SHO-ME
®
MODEL NO.11.4000SF
LED Visor Light
GENERAL INFORMATION:
The LED Visor Light features two switches, Power - ON/OFF, and Mode to select the flash pattern (Map light is optional on Red Visor Lights.) When selecting a flash pattern, hold mode button until flashing stops, then release button for next flash pattern. When the power is turned off then back on, the LED Visor Light will resume the exact flash pattern as before power was interrupted.
The LED Visor Light has seven flash patterns to choose from:
1. Double Alternating Flash
2. Quad Alternating Flash
3. Quint Alternating Flash
4. Mega Alternating Flash
5. Double Simultaneous Flash
6. Quad Simultaneous Flash
7. Automatic Random Select
INSTALLATION INSTRUCTIONS:
Select the visor you wish to use for mounting your new Visor Light. With visor in the down position mount Visor Light with attached Velcro straps. (Visor Light should be facing the front glass.) Route cord in a manner so it will not interfere with airbag deployment. Plug into lighter or accessory outlet.
NOTE: To avoid light being blocked by tinted strip at top of windshield mount Visor Light at the bottom of visor, if desired.
HOUSING
90.6834
2 3
LEXAN
8
" X 7 7
90.6514
8
"
MODE SWITCH
90.3472
ON/OFF SWITCH
90.3471
CIRCUIT BOARD
90.3897
RED/AMBER LED
90.3930
STRAIGHT CORD 10 FT
43.0182
5 AMP FUSE
76.0005
#90 PLUG
90.3271
SCREWS
90.4315
BOTTOM HOUSING
90.6835
20" VELCRO STRAP
15.0422
PRODUCTS COMPANY
804 East Hwy 248 Cassville, MO 65625
U.S. and Canada Toll Free Numbers Phone: 800-641-4098 FAX: 800-526-1240
E-mail: [email protected] WEB: www.able2products.com
5-15-08