Wayne Dalton 7100 Torsion Rear Mount Low Headroom garage door Quick Start Guide

Below you will find brief information for garage door 7100 Torsion Rear Mount Low Headroom. This guide is designed to help you with the installation process and understanding of your new garage door. The guide is also available for download online.

PDF Download
Document
7100 Torsion Rear Mount Low Headroom Quick Start Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Torsion spring system
  • Rear mount
  • Low headroom
  • Easy installation
  • Detailed instructions

Frequently asked questions

The right and left hand of the door is always determined from inside the building looking out.

There are short struts and long struts. Short struts are typically installed along the top rail of the top section and/or along the bottom rail of the bottom section. Long struts are typically installed along the top and/or bottom rails of sections.

With horizontal tracks installed, you can now adjust the top fixtures by tightening the 1/4 - 20 flange hex nuts or 1/4 - 20 x 1-3/8 bolts and or 1/4 - 14 x 1 lag screws to secure the top fixture(s) to the top section.

For detailed information see supplemental instructions, “Removing an Existing Door/ Preparing the Opening”. These instructions are not supplied with the door, but are available at no charge from Wayne Dalton, A Division Of Overhead Door Corporation, P.O. Box 67, Mt. Hope, OH., 44660, or at www.Wayne-Dalton.com.

Please call 1-866-569-3799 (Press Option 1) and follow the prompts to contact the appropriate customer service agent. They will be happy to handle any questions that you may have.
ALP:
Preparing document for printing…
0%