Catalogue Sheet: CS5000 Series

Catalogue Sheet: CS5000 Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install the Ready-Lite® CS5000 Series LED “SORTIE’’ Exit Signs. The equipment shall operate with
universal two-wire AC input voltage of 120VAC to 347VAC at less than 1.5W and universal two-wire DC input
voltage from 6VDC to 24VDC at less than 1.5W for single or double face signs.
The housing shall be constructed of rugged extruded aluminum and have a maximum depth of 2-1/2”. The
faceplate(s) shall be constructed of extruded aluminum and come standard with knockout chevrons.
The light source shall be light emitting diodes (LED). The LED lamps shall provide illumination in normal and emergency operation and shall be mounted inside the exit housing. The red
LED technology shall be ALINGAP. An LED-sensitive diffuser shall be mounted behind the legend
to provide the 6” high by 3/4” stroke letters with even illumination. The Exit Sign in a Self-powered
configuration shall stay illuminated during emergency operation for at least 60 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved.
The equipment shall be Ready-Lite® Model:
wall mount
460.0048-RL
end mount
460.0058-RL
ceiling mount
DIMENSIONS
Dimensions are approximate and subject to change.
7-3/4” [19.7 cm]
8-3/4” [22.3cm]
4-3/4” [11.9 cm]
6-3/8” [16.2 cm]
Extruded Aluminum
“Sortie” Sign
FEATURES
• Durable, extruded, one-piece aluminum
housing
• Long life ALINGAP technology LED light
source is completely enclosed in
acrylic module
• Single illumination module lights both
single and double face exit signs
• Highly energy efficient, consumes a
maximum of 3W
• Normal AC and emergency DC
operation – 120V to 347VAC;
6V to 24VDC input
• Also available with power pack; see
SM-CS5000 catalogue sheet
• CSA certified, meets or exceeds
CSA 22.2 No. 141 requirements
• Comes with Ready-Lite® EZ2 canopy, for
quick and easy installation
WIRE GUARDS
460.0057-RL
CS5000 SERIES
2-1/2” [6.3 cm]
18-3/4” [47.5 cm]
19-3/4” [50.1 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/ standard DC, red
120 to 347VAC
less than 1.5W
6 to 24VDC
less than 1.5W
AC/ special DC, red
120/277/347VAC
less than 1.5W
36 or 48 or 120VDC
less than 3W
self-powered, red
120 to 347VAC
less than 3W
nickel-cadmium battery
min. 60 or 120 minutes
ORDERING INFORMATION
SERIES
CS= aluminum
sortie
FACES/MOUNTING
5100= single face/universal mount
5200= double face/universal mount
COLOUR
VOLTAGE
WH= factory white
BK= black
TA= textured aluminum
PW= polar white
BA= brushed aluminum
-UL= 120/277/347VAC, 6 to 24VDC
-L120-2W= 120VAC, 120VDC 2 wires
-LU36= 120/277/347VAC - 36VDC
-LU48= 120/277/347VAC - 48VDC
-LU120= 120/277/347VAC - 120VDC
-ISP= self-powered, 120 to 347VAC
OPTIONS
TP= tamper-proof screws*
VRTP=vandal resistant shield with
tamper-proof screws*
G= green legend
*990.0119-RL= T
amper-proof bit (sold separately)
EXAMPLE: CS5100WH-UL
33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement