Xemio-664 Quick Guide For information and support, www.lenco.com

Xemio-664 Quick Guide For information and support, www.lenco.com
Xemio-664
Quick Guide
For information and support, www.lenco.com
1
1. Controls and Connections
(1) M Button (Menu / Mode Function)
Button (Next / Forward Function)
(2)
(3)
Button (Previous / Backward Function)
(4)
Button (Play / Pause, Standby On / Off)
(5) VOL Button (Volume Control)
(6) USB Port (PC Connection / Charge)
(7) Main power switch On / Off
(8) Microphone (mono)
(9) Earphone Jack (3.5mm Stereo)
2. Charging the battery
• Make sure that the computer is turned on. Connect the
player to the computer by using the USB cable. Now
the computer will detect and install the driver
automatically. Once the installation is complete, the
player will be displayed in “My Computer” or for MAC
users on the desktop.
Note: For Windows 98/98SE the driver needs to be
installed first.
• Once connected to a computer the player will charge
automatically (computer needs to be turned on). After 2
hours the battery is fully charged. At same time, the
player is ready for media files upload / download with
your computer.
3. Downloading the User’s Manual
• For consider environment protection, the detailed
User’s Manual is stored on the player’s flash memory in
a folder named “Utilities > User Manual”. To open it you
need to download it onto your computer, and then you
can view it on computer directly.
Note: To open the user manual the computer needs to
2
have a .pdf reader. You can download a .pdf reader for free
via http://get.adobe.com/reader/
This symbol indicates that the relevant
electrical product or battery should not be
disposed of as general household waste in
Europe. To ensure the correct waste treatment
of the product and battery, please dispose
them in accordance to any applicable local laws of
requirement for disposal of electrical equipment or
batteries. In so doing, you will help to conserve natural
resources and improve standards of environmental
protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
Products with the CE marking comply with the
EMC Directive (2004/108/EC) and the Low
Voltage Directive (2006/95/EC) issued by the
Commission of the European Community.
The declaration of conformity may be consulted at
http://www.lenco.eu/supportfiles/CE/fhfsd84jnw0362.pdf
®All rights reserved
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising