D1 Series Top Guided Single Seated Control Valves Model D1S Overview

D1 Series Top Guided Single Seated Control Valves Model D1S Overview
No. SS2-D1S100-0100
D1 Series
Top Guided Single Seated Control Valves
Model D1S
Overview
Model D1S globe control valves are with bolted bonnet and
top guided contoured trims. The design facilitates easy access
to internal components, online inspection and maintenance.
Model D1S are provided with multiple spring diaphragms
actuators.
Model D1S are applicable to reliable shut-off and flow control
performance.
Specifications
Body
Type
Straight-through, cast globe valve
Nominal size:
Pressure rating


End connection
1/2, 3/4, 1, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10, 12 inches
ANSI Class 150, 300, 600
PN 25, 50, 100
Flanged end: FF, RF, RJ, LG, SG, Tongue
and groove

Welding end: BW
Carbon steel: ASTM A216 Gr WCB, WCC,
WC6, WC9, C5, C12, LCB
Stainless steel: ASTM A351 Gr CF8, CF8M,
CF3, CF3M, CF8C
Alloy steel: Hastelloy C, Alloy 20, Nickel,
Titanium, Monel (For other materials,
consult your Azbil sales office.)
Stainless steel spiral wound with graphite
filled

Stainless steel spiral wound with PTFE
filled
Trim
Valve plug
Seat type
Single seated, Contoured-type plug
-Metal seat: Equal percentage, Linear
-Soft seat: Equal percentage, Linear
Single seated, Quick opening-type plug
-Metal (Stellite) seat
Bonnet

V shaped PTFE (150 to 200°C)

Graphite (150 to 600°C)

Low fugitive emission (With PTFE and
graphite packing on request)
Inverted V shaped PTFE (For vacuum application)
Gasket
Material
Gland packing

Plain type (0 to 230°C)

Extended plain type (-70 to 0°C)

Extended finned type (230 to 600°C)
Note) Take care not to exceed the operating temperature ranges specified for respective materials.
Gland type
Metal seat, Soft seat
Material
Bolted gland
1
 Stainless steel: ASTM A479 Type SS316, SS304,
SS316L, SS304L, SS904L
 Alloy steel: Hastelloy C, Alloy 20, Nickel, Titanium, Monel (For other materials, consult your
Azbil sales office.)
3rd edition
No. SS2-D1S100-0100
Azbil Corporation
Actuator
Type
Action
Linearity
Single acting diaphragm actuator (Model M)
Direct or reverse action
Diaphragm
Nitrile rubber with nylon insert
1.4 to 3.2 kg/cm2
Air connection
Ambient temperature
Weight
Contact your Azbil sales office
Actuator orientation
Refer to Figure 2
Finish
-40 to 80°C
Blue (Munsell 10B5/10) or silver, or other speciied colors.
Valve action
Air-to-close (Direct action actuator is combined.)
Air-to-open (Reverse action actuator is combined.)
Optional accessories
Positioner (pneumatic, smart type), pressure regulator with
filter, hand wheel, limit switch, motion transmitter, booster
relay, lock-up valve, and others.
Note) For the optional items, refer to the specification sheets
and installation drawings of respective accessories.
Additional specification (by special order)

Special inspection
Flow characteristics inspection, material inspection
(Material certificate), nondestructive inspection
Stainless steel (SUS304) Atmosphere-exposed nuts
and bolts

Special air piping and joint

Vacuum service
Performance
Rated Cv value
Refer to Table 1
Flow characteristics
Inherent rangeability
Allowable differential pressure
Leakage specification
Equal percentage, linear, quick opening
30:1
Optional 50:1
Without positioner: Within ±5% F.S.
With positioner: Within ±1% F.S.
Refer to Figure 1, Table 2 and Table 3
1/4”, 3/8”, 1/2” NPT internal thread
Without positioner: Within 5% F.S.
With positioner: Within 1% F.S.
Dimensions
Supply air pressure
Hysteresis error
Contact your Azbil sales office
IEC60534-4 or ANSI/FCI 70-2
Metal seat: Class IV
Metal (Stellite) seat: Class V
Soft seat: Class VI
2
No. SS2-D1S100-0100
Azbil Corporation
Cv value and flow characteristics
Table 1. Cv Value
Nominal size
inch
mm
1/2, 3/4
and 1
15, 20
and 25
1-1/2
40
2
50
2-1/2
65
3
80
4
100
6
150
8
200
10
250
12
300
Port size
inch
mm
1/8
3
3/16
5
1/4
6
5/16
8
3/8
10
1/2
15
3/4
20
1
25
1-1/2
40
1-1/4
32
1
25
2
50
1-1/2
40
1-1/4
32
2-1/2
65
2
50
1-1/2
40
3
80
2-1/2
65
2
50
4
100
3
80
2-1/2
65
6
150
5
125
4
100
8
200
6
150
5
125
10
250
8
200
6
150
12
300
10
250
8
200
Cv value
1
1.5
2
3
4
5
9
13
30
20
13
50
30
20
80
50
30
110
80
50
200
110
80
400
300
200
640
400
300
*
*
*
*
*
*
* Contact your Azbil sales office.
a. For diaphragm actuator
b. For diaphragm actuator with
top hand wheel
c. For diaphragm actuator with
side hand wheel
Figure1 Face-to-face and external dimensions
3
No. SS2-D1S100-0100
Azbil Corporation
Table 2. Face-to-face dimensions
[Unit: mm]
F/F
Nominal
Class
Class
Class
size
150RF
300RF
600RF
(inches)
(PN 20) (PN 50) (PN 100)
1/2
184
190
203
3/4
184
194
206
1
184
197
210
1-1/2
222
235
251
2
254
267
286
2-1/2
276
292
311
3
298
318
337
4
352
368
394
6
451
473
508
8
543
568
610
10
673
708
752
12
737
775
819
Table 3. External dimension
[Unit: mm]
H
Nominal
Without With top With side
Actuator
size
Pressure rating
φD
hand
hand
hand
Model No.
(inches)
wheel
wheel
wheel
Class 150
475
715
760
1/2, 3/4
M-00
Class 300
475
715
760
240
Class 600
485
730
780
Class 150
475
715
760
1
M-01
Class 300
475
715
760
240
Class 600
500
750
800
Class 150
525
750
830
1-1/2
M-11
Class 300
525
750
830
380
Class 600
545
770
855
Class 150
540
760
840
2
M-11
Class 300
540
760
840
380
Class 600
565
795
875
Class 150
675
1040
1070
2-1/2
M-11
Class 300
675
1040
1070
448
Class 600
690
1075
1095
Class 150
675
1040
1070
3
M-22
Class 300
675
1040
1070
448
Class 600
690
1075
1095
Class 150
675
1040
1070
4
M-22
Class 300
675
1040
1070
448
Class 600
705
1085
1080
Class 150
875
1230
1310
6
M-33
Class 300
895
1270
1350
448
Class 600
910
1300
1375
Class 150
950
1320
1370
8
M-34
Class 300
990
1360
1420
600
Class 600
1010
1380
1450
Class 150
*
*
*
Class 300
10
*
*
*
*
*
Class 600
*
*
*
Class 150
*
*
*
Class 300
12
*
*
*
*
*
Class 600
*
*
*
*Contact your Azbil sales office.
4
No. SS2-D1S100-0100
Azbil Corporation
Actuator orientation
Diaphragm actuator
Flow
direction
Positioner
Side-mounted
hand wheel
Side-mounted
hand wheel
Flow
direction
No.1 (Standard type)
Positioner
Flow
direction
Side-mounted
hand wheel
Positioner
Flow
direction
Flow
direction
Side-mounted
hand wheel
Positioner
Flow
direction
Flow
direction
No.2
Positioner
Side-mounted
hand wheel
Positioner
Flow
direction
No.3
No.4
Note) Indicate by position number when installation other than the standard type is required.
Figure2 Actuator orientation
Ordering information
When ordering, please specify;
1)
2)
3)
4)
5)
6)
7)
8)
9)
10) Special requirement of degreasing, free from
copper and etc.
11) Name of flow medium
12) Normal flow and maximum required flow
13) Pressure of flow medium upstream and downstream pressure at maximum and minimum,
required flow
14) Temperature and specific gravity of flow medium
15) Viscosity of flow medium, inclusive or exclusive
of slurry
Model Number: D1S
Nominal size × Port size
Type and rating of end connections
Body and trim material, necessity of hardening
Type of bonnet
Valve and plug characteristics
Type of actuator, air to diaphragm
Valve action (direct or reverse)
Accessories (positioner, hand wheel, pressure
regulator etc.)
5
No. SS2-D1S100-0100
Azbil Corporation
6
No. SS2-D1S100-0100
Azbil Corporation
7
No. SS2-D1S100-0100
Azbil Corporation
Please, read ‘Terms and Conditions’ from following URL before
the order and use.
http://www.azbil.com/products/bi/order.html
Specifications are subject to change without notice.
Sold by:
Manufactured and Sold by:
1-12-2 Kawana, Fujisawa
Kanagawa 251-8522 Japan
URL: http://www.azbil.com/
P.O.Box 68683
Dammam 2nd Industrial City, Dammam 31537
Kingdom of Saudi Arabia
8
(2)
1st edition: Aug. 2014
3rd edition: Aug. 2015
No part of this publication may be reproduced or duplicated
without the prior written permission of Azbil Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement