
SRD100NIT
170
500
RD500X6PEP/1
500
576
6
P
12.25
1
150
SRD150
36
150
SRD150NIT
36
600
RD600X6PE/1
600
700
6
U
17.5
1
225
SRD225
14
225
SRD225NIT
14
BRITISH
BOARD OF
AGRÉMENT
600
RD600X6PEHP/1
600
700
6
H
17.5
1
300
SRD300
8
300
SRD300NIT
8
CERTIFICATE No. 90/RO49 & 89/2175
600
RD600X6PEP/1
600
700
6
P
17.5
1
375
SRD375
10
375
SRD375NIT
10
400
SRD400/1
2
400
SRD400NIT/1
2
450
SRD450/1
2
450
SRD450NIT/1
2
500
SRD500/1
2
500
SRD500NIT/1
2
600
SRD600/1
2
600
SRD600NIT/1
2
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
A
Nominal
size mm
A
BBA
CERTIFICATE No. 00/R121
OD
ID
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
Ridgidrain integrally socketed pipe
CATE No. 93/R078
CERTIFICATE No. 90/R054
CERTIFICATE No. 03/3979
Order seals separately if required, 1 per length.
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 02/3923
A
BBA
A
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
PA05/05460
BRITISH
BOARD OF
AGRÉMENT
CATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
22
Code
ID
mm
OD
mm
Length
m
Option
Weight
kgm-1
Pack qty
400
RD400X6/1
400
458
6
U
8.0
5
400
RD400X6HP/1
400
458
6
H
8.0
5
400
RD400X6P/1
400
458
6
P
8.0
5
450
RD450X6/1
450
523
6
U
9.0
1
450
RD450X6HP/1
450
523
6
H
9.0
1
450
RD450X6P/1
450
523
6
P
9.0
1
500
RD500X6/1
500
576
6
U
12.0
1
500
RD500X6HP/1
500
576
6
H
12.0
1
500
RD500X6P/1
500
576
6
P
12.0
1
600
RD600X6/1
600
700
6
U
14.0
1
600
RD600X6HP/1
600
700
6
H
14.0
1
600
RD600X6P/1
600
700
6
P
14.0
1
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for more information.
U = Unperforated H = Half perforated P = Fully perforated
Weights are nominal.
THE GROWING
IMPORTANCE
GULLIES
OF SUDS
LINFLEX FIN
AND NARROW
FILTER DRAINS
RIDGITREAT
Size kg
Code
Pack qty
1
LUBX1
12
2.5
LUBX2.5
4
Ridgidrain Seals
Code
RIDGIDRAIN
CASE STUDIES
Plastic tub of lubricant
Ridgidrain Nitrile Seals
Pack qty
Nominal size
mm
Code
Pack qty
Ridgidrain sealing rings
EPDM seals to BS EN 681:Part 1 as standard.
Optional nitrile seals are available, but may be
subject to order quantities and lead times.
PA05/05460
Made to order and subject to lead times.
Typically used where soil contains certain
chemicals. Please send soil reports to our
Technical Team.
Ridgidrain Double Socket Couplings
Nominal
size mm
Code
A
mm
B
mm
Pack qty
100
CRD100
140
133
43
150
CRD150
185
186
18
225
CRD225
260
289
300
CRD300
280
379
BBA
3
375
CRD375
335
460
1
400
CRD400DS/1
400
475
1
450
CRD450DS/1
435
540
1
500
CRD500DS/1
489
589
600
CRD600DS/1
560
719
A
7
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
1
BBA
1
BRITISH
BOARD OF
AGRÉMENT
Slip couplers available on request.
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 02/3923
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
B
CERTIFICATE No. 93/R078
CERTIFICATE No. 00/R1221
All dimensions provided are nominal.
Not suitable for air tests.
Manufactured from polyethylene.
RIDGIDRAIN
JUNCTIONS,
REDUCERS,
SPIGOTS &
SOCKETS
Plastic Tub of Lubricant
BBA
CERTIFICATE No. 00/R121 & 3678
Ridgidrain internal end caps
Made to order and subject to lead times.
Ridgidrain Integrally Socketed Pipes
BRITISH
BOARD OF
AGRÉMENT
Pack qty
100
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for more information.
* Black inner wall.
Made to order and subject to lead times.
U = Unperforated H = Half perforated P = Fully perforated
Weights are nominal.
APPROVAL
INSPECTION
TESTING
CERTIFICATION
NUMBERS
678 & 02/H068
Code
225
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 89/2206
A
Length
m
225
Order seals separately if required,
1 coupler, 2 seals per length.
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 02/3923
OD
mm
Nominal size
mm
500
CERTIFICATE No. 00/R121 & 00/3678
BOARD
OF
Ridgidrain
plain
ended pipe
AGRÉMENT
CATE No. 93/R078
A
BRITISH
BOARD OF
AGRÉMENT
OD
IDNo. 00/R121
CERTIFICATE
ID
mm
Code
External Sealable End Caps
Nominal size
mm
100
150
APPROVAL
INSPECTION
TESTING
CERTIFICATION
NUMBERS
3678 & 02/H068
A
Internal End Caps
Ridgidrain Plain Ended Pipes
A
A
www.polypipe.com/ridgidrain
Ridgidrain pipes, end caps, seals & couplings
RIDGIDRAIN
PIPES, END CAPS,
SEALS &
COUPLINGS
B
BBA
BBA
BBA
BBA
BRITISH
BRITISH
Ridgidrain double
BOARD OF socket couplings
BOARD OF
AGRÉMENT
AGRÉMENT
CERTIFICATE No. 90/R054
CERTIFICATE No. 03/3979
Order seals separately if required,
2 per coupler.
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
PA05/05460
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
All dimensions provided are nominal.
23
RIDGIDRAIN
OVERVIEW
SECTION 2
RIDGIDRAIN
BENDS &
JUNCTIONS
A
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
NUMBERS
3678 & 02/H068
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 02/3923
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
BBA
Code
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
Pack qty
100
BRD100X11.25
10
100
BRD100X87.5
10
150
BRD150X15
10
150
BRD150X87.5
10
225
BRD225X11.25
1
225
BRD225X90
1
300
BRD300X11.25
1
300
BRD300X90
1
375
BRD375X11.25
1
375
BRD375X90
1
400
BRD400X11.25/1
1
400
BRD400X90/1
1
450
BRD450X11.25/1
1
450
BRD450X90/1
1
500
BRD500X11.25/1
1
500
BRD500X90/1
1
600
BRD600X11.25/1
1
600
BRD600X90/1
1
CERTIFICATE No. 00/R1221
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBA
BBA
Ridgidrain 87.5 & 90°
bends
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
Order seals separately if required, 2 per bend.
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 02/3923
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for more
information. Some junctions are made to order and are subject to lead times.
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49 & 89/2175
BBA
BRITISH
BOARD OF
AGRÉMENT
Ridgidrain 22.5° & 30° bends
CERTIFICATE No. 90/R054
CERTIFICATE No. 03/3979
Order seals separately if required, 2 per bend.
A
A
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 02/3923
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
Nominal
size mm
Code
100
BRD100X22.5
150
BRD150X30
45° Ridgidrain Junctions
PA05/05460
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
Code
Pack qty
10
100
100
JRD100100Y
10
10
150
100
JRD150100Y
Pack qty
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/R121
BOARD OF
AGRÉMENT
APPROVAL
INSPECTION
TESTING
CERTIFICATION
BRITISH
NUMBERS
BOARD OF
3678 & 02/H068
BRD225X22.5
1
150
150
JRD150150Y
300
BRD300X22.5
1
225
100
JRD225100Y
1
1
225
150
JRD225150Y
1
225
225
JRD225225Y
300
100
JRD300100Y
300
150
JRD300150Y
300
225
JRD300225Y
BRD375X22.5
400
BRD400X22.5/1
1
450
BRD450X22.5/1
1
500
BRD500X22.5/1
1
600
BRD600X22.5/1
1
AGRÉMENT
CATE No. 90/RO49
CERTIFICATE No. 89/2175
BBA
BRITISH
BOARD OF
APPROVAL
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
A
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
PA05/05460
BBA
BRITISH
BOARD OF
AGRÉMENT
CATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CATE No. 90/RO49
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
Ridgidrain 45° Bends
Nominal
size mm
BBA
BBA
Code
Pack qty
100
BRD100X45
10
150
BRD150X45
10
225
BRD225X45
1
300
BRD300X45
1
375
BRD375X45
1
400
BRD400X45/1
1
CERTIFICATE No. 90/RO49 & 89/2175
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
Order seals separately if required, 2 per bend.
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 02/3923
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 89/2206
CERTIFICATE No. 00/R121 & 3678
Ridgidrain 45° bends
INSPECTION
CATE No.TESTING
93/R078
CERTIFICATION
CATE No. 89/2206
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/R121
& 00/3678
BOARD
OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49 & 89/2175
5
BBA
5
225
375
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
RIDGIDRAIN
JUNCTIONS,
REDUCERS,
SPIGOTS &
SOCKETS
THE GROWING
IMPORTANCE
GULLIES
OF SUDS
LINFLEX FIN
AND NARROW
FILTER DRAINS
PA05/05460
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
CERTIFICATE No. 00/R121 & 3678
RIDGIDRAIN
CASE STUDIES
CERTIFICATE No. 90/RO49 & 89/2175
1
1
BBA
1
1
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 89/2206
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
300
300
JRD300300Y
375
100
JRD375100Y
1
1
375
150
JRD375150Y
1
375
225
JRD375225Y
375
300
JRD375300Y
1
BBA
1
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
375
375
JRD375375Y
1
400
100
JRD400100Y/1
1
400
150
JRD400150Y/1
1
400
225
JRD400225Y/1
400
300
JRD400300Y/1
1
BBA
400
400
JRD400400Y/1
1
450
100
JRD450100Y/1
1
450
150
JRD450150Y/1
1
450
225
JRD450225Y/1
450
300
JRD450300Y/1
BBA
1
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 02/3923
1
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BRD450X45/1
1
450
375
JRD450375Y/1
1
BRD500X45/1
1
450
450
JRD450450Y/1
1
600
BRD600X45/1
1
500
100
JRD500100Y/1
1
500
150
JRD500150Y/1
500
225
JRD500225Y/1
BBA
1
500
300
JRD500300Y/1
1
500
375
JRD500375Y/1
1
500
400
JRD500400Y/1
1
This brochure incorporates the most common bends and junctions. Bends
500
500
JRD500500Y/1
and junctions incorporating other angles and diameters are available as specials.
600
100
JRD600100Y/1
BBA
1
Manholes, catchpits, soakaways, ducting drawpits, pumping chambers and
600
150
JRD600150Y/1
1
specialist items manufactured to customer specifications are also available.
600
225
JRD600225Y/1
1
For further information, see Section 4 of this brochure or contact our
600
300
JRD600300Y/1
1
600
450
JRD600450Y/1
1
600
600
JRD600600Y/1
1
1
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
Ridgidrain
45° junctions
BRITISH
BRITISH
BOARD OF
BOARD OF
BBA
BBA
All junctions are triple socketed.
AGRÉMENT
CERTIFICATE No. 90/R054
AGRÉMENT
CERTIFICATE No. 03/3979
Order seals and couplers separately.
1
500
Technical Team on +44 (0) 1509 615100.
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49
450
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for more
information. Some junctions are made to order and are subject to lead times.
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
Nominal
size B mm
CERTIFICATE No. 00/R1221
BBA
BBA
Nominal
size A mm
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for more
information. Some junctions are made to order and are subject to lead times.
CATE No. 02/H068
A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 89/2206
A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
CATE No. 93/R078
A
BBA
Pack qty
Ridgidrain 22.5° & 30° Bends
CATE No. 90/RO49
A
A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
A
A
A
CERTIFICATE No. 03/3979
Code
Ridgidrain 87.5 & 90° Bends
Nominal
size mm
RIDGITREAT
PA05/05460
APPROVAL
INSPECTION
TESTING
CERTIFICATION
NUMBERS
3678 & 02/H068
A
BBA
BRITISH
BOARD OF
AGRÉMENT
Nominal
size mm
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for more
information. Some junctions are made to order and are subject to lead times.
CATE No. 02/H068
A
CERTIFICATE No. 00/R121 & 00/3678
Order seals separately if required, 2 per bend.
A
A
BRITISH
BOARD OF
AGRÉMENT
BBA
Ridgidrain 11.25° & 15° Bends
BRITISH
BOARD OF
AGRÉMENT
Ridgidrain 11.25° & 15° bends
CATE No. 93/R078
A
BRITISH
BOARD OF
AGRÉMENT
B
A
www.polypipe.com/ridgidrain
Ridgidrain bends & junctions
RIDGIDRAIN
PIPES, END CAPS,
SEALS &
COUPLINGS
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
CERTIFICATE No. 00/R121 & 3678
CERTIFICATE No. 90/RO49 & 89/2175
1
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 89/2206
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for
more information. Other sizes available on request.
Some junctions are made to order and are subject to lead times.
24
All dimensions provided are nominal.
All dimensions provided are nominal.
25
RIDGIDRAIN
OVERVIEW
SECTION 2
B
A
BBA
CERTIFICATE No. 00/R121
BBA
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
CERTIFICATE No. 03/3979
All junctions
are triple socketed.
Order seals and couplers separately.
A
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 02/3923
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CATE No. 02/H068
A
BBA
A
BRITISH
Ridgidrain
90° junctions
BOARD OF
BRITISH
BOARD OF
AGRÉMENT
CATE No. 93/R078
A
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CATE No. 90/RO49
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49 & 89/2175
A
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CATE No. 89/2206
Diameter B
Ridgidrain Level Invert Reducers
90° Ridgidrain Junctions
APPROVAL
INSPECTION
TESTING
CERTIFICATION
NUMBERS
3678 & 02/H068
A
www.polypipe.com/ridgidrain
Ridgidrain junctions, reducers, spigots & sockets
Diameter A
Pack qty
Nominal
size A mm
Nominal
size B mm
JRD100100T
10
150
100
ARD150100
100
JRD150100T
10
225
150
ARD225150
150
JRD150150T
1
300
150
ARD300150
225
100
JRD225100T
1
300
225
ARD300225
225
150
JRD225150T
1
375
225
ARD375225
225
225
JRD225225T
1
375
300
ARD375300
300
100
JRD300100T
1
300
150
JRD300150T
1
400
150
ARD400150/1
300
225
JRD300225T
1
400
225
ARD400225/1
Ridgidrain level invert reducers
300
300
JRD300300T
1
400
300
ARD400300/1
Order seals separately if required.
375
100
JRD375100T
1
400
375
ARD400375/1
375
150
JRD375150T
1
450
150
ARD450150/1
375
225
JRD375225T
1
450
225
ARD450225/1
375
300
JRD375300T
1
450
300
ARD450300/1
375
375
JRD375375T
1
450
375
ARD450375/1
400
100
JRD400100T/1
1
450
400
ARD450400/1
400
150
JRD400150T/1
1
500
225
ARD500225/1
400
225
JRD400225T/1
1
500
300
ARD500300/1
400
300
JRD400300T/1
1
500
375
ARD500375/1
400
400
JRD400400T/1
1
500
400
ARD500400/1
450
100
JRD450100T/1
1
500
450
ARD500450/1
450
150
JRD450150T/1
1
600
100
ARD600100/1
450
225
JRD450225T/1
1
600
150
ARD600150/1
450
300
JRD450300T/1
1
600
225
ARD600225/1
450
375
JRD450375T/1
1
600
300
ARD600300/1
450
450
JRD450450T/1
1
600
375
500
100
JRD500100T/1
1
ARD600375/1
500
150
JRD500150T/1
1
600
450
ARD600450/1
500
225
JRD500225T/1
1
600
500
ARD600500/1
500
300
JRD500300T/1
1
500
375
JRD500375T/1
1
500
500
JRD500500T/1
1
600
100
JRD600100T/1
1
600
150
JRD600150T/1
1
600
225
JRD600225T/1
1
600
300
JRD600300T/1
600
450
JRD600450T/1
600
600
JRD600600T/1
Nominal
size A mm
Nominal
size B mm
100
100
150
150
Code
Code
RIDGIDRAIN
BENDS &
JUNCTIONS
RIDGIDRAIN
JUNCTIONS,
REDUCERS,
SPIGOTS &
SOCKETS
THE GROWING
IMPORTANCE
GULLIES
OF SUDS
PA05/05460
LINFLEX FIN
AND NARROW
FILTER DRAINS
RIDGITREAT
RIDGIDRAIN
CASE STUDIES
Some junctions are made to order and are subject to lead times.
Ridgidrain to BS EN 1401 Spigot and Socket
Description
Code
Pack qty
1
100mm Ridgidrain socket to 110mm BS EN 1401 spigot
ARD100110
10
1
150mm Ridgidrain socket to 160mm BS EN 1401 spigot
ARD150160
10
1
100mm Ridgidrain socket to 110mm BS EN 1401 socket
ARD100110 & UG401
10
150mm Ridgidrain socket to 160mm BS EN 1401 socket
ARD150160 & UG601
10
Sizes 750-3000mm are available as Ridgistorm-XL, please see Section 3 of this brochure for more
information. Other sizes available on request. Some junctions are made to order and are subject
to lead times.
RIDGIDRAIN
PIPES, END CAPS,
SEALS &
COUPLINGS
ARD150160
Order seals separately if required.
Ridgidrain to Super Clay Socket
Description
Code
Pack qty
100mm Ridgidrain socket to 100mm Super Clay socket
ARD100110 & UG434
10
150mm Ridgidrain socket to 150mm Super Clay socket
ARD150160 & UG634
10
ARD100110
Some sockets are made to order and subject to lead times.
Order seals separately if required.
UG634
Ridgidrain to Thick Clay Socket
Description
Code
Pack qty
100mm Ridgidrain socket to 100mm Thick Clay socket
ARD100110 & UG486
10
150mm Ridgidrain socket to 150mm Thick Clay socket
ARD150160 & UG696
10
Some sockets are made to order and subject to lead times.
Order seals separately if required.
26
All dimensions provided are nominal.
UG696
All dimensions provided are nominal.
27
RIDGIDRAIN
OVERVIEW
SECTION 2
Midigully
A high quality, light, easy to handle and install alternative to heavy concrete gullies.
Midigully is an ideally sized gully for domestic and smaller capacity industrial
Ridgigully is manufactured in durable HDPE in 3 sizes. Ridgigully is suitable for both
and commercial applications.
systems. A range of accessories are available, including gully risers that key into the
Midigully key benefits
gully and eliminate the need for brickwork to finish level.
RIDGIDRAIN
JUNCTIONS,
REDUCERS,
SPIGOTS &
SOCKETS
THE GROWING
IMPORTANCE
GULLIES
OF SUDS
• Manufactured in durable HDPE
• Spigot outlet, suitable for connection to 110mm BS EN 1401
sockets that can also be adapted to 100mm Ridgidrain
Ridgigully key benefits
• Nested gullies lock together for easy handling, transportation
• Unique, patented screw thread corrugations
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
and safer storage on-site
LINFLEX FIN
AND NARROW
FILTER DRAINS
RIDGITREAT
• Light in weight with superior strength
• A range of adaptors available
• Effective keying into the concrete surround
• Optional aluminium silt buckets and cast iron gratings
RIDGIDRAIN
CASE STUDIES
• Nested gullies lock together for easy handling, transportation and safer
storage on-site
• BBA approved
BBA
BRITISH
BOARD OF
AGRÉMENT
FICATE No. 93/R078
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
Midigully
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
(Applies to Ridgigully only)
Code
Diameter
mm
Depth
mm
Capacity
litres
Pack qty
RG300600
300
600
24
36
Ridgigully
BA
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
APPROVAL
INSPECTION
TESTING
CERTIFICATION
ICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
Description
Code
Diameter
mm
Capacity
litres
Pack qty
750mm Ridgigully
RG450750
450
80
16
900mm Ridgigully
RG450900
450
104
16
UG602
160
-
-
-
BS EN 1401 Coupling
BBA
BRITISH
BOARD OF
AGRÉMENT
FICATE No. 02/H068
BA
Ridgigully
adapted using the multi adaptor (ARG multi) to Ridgidrain, Polysewer and other pipe
BA
BA
RIDGIDRAIN
BENDS &
JUNCTIONS
trapped and untrapped systems with a 160mm spigot outlet as standard, which is easily
APPROVAL
INSPECTION
TESTING
CERTIFICATION
E NUMBERS
/3678 & 02/H068
BA
www.polypipe.com/ridgidrain
Gullies
RIDGIDRAIN
PIPES, END CAPS,
SEALS &
COUPLINGS
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BRITISH
BOARD OF
AGRÉMENT
Multi Adaptor
ARGMulti
Midigully Accessories
Description
Code
-
110mm BS EN 1401 coupling
UG402
20
Silt Bucket
RGSB
Grating
RGG
CERTIFICATE No. 00/R121 & 3678
Made to order and subject to lead times.
BBA
BRITISH
BOARD OF
AGRÉMENT
FICATE No. 90/RO49
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
BBA
Gully Chutes and large diameter gullies
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49 & 89/2175
BA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
FICATE No. 89/2206
Ridgiflex
Gully Chutes, larger diameter gullies and sumpless gullies are also available
Ideal for flexible gully connections, 150mm single wall corrugated Ridgiflex
channels is required. For more information on our fabrication capabilities and
has the same external profile as Ridgidrain. Available in 25m coils, it is
benefits, please see Section 4 of this brochure, or contact our Technical Team
compatible with standard Ridgidrain fittings.
on +44 (0) 1509 615100.
where larger flow rates are required, or an interface with slot drains or dished
Ridgiflex Gully Connection Pipe
28
All dimensions provided are nominal.
ID
mm
OD
mm
Code
Length
m
150
178
RF150X25
25
Gully Chute
All dimensions provided are nominal.
29
RIDGIDRAIN
OVERVIEW
SECTION 2
www.polypipe.com/ridgidrain
Linflex Fin and Narrow Filter Drains & Ridgitreat
RIDGIDRAIN
BENDS &
JUNCTIONS
Linflex Fin and Narrow Filter Drains
Ridgitreat
Linflex Fin and Narrow Filter Drains provide drainage for both surface and
Ridgitreat surface water treatment pipes are designed to complement
sub-surface water. For applications where sub-surface only drainage is required,
the existing Ridgidrain range when using a treatment infiltration
e.g. low capacity drainage for keeping water out of road structures, Fin and
solution. It comprises of a perforated HDPE plain ended Ridgidrain
Narrow Filter Drains may be used as an alternative. These products are for use
twinwall surface water pipework, wrapped in Permafilter Geotextile.
in edge-of-pavement drains for collection and/or disposal of sub-surface water
The semi-permeable Permafilter Geotextile is engineered to catch,
in accordance with the requirements of Highways England.
filter and break down hydrocarbon deposits such as oil and petrol
from surface water, before infiltrating into the surrounding soil.
The Permafilter geotextile provides a habitat for naturally occurring
Linflex Fin and Narrow Filter Drains key benefits
micro-organisms that feed on the trapped oil, removing pollutants
• Reduced requirement for aggregate
that which is expected with a generic geotextile. The oil retention
• Elimination of stone scatter by vehicles
• Manufactured to meet Highways England requirements
(MCHW, Volume 3, Drawings F18, F19 and F20)
• Available in Type 6 and Type 8 configurations
RIDGIDRAIN
JUNCTIONS,
REDUCERS,
SPIGOTS &
SOCKETS
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
THE GROWING
IMPORTANCE
GULLIES
OF SUDS
CERTIFICATE No. 00/R121 & 00/3678
LINFLEX FIN
AND NARROW
FILTER DRAINS
through biodegradation, extending the product’s design life beyond
capability is 800 ml/linear metre.
• Reduced possibility of water logging of road base due to surface water inflow
RIDGIDRAIN
PIPES, END CAPS,
SEALS &
COUPLINGS
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
RIDGITREAT
CERTIFICATE No. 03/3979
Applications
• Rail
• Commercial
• Car Parks
• Leisure
• Highways
• Retail
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 02/3923
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
RIDGIDRAIN
CASE STUDIES
CERTIFICATE No. 00/R1221
Linflex Type 6 Fin Drain
PVCu perforated corrugated pipe to BS 4962:1989 supplied assembled with a composite
plastic fin of two layers of geotextile separated by a plastic core. The geotextile is a
Ridgitreat key benefits
non-woven fabric of heat-bonded polypropylene/polyethylene filaments. The product
• A range of pipes and fittings available from 100-300mm
is delivered to site in a polyethylene protective wrapper for UV protection. Linflex
• Ridgidrain is BBA and BBA HAPAS approved
Type 6 Fin Drain is manufactured in accordance with MCHW, Volume 1, sub-clause 514.
• Ridgidrain is Network Rail Parts and Drawing Systems
Linflex Type 6 Fin Drain
BBA
BBA
Linflex Type 6 Fin Drain
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 02/3923
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 00/3678
BBA
BRITISH
Nominal
size
BOARD
OF
AGRÉMENT
mm
Code
CERTIFICATE No. 00/R121 & 00/3678
Fin Depth
mm
Connector code
FD80X12.5X600
12.5
600
DC80M
80
FD80X12.5X750
12.5
750
DC80M
80
FD80X12.5X900
12.5
900
DC80M
FD100X12.5X600
12.5
600
DC100M
BBA100
BOARD OF
AGRÉMENT
BBA
CERTIFICATE No. 02/H068
BBA
CERTIFICATE No. 00/R121 & 3678
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 89/2175
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49 & 89/2175
need for end of line petrol interceptors
• Structured wall design for high ring stiffness and strength
750
DC100M
12.5
1000
DC100M
• Smooth bore giving excellent hydraulic properties
160
FD160X12.5X600
12.5
600
DC160M
• EPDM sealing rings
160
FD160X12.5X750
12.5
750
DC160M
Made BRITISH
to order and subject to lead times.
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE No. 89/2206
control sustainable drainage system and eliminates the
12.5
• Longer lengths so fewer joints for improved resilience
to leakage
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
Microscopic view of
self-maintaining eco-system
• Light weight for reduced transport / installation costs
and improved Health and Safety benefits
Single wall PVCu perforated corrugated pipe to BS 4962:1989 supplied in geotextile
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
• Enhances water quality when used as part of a source
FD100X12.5X1000
Linflex Type 8 Narrow Filter Drain
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
by biodegration
FD100X12.5X750
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/RO49
100
CERTIFICATE No. 03/3979
BBA
BBA(Approvals forPA05/05460
BBA
Ridgidrain)
• Captures residual hydrocarbons and removes pollutants
Length
m
80
100
BRITISH
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
(PADS) approved
APPROVAL
INSPECTION
TESTING
CERTIFICATION
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BBA
The product is delivered to site in a polyethylene protective wrapper for UV
BRITISH
BOARD OF
AGRÉMENT
which is a non-woven fabric of heat-bonded polypropylene/polyethylene filaments.
• Incorporates recycled plastic
• Resistant to ground movement and differential settlement
Oil retention capability is
800 ml/linear metre.
CERTIFICATE No. 00/R121 & 3678
protection. Linflex Type 8 Narrow Filter Drain is manufactured in accordance
with MCHW, Volume 1, sub-clause 515.
BBA
BBA
BRITISH
BOARD OF
APPROVAL
INSPECTION
AGRÉMENT
TESTING
CERTIFICATE No.
90/RO49
CERTIFICATION
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BBA
BRITISH
BOARD OF
BRITISH
AGRÉMENT
BOARD
OF
CERTIFICATE
No. 89/2175
AGRÉMENT
CERTIFICATE No. 00/R121
Linflex Type 8 Narrow Filter Drain
BBA
BBA
APPROVAL
INSPECTION
BRITISH
TESTING
BOARD
OF
CERTIFICATION
AGRÉMENT
CERTIFICATE No.
89/2206
CERTIFICATE No. 93/R078
30
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
BBA
CERTIFICATE No. 00/R121 & 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
Linflex Type 8 Narrow Filter Drain
mm
Code
60
GE60150
APPROVAL
INSPECTION
TESTING
CERTIFICATION
BBA
BRITISH
BOARD OF
AGRÉMENT
Length
m
150
Code
Length
m
Weight
kg
Connector
code
100
RDT100X6PEP
6
5
CRD100
150
RDT150X6PEP/1
6
7.5
CRD150
DC60
225
RDT225X6PEP/1
6
15
CRD225
300
RDT300X6PEP/1
6
25.5
CRD300
Connector code
80
GE80100
100
DC80M
100
GE100100
100
DC100M
160
GE16045 *
45
DC160M
Made to order and are subject to lead times.
* Not BBA approved.
All dimensions provided are nominal.
APPROVAL
INSPECTION
TESTING
CERTIFICATION
BBA
BBA
Nominal size
BRITISH
BOARD OF
BRITISH AGRÉMENT
BOARD OF
CERTIFICATE
No. 90/RO49 & 89/2175
AGRÉMENT
Ridgitreat Plain Ended Pipe
Nominal size
mm
Note: Please use Ridgidrain sealing rings for jointing, see page 23 for more information.
All dimensions provided are nominal.
31
RIDGIDRAIN
OVERVIEW
SECTION 2
www.polypipe.com/ridgidrain
Ridgidrain
Case studies - M27, Junction 3-4 and 10-11
- Heathrow Terminal 5
Case studies - M4, Junction 13
- M25, Junctions 27 and 30
RIDGIDRAIN
PIPES, END CAPS,
SEALS &
COUPLINGS
RIDGIDRAIN
BENDS &
JUNCTIONS
RIDGIDRAIN
JUNCTIONS,
REDUCERS,
SPIGOTS &
SOCKETS
THE GROWING
IMPORTANCE
GULLIES
OF SUDS
LINFLEX FIN
AND NARROW
FILTER DRAINS
RIDGITREAT
RIDGIDRAIN
RIDGIDRAIN
CASE STUDIES
STUDIES
CASE
32
M27 road widening scheme
Heathrow Terminal 5
M4 Junction 13 improvement
M25 widening project
We supplied Ridgidrain surface water drainage products for
As partnering suppliers on the huge T5 project, we supplied
We were appointed to design and deliver a drainage
We provided 100,000m of surface water drainage
the widening of the M27 between Junctions 3-4 and 10-11 near
main contractors AMEC and Laing O’Rourke with Ridgiduct
project that was easy to handle and quick to install
products including Ridgidrain and large-diameter
Portsmouth, a £78m improvement scheme led by Costain on
and Ridgidrain products. Our Technical Design Team produced
within project timelines. The A34/M4 upgrade was
Ridgistorm-XL pipe, gullies and cable protection for
behalf of Highways England. Concrete pipes were originally
a one-off Ridgiduct design, complete with CAD Drawings,
a major infrastructure project and part of the
street lighting and motorway communications. In
considered, but as the works were taking place on a live
specifically for the project. This allowed couplers in the air
Government’s Targeted Programme for Improvement (TPI),
addition to the Ridgistorm-XL and Ridgidrain products,
highway they were deemed not the most appropriate option.
ducting, that serves the air-side road tunnel, to be spaced every
involving 15,000m2 of lime cement. Working closely with
we also teamed up with supply and fix partners,
This aided the specifier’s decision to choose Polypipe due to
12 metres instead of the usual 6. The result was a saving of
main contractor Costain, we provided a Ridgidrain
Stormwater Management Limited, to supply three
the speed and ease of installation offered by plastic products.
50% in coupling costs, along with significant savings in time,
structured-wall pipe system in diameters from 150mm to
separate off-line attenuation structures using our
Ridgidrain, which includes an integral socket for faster
materials and labour. On projects such as T5, where even small
450mm. Its excellent performance, longer lengths and
Polystorm modular cell system. These were installed in
installation, was used on the busiest sections of motorway to
savings are magnified by the sheer volumes involved, such close
effective jointing system meant it could be installed
the soft-verge embankments to control surface water
allow faster progress and reduce the danger to road crews.
interaction between suppliers and contractors can have a huge
quickly and easily to save time and money on-site. We also
run-off from the carriageway. A total of 9330 Polystorm
Polypipe and Costain have worked together on a number of
impact on final costs.
provided cable protection ducting for communications,
cells have been installed between Junctions 27 and 30.
road projects and our Technical Design and Product Support
lighting and motorway signage. The long-term benefits
Teams again proved their ability to fabricate bespoke products
of the upgrade can be seen in a marked improvement in
and deliver them safely and economically to project timelines.
carriageway drainage and substantially easier traffic flow.
33
RIDGISTORM-XL
OVERVIEW
SECTION 3
www.polypipe.com/ridgistorm-xl
Ridgistorm-XL
RIDGISTORM-XL
APPLICATIONS
RIDGISTORM-XL
PIPING SYSTEM
Ridgistorm-XL overview
RIDGISTORM-XL
JOINTING
OPTIONS
Ridgistorm-XL is an innovative large diameter piping system, available in sizes 750-3000mm in diameter.
It can be used for a wide range of applications including surface water drainage, foul and combined
sewers, large scale flood alleviation schemes and even displacement ventilation and renewable energy.
THE GROWING
RIDGISTORM-XL
IMPORTANCE
CASE STUDIES
OF SUDS
Polypipe Drainage Pipework Applications
Ridgistorm-XL key benefits
FOUL/COMBINED
SYSTEM
STORMWATER/SURFACE WATER SYSTEM
• Pipe lengths available from 1.25-12m
• Integrally socketed system to aid pipe alignment
• Pre-fabricated modularised system incorporating flow
controllers and treatment devices, manholes and fittings
MANUAL OF
CONTRACT
DOCUMENTS FOR
HIGHWAY WORKS
SPECIFICATION
(MCHW)
WATER COMPANY
ADOPTED/
SPECIFICATION
NO
YES
WATER COMPANY
ADOPTED/
SPECIFICATION
SOLID WALL
BS EN 1401
• Lighter weight for reduced plant requirements
• Multiple jointing options include electro-fusion welding,
seal jointing & extrusion welding
• Extremely durable – service lifetime expectancy of at
least 100 years
NO
• Designed to optimum stiffness classification
POLYSEWER
YES
RIDGIDRAIN
RIDGISEWER
• Superior performance in areas of differential settlement
• Excellent resistance to sulphate and chemical attack
RIDGISTORM-XL
RIDGIDRAIN
• Excellent load bearing capability
SOLID WALL
BS EN 1401
POLYSEWER
RIDGISTORM-XL
• Superior hydraulic performance achieved through
smooth bore
RIDGISEWER
RIDGISTORM-XL
• Saddles available for 150mm lateral pipe connections
• Pre-fabricated dry weather flow channels available
RIDGISTORM-XL
A versatile solution
Standards, approvals and certifications
Robust, reliable and long-lasting, Ridgistorm-XL is one of
•
the most adaptable large diameter piping solutions in the UK.
In fact, our designers can engineer exact stiffness classifications
installation under Section 104 and Section 106 and agreements*
•
for the pipe system to meet variable loading specifications by
analysing site conditions and installation parameters. This means
we can deliver an effective solution that is fully adaptable.
Contents
Water Company Approved for Capital Works projects and
Compliant with MCHW, Volume 1, Series 500 (Specification
for Highway Works)**
•
•
SECTION 3
Ridgistorm-XL
Ridgistorm-XL overview
34 - 35
Series 2500 through BD2/05 Standard for highways schemes
Ridgistorm-XL applications
36 - 39
Structural calculations in accordance with BS EN 1295-1,
Ridgistorm-XL piping system
40 - 41
Ridgistorm-XL jointing options
42 - 43
Ridgistorm-XL case studies
44 - 45
AIP acceptance to Specification for Highway Works,
the Structural Design Standard for Buried Pipelines
•
WRc approved
•
Manufactured to meet the material requirements of
BS EN 13476:2007 (Part 1-3), Plastic Piping Systems for
Non-Pressure Underground Drainage and Sewerage
•
Compliant with the requirements of the Civil Engineering
Specification for the Water Industry 7th Edition (CESWI)
•
Compliant with the requirements of Sewers for Adoption
7th Edition (SfA)
•
Compliant with the requirements of Sewers for Scotland
3rd Edition (SfS)
•
34
Certified to BSI ISO9001 and BSI ISO14001
*We would recommend that local water company approval is confirmed
before a final design is complete. **SHW Series 500 applies to 750 and 900mm only.
35
RIDGISTORM-XL
OVERVIEW
SECTION 3
www.polypipe.com/ridgistorm-xl
Ridgistorm-XL
RIDGISTORM-XL
PIPING SYSTEM
Applications
RIDGISTORM-XL
JOINTING
OPTIONS
Ridgistorm-XL is a versatile solution, proven for applications ranging from pipelines for surface
water drainage and foul sewer schemes, to attenuation structures and large diameter manholes
and pre-fabricated component chambers.
36
THE GROWING
RIDGISTORM-XL
IMPORTANCE
CASE STUDIES
OF SUDS
Waste water and sewer
Flood alleviation
Component chambers and manholes
Our Ridgistorm-XL pipe system offers the perfect solution
for use in sewer and waste water systems. The pipes have
excellent chemical resistance, are lighter in weight than
concrete equivalents thereby reducing on-site Health and
Safety risks, yet are strong and durable enough to withstand
ground movement and differential settlement. All of our
solutions are fully compliant with Sewers for Adoption,
7th Edition, CESWI and are accepted for use by all UK Water
Companies for Capital Works, Section 104 and Section 106
agreements. Low Flow Channels can be incorporated within
the Ridgistorm-XL pipes for improved performance. Lifting
points, Safety Chain Assemblies, Guardrail Assemblies
and specialist ironmongery have been developed in response
to pipeline designers and contractors seeking innovation in
safer, faster and more cost-effective installations.
Developers are facing the challenges of having to store
increasing volumes of flood water, as they look to satisfy
the requirements of local authorities and Government
agencies to obtain planning. Increasingly, engineered
solutions are being required to satisfy these requirements.
Ridgistorm-XL single pipe runs or multi-leg tanks offer
flexibility in design and can form part of an engineered
solution, being located under highways or POS (public
open space) areas.
Ridgistorm-XL is the ideal solution for pre-fabricated
manholes or component chambers. They are modular,
ready-to-install man-access solutions that integrate at
any point in a drainage network system to control flow
and to facilitate inspection and maintenance.
Applications
•
Sewer pipework
•
Flow meter chambers
•
Low flow systems
•
Inter process pipework
•
Pumping stations
•
CSO storage
•
Valve chambers
Applications
•
Control chambers
•
Inlet chambers
•
Oversized manholes
- Flow controllers
•
Offset manholes
- Non-return valves
•
On-line attenuation
•
Low flow systems
•
Pumping stations
- Penstocks
•
Off-line attenuation
•
Stormwater run-off
•
Overflow storage tanks
- Flap valves
Culverts
•
Weir walls
- Gate valves
•
Catchpits
•
•
Applications
RIDGISTORM-XL
APPLICATIONS
Infiltration tanks
Multi-leg storage
•
For more information about our
component chambers and manholes,
please see Section 4 of this brochure.
37
RIDGISTORM-XL
OVERVIEW
SECTION 3
www.polypipe.com/ridgistorm-xl
Ridgistorm-XL
RIDGISTORM-XL
APPLICATIONS
RIDGISTORM-XL
PIPING SYSTEM
Applications
RIDGISTORM-XL
JOINTING
OPTIONS
THE GROWING
RIDGISTORM-XL
IMPORTANCE
CASE STUDIES
OF SUDS
Infrastructure – Highways and Rail
Renewable energy
Ventilation
Applications
Ridgistorm-XL has gone through extensive product
evaluation to be compliant with MCHW Volume 1,
Series 500 (Specification for Highway Works) (750-900mm)
and AIP acceptance to Specification for Highway Works,
Series 2500 through BD2/05 Standard for Highways
Schemes (1050-3000mm). In addition, the pipes are lighter
in weight than legacy products and have seal jointing for
quicker, easier and safer installation – key considerations
for infrastructure projects.
Ridgistorm-XL can be used in a variety of ways to help
aid sustainable renewable energy. The system’s strength,
durability and versatility allows large tank structures to
be created for both above and below ground applications.
Ridgistorm-XL pipes are increasingly being used as a
displacement ventilation system conduit. Using the pipe
as either an underground or above ground ventilation
system, the Biomaster anti-microbial inner lining and
electro-fusion welding allows for excellent air quality.
•
Earth tubes
•
Ventilation ducts
•
Inter process pipework
•
Valve chambers
•
Baffle housings
•
Service access chambers
•
Flange connectors
•
Landfill ventilation plenums
•
Condensate chambers
Applications
•
Surface water pipelines
•
Manholes
•
Component chambers
•
Catchpits
•
UTX Chambers
•
Low flow systems
•
Culverts
Applications
•
Domestic rainwater harvesting
•
Commercial rainwater harvesting
•
Water to air cooling storage
•
Anaerobic digestion vessels
•
Biomass plants
An earth tube system allows air temperature to be
preconditioned before entering the building, with
the air drawn into the system via air inlets. This passive
technology enables the transfer of ground source
energy to heat or cool ventilation air, whilst reducing
energy requirements and carbon footprints.
UTX Chambers are Network Rail
PADS approved.
Certificate Number: PA05/05460
38
UTX Chamber
Approved sizes 600-1200mm
39
RIDGISTORM-XL
OVERVIEW
SECTION 3
www.polypipe.com/ridgistorm-xl
Ridgistorm-XL
RIDGISTORM-XL
APPLICATIONS
RIDGISTORM-XL
PIPING SYSTEM
Ridgistorm-XL piping system
Pipe Profiles
Pipe profile designs can be adapted to maximise strength and minimise
the use of material within the pipeline. This improves pipeline
RIDGISTORM-XL
JOINTING
OPTIONS
THE GROWING
RIDGISTORM-XL
IMPORTANCE
CASE STUDIES
OF SUDS
performance and provides a fully engineered solution. Our range of
profiles are integral to the strength and performance of the pipeline.
VW profile
Profile type VW enables the production of
a solid pipe with a smooth inner and outer
surface. These pipes can be produced with
a wall thickness of 5-80mm. This profile is
often used in pressure pipelines and certain
chamber applications.
PR profile
Engineered pipe profile providing
individual stiffness class
Ridgistorm-XL can be engineered to suit any application.
By analysing the site conditions and installation parameters,
our design engineers can create a solution with the
appropriate profile strength and stiffness classifications.
Our production flexibility allows pipe strength to be
produced at varying stiffness classes between SN1-SN8,
Pipes produced with a PR profile achieve
high stiffness with relatively low weight.
This is a common pipe profile for use
in surface water, foul and combined
sewer drainage.
Exceptional leak tightness
Life expectancy
Ridgistorm-XL is designed as a flexible structure to minimise
Ridgistorm-XL is manufactured in
the effects of ground movement, differential settlement
accordance with BS EN 13476:2007
and deformation. Exceptional structural integrity is achieved
(Part 1-3) under ISO 9001 and ISO 14001
Olympia profile
with Ridgistorm-XL due to its engineered pipe profile. It is
certified management systems. A lifetime
manufactured in lengths up to 12m to reduce the number of
expectancy of 100+ years can be
joints, therefore minimising the number of potential leakage
predicted for Ridgistorm-XL using
points and removing the risk of groundwater pollution.
guidelines set out in BS EN ISO 9080.
In addition to the PR profile, the Olympia
profile option can achieve greater pipeline
stiffness with a comparatively low weight.
This profile is often used in the larger
diameters of Ridgistorm-XL.
meaning it is never over nor under engineered, exactly
meeting the design requirements of a particular project.
SQ profile
For more technical information
and dimensions on Ridgistorm-XL
please visit our website
www.polypipe.com/toolbox
Utilising the latest manufacturing technology and
state-of-the-art software enables us to create unique
profile designs to match your site requirements.
This profile option has a smooth inner and
outer surface, including internal profile to
one layer. High stiffness is achieved through
the SQ profile, making it ideal for extremely
high loads or larger diameters.
SQ2 profile
SQ2 offers the same benefits as the
single-layer SQ profile, yet it can be
produced with additional profile layers
for added ring stiffness.
CPR profile
The majority of our pre-fabricated
components have a CPR profile achieving
high stiffness with relatively low weight.
750mm
40
900mm
1050mm
1200mm
1500mm
1800mm
2100mm
2400mm
2700mm
3000mm
41
RIDGISTORM-XL
OVERVIEW
SECTION 3
www.polypipe.com/ridgistorm-xl
Ridgistorm-XL
Jointing options
RIDGISTORM-XL
PIPING SYSTEM
Electro-fusion welding
Ridgistorm-XL can be designed and manufactured to suit any jointing requirements on-site.
Ring seals, electro-fusion welding, extrusion welding, flange connections and mechanical pipe
couplings can all be utilised with the Ridgistorm-XL system, depending on the installation
and application requirements of the project.
We offer the only large diameter plastic pipe
solution with integral electro-fusion jointing.
The whole pipe system effectively becomes a
homogeneous unit. Electro-fusion wire is connected
to the socket end of the pipe during manufacture.
Available for 750-3000mm diameter pipes.
RIDGISTORM-XL
APPLICATIONS
RIDGISTORM-XL
JOINTING
OPTIONS
Electro-fusion wire
THE GROWING
RIDGISTORM-XL
IMPORTANCE
CASE STUDIES
OF SUDS
Tightening strap
(outside)
Welding
adaptor
Socket
Heating wire
Spigot
Tension ring
(larger as DN800)
Extrusion welding
Pipes are jointed with an extrusion welding device.
The jointing method can be carried out inside
and/or outside the pipe. This jointing is most suitable
for low-pressure gravity pipes and manholes.
Ring seal
This is the simplest jointing method which does not require
welding. Available in sizes 750-1800mm this connection uses
integral socket and spigot jointing with two rubber seals,
which are installed into the spigot end of the pipe or fitting.
This allows pipes to be separated in the future if necessary.
Ridgistorm-XL Seals
Pipe diameter mm
Flange connection
This is a special connection, please contact our
Technical Team for further details on +44 (0) 1509 615100.
The ends of pipes and fittings are manufactured with circular
flanges, jointed with the help of steel backing rings and
a rubber gasket.
Flange connection
Pack qty
750
SRST750
1
900
SRST900
1
1050
SRST1050
1
1200
SRST1200
1
1500
SRST1500
1
1800
SRST1800
1
Note: 2 seals required per joint.
42
Code
This method meets the requirements of BS EN 1277.
Nitrile seals are also available, typically for use where
the soil contains certain chemicals. Please send soil
reports to our Technical Team for further assistance.
Extrusion weld
Mechanical pipe coupling
This is a specialist jointing method, please
contact the Technical Team for further details on
+44 (0) 1509 615100.
Mechanical pipe couplings allow pipes to be joined
without the need for flanging, grooving, threading
or welding.
43
RIDGISTORM-XL
OVERVIEW
SECTION 3
www.polypipe.com/ridgistorm-xl
Ridgistorm-XL
Case studies – Gulls Way capital works scheme
– Westbrook Primary School
Case studies – Yorkshire Water
– A5 highway improvements
RIDGISTORM-XL
APPLICATIONS
RIDGISTORM-XL
PIPING SYSTEM
RIDGISTORM-XL
JOINTING
OPTIONS
THE GROWING
RIDGISTORM-XL
IMPORTANCE
CASE STUDIES
OF SUDS
Pre-fabricated Ridgistorm-XL solution chosen for
Polypipe delivers a unique earth tube project as part
Yorkshire Water utilises largest diameter
Vital road improvement project relies
Welsh Water capital works scheme
of the redevelopment of Westbrook Primary School
Ridgistorm-XL for Section 104 trial scheme
on Ridgistorm-XL
The Gulls Way capital works scheme in Heswall, Wirral, required
combined sewer improvements along a residential street where
the existing 450mm concrete sewer had insufficient capacity to
cope with high volumes of rainfall, causing the surrounding
road and a number of properties to flood during storm events.
Working closely with Welsh Water, consultant engineer AECOM,
main contractor Costain and groundworker Mulcair Ltd from
an early design stage, we supplied a fully engineered
Ridgistorm-XL attenuation system comprising of a dual pipe
run to provide an additional 360m3 of storage.
Noise pollution caused by passing aircrafts was a major problem
for Westbrook Primary School, due to its location under one
of the main flight paths for Heathrow Airport. The issue was
exacerbated during summer months when windows needed
to be opened to allow for ventilation in the building, causing
disruption to learning. As part of major new construction works
taking place at the school, Consulting Engineers WSP worked
closely with ourselves and BSRIA to devise an innovative
ventilation solution that minimised the environmental impact
while limiting noise pollution.
A housing development in Featherstone, West Yorkshire has
benefited from our 3,000mm Ridgistorm-XL large diameter
pipe, as part of a unique stormwater attenuation system.
We worked closely with Yorkshire Water and RAB
Engineering Design Limited to provide an innovative
solution for Strata Homes’ ‘Origin’ housing development.
The A5 highway infrastructure improvements near
Hinckley, Leicestershire, had originally specified a concrete
system to provide surface water drainage for the busy
highway, as part of wider improvement works. Utilising
the popular Ridgistorm-XL piping system, our Technical
Team engineered a solution to match the original 750mm
diameter pipe specified to incorporate a single pipe run to
sit beneath the road’s verge, complimented by two separate
twin runs, with a combined length of more than 400m.
As well as providing Ridgistorm-XL pipes in 900mm diameters,
we also utilised our large diameter piping and its ability
to pre-fabricate structural components to create a number of
1500mm chambers and unique modular ‘H’ RIDGISTORMAccess
Manholes to sit between the pipe runs. Saving time and costs
whilst minimising disruption to residents in the immediate local
area was vital, which is why a pre-fabricated system from Polypipe
was ideal for the project.
A modular earth tube structured wall pipework system,
utilising our market leading Ridgistorm-XL large diameter
pipe, was installed as a ground source energy system in order
to precondition the temperature of incoming air before it
enters the building, with air drawn into the earth tube system
via air inlets. This passive technology enables the transfer of
ground source energy to heat or cool ventilation air, stabilising
temperatures without compromising the learning environment.
Earth tubes operate on the understanding that earth
temperatures are relatively constant throughout the year
at just a few metres below ground.
The Ridgistorm-XL system limited the amount of work
undertaken in the highway and ensured that work was able
to progress much quicker than if more traditional methods
had been used. We were able to deliver the chambers to
site with internal benching and step runs incorporated and the
light weight nature of our plastic systems – combined with
Ridgistorm-XL’s factory fitted lifting points – meant that the new
combined sewer system was able to be installed much quicker and
safer than would have otherwise been possible, minimising the
project’s impact on road users and local residents.
44
In the summer, the soil around the pipework will be cooler than
the atmospheric air, so the pipe will deliver cool, fresh air to the
school. Conversely, in winter the soil will be warmer than the
atmospheric air, so the pipe will deliver warm air to the school –
reducing the heating bill of the school. The system allows 100%
fresh air ventilation within the school, creating an improved
internal environment, while reducing the energy required to heat
or cool the building and greatly reducing the school’s carbon
footprint in line with the requirements of the 2011 London Plan.
With limited public open space of just 360m2 available on
the site, we sought to design a solution that utilised our
popular Ridgistorm-XL piping solution in 3,000mm
diameters to form a 430m3 stormwater attenuation system
comprising four legs and two manifolds. In order to avoid
overwhelming the local drainage system, the Ridgistorm-XL
attenuation system discharges stormwater at a flow rate of
127 litres per second. These flow rate calculations ensure
that the system will provide necessary attenuation for the
development in the event of a ‘1 in 100’ year storm event,
whilst allowing additional space to mitigate the effects of
climate change on rainfall, as stipulated by the local
authority, which is also adoptable for Section 104 approval.
The system, designed and manufactured at our dedicated
facility in Loughborough, was delivered to site for
installation and jointed by internal welding by BFS
Nationwide Ltd. The process was made much simpler due
to the inclusion of integral sockets within Ridgistorm-XL,
which work to provide improved alignment between pipes.
We provided structural calculations and assisted consultant
engineer Milestone by engineering a reduction in the pipe
stiffness from the original specification. This was accepted
for use, allowing works to commence as scheduled. With
Ridgistorm-XL being up to 94% lighter in weight than
alternative concrete products, it was easier to handle and
reduced the need for heavy plant machinery, allowing
benefits to the project including reduced time and costs
of the installation.
The installation time was reduced further still as we supply
Ridgistorm-XL in 6 metre lengths with ring seal joints.
This limited the number of joints required and ensured
that each jointing process was as quick as possible – a vital
consideration within a live highways environment. The pipes
were engineered to the exact strength required to meet
the ground conditions and installation parameter, in this
case stiffness classes 2.67kN/m², 3.056kN/m² and 6kN/m²,
allowing the pipe to withstand external loading during
the installation process.
45
FABRICATIONS
OVERVIEW
SECTION 4
www.polypipe.com/fabrications
Fabrications
RIDGISTORMCHECK
CHAMBERS
RIDGISTORMCONTROL
CHAMBERS
RIDGISTORMACCESS
MANHOLES
Fabrications overview
RIDGISTORMSEPARATE
SILT TRAPS &
CATCHPITS
Our ability to provide pre-fabricated, engineered solutions offer a range of benefits that will not only
ensure undertaking your project is more effective and efficient, it will also result in measurable cost
savings. Our modern methods of manufacturing reduce installation time and costs on-site and also
minimise Health and Safety risks during handling, storage and installation.
THE GROWING
RIDGISTORMSEPARATE
IMPORTANCE
CHAMBERS
OF SUDS
Fabrications key benefits
RIDGISTORM-X4
LIFTING POINTS
• Tailor-made, fully-welded, watertight structured
wall chambers to suit project-specific requirements
LOW FLOW CHANNEL
• One-piece installation, off-site construction delivered ready-to-install reducing installation
CHAMBER
ACCESSORIES
time and costs
• Strong but light in weight, minimising Health
and Safety risks in handling and installation
• Manufactured in a factory controlled
environment for improved quality of finish
• Eliminates wastage associated with in-situ
construction
• WRc approved
In-house fabrications department
Off-site construction
Providing a unique and comprehensive service through
We can help you to meet your project deadlines by delivering
our in-house fabrication facility, we are able to create fully
your ready-to-install, pre-fabricated system to site. Our solutions
engineered solutions to precisely match specific project
are manufactured in our factory-controlled environment,
requirements. Whether you require a one piece manhole,
ensuring a superior finish in comparison to those constructed
catchpit, flow control device or treatment filter, a customised
on-site. Additionally, the wastage usually associated with
fitting or specialist bend, our team can engineer the right
on-site construction is removed, so we are not only saving time
system accurately and to the highest quality.
and money, but we are also providing more environmentally
Seamless integration
Our pre-fabricated solutions are designed to integrate
seamlessly within existing drainage or water management
systems, including our Ridgidrain, Ridgisewer or Ridgistorm-XL
systems, or can be engineered to connect to other materials.
Other fabrications are available
for our drainage, sewer and cable
protection ranges.
46
friendly products and systems.
The products included over the following
pages are only an example of what is
possible. For full product datasheets and
standard details please visit our website
www.polypipe.com/toolbox, or to discuss
your project with our Technical Team,
please call +44 (0) 1509 615100.
Other Ridgistorm-XL
fabricated solutions
available include:
•
•
•
•
Bends
Junctions
Reducers
Dual run H chambers
Contents
SECTION 2
Fabrications
Fabrications overview
46 - 47
RIDGISTORMCheck Vortex Flow Control Chamber
48
RIDGISTORMCheck Orifice Plate Flow Control Chamber
49
RIDGISTORMControl Penstock and Valve Chambers
50
RIDGISTORMAccess Manholes
51
RIDGISTORMSeparate Silt Traps
52
RIDGISTORMSeparate Catchpits
53
RIDGISTORMSeparate Weir and Baffle Chamber
54
RIDGISTORMSeparate Filter Chamber
55
RIDGISTORM-X4 Stormwater Treatment System
56
Ridgistorm-XL Lifting Points
57
Ridgistorm-XL Low Flow Channel
58
Ridgistorm-XL Chamber Accessories
59
47
FABRICATIONS
OVERVIEW
SECTION 4
www.polypipe.com/fabrications
Fabrications
RIDGISTORMCHECK
CHAMBERS
RIDGISTORMCONTROL
CHAMBERS
RIDGISTORMCheck Vortex Flow
Control Chamber
RIDGISTORMCheck Orifice Plate
Flow Control Chamber
Where flows within a drainage system are required to be limited or checked (i.e. prior to discharge
from site), with improved hydraulic performance and reduced maintenance, we are able to offer our
RIDGISTORMCheck Vortex Flow Control Chamber.
Where flows within a drainage system are required to be limited or checked (i.e. prior
to discharge from site), in a simple and cost effective design, we are able to offer our
RIDGISTORMCheck Orifice Plate Flow Control Chamber. Incorporating an integral orifice
plate flow control with an optional removable Permavoid filter unit wrapped in a 2mm
polyethylene mesh, to provide filtration and ease of maintenance.
RIDGISTORMCheck Orifice
Plate Flow Control Chamber
key benefits
• Self-activating vortex flow controller which controls
forward flow of water
• No moving parts - virtually maintenance free
• Manufactured with an integral sump for silt
fitted onto a preformed headwall. Each vortex flow control unit
is manufactured to suit the unique hydraulic characteristics of
the site’s drainage system design. RIDGISTORMCheck Vortex
Flow Control Chambers are typically supplied as a single unit,
allowing simple installation and eliminating a number of
construction risks associated with in-situ construction. When
installed in conjunction with our range of pipe systems, they
in overflow
• Step rungs to BS EN 13101 and ladders to BS EN 14396
• Integral lifting points available on request to improve
Health and Safety during handling and installation
Value
PHYSICAL PROPERTIES
providing a hydraulically efficient means of flow regulation
Diameter mm
that does not use moving parts or require power to operate.
Depth
Performance
Material
Colour
Flow control units
the material requirements of BS EN 13476:2007 (Part 1-3).
Manual Bypass Design
The manual bypass design offers a bypass to the flow control
Chemical resistance
Inlets/outlets mm
device to facilitate maintenance. Manually operated from the
surface, the activation of the bypass system opens a door in the
head-wall allowing water in the chamber to drain down via the
bypass pipe.
Non-Bypass Chamber
For sites where discharge rates must be guaranteed
to not exceed a prescribed limit(s).
48
RIDGISTORMCheck Orifice Plate Flow Control Chamber
offers a cost-effective means of limiting flows, particularly
when used in conjunction with our range of attenuation
systems on smaller scale projects.
Applications
Site specific RIDGISTORMCheck Orifice Plate Flow
are engineered to suit a range of stormwater systems,
from Ridgistorm-XL pipework, which is manufactured to meet
• Multiple inlet and outlet options, supplied with
integral sockets as standard allowing quick and
• Depths can be tailored to suit project requirements
offer a fully integrated drainage system.
RIDGISTORMCheck Vortex Flow Control Chambers are fabricated
time and costs
and seamless connection to pipelines
Element
Hydraulic performance
CHAMBER
ACCESSORIES
delivered ready-to-install reducing installation
• Multiple inlet and outlet options, allowing quick
Site specific RIDGISTORMCheck Vortex Flow Control Chambers
LOW FLOW CHANNEL
• One-piece installation, off-site construction,
• Manufactured to adoptable standards
Applications
RIDGISTORM-X4
silt retention
• Available as non-bypass or manual bypass with built
from 1050-3000mm and incorporates a vortex flow control unit,
THE GROWING
RIDGISTORMSEPARATE
IMPORTANCE
CHAMBERS
OF SUDS
• Manufactured with an integral sump for
catchment/removal
RIDGISTORMCheck Chamber is available in a range of diameters
RIDGISTORMSEPARATE
SILT TRAPS &
CATCHPITS
LIFTING POINTS
RIDGISTORMCheck Vortex Flow
Control Chamber key benefits
Pre-fabricated under factory controlled conditions, our
RIDGISTORMACCESS
MANHOLES
1050-3000
To suit requirements
HDPE
Black with blue interior
Grade 304 Stainless Steel
HDPE is naturally resistant to most
chemicals associated with stormwater
drainage systems
• Step rungs to BS EN 13101 and ladders to
BS EN 14396
• Integral lifting points available on request
to improve Health and Safety of handling
and installation
Control Chambers are engineered to suit a range
of stormwater attenuation and infiltration systems,
providing a means of flow regulation and are used
regularly when designing to source control principles.
Element
The optional filter unit on the outlet provides a filtration
Performance
RIDGISTORMCheck Orifice Plate Flow Control Chambers
are fabricated from Ridgistorm-XL pipework, which is
manufactured to meet the material requirements of
BS EN 13476:2007 (Part 1-3).
For the full datasheets and
standard details, for both of the
RIDGISTORMCheck Chambers,
please visit our website
www.polypipe.com/toolbox
Value
PHYSICAL PROPERTIES
system for reduced maintenance.
100-3000
Vortex flow control unit to suit site
specific flow rates and head
seamless connection to pipeline
• Depths can be tailored to suit project requirements
Diameter mm
Depth
Material
Colour
Chemical resistance
Inlets/outlets mm
Hydraulic performance
500-3000
To suit requirements
HDPE
Black with blue interior
HDPE is naturally resistant to
most chemicals associated with
stormwater drainage systems
100-3000
Orifice plate flow controls to suit
site specific flow rates and head
49
FABRICATIONS
OVERVIEW
SECTION 4
www.polypipe.com/fabrications
Fabrications
RIDGISTORMCHECK
CHAMBERS
RIDGISTORMCONTROL
CHAMBERS
RIDGISTORMControl Penstock
and Valve Chambers
RIDGISTORMAccess Manholes
Where a drainage or sewer system design requires the inclusion of control devices to limit or isolate
flows, our range of RIDGISTORMControl Chambers are available with pre-installed Penstocks,
Flap Valves and Gate Valves.
Whether your project calls for stormwater, foul water or combined sewer systems, we can
manufacture high density polyethylene (HDPE) pre-fabricated manholes, to provide easy
access into and maintenance of a pipeline. RIDGISTORMAccess Manholes are utilised where
pipe runs change direction, combine, change invert level, diameter or pipe material.
RIDGISTORMAccess Manholes
key benefits
RIDGISTORMControl Penstock
and Valve Chamber key benefits
• Provides easy access for maintenance
• Manufactured to adoptable standards
• Facilitates maintenance, controls system flows and
protects the drainage system from surcharging
• Full range of accessories available including Safety
Gate Valves and Flap Valves
improve the quality of finish and eliminate wastage associated
with in-situ construction.
Applications
Our pre-fabricated RIDGISTORMControl Chambers incorporate
a range of flow control devices to limit or isolate flows
• Step rungs to BS EN 13101 and ladders to
BS EN 14396
• Integral benching
• Step rungs to BS EN 13101 and ladders to BS EN 14396
Applications
• Optional riser section
RIDGISTORMAccess Manholes are engineered
• Integral lifting points available on request to improve
for use in stormwater, foul and combined sewer
Health and Safety of handling and installation
applications to enable access to the pipework system
for inspection and maintenance. Factory installed,
within surface water, sewer and combined sewer systems.
preformed benching and channelling is available to
Typical valves include:
spring line (SHW) or soffit (SFA) depending on the
Gate Valves are used to permit or prevent the flow of water
and can isolate drainage sections. The valve opens by lifting
a wedge out of the path of the flow of water.
Flap Valves
Flap Valves are non-return hinge valves to prevent backflow
upstream. They can also be used for outflow applications
such as ponds, ditches, swales and tidal.
Penstocks
Penstocks consist of a gate which can isolate or control water
flow. The gate can also be used as a flow control device to limit
the flow of water passing through the system.
Performance
RIDGISTORMControl Penstock and Valve Chambers are
Value
PHYSICAL PROPERTIES
Diameter mm
1200-3000
Material
Colour
Loading
Chemical resistance
Inlets/outlets mm
To suit requirements
HDPE
Black with blue interior
Determined by structural design
HDPE is naturally resistant to
most chemicals associated with
stormwater drainage systems
100-3000
• Optional riser section
• Riser location ring
• Integral lifting points available on request
to improve Health and Safety of handling
and installation
Element
specification required. RIDGISTORMAccess Manholes
can be pre-fabricated with a number of features to
reduce the need for direct access into the pipe, such
as an offset channel, or maximising step landing
width, or to minimise operational Health and Safety
Depth
CHAMBER
ACCESSORIES
• Factory installed, high quality integral benching
• Lockable steel covers available
Element
LOW FLOW CHANNEL
• Depths can be tailored to suit project requirements
requirements
Gate Valves
LIFTING POINTS
seamless connection to pipeline
seamless connection to pipeline
• Chamber depths are tailored to suit project
units, manufactured in factory controlled conditions to
RIDGISTORM-X4
integral sockets as standard allowing quick and
integral sockets as standard allowing quick and
RIDGISTORMControl Chambers are typically supplied as single
THE GROWING
RIDGISTORMSEPARATE
IMPORTANCE
CHAMBERS
OF SUDS
• Multiple inlet and outlet options, supplied with
• Multiple inlet and outlet options, supplied with
Penstock
RIDGISTORMSEPARATE
SILT TRAPS &
CATCHPITS
Chain Assembly and Guardrail Assembly
• System components available include: Penstocks,
Flap Valve
RIDGISTORMACCESS
MANHOLES
risks with the pre-fabrication of Safety Chain Assembly
and Guardrail Assembly, please see page 59 for
Value
PHYSICAL PROPERTIES
Diameter mm
Depth
Material
900-3000
To suit requirements
HDPE
more information.
Colour
Compatibility
Loading
Determined by structural design
Chemical resistance
HDPE is naturally resistant to
most chemicals naturally found
in stormwater run-off and
uncontaminated ground
RIDGISTORMAccess Manholes can be integrated into
our surface water (Ridgidrain and Ridgistorm-XL)
Black with blue interior
and sewer (Polysewer, Ridgisewer and Ridgistorm-XL)
pipework systems, or engineered to connect to other
Inlets/outlets mm
100-3000
pipe materials.
fabricated from Ridgistorm-XL pipework, which is
Performance
manufactured to meet the material requirements of
RIDGISTORMAccess Manholes are fabricated from
BS EN 13476:2007 (Part 1-3).
Ridgistorm-XL pipework, which is manufactured to meet
the material requirements of BS EN 13476:2007 (Part 1-3).
50
51
FABRICATIONS
OVERVIEW
SECTION 4
www.polypipe.com/fabrications
Fabrications
RIDGISTORMCHECK
CHAMBERS
RIDGISTORMCONTROL
CHAMBERS
RIDGISTORMSeparate Catchpits
RIDGISTORMSeparate Silt Traps
Located upstream of retention, attenuation and infiltration drainage systems, RIDGISTORMSeparate
Silt Traps capture and retain silt and separate out other particles by encouraging settlement in the unit
sump, preventing ingress into sustainable drainage systems (SuDS). This range of small diameter silt
traps are standard stock items and are readily available.
Our purpose-built large diameter high density polyethylene (HDPE) pre-fabricated catchpits are
ideal for stormwater and land drainage applications and are the simplest and most cost-effective
way of separating out silt and debris, providing an easily maintainable drainage system.
RIDGISTORMSeparate
Catchpits key benefits
RIDGISTORMSeparate Silt Traps
key benefits
• Separates silt and debris from the downstream
drainage system
• Prevents the ingress of debris, silt and litter into the
• One-piece installation, off-site construction,
RIDGISTORMSeparate Catchpits are designed to separate
connection to pipeline
• Plastic or lockable steel covers available from Polypipe
Building Products
silt and other particles from stormwater, helping to
protect the downstream drainage system and local
Applications
upstream of retention, attenuation and infiltration drainage
elements to protect the ingress of silt and other particles.
SILT TRAP ASSOCIATED PRODUCTS
PVC 320mm cover
& frame (round)
320mm sealed screw down
cover & frame, includes seals
and fixing screws
UG501
PVC 320mm cover
& frame (square)
320mm square plastic cover
with PP frame, includes seals
and fixing screws
UG502
Round cover complete with seals
and fixing screws (35kN test load)
UG511
460mm silt trap
cover & frame
(round)
450mm silt trap
cover & frame
(square)
Square PP cover complete
with seals and fixing screws
(35kN test load)
Polypropylene
cover & frame
Reduced access square PP cover
and frame with seals and fixing
screws (35kN test load)
ICDC1
Silt trap side riser (215mm
effective height)
ICDR1
EPDM 110mm seal
UG488
Chamber riser
section
Silt trap sealing ring
52
Note: Polypropylene (PP)
UG512
PHYSICAL
PROPERTIES
MINI
Nominal
diameter
mm
320
460
460
Depth mm
440
1220
830
Inlet and
Outlet mm
110
(BS EN 1401-1)
160
(BS EN 1401-1)
160
(BS EN 1401-1)
250
420
280
Material
Polypropylene
Polypropylene
Polypropylene
Colour
Black chamber
Black chamber
Black chamber
Sump depth
mm
Chemical
resistance
BASIC
ADVANCED
time and costs
• Multiple inlet and outlet options, supplied with
integral sockets as standard allowing quick and
pipe systems, such as Ridgidrain and Ridgistorm-XL,
seamless connection to pipeline
Applications
For use in stormwater drainage systems typically located
delivered ready-to-install reducing installation
environment. They can be integrated into our range of
to offer a fully integrated drainage system.
CODE
CHAMBER
ACCESSORIES
to suit project-specific requirements
• Multiple inlet and outlet options, supplied with integral
DESCRIPTION
LIFTING POINTS
• Fully-welded, watertight structured wall chambers
structure
sockets as standard allowing quick and seamless
PRODUCT
RIDGISTORM-X4
LOW FLOW CHANNEL
approved for use in cess areas
• Self cleansing
Basic silt trap
Product code: PSMST160
THE GROWING
RIDGISTORMSEPARATE
IMPORTANCE
CHAMBERS
OF SUDS
• Network Rail Parts and Drawing System (PADS)
protecting downstream elements of the drainage systems
Advanced silt trap
Product code: PSMST160/15
RIDGISTORMSEPARATE
SILT TRAPS &
CATCHPITS
• Provides easy access for silt collection
• Improves water quality by removing silt, grit and litter,
Mini silt trap
Product code: PSMST110
RIDGISTORMACCESS
MANHOLES
RIDGISTORMSeparate Catchpits are pre-fabricated for
• Depths can be tailored to suit project requirements
• Step rungs to BS EN 13101 and ladders to
BS EN 14396
• Integral lifting points available on request
use in a range of stormwater systems requiring silt and
to improve Health and Safety of handling
debris separation and retention.
and installation
Performance
RIDGISTORMSeparate Catchpits are fabricated from
Element
Ridgistorm-XL pipework, which is manufactured to meet
Value
PHYSICAL PROPERTIES
the material requirements of BS EN 13476:2007 (Part 1-3).
Diameter mm
Depth
To suit requirements
Sump depth
To suit (min. 50mm)
Material
Polypropylene is Polypropylene is Polypropylene is
resistant to the resistant to the resistant to the
most chemicals most chemicals most chemicals
associated with associated with associated with
stormwater
stormwater
stormwater
drainage
drainage
drainage
systems
systems
systems
Colour
For the full RIDGISTORMSeparate
datasheets and standard details,
please visit our website
www.polypipe.com/toolbox
450–3000
Chemical resistance
Inlets/outlets mm
HDPE
Black with blue interior
HDPE is naturally resistant to
most chemicals associated with
stormwater drainage systems
100-3000
Note: For a Basic Silt Trap risers and seals are required. The bucket and filter are
easily removable from the Advanced Silt Trap to enable cleaning.
53
FABRICATIONS
OVERVIEW
SECTION 4
www.polypipe.com/fabrications
Fabrications
RIDGISTORMCHECK
CHAMBERS
RIDGISTORMCONTROL
CHAMBERS
RIDGISTORMSeparate Weir
and Baffle Chamber
RIDGISTORMSeparate Weir and Baffle Chambers can be installed within new installations or
retrofit into existing drainage systems. They are designed to provide basic silt and oil separation,
retaining these pollutants in the drainage system and protecting downstream systems.
RIDGISTORMSeparate Filter Chamber
RIDGISTORMSeparate Filter Chambers incorporate both a sump and removable filter unit on
the chamber outlet to capture silt and debris. The filter unit is easily removed for maintenance
purposes and can also be incorporated into Catchpits and Weir and Baffle Chambers.
RIDGISTORMSeparate Filter
Chamber key benefits
RIDGISTORMSeparate Weir
and Baffle Chamber key benefits
• Multiple inlet and outlet options, supplied
with integral sockets as standard allowing quick
and seamless connection to pipeline
• Tailor-made, fully-welded, watertight pre-fabricated
and Ridgistorm-XL, or even engineered to connect to other
materials to offer a fully integrated drainage system.
• Step rungs to BS EN 13101 and ladders to BS EN 14396
• Integral lifting points
RIDGISTORMSeparate Filter Chambers can be integrated
into our range of pipe systems, such as Ridgidrain and
Ridgistorm-XL, to offer a fully integrated drainage system.
Applications
for use in a range of stormwater systems requiring silt
RIDGISTORMSeparate Weir and Baffle Chambers
are pre-fabricated for use in a range of stormwater
Performance
attenuation and infiltration systems requiring ‘in-line’
RIDGISTORMSeparate Filter Chambers are fabricated from
silt and oil separation.
Ridgistorm-XL pipework, which is manufactured to meet
and debris separation.
the material requirements of BS EN 13476:2007 (Part 1-3).
Value
PHYSICAL PROPERTIES
Diameter mm
Depth
Sump depth
Material
Colour
Chemical resistance
Inlets/outlets mm
54
900-3000
To suit requirements
To suit (min. 50mm)
HDPE
For the full RIDGISTORMSeparate
datasheets and standard details,
please visit our website
www.polypipe.com/toolbox
CHAMBER
ACCESSORIES
BS EN 14396
• Integral lifting points available on request
to improve Health and Safety of handling
and installation
RIDGISTORMSeparate Filter Chambers are pre-fabricated
Applications
Element
LOW FLOW CHANNEL
• Step rungs to BS EN 13101 and ladders to
ready-to-install reducing installation time and costs
• Depths can be tailored to suit project requirements
LIFTING POINTS
requirements
• One-piece installation, off-site construction - delivered
integrated into our range of pipe systems, such as Ridgidrain
RIDGISTORM-X4
• Depths can be tailored to suit project
chambers to suit project-specific requirements
and seamless connection to pipelines
THE GROWING
RIDGISTORMSEPARATE
IMPORTANCE
CHAMBERS
OF SUDS
• Washable filter unit
drainage network
RIDGISTORMSeparate Weir and Baffle Chambers can be
RIDGISTORMSEPARATE
SILT TRAPS &
CATCHPITS
• Easily accessible removable filter
• Separates silt and oil to protect the downstream
• Multiple inlet and outlet options allowing quick
RIDGISTORMACCESS
MANHOLES
Element
Value
PHYSICAL PROPERTIES
Diameter mm
500-3000
Depth
To suit requirements
Sump depth
To suit (min. 50mm)
Material
Colour
Chemical resistance
Inlets/outlets mm
HDPE
Black with blue interior
HDPE is naturally resistant to
most chemicals associated with
stormwater drainage systems
100-3000
Black with blue interior
HDPE is naturally resistant to
most chemicals associated with
stormwater drainage systems
100-3000
55
FABRICATIONS
OVERVIEW
SECTION 4
www.polypipe.com/fabrications
Fabrications
RIDGISTORMCHECK
CHAMBERS
RIDGISTORMCONTROL
CHAMBERS
RIDGISTORM-X4 Stormwater Treatment System
RIDGISTORM-X4 is a 4-stage treatment device, used for the treatment of surface water run-off,
providing high levels of contaminant removal, including hydrocarbons and heavy metals. Utilising a
number of processes the RIDGISTORM-X4 Stormwater Treatment System consistently provides proven
levels of protection for the downstream elements of the drainage system and local environment.
1. Sedimentation
Water is induced into a radical flow within the dynamic
separator at the base of the unit, promoting sedimentation
of solid particles.
Water flows up from the separator and through removable
filter elements. The filter elements remain saturated,
minimising the risk of the filter elements clogging.
2
3. Chemical Separation
4. Oil Retention
Water is finally discharged via an oil trap assembly which
is designed to retain free floating oils in the event of
a major spill.
4
1
The RIDGISTORM-X4 Stormwater Treatment System is a low
maintenance solution for all surface water applications.
Filters have no moving parts and have an average expected
lifespan of 2 years (based on nominal usage).
RIDGISTORM-X4
PHYSICAL PROPERTIES
56
RIDGISTORM-X4
HEAVY TRAFFIC
Height mm
1985
1985
1985
Diameter mm*
980
980
980
Chamber material**
PE
PE
PE
Weight kg*
122
122
122
Recommended max.
catchment area m²
500
750
1000
Number of
Filter elements
4
4
4
Weight/element kg
54
34
34
Connections mm
200
200
200
*Unit typically supplied within a pre-fabricated chamber. However these
measurements may increase dependant on the proposed unit’s general
arrangements. **Majority of components are polyethylene (PE), however
other materials are used in the unit manufacture.
STANDARD
LIFTING
POINTS
EXTENDED
LIFTING
POINTS
HEAVY DUTY
LIFTING
POINTS
Product code
RSTLP
RSTELP
RSTHLP
LOW FLOW CHANNEL
Pipe diameter
mm
1050-1800
2100-3000
2100-3000
CHAMBER
ACCESSORIES
Safe working
load kg
1500
1500
2500
or other suitable lifting equipment will be needed
Instruction and Guidance document before commencing
with any lift of this product
• All packaging should be removed from the product prior
RIDGISTORM-X4 key benefits
• Separates and removes silt heavy particles, oil,
phosphorus and heavy metal pollutants
• Low maintenance – no moving parts
• Facilitates compliance with Water Framework Directive
• Supplied within a pre-fabricated chamber delivered to
site ready-to-install or as a stand alone unit
• Step rungs to BS EN 13101 and ladders to BS EN 14396
RIDGISTORM-X4 RIDGISTORM-X4
TRAFFIC
ROOF
LIFTING POINTS
PRODUCT
DESCRIPTION
read and understood our Ridgistorm-XL Chamber Lifting
• Treats water from roofs, car parks and roads
RIDGISTORM-X4 Stormwater Treatment Systems are fabricated
from Ridgistorm-XL pipework, which is manufactured to meet
the material requirements of BS EN 13476:2007 (Part 1-3).
RIDGISTORM-X4
• The designated competent person* must have
• Advanced 4-stage filtration system
Performance
THE GROWING
RIDGISTORMSEPARATE
IMPORTANCE
CHAMBERS
OF SUDS
to prevent the chamber swinging during the lift
RIDGISTORM-X4 is capable of cleaning surface water run-off
from roofs, car parks, roads and heavily trafficked areas.
RIDGISTORMSEPARATE
SILT TRAPS &
CATCHPITS
• For any asymmetrical chambers, additional slings
3
4-STAGE
UPWARD FILTRATION
Applications
The range of Ridgistorm-XL Lifting Points have been designed specifically to aid in the safe
handling of Ridgistorm-XL chambers when loading, off-loading and installing the products
on-site. The lifting points consist of three plastic lugs, which are pre-welded into a
Ridgistorm-XL chamber by our in-house Fabrication Team. These lugs provide external
points for the attachment of lifting accessories and can lift up to 2500kg in weight.
RIDGISTORM-XL LIFTING POINTS
2. Filtration
While passing through the filter unit, dissolved chemical
pollutants are removed through a process of adsorption,
absorption and precipitation.
Ridgistorm-XL Lifting Points
RIDGISTORMACCESS
MANHOLES
• Integral lifting points available on request to improve
Health and Safety of handling and installation
• Chamber is strong but light in weight, minimising
Health and Safety risks
For further information please
see the full RIDGISTORM-X4
datasheet available on our website
www.polypipe.com/toolbox
to any lift being carried out
• The lifting of this product must only be conducted
utilising all three or more lifting points, with additional
slings or other lifting devices where deemed necessary
Lifting points key benefits
• Installed off-site to ensure leak tightness
• 3 lifting points per chamber provide stability
during handling
• Fail-safe design
• Lifting points are external to the chambers to
reduce the Health and Safety risks of working
in confined spaces
Important
*All chamber lifts should be carried out by a ‘competent
person’ under a site specific risk assessment and lifting
plan, adhering to the ‘lifting instructions’ carried
• Can be used as anti-flotation devices to stop
the chamber floating during concrete filling
• The lugs can be removed after installation without
compromising the leak tightness of the chamber
out in our Ridgistorm-XL Chamber Lifting and
Guidance document.
Note: Polypipe are not liable for any lift carried out
by a third party.
For full details on Ridgistorm-XL
lifting points, please see our
Ridgistorm-XL Chamber Lifting
Instruction and Guidance document
which can be downloaded from
our website toolbox
www.polypipe.com/toolbox
57
FABRICATIONS
OVERVIEW
SECTION 4
www.polypipe.com/fabrications
Fabrications
RIDGISTORMCHECK
CHAMBERS
RIDGISTORMCONTROL
CHAMBERS
Ridgistorm-XL Low Flow Channel
Our Ridgistorm-XL Low Flow Channel (LFC) is ideally suited to large capacity surface water, foul and
combined sewers where a minimum self-cleansing velocity is required for dry weather flows. It is available
with a ring seal joint from 900-1800mm and with an electro-fusion joint from 900-3000mm. 150mm,
225mm and 300mm channels are available as standard to suit project specifications. Other sizes are
available, please contact our Technical Team for further information.
Ridgistorm-XL Chamber Accessories
RIDGISTORMSEPARATE
SILT TRAPS &
CATCHPITS
Guardrail Assembly Product code: RSTGR
Ridgistorm-XL Guardrail
Assemblies can be pre-installed
into our manholes and chambers,
with an outflow pipe greater than
600mm, to act as a safety barrier.
The Guardrail Assembly consists
of three components:
Low Flow Channel key benefits
• Prevents water stagnation, reduced siltation and
stooling debris and eliminates blockages
• Can be used for Ridgistorm-XL pipes from 900-3000mm
•
Guardrail attachment points
•
Pre-assembled Guardrail
•
Chain gates
Guardrail Assembly
key benefits
7th Edition and MCHW F Series
• Prevents the site workers from accidentally
falling into the outflow channel
• Chemical resistant
• Pre-fabricated into the chamber, delivered to
site as a one-piece modular unit ready to install
Manhole outflow pipes greater
than 600mm, acting as a lifeline
• Compliant with Sewers for Adoption,
into RIDGISTORMAccess
• Puncture resistant
if a worker was to accidentally
fall into the outflow pipe whilst
in the manhole or chamber.
width, to ensure a continuous linear low flow channel.
LOW FLOW CHANNEL
CHAMBER
ACCESSORIES
Safety Chain Assembly
key benefits
Assemblies are securely fixed
with the pipe without failure of welds and fixing points
‘Ridgistorm-XL LFC Alignment Jig’ to suit the channel
LIFTING POINTS
Ridgistorm-XL Safety Chain
• Ability to withstand ground movements and to move
During installation, it is necessary to use a suitable
RIDGISTORM-X4
Safety Chain Assembly Product code: RSTSC
jointed pipes
Jointing accessories
THE GROWING
RIDGISTORMSEPARATE
IMPORTANCE
CHAMBERS
OF SUDS
• Compliant with Sewers for Adoption,
• 150mm, 225mm and 300mm channels as standard
• Can be used for both sealed and electro-fusion
RIDGISTORMACCESS
MANHOLES
The Safety Chain Assembly is
For more information please see our
Ridgistorm-XL Low Flow Channel
installation guide, which can be
downloaded from our website
www.polypipe.com/toolbox
positioned as close to the end of
7th Edition and MCHW F Series
• Secured across the outflow pipe
• Prevent the site worker from being swept
down the outflow pipe whilst in the manhole
the channel as possible, allowing
• 3kN breaking strength
the worker to hold onto the
• Pre-fabricated into the chamber, delivered to
chain to prevent being carried
site as a one-piece modular unit ready to install
further into the system.
Ladders & Steps
Ladders & Steps key benefits
LFC Alignment Jig
LFC ALIGNMENT JIG
58
CHANNEL
WIDTH mm
PRODUCT CODE
150
RST150LFCJAT
225
RST225LFCJAT
300
RST300LFCJAT
Access to Ridgistorm-XL
• Ladders to BS EN 14396
chambers and manholes can be
• Step rungs to BS EN 13101
aided by incorporating
either step rungs or ladders.
• Pre-fabricated into the chamber,
delivered to site as a one-piece modular
unit ready to install
59
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
Geocellular solutions overview
PERMAVOID
SYSTEM
COMPONENTS
We have the largest range of geocellular products and systems in the market, allowing you to select the optimum
solution for surface water management and pollution control. With a choice of products for shallow or deep
excavations, our Permavoid and Polystorm systems can match your exact site specifications and loading conditions.
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAVOID
BIOMAT
PERMAFILTER
GEOTEXTILE
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
Contents
SECTION 5
Permavoid for shallow applications
Geocellular solutions overview
60 - 61
The Permavoid system
62 - 63
Permavoid applications
64 - 65
Permavoid system components
66 - 69
Permavoid 85 & 150
70
Permachannel
71
attenuation or infiltration at shallower depths.
Permavoid Biomat
72
For more information, see page 62.
Permafilter Geotextile
73
Polystorm for deep applications
Polystorm range
74 - 75
The tried and tested Polystorm range is designed to provide retention,
An 8 step guide to the Polystorm system
76 - 79
attenuation or infiltration at a variety of depths. It is ideally suited for
Polystorm Lite
80
from pedestrianised to large HGV parks.
Polystorm-R
81
For more information, see page 74.
Polystorm
82
Polystorm Xtra
83
Polystorm Access
84
Polystorm Inspect
85
Permavoid is a geocellular sub-base replacement system, which has been
specifically designed and tested to provide stormwater treatment, retention,
deeper applications and can accommodate a wide range of traffic loadings,
60
POLYSTORM
LITE
Geocellular solutions
Permavoid case studies
86 - 87
Polystorm case studies
88 - 89
POLYSTORM-R
POLYSTORM
POLYSTORM
XTRA
POLYSTORM
ACCESS
POLYSTORM
INSPECT
PERMAVOID
CASE STUDIES
POLYSTORM
CASE STUDIES
61
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
The Permavoid system
PERMAVOID
SYSTEM
COMPONENTS
Permavoid is an engineered, geocellular water management system that meets the demands of current
legislation and guidance for source control and surface water treatment. The system comprises of high-strength
recycled polypropylene modular cells, connected together using tapered ties to create a consistent structural
raft of exceptional high compressive and tensile strength, ideal for sub-base replacement.
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
Why a shallower application?
The Permavoid system key benefits
PERMAVOID
BIOMAT
Shallower attenuation or infiltration structures
are often necessary because the ground at
• Designed and tested for retention, attenuation or
infiltration at shallower depths
PERMAFILTER
GEOTEXTILE
greater depths presents a construction
• Provides effective source control
challenge, of one kind or another. This could
• Can be installed above a high water table
be due to the presence of chemicals or
• Allows water to be spread across a wide area
contamination left over from previous land
• Ideal for brownfield or contaminated sites
use, a high water table or hard rock areas.
Some drainage engineers prefer a shallower
• Provides treatment to remove silt and hydrocarbon
deposits
approach because it does not rely on expensive
• Removes the requirement for pumping stations
pumping equipment. Shallower methods also
• Oil interception at source – no need for petrol interceptors
reduce environmental impact because they
• Can be used in combination with the full range of
Polystorm geocellular solutions for deeper applications
require less excavation and fewer trips to
• Interlocking raft for rigidity and a high compressive and
tensile strength under load
transport infill and rubble to and from the
site. They are also much more versatile and
• Suitable for use beneath porous and non-porous surfaces
cost-effective than deeper solutions, as no
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
POLYSTORM
LITE
POLYSTORM-R
• Reduction in excavation depth and cost
trench supports are required and the need
for expensive, heavy plant usually required
during installation, is eliminated.
• No need for trench supports or plant to deliver and
remove trench support panels
POLYSTORM
• Can be used in conjunction with soft SuDS to help
‘make space for water’
POLYSTORM
XTRA
POLYSTORM
ACCESS
Within impervious pavements
Within pervious pavements
Within impervious pavements, Permavoid can be installed
As Permavoid can be installed as a replacement for granular
as a replacement for granular sub-base to enhance the
sub-base; the attenuation capacity of pervious pavements
attenuation capacity, due to the high void ratio of the
can be significantly increased due to the high void
Permavoid modular cell. Permachannel and Permaceptors
ratio of the Permavoid modular cell and the thickness
are used to capture water from hardstanding areas.
of traditional granular layers may be reduced in many
They treat surface water run-off and transfer the flow
instances. The water treatment efficiency of the pavement
into the adjoining Permavoid layer.
can also be significantly enhanced by the introduction of
The water treatment efficiency of the system is enhanced
with the addition of Permavoid Biomats. These have
a floating oil treatment geotextile which prevents any
excess oils and hydrocarbons entering the storage system.
62
POLYSTORM
INSPECT
PERMAVOID
CASE STUDIES
POLYSTORM
CASE STUDIES
Permafilter oil treatment geotextile at formation level to
prevent any excess oils and hydrocarbons from passing
through the storage system. This is also relevant where
pavements are designed as infiltration features.
63
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
Permavoid applications
PERMAVOID
SYSTEM
COMPONENTS
With an increasing emphasis being placed on the implementation of source control drainage solutions,
the Permavoid system provides a flexible, modular geocellular water management solution for a wide
range of applications.
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAVOID
BIOMAT
PERMAFILTER
GEOTEXTILE
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
POLYSTORM
LITE
POLYSTORM-R
Suitable for almost every project
The Permavoid system can be incorporated into the full range of traffic conditions, from domestic driveways
to HGV applications and is suitable below pervious and impervious asphaltic, block paved or concrete paved
areas. The Permavoid system complies with the requirements of BS 7533-13 and incorporates a high vertical
compressive strength of 715 kN/m2 and lateral compressive strength of 156 kN/m2.
Limited access sites
Bio-retention systems
POLYSTORM
The Permavoid system can be easily man-handled
The Permavoid system can be an effective storage
into place without any heavy lifting or off-load
and treatment solution when incorporated into
POLYSTORM
XTRA
equipment. The footprint of the structure does not
the design of rain gardens and bioretention systems
have to be square; segmented tanks can fit into
where space is limited.
POLYSTORM
ACCESS
Public open spaces
POLYSTORM
INSPECT
the available space.
Ground stabilisation
Acting as both a sub-base replacement system and
Due to their high compressive strength and bending
drainage component, the Permavoid system can give
Excavation of hard rock is usually expensive and slow.
resistance within the joints, Permavoid cells create
maximum attenuation and infiltration capabilities for
depths, require specific design and construction measures
However, Permavoid is ideal for use on sites that are underlain
a horizontal, consistent structural raft providing
both natural and artificial surfaces and be integrated
to avoid issues such as flotation of attenuation structures,
by hard rock at shallow depth as the systems can be
a stable structure.
into site-wide sustainable drainage systems more
and often prevents the use of soakaways. Anti-flotation
incorporated into the pavement construction. This invariably
and temporary dewatering measures are invariably very
avoids any net additional excavation for the drainage system.
High water tables
Excavation of hard rock
High water tables and even perched water at shallow
expensive. The Permavoid system can often provide the
effectively. The result is a sustainable development in
Soft landscaped areas
line with the DEFRA national standards for delivery of
The Permavoid system can be used to provide
sustainable drainage systems.
attenuation or infiltration solution for such projects by
Shallow outfalls
avoiding groundwater issues.
Shallow Permavoid solutions can very often avoid the need for
a swale, dry basin, pond or wetland. It can even be
Driveways
pumping that might otherwise be required with conventional
installed below soft SuDS to improve treatment and
Any domestic driveway or front garden over 5m² that
drainage or deep attention tank solutions. Pumped solutions
increase storage capacity.
is being paved must incorporate SuDS to minimise
Contaminated land
Redevelopment of brownfield sites is commonplace and issues
can be costly to install and maintain and are considered to be
of ground contamination often go together simultaneously.
environmentally unsustainable.
Permavoid structures can negate the need to excavate into
contaminated soils, a process that would otherwise incur
significant costs in on-site remediation or off-site disposal,
as well as associated environmental issues.
PERMAVOID
CASE STUDIES
pre-treatment of stormwater run-off before it enters
POLYSTORM
CASE STUDIES
the risk of flooding. The Permavoid system, used in
Multi-function and urban landscapes
conjunction with permeable paving, can help adhere
SuDS is an integral function of water sensitive
to these requirements whilst allowing a wide range
urban designs (WSUD). Permavoid offers an efficient
of landscaping options.
storage and treatment system to help achieve improved
stormwater management, particularly when incorporated
into urban retrofitting applications.
64
65
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
Permavoid system components
PERMAVOID
SYSTEM
COMPONENTS
The Permavoid system comprises of:
Permaceptor
Product code: PVSC
Permavoid Medium
Duty with Biomat
Securely links multiple layers
Product code: PSM1BM
A combined run-off collection,
Shear Connector
of Permavoid together in a
single structure.
Permavoid (85 & 150)
Permachannel
Permavoid Biomat
Product codes: PVPP85 & PVPP150
Product code: PV03001
Product code: PV150BM
Geocellular sub-base replacement
A linear treatment system that
High strength geocellular unit
system that locks together to form an
combines run-off collection, silt
containing a low density, oil treating,
interlocking raft of exceptional high
and effluent interception and
geosynthetic floating mat.
compressive and tensile strength.
water treatment functions.
See page 70
See page 71
Comprising of a low density, oil
treating geosynthetic floating mat
Product code: PV04002
silt/oil interceptor and treatment
system used with road/yard gullies.
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAVOID
BIOMAT
PERMAFILTER
GEOTEXTILE
for use with the Polystorm range of
POLYSTORM
RANGE
modular geocellular units.
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
See page 72
POLYSTORM
LITE
POLYSTORM-R
Permafoam (85 & 150)
Permatex 300
Product codes: PVPP85PF
& PVPP150PF
Product code: PV23006
Orifice Plate Flow
Control Chambers
A heavy duty, non-woven,
A pre-fabricated orifice plate flow
polypropylene, geotextile
control unit, incorporating a removable
designed to protect and separate
filter to protect the orifice.
An open celled absorbent phenolic
foam incorporated into Permavoid
geocellular units for ‘on demand’
Permafilter Geotextile
Geomembrane
Permaties
Product code: PV23002
An impermeable membrane for
Product code: PVCLIP
A non-woven, dimpled, needle -
wrapping around Permavoid
Fully interlocking tapered tie connections
punched geotextile designed for
structures to form watertight tanks.
to securely link Permavoid cells together
hydrocarbon pollution treatment.
Permavoid geocellular layers.
POLYSTORM
XTRA
POLYSTORM
ACCESS
POLYSTORM
INSPECT
irrigation or check dams.
PERMAVOID
CASE STUDIES
horizontally in a single structure and to
transfer tensile loads.
POLYSTORM
CASE STUDIES
See page 73
Our technical manual and datasheets for the
Permavoid system components can be found
on our website www.polypipe.com/toolbox
POLYSTORM
Permavoid Rainwater
Diffuser Unit
Permavoid Connectors Permavoid Capillary
A range of Spigot and Saddle
Geotextile
Product code: PV09011
Connectors allowing piped
Permavoid units encapsulated
with a 2mm mesh fabric diffuse
the collected run-off into the
connection to the
Permavoid structure.
Product code: PV23008
A heavy duty, non-woven geotextile
formulated to provide passive
irrigation to soft and landscaped areas.
surrounding granular sub-base.
66
67
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
Permavoid Modular Cells
Description
Permavoid 150 cell
Sumps, Catchpits and Orifice Plate Flow Control Chambers
Dimensions mm
Code
Permavoid 85
708 x 354 x 85
PVPP85
Permavoid 150
708 x 354 x 150
PVPP150
Permavoid Biomat
708 x 354 x 150
PV150BM
Permafoam 85
708 x 354 x 85
PVPP85PF
Permafoam 150
708 x 354 x 150
PVPP150PF
Permavoid 85 Capillary Cone
708 x 354 x 85
PVPP85CC
Permavoid Medium Duty with Biomat*
500 x 400 x 1000
PSM1BM
Description
Dimensions
Code
315mm Rainwater Downpipe Filter
Chamber with litter guard
Maximum 0.5m deep, 110mm inlet,
160mm outlet
PV05007
500mm Silt Pit Chamber
Maximum 1m deep, 300mm deep sump,
4x Spigot Connectors up to 160mm
PV05032
500mm Orifice Plate Flow Controller
Maximum 1m deep, 300mm deep sump,
4x Spigot Connectors up to 160mm
PV05033
500mm Orifice Plate Flow Controller
Maximum 1.5m deep, 300mm deep sump,
4x Spigot Connectors up to 160mm
PV05035
PERMAVOID
SYSTEM
COMPONENTS
Orifice Plate
Flow Control Chamber
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
*Please use Polystorm Shear Connectors and Clips.
PERMAVOID
BIOMAT
Permavoid Connection Accessories
Description
Shear Connector
Permaties
PERMAFILTER
GEOTEXTILE
Preformed Spigot Connectors with Weldable Membrane
Code
Description
Code
Shear Connector
PVSC
110mm Flat Rigid Spigot Tank Adaptor
PV06200
Permaties
PVCLIP
160mm Flat Rigid Spigot Tank Adaptor
PV06201
POLYSTORM
RANGE
Preformed Spigot Connector
with weldable membrane
Geotextile Wraps*
Description
Flat Tank Spigot Connections
Roll Dimensions mm
Code
Permafilter Geotextile
2.4 x 100
PV23002
110mm Flat Rigid Spigot Tank Adaptor
PV06200
Permatex 300
5.25 x 65
PV23006
160mm Flat Rigid Spigot Tank Adaptor
PV06201
Capillary Geotextile
6 x 100
PV23008
Description
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
Code
POLYSTORM
LITE
POLYSTORM-R
*Geomembranes are also available.
POLYSTORM
Permafilter Geotextile
POLYSTORM
XTRA
Saddle Connections
Description
Permachannel
Description
Permachannel
Universal
Permachannel
Connector
Code
Permachannel complete with heel guard clip grating*
PV03001
Permachannel End Cap
PV03002
Universal Permachannel Connector
PV06305
Dimensions mm
Code
Saddle Connection 110/150
110 Spigot
PV06501
Saddle Connection 110/300
110 Spigot
PV06502
Saddle Connection 160/150
160 Spigot
PV06503
Saddle Connection 160/300
160 Spigot
PV06504
POLYSTORM
ACCESS
POLYSTORM
INSPECT
Saddle Connection
*Comes with Universal Permachannel Connector, 1 per metre.
Permavoid Rainwater Diffuser Unit*
Permaceptor Interceptor Treatment System
Description
Permaceptor GullyCeptor
(not including cover or frame)
Description
Dimensions mm
Code
1062 x 708 x 300
PV04002
Permavoid Rainwater Diffuser Unit x1 with a 110mm
socket wrapped in a 2mm mesh
Dimensions mm
Code
708 x 354 x 150
PV09011
PERMAVOID
CASE STUDIES
POLYSTORM
CASE STUDIES
*Other sizes are available, please see our Permavoid Technical Manual for further information.
Permavoid Rainwater
Diffuser Unit
Permaceptor
68
69
GEOCELLULAR
SOLUTIONS
OVERVIEW
www.polypipe.com/geocellularsolutions
Geocellular solutions
SECTION 5
Permavoid 85 & 150 Product codes: PVPP85 & PVPP150
Permavoid is a geocellular interlocking system designed for shallow groundwater storage or infiltration,
to be used in place of traditional aggregate sub-base. The system has an exceptionally high compressive
and tensile strength and bending resistance, with a proprietary jointing system to create a consistent
structural raft within the pavement that is ideal for the shallow attenuation of surface water.
Permavoid 85 & 150 key benefits
•
Permavoid 85
Permavoid 150
The Permachannel functions as a combined run-off collection, silt/oil interceptor and
treatment system. The system is designed to be ideally laid with zero gradient to prevent
the development of lateral velocities, stilling sheet run-off from each sub-catchment
and encouraging silt deposition within each channel. The outlets discharge from the side
of the channel via a weir and baffle component, which separates oils and prevents the
effluent and silt from progressing beyond the channel into the rest of the drainage system.
sub-base replacement system
Permachannel key benefits
•
Stormwater attenuation and/or infiltration system
• Gravity separation of oils and silts at source
•
Used as part of a SuDS scheme to offer stormwater
• Trapped effluent naturally treated by
storage at shallow construction depths
Element
85mm
150mm
•
•
2.25kg
3kg
9kg
12kg
Length
708mm
708mm
Width
354mm
354mm
Weight per square metre
Depth
85mm
Applications
The Permavoid units are suitable for use as a stormwater
715kN/m²
attenuation and/or infiltration system. The system comprises of
Lateral
156kN/m²
single, interconnected cells which can be installed in the ground
as part of sub-base formation. Permavoid is suitable for use in
SHORT TERM DEFLECTION
Vertical
1mm per 126kN/m²
a range of applications including residential, industrial estates,
Lateral
1mm per 15kN/m²
car parks, sports pitches, roofs, basements, pedestrian areas
and rainwater harvesting.
TENSILE STRENGTH
Of a single joint
42.4kN/m²
Of a single joint at (1% secant modulus)
18.8kN/m²
Bending resistance of unit
0.71kN/m
The structural load bearing capacity of the Permavoid units
0.16kN/m
have been tested in accordance with the following European
92%
Average effective perforated surface area
52%
Performance
Standard: BS 7533-13:2009. The system’s structural design life
expectancy, based upon creep test data (tested in accordance
with CIRIA guidelines) is as follows; For lightly loaded areas
OTHER PROPERTIES
Intrinsic permeability k
such as car parks, a design life of 50 years is achievable. For areas
1.0 x 10-5
with prolonged HGV loading, a typical design life may only be
Permavoid Permatie
Ancillary
25 years, depending on the design of the pavement surfacing
Permavoid Shear Connector
Material
and structural layers over the tank.
Polypropylene (PP)
Installation standard
Hydraulic Performance
load cases, pavement construction types and thicknesses, soil
cover and ground conditions and the suitability must therefore
FREE DISCHARGE
70
0
1
2
3
4
5
Flow Rate 85mm l/m/s
4
6
7
-
-
-
Flow Rate 150mm l/m/s
8
13
15
17
19
21
be approved for each project.
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAVOID
BIOMAT
PERMAFILTER
GEOTEXTILE
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
as defined in PPG3
POLYSTORM
LITE
• 100% recyclable
Permachannel is used for stormwater collection,
POLYSTORM-R
interception and the treatment of associated
pollutants. The system comprises of single or multiple
interconnected channels appropriately located to
Element
collect surface water run-off from sub-catchments
Value
Permachannel is suitable for use in a range of
Weight per unit
applications including residential, industrial estates,
Length
1000mm
Width
150mm
Depth
210mm
car parks, sports pitches, roofs, basements, pedestrian
areas and rainwater harvesting.
Performance
with BS EN 124:1994 when installed with a concrete
bed and haunch in accordance with site specific
construction details.
Polymer concrete
Grating
Ductile iron standard
steel safe
Catchment area
Loading
Installation standard
Permachannel must be installed on a load bearing
Average effective perforated
surface area
concrete bed and haunch in accordance with site
specific construction details.
For our full range of Permavoid
datasheets and standard details,
please visit our website
www.polypipe.com/toolbox
29kg
Material
Permachannel is rated to D400 loading in accordance
Chemical resistance
POLYSTORM
POLYSTORM
XTRA
PHYSICAL PROPERTIES
of predominantly impervious or pervious pavements.
All calculations for Permavoid units are based upon site-specific
3 units wide, 1 unit deep (1.06m x 0.15m)
Gradient %
• The system complies with the regulations of
Applications
150mm
Volumetric void ratio
need for end of line petrol/oil interceptors
100% recyclable
Vertical
Bending resistance of single joint
• Can enhance water quality and eliminate the
the treatment train criteria in a SuDS scheme
SHORT TERM COMPRESSIVE STRENGTH
PERMAVOID
SYSTEM
COMPONENTS
aerobic digestion
Units are manufactured from 90% recycled
polypropylene (PP)
PHYSICAL PROPERTIES
Weight per unit
PERMAVOID
APPLICATIONS
Permachannel Product code: PVO3001
High strength, high capacity, shallow
THE
PERMAVOID
SYSTEM
POLYSTORM
ACCESS
POLYSTORM
INSPECT
PERMAVOID
CASE STUDIES
30m²
Rated to D400
Polymer concrete
POLYSTORM
CASE STUDIES
The polymer concrete
has a capillary-free,
non-porous sealed structure,
which makes it naturally
resistant to most chemicals
(i.e. petrol, oils and acids)
Effluent concentrations are below PPG3 Class I requirements.
Note: Ancillary universal channel connector 40mm diameter.
71
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
Permafilter Geotextile Product code: PV23002
Permavoid Biomat Product code: PV150BM
Permavoid Biomat is a high strength geocellular unit, designed for use with the Permavoid system,
containing a low density, oil treating, geosynthetic floating mat (biomat). The biomat floats on water
and is designed to intercept and treat any potential residual emulsified oils that may be present within
the surface water. The use of Permavoid Biomat provides additional oil retention and water treatment
capability to an underground water storage system.
Permafilter Geotextile is a non-woven, dimpled, needle-punched geotextile that has been
specifically designed for hydrocarbon pollution treatment in sustainable drainage systems
(SuDS) and other civil engineering applications.
Permafilter Geotextile
key benefits
Permavoid Biomat key benefits
of a source control SuDS and eliminates the
need for end of line petrol/oil interceptors
into Permavoid attenuation designs
• Units are manufactured from 90% recycled
propropylene (PP)
of the installation
Installation standard
All calculations for Permavoid Biomat units are based upon
thickness, soil cover and ground conditions and the suitability
Applications
must therefore be approved for each project.
Permafilter Geotextile is suitable for use in a range of
Value
Weight per unit
Length
708mm
Width
354mm
Depth
150mm
and/or infiltration system. The system comprises single,
interconnected cells which can be installed in the ground as
part of a sub-base formation. Permavoid Biomat is suitable for
use in a range of applications including residential, industrial
estates, car parks, sports pitches, roofs, basements, pedestrian
areas and rainwater harvesting.
Performance
3kg
SHORT TERM COMPRESSIVE STRENGTH
Vertical
715kN/m²
Lateral
156kN/m²
SHORT TERM DEFLECTION
Vertical
1mm per 126kN/m²
Lateral
1mm per 15kN/m²
TENSILE STRENGTH
42.4kN/m²
Of a single joint at (1% secant modulus)
18.8kN/m²
units have been tested in accordance with the following
Bending resistance of unit
0.71kN/m²
European Standard: BS 7533-13:2009. The system’s structural
Bending resistance of single joint
0.16kN/m²
design life expectancy, based upon creep test data (tested
Volumetric void ratio
92%
in accordance with CIRIA guidelines) is as follows: For lightly
Average effective perforated surface area
52%
The structural load bearing capacity of the Permavoid Biomat
loaded areas such as car parks, a design life of 50 years is
OTHER PROPERTIES
achievable. For areas with prolonged HGV loading, a typical
Intrinsic permeability (k)
design life may only be 25 years, depending on the design
Oil retention
56g/m²
of the pavement surfacing and structural layers over the tank.
Effluent discharge at max. oil loading
10ppm
Ancillary
72
Minimum 1.0 x 10-5
PHYSICAL PROPERTIES
Weight per unit
300g/m
100m
swales, sports pitches, car parks, roofs, basements,
Roll width
2.4m
pedestrian areas and rainwater harvesting.
Roll weight
72kg
2
Tensile strength EN10319 (md/cmd)
9/12kN/m
The dimpled geotextile comprises of a proprietary
Static puncture (CBR test) EN12236
1575N
blend of polyester fibres that incorporates hydrophilic
(water attracting and oil repellent) and hydrophobic
(oil attracting and water repellent) properties to achieve
HYDRAULIC PROPERTIES
Water permeability EN ISO 11058
57 l/m²/s
of retaining oil contamination ranging from daily car
Air permeability
drip losses, up to catastrophic spillages i.e. originating
Max. oil retention
6l/10m²
Effluent discharge at max. oil loading
10ppm
are biodegraded by naturally occurring microorganisms
Overlaps shall be a minimum of 300mm or heat sealed.
Ensure geotextile is clean and debris free before
installing Permavoid.
POLYSTORM
POLYSTORM
ACCESS
POLYSTORM
INSPECT
Material
1000 l/m²/s
PERMAVOID
CASE STUDIES
Modified polyester
POLYSTORM
CASE STUDIES
Laying generally
Permafilter will be laid to suit site specific requirements.
POLYSTORM-R
OTHER PROPERTIES
superior oil retention. Permafilter Geotextile is capable
from car oil-sump failures. The entrapped hydrocarbons
POLYSTORM
LITE
POLYSTORM
XTRA
MECHANICAL PROPERTIES
Performance
providing a self-cleansing mechanism.
Of a single joint
Value
Roll length
applications including residential, industrial estates,
PHYSICAL PROPERTIES
component suitable for use as a stormwater attenuation
Element
site-specific load cases, pavement construction types and
Element
Permavoid Biomat units are an effective water treatment
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
• Designed to be self-maintaining for the life
• 100% recyclable
Applications
POLYSTORM
RANGE
• Enhances water quality when used as part
• Same size as Permavoid so can be incorporated
and aerobic digestion
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAFILTER
GEOTEXTILE
• 100% recyclable
• Pollutant-intercepting floating mat
• Self maintaining, degrades residual oils by absorption
PERMAVOID
SYSTEM
COMPONENTS
• Removes pollutants by biodegradation
residual hydrocarbons
allowing optimum conditions for aerobic degradation
PERMAVOID
APPLICATIONS
PERMAVOID
BIOMAT
• Captures residual hydrocarbons
• Secondary treatment phase for potential
• Floating medium maintained at air-water interface
THE
PERMAVOID
SYSTEM
For our full range of Permavoid
datasheets and standard details,
please visit our website
www.polypipe.com/toolbox
Permavoid Permatie
Permavoid Shear Connector
73
GEOCELLULAR
SOLUTIONS
OVERVIEW
www.polypipe.com/geocellularsolutions
Geocellular solutions
SECTION 5
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
Polystorm range
The Polystorm geocellular range is designed to provide retention, attenuation or infiltration at
a variety of depths. It is ideally suited to deeper applications and can accommodate a wide range
of traffic loadings, from pedestrianised areas to large HGV parks.
PERMAVOID
SYSTEM
COMPONENTS
Polystorm system key benefits
• 95% void ratio providing greater water storage
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
capacity and reduced excavation and disposal costs
• BBA approved for Polystorm Lite, Polystorm-R
and Polystorm. BBA pending for Polystorm Xtra
PERMAVOID
BIOMAT
• Modular units allow flexibility of shape, making
Clip
it ideal for shallow excavation systems, narrow
PERMAFILTER
GEOTEXTILE
strips or for use in restricted areas
For connecting cells
Polystorm
modular cell
together horizontally
• Light weight yet robust, affording excellent
Health and Safety and installation benefits
POLYSTORM
RANGE
• Unique rounded corners make it easy to handle
Shear Connector
For connecting cells
together vertically
and reduce likelihood of punctures to membranes
• 100% recyclable at the end of its useful life
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
• Spans from 20 tonnes per square metre load
bearing capacity, up to a maximum of 80 tonnes
per square metre load bearing capacity
• The range can be designed for non-trafficked,
POLYSTORM
LITE
trafficked or heavily trafficked applications
• Suitable for retention, attenuation and
POLYSTORM-R
infiltration systems
• Up to 60 year design life
POLYSTORM
• Polystorm modular cells manufactured
POLYSTORM
XTRA
from polypropylene
Pipe
connection
location
• Polystorm Access manufactured from MDPE
POLYSTORM
ACCESS
95% void ratio
Polystorm modular cells are joined together with Clips and Shear Connectors to provide water storage structures. Each cell has a
POLYSTORM
INSPECT
95% void ratio to provide a highly efficient, SuDS compliant water retention, attenuation or infiltration solution. For projects
that have high sustainability targets, Polystorm is also available manufactured from recycled materials.
PERMAVOID
CASE STUDIES
Polystorm systems
POLYSTORM
CASE STUDIES
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
74
Polystorm Lite
Landscaped/pedestrian
areas
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
Polystorm-R
Trafficked
areas
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
Polystorm
Polystorm Xtra
Polystorm Inspect
Polystorm Access
Trafficked
areas
Heavy trafficked, deep
Lateral maintenance
Vertical maintenance
or reduced cover areas
and inspection
and inspection
75
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
An 8 step guide to a total Polystorm system
PERMAVOID
SYSTEM
COMPONENTS
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAVOID
BIOMAT
PERMAFILTER
GEOTEXTILE
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
1
2 Select access if maintenance and inspection is required
Select modular cell
2A
Polystorm Access (see page 84 for product codes)
Polystorm Access provides a 1m x 0.5m vertical shaft within a Polystorm geocellular
structure to enable surface access for remote camera inspection and maintenance
activities such as flushing and rodding. The system consists of a 500mm diameter
shaft which extends from surface level to the top of a Polystorm structure, at which
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
Polystorm Lite
Product code:
PSM2
Landscaped/pedestrian
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
Polystorm-R
Product code:
PSM1A
Trafficked
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
Polystorm
Polystorm Xtra
Product code:
PSM1
Product code:
PSM3
POLYSTORM
INSPECT
cell solutions. Its primary purpose is to provide a tunnel along the length of a fully
The Polystorm cell, made
specifically designed for
cell for trafficked and
of virgin material, has a
Designed for use in deeper
non-trafficked applications.
loaded applications at greater
44 tonnes per square metre
burial depths for heavily
With a 20 tonnes per square
depths has a compressive
compressive strength
trafficked applications,
metre compressive strength,
strength of 61 tonnes
and is ideally suited for
Polystorm Xtra has a
it will support general
per square metre and the added
trafficked and loaded areas
compressive strength of
maintenance vehicles such
benefits of a higher recycled
at greater depths.
83 tonnes per square metre,
as grass cutters. Polystorm Lite
material content. Ideally suited
See page 82
making it suitable for use
is typically used in landscaped
for housing, commercial and
in very heavily trafficked
and pedestrianised areas at
infrastructure projects.
areas, deep applications and
where reduced cover is required.
See page 81
POLYSTORM
XTRA
Polystorm Inspect – Product code: PSM4
The Polystorm Inspect cell is complementary to the Polystorm range of modular
The standard Polystorm
POLYSTORM
POLYSTORM
ACCESS
Heavy trafficked, deep
Polystorm Lite has been
See page 80
2B
POLYSTORM-R
within the Polystorm structure.
Trafficked
or reduced cover
lower depths.
point a turret provides an interface between the shaft and the inspection chamber
POLYSTORM
LITE
installed Polystorm structure to enable access for inspection and maintenance.
Polystorm Inspect is a high strength thermoplastic cell which evenly distributes its
PERMAVOID
CASE STUDIES
load through the Polystorm structure. The tunnel end is left open by default but
the unit can be closed off if required by clipping into place the moulded end plate.
For purposes of identification the cell features a yellow centre section and end plate.
See page 85
POLYSTORM
CASE STUDIES
3 Select if treatment is required
See page 83
Permavoid Medium Duty with Biomat – Product code: PSM1BM
Connection accessories
Comprising of a high strength, low density, oil treating geosynthetic floating mat
for use with the Polystorm range of modular geocellular units. For multi-stage oil
• Shear Connectors
Product code: PSMSC
• Clips
Product code:
PSMCLIP
76
• Brick Bond Connectors
Product code: PSMBBSC
interception the Permavoid Medium Duty with Biomat can be used in conjunction
with Permachannel (linear treatment) or a pre-fabricated RIDGISTORMSeparate
Weir and Baffle Chamber (point treatment).
77
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
8 step guide continued...
7 Associated upstream products
7A
4 Select wrap
PERMAVOID
SYSTEM
COMPONENTS
Ridgidrain
Ridgidrain can be utilised within a Polystorm system by allowing captured
surface water to enter the attenuation or infiltration tank.
Geomembrane for retention & attenuation
An impermeable membrane for wrapping around geocellular structures to form watertight
tanks. This is then wrapped in a geotextile which protects the geomembrane during installation.
7B
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
RIDGISTORMSeparate Chambers
RIDGISTORMSeparate Chambers are self-cleaning and prevent the ingress of debris, silt, organic and even other
particles into the Polystorm structure, extending its useful life.
Permafilter Geotextile for infiltration Product code: PV23002
This geotextile has been specifically designed to remove hydrocarbon pollution, treating
the captured water before infiltrating it into the ground for treatment and infiltration.
See page 73
Permatex 300 for infiltration or protection Product code: PV23006
A non-woven protective geotextile that can be used for soakaway infiltration solutions
Silt Traps
Catchpits
Small diameter (320-460mm)
Larger diameter (450-3000mm)
Weir and Baffle Chambers
& Filter Chambers
Silt traps are available from
Catchpits are available from the
In addition to silt traps and catchpits,
the RIDGISTORMSeparate
RIDGISTORMSeparate range.
we also offer RIDGISTORMSeparate
Silt Traps range.
or to wrap a geocellular tank before a geomembrane is installed for added protection.
PERMAVOID
BIOMAT
Weir and Baffle Chambers and
See page 53
PERMAFILTER
GEOTEXTILE
POLYSTORM
RANGE
RIDGISTORMSeparate Filter Chambers
See page 52
with additional treatment features.
See page 54 - 55
5 Flange Connections
A flange adaptor is attached at both the inlet and outlet points to allow water to enter
and exit the tank.
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
POLYSTORM
LITE
POLYSTORM-R
5a. Polystorm cells with Flange Connections to Ridgidrain drainage pipes:
PSMCRD225 (225mm), PSMCRD300 (300mm), PSMCRD375 (375mm)
POLYSTORM
5b. Polystorm Inspect cells with Flange Connections to Ridgidrain
POLYSTORM
XTRA
drainage pipes: PSM4CRD225 (225mm), PSMCRD300 (300mm)
Flange Adaptor
to EN1401
Polystorm cell
with Drainage
Flange Connection
5c. Flange Adaptor to EN1401: PSMFA110 (110mm), PSMFA160 (160mm)
5d. Flange Adaptor to Ridgidrain: PSMFA150 (150mm),
8A
Every attenuation tank requires at least one vent to maximise hydraulic performance, reduce
stress on encapsulating geomembranes and avoid stagnant water. This can be done by installing
either a Vent Cowl or a connection pipe to vent air directly into an upstream chamber.
Vent Cowl
6B
BS EN1401-1 pipe
6C
RIDGISTORMCheck
Plate Flow Control Chambers
drain away stored water from
for precise control of site
a Polystorm attenuation tank.
discharge rates.
See page 48
To vent air above
Product code:
RD150X6PE
chambers which feature ‘in-line’
ground.
For ventilation into
the upstream chamber.
Ridgidrain
Ridgidrain can be utilised to
RIDGISTORMControl
Product code:
UG430
8B
A choice of Vortex or Orifice
150mm
Ridgidrain pipe
Product code:
SCV40
POLYSTORM
INSPECT
8 Associated downstream products
PSMFA450 (450mm), PSMFA600 (600mm)
6 Venting
6A
POLYSTORM
ACCESS
PSMFA225 (225mm), PSMFA300 (300mm), PSMFA375 (375mm),
PERMAVOID
CASE STUDIES
POLYSTORM
CASE STUDIES
Pre-fabricated structured wall
system components such as
penstocks, gate valves or flap
valves to control system flows
and facilitate maintenance.
See page 50
78
79
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
Polystorm Lite Product code: PSM2
Polystorm Lite has been specifically designed for non-trafficked applications such as landscaped areas,
pedestrianised areas or public open spaces. With a compressive strength of up to 20 tonnes/m², it is
able to support general maintenance vehicles such as grass cutters. Polystorm Lite can be used for
retention, attenuation and infiltration applications.
Polystorm Lite key benefits
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
Polystorm-R Product code: PSM1A
Polystorm-R has been designed to provide retention, attenuation or infiltration in trafficked
and loaded areas. It has a 61 tonnes/m² compressive strength and is manufactured from over
90% recycled material content.
BRITISH
BOARD OF
AGREMENT
geomembrane or geotextile
• BBA approved
• BBA approved
• Visual and maintenance access can be achieved
• Can be used as part of a value engineered
when used in conjunction with Polystorm Access
TECHNICAL SPECIFICATION OVERVIEW
hybrid system with Polystorm-R, Polystorm
Element
and Polystorm Xtra
TECHNICAL SPECIFICATION OVERVIEW
Width
0.5m
Depth
0.4m
Total volume
0.2m3
Unit weight
Unit storage volume
Vertical compressive strength
• Integrated inlet and outlet
• 3D flow throughout the structure
7kg
0.19m3 (190 litres)
Void ratio
95%
Maximum 200kN/m2 **
40kN/m2
Product Code
• Integrated inlet and outlet
Value
PSM1A*
Length
1m
Width
0.5m
• 95% void ratio
Depth
0.4m
• 100% recyclable
Total volume
0.2m3
Unit weight
9kg (approx)
• 50 years creep limited life expectancy
Unit storage volume
Void ratio
Lateral compressive strength
63kN/m2 **
Short-term lateral deflection
6.4kN/m2 per mm
Short-term vertical deflection
60kN/m2 per mm
Short-term lateral deflection
4.4kN/m2 per mm
Estimated long term vertical
deflection (creep)
0.2798 Ln (design life in hrs)
+0.485 [Based on an applied
test load = 162 kN/m2] Creep
data limit 60 years
Non-trafficked
2.5m***
* Each unit includes 4 Clips and 2 Shear Connectors.
** Compressive strength at yield, maximum recommended value
for design purposes.
*** Based on ground conditions being dense sand and gravel with no
groundwater present, using the calculation methodology detailed within
CIRIA C680 (2008). Where ground conditions differ, please consult our
water management solutions Technical Department on
+44 (0) 1509 615100.
For our full Polystorm Lite
datasheet, please visit our website
www.polypipe.com/toolbox
Estimated long term lateral
deflection (creep)
POLYSTORM
POLYSTORM
ACCESS
POLYSTORM
INSPECT
95%
Vertical compressive strength
Maximum burial depths:
POLYSTORM-R
• 95% void ratio
0.19m3 (190 litres)
43kN/m2 per mm
**
POLYSTORM
LITE
POLYSTORM
XTRA
Short-term vertical deflection
Maximum
• 3D flow throughout the structure
• 60 years creep limited life expectancy
610kN/m2
Lateral compressive strength
80
and Polystorm Xtra
• Can be used as part of a value engineered
1m
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
hybrid system with Polystorm Lite, Polystorm
Note: Exact colour may vary due to recycled material.
Value
Length
POLYSTORM
RANGE
applications/schemes with a suitable
non-loaded applications
PSM2*
PERMAFILTER
GEOTEXTILE
• Ideal for retention, attenuation or infiltration
• Designed for landscaped, pedestrian or other
Product code
• Made from specially selected and controlled
• Compressive strength of 61 tonnes/m2
or geotextile
Element
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
• Environmentally friendly, sustainable solution
applications with a suitable geomembrane
and Inspect
PERMAVOID
SYSTEM
COMPONENTS
PERMAVOID
BIOMAT
recycled materials
• Ideal for retention, attenuation or infiltration
PERMAVOID
APPLICATIONS
Polystorm-R key benefits
CERTIFICATE No. 06/4297
• Compressive strength of 20 tonnes/m2
THE
PERMAVOID
SYSTEM
**
PERMAVOID
CASE STUDIES
POLYSTORM
CASE STUDIES
1.0192 Ln (design life in hrs)
-3.864 [Based on an applied test
load = 30.8 kN/m2] Creep data
limit 60 years
Note: Polystorm-R is ideal for use in trafficked and pedestrian
applications subject to a structural design check and suitable
installation conditions.
* Each unit includes 4 Clips and 2 Shear Connectors.
** Compressive strength at yield, maximum recommended value
for design purposes.
For our full Polystorm-R
datasheet, please visit our website
www.polypipe.com/toolbox
81
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
Polystorm Xtra Product code: PSM3
Polystorm Product code: PSM1
Polystorm has a 44 tonnes/m² compressive strength and is ideally suited for retention,
attenuation or infiltration under trafficked or loaded areas such as car parks and housing
and commercial developments.
Designed for use in deeper burial depths, heavily trafficked applications and where areas of
reduced cover are required, Polystorm Xtra has a compressive strength of 83 tonnes/m2, making
it suitable for use in very heavily trafficked areas like lorry parks and industrial access roads.
Polystorm key benefits
BRITISH
BOARD OF
AGREMENT
CERTIFICATE No. 06/4297
• Compressive strength of 44 tonnes/m²
• Ideal for retention, attenuation or infiltration
PSM1*
Length
1m
Width
0.5m
Depth
0.4m
Total volume
0.2m3
Unit weight
Unit storage volume
9kg
0.19m3 (190 litres)
Void ratio
95%
Vertical compressive strength
Maximum 440kN/m2 **
Lateral compressive strength
Maximum 63kN/m2 **
Short-term vertical deflection
83kN/m2 per mm
Short-term lateral deflection
4.2kN/m2
per mm
Maximum burial depths:
Light trafficked
3.7m***
Non-trafficked
3.8m***
* Each unit includes 4 Clips and 2 Shear Connectors.
** Compressive strength at yield, maximum recommended value for
design purposes.
*** Based on ground conditions being dense sand and gravel with
no groundwater present, using the calculation methodology detailed
within CIRIA C680 (2008). Where ground conditions differ, please
consult our water management solutions Technical Department on
+44 (0) 1509 615100.
For our full Polystorm datasheet,
please visit our website
www.polypipe.com/toolbox
82
• Compressive strength of 83 tonnes/m²
PERMAFILTER
GEOTEXTILE
• Designed for heavy trafficked conditions
which require shallow excavations or deep
• Visual and maintenance access can be achieved
burial depths
• Can be used as part of a value engineered
and Inspect
Product code
PERMAVOID
BIOMAT
• BBA approved
when used in conjunction with Polystorm Access
TECHNICAL SPECIFICATION OVERVIEW
Element
• Can be used as part of a value engineered hybrid
• Integrated inlet and outlet
• 3D flow throughout the structure
• 95% void ratio
• 100% recyclable
• 50 years creep limited life expectancy
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
Polystorm Xtra key benefits
suitable geomembrane or geotextile
• Designed for trafficked and loaded conditions
system with Polystorm Lite and Polystorm Xtra
PERMAVOID
SYSTEM
COMPONENTS
infiltration applications/schemes with a
or geotextile
Value
PERMAVOID
APPLICATIONS
• Ideal for retention, attenuation or
applications with a suitable geomembrane
Element
THE
PERMAVOID
SYSTEM
Value
TECHNICAL SPECIFICATION OVERVIEW
Product code
Length
PSM3*
1m
Width
0.5m
Depth
0.21m
Total volume
0.105m3
Unit weight
6kg
Unit storage volume
Void ratio
0.0986m3 (98 litres)
94%
Vertical compressive strength
Maximum 834kN/m2 **
Lateral compressive strength
Maximum 93kN/m2 **
Short-term vertical deflection
97.8kN/m2 per mm
Short-term lateral deflection
7.1kN/m2 per mm
Maximum burial depths:
Heavy trafficked
4.8m***
Light trafficked
5.3m***
5.45m***
Non-trafficked
* Each unit includes 4 Clips and 2 Shear Connectors.
hybrid system in non-loaded and light traffic
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
applications with Polystorm Lite,
Polystorm-R and Polystorm
• Installed with blue lid facing down for
increased strength
POLYSTORM
LITE
POLYSTORM-R
• Undergone testing in accordance
to BBA certification
• Integrated inlet and outlet
• 3D flow throughout the structure
POLYSTORM
POLYSTORM
XTRA
• 94% void ratio
• 100% recyclable
POLYSTORM
ACCESS
POLYSTORM
INSPECT
PERMAVOID
CASE STUDIES
** Compressive strength at yield, maximum recommended value
for design purposes.
*** Based on ground conditions being dense sand and gravel
with no groundwater present, using the calculation methodology
detailed within CIRIA C680 (2008).
Where ground conditions differ, please consult our
water management solutions Technical Department on
+44 (0) 1509 615100.
POLYSTORM
CASE STUDIES
For our full Polystorm Xtra
datasheet, please visit our website
www.polypipe.com/toolbox
83
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions
Polystorm Access Product codes: See chart below
Polystorm Access provides a 1m x 0.5m shaft within a Polystorm geocellular structure to enable surface
access for remote camera inspection and maintenance activities, such as flushing and rodding.
PERMAVOID
APPLICATIONS
Polystorm Inspect Product code: PSM4
The Polystorm Inspect cell is complementary to the Polystorm range of modular cell solutions.
Its primary purpose is to provide a tunnel along the length of a fully installed Polystorm
structure to enable access for inspection and maintenance.
The system consists of a 500mm diameter shaft which extends from surface
level to the top of a Polystorm structure, at which point a turret provides an
Polystorm Inspect is a high strength, thermoplastic cell
interface between the shaft and the inspection chamber within the Polystorm
THE
PERMAVOID
SYSTEM
PERMAVOID
SYSTEM
COMPONENTS
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
which evenly distributes its load through the Polystorm
structure. At the bottom of the chamber, a base unit interlocks with the
PERMAVOID
BIOMAT
structure. The tunnel end is left open by default but the
surrounding layer of Polystorm cells whilst supporting the geomembrane.
unit can be closed off if required by clipping into place the
A 350mm reduced access shaft cap is provided to comply with inspection
PERMAFILTER
GEOTEXTILE
moulded end plate. For purposes of identification, the cell
chamber regulations.
features a yellow centre section and end plate.
Polystorm Access is suitable for use with Polystorm Lite, Polystorm-R,
Polystorm and Polystorm Xtra and may be combined with Polystorm
Inspect for full length remote inspection and maintenance.
Polystorm Access key benefits
•
Meets minimum 450mm width requirement for inspection chamber
access, with 350mm reduced access where regulations dictate
•
Polystorm Inspect key benefits
Please note: The Polystorm Access turret and base assembly
are black. They are shown blue for illustration purposes.
Polystorm Access Reduced
Access Shaft Cap
Ø 500mm
Polystorm
Access Shaft
Multiple inspection configurations can be achieved when
Ø 500mm
Ridgidrain Seal
Manufactured from polyethylene for light weight,
ease of handling and high strength
•
for inspection and maintenance, i.e. jetting
and rodding
Sustainability: All components 100% recyclable after use
Polystorm
Access Turret
POLYSTORM-R
0.5m
• Large access tunnel (height 320mm and width
vision while maintaining the system’s structural
performance
• High strength to weight ratio
• Light weight cell allows easier handling
maintenance easier
• Polystorm Inspect cells with 225mm or 300mm
inlets are available (PSM4CRD225 or
PSM4CRD300)
For our full Polystorm Access
datasheet and installation guide,
please visit our website
www.polypipe.com/toolbox
POLYSTORM
LITE
Width
the overall structure making inspection and
Polystorm Access
Base Jointer
PSM4
the unit
• The tunnel restricts the dissipation of silt in to
Polystorm Access
Base Unit
Product code
1m
as the Polystorm range
84
TECHNICAL SPECIFICATION OVERVIEW
Length
• Utilises the same Shear Connectors and Clips
Polystorm Access
Base Connector
Polystorm Inspect*
greater stormwater flow distribution within
and reduced Health and Safety risk
* PSMA-B2 includes:
Polystorm Access Base Unit Qty: 2
Base Jointer Qty: 2
Base Connector Qty: 2
Seal Qty: 2
Unit type
• Can be used with Polystorm Lite, Polystorm-R
172mm nominal) – allows maximum field of
used in conjunction with Polystorm Inspect
•
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
the middle of the tank to provide access
• Tunnel can be used as a flow inlet track achieving
Base unit provides smooth transition between Polystorm
Inspect units
•
• Creates a horizontal tunnel running through
and Polystorm
Integrated solution; can be used with Polystorm Inspect
to monitor internal volume of geocellular structure
•
POLYSTORM
RANGE
Depth
0.4m
POLYSTORM
Total volume
0.2m3
Unit weight
11.6kg*
POLYSTORM
XTRA
Cube storage volume
0.188m3 (188 litres)
Volumetric void ratio
94%
POLYSTORM
ACCESS
Minimum 440kN/m2
POLYSTORM
INSPECT
Vertical compressive
strength at yield
Lateral compressive
strength at yield
Short-term vertical deflection
Estimated long term vertical
deflection (creep)
Minimum 63kN/m2
Minimum 70.1kN/m2
per mm
PERMAVOID
CASE STUDIES
0.6113Ln (design life in hrs)
Note: The table above is applicable to PSM4 without the end plate.
* Approximate weight.
POLYSTORM
CASE STUDIES
For our full Polystorm Inspect
datasheet, please visit our website
www.polypipe.com/toolbox
85
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions - Permavoid case studies
Case study – Coronation Street
Case study – Newcastle City Council
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
PERMAVOID
SYSTEM
COMPONENTS
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAVOID
BIOMAT
PERMAFILTER
GEOTEXTILE
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
POLYSTORM
LITE
POLYSTORM-R
POLYSTORM
A shallow stormwater management system
using Permavoid was specified for use as
part of the construction of the new
Coronation Street set
Polypipe supplied its Permavoid
products to Newcastle City Council
for a DEFRA funded flood alleviation
scheme at Acomb Crescent, Fawdon
As the system is designed for shallow applications, the
Permavoid was the ideal choice for the project because the
The housing development had previously flooded during
prevented from entering the system by a non-return
existing site was brownfield with a high water table and
heavy rainfall due to interaction between surface water
valve on the outlet.
shallow outfall and our system was capable of providing
sewers and the water level in the nearby Ouseburn River.
Acomb Crescent is an area which is particularly prone
an innovative shallow solution. The project saw 28 separate
To help prevent future flooding, our Permavoid system
to flooding, with limited available space for a solution.
Permavoid attenuation tanks installed throughout the site,
was installed under a recreational area between a road
Our Permavoid system was ideal for this project and
providing a combined storage capability of 420,000 litres.
and the river.
our Technical Team were on hand to design a bespoke
High strength cells were combined with strategically located
The water management solution comprised of a
solution for the client.
Permachannel and Permavoid Biomat cells that capture, treat,
Permavoid shallow geocellular system, which featured
Using Permavoid products on this project not only
store and control rainwater discharge at source. The system
the use of Permavoid Biomat. Permavoid Biomat was
enabled us to provide an effective drainage solution,
also incorporates a unique jointing mechanism that forms an
incorporated into the design in order to trap and retain
but also helped to ensure that the water is returned
interlocking ‘raft’ that supports structural loads across the
any residual and emulsified oils that may be present in
to the watercourse in a clean, unpolluted form.
heavily trafficked areas of the Coronation Street set. The
surface water from the road before discharging directly
shallow depth of the solution not only negated the need for
into the river.
pumping stations, it also reduced the need for temporary
works, which in turn reduced installation and labour costs as
well as Health and Safety risks.
POLYSTORM
XTRA
burial depths could be tightly controlled to ensure the
optimum attenuation performance was achieved.
The units provide storage until river levels fall and
gravity discharge can begin again. River water is
POLYSTORM
ACCESS
POLYSTORM
INSPECT
PERMAVOID
CASE STUDIES
POLYSTORM
CASE STUDIES
As the surface water enters the Permavoid attenuation
system through kerb drainage, the Permavoid cells had
to be installed below the level of the road at the same
time as being above the normal river level.
86
87
GEOCELLULAR
SOLUTIONS
OVERVIEW
SECTION 5
www.polypipe.com/geocellularsolutions
Geocellular solutions - Polystorm case studies
Case study – East Kent College
Case study – David Wilson Homes
THE
PERMAVOID
SYSTEM
PERMAVOID
APPLICATIONS
PERMAVOID
SYSTEM
COMPONENTS
PERMAVOID
THE
GROWING
85 & 150
IMPORTANCE
OF SUDS
PERMACHANNEL
PERMAVOID
BIOMAT
PERMAFILTER
GEOTEXTILE
POLYSTORM
RANGE
AN 8 STEP
GUIDE TO THE
POLYSTORM
SYSTEM
POLYSTORM
LITE
POLYSTORM-R
POLYSTORM
POLYSTORM
XTRA
Polypipe tops the class in new
College Development
A new centre for Environmental Technologies, at East Kent
College, has benefited from one of our bespoke Polystorm
geocellular drainage solutions. Working closely with
groundworker Stevens Construction, our Water Management
The soakaway tank is used to store surface water collected
from the new study centre and disperse it at an even rate
into the surrounding soil. Polystorm Access and Polystorm
Inspect products feature tunnels specifically designed
to allow access to be built into a Polystorm geocellular
structure, for remote camera inspection and maintenance
David Wilson Homes’ large-scale Ashcroft Place
activities when required.
development in Thundersley, Essex, required a bespoke
Solutions Team created a Polystorm infiltration structure
Both products were used in conjunction with each other
underneath a car park of the College’s new building.
to provide horizontal and vertical access simultaneously.
Our Polystorm Access and Inspect products were used
in conjunction with Polystorm-R modular cells to create
a 96m3 structure.
Polypipe experts helped David Wilson
Homes gain Section 104 approval for
its new residential development in Essex
The light weight nature of our plastic products meant that
the site’s lack of vehicle access did not prove an issue as the
Polystorm cells could be moved onto site easily.
sustainable drainage systems (SuDS) to meet Section 104
requirements. We were able to provide an effective and
A total of 2,790 Polystorm-R Cells were used to create 5
separate attenuation tanks for the site, with a combined
capacity to store up to 558m³ of stormwater.
Ridgistorm-XL pipes in 750mm and 900mm diameters
with 1200mm diameter Ridgistorm-XL pipes installed
by the side of the road to form a bespoke multi-leg
We designed and manufactured Ridgistorm-XL in
a variety of stiffness classes in order to overcome the
approval from the local water authority.
issue of varying loading and ground conditions. Taking
Chamber were all utilised on the site, forming a number
PERMAVOID
CASE STUDIES
pre-fabricated attenuation tank.
Contractor J L Knight, which quickly gained Section 104
pipe and a RIDGISTORMCheck Vortex Flow Control
POLYSTORM
INSPECT
were utilised as single straight runs under the road,
easy to install drainage solution for the project’s Main
Polystorm-R modular cells, Ridgistorm-XL large diameter
POLYSTORM
ACCESS
POLYSTORM
CASE STUDIES
this approach and by combining this with Polystorm-R
cells, means that the site is now protected against both
1 in 30 year and 1 in 100 year storm events.
of attenuation tanks to store surface water and then
The completed Ridgistorm-XL large diameter pipe
gradually release it back into the sewer system.
system has a total length of 650m and was designed in
accordance with the Specification for Highway Works
and Sewers for Adoption.
88
89
RAINWATER
HARVESTING
OVERVIEW
SECTION 6
www.polypipe.com/rainwaterharvesting
Rainwater harvesting
RAINSTREAM
Rainwater harvesting overview
Climate change and population growth are reshaping how we think about rainwater.
With UK temperatures predicted to rise over the next 70 years, climate change is driving
the need for solutions to retain and reuse rainfall and surface water.
THE GROWING
IMPORTANCE
OF SUDS
Rainwater harvesting key benefits
•
Tank sizes from 1,500 to 300,000 litres (smaller tanks available upon request)
•
Leaf filter within engineered chambers to suit specific project needs
•
Complete range of additional items such as duty standby and
booster systems
•
Mains water back-up
•
Helps to reduce your carbon footprint by lowering the volume of water
from local treatment works
•
Tank system supplied with filters, pumps, valves, component set and factory
fitted inlet, calmed inlet and outlet connections
By harvesting rainwater, a constant supply of water can be maintained, whatever the weather. In periods of heavy rain,
rainwater harvesting takes pressure off local drains and limits the potential of flooding. It also stores plentiful supplies
of water for use during dry periods.
•
Offers bespoke design solutions
•
Filter uses first flush principle
•
Manifold system available for multiple dwellings
•
Water filtered to 110 microns
•
Increases water capture by using specialist filters such as RIDGISTORM-X4
Contents
Rainwater harvesting
Why harvest rainwater?
Harvested rainwater can be used for:
SECTION 6
• Population growth and rising consumption is increasing
• Toilet flushing
Rainwater harvesting overview
90 - 91
• Irrigation and landscape watering
Rainstream
92 - 93
the demand for water
• Climate change is creating pressure to conserve water
• Cooling and sprinkler systems
• Legislation is enforcing the need to conserve water
• Vehicle washing
• Higher water charges and water metering are predicted
• Domestic and commercial laundry
• We use up to 70% more water now than we did 30 years ago
Commercial systems
Residential systems
If you are interested in rainwater harvesting systems for
If you are interested in rainwater harvesting systems for
commercial applications, including schools, office blocks,
residential use, please contact Polypipe Building Products
warehouses, hotels, and other multi-occupancy venues please
on +44 (0) 1709 770000.
contact Polypipe Terrain on +44 (0) 1622 795200.
90
91
RAINWATER
HARVESTING
OVERVIEW
SECTION 6
www.polypipe.com/rainwaterharvesting
Rainwater harvesting
Rainstream
Rainstream Home XL
for residential applications
to withstand water pressure at a burial depth of up to 6m
Rainstream from Polypipe offers a range of highly effective solutions for the retention,
filtration and reuse of rainwater.
A key benefit of Rainstream Home XL is that it will never
researched and designed to meet the exact requirements of
need a concrete surround in non-loaded applications, even
the UK market, based on research into the national average
in cases of a high water table. All that is needed is a concrete
household water use and the most up-to-date MET office
base which the tanks are strapped to. It provides a simple
data. Rainstream Home XL tanks allow the homeowner to
Assessment and advice
solution to the complex problem of rising water tables and
meet their exact requirements and therefore provide the
changing weather patterns. As most systems are installed
most cost-effective and efficient solution in the market,
Our experts offer a wide range of advice and support to
during the summer months when water tables are at their
without the need to over-specify and incur disproportionate
help explain the solutions available for the effective capture,
lowest, the rising water table that occurs in winter is often
purchasing and installation costs.
storage, filtration and reuse of rainwater. Services include:
not taken into account. Some systems are not designed to
assessment, tank sizing calculations, technical detail and
be installed within the water table and are unable to
system schematics.
withstand the hydrostatic pressures, resulting in their
Rainstream for commercial
applications
Large-scale solutions have been installed on a wide variety
of projects, from Ministry of Defence sites through to retail
developments. Our team, consisting of fully-qualified designers
and engineers, have the technical pedigree and manufacturing
capability to design solutions to meet any site requirements.
Together these services ensure that customers receive the
most suitable and effective rainwater reuse system for their
particular application.
1
RAINSTREAM
or 0.6 bar, far beyond the pressures the tank is likely to
face. The range of tank sizes offered by Polypipe has been
collapse. Rainstream Home XL has been designed by civil
Manifold system for
multiple dwellings
engineers to withstand these hydrostatic pressures.
A manifold system can be a highly effective and economical
Further testing has taken place proving the tank’s capability
way of capturing rainwater from multiple properties.
THE GROWING
IMPORTANCE
OF SUDS
1
8
5
2
7
6
10
9
4
3
Typical system process
1
2
3
4
5
6
7
8
9
10
Rainwater falling onto
Pre-tank filtration
The storage vessel is
Captured water is
A sophisticated control
Third stage in-line
An optional ultra
Water is supplied on
A back flow
Outlet to the sewer,
roofs, roads and paved
then removes any larger
typically a large tank
redistributed through a
unit monitors water
filtration to remove
violet disinfection
demand to a number
prevention device
soakaway, attenuation,
areas can be collected
pieces of debris such
which can sometimes
second stage filtration
levels in various parts
finer particles of
process can be used
of outlets around the
stops a backward
or for reuse purposes.
by a variety of measures
as leaves, before the
be included within
and pump assembly.
of the system and
debris before use.
to kill off bacteria
property and can
flow of contaminated
which include guttering,
collected water passes
a building, surface
matches these
and improve the
be used for many
water from the sewer
channel drainage
to the storage tank.
mounted externally
to the water demand
quality of the
different purposes
and acts as a rodent
and specialised roof
or buried below the
at the outlets.
collected water.
including flushing
barrier.
drain systems.
surface of the site.
toilets, watering
gardens or cleaning
vehicles.
92
93
LAND
DRAINAGE
OVERVIEW
SECTION 7
www.polypipe.com/landdrainage
Land drainage
LANDCOIL
SYSTEM
Land drainage overview
Excess water can lead to restricted land access, reduced crop yields, soil erosion and environmental
damage, making effective drainage a critical component of any water management scheme.
THE GROWING
IMPORTANCE
OF SUDS
Land drainage
key benefits
• Full range of pipes and fittings
in sizes from 60-200mm
• Kitemarked to BS 4962
(blue coil and couplers only)
• Blue as standard, also available
in black
• Perforated and unperforated
options available
• Flexible, durable and easy
to install
• Extremely cost-effective
• Supported by a full range
of fittings
• Manufactured from PVCu
Landcoil drainage systems
Contents
Our Landcoil range is specifically designed to aid in the
successful management of land water. It offers significant
improvements in areas where poor drainage negatively affects
ground quality, from agricultural applications requiring
enhanced soil conservation or crop production capabilities;
to sports and leisure projects struggling with waterlogged
sections of pitch or turf. Manufactured in one of the UK’s
SECTION 7
Land drainage
Land drainage overview
94 - 95
Landcoil system
96 - 97
largest dedicated manufacturing facilities, our PVCu Landcoil
range includes a choice of diameters, colours and coil lengths.
It is also durable, easy to install, carries the BS 4962 quality
Kitemark and is supported by an extensive range of fittings.
BS4962
KM55701
Certificate
number
KM06710
94
95
LAND
DRAINAGE
OVERVIEW
SECTION 7
www.polypipe.com/landdrainage
Land drainage
LANDCOIL
SYSTEM
Landcoil system
Landcoil is a PVCu single walled flexible piping system,
used for the successful management of land water. It is
available perforated or unperforated in blue as standard,
as a Kitemarked system and is also available in black.
Landcoil Couplers
Landcoil
Landcoil system
key benefits
• Full range of pipes and fittings
available in sizes 60-200mm
• Kitemarked to BS 4962
(blue coil and couplers only)
• Perforated and unperforated
options available
• Flexible, durable and easy
to install
• Extremely cost-effective
• Supported by a full range
of fittings
• Available in yellow for gas
applications (see page 127
for Gas Ducting)
Nominal
size mm
60
Nominal size
mm
Code
OD
mm
Length
mm
Wall thickness
mm
60
DC60
64
110
1.9
10
80
DC80M*
85
130
2.35
10
Pack qty
100
DC100M*
105
130
2.35
10
160
DC160M*
165
150
2.35
10
200
DC200
205
165
2.4
10
THE GROWING
IMPORTANCE
OF SUDS
Landcoil couplers
*Made from polypropylene, other couplers are made from PVCu.
Note: Landcoil couplers can also be used with Linflex Fin & Narrow Filter Drains,
please see Section 2 for more information.
Code
OD
mm
ID
mm
Length
m
LD6025 (B or BLK)
60
50
25
Perforated
*
60
LD6050 (B or BLK)
60
50
50
Perforated
*
60
LD60150 (B or BLK)
60
50
150
Perforated
*
60
UD60150 (B or BLK)
60
50
150
Unperforated
*
80
LD8025 (B or BLK)
80
71
25
Perforated
*
80
LD8050 (B or BLK)
80
71
50
Perforated
*
80
LD80100 (B or BLK)
80
71
100
Perforated
*
80
UD80100 (B or BLK)
80
71
100
Unperforated
*
100
LD10025 (B or BLK)
100
90
25
Perforated
*
• Ease of installation
100
LD10050 (B or BLK)
100
90
50
Perforated
*
100
LD100100 (B or BLK)
100
90
100
Perforated
• Ensures a secure joint
*
100
UD100100 (B or BLK)
100
90
100
Unperforated
*
160
LD16025 (B or BLK)
160
148
25
Perforated
*
160
LD16045 (B or BLK)
160
148
45
Perforated
*
160
UD16045 (B or BLK)
160
148
45
Unperforated
*
200
LD20040 (B or BLK)
200
183
40
Perforated
*
200
UD20040 (B or BLK)
200
183
40
Unperforated
*
Description
Colour
BS4962
KM55701
Certificate
number
KM06710
Couplers
key benefits
• 3 lug design for greater
integrity and fit of joint
• Reduces the possibility of
the coils pulling away from
the coupler during the
drainage process
• Kitemarked to BS 4962
*Black (BLK) is not a Kitemarked product.
• Available with a non-woven
fabric geotextile wrap
(see page 30 for Linflex
Type 8 Narrow Filter Drain)
BS4962
KM55701
Certificate
number
KM06710
Landcoil End Caps
Nominal size mm
Landcoil end caps
Not suitable for air tests.
Code
Pack qty
60
HEC60
10
80
HEC80
10
100
HEC100
10
160
HEC160
10
200
HEC200
10
Landcoil Multi-Junctions
Nominal size mm
Landcoil multi-junctions
96
All dimensions provided are nominal.
Code
Colour
Pack qty
60 to 60
CDJ66
Blue
100
80 to 100
CDJ10M
Blue
20
160 to 60
CDJ160M
Black
5
Outfall pipe subject to minimum order quantity.
For further information please see
our Landcoil datasheet, which can be
downloaded from our website toolbox
www.polypipe.com/toolbox
All dimensions provided are nominal.
97
SEWER
SYSTEMS
OVERVIEW
SECTION 8
www.polypipe.com/sewer
Sewer systems
POLYSEWER PIPES, FITTINGS
& ACCESSORIES
SEWER SADDLES
RIDGISEWER PIPES
Sewer systems overview
RIDGISEWER FITTINGS &
ACCESSORIES
Providing robust, chemical and sewer gas-resistant pipes for new and replacement gravity
sewer systems, both Polysewer and Ridgisewer give design engineers the widest possible
product choice for the best possible solution.
THE GROWING
IMPORTANCE
OF SUDS
Sewer systems key benefits
Polypipe Drainage Pipework Applications
• Fully compliant with WIS 4-35-01
FOUL/COMBINED
SYSTEM
STORMWATER/SURFACE WATER SYSTEM
• BBA approved
• Lighter in weight for increased Health
and Safety benefits
MANUAL OF
CONTRACT
DOCUMENTS FOR
HIGHWAY WORKS
SPECIFICATION
(MCHW)
YES
WATER COMPANY
ADOPTED/
SPECIFICATION
SOLID WALL
BS EN 1401
NO
WATER COMPANY
ADOPTED/
SPECIFICATION
NO
• Durable, long life PVCu and polypropylene
• Structured wall pipe for high ring stiffness
and strength
• Integral sockets for quicker installation
and greater leak tightness
• Strong, flexible pipe wall withstands ground
movement and differential settlement
POLYSEWER
YES
RIDGIDRAIN
RIDGISEWER
RIDGISTORM-XL
RIDGIDRAIN
RIDGISTORM-XL
• Chemical, impact and abrasion resistant
SOLID WALL
BS EN 1401
• Resistant to sulphate attack and corrosion
by sewer gas
POLYSEWER
• Meets WRc Code of Practice for high pressure
water jetting tolerance
RIDGISEWER
RIDGISTORM-XL
• Saddle connectors are available
• Life expectancy in excess of 100 years
RIDGISTORM-XL
Contents
Sewer product range
With diameters ranging from 150-600mm inclusive, our extensive range
of 3m integrally socketed sewer pipes is designed to provide solutions
SECTION 8
Polysewer is a range of PVCu structured wall pipes and fittings available
Sewer systems overview
in diameters from 150-300mm and is manufactured in accordance with
BBA
BRITISH
BBA
BRITISH
BOARD 4-35-01
OF
BOARD OF to
BSI Kitemark Licence numbers KM55698 to WIS
and KM582885
AGRÉMENT
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 00/R121
BS EN 13476. Ridgisewer is manufactured from polypropylene and features
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
four sizes from 400-600mm and includes a complete system of couplings,
manufactured in accordance
with BSI Kitemark
KM55701
BRITISHLicence number BRITISH
BRITISH
BRITISH
BRITISH
BBA
to WIS 4-35-01.
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
KM55698
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
CERTIFICATE No. 02/3923
KM55701
BBA
BBA
BBA
BBA
CERTIFICATE
No.
CERTIFICATE
No. 00/R121
& 90/R054
00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE
No. 93/R078
CERTIFICATE
No. 00/R121
BBA
BBA
BBA
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
BBA
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BOARD
BOARD
OF OF
AGRÉMENT
AGRÉMENT
BRITISH
BRITISH
BOARD
BOARD
OF OF
AGRÉMENT
AGRÉMENT
CERTIFICATE
No. 02/3923
CERTIFICATE
No. 90/R054
BRITISH
BRITISH
BOARD
BOARD
OF OF
AGRÉMENT
AGRÉMENT
CERTIFICATE
No. 02/H068
CERTIFICATE
No. 00/3678
BOARD
BOARD
OF OF
AGRÉMENT
AGRÉMENT
BRITISH
BRITISH
BOARD
BOARD
OF OF
AGRÉMENT
AGRÉMENT
CERTIFICATE
No. 00/3678
CERTIFICATE
No. 03/3979
BRITISH
BRITISH
BOARD
BOARD
OF OF
AGRÉMENT
AGRÉMENT
CERTIFICATE
No. 00/R121 & 3678
CERTIFICATE
No. 00/R1221
Polysewer - pipes, fittings and accessories
Sewer Saddles and Ridgisewer pipe
Ridgisewer - fittings and accessories
seals, bends, junctions, specialist fabrications and saddles. Ridgisewer is
98
Sewer systems
for even the most difficult gravity sewer projects.
98 - 99
100 - 104
105
106 - 109
CERTIFICATE No. 03/3979
CERTIFICATE No. 00/R1221
CERTIFICATE No. 00/3746
99
SEWER
SYSTEMS
OVERVIEW
SECTION 8
www.polypipe.com/sewer
Polysewer - Pipes, fittings and accessories
POLYSEWER PIPES, FITTINGS
& ACCESSORIES
SEWER SADDLES
RIDGISEWER PIPES
Polysewer
BBA
Polysewer Integrally Socketed Pipes
BBA
PS632
146
160
3
PS1032
229
250
3
PS1232
301
330
3
Code
150
225
300
OD
mm
BBA Pack qty
Length
m
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BBA
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
NUMBERS
00/R121, 00/3678 & 02/H068
A CERTIFICATE
B
mm
mm
Nominal
size mm
Code
46
150
PS609
115
95
23
225
PS1009
123.5
92.5
8
300
PS1209
152
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BRITISH
6m lengths available, subject to minimum order quantity and lead
times.
BOARD OF
Polysewer integrally
socketed pipes
BBA
Polysewer 15° Bends
ID
mm
Nominal
size mm
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
Made to order and subject to lead times.
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
RIDGISEWER FITTINGS &
ACCESSORIES
CERTIFICATE No. 00/R121 & 00/3678
Pack qty
10
1
BBA
114
1BRITISH
BOARD OF
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
AGRÉMENT
CERTIFICATE No. 90/R054
CERTIFICATE No. 03/3979
Polysewer 15° bends
CERTIFICATE No. 03/3979
Each bend supplied with 2 seals.
BBA
Each pipe supplied with 1 seal.
OD ID
BBA
KM55698
BBA
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
Nominal
size mm
Code
150
PSSP1
225
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
10
BBA
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
BBA
BBA
A
10
10
A
BRITISH
BRITISH
BOARD
BOARDOF
OF
AGRÉMENT
AGRÉMENT
Nominal
size mm
Code
150
PS667
115
95
10
225
PS1067
143.5
92.5
1
300
PS1267
177
Polysewer sealing rings
mm
BBA
B
mm
CERTIFICATE
No.
00/R121
CERTIFICATE
No.
00/R121 & 3678
Pack qty
BBA
114
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BBA
AGRÉMENT
AGRÉMENT
CERTIFICATE
NUMBERS
CERTIFICATE
No. 02/H068
00/R121, 00/3678 & 02/H068
BBA
B
A
CERTIFICATE No. 00/R1221
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
BRITISH
BRITISH
Polysewer 30° Bends
BOARD
BOARDOF
OF
BBA
Pack qty
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
PSSP2
BRITISH
CERTIFICATE No. 93/R078
BBA
BBA
B
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBAPSSP3
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
Polysewer Sealing Rings
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
300
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
BRITISH
BRITISH
BOARD
BOARDOF
OF
AGRÉMENT
AGRÉMENT
CERTIFICATE
No.
00/R121
& 00/3678
CERTIFICATE
No.
00/3746
BBA
1
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
Polysewer 30° bends
Each bend supplied with 2 seals.
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
BRITISH
BOARD OF
AGRÉMENT
BBA
CERTIFICATE No. 00/R1221
B
BBA
A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
B
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BRITISHOF
BOARD
BOARD OF
AGRÉMENT
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
A
BBA
Nominal
size mm
Polysewer double
socket couplings
BBA
BBA
BRITISH
Polysewer Double
Socket
Couplings
BOARD
OF
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
AGRÉMENT
BBA
CERTIFICATE No. 00/R121 & 3678
Code
BRITISH
BOARD OF
AGRÉMENT
BRITISHCERTIFICATE No. 00/3746
BOARD OF
AGRÉMENT
A
mmCERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
B
mm
BBA
BRITISH
BOARD OF
AGRÉMENT
Pack qty
CERTIFICATE No. 00/R121
BBA
Polysewer 45° Bends
BRITISH
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
Nominal
size mm
Code
BBA
BBA
Pack qty
BRITISH
BRITISHOF
BOARD
BOARD OF
AGRÉMENT
AGRÉMENT
BRITISHOF
BOARD
BOARD OF
AGRÉMENTB
A
AGRÉMENT
CERTIFICATE No. 02/H068
CERTIFICATE NUMBERS
mm00/R121,
mm
00/3678 & 02/H068
CERTIFICATE No. 00/R121 & 3678
CERTIFICATE No. 00/R121
150
PS601
161
183
10
150
PS603
135
95
10
225
PS1001
251
260
1
225
PS1003
164.5
92.5
1
300
PS1201
332
280
1
300
PS1203
203
114
B
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
1
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
CERTIFICATE No. 00/3746
CERTIFICATE No. 00/R121 & 00/3678
CERTIFICATE No. 03/3979
CERTIFICATE No. 03/3979
Polysewer 45° bends
Each bend supplied with 2 seals.
Each coupler supplied with 2 seals.
B
A
CERTIFICATE No. 02/3923
CERTIFICATE No. 00/3678
Polysewer Double Socket Slip Couplings
150
PS611
190
63
225
PS1000
251
260
1
225
PS1011
316.5
92.5
300
PS1200
332
280
1
300
PS1211
385
Made to order and subject to lead times.
Polysewer double
socket slip couplings
B
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
183
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
BRITISH
OF
AGRÉMENT
CERTIFICATE No. 00/3746
BOARD
CERTIFICATE No. 00/R121 & 00/3678
BBA
100
All dimensions provided are nominal.
Nominal
size mm
Code
mm
OF
AGRÉMENT
CERTIFICATE No. 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
CERTIFICATE No. 00/R121 & 3678
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/R121
& 00/3678
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
10
1
BRITISH
BBA 1
BOARD OF
AGRÉMENT
114
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
B
A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BOARD OF
AGRÉMENT
B
mm
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
KM55698
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/R121
CERTIFICATE NUMBERS
BOARD
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 03/3979
Each coupler supplied with 2 seals.
A
BBA
BBA
Pack qty
BRITISH
BOARD OF
PS600
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/R121
& 3678OF
BOARD
BBA
BBA
BBA
BBA
A
AGRÉMENT
Polysewer 90° Bends
BRITISH
150
B
mm
B
A
CERTIFICATE No. 00/R1221
BBA
BBA
161
BRITISH
BOARD OF
AGRÉMENT
BRITISH
OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
Code
CERTIFICATE No.BOARD
02/H068
BBAPack qty
BBA 10
CERTIFICATE No. 02/3923
Nominal
size mm
A
mm
BBA
BRITISH
BOARD OF
AGRÉMENT
A
KM55698
BBA
Polysewer 90° bends
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
A
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
B
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
Each bend supplied with 2 seals.
BBA
All
dimensions provided are nominal.
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
101
SEWER
SYSTEMS
OVERVIEW
SECTION 8
www.polypipe.com/sewer
Polysewer - Fittings and accessories
POLYSEWER PIPES, FITTINGS
& ACCESSORIES
SEWER SADDLES
BBA
BRITISH
BOARD OF
AGRÉMENT
Polysewer 45° Equal Junctions
Code
A
mm
B
mm
C
mm
PS605
161
150
285
PS1005
251
225
408
PS1205
332
300
508
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
E
mm
F
mm
Pack qty
445
95
95
5
92.5
114
BBA
647
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
114
92.5
BRITISH
BOARD OF
AGRÉMENT
1
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
1
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
C
BBA
BRITISH
Polysewer 90° Unequal
BOARD OF Junctions
CERTIFICATE No. 00/R121 & 00/3678
D
mm
812
BBA
RIDGISEWER PIPES
Code
A
mm
B
mm
PS643RS
150
110
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
mm
D
mm
E CERTIFICATE No. 00/R121
F
mm
mm
182
301
69
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
Pack qty
65
BBA
BBA
BOARD OF
AGRÉMENT
BBA
BOARD OF
AGRÉMENT
B
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
F
CERTIFICATE No. 93/R078
RIDGISEWER FITTINGS &
ACCESSORIES
5
Note: 110mm & 160mm sockets are for connection to EN 1401-1 solid wall pipes.
150mm, 225mm & 300mm sockets are for connectionBRITISH
to Polysewer structured wall
pipes.
BRITISH
CERTIFICATE No. 03/3979
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
B
Polysewer 45° equal junctions
Each junction supplied with 3 seals.
C
C
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
A
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
BRITISH
BOARD OF
AGRÉMENT
BBA
CERTIFICATE No. 00/R1221
BBA
A
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
E
D
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
CERTIFICATE No. 00/3746
Polysewer 45° Unequal Junctions
Polysewer 45° unequal junctions
Each junction supplied with 3 seals.
Code
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
Pack qty
PS635RS
161
110
242.5
400
62
57
5
PS1035RS
251
110
280.5
517
92.5
67.5
1
PS1031
251
150
324
537
92.5
82.5
1
PS1031RS
251
160
328
PS1235RS
300
110
311
567
BBA
523
PS1231
300
150
348
586
PS1231RS
300
160
356
573
PS12100
300
225
458
704
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
92.5
114
82.5
BBA
67.5
BRITISH
BOARD OF
AGRÉMENT
1
CERTIFICATE No. 00/R121
1
114
82.5
1
114
82.5
1
114
100
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
1
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
CERTIFICATE No. 00/R1221
BBA
F
CERTIFICATE No. 02/3923
E
BBA
Polysewer 90° Equal Junctions
BBA
B
C
D
E
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BRITISH
BOARD OF
AGRÉMENT
A
mm
Code
PS623
CERTIFICATE No. 02/H068
mm
150
150
B
mm
186
mm
mm
400
BBA
69
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
BBA
F
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BRITISH
BOARD OF
AGRÉMENT
Pack qty
69
BBA
225
PS10101
225
BBA
BBA
PS12101
BBA
CERTIFICATE No. 02/3923
5
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
300
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
121
1
A
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
10
1
BBA
98
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
Code
A
mm
150
PS620
215
BBAC
mm
BBA 85
178
225
PS1020
308
248
101
92
1
300
PS1220
395
329
110
101
1
Nominal
size mm
B
mm
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
Pack qty
BBA
76
10
BRITISH
BOARD OF
AGRÉMENT
D
mm
CERTIFICATE No. 00/R121 & 3678
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
BBA
Polysewer end caps
BRITISH
Each
end cap supplied with 1 seal.
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
CERTIFICATE No. 00/R121 & 00/3678
Note: 110mm & 160mm sockets are for connection to EN 1401-1 solid wall pipes. 150mm, 225mm &
300mm sockets are for connection to Polysewer structured wall pipes.
length
BRITISH Dimension C is the overall
BRITISH
BOARD OF
BOARD OF
of the fitting. Dimension D is the length of the spigot that pushes
inside a socket. (i.e. D = C minus
the
AGRÉMENT
AGRÉMENT
CERTIFICATE No. 93/R078
CERTIFICATE No. 90/R054
thickness of the material that is the flange.)
BBA
Polysewer socket plugs
Each
socket plug supplied with 1 seal.
BRITISH
BBA
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
B
BRITISH
BOARD OF
AGRÉMENT
BBA
CERTIFICATE No. 00/3746
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
150
CERTIFICATE No. 00/R1221
C
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/R1221
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
Code
Description
BRITISH
BOARD OF
AGRÉMENT
PS6103
Pack qty
BBA
BBA
To adapt 87.5° bends and 45° unequal junctions
BBA
to EN 1401 pipes
CERTIFICATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121BRITISH
& 3678
BOARD OF
AGRÉMENT
10
CERTIFICATE No. 93/R078
150
PS6104
To adapt 87.5° junctions to EN 1401 pipes
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BBA
CERTIFICATE No. 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
10
D
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
E
E
BBA
Polysewer Snap Caps & Seals
CERTIFICATE No. 03/3979
BRITISH
BOARD OF
AGRÉMENT
BBA
A
BBA
D
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/3678
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
C
BRITISH
BOARD OF
AGRÉMENT
36
BBA
BRITISH
BOARD OF
AGRÉMENT
F
A
mm
CERTIFICATE No. 02/3923
Nominal
size mm
Polysewer 90° equal junctions
Each junction supplied with 3 seals.
150
BRITISH
BOARD OF
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
CERTIFICATE No. 00/R121 & 00/3678
CERTIFICATE No. 00/R121 & 3678
mm
PS6101
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
AGRÉMENT
BCERTIFICATE No. 00/R121
& 3678Pack qty
mm
CERTIFICATE No. 02/H068
Polysewer Socket Plugs
BRITISH
BOARD OF
AGRÉMENT
E
D
150
BOARD OF
AGRÉMENT
BBA
B
BBA
CERTIFICATE No. 00/3678
BBA
A
Code
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 00/R121 & 00/3678
B
BBA
BRITISH
BOARD OF
AGRÉMENT
D
BRITISH
BOARD OF
AGRÉMENT
Polysewer End
Caps
BRITISH
Nominal
size mm
300
C
A
BBA
BRITISH
BOARD OF
AGRÉMENT
Each junction supplied with 3 seals.
BRITISH
BOARD OF
AGRÉMENT
E
E
E
Polysewer 90°
unequal junctions
F
BBA
BBA
CERTIFICATE
No. 00/R121
CERTIFICATE
No. 00/3678
BRITISH
BRITISH
BOARD
BOARD OF
OF
AGRÉMENT
AGRÉMENT
BBA
BRITISH
BRITISH
BOARD
BOARD OF
OF
AGRÉMENT
AGRÉMENT
BRITISH
BRITISH
BOARD
BOARD OF
OF
AGRÉMENT
AGRÉMENT
BBA
BRITISH
BRITISH
BOARD
BOARD OF
OF
AGRÉMENT
AGRÉMENT
BBA
BRITISH
BRITISH
BOARD
BOARD OF
OF
AGRÉMENT
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BRITISH
BOARD
BOARD OF
OF
AGRÉMENT
AGRÉMENT
CERTIFICATE
NUMBERS
CERTIFICATE
No. 02/3923
00/R121, 00/3678 & 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
Polysewer snap caps
and seals
CERTIFICATE
CERTIFICATE No.
No. 00/R121
00/R1221& 00/3678
Polysewer Rodding Eye
Nominal
size mm
Code
Description
150
PS622S
Sealed oval top in aluminium
Pack qty
BBA
8
CERTIFICATE
CERTIFICATE No.
No. 93/R078
02/H068
CERTIFICATE
No. 90/R054
CERTIFICATE
No. 00/R121
& 3678
CERTIFICATE
No. 03/3979
CERTIFICATE
No. 00/3746
Note: 110mm & 160mm sockets are for connection to EN 1401-1 solid wall pipes. 150mm,
225mm & 300mm sockets are for connection to Polysewer structured wall pipes.
Polysewer rodding eye
BBA
CERTIFICATE No. 02/3923
102
All dimensions provided are nominal.
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
All dimensions provided are nominal.
103
SEWER
SYSTEMS
OVERVIEW
SECTION 8
Polysewer - Accessories
Sewer Saddles and Ridgisewer pipes
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
SEWER SADDLES
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
Nominal
size mm
Code
225
PS10102
300
Each adaptor supplied with 1 seal.
PS12102
A
mm
B
mm
C
mm
D
mm
250BRITISH
251
BBA265
241
BRITISH
134
BBA
315
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BOARD OF
AGRÉMENT
332
CERTIFICATE No. 90/R054
E
mm
The range of saddles for Polysewer and Ridgisewer structured wall plastic pipes allows
the leak-tight and secure connection of 160mm EN1401-1 underground drainage pipe.
They are suitable for both new installations and for post connection into existing pipelines.
92.5
144BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
114
CERTIFICATE No. 03/3979
C
BBA
B
A
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
RIDGISEWER FITTINGS &
ACCESSORIES
Sewer Saddles key benefits
CERTIFICATE No. 00/R1221
E
D
RIDGISEWER PIPES
Sewer Saddles
Polysewer Spigot Adaptors to EN 1401-1
Polysewer spigot adaptors
to EN 1401-1
POLYSEWER PIPES, FITTINGS
& ACCESSORIES
• Designed specifically to seal onto structured wall plastic sewer pipes
BBA
BBA
BBA
Polysewer Socket Adaptors to EN 1401-1
BBA
BBA
BBA
A
B
C
D
E
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
Nominal
size mm
Polysewer socket adaptors
to EN 1401-1
CERTIFICATE No. 00/R121 & 3678
BRITISH
BOARD OF
AGRÉMENT
mm
mm
mm
mm
Pack
qty
CERTIFICATE No. 00/R121
PS689
160
161
147
70
77
10
225
PS1089
250
251
240
110
92.5
1
300
PS1289
125
114
315
332
286
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
• Prohibits protrusion of lateral pipe into the main drain or sewer
CERTIFICATE No. 00/R121 & 00/3678
150
BBA
and - 0.3 bar vacuum
BRITISH
BOARD OF
AGRÉMENT
mm
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
Code
• Durable watertight joint tested to 0.5 bar hydrostatic pressure
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
• Can be connected to smaller pipes and to laterals of different
materials using adaptors
• Environmentally friendly as all elements are recyclable
1
BRITISH
BOARD OF
AGRÉMENT
• Elastomeric seal ensures reliable flexible watertight joint between
CERTIFICATE No. 03/3979
C
Each adaptor supplied with 2 seals.
lateral and main drain/sewer
• Reduces disruption and risk of damage to the sewer as there is
A
B
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
D
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
no need to fully excavate around the pipe
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
E
Sewer Saddles
BBA BBA
BRITISH
BOARD OF
AGRÉMENT
BBA BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BRITISH
BOARD OF
AGRÉMENT
BBA BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 CERTIFICATE
& 3678
No. 00/R121
225 x 150
300 x 225
Code
A
mm
B
mm
PS1021
225
150
PS1221
300
C
mm
D
mm
287
92.5
220
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
345
CERTIFICATE No. 93/R078
Polysewer level
invert reducers
Each adaptor supplied with 2 seals.
A
B
E
D
E
mm
Pack
qty
72.5
1
114
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
92.5
CERTIFICATE No. 90/R054
CERTIFICATE No. 02/3923
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
1
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
BRITISH
CERTIFICATE No. 02/H068
Nominal
size mm BRITISH
Code
BOARD OF
AGRÉMENT
All dimensions provided are nominal.
300
Polysewer Saddle
SLDPS300
10
Ridgisewer Saddle
SLD375450
10
500
Ridgisewer Saddle
SLD500
10
600
Ridgisewer Saddle
SLD600
10
-
177mm Hole Saw
HOL177
1
CERTIFICATE No. 00/R1221
BRITISH
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
Description
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
Ridgisewer Integrally Socketed pipes
Pack
qty
Nominal
size mm
Code
ID
mm
OD
mm
Length
mm
Weight
kg/m
Pack
qty
Double socket to
super clayware pipe
CERTIFICATE No. 00/R121 & 00/3678
10
400
RSW400X3IS4
400
457
3
9.4
5
PS696
Double socket to thick clayware pipe
10
450
RSW450X3IS4
450
511
3
11.8
4
150
PS6105
Double socket Ultrarib adaptor
10
500
RSW500X3IS4/1
500
568
3
13.3
1
225
PS10105
Double socket Ultrarib adaptor
10
600
RSW600X3IS4
587
672
3
15.3
1
BBA
300
PS634
PS12105
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BBA
Double socket UltraribBRITISH
adaptor
BOARD OF
BRITISH
BOARD OF
AGRÉMENT
10
AGRÉMENT
No. 93/R078
CERTIFICATE No. 90/R054
No. 03/3979
Note:CERTIFICATE
For adaption
to 225mm and
300mm clay pipe, flexibleCERTIFICATE
couplings
to WIS 4-41-01 should be used.
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
104
Pack
qty
150
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
Each adaptor supplied with seals.
Code
Ridgisewer
OF
BOARD OF
Polysewer Adaptors BOARD
to other
Pipe Systems
AGRÉMENT
AGRÉMENT
Polysewer adaptors to
other pipe systems
Description
400 & 450
CERTIFICATE No. 03/3979
C
BBA
150
Nominal
size mm
CERTIFICATE No. 00/3746CERTIFICATE No. 00/R121 & 00/3678
Polysewer Level Invert Reducers
Nominal
size mm
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
CERTIFICATE No. 00/R121 & 3678
BBA
BBA
00/R121, 00/3678 & 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
BBA
BRITISHavailable on request, subject
BRITISH to minimum order quantity.
BRITISH Sizes 750 - 3000mm are
6m lengths
BOARD OF
BOARD OF
BOARD OF
AGRÉMENT
AGRÉMENT
AGRÉMENT
available
as Ridgistorm-XL,
please see
Section 3 of this
brochure
for more information.
CERTIFICATE NUMBERS
CERTIFICATE No. 00/R121
CERTIFICATE No. 00/R121 & 00/3678
CERTIFICATE No. 93/R078
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
CERTIFICATE No. 00/3678
KM55701
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
ID OD
Ridgisewer integrally
socketed pipe
Order seals separately for the
Ridgisewer range.
CERTIFICATE No. 03/3979
CERTIFICATE No. 00/R1221
All dimensions provided are nominal.
105
SEWER
SYSTEMS
OVERVIEW
www.polypipe.com/sewer
Ridgisewer - Fittings and accessories
SECTION 8
POLYSEWER PIPES, FITTINGS
& ACCESSORIES
SEWER SADDLES
RIDGISEWER PIPES
Ridgisewer Nitrile Sealing Rings
Nominal
size mm
Code
Pack qty
Code
Ridgisewer 11.25° Bends
Pack qty
Nominal
size mm
Code
A
mm
B
mm
Pack qty
400
SRSW400NIT
2
400
SRSW400
2
400
RSWB40011.25
375
205
1
450
SRSW450NIT
2
450
SRSW450
2
450
RSWB45011.25
415
220
1
500
SRSW500NIT
2
500
SRSW500
2
500
RSWB50011.25/1
490
245
1
280
1
BBA
600
Ridgisewer
sealing rings
Ridgisewer Sealing Rings
Nominal
size mm
2
BRITISH
SRSW600NIT
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
CERTIFICATE No. 00/R121
Made to order
and
are
subject to lead times.
00/R121,
00/3678
& 02/H068
Typically used where soil contains certain
chemicals. Please send soil reports to our
Technical Team.
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
600
BBA
BRITISH
SRSW600
BOARD OF
BBA
BBA
BBA
Sizes 750mm and above are available as Ridgistorm-XL.
2
BRITISH
BOARD OF
AGRÉMENT
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
535
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 00/R121 & 00/3678
Seals are EPDM
to EN681 Part 1 as standard.
CERTIFICATE No. 00/R121
CERTIFICATE No. 00/R121 & 00/3678
Some bends are made to order and subject to lead times.
Ridgisewer 11.25° bends
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
RSWB60011.25
BOARD OF
600
KM55701
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
CERTIFICATE No. 03/3979
CERTIFICATE No. 90/R054
Nominal
size mm
BBA
Ridgisewer double
socket couplings
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
Ridgisewer DoubleBRITISH
Socket
Couplings
BOARD
OF
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
AGRÉMENT
CERTIFICATE No. 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
B
B
A
ID
mm
400
RSWC400
410
490
1
400
450
RSWC450
440
548
1
450
500
BBA
BBA RSWC600
BBA560
600
CERTIFICATE No. 00/R121
RSWC500/1
BRITISH
490
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
CERTIFICATE No. 00/R121 & 00/3678
BBA
713
605
Pack qty
A
mm
B
mm
Pack qty
RSWB40022.5
375
205
1
RSWB45022.5
415
220
1
245
1
280
1
BBA 600
BBA
BBA
RSWB60022.5
535
BBA
BBA
BBA
Sizes 750mm and above are available as Ridgistorm-XL.
BRITISH
RSWB50022.5/1
BOARD OF
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No.
02/H068
BRITISH
BOARD OF
AGRÉMENT
1
CERTIFICATE No. 00/3746
AGRÉMENT
CERTIFICATE No. 00/R1221
Code
500
1
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
Ridgisewer 22.5° Bends
BOARD OF
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
Nominal
size mm
Code
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE BRITISH
No. 02/H068
BOARD OF
AGRÉMENT
OD
mm
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
CERTIFICATE No. 00/R1221
A
490
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
BRITISH
BOARD OF
AGRÉMENT
AGRÉMENT
CERTIFICATE No. 00/R121
& 3678
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 00/R121
CERTIFICATE No. 00/R121 & 00/3678
Some bends are made to order and subject to lead times.
Ridgisewer 22.5° bends
Order seals separately.
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
KM55701
BRITISH
BOARD OF
AGRÉMENT
Order seals separately if required.
B
BBA
CERTIFICATE No. 03/3979
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
B
CERTIFICATE No. 03/3979
B
A
A
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
Slip Couplings
BBA Ridgisewer Double Socket
Nominal
A
B
BBA
Ridgisewer double
socket
BBA
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No.BRITISH
02/H068
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
& 3678
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
size mm
slip couplings
THE GROWING
IMPORTANCE
OF SUDS
Order seals separately if required.
BBA
BRITISH
BOARD OF
AGRÉMENT
A
BBA
RIDGISEWER FITTINGS &
ACCESSORIES
Code
Pack qty
mm
mm
400
RSWSC400
392
490
1
450
RSWSC450
420
548
1
RSWSC500/1
470
605
1
RSWSC600
540
713
1
BBA
600
BBA
500
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
Nominal
size mm
BBA
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
Ridgisewer 45° Bends
AGRÉMENT
CERTIFICATE No. 00/3678
CERTIFICATE No. 00/R1221
Code
A
mm
B
mm
Pack qty
1
400
RSWB40045
375
205
450
RSWB45045
415
220
1
490
245
1
535
280
1
BBA
RSWB60045
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. BRITISH
02/H068
BOARD OF
AGRÉMENT
BBA
BBA
BRITISH
500
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
BRITISH
BOARD OF
AGRÉMENT
BOARD OF
RSWB50045/1
AGRÉMENT
CERTIFICATE No. 00/R121
& 3678
BRITISH
600
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 00/R121
CERTIFICATE No. 00/R121 & 00/3678
Sizes 750mm and above are available as Ridgistorm-XL.
Made to order and are subject to lead times.
A
Order seals separately.
Ridgisewer 45° bends
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
KM55701
BBA
BRITISH
BOARD OF
AGRÉMENT
B
BBA
CERTIFICATE No. 03/3979
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
BRITISH
BOARD OF
AGRÉMENT
A
BBA
B
Order seals separately if required.
CERTIFICATE No. 03/3979
B
A
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
BRITISH
BOARD OF
AGRÉMENT
Nominal size mm
BBA BBA
BRITISH
BOARD OF
AGRÉMENT
Ridgisewer end caps
BBA BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
CERTIFICATE No. 02/H068
00/R121, 00/3678 & 02/H068
BBA
Ridgisewer End Caps
CERTIFICATE No. 00/R1221
Code
Pack qty
All dimensions provided
are nominal.
BRITISH
BBA
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
Pack qty
400
RSWB40090
411
196
646
1
1
450
RSWB45090
441
215
667
1
RSWEC500/1
1
687
1
RSWEC600
1
728
1
BRITISH
BOARD OF
AGRÉMENT
600
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
500
RSWB50090/1BRITISH
BOARD OF
488
600
CERTIFICATE No. 00/R121 & 3678
RSWB60090
533
CERTIFICATE No. 02/H068
AGRÉMENT
BBA250
275
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
A
Sizes 750mm and above are available as Ridgistorm-XL.
CERTIFICATE
No. 00/R121and are subject CERTIFICATE
00/R121 & 00/3678
Made
to order
to leadNo.times.
B
BRITISH
BOARD OF
AGRÉMENT
Ridgisewer 90° bends
Order seals separately if required.
C
CERTIFICATE No. 03/3979
CERTIFICATE No. 93/R078
106
C
mm
1
BRITISH
BOARD OF
AGRÉMENT
BBA
B
mm
B
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
A
mm
RSWEC450
CERTIFICATE No. 00/R121CERTIFICATE No. 00/R121 & 3678 CERTIFICATE No. 00/R121CERTIFICATE
& 00/3678 No. 00/3746
BBA
Code
A
BRITISH
BOARD OF
AGRÉMENT
BRITISH
CERTIFICATE No. 00/R1221
RSWEC400
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 93/R078
Nominal
size mm
BBA
BOARD OF
Ridgisewer 90° Bends
AGRÉMENT
450
Order seals separately if required.
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
400
500
BBA BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
CERTIFICATE No. 90/R054
CERTIFICATE No. 03/3979
All dimensions provided are nominal.
107
SEWER
SYSTEMS
OVERVIEW
SECTION 8
www.polypipe.com/sewer
Ridgisewer - Fittings
POLYSEWER PIPES, FITTINGS
& ACCESSORIES
SEWER SADDLES
RIDGISEWER PIPES
Ridgisewer 45° Equal Junctions
Nominal size
A mm
B mm
Code
Ridgisewer 90° Equal Junctions
C
mm
D
mm
E
mm
F
mm
Pack qty
Nominal size
A mm
B mm
F
mm
Pack
qty
1000
1737
205
205
1
400
400
RSWEJ400T
700
1380
205
205
1
450
450
RSWEJ450Y
1050
1780
220
220
1
450
450
RSWEJ450T
805
1700
220
220
1
500
500
RSWEJ500Y/1
1100
1930
245
245
1
500
500
RSWEJ500T/1
850
1792
245
245
1
600
600
RSWEJ600Y
1309
2175
280
280
1
600
600
RSWEJ600T
1350
1975
280
280
1
BBA
F
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
B
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
CERTIFICATE No. 00/R121 & 00/3678
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
Ridgisewer 90°
equal junctions
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
BBAA
BBA
CERTIFICATE No. 93/R078
E
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
Order seals separately if required.
BRITISH
BRITISH Junctions
Ridgisewer
45° Unequal
BOARD OF
BOARD OF
BBA
BBA
C
AGRÉMENT
AGRÉMENT
CERTIFICATE No. 00/3746
mm
D
mm
BBA
BRITISH
BOARD OF
AGRÉMENT
E
mm
F
mm
Pack
qty
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BRITISH
BRITISH Junctions
Ridgisewer
90° Unequal
BOARD OF
BOARD OF
BBA
BBAC
AGRÉMENT
Nominal sizeCERTIFICATE No. 00/R121 & 3678 Code
A mm
B mm
AGRÉMENT
mm
D
mm
E
mm
F
mm
Pack
qty
CERTIFICATE No. 00/3746
RSWJ400110Y
395
750
196
46
1
400
110
RSWJ400110T
360
750
196
46
1
RSWPSJ400150Y
435
750
196
51
1
400
150
RSWPSJ400150T
375
750
196
51
1
400
160
RSWJ400160Y
435
750
196
51
1
400
160
RSWJ400160T
375
750
196
51
1
450
110
RSWJ450110Y
422
815
215
46
1
450
110
RSWJ450110T
385
815
215
46
1
450
150
RSWPSJ450150Y
462
815
215
51
1
450
150
RSWPSJ450150T
400
815
215
51
1
450
160
RSWJ450160T
400
815
215
51
1
500
110
RSWJ500110T/1
415
920
240
46
1
500
150
RSWPSJ500150T/1
430
920
240
51
1
500
160
RSWJ500160T/1
430
920
240
51
1
600
110
RSWJ600110T
465
1060
275
46
1
600
150
RSWPSJ600150T
480
1060
275
51
1
600
160
RSWJ600160T
480
1060
275
51
1
450
160
RSWJ450160Y
500
110
RSWJ500110Y/1
450
920
240
46
1
500
150
RSWPSJ500150Y/1
490
920
240
51
1
500
160
RSWJ500160Y/1
490
920
240
51
1
600
110
RSWJ600110Y
503
1060
275
46
1
600
150
RSWPSJ600150Y
543
1060
275
51
1
600
160
RSWJ600160Y
543
1060
275
51
1
BBA
462
BBA
815
215
51
BRITISH
Made to order andBRITISH
subject
750mm
BOARD
OF to lead times. SizesBOARD
OF and above are available as Ridgistorm-XL.
AGRÉMENT
B
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
1
110 & 160mm branches are for EN1401
pipes. 150mm branches are for Polysewer.
Order seals separately if required.
Made to order and subject to lead times. Sizes 750mm and above are available as Ridgistorm-XL.
BBA
BBA
B
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
F
Ridgisewer 90°
unequal junctions
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 00/3678
F
C
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
A
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
D
BBA
E
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R121 & 3678
A
CERTIFICATE No. 03/3979
E
D
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/R1221
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
E
E
BRITISH
BOARD OF
AGRÉMENT
BBA
110
CERTIFICATE No. 93/R078
CERTIFICATE No. 02/H068
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
150
CERTIFICATE No. 93/R078
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
400
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 02/3923
BBA
E
D
CERTIFICATE No. 02/H068
C
BBA
A
400
CERTIFICATE No. 00/R121
BRITISH
BOARD OF
AGRÉMENT
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 90/R054
CERTIFICATE No. 02/3923
CERTIFICATE No. 00/R1221
3678
Nominal size CERTIFICATE No. 00/R121 &Code
A mm
B mm
CERTIFICATE NUMBERS
00/R121, 00/3678 & 02/H068
BBA
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 93/R078
E
CERTIFICATE No. 00/3678
CERTIFICATE No. 02/H068
110 & 160mm branches are for
EN1401 pipes. 150mm branches
are for Polysewer.
Order seals separately if required.
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 03/3979
E
D
CERTIFICATE No. 02/3923
Ridgisewer 45°
unequal junctions
BBA
CERTIFICATE No. 90/R054
THE GROWING
IMPORTANCE
OF SUDS
C
C
BRITISH
BOARD OF
AGRÉMENT
RIDGISEWER FITTINGS &
ACCESSORIES
Sizes 750mm and above are available as Ridgistorm-XL.
F
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3746
CERTIFICATE No. 02/H068
All dimensions provided are nominal.
E
mm
RSWEJ400Y
Order seals separately if required.
108
D
mm
400
B
BBA
C
mm
400
Made to order and subject to lead times. Sizes 750mm and above are available as Ridgistorm-XL, please
see Section 3 for further information.
Ridgisewer 45°
equal junctions
Code
BBA
BRITISH
BOARD OF
AGRÉMENT
BBA
BRITISH
BOARD OF
AGRÉMENT
CERTIFICATE No. 00/3678
CERTIFICATE No. 00/R121 & 3678
CERTIFICATE No. 00/R1221
CERTIFICATE No. 00/3746
109
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Cable protection
POWER
CLASS 1
POWER
CLASS 2 AND 3
Cable protection overview
RIDGICOIL
POWER
Our cable protection range of products has been used extensively for rail, highways,
housing developments, commercial, retail and industrial infrastructure applications.
POWER
ACCESSORIES
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
Applications
We offer a full range of cable
MOTORWAY
COMMS
protection systems for:
• Power
• Motorway Communications
LIGHTING
• Lighting
• Utilities
– Gas
– Water
– Telecommunications
– Traffic signalling
– Cable television
– PVCu specification
UTILITIES
INSTALLATION
ADVICE
Contents
Cable protection range
Reflecting our expertise in protecting crucial power, lighting
and communications cabling, our UK-manufactured range
of pipes are certified to British and European standards
and conform to industry standards such as ENATS 12-24, the
Electrical Supply Industry Specification for Cable Protection.
With over 1,000 tried and tested products to choose from,
we provide the largest range of cable protection systems for
almost any application.
ENATS
(12-24 )
(Network Rail Parts and Drawing Systems
(PADS) Approved).
Certificate number: PA05/05875
Approved Ridgiduct and Ridgicoil can be used in
conjunction with Under Track Crossing (UTX) chambers,
manufactured from Ridgistorm-XL.
110
SECTION 9
Cable protection
Cable protection overview
110 - 111
Power - Class 1
112 - 113
Power - Class 2
114
Power - Class 3
115
Ridgicoil power and power accessories
116 - 117
General purpose power
118 - 119
Motorway communications
120 - 121
Lighting
122 - 125
Utilities
126 - 129
Installation advice
130 - 131
111
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Cable protection
Power
Class 1
POWER
CLASS 1
POWER
CLASS 2 AND 3
Power
Ridgiduct Coupling
Polypipe is the UK’s leading supplier to the power and utilities industry and is an approved manufacturer
for many Distribution Network Operator (DNO) companies. Our products include cable protection
that complies with ENATS 12-24 Classes 1, 2 and 3, as well as above ground solutions such as cable
guards and hockey sticks.
ID
mm
Code
Pack qty
100
RBC100
10
125
RBC125
10
150
RBC150
10
RIDGICOIL
POWER
ENATS
POWER
ACCESSORIES
(12-24 )
Ridgiduct coupling
Trefoil Clip
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
Suitable for use with both Ridgiduct Power HV duct lengths and bends,
the polypropylene Trefoil Clip is designed to support duct arrangement
Power - Class 1
during installation and burial, ensuring consistent spacing of duct
Ridgiduct Power HV
Ridgiduct Power HV Trefoil Clip
Diameter mm
Manufactured from polypropylene, Ridgiduct Power HV offers a stiff yet flexible
twinwall structured cable protection system, which complies fully with ENATS 12-24
ENATS
Class 1 specification. It is available in black outer, red inner as standard but can also
(12-24 )
be manufactured with a red outer and inner.
• Complies with ENATS 12-24 Class 1 specification,
450N compressive strength at 75°C
• Complies with BS EN 61386-24:2010, Type 750N,
normal duty impact resistance
• Suitable for use with high voltage, XLPE
sheathed cables
• IP4X rated system (dust protection)
• Available with red inner wall and either a black
or red outer wall for increased identification
ID
mm
OD
mm
Length
m
100
118
2
RBHV100X2 (B or R)
85
100
118
3
RBHV100X3 (B or R)
85
Colour
Code
RBHV100X6 (B or R)
100
118
6
125
148
2
RBHV125X2 (B or R)
125
148
3
RBHV125X3 (B or R)
125
148
6
150
178
2
RBHV150X2 (B or R)
150
178
3
RBHV150X3 (B or R)
150
178
6
RBHV125X6 (B or R)
RBHV150X6 (B or R)
Colour
Code
Pack qty
100
RBTC100
10
125
RBTC125
10
150
RBTC150
10
Pack qty
PVCu Power HV is a single wall cable protection system which fully
complies with ENATS 12-24 Class 1 specification. Available for both
it is suitable for high, medium and low voltage applications. It is
46
PVCu Power HV Duct
46
36
36
Nominal wall
thickness mm
ID
mm
OD
mm
Length
m
Pack
qty
4.1
102
110
6
5.2
150
SD7110X6BNS
95
160
6
SD7160X6BNS
46
4.1
102
110
6
SD7110X6RNS
95
5.2
150
160
6
SD7160X6RNS
46
4.1
102
110
6
SD7110X6BSPE & UG402B
95
Type 750N, normal duty
5.2
150
160
6
SD7160X6BSPE & UG602B
46
impact resistance
4.1
102
110
6
SD7110X6RSPE & UG404B
95
• IP47 rated system (watertight up
5.2
150
160
6
SD7160X6RSPE & UG602B
46
to 1 metre) for sealed systems,
UNSEALED
36
Ridgiduct Power HV Bends
Description
PVC Double
Socket Bend
100mm
PVC Double
Socket Bend
125mm
ENATS
(12-24 )
PVC Double
Socket Bend
150mm
Bend
radius
m
Angle
3.9
11.25°
RBHVB100X11X3.9 (B or R)
1
3.9
22.5°
RBHVB100X22X3.9 (B or R)
1
1.2
45°
RBHVB100X45X1.2 (B or R)
1
1.2
90°
RBHVB100X90X1.2 (B or R)
1
3.9
11.25°
RBHVB125X11X3.9 (B or R)
1
3.9
22.5°
RBHVB125X22X3.9 (B or R)
1
1.2
45°
RBHVB125X45X1.2 (B or R)
1
1.2
90°
RBHVB125X90X1.2 (B or R)
1
3.9
11.25°
RBHVB150X11X3.9 (B or R)
1
3.9
22.5°
RBHVB150X22X3.9 (B or R)
1
1.2
45°
RBHVB150X45X1.2 (B or R)
1
1.2
90°
RBHVB150X90X1.2 (B or R)
1
Colour
Code
Available in black (B) or red (R). Please specify with order.
Red (R) is made to order and subject to lead times.
112
All dimensions provided are nominal.
Pack
qty
Made to order and subject to lead times. Please order duct and coupling together to
make a sealed system.
INSTALLATION
ADVICE
PVCu Power HV
key benefits
Code
Colour
SEALED
• Low weight, flexible, durable and high strength
Ridgiduct Power HV bend
PVCu Power HV Duct
available in black as standard, but can also be manufactured in red.
46
Available in black (B) or red (R). Please specify with order.
Red (R) and black (B) are both made to order and subject to lead times.
Note: Not a sealed system. Where a sealed system is required, our PVCu Power HV Duct
with sealed joints tested to BS EN 1277, should be considered. See page 113 for more
information.
• Manufactured from polypropylene
ENATS
(12-24 )
unsealed and sealed systems, with sealed joints tested to BS EN 1277,
85
LIGHTING
UTILITIES
• Supplied with an integral coupler
• Full range of fittings and accessories available
Trefoil Clip
PVCu Power HV
Ridgiduct Power HV Duct
Ridgiduct Power HV
key benefits
MOTORWAY
COMMS
lengths and bends.
• Complies with ENATS 12-24
Class 1 specification, 450N
compressive strength at 75°C
• Complies with BS EN 61386-24:2010,
otherwise IP4X
• 6m lengths as standard (other
lengths available on request)
PVCu Power HV Bends
Description
PVCu Duct
Bends
110mm
PVCu Duct
Bends
160mm
Bend
radius
m
Angle
3.9
Code
Pack
qty
11.25°
SDB7110X11X3.9 (B or R) *
1
3.9
22.5°
SDB7110X22X3.9 (B or R) *
1
1.2
45°
SDB7110X45X1.2 (B or R) *
1
1.2
90°
SDB7110X90X1.2 (B or R) *
1
3.9
11.25°
SDB7160X11X3.9 (B or R) *
1
3.9
22.5°
SDB7160X22X3.9 (B or R) *
1
1.2
45°
SDB7160X45X1.2 (B or R) *
1
1.2
90°
SDB7160X90X1.2 (B or R) *
1
Colour
Available in black (B) or red (R). Please specify with order.
Red (R) is made to order and subject to lead times. *For sealed bends, please
add the prefix ‘S’ to the end of the code. Bends for a sealed system are plain
ended and bends for an unsealed system are single socketed.
• Standard markings - Electrical
Cable Duct (other markings
available on request)
ENATS
(12-24 )
PVCu Power HV bend
All dimensions provided are nominal.
113
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Power Class 2 and Class 3
POWER
CLASS 2 AND 3
Power - Class 2
Power - Class 3
Ridgiduct Power
Polyduct Power
Ridgiduct is a twinwall system, specifically engineered
Polyduct Power is manufactured from medium density polyethylene
to provide a light, yet robust solution for cable protection.
(MDPE) and is an ENATS 12-24 Class 3 specification product, available
Ridgiduct is manufactured from high density polyethylene
in coiled lengths. It has exceptional durability and can be used for either
(HDPE) and the resulting stiff, yet flexible, twinwall
ENATS
structure easily outperforms alternative products.
(12-24 )
POWER
CLASS 1
RIDGICOIL
POWER
POWER
ACCESSORIES
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
open trench or trenchless applications.
ENATS
PA05/05875
(12-24 )
Polyduct Power Duct
Ridgiduct Power Duct
Ridgiduct Power key benefits
ID
mm
OD
mm
Length
m
Pack
qty
Code
ID
mm
OD
mm
Length
m
Code
Pack
qty
32
37
100
PD3237X100BEPE
1
37
50
PD3237X50BEPE
1
100
118
2
RB100X2*
85
32
100
118
3
RB100X3*
85
32
37
25
PD3237X25BEPE
1
100
118
6
RB100X6*
85
38
44
100
PD3844X100BEPE
1
125
148
2
RB125X2
46
38
44
50
PD3844X50BEPE
1
125
148
3
RB125X3
46
38
44
25
PD3844X25BEPE
1
125
148
6
RB125X6
46
50
60
50
PD5060X50BEPE
1
150
178
2
RB150X2
36
50
60
25
PD5060X25BEPE
1
150
178
3
RB150X3
36
• Network Rail PADS approved
150
178
6
RB150X6
36
• Supplied with an integral coupler
225
267
6
RB225X6PE *
14
300
354
6
RB300X6PE *
9
• Complies with ENATS 12-24 Class 2 specification
450N compressive strength at 50oC
• Complies with BS EN 61386-24:2010, Type 750N,
normal duty impact resistance
• A preferred choice for many distribution
network operator (DNO) companies
• IP4X system (dust protection)
• Low weight, flexible, durable and high strength
• Good impact resistance, even at low
Polyduct Power
Polyduct Power
key benefits
MOTORWAY
COMMS
LIGHTING
• Complies with ENATS 12-24 Class 3,
450N compressive strength at 23oC
• Complies with BS EN 61386-24:2010,
UTILITIES
Type 450N, normal duty
impact resistance
• Available in 25m, 50m or 100m
Made to order and subject to lead times. Supplied plain ended, please order couplers
and seals separately. *A sealed system can be achieved using Ridgidrain sealing rings
and/or couplers, please see page 23.
INSTALLATION
ADVICE
coils plain ended
• Flexibility of coil eliminates the
needs for specialised bends
temperatures
Ridgiduct Bends
• Available in an alternative twinwall split duct
form for easy installation around existing
Description
cables with minimal change in strength
PVCu Double
Socket Bend
100mm
PVCu Double
Socket Bend
125mm
PVCu Double
Socket Bend
150mm
Ridgiduct bend
• High impact resistance
Bend radius
m
Pack
qty
Angle
2.4
11.25°
RBB100X11X2.4*
1
2.4
22.5°
RBB100X22X2.4*
1
0.45
45°
RBB100X45X0.45*
1
0.45
90°
RBB100X90X0.45*
2.4
11.25°
2.4
22.5°
0.61
Code
Polyduct Black Couplings
1
ID
mm
OD
mm
Code
RBB125X11X2.4
1
32
37
PDC32
1
RBB125X22X2.4
1
38
44
PDC38
1
45°
RBB125X45X0.61*
1
50
60
PDC50
1
0.61
90°
RBB125X90X0.61*
1
2.4
11.25°
RBB150X11X2.4
1
2.4
22.5°
RBB150X22X2.4
1
0.61
45°
RBB150X45X0.61*
1
0.61
90°
RBB150X90X0.61*
1
Pack
qty
ENATS
(12-24 )
Polyduct coupling
Sealed Ridgiduct bends are available for 100 & 150mm duct.
*Bend radius compliant with ENATS 12-24.
Ridgiduct Power Duct (non-standard sizes)
Ridgiduct Coupling
ID
mm
ENATS
(12-24 )
Ridgiduct coupling
Code
Pack
qty
100
RBC100
10
125
RBC125
10
150
RBC150
10
225
CRD225*
7
300
CRD300*
3
*225mm and 300mm couplers are from the Ridgidrain range.
Note: If the system is required to be watertight, then couplers will be required from the
Ridgidrain range. For single socket fixed bellmouths and end caps, please see page 127.
114
All dimensions provided are nominal.
ID
mm
OD
mm
Length
m
Code
Coupler
code
Pack
qty
94
110
6
RB94X6
RBC94
95
Note: Available as a sealed system using CRD94 couplings and SRD94 sealing rings.
ENATS
(12-24 )
Ridgiduct Power Duct
All dimensions provided are nominal.
115
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Ridgicoil power and power accessories
POWER
CLASS 2 AND 3
Ridgicoil Power
RIDGICOIL
POWER
Ridgicoil Power
POWER
ACCESSORIES
Ridgiduct Power Split Duct
Ridgicoil is a coiled twinwall cable protection duct,
ID
mm
OD
mm
Length
m
Code
Pack
qty
manufactured from polyethylene with an excellent
100
118
1
RB100X1S
85
impact resistance even at low temperatures. It has
100
118
3
RB100X3S
85
125
148
1
RB125X1S
46
125
148
3
RB125X3S
46
150
178
1
RB150X1S
36
150
178
3
RB150X3S
36
exceptional durability and flexibility, which eliminates
PA05/05875
the need for specialist bends. With a smooth bore,
Note: Sizes 63mm
and 110mm only.
Ridgicoil has a low co-efficient of friction for ease
of cable installation.
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
MOTORWAY
COMMS
Made to order and subject to lead times.
Ridgicoil Power Duct
Ridgicoil Power key benefits
ID
mm
OD
mm
Length
m
• Complies with BS EN 61386-24:2010,
31
40
50
RC40X50BE
40
50
50
RC50X50BE
50
63
50
RC63X50BE
60
75
50
RC75X50BE
71
90
50
Type 450N, normal duty impact resistance
• Provides compressive strength 450N at 23ºC,
but not an ENATS 12-24 approved product
• Network Rail PADS approved
• Ease of use and transportation
• Can be used for trenchless applications
POWER
CLASS 1
Ridgiduct power split duct
Code
Ridgiduct power split duct is mainly used
as retrofit ducting for existing cables.
Ridgiduct Split Duct Fittings
Description
ID
mm
Code
Pack
qty
RC90X50BE
100mm Coupling
100
CRBS100
10
150mm Coupling
150
CRBS150
10
94
110
50
RC110X50BE
140
160
25
RC160X25BE
LIGHTING
UTILITIES
Printed Electrical Cable Duct.
Ridgiduct to PVCu Connectors
• Long coil lengths for reduced jointing
Description
INSTALLATION
ADVICE
Pack
qty
Code
• Low weight high strength
SOCKET TO SPIGOT
• Factory installed polypropylene twine
100mm Ridgiduct socket
to 110mm PVCu spigot
and coupling
150mm Ridgiduct socket
to 160mm PVCu spigot
ARD100110
10
ARD150160
10
ARD150160
SOCKET TO SOCKET
Power - accessories
Ridgiduct bend
94mm
100mm
125mm
150mm
116
All dimensions provided are nominal.
ARD100110 & UG401
10
150mm Ridgiduct socket
to 160mm PVCu socket
ARD150160 & UG601
10
ARD100110
Cable Guard
Ridgiduct Black Long Radius Drawn Bends
ID
mm
100mm Ridgiduct socket
to 110mm PVCu socket
Bend radius
mm
Angle
Code
Pack
qty
420
11.25°
RBDB94X11X0.42
10
420
22.5°
RBDB94X22X0.42
10
420
45°
RBDB94X45X0.42
7
420
90°
RBDB94X90X0.42
7
420
11.25°
RBDB100X11X0.42
10
420
22.5°
RBDB100X22X0.42
10
420
45°
RBDB100X45X0.42
7
420
90°
RBDB100X90X0.42
7
600
11.25°
RBDB125X11X0.6
7
600
22.5°
RBDB125X22X0.6
7
600
45°
RBDB125X45X0.6
4
600
90°
RBDB125X90X0.6
3
610
11.25°
RBDB150X11X0.61
5
610
22.5°
RBDB150X22X0.61
5
610
45°
RBDB150X45X0.61
4
610
90°
RBDB150X90X0.61
3
Diameter
inches
Diameter
mm
Length
ft
Code
Pack
qty
0.75
19
10
CG002X10
25
1.0
25
10
CG003X10
25
1.5
38
10
CG004X10
10
2.0
50
10
CG005X10
10
2.5
64
10
CG006X10
10
3.0
80
10
CG007X10
5
4.0
100
10
CG008X10
5
Cable guard
Made to order and subject to lead times.
Hockey Sticks
Utility provider
Size
mm
Colour
Code
Pack
qty
UK Power Networks
39
White
HSPV018WHITE
25
SSE
38
Black
HSPV017SEBBLK
25
SSE
38
White
HSPV01WHITE
25
Western Power Distribution
37
White
HSPV016WHITE
25
Hockey stick
All dimensions provided are nominal.
117
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
General purpose power
POWER
CLASS 2 AND 3
Power - General purpose (not ENATS compliant)
General Purpose Hockey Sticks, Junctions, End Caps
Diameter
inches
Diameter
mm
Code
Pack qty
General Purpose Duct
2
54
GPHS2
POWER
ACCESSORIES
25
CONNECTORS
General Purpose Duct is an integrally socketed duct manufactured from PVCu. It is a cost-effective
2
54
GPC2
10
alternative to higher specification systems for use in light and medium duty applications. The General
3
89
GPC3
60
Purpose Duct system also includes a range of bends, junctions, hockey sticks and end caps. The system
4
114
GPC4
40
is manufactured to traditional accepted dimensions, but does not meet the requirements of BS EN
6
168
GPC6
15
61386-24:2010. General Purpose Duct is not suitable for Highways England applications and will require
8
206
GPC8
1
approved power ducting, please see Ridgiduct Power on page 114.
General Purpose Ducting
2
54
GPJY2X45
1
3
89
GPJY3X45
1
4
114
GPJY4X45
1
6
168
GPJY6X45
1
8
206
GPJY8X45
1
OD
inches
OD
mm
Wall
thickness
mm
Length
m
Code
Pack qty
2
54
1.5 - 1.7
6
GP2X6B
400
2
54
GPJT2X90
1
3
89
1.8 - 2.2
6
GP3X6B
144
3
89
GPJT3X90
1
4
114
1.8 - 2.1
6
GP4X6B
86
4
114
GPJT4X90
1
6
168
2.2 - 2.9
6
GP6X6B
36
6
168
GPJT6X90
1
8
206
3.2 - 3.6
6
GP8X6B
25
8
206
GPJT8X90
1
General Purpose Bends
Radius
mm
Angle
Code
General purpose
45° Junction
90° JUNCTIONS
LIGHTING
General purpose
90° Junction
Pack qty
2
54
GPEC2
10
3
89
GPEC3
10
4
114
GPEC4
10
6
168
GPEC6
10
8
206
GPEC8
10
Made to order and subject to lead times.
General purpose
End cap
54
225
11.25°
GPB2X11
60
2
54
225
22.5°
GPB2X22
60
2
54
225
45°
GPB2X45
60
2
54
225
90°
GPB2X90
50
3
89
350
11.25°
GPB3X11
25
3
89
350
22.5°
GPB3X22
25
Suretwin
3
89
350
45°
GPB3X45
15
Suretwin is a cost-effective alternative to conventional cable
3
89
350
90°
GPB3X90
10
protection systems where a BBA or ENATS compliant duct is not
4
114
460
11.25°
GPB4X11
10
required. The Suretwin system is currently available in 150mm diameter
4
114
460
22.5°
GPB4X22
10
and meets the stiffness and normal duty impact requirements of
4
114
460
45°
GPB4X45
10
BS EN 61386-24:2010, Type 450 only.
4
114
460
90°
GPB4X90
7
6
168
610
11.25°
GPB6X11
3
6
168
610
22.5°
GPB6X22
3
168
6
168
8
206
8
206
8
206
8
206
610
Suretwin
3
ID mm
OD mm
Length m
Code
Pack qty
150
178
6
GPT150X6B
36
45°
GPB6X45
610
90°
GPB6X90
3
2500
11.25°
GPB8X11
1
2500
22.5°
GPB8X22
1
2500
45°
GPB8X45
1
2500
90°
GPB8X90
1
UTILITIES
INSTALLATION
ADVICE
2
6
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
MOTORWAY
COMMS
END CAPS
General purpose ducting lengths include integral socket.
Note: This product comes in colour grey to black for both pipe and fittings.
All sizes are nominal.
OD
mm
General purpose
Hockey stick
45° JUNCTIONS
a better standard of installation than more robust systems for successful performance. For BBA HAPAS
General purpose bend
RIDGICOIL
POWER
HOCKEY STICKS
Diameter
inches
POWER
CLASS 1
Suretwin Duct
Made to order and subject to lead times.
Note: This product comes in colour grey to black for both pipe and fittings.
118
All dimensions provided are nominal.
All dimensions provided are nominal.
119
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Motorway Comms
POWER
CLASS 2 AND 3
Motorway Communications
Ridgicoil Motorway Communications
Ridgicoil Motorway
Communications
key benefits
Ridgicoil is a coiled twinwall cable protection duct, manufactured
from polyethylene with an excellent impact resistance even at low
Ridgiduct Motorway Communications
temperatures. It has exceptional durability and flexibility, which
We are able to offer Ridgiduct Motorway Communications 94, 100 and 150mm as a sealed
Ridgicoil has a low co-efficient of friction for ease of cable installation.
eliminates the need for specialist bends. With a smooth bore,
system specifically designed for motorway communications applications. Manufactured from
page 122). It complies with BS EN 61386-24:2010, certifying 450N normal duty compression
performance at 23°C and meets the requirements of Series 1500 Specification for Highway Works.
Ridgiduct Motorway Communications Duct
• IP47 rated sealed system (watertight up
to 1 metre)
• BBA HAPAS certified as a fully sealed system
• Complies with BS EN 61386-24:2010,
resistance
Ridgicoil Motorway Communications Duct
OD
mm
Length
m
Code
50
63
50
RC63X50PMCP
94
110
50
RC110X50PMCP
OD
mm
Length
m
Pack
qty
94
110
6
RB94X6PMCPPE/1
95
100
118
6
RB100X6PMCPPE
85
150
178
6
RB150X6PMCPPE
36
• Integral coupler
• Factory installed polypropylene
PA05/05875
PA05/05875
Couplers and Seals
94
CRD94
SRD94/1
100
CRD100
SRD100
150
CRD150
SRD150
temperatures
Seal code
design enables multiple configurations to be assembled. Duct spacers
comply with the requirements of MCHW 1530.
Duct Spacers
Comtite™ Ducting Plug
Duct
ID mm
Description
Comtite™ cable protection plugs, when used in conjunction with the insertable cable grommets,
ensures full compliance with the requirements of Series 1500 Specification for Highway Works
(MCHW) and is the only transit system accredited by the BBA for motorway communications.
When used with Ridgiduct, it completes a certified sealed system.
Code
2 way Duct Spacer (to suit 110mm O.D.)
94
RBS110X2
50
4 way Duct Spacer (to suit 110mm O.D.)
94
RBS110X4
25
6 way Duct Spacer (to suit 110mm O.D.)
94
RBS110X6
12
2 way Duct Spacer (to suit 118mm O.D.)
100
RBS118X2
50
4 way Duct Spacer (to suit 118mm O.D.)
100
RBS118X4
25
6 way Duct Spacer (to suit 118mm O.D.)
100
RBS118X6
12
Length
m
94mm plug
DP94
40
DP100
40
Draw cord
Blanking grommet with rope attachment point
DPG0
10
Draw cord is manufactured from high quality polypropylene to
9mm grommet
DPG9
10
a nominal breaking strength of 5kN.
• BBA HAPAS approved
12mm grommet
DPG12
10
• Allows for rapid fitting, both new and retrofit
14mm grommet
DPG14
10
16mm grommet
DPG16
10
18mm grommet
DPG18
10
• Design resists ejection from the cable protection
21mm grommet
DPG21
10
• All 4 ports can be utilised by the use of
24mm grommet
DPG24
10
27mm grommet
DPG27
10
4 x 9mm grommet
DPG9X4
10
7 x 9mm grommet
DPG9X7
10
to 1 metre)
• Integral test valve
an additional draw cord bracket
• Blanking grommet with rope attachment point
Made to order and subject to lead times.
4 grommets required per plug. In order to achieve a sealed plug,
use a blanking grommet where cable grommet is not required.
Patented product.
All dimensions provided are nominal.
Duct spacers
Made to order and subject to lead times.
Note: Highways England requires 1 per metre.
Comtite™ Ducting Plug
Description
Pack
qty
Code
100mm plug
• IP47 rated sealed system (watertight up
INSTALLATION
ADVICE
installations of all 94 and 100mm diameter ducts. The unique modular
1 coupler and 2 seals per joint.
120
applications
High quality injection moulded spacers are available to secure multiple
• Good impact resistance even at lower
Coupler code
UTILITIES
• Low weight, high strength
• Can be used for trenchless
Duct Spacers
• Can be used for trenchless applications
• Low weight, flexible, durable and high strength
LIGHTING
• Optional sealing rings for
sealed system
ID
mm
MOTORWAY
COMMS
twine and coupling
• Network Rail PADS approved
Comtite™ Ducting Plug
key benefits
• Long coil lengths for reduced
the need for specialist bends
Type 450N, normal duty impact resistance
• Supplied with an integral coupler
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
• Flexibility of coiled duct eliminates
Made to order and subject to lead times.
Conforms to Highways Agency Specification for sealed systems.
For Scottish market printed Motorway Comms/Power.
Other print options available.
• Print options available
POWER
ACCESSORIES
• Ease of use and transportation
jointing
ID
mm
Code
• Network Rail PADS approved
ID
mm
RIDGICOIL
POWER
• Complies with BS EN 61386-24:2010,
Type 450N, normal duty impact
HDPE, Ridgiduct is fully integrated with Polypipe access boxes (refer to Lighting section,
Ridgiduct Motorway
Communications key benefits
POWER
CLASS 1
Draw Cord
Pallet
qty
Code
6mm dia. x 220m
160
DC220
6mm dia. x 500m (wooden drum)
72
DC500
Description
Draw cord
Special note for applications subject to Highways England requirements
It should be noted that a number of versions of the Manual of Contract Documents for Highway Works are in use and individual contracts can be
subject to substantial variation. Suitability should always be checked with the overseeing organisation. Products selected should be BBA approved or
meet the requirements of Table 5/2 unless exceptional requirements demand an alternative. It should also be noted that there are differences between
requirements for ducts in Series 500 and 1500 of the Specification for Highway Works.
All dimensions provided are nominal.
121
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Lighting
POWER
CLASS 2 AND 3
Lighting
Ridgicoil Lighting
Ridgicoil is a coiled, twinwall cable protection duct, manufactured from polyethylene with an excellent impact
RIDGICOIL
POWER
resistance even at low temperatures. It has exceptional durability and flexibility, which eliminates the need for
Ridgiduct Lighting
specialist bends. With a smooth bore, Ridgicoil has a low co-efficient of friction for ease of cable installation.
Ridgiduct Lighting is a twinwall, low weight, flexible cable protection system, specially
Ridgicoil Lighting Duct
manufactured from HDPE in orange for use in street lighting and traffic signal applications.
ID
mm
A full range of access and junction boxes, bends, reducers and adaptors are available.
Ridgiduct Lighting
key benefits
• Complies with BS EN 61386-24:2010,
Type 450N, normal duty impact resistance
• BBA and BBA HAPAS approved
Ridgiduct Lighting Duct
ID
mm
OD
mm
Length
m
94
110
6
OD
mm
Length
m
Code
50
63
50
RC63X50O(SL or TS)
94
110
50
RC110X50O(SL or TS)
Available with street lighting (SL) or traffic signal (TS) print. Please specify with order.
Code
Pack qty
RB94X6O(SL or TS)
95
100
118
6
RB100X6O(SL or TS)
85
150
178
6
RB150X6O(SL or TS)
36
Ridgicoil Lighting
key benefits
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
• Complies with BS EN 61386-24:2010,
Type 750N, normal duty impact
MOTORWAY
COMMS
• Network Rail PADS approved
PA05/05875
Note: Sizes 63mm
and 110mm only.
Made to order and subject to lead times.
Available with street lighting (SL) or traffic signal (TS) print. Please specify with order.
• Ease of use and transportation
• Long coil lengths for
reduced jointing
LIGHTING
• Factory installed polypropylene
• Good impact resistance, even at low
twine and coupling
temperatures
requirement for special bends
POWER
ACCESSORIES
resistance
• Network Rail PADS approved
• Flexible in application, with a minimal
POWER
CLASS 1
PA05/05875
• Low weight high strength
Note: 100mm
and 150mm only.
• Can be used for trenchless
UTILITIES
applications
• Available with print options for street
lighting and traffic signals
• Supplied with an integral coupler
• Low weight, flexible, durable
Lighting in Scotland has specific requirements and for this purpose we manufacture a single wall cable
and high strength
protection range. Supplied with 1 coupling fitted per length.
Scottish Lighting Purple Cable Protection & Fittings
Polyduct Lighting
Description
Polyduct Lighting is a single wall alternative to twinwall cable protection. Manufactured in orange HDPE, it can be used in either open
trench or trenchless applications.
Polyduct Lighting Duct
Polyduct Lighting
INSTALLATION
ADVICE
Scottish Lighting
ID
mm
OD
mm
Wall
thickness
mm
Length
m
50
60
5
6
PD5060X6O(TS or SL)
250
Code
Size
mm
ID
mm
Code
SCOTTISH LIGHTING SINGLE WALL CORRUGATED
100m Scottish
Lighting coil
60
53
SSL60X100P
40m Scottish
Lighting coil
100
90
SSL100X40P
SCOTTISH LIGHTING JUNCTION BOXES
Pack qty
100
SSLJB100
SCOTTISH LIGHTING CONNECTORS
56
63
3.5
6
PD5663X6O(TS or SL)
250
60
SSLC60
100
107
3.5
6
PD100107X6O(TS or SL)
85
100
SSLC100
97
107
5
6
PD97107X6O(TS or SL)
85
Available with street lighting (SL) or traffic signal (TS) print. Please specify with order.
Scottish Lighting Coil
SCOTTISH LIGHTING REDUCERS
Slotted
100 X 60
SSLR100X60Slot
Unslotted
100 X 60
SSLR100X60
SCOTTISH LIGHTING END CAP
100
Polyduct Lighting Bends
Polyduct Lighting bend
122
All dimensions provided are nominal.
OD
mm
Angle
Radius
mm
60
45º
350
PDB60X45O
25
60
90º
225
PDB60X90O
25
63
45º
350
PDB63X45O
25
Code
Pack qty
63
90º
225
PDB63X90O
25
107
45º
450
PDB107X45O
1
107
90º
450
PDB107X90O
1
SSLEC4PIN
Made to order and subject to lead times.
Purple as standard. Other colours available on request. Minimum order 50 coils.
Scottish Lighting
end cap
Scottish Lighting
slotted reducer
All dimensions provided are nominal.
123
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Lighting
POWER
CLASS 1
POWER
CLASS 2 AND 3
Lighting
Composite covers
Advanced skid resistance composite covers are available for the range
RIDGICOIL
POWER
of pole and access boxes. Manufactured in high strength,
Pole boxes
POWER
ACCESSORIES
fibre-reinforced polyester resin and to BS EN 124 Class B 125.
The range of 4 pole boxes is available in 290 x 275mm and 450 x 450mm sizes, incorporating integral housings for 114 and 140mm
poles and are manufactured from polyethylene. The pole box provides 450mm depth of cover as standard, extendable if required
using modular access boxes as rising sections.
Pole housing
Pole boxes and access boxes
key benefits
Composite Covers
Composite Cover Frames
Code
Nominal size mm
Code
Nominal size mm
CC290275
290 x 275
CCF290275L
290 x 275
CC450300
450 x 300
CCF450300L
450 x 300
CC450450
450 x 450
CCF450450L
450 x 450
CC600450
600 x 450
CCF600450L
600 x 450
CC600600
600 x 600
CCF600600L
600 x 600
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
Composite cover
MOTORWAY
COMMS
A locking frame is required and must be ordered separately.
• Robust, single-piece injection or
rotational mouldings
LIGHTING
• High strength, structured wall construction
• Manufactured in impact resistant
Opening
• Corrosion free and chemical resistant material
• Ultraviolet light resistant material, suitable
for extended storage periods
• Light, easy to handle, transport and install
• Modular construction, allowing access boxes
to be used as rising sections as required
• Pre-trepanned points of entry
Galvanised steel covers
Pole Boxes
polyethylene for installation in all conditions
Code
External
Pole
housing
Description
Height
mm
Width
mm
Depth
mm
Width
mm
Depth
mm
ID
mm
Galvanised steel covers and frames are manufactured to the FACTA
(Fabricated Access Cover Trade Association) Class B specification,
PB2902751
290 x 275
615
320
305
690
415
114
areas subject to slow moving wheel loads, including footways,
PB2902752
290 x 275
615
320
305
690
415
140
pedestrian areas, car parks and verges.
PB4504501
450 x 450
605
465
465
875
600
114
PB4504502
450 x 450
605
465
465
875
600
140
Made to order and subject to lead times.
The clear opening for boxes is greater than the clear opening for frames.
to accommodate 54, 63, 110 and 118mm
outside diameter ducting
• Can also be stacked
UTILITIES
equivalent to BS EN 124 Class B 125. Typical places of installation include
INSTALLATION
ADVICE
Galvanised Steel Covers & Frames
Code
Nominal size mm
GCF290275
290 x 275
GCF450300
450 x 300
GCF450450
450 x 450
GCF600450
600 x 450
GCF600600
600 x 600
Galvanised steel cover
Access boxes
Access boxes are available in 5 sizes, from 290 x 275mm
to 600 x 600mm to allow access to cabling.
Ductile iron covers and frames
Ductile iron access box covers are manufactured to BS EN 124 Class B 125.
Access Boxes
Opening
Ductile Iron Covers & Frames
External
Code
Description
Height
mm
AC2902751
290 x 275
307
320
310
385
375
DCF450450
450 x 450
AC4503001
450 x 300
305
485
330
550
395
DCF600450
600 x 450
AC4504501
450 x 450
330
475
475
545
545
DCF600600
600 x 600
AC6004501
600 x 450
320
635
485
700
550
AC6006001
600 x 600
320
635
635
700
700
Width
mm
Depth
mm
Width
mm
Depth
mm
Code
Made to order and subject to lead times.
Clear opening mm
Ductile iron cover
The clear opening for boxes is greater than the clear opening for frames.
See the relevant tables for details of clear opening frames.
124
All dimensions provided are nominal.
All dimensions provided are nominal.
125
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Utilities
POWER
CLASS 1
POWER
CLASS 2 AND 3
Utilities
Ridgiduct Utilities
Ridgiduct is a lightweight, twinwall cable protection system that can
RIDGICOIL
POWER
be manufactured in a range of NJUG classification colours, from HDPE,
Our range of utility ducting is available in a variety of NJUG classification colours to provide cable protection
POWER
ACCESSORIES
to meet the cable protection needs of all utilities applications.
for electricity, street lighting, motorway communications, gas, water, cable TV and telecommunications.
Ridgiduct Utilities
KEY - Typical colour coding
ID mm
OD mm
Length m
Code
Colours
94
110
6
RB94X6
*
95
100
118
6
RB100X6
85
Blue (BL) - Water
*
150
178
6
RB150X6
*
36
Purple (P) - Street Lighting (Scotland)
Green (G) - Cable Television
225
266
6
RB225X6**
*
14
Purple (P) - Motorway Communications
Grey (GR) - Telecommunications
300
354
6
RB300X6**
*
9
Black (B) - Electricity
Yellow (Y) - Gas
Orange (O) - Street Lighting
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
Pack qty
*Please check the requirements of the utility company, who may stipulate a requirement for
perforated duct. For perforated duct please see Gas Ducting below. **Not BBA approved.
Ridgiduct Utilities
key benefits
MOTORWAY
COMMS
• Complies with BS EN 61386-24:2010,
Type 450N, normal duty
impact resistance
Ridgicoil Utilities
Ridgicoil Utilities key benefits
ducting manufactured from polyethylene for underground utilities.
• Complies with BS EN 61386-24:2010,
bore has a low co-efficient of friction for ease of cable installation.
Type 450N, normal duty impact resistance
• Manufactured in polyethylene with excellent
impact resistance at low temperatures
• Long coil lengths for reduced jointing
• Factory installed polypropylene twine
and coupling
• Optional sealing rings for sealed system
• Supplied with an integrated coupler
• Low weight, flexible, durable and high strength
PA05/05875
• Network Rail PADS approved
• Low weight, flexible, durable
Ridgicoil’s flexibility eliminates the need for special bends and the smooth
and high strength
Gas ducting
• Good impact resistance at low
Some utility companies specify this product and stipulate a perforated
Ridgicoil Utilities
• Network Rail PADS approved
LIGHTING
• BBA HAPAS approved
Ridgicoil is a strong yet flexible alternative to conventional twinwall
Code
Colours
gas duct is used. Our gas ducting is a PVCu single wall perforated duct,
ID mm
OD mm
Length m
31
40
50
RC40X50
40
50
50
RC50X50
50
63
50
RC63X50**
60
75
50
RC75X50
OD mm
Length m
Description
Code
71
90
50
RC90X50
60
25
Perforated
LD6025YGAS
94
110
50
RC110X50**
60
50
Perforated
LD6050YGAS
140
160
25
RC160X25
60
150
Perforated
LD60150YGAS
100
25
Perforated
LD10025YGAS
100
50
Perforated
LD10050YGAS
supplied in yellow and manufactured to BS 4962.
*
*
*Please check the requirements of the utility company, who may stipulate a requirement
for perforated duct. For perforated duct please see Gas Ducting on page 127.
**Network Rail PADS approved.
temperatures
• Available from stock
• Available in a range of colours
which comply with NJUG
Gas Ducting
*
UTILITIES
INSTALLATION
ADVICE
classifications
• Supplied with an integral coupler
• Print options available
Note: Sizes 63mm and 110mm only for coiled duct, couplings
and seals.
PA05/05875
Ducting accessories
Ridgicoil couplings & seals
Ridgicoil Couplings
OD mm
Ridgicoil coupling
Ridgicoil Seals
Size mm
Code
Pack qty
OD mm
Code
Pack qty
40
RCC40
10
40
RCS40
10
50
RCC50
10
50
RCS50
10
63
RCC63*
10
63
RCS63*
10
75
RCC75
10
75
RCS75
10
90
RCC90
10
90
RCS90
10
110
RCC110*
10
110
RCS110*
10
160
RCC160
10
160
RCS160
10
*Network Rail PADS approved
Gas ducting
Ridgiduct Accessories
Code
Pack qty
SINGLE SOCKET FIXED BELLMOUTH
94
RBBM94
1
100
RBBM100
1
125
RBBM125
1
150
RBBM150
1
PLASTIC END CAP
94
RBEC94
1
100
EC1059
1
125
EC3051
1
150
EC1778
1
Single socket fixed bellmouth
Made to order and subject to lead times. End caps may be red or yellow.
Ridgicoil seals
PA05/05875
Plastic end cap
126
All dimensions provided are nominal.
127
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Utilities
POWER
CLASS 2 AND 3
Utilities
RIDGICOIL
POWER
PVCu Cable TV Duct
PVCu specification and utility ducts
A range of specialist PVCu telecommunications ducting systems, manufactured
Our specification and utility ducts are widely and successfully used for the
in accordance with dimensions and performance requirements tried and tested
carriage of all types of services in a range of applications including
by the telecommunications industry.
industrial, domestic and commercial. Specification ducts are more robust
than General Purpose Duct. PVCu utility ducts were the first widely
available thermoplastic ducts and are available in a number of different
PVCu Cable TV Duct
PVCu Cable TV Duct
key benefits
• Durable, high quality construction
• Low co-efficient of friction for easy cable
installation
ID mm
OD mm
Length m
Code
Colours
49
54
6
TD54X6
90
96.5
6
TD96X6
Pack qty
400
121
*
Made to order and subject to lead times.
Available in green (G) or grey (GR). Please specify with order.
*90mm green and grey duct meet the requirements of BS EN 50086.
• A short 54mm branch on swept tees for
• PVCu telecommunication ducts include integral
sockets and are available in green as standard.
Grey and other colours are also available on
Description
Code
96 x 54mm
Colours
OD
mm
Length
m
110
6
160
6
PVCu Cable TV bend
PVCu Cable TV Bends
OD mm
Angle
Code
54
11.25°
TDB54X11G
60
54
22.5°
TDB54X22G
60
54
45°
TDB54X45G
60
54
90°
TDB54X90G
50
TDB96X11 (G or GR)
15
Colours
Pack qty
96.5
22.5°
TDB96X22 (G or GR)
15
96.5
45°
TDB96X45 (G or GR)
15
96.5
90°
TDB96X90 (G or GR)
10
Made to order and subject to lead times.
Available in green (G) or grey (GR). Please specify with order.
PVCu Cable TV coupling
95
110
SDC110
1
compliance with BS 4660
SD160X6B
46
160
SDC160
1
available sealed and unsealed
Code
Colours
Pack qty
54mm
TDC54G
10
54mm slip
TDSC54G
10
96mm
TDC96G
50
96mm slip
TDSC96G
50
96.5mm duct repair kit
0.5
Made to order and subject to lead times.
Components for repairing sections of damaged duct.
LIGHTING
UTILITIES
Pack
qty
110
11.25°
SDB110X11
1
110
22.5°
SDB110X22
1
110
45°
SDB110X45
1
110
90°
SDB110X90
1
160
11.25°
SDB160X11
1
160
22.5°
SDB160X22
1
160
45°
SDB160X45
1
160
90°
SDB160X90
1
Code
INSTALLATION
ADVICE
Made to order and subject to lead times. Grey to black in colour as standard, other
colours available on request.
OD
mm
Length
m
110
6
160
6
Type 4660 bend
Type BS4660 Couplings
Pack
qty
ID mm
Code
Pack qty
SD110X6BPE
95
110
UG402B
1
SD160X6BPE
46
160
UG602B
1
Code
Made to order and subject to lead times.
(Dimensions compliant only)
Made to order and subject to lead times.
Note: Order couplings separately.
Type BS4660 coupling
Type BS4660 Bends
PVCu Cable TV Duct Repair Kit
Standard length m
4660 ducting in dimensional
Made to order and subject to lead times.
Grey to black in colour as standard, other
colours available on request.
Angle
Made to order and subject to lead times.
Description
Pack qty
OD
mm
Type BS4660 Sealed Duct
PVCu Cable TV Couplings
Description
SD110X6B
Code
MOTORWAY
COMMS
• 110 and 160mm OD Type
ID mm
Code
Type 4660 Bends
request subject to minimum order quantities
11.25°
Type 4660 Couplings
and gas services
Pack
qty
15
Made to order and subject to lead times.
96.5
• 110 and 160mm utility ducting
services, telecommunications
Type 4660 Non-Sealed Duct
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
Pack qty
TDJT96X54G
and lead times
PVCu specification
and utility duct
key benefits
POWER
ACCESSORIES
for electrical cables, water
sizes to suit all common specification requirements.
Made to order and subject to lead times.
(Dimensions compliant only)
PVCu Cable TV Swept Tees
trouble-free installation in congested
footways
POWER
CLASS 1
Code
DRK096
Pack qty
1
OD
mm
Angle
110
45°
SDB110X45PE
1
110
90°
SDB110X90PE
1
160
45°
SDB160X45PE
1
160
90°
SDB160X90PE
1
Made to order and subject to lead times.
Code
Pack
qty
Type BS4660 bend
PVCu Cable TV duct repair kit
128
All dimensions provided are nominal.
All dimensions provided are nominal.
129
CABLE
PROTECTION
OVERVIEW
SECTION 9
www.polypipe.com/cable-protection
Installation advice
POWER
CLASS 2 AND 3
Installation advice
Installation information
Procedure (unsealed)
Covers and frames
Suitable surround material should also be used to
Ridgiduct twinwalled high density polyethylene (HDPE)
Joints are made by a simple push-fit of one cable protection
Access box covers and frames should meet the
should extend to 100mm above the cable protection.
cable protection must be installed in accordance with
length into the coupler attached to the adjacent length,
requirements of BS EN 124 Class B 125. In carriageways
Polypropylene draw cords should be provided in each
general requirements and any additional site requirements.
ensuring that the connection is fully made. Inspection points
or other locations where vehicles may run over access
cable protection with no knots or joints and should
The general requirements are to be in accordance with
can be made in the conventional manner depending upon
boxes, heavier grades of cover may be required.
extend a minimum of 1 metre into each access box.
MCHW, Volume 3, as shown below. Cable protection laid
the type of services to be installed.
General
Pole and access boxes
In footways, cable protection for signal post cables
Cable protection ducting is easily connected to the
in depths of cover, other than those specified below, must
be laid in accordance with the procedures described in the
contract with Highways England (HE). Ridgiduct must
POWER
CLASS 1
Pole and access box installation advice
fill any voids between multiple cable protection and
be adequately protected against damage from site
We recommend that the systems be installed in general
and linking cables must have minimum cover depths of
selected entry point. The pre-trepanned section for
construction traffic and from agricultural or similar operations.
accordance with the traffic control signals unit (TCSU)
450mm and 250mm respectively. The minimum depth
the size of cable protection to be used can be cut out
When used as cable protection for fibre optic cabling, the
specification. Our pole and access boxes are designed to meet
of cover in carriageways is 600mm. Subject to local cable
with a knife or hole saw. The cable protection should
recommendations in BS 7718:1996 should be followed.
the requirements of the TCSU, making installation easy and
protection specification, cable protection should be
be inserted through the opening and cut to length.
bedded on 100mm of compacted bedding material.
Boxes that may be subject to traffic loading are
Cable protection lengths must be continuous and fully
typically installed as illustrated.
trouble-free. Local specifications and requirements may apply.
RIDGICOIL
POWER
POWER
ACCESSORIES
THEGENERAL
GROWING
IMPORTANCE
PURPOSE
OF
SUDS
POWER
MOTORWAY
COMMS
LIGHTING
jointed, with the printing placed uppermost when laying.
UTILITIES
Typical installations
Typical installation of a 450 x 450mm Access box
subject to vehicle traffic
Typical unsealed standard duct installations
type A shallow ducts (750 - 1200mm cover)
Type B deep cuts
(over 1200mm cover)
Minimum clearance between
duct and drain
INSTALLATION
ADVICE
Tarmac
Concrete
Coarse sand
Type 1 sub-base
Typical installation of a Polypipe
450 x 450mm Pole box
Tarmac
Concrete
Type 1 sub-base
130
Motorway Communications
installations should be in
accordance with MCHW Series
1500. Please call our Technical
Team on +44 (0) 1509 615100
for more information on
installation details, multiple duct
configurations and sealed systems.
131
THE
COMPANY
SECTION 10
www.polypipe.com/civils
The company
INNOVATION
AND RESEARCH
POLYPIPE
PROJECT AND
TECHNICAL
SUPPORT
The company
ONLINE
TECHNICAL
RESOURCES
Polypipe is the UK’s largest plastic pipe systems manufacturer, employing over 2,000 people
and offering the largest product range in the country.
ENABLING
SUSTAINABLE
THE
GROWING
BUILDING
IMPORTANCE
TECHNOLOGY
OF SUDS
LITERATURE
Contents
Unrivalled service
Market leadership
At Polypipe, we design, manufacture and deliver some of
As a respected industry leader, Polypipe continues to develop
the most advanced thermoplastic products and systems in
innovative products and solutions to meet changing market
the UK. Through our commitment to industry expertise and
needs and growing demands. Customers trust us to provide fully
our dedication to the highest standards of quality, we not only
engineered solutions for the growing diversity and complexity
provide superior products, but superior standards of service.
of the construction challenges they face. We have a significant
Company overview
132 - 133
Our Support Teams are here to help you at every stage of
UK manufacturing base that guarantees availability through
Innovation and research
134 - 135
your project, from planning through to maintenance. Through
a nationwide network of stockists and a dedicated, owned
our sustainability drive you can rest assured that by using a
and managed logistics fleet.
Polypipe project and technical support
136 - 137
Online technical resources
138 - 139
Polypipe product, you are ensuring that your project takes
the utmost environmental considerations into account.
Brand values
The broadest product range
At Polypipe, we seek to deliver constant improvements
Offering well over 20,000 product lines, Polypipe has an
product research and innovation, employing and retaining
enviable reputation amongst installers, contractors, stockists
some of the most respected experts in the field and delivering
and specifiers for being able to provide exactly the right
the highest standards of customer service, value and reliability.
solution for any project. With over 100 product systems,
We also define and drive quality in pipe manufacture and
our unmatched portfolio offers dependable, innovative
performance and use leading-edge technology to deliver
solutions for pressure and non-pressure applications,
whole-life value and sustainability by providing systems
enabling the movement of water, air, power, chemicals
engineered to perform.
in construction industry best practice by leading the way in
SECTION 10
The company
Enabling sustainable building technology
140
Literature
141
The European Plastic Pipes and Fittings Association
Channelling Performance
and telecommunications throughout the built environment.
Q 06225
132
EMS 535794
133
THE
COMPANY
SECTION 10
www.polypipe.com/civils
The company
INNOVATION
AND RESEARCH
POLYPIPE
PROJECT AND
TECHNICAL
SUPPORT
Innovation and research
ONLINE
TECHNICAL
RESOURCES
At Polypipe, we always aim to bring innovative new products to the market in direct response
to our customers’ needs, requirements and feedback.
ENABLING
SUSTAINABLE
THE
GROWING
BUILDING
IMPORTANCE
TECHNOLOGY
OF SUDS
LITERATURE
Challenging convention
Quality control
We have always challenged convention by exploring new ways to meet the needs of the
We invest heavily in research and new production technology. This allows us to provide more
construction industry. Chief among them has been the development of thermoplastic
precise performance specifications, greater reliability and high quality products that are BBA,
piping systems to replace traditional concrete and clay materials. This results in solutions
BSI Kitemark and WRc approved. Supporting our product accreditations, our business systems
that are lighter in weight whilst also being tougher and more adaptable, ultimately
are regularly assessed by BSI to ensure we maintain our BS EN ISO 9001:2008 and BS EN ISO
making them more sustainable. Our priority is to always provide the industry with
14001:2004 certifications. This ensures we conform to regulatory requirements and that we
robust and innovative solutions that meet the demanding performance criteria of
provide greener credentials for our products.
today’s construction projects.
Customer driven innovation
Testing and certification
We work closely with regulatory bodies to ensure our products meet all UK and international
We look to do things efficiently and to the highest standards, not only acting on
regulations for performance and sustainability; a vital consideration in an industry where
customer requirements but also being proactive with project demands and meeting
compliance and certification are absolute priorities. Wherever possible, our products are
all changes in legislation. We value process innovation, strong manufacturing
covered by third party accreditations, including BBA, BSI Kitemark, WRc and Network Rail
investment and product development. However, our prime concern is always to
Parts and Drawing Systems (PADS) approval.
deliver the very highest quality for our customers in manufacturing, materials,
service and supply.
Expert staff
BB
BBA
APPROVAL
INSPECTION
TESTING
CERTIFICA
CERTIFICATION
CERTIFICATE No. 00/3678
CERTIFICA
Our materials and product development specialists represent some of the leading
authorities in the industry. Many even have influential positions on trade bodies
including the British Plastic Federation (BPF). It is their knowledge and experience
that allows us to offer the very highest standards of product design and development.
UKAS accredited factories
Our UKAS accredited Berry and Hayward laboratory allows us to develop and test new materials
and products 24 hours a day. This ensures that our products represent the best possible solution
and significantly reduces the time in which new products can be brought to the market.
134
135
THE
COMPANY
SECTION 10
The company
Polypipe project and technical support
www.polypipe.com/civils
INNOVATION
AND RESEARCH
POLYPIPE
PROJECT AND
TECHNICAL
SUPPORT
ONLINE
TECHNICAL
RESOURCES
ENABLING
SUSTAINABLE
THE
GROWING
BUILDING
IMPORTANCE
TECHNOLOGY
OF SUDS
LITERATURE
136
137
THE
COMPANY
SECTION 10
www.polypipe.com/civils
The company
INNOVATION
AND RESEARCH
POLYPIPE
PROJECT AND
TECHNICAL
SUPPORT
Online technical resources
ONLINE
TECHNICAL
RESOURCES
At Polypipe, we offer a comprehensive selection of downloadable product and technical literature that
is available on our website to provide you with detailed information about our systems and solutions.
ENABLING
SUSTAINABLE
THE
GROWING
BUILDING
IMPORTANCE
TECHNOLOGY
OF SUDS
LITERATURE
Brochures and technical manuals
We provide an extensive range of brochures and technical
manuals, which contain topics including:
•
Structural design
•
Hydraulic performance
•
Chemical resistance
•
Applications
•
Installation guidance
•
•
Installation guides, Health and
Safety and COSHH datasheets
Available to download are all the BBA and WRc certificates
Guidance for easy, safe product handling, loading,
needed to support your specification or contract.
off-loading and installation is available along with
product safety information (COSHH) – supported by
Specification clauses, CAD
drawings and technical datasheets
materials safety datasheets – which are also available
Maintenance
Our toolbox contains downloadable CAD drawings and
Structural performance
specification clauses to ensure full design, manufacture
Case studies
•
Pollution control
and installation compliance, plus a full range of technical
•
Minimum cover depths
datasheets covering every product.
Technical bulletins
www.polypipe.com/toolbox
Standards, approvals
and certifications
to download from our website.
Our website provides a broad range of recent case
studies, including everything from infrastructure
projects for roads, motorways, airports and energy,
to residential developments, education, commercial
and water company Capital Works projects.
These bulletins offer an overview of the benefits offered by our
products and guidance on the typical applications they can be
used for as well as explanations of compliance requirements.
138
139
THE
COMPANY
SECTION 10
www.polypipe.com/civils
The company
Enabling sustainable building technology
At Polypipe, we provide plastic piping systems that enable the effective installation and performance
of sustainable building technology, helping meet the twin global challenges of carbon reduction and
water management.
INNOVATION
AND RESEARCH
POLYPIPE
PROJECT AND
TECHNICAL
SUPPORT
Literature
All of our literature is available
at www.polypipe.com/toolbox
Product literature
ONLINE
TECHNICAL
RESOURCES
ENABLING
SUSTAINABLE
THE
GROWING
BUILDING
IMPORTANCE
TECHNOLOGY
OF SUDS
LITERATURE
Permavoid
Technical Manual
Ridgistorm-XL
Technical Manual
Polystorm
Technical Manual
Polypipe Civils and
infrastructure
Pocket Guide
Solutions literature
WMS Sector
Brochure
Water management solutions
Sector focus
Roof to River
Our product systems respond directly to sector-specific
Offering a comprehensive range of standalone and
requirements thanks to focused Technical and Development
modular SuDS products, rainwater harvesting and surface
Teams with hands on expertise in the following areas:
water treatment solutions, plus legislative and technical
Civils and infrastructure
support services, our Water Management Solutions Team
address the requirements of every construction and civil
engineering project.
Carbon efficient solutions
Sustainable indoor environments
numbers appearing under each brochure.
project planners a complete suite of solutions.
Residential
We offer the broadest range of residential product
as well as innovative solutions in response to legislative and
demand for greener building products and technologies.
industry targets for more sustainable housing.
Commercial
Major commercial projects from car parks and high rise office
blocks to hospitals, educational premises and shopping centres
have all benefited from our range of value engineered products
and comprehensive service support.
140
visit www.polypipe.com or contact the telephone
All of our literature is available
at www.polypipe.com/toolbox
in-house Fabrications Team, offer civils and infrastructure
and service solutions for both new build and RMI applications,
heating, ventilation and cooling systems.
Additional market sector literature is available, please
drainage and cable management systems, supported by our
of environmentally conscious customers are driving the
enable collection, transmission, emission and control in
Market sector literature
Delivering performance and sustainability, our surface water
Ever stricter building regulations and an increasing number
We fulfill this demand with a full range of systems that
Rail Solutions
Brochure
UK
Residential
Civils and Infrastructure
Commercial
+44 (0) 1709 770000
+44 (0) 1709 770000
+44 (0) 1509 615100
+44 (0) 1622 795200
All descriptions and illustrations in this publication are intended for guidance only and shall not constitute a ‘sale by description’. All dimensions given are nominal and Polypipe may modify
and change the information, products and specifications from time to time for a variety of reasons, without prior notice. The information in this publication is provided ‘as is’ on January 2016.
Updates will not be issued automatically. This information is not intended to have any legal effect, whether by way of advice, representation or warranty (express or implied). We accept no
liability whatsoever (to the extent permitted by law) if you place any reliance on this publication you must do so at your own risk. All rights reserved. Copyright in this publication belongs to
Polypipe and all such copyright may not be used, sold, copied or reproduced in whole or part in any manner in any media to any person without prior consent.
is a registered
trademark of Polypipe. All Polypipe products are protected by Design Right under CDPA 1988. Copyright © 2016 Polypipe. All rights reserved.
141
Notes
142
www.polypipe.com/civils
143
Civils & Infrastructure
Product Guide
Civils & Infrastructure
Polypipe Civils
Charnwood Business Park
North Road, Loughborough
Leicestershire
LE11 1LE
Tel +44 (0) 1509 615100
Fax +44 (0) 1509 610215
Email [email protected]
www.polypipe.com/civils
Printed on 100% recyclable chlorine-free paper. All inks used on this brochure are vegetable based.
www.polypipe.com
www.polypipe.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement