CLUX-8M 1x8 HDMI 1.3 with Multi-channel Splitter

CLUX-8M 1x8 HDMI 1.3 with Multi-channel Splitter
CLUX-8M
1x8 HDMI 1.3 with
Multi-channel
Splitter
Operation Manual
CLUX-8M
TABLE OF CONTENTS
1. Introduction................................................................................ 1
2. Features...................................................................................... 1
3. Operation Controls and Functions.......................................... 2
3.1 Front Panel........................................................................... 2
3.2 Rear Panel............................................................................ 3
4. Connection and Installation..................................................... 4
5. Specifications............................................................................ 4
1. Introduction
The HDMI v1.3 Distribution Amplifier Series is the most advanced solution to
HDMI signal distribution. Each product in this series is compatible to HDMI v1.3
specifications, a cutting edge technology which defines the support to
transfer Deep Color (10-bit and 12-bit) video and new lossless compressed
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with
a high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing,
the HDMI v1.3 DA series also does signal amplification and equalization, so as
to provide high performance I/O of audio and video.
2. Features

HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.

Deep color video up to 12bit, [email protected](24/60)Hz.

One HDMI source to connect up to eight HDMI displays simultaneously.

HDCP keysets allows each output to work independently when
connecting to a HDMI display.

Splits a HDMI source up to eight outputs without signal loss.

Supports DVI source and DVI display by using HDMI to/from DVI
adaptor cable.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz Fs sample rate).
●

Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.

HDMI cable distance test with 1080p/8bits resolution the, Input/Output
source can run up to 15/15 meters. If 1080p/12bits the Input/Output
source can run up to 10/15 meters.

Can selected EDID source from TV or this splitter.

Support CEC bypass.

Support xvYCC.
1
3. Operation Controls and Functions
3.1 Front Panel
CLUX-8M
HDMI v1.3 SPLITTER
HDMI OUT
HDMI OUT
7
8
2
3
SYNC
HDMI IN
1
1
1
2
3
4
5
HDMI OUT
POWER
DC 5V
4 5
HDMI Outputs 1/7/8: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs play
identical video signal simultaneously.
Sync LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
HDMI Input: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
Power LED Indicator: The LED will illuminate when the power is
connected.
Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
2
3.2 Rear Panel
EDID
STD
TV
1
1
2
3
HDMI OUT
HDMI OUT
HDMI OUT
HDMI OUT
HDMI OUT
2
3
4
5
6
2
SYS.Reset
ON
OFF
3
EDID Control switch: Default factory setting is TV, leave as is if the display
is properly. Switch to STD to use build-in EDID if the display has problems.
When the EDID control switch in TV selection, the unit will detect the first
HDMI output source’s EDID and record in the unit. If the first detected
output source is DVI it will pass to next source, until the first HDMI been
detected
Note: EDID Control switch will be valid when re-power on the unit.
HDMI Outputs 2~6: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs play
identical video signal simultaneously.
System Reset: Switch to “ON” stage, the system will send the internal
CEC Command to the display within 8~10 minutes to force all the
displays switch to HDMI 1 port. Meanwhile, the source CEC Command
will not functional to the system. When switch to “OFF” stage, the system
reset function will terminate.
3
4. Connection and Installation
DVD or Set-Top-Box
HDMI
HDMI Cable
HDMI
HDMI
HDMI Cable
HDMI
OR
HDTV
OR
HDMI display
LCD TV
5. Specifications
Frequency bandwidth
Input port
Output ports
Power Supply
Dimensions (mm)
Weight(g)
Chassis Material
Silk Skin Color
Operating Temperature
2.25Gbps (single link)
1x HDMI female port (Type A connector)
8x HDMI female ports (signal link)
5VDC/5A (US/EU standards, CE/FCC/UL certified)
240(W) x 103(D) x 24(H)
1000
Metal
Black
Operating from 0°C ~ 40°C
4
5
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20080801 MPM-CLUX8M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement