Quick Reference Guide (Download PDF, 994KB)

Quick Reference Guide (Download PDF, 994KB)
2014 Infiniti QX80
1591592_14b_Infiniti_QX80_QRG_093013.indd 3
Quick Reference Guide
9/30/13 9:34 AM
01
02
13
04
03
05
07
06
08
14
09
10
Behind
steering wheel
on column
15
16
11
20
18
16
17
12
19 17
Behind
shift lever
21
01 INSTRUMENT BRIGHTNESS CONTROL SWITCH*
12 HOOD RELEASE*
02 TRIP COMPUTER SWITCHES
13 CONTROL PANEL DISPLAY SCREEN*
03 HEADLIGHT AND TURN SIGNAL SWITCH
14 AUDIO SYSTEM
04 WINDSHIELD WIPER AND WASHER SWITCH
05 STEERING WHEEL SWITCHES FOR AUDIO* /
BLUETOOTH® / NAVIGATION
06 CRUISE CONTROL
15 CLIMATE CONTROL SYSTEM
16 CLIMATE CONTROLLED SEAT KNOBS*
17 TIP-UP 2ND ROW SEAT SWITCHES
07 WARNING SYSTEMS SWITCH*
18 HEATED STEERING WHEEL SWITCH*
08 POWER LIFTGATE SWITCH
09 TILT / TELESCOPIC STEERING WHEEL SWITCH*
19 POWER OUTLET*
10 DYNAMIC DRIVER ASSISTANCE SWITCH*
20 FRONT PASSENGER AIR BAG STATUS LIGHT*
11 POWER LIFTGATE MAIN SWITCH*
21 FOUR-WHEEL DRIVE (4WD) SHIFT SWITCH*
*See your Owner’s Manual for information.
1591592_14b_Infiniti_QX80_QRG_093013.indd 4
9/30/13 9:35 AM
table of contents
new system features
Infiniti Connection System™ (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Theater Package (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Around View® Monitor with Moving Object Detection (MOD) . . . . . . . . . . . . . . . 4
Blind Spot Warning (BSW) and Blind Spot Intervention™ (BSI) (if so equipped) . 4
Lane Departure Prevention (LDP) System (if so equipped) . . . . . . . . . . . . . . . . . 4
essential information
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator . . . . . . . . 5
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fuel-filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adaptive Front Lighting System (AFS) (if so equipped) . . . . . . . . . . . . . . . . . . . . . 6
Clock Set/Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
first drive features
INFINITI Intelligent Key System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Automatic Drive Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2nd Row Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3rd Row Power Folding Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Starting/Stopping the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Headlight Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Windshield Wiper and Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Automatic Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Rear Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FM/AM/SiriusXM Satellite Radio with CD/DVD Player . . . . . . . . . . . . . . . . . . 18
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . . . 19
system guide
Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigation System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HomeLink® Universal Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
21
24
25
Please see your Owner’s Manual for important safety information
and system operation limitations.
•A
cellular telephone should not be used for any purpose while
driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
•C
hildren 12 and under should always ride in the rear seat
properly secured in child restraints or seat belts according to
their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)”, “Monitor, climate,
audio, phone and voice recognition systems (section 4)” and
“Starting and driving (section 5)” of your Owner’s Manual.
Additional information about your vehicle is also available in your
Owner’s Manual, Navigation System Owner’s Manual and
at www.InfinitiUSA.com.
1591592_14b_Infiniti_QX80_QRG_093013.indd 5
To view detailed
instructional videos, go to
www.infinitiownersinfo.mobi/2014/qx80
or snap this barcode with an
appropriate barcode reader.
9/30/13 9:35 AM
new s y s te m f e a t u r e s
INFINITI Connection™ System* (if so equipped)
Infiniti Connection™ combines personalized convenience
and concierge settings and personal security features
to compliment the Total Ownership Experience.
For more details on Infiniti Connection™, or to enroll
your vehicle, please visit www.Infiniticonnection.com
or call 855-444-7244.
Available services include:
Infiniti Personal Assistant – To access Infiniti Personal
Assistant, select “Connect to Voice Menu” from the Infiniti Connection menu or touch the
key on the map screen. At the voice prompt, say “Infiniti Personal Assistant” to be connected.
• Your Infiniti Personal Assistant can send destination information directly to your vehicle.
Automatic Collision Notification – In case of air bag deployment, a signal is sent containing
the vehicle location and customer information to a Response Specialist who notifies the
proper authorities.
Emergency Call – This service provides emergency
assistance by connecting subscriber to an Infiniti
Connection™ Specialist.
• I n case of an emergency, press the in-vehicle
telematics SOS button 01 .
• A Response Specialist will provide assistance based
01
on the situation described by the vehicle’s occupant.
Enhanced Roadside Assistance – Roadside Assistance can be accessed by touching the Infiniti
Connection™ key on the Info menu, the
key on the map screen or by pressing the SOS button.
• T his service allows subscribers to receive assistance for a non-emergency incident such
as towing or a third party response.
• I f warranted, Roadside Assistance may also be used in conjunction with the Emergency
Assistance service by pressing the SOS button.
My Schedule – Access your personal online Google Calendar™, hear details read via
text-to-speech** and select locations as a destination via the navigation system.
Report Stolen Vehicle – A Response Specialist will attempt to obtain location information
from a reported stolen vehicle and provide that information to local law enforcement
agencies to assist in the recovery of your stolen vehicle.
Remote Door Lock/Unlock – Remotely access your vehicle via Infiniti Connection Response
Specialist or designated website to remotely lock or unlock your vehicle.
Alarm Notification – This system will notify you when the factory-installed vehicle alarm
system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance notifications based
on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunction that triggers
instrument panel warning lights.
Destination Assistance – Receive point-of-interest assistance via guided IVR (Interactive
Voice Response), or Response Specialist by pressing the
key on the map screen, or
Infiniti Connection™ web portal.
*Infiniti Connection™ is only available on vehicles equipped with optional Infiniti Connection™ subscription service.
2
1591592_14b_Infiniti_QX80_QRG_093013.indd 2
9/30/13 9:35 AM
Destination Send-to Vehicle – Find and download point-of interest information from
Google Maps™. To access, go to the Infiniti Connection menu and select “Sync All
Information Feeds”. Then go to the feeds menu page and download the desired
destination information.
onnected Search – Select “Connected Search” from the Destination menu on the vehicle’s
C
navigation system to conduct a point-of-interest search within a certain distance of the
vehicle’s location.
Drive Zone – Monitor the movement of your vehicle within a specified region. Set up
boundaries in the Monitoring section of the Infiniti Connection™ web portal.
Max Speed Alert – Set up a maximum speed on the Infiniti Connection™ web portal.
You will receive notifications if your vehicle exceeds the max speed setting.
obile Information Service – Receive the latest news headlines, stock quotes and sports
M
scores by setting up preferences on the Mobile Information Service page in the Infiniti
Connection™ web portal.
Valet Alert – Use Valet Alert to set up a 0.2 mile radius around your vehicle.
•Activate alerts by pressing the “Connect to Voice Menu” button on the Infiniti
Connection™ screen or by pressing the
key on the map screen.
•At the prompt, say “Valet Alert” and then “Activate” or “Deactivate”.
**Laws in some communities may restrict the use of text-to-speech. Check local regulations before using this feature.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
Theater Package (if so equipped)
With this entertainment system, you can play video
files via a DVD or CD providing images and sound both
from the front and rear display screens.
You can also connect auxiliary devices such as
video games, camcorders or portable video players
to the auxiliary jacks. (Your device will be controlled
through its own control panel.)
Rear Auxiliary Mode allows rear seat passengers to
independently display different sources on each screen.
Use the remote controller, provided with the system,
to operate the rear display screens.
Use the headphones, also provided with the system,
to listen to audio wirelessly and independently.
To watch or control videos on the front display make
sure the vehicle is in the P (PARK) position and the
parking brake is applied.
To reduce driver distraction, movies will not be shown on the front display while the vehicle is
in any drive position.
To access standard DVD controls on the front display while playing a DVD on the rear display,
press the DISC•AUX button on the audio control panel while the vehicle is in the P (PARK)
position and the parking brake is applied.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
3
1591592_14b_Infiniti_QX80_QRG_093013.indd 3
9/30/13 9:35 AM
new s y s te m f e a t u r e s
Around View® Monitor with Moving Object Detection (MOD)
Moving Object Detection (MOD) operates only with
the Around View® Monitor activated.
•To temporarily turn the system on or off select
the “MOD” key on the bottom of the control
panel display.
When the CAMERA button is pressed and the vehicle
speed is less than 6 MPH (10 km/h) or the shift lever
is moved to the R (REVERSE) position, the Information
Display Screen will automatically change to view the area surrounding the vehicle.
With the Around View® Monitor displayed, the corner sonar system can detect objects
near the vehicle and warn the driver by sounding a tone and showing an indicator in
the display screen.
F or more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
Blind Spot Warning (BSW) and Blind Spot Intervention™ (BSI)
(if so equipped)
The Blind Spot Warning (BSW) system alerts the
driver when another vehicle moves into the vehicle’s
blind spot area.
An indicator light near the outside mirror will
illuminate if the radar sensors detect a vehicle in the
detection zone.
The Blind Spot Intervention™ (BSI) system can assist
the driver in returning the vehicle to the center of the
traveling lane by applying individual brake pressure
to the left or right wheels for a short period of time.
The indicator light will first illuminate in orange and
then turn green before turning off. This indicates
that the Blind Spot Warning (BSW) and Blind Spot
Intervention (BSI) systems are operational.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Lane Departure Prevention (LDP) System
(if so equipped)
This system will help you return the vehicle to the
center direction of the traveling lane by applying
brake control to the left or right wheels individually
(for a short period of time).
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
4
1591592_14b_Infiniti_QX80_QRG_093013.indd 4
9/30/13 9:35 AM
e s s e n t i a l i n f or mat ion
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A CHECK TIRE PRESSURE warning message will appear
in the vehicle information display 01 and the low tire
pressure warning light 02 will illuminate when one or
more tires are low on pressure and air is needed.
•The tire pressures should be
checked when the tires are cold.
The tires are considered cold after
the vehicle has been parked for 3
hours or more or driven less than 1
mi (1.6 km) at moderate speeds.
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and
audible signals to help you inflate the tires to the
recommended COLD tire pressure.
01
02
To use the Tire Inflation Indicator:
1.Move the shift lever to the P (PARK) position and
apply the parking brake.
2. Place the ignition switch in the ON position. Do not start the engine.
3.Add air to the under-inflated tire and within a few seconds, the hazard warning lights
will start flashing.
4.When the designated tire pressure is reached, the horn will beep once and the hazard
warning flashers will stop.
5. Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at speeds above 16 MPH (25 km/h). The
CHECK TIRE PRESSURE warning message and low tire pressure warning light will disappear.
When the low tire pressure warning light flashes for approximately 1 minute and then remains
on, the TPMS is not functioning properly. Have the system checked by an INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and
the outside temperature. Low outside temperature can lower the temperature of the air inside
the tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates, check the tire pressure in your tires.
•Check the tire pressure (including the spare tire) often and always prior to long distance trips.
The Tire and Loading Information label contains valuable information. Please refer to section 9,
“Technical and consumer information” in your Owner’s Manual for the location of the
Tire and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)” , “Starting and driving (section 5)” and the “Maintenance and
do-it-yourself (section 8)” of your Owner’s Manual.
5
1591592_14b_Infiniti_QX80_QRG_093013.indd 5
9/30/13 9:35 AM
essent i al i n f o r m a t i o n
Loose Fuel Cap
02
A LOOSE FUEL CAP warning message will appear
in the vehicle information display 01 when the
fuel-filler cap is not tightened correctly.
To tighten, turn the cap clockwise until a single
click is heard.
01
The warning message will disappear when the
vehicle detects the fuel-filler cap is properly tightened and the reset button 02 is pressed.
If the cap is not properly tightened, the Malfunction Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)” and the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Fuel-filler Door
The fuel-filler door is located on the left, rear side of
the vehicle.
When the doors of the vehicle are locked or
unlocked, the fuel-filler door is automatically
locked or unlocked at the same time.
To open the door, once unlocked, push the right side of the door.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Adaptive Front Lighting System (AFS) (if so equipped)
As your vehicle turns left or right, or drives along winding roads, the AFS system
moves your low beams left or right, according to your vehicle’s steering pattern.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
6
1591592_14b_Infiniti_QX80_QRG_093013.indd 6
9/30/13 9:35 AM
Clock Set/Adjustment
DIGITAL CLOCK ADJUSTMENT
To adjust the time and the appearance of the clock
on the display:
1. Press the SETTING button on the control panel.
2. Touch the Others key.
3. Touch the Clock key.
The following settings can be adjusted:
•
On-screen Clock: The clock in the upper right corner of the display can be turned
ON or OFF.
•
Clock Format (24h): The clock can be set to 12 hours or 24 hours.
•
Offset (hour): The time can be adjusted by increasing or decreasing per hour.
•
Offset (min): The time can be adjusted by increasing or decreasing per minute.
•
Daylight Savings Time: The application of daylight savings time can be turned ON or OFF.
•
Time Zone: Adjust the time zone from the following:
• Pacific
• Atlantic
• Mountain
• Newfoundland
• Central
• Hawaii
• Eastern
• Alaska
Press the
BACK button to return to the previous screen.
ANALOG CLOCK ADJUSTMENT
To set the clock backward, push the button 01 .
To set the clock forward, push the button 02 .
To move forward or backward faster, push and hold
the button for more than 5 seconds.
For more information, refer to the “Instruments and controls (section 2)”
or the “Monitor, climate, audio, phone and voice recognition systems
(section 4)” of your Owner’s Manual.
01
02
7
1591592_14b_Infiniti_QX80_QRG_093013.indd 7
9/30/13 9:35 AM
f i rst dr i v e f e a t u r e s
INFINITI Intelligent Key System
The INFINITI Intelligent Key system allows you to lock
or unlock your vehicle, open your liftgate and start the
engine. It is important to make sure the Intelligent Key
is with you (that is, in your pocket or purse).
01
REMOTE ENGINE START*
T he remote engine start system must be enabled in
the vehicle settings within the vehicle information display.
T he remote engine start operating range is approximately
200 ft (60 m) from the vehicle. The effective operating range
may be shorter due to environmental conditions or obstacles
between you and the vehicle.
F or the remote engine start to function, the vehicle must be
in the P (PARK) position with the ignition off, and all the doors
closed and locked.
To start your vehicle remotely:
06
02
03
04
05
button 02
1. Press the
2.Within 5 seconds press and hold the remote engine start
button 06 for at least 2 seconds.
The engine will start and the parking lights will turn on.
A
utomatic climate control will begin heating or cooling the vehicle depending on the
last used mode.
The engine will run for 10 minutes and then turn off.
Repeat steps 1 and 2 to extend the time for an additional 10 minute period.
•
After two remote starts the ignition switch must be cycled before the remote start can
be used again.
To start driving depress the brake pedal and push the ignition switch START/STOP button.
To lock the vehicle, push either door handle request switch 01 once or press the
02 on the key fob.
button
To unlock the vehicle, perform one of the following procedures:
• Push either door handle request switch 01 once; the corresponding door will unlock. Push
the door handle request switch 01 again within 1 minute; all other doors will unlock, or
•P
ress the button 03 on the key fob to unlock the driver’s side door. Press the
again; all other doors will unlock.
To open the liftgate, press the
button
button 04 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pressing and holding
the button 05 for more than 1 second. Once activated, the panic alarm and headlights
will stay on for a period of time.
8
1591592_14b_Infiniti_QX80_QRG_093013.indd 8
9/30/13 9:35 AM
INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged,
or environmental conditions interfere with the
Intelligent Key operation, start the engine according
to the following procedure:
1. Move the shift lever to the P (PARK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
*Laws in some communities may restrict the use of remote starters. Check local regulations before using this feature.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
Power Liftgate
W
hen the liftgate is closed and locked, the liftgate
will open automatically by:
01
•
Pushing the power liftgate switch 01 on the
instrument panel.
•
Pushing the liftgate opener switch 02 , the
liftgate must be unlocked, or you must have the
Intelligent Key with you (in your pocket or purse).
04
•Pressing the
button 03 on the INFINITI
Intelligent Key for more than 1 second.
T he power liftgate operation can be turned on or
off by the power liftgate main switch 04 on the
instrument panel.
•
When the power liftgate
02
main switch 04 is
pushed to the OFF
position, power operation is not available using
the power liftgate switch located on the lower part of the
liftgate or the liftgate opener switch 02 .
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your
Owner’s Manual.
03
9
1591592_14b_Infiniti_QX80_QRG_093013.indd 9
9/30/13 9:35 AM
f i rst dr i v e f e a t u r e s
Front Seat Adjustments
To slide the seat forward or backward, push the
01 forward or backward.
control switch
To recline the seatback, push the switch
forward or backward.
02 01
02
03
SEAT LIFTER
To raise or lower the front portion or height of
the seat, push the front or back end of the switch
01 up or down.
LUMBAR SUPPORT
To adjust the seat lumbar support, push the front or back end of the switch
03 .
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
•Adjust the driver’s seat, steering column and outside mirrors to the desired positions
using the adjusting switches for each feature.
•Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.
•The indicator light on the memory switch you select will illuminate for approximately
5 seconds.
•The driver’s seat, steering column and outside mirror positions are now set to
your preference.
These memorized positions can also be linked to your INFINITI Intelligent Key. To link a
memorized position to your INFINITI Intelligent Key, press the unlock button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
10
1591592_14b_Infiniti_QX80_QRG_093013.indd 10
9/30/13 9:35 AM
2nd Row Seats
The 2nd row seat can be tipped forward for easy entry to or exit from the 3rd row seat and
can be folded flat for maximum cargo hauling/extra storage space.
TIPPING THE 2ND ROW SEATS FORWARD FOR ENTRY TO THE 3RD ROW
MANUAL CONTROLS
1. Raise the armrest up to the stowed position.
2. L ift up on the seatback release latch A or the
reclining lever B . The seatback will tip forward.
3. Lift up on the lower rear corner of the seat bottom
and tip the seat forward.
2.
3.
A
To return the 2nd row seats to the standard position:
1. P
ush back on the seat to return it to its original
position and lock it in place.
2. P
ull up and push
back on the seatback
to lock it in place.
2.
B
1.
3. U
se the seat reclining
lever B to adjust the seat to the desired position.
POWER REMOTE CONTROLS (if so equipped)
To fold down and tip forward the 2nd row seatback,
push and hold the remote tip-up 2nd row seat switch
01 located on the instrument panel.
The lower corner of the seat base will lift and the
2nd row seat will tip forward.
01
01
FOLDING THE 2ND ROW SEATS FLAT
1. Raise the armrest up to the stowed position.
2. P
ull the seat bottom release strap C to position
the seat bottom forward.
C
3. Pull seat reclining lever B up to fold the
seatback forward.
There is a carpet panel flap on the back side of the
seatback that can be folded toward the back of the
vehicle to provide a level cargo floor when the 3rd
row seats are also folded flat. The center console
(if so equipped) can also be removed.
2.
3.
11
1591592_14b_Infiniti_QX80_QRG_093013.indd 11
9/30/13 9:35 AM
f i rst dr i v e f e a t u r e s
TO RETURN THE 2ND ROW SEATS TO THE
STANDARD POSITION:
1. R
eturn the carpet panel flap to the back side of the
seatback and secure it in place.
B
ull the seat reclining lever B up while you lift up
2. P
and push back on the seatback until it locks in place.
3. R
eturn the seat bottom backward to its original
position until it locks in place.
2.
3.
4. U
se the seat reclining lever to adjust the seat to the
desired position.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)” section of your
Owner’s Manual.
3rd Row Power Folding Seats
The 3rd row seats can be folded flat for maximum
cargo hauling or extra storage space.
Before folding down the 3rd row seats:
• The vehicle’s shift lever must be in P (PARK)
or N (NEUTRAL).
• Place the seat belt buckles in the storage of the seat
cushion 01 to avoid dropping them under the seat
cushion or causing damage to your leather seats.
• Disconnect and secure the center seat belt and
tongues into the retractor base 02 .
01
02
1. To release the seat belt connector tongue, insert
a suitable tool (a key, for example) into the
opening on the side of the connector buckle.
2. Retract the seat belt up to the retractor base located in the rear ceiling storage area.
3. Insert the seat belt tongue into the fabric sleeve
so that it will lay flat.
4. Secure the connector tongue into the retractor base.
5. Always reconnect the center seat belt when the
seat is returned to the upright position.
• Make sure that there are no objects on the
seat cushion.
01
A
B
A
B
• Lower the 3rd row head restraints.
To lower the seat, push and hold the front portion A
of the right or left 3rd row power folding seat switch 01 .
To return the seats to an upright position, press the back
portion B of the right or left 3rd row power folding seat switch 01 .
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of
your Owner’s Manual.
12
1591592_14b_Infiniti_QX80_QRG_093013.indd 12
9/30/13 9:36 AM
Outside Mirror Control Switch
Move the control switch 01 right or left to select the
right or left side mirror.
Adjust each mirror to the desired position using the
switch 02 .
01
02
Move this switch 01 to the center (neutral) position
to prevent accidentally moving the mirror.
03
POWER FOLDING OUTSIDE MIRRORS
position. To unfold the
T o fold the outside rearview mirrors, push the switch 03 to the
outside rearview mirrors, push the switch 03 to the
position.
If mirrors are manually operated or bumped, the mirror body can become loose at the
pivot point.
To correct electronic mirror operation, cycle mirrors by pushing the outside rearview mirror
folding switch 03 to the
position until completely closed, then push the switch 03 to
the
position until the mirror is completely open.
REVERSE TILT-DOWN FEATURE
When backing up the vehicle, the right or left outside mirrors will turn downward automatically
to provide better rear visibility.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the outside mirror control switch.
4. The outside mirror surfaces move downward.
When one of the following conditions has occurred, the outside mirror surfaces will return
to their original positions.
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center (neutral) position.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to start
the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
13
1591592_14b_Infiniti_QX80_QRG_093013.indd 13
9/30/13 9:36 AM
f i rst dr i v e f e a t u r e s
Headlight Control
HEADLIGHT CONTROL
Turn the headlight control switch to the
position 01 to turn on the front parking, side marker,
tail, license plate and instrument panel lights.
Turn the switch to the
position 02 to turn on
the headlights.
03
01
02
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when it
is light. The system will keep the headlights on for a period of time after you turn the ignition
off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 01 or
position 02 .
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light extuiguishes.
04
05
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
06
position 06
Turn the switch (inside collar) to the OFF position to turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
14
1591592_14b_Infiniti_QX80_QRG_093013.indd 14
9/30/13 9:36 AM
Windshield Wiper and Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
TYPE B (if so equipped)
03
01 Mist (MIST) - One sweep operation of the
front wipers.
OFF
AUTO 02
02 Auto (AUTO) - Operates the rain-sensing
auto front wiper system. The rain sensor
sensitivity level can be adjusted by twisting
the time control ring 03 to increase or
decrease wiper sensitivity.
04 Low (LO) - Front wipers operate at a continuous
low speed.
05 High (HI) - Front wipers operate at a continuous
high speed.
01
MIST
LO
04
HI
05
06
09
06 Pull the lever toward you to activate the
front washer. The front wipers will operate
several times.
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper operates
intermittently.
08 Low (ON) - Rear wiper operates at a
continuous low speed.
07
INT
08
ON
09 Push the lever forward to activate the
rear washer. The rear wiper will operate
several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
15
1591592_14b_Infiniti_QX80_QRG_093013.indd 15
9/30/13 9:36 AM
f i rst dr i v e f e a t u r e s
05
06
03
07
08
01
02
04
11
10
09
Automatic Climate Controls
01 AUTO BUTTON/TEMPERATURE CONTROL DIAL
Press the AUTO button and the system will automatically control air flow distribution
and fan speed to achieve and maintain the temperature setting (automatic cooling and/or
dehumidified heating).
Turn the driver’s side temperature control dial to set your desired temperature.
Auto mode may be used year-round and will work to reach a comfortable temperature
quickly. For example on a very hot day, the system will initially operate at maximum air flow
for rapid cool down.
02 DUAL BUTTON/PASSENGER’S SIDE TEMPERATURE CONTROL DIAL
Press the passenger’s side DUAL control button to turn the passenger’s side temperature
controls on or off. This will allow the passenger’s side temperature to be adjusted
independently from the driver’s side control by turning the passenger’s side control.
Turn the passenger’s side temperature control dial left for cooler air or right for warmer air.
03 FAN SPEED CONTROL BUTTONS
Press the fan speed control buttons to manually decrease the fan speed
fan speed
or increase the
.
04 MODE BUTTON
Press the MODE button to cycle through the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
05 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button
to turn the system on. The A/C automatically turns on
when the defroster mode is selected. This feature removes humidity from the air.
Use the temperature control dial 01 to set the desired temperature.
To set the defroster on high, press the fan speed control button
to the maximum setting.
to increase the fan speed
16
1591592_14b_Infiniti_QX80_QRG_093013.indd 16
9/30/13 9:36 AM
06 REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH
Push the rear window defroster switch
This function automatically turns off after approximately 15 minutes.
to turn the system on or off.
07 AUTOMATIC INTAKE AIR CONTROL
In the auto mode, air intake will be controlled automatically.
This mode helps to adjust the inside vehicle temperature more effectively.
To manually control air recirculation inside the vehicle, press the air recirculation
08 . The indicator light on the button will illuminate.
button
To return to the automatic control mode, push and hold the auto-recirculation
07 until the indicator light on the button illuminates.
button
09 UPPER VENT BUTTON
When the upper vent button is pressed, the air flow against the driver’s or
passenger’s upper body becomes gentle. The indicator light on the button will illuminate.
In this mode, air from the upper ventilator flows to control the cabin temperature without
blowing air directly on the occupants.
10 A/C BUTTON
Press the A/C button to manually turn the A/C on or off.
When on, this system not only provides cooler air, but removes humidity from the air to help
avoid window fogging.
11 REAR A/C BUTTON
This button will allow the front controls to operate
the front or rear climate control systems.
To operate the rear climate control system from
the front, press the REAR button so that the light
illuminates and the “Rear Air-conditioning” screen
is displayed.
To adjust the front climate control system, press the REAR button again.
For more information, refer to the “Instrument and controls (section 2)” or the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
Rear Climate Controls
To activate the system:
1.Press the REAR button 01 on the front control panel until Rear Air-conditioning screen
is displayed.
• The indicator light will illuminate.
• The Fan Speed, Temperature, AUTO, and OFF buttons will now control the Rear
Air-conditioning system.
17
1591592_14b_Infiniti_QX80_QRG_093013.indd 17
9/30/13 9:36 AM
f i rst dr i v e f e a t u r e s
2.Press the REAR button 01 again, and the screen
will return to what was previously displayed.
• The indicator light will stay illuminated to
indicate that the Rear Air-conditioning system
is active.
01
OFF button 02 — Turns off the rear climate control
system, and REAR button indicator light.
Fan speed control buttons 03 — Press
to increase or decrease fan speed.
or
Temperature increase and decrease buttons 04 —
Adjusts the rear temperature up or down .
02 03 05
06
04
AUTO button 05 — System automatically works to keep air flow and fan speed at a
constant temperature.
MODE button 06 — Changes the air flow mode. The air flow modes are:
The air outlet is fixed at foot level.
The air outlet is fixed at the head and foot level.
The air outlet is fixed at the head level.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
01
05
06
02
03
04
FM/AM/SiriusXM* Satellite Radio With CD/DVD Player
01 VOLUME/ON•OFF CONTROL KNOB
Press the VOL/ON•OFF control knob to turn the system on or off. Turn the knob right
or left to increase or decrease the volume.
02 SEEK/CAT AND TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, press the
SEEK·CAT button or the TRACK
button.
For SiriusXM Satellite Radio, press the
SEEK·CAT button or the TRACK
to switch to the first channel of the previous or next category.
To change tracks on a CD, press the
SEEK·CAT button or the TRACK
button
button.
18
1591592_14b_Infiniti_QX80_QRG_093013.indd 18
9/30/13 9:36 AM
To rewind or fast forward a track on a CD, press and hold the
or the TRACK
button.
SEEK·CAT button
03 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eighteen for
SiriusXM Satellite Radio.
To store a station in a preset you must first select a radio band by pressing the
FM•AM 05 or XM 06 button, then tune to the desired FM, AM or SiriusXM Satellite
Radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
*SiriusXM Satellite Radio is only available on vehicles equipped with optional SiriusXM Satellite Radio subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 MPH (40 km/h).
04
03
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/OFF
switch 01 . The CRUISE indicator light in the
instrument panel will illuminate.
02
01
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET
switch 02 and release. Take your foot off the accelerator pedal. Your vehicle will maintain
the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02 . Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 04 .
To turn off cruise control, push the ON/OFF switch 01 . The CRUISE indicator light in the
instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
19
1591592_14b_Infiniti_QX80_QRG_093013.indd 19
9/30/13 9:36 AM
f i rst dr i v e f e a t u r e s
Intelligent Cruise Control (ICC) System (if so equipped)
The Intelligent Cruise Control (ICC) system
automatically maintains a selected distance from
the vehicle traveling in front of you according to that
vehicle’s speed (up to the set speed) or at the set
speed when the road ahead is clear.
03
01
This system may not function properly due to
road conditions when direct sunlight, rain, mud,
snow or other road spray cause the sensor to
become blocked.
04
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 01 for less than 1.5
seconds. The indicator light 02 will illuminate.
Accelerate to the desired speed.
02
05
Push down on the COAST/SET switch 03 and release it. Cruise control
will be set to the desired speed.
Press the distance button 04 repeatedly to change the set distance
between long, middle, and short.
06
When a vehicle is not detected ahead of you in the lane, the set distance and set vehicle
speed indicator lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane, the vehicle ahead detection, set
distance, and set vehicle speed indicator lights will illuminate 06 in set mode.
TO SET CONVENTIONAL FIXED SPEED CRUISE CONTROL MODE:
While cruise control is off, press the CRUISE ON/OFF button and hold it down for more than
1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
TO SWITCH BETWEEN THE TWO CRUISE CONTROL MODES:
When one of the two cruise modes is in use, you must turn the system off, and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
20
1591592_14b_Infiniti_QX80_QRG_093013.indd 20
9/30/13 9:36 AM
s y s t em guide
Trip Computer
When the
button 01 is pressed, the following
modes will appear on the vehicle information
display 02 :
01
03
• MPG – Displays the current and average fuel
consumption since the last reset.
• MPG/MPH – Displays the average fuel consumption
and speed since the last reset.
• TIME/MILES – Displays the elapsed time and
distance driven since the last reset.
02
• RANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
• OUTSIDE TEMP – Displays the temperature outside your vehicle.
• SETTING – Allows you to set reminders for alerts and maintenance intervals or change
the language and units used in the system.
— Press the
— Press the
button 03 to cycle through the various setting modes.
button 01 to choose the selected mode.
• W
ARNING – Displays when a warning is present.
button 03 for approximately 1 second to reset the currently displayed trip
Press the
odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the button to interrupt the voice prompts at
any time and speak a command after the tone.
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing HVAC vents away
from the ceiling.
Say commands after the tone, or press the
button to say a command at any time.
When speaking Phonebook names, please be aware
some phones require the last name to be spoken
before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
*Some jurisdictions prohibit the use of cellular telephones while driving.
21
1591592_14b_Infiniti_QX80_QRG_093013.indd 21
9/30/13 9:36 AM
syste m g ui d e
To cancel a voice recognition session, simply wait 5 seconds, say “Cancel” or “Quit”, or
press and hold the button for 5 seconds.
If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
For more detailed information and instructions, refer to your cellular phone Owner’s Manual
and visit www.InfinitiUSA.com/Bluetooth.
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1. Press the
button and select the “Connect Phone” key.
2. Initiate connecting from the phone.
• The connecting procedure varies according to
each cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
3. When the connecting is complete, the screen will
return to the Phone menu display.
PHONEBOOK SETUP
Depending on your cell phone, the system may
automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth® system.
If the phonebook does not download automatically,
40 entries can be individually downloaded.
To manually download entries:
1. Press the
2. Select the “Add New” key at the top of the display.
button and select the “Quick Dial” key.
There are different methods to input a phone number.
Select one of the following options:
“Copy from Call History” to save a number from the
Outgoing, Incoming or Missed Calls lists.
“Copy from the Phonebook” to save a number that has
been downloaded from your handset to the vehicle.
“Enter Number by Keypad” to input the number and name manually.
22
1591592_14b_Infiniti_QX80_QRG_093013.indd 22
9/30/13 9:36 AM
DIALING A CONTACT USING VOICE RECOGNITION
To make a call using voice recognition, follow
this procedure:
1. P
ress the button on the steering wheel.
After the tone, say “PHONE”
2. After the system confirms your command, wait for the
tone and say “Phonebook”.
3. The system will prompt you to speak a name. After the tone, say a name from your
phonebook. Be aware that for some phones it will be necessary to say the name in the last
name, first name format.
4. The system will give you a list of close matches. After the tone, select the correct match by
saying the number next to the correct match.
5. The system will confirm your selection. After the tone, say “Dial”.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the
“Hang up” key.
button or touch the
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
23
1591592_14b_Infiniti_QX80_QRG_093013.indd 23
9/30/13 9:36 AM
syste m g ui d e
02
05
01
03
04
06
09
10
07
08
Navigation System
01 Destination (DEST) - Press to enter a destination
02 INFINITI controller
•Slide or rotate to highlight an item on the screen and press ENTER to select the
highlighted item.
• On the map screen turn to adjust the map scale.
• To scroll the map, slide the INFINITI controller in the direction you want to scroll.
03 Information (INFO) - Press to display the vehicle, traffic (if so equipped), weather
(if so equipped) or voice recognition information.
04 SETTING - Press to access the system settings.
05 ROUTE - Press to access the guidance control functions such as guidance cancellation,
route priority, and waypoint settings on the route.
06 MAP - Press to display the map. While following a programmed route, press multiple times
to change the type of route information.
07 BACK - Press to return to the previous screen. In a settings screen, this button can also
be used to apply the setting. In a character input screen, this button can also delete the
characters that have been entered.
08 VOICE - Press to hear the current voice guidance for a programmed route.
09 STATUS - Press multiple times to display audio information, the air conditioner status,
fuel economy or navigation directions.
10 OFF - Press to switch between the day screen (bright) and the night screen (dark).
Press and hold the button to turn the display off. Press again to turn the display on.
For more information, please refer to your Navigation System Owner’s Manual.
24
1591592_14b_Infiniti_QX80_QRG_093013.indd 24
9/30/13 9:36 AM
HomeLink® Universal Transceiver
T he HomeLink system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage
doors, property gates, outdoor and indoor lights
or alarm systems.
HOMELINK
To program the HomeLink® Universal Transceiver:
•Position the handheld transceiver 1-3 in (26-76
mm) away from the HomeLink surface, keeping
the HomeLink indicator light in view.
•Press and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
•Both buttons may be released when the indicator light flashes rapidly.
T o verify the programing is complete, press and hold the HomeLink and observe the
indicator light:
•A solid continuous light indicates the programing is complete and the HomeLink button
will activate your device.
•A blinking light that turns to a solid continuous light after 2 seconds indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:
•At the receiver of the device that you are programing to the HomeLink, press and
release the “learn” or “smart” button (the name may vary by manufacturer but it is
usually located near where the hanging antenna wire is attached to the unit). You have
approximately 30 seconds to initiate the following step.
•Press and hold the programmed HomeLink button for 2 seconds and release.
ou may have to repeat the previous 2 steps up to 3 times to complete the programming
Y
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
25
1591592_14b_Infiniti_QX80_QRG_093013.indd 25
9/30/13 9:36 AM
Printing: October 2013 (07) / QR14E 0Z62U1 / Printed in USA
To view detailed instructional videos,
go to www.infinitiownersinfo.mobi/2014/qx80
or snap this barcode with an appropriate
barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the unique features
of your new vehicle. See your Owner’s Manual, which contains important safety warnings and
information about the operation and maintenance of your vehicle, for complete details. Nissan
North America, Inc. reserves the right to make changes, at any time, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discontinue models or equipment.
Due to continuous product development and other pre- and post-production factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with optional equipment. See
the actual vehicle for complete accuracy. Specifications, options and accessories may differ in
Hawaii, U.S. territories and other countries. For additional information on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America, Inc.
1591592_14b_Infiniti_QX80_QRG_093013.indd 2
9/30/13 9:34 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement