null  null
siemens.com/sitop
SITOP Power Supply
Technical data, April 2014
Answers for industry.
Page 7
Page 8
Page 9
Page 10, 1-phase
Page 11, 3-phase
Page 12, 1- and 2-phase
Page 13, 3-phase
SITOP lite
SITOP compact
LOGO!Power
SIMATIC Design
SITOP smart
SITOP modular
The cost-effective
basic power supply
The slim power supply unit
for control boxes
The flat power supply
for distribution boards
The optimal supply for
SIMATIC S7 and more
The powerful standard
power supply
The technology power supply
for demanding solutions
Page 6
Three good reasons for a
SITOP power supply
A reliable power supply is the basis for all production and for all plants, so it’s only
SITOP – Top in reliability
logical that you would be extra careful when selecting the best fitting power
SITOP stands for a high-quality DC power supply. The
power supply units even protect against faults such as
mains fluctuations. But there are also external conditions
that require specific measures. That’s why expansion
components that work perfectly together also protect
against mains problems and problems on the DC side,
thus improving the reliability of the entire plant.
supply. Three factors of special importance: reliability, efficiency, and integration.
2
Pages 14 –17
Pages 18 – 21
Special design
Expansion modules
Equipped for special functions
and conditions
Expansion modules
for boosting system availability
SITOP – Top in efficiency
SITOP – Top in integration
With energy costs rising, efficiency is an increasingly
important competitive argument. And that’s where SITOP
power supplies make a valuable contribution. Power loss is
low over the entire load range, including in no-load operation. Because a power supply is rarely operated at full load,
this provides excellent opportunities for savings.
The more fully a power supply is integrated into its
environment, the higher its productivity. That’s why SITOP
is optimally matched to automation systems such as
SIMATIC, SINUMERIK, and SIMOTION. In addition, SITOP
helps to further advance system integration – with an
uninterruptible power supply that is fully integrable into
TIA. This makes engineering in the TIA portal convenient
and provides S7 function modules for integration into
STEP 7 user programs and preassembled WinCC faceplates
for operation and monitoring.
Pages 22 –29
DC UPS, uninterruptible
DC power supply
Reliable 24 volt – even during power failures
3
Selection table
SITOP power supplies
Input voltage
Output voltage 24 V DC
1-phase 120 V AC,
230 V AC
Output
current
SITOP lite
0.6 A
6EP1331-5BA00
1.3 A
2 A
2.5 A
3 A
SITOP compact
6EP1332-1LB00
LOGO!Power
6EP1331-5BA10
6EP1331-1SH03
6EP1332-5BA00
6EP1332-1SH43
SITOP smart
6EP1332-2BA20
3.5 A
5 A
6EP1333-1LB00
6EP1332-5BA10
6EP1332-1SH52
6EP1333-2BA20
6.2 A
8 A
10 A
6EP1334-1LB00
12.5 A
20 A
6EP1334-2BA20
6EP1331-1LD00
6EP1332-4BA00
6EP1332-1LD00
6EP1332-1SH71
6ES7307-1EA01-0AA0 6EP1333-3BA00
6ES7307-1EA80-0AA0
6ES7307-1KA02-0AA0 6EP1334-3BA00
6EP1336-2BA10
6EP1336-3BA00
6EP1333-7CA00
6EP1334-7CA00
6EP1334-1AL12
6EP1334-1LD00
6EP1337-3BA00
6ES7148-4PC00-0HA0
6EP1333-3BA001)
6EP1436-2BA10
6EP1436-3BA10
6EP1437-2BA20
6EP1437-3BA10
Connection to 2 phases 230 – 500 V AC – see data sheet SITOP modular 1-/2-phase
6EP1333-1AL12
6EP1336-3BA10
20 A
40 A
6EP1332-1LD10
6EP1333-1LD00
6EP1333-4BA00
6EP1434-2BA10
30 A
4
6EP1332-2BA00
10 A
17A
1)
6EP1232-1AA00
6EP1334-2AA01-0AB0
5 A
8 A
“Special design,
special use”
6ES7307-1BA01-0AA0
40 A
3-phase 400 – 500 V AC
SITOP modular
6EP1332-1SH31
3.7 A
4 A
SIMATIC Design
6EP1334-3BA001)
6EP1436-3BA00
6EP1433-1AL12
6EP1433-2CA00
6EP1436-3BA20
6EP1437-3BA20
6EP1437-3BA00
Grey: more information in the Industry Mall
Input voltage
Output voltage 24 V DC
24 – 110 V DC
110 – 300 V DC
Output current
2 A
SITOP compact
0.6 A
6EP1331-5BA00
2.5 A
4 A
6EP1332-5BA00
6EP1332-5BA10
1.3 A
88 – 350 V DC
20 A
600 V DC
20 A
6EP1331-5BA10
LOGO!Power
SITOP smart
SIMATIC Design
SITOP modular
“Special design
special use”
6ES7305-1BA80-0AA0
6EP1331-1SH03
6EP1333-1SH43
6EP1332-1SH52
6EP1336-3BA10
6EP1536-3AA00
Grey: more information in the Industry Mall
Input voltage
Output
SITOP compact
LOGO!Power
SITOP smart
SITOP modular
Output voltage 5, 12, 15, 48, … V DC
1-phase 120 V AC, 230 V
AC
5 V/3 A
6EP1311-1SH03
5 V/6.3 A
12 V/1.9 A
12 V/2.0 A
12 V/3.0 A
6EP1311-1SH13
6EP1321-5BA00
12 V/4.5 A
12 V/6.5 A
12 V/7 A
6EP1321-1SH03
15 V/1.9 A
15 V/4 A
3 – 52 V/2 – 10 A
24 V DC
3-phase 400 – 500 V AC
6EP1321-1LD00
6EP1322-1SH03
6EP1322-5BA10
6EP1322-2BA00
12 V/8.3 A
12 V/14 A
6EP1351-1SH03
6EP1352-1SH03
6EP1322-1LD00
6EP1323-2BA00
6EP1353-2BA00
2 x 15 V/3.5 A
6EP1353-0AA00
12 V/2.5 A
6EP1621-2BA00
12 V/20 A
48 V/10 A
48 V/20 A
“Special design
special use”
6EP1424-3BA00
6EP1456-3BA00
6EP1457-3BA00
5
SITOP lite
Cost-effective basic power supply
Technical data
SITOP lite
Output voltage / current, type
Order No.
24 V / 2.5 A, PSU100L
6EP1332-1LB00
24 V / 5 A, PSU100L
6EP1333-1LB00
24 V / 10 A, PSU100L
6EP1334-1LB00
Rated line frequency
50/60 Hz
50/60 Hz
50/60 Hz
Rated input voltage
–– Range
Mains buffering
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature circuit
breaker
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Derating
Efficiency at rated values, approx.
Parallel switching
Electronic short-circuit protection
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
120 / 230 V AC
93...132 /187...264 V AC
> 20 ms (at 93/187 V)
1.1/ 0.65 A
< 27 A
3 A Characteristic C
2.1 / 1.15 A
< 32 A
6 A Characteristic C
120 / 230 V AC
93...132 /187...264 V AC
> 20 ms (at 93/187 V)
4.3 / 2.4 A
< 65 A
10 A Characteristic C
24 V DC
± 3 %
22.8...26.4 V DC
2.5 A
from +45 °C (1.5 %/K)
85 %
24 V DC
± 3 %
22.8...26.4 V DC
5 A
from +45 °C (1.5 %/K)
86 %
24 V DC
± 3 %
22.8...26.4 V DC
10 A
from +45 °C (2 %/K)
89 %
Yes, constant current
Yes, constant current
Yes, constant current
Yes
Class A
Yes
Class A
Yes
Class A
Not applicable
Yes
No
IP20
IP20
IP20
32.5 x 125 x 125
50 x 125 x 125
70 x 125 x 125
0… +60 °C
0.4 kg
CE, cULus, CB
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
6
120 / 230 V AC
93...132 /187...264 V AC
> 20 ms (at 93/187 V)
0… +60 °C
0.5 kg
CE, cULus, CB
0… +60 °C
0.75 kg
CE, cULus, CB
SITOP compact
Slim power supply for control boxes
Technical data
Overall width 22.5 mm
Output voltage / current, type
24 V/0.6 A, PSU100C
24 V/1.3 A, PSU100C
12 V/2 A, PSU100C
24 V/2.5 A, PSU100C
24 V/4 A, PSU100C
Order No.
6EP1331-5BA00
6EP1331-5BA10
6EP1321-5BA00
6EP1332-5BA00
6EP1332-5BA10
24 V/3.7 A,
PSU100C NEC Class 2
6EP1332-5BA20
0.28 – 0.18 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
–
0.6 A
from +55 °C (3 %/K)
82 %
0.63 – 0.31 A
10 A characteristic C
16 A characteristic B
24 V D
±3%
22.2...26.4 V
1.3 A
from +55 °C (3 %/K)
86 %
0.63 – 0.31 A
10 A characteristic C
16 A characteristic B
12 V DC
±3%
10.5...12.9 V DC
2 A
from +55 °C (3 %/K)
82 %
1.33 – 0.67 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
22.2...26.4 V DC
2.5 A
from +50 °C (3.5 %/K)
87 %
2.25– 1.15 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
22.2...26.4 V DC
4 A
from +50 °C (3.5 %/K)
88 %
1.21 – 0.67 A
10 A characteristic C
16 A characteristic B
24 V DC
±3%
–
3.7 A
from +50 °C (3.5 %/K)
87 %
Rated input voltage
–– Range
Rated line frequency
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms
(at 120/230 V AC)
50/60 Hz
No-load loss
< 0.75 W
Mains buffering
Rated input current
–– Recommended miniature
circuit breaker
Rated output voltag
–– Tolerance
–– Setting range
Rated output current
–– Derating
Efficiency at rated values, approx.
Parallel switching
No
Electronic short-circuit protection Yes, restart
Overall width 30 mm
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms
(at 120/230 V AC)
50/60 Hz
< 0.75 W
Yes 2)
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms
(at 120/230 V AC)
50/60 Hz
< 0.75 W
Yes 2)
Overall width 45 mm
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms
(at 120/230 V AC)
50/60 Hz
< 0.75 W
Yes 2)
Overall width 52.5 mm
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms
(at 120/230 V AC)
50/60 Hz
< 0.75 W
Yes 2)
100 – 230 V AC
85...264 V AC
110…300 V DC
> 20 ms
(at 120/230 V AC)
50/60 Hz
< 0.75 W
No
12 V/6.5 A, PSU100C
6EP1322-5BA10
100 – 230 V AC
85...264 V AC/
110…300 V DC
> 20 ms
(at 120/230 V AC)
50/60 Hz
1.6 – 0.75 A
10 A characteristic C
16 A characteristic B
12 V DC
±3%
10.5…12.9 V DC
6.5 A
from +50 °C (3.5 %/K)
86 %
< 0.75 W
Yes 2)
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Not applicable
Not applicable
Not applicable
Not applicable
Yes
Yes
Yes
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Class B
IP20
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions (WxHxD) in mm
22.5 x 80 x 100
30 x 80 x 100
30 x 80 x 100
45 x 80 x 100
52.5 x 80 x 100
52.5 x 80 x 100
52.5 x 80 x 100
Ambient temperature
Weight approx.
Connections 1)
Certification
–20...+70 °C
0.12 kg
Removable screw
terminal
CE, cULus, cCSAus, CB,
ATEX, cCSAus Class I
Div 2, GL, ABS
Class B
–20...+70 °C
0.17 kg
Removable screw
terminal
CE, cULus, cCSAus, CB,
ATEX, cCSAus Class I
Div 2, GL, ABS
Class B
–20...+70 °C
0.17 kg
Removable screw
terminal
CE, cULus, cCSAus, CB,
ATEX, cCSAus Class I
Div 2, GL, ABS
Accessory: removable spring-type terminal, order no. 6EP1971-5BA00
The maximum starting current is limited to the rated output current of one power supply
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
Class B
–20...+70 °C
0.22 kg
Removable screw
terminal
CE, cULus, cCSAus, CB,
ATEX, cCSAus Class I
Div 2, GL, ABS
Class B
–20...+70 °C
0.32 kg
Removable screw
terminal
CE, cULus, cCSAus, CB,
ATEX, cCSAus Class I
Div 2, GL, ABS
Class B
–20...+70 °C
0.32 kg
Removable screw
terminal
CE, cULus, CB, NEC
class 2, cCSAus Class I
Div 2, GL, ABS
Class B
–20...+70 °C
0.32 kg
Removable screw
terminal
CE, cULus, cCSAus, CB,
ATEX, cCSAus Class I
Div 2, GL, ABS
1)
2)
7
LOGO!Power
Flat power supply for distribution boards
New! In LOGO! 8 design 1)
Technical data
Output voltage / current
Order No.
Rated input voltage
–– Range
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Output current – rated value
–– Derating
100 – 240 V AC
85...264 V AC/
110...300 V DC
> 40 ms (at 187 V)
Parallel switching
Yes
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
15 V/1.9 A
6EP1351-1SH03
0.36 – 0.22 A
0.53 – 0.30 A 0.63 – 0.33 A
< 26 A
< 25 A < 25 A
10 A characteristic C resp. 16 A characteristic B
Efficiency at rated values, approx.
Electronic short-circuit protection
12 V/1.9 A
6EP1321-1SH03
50/60 Hz
5 V DC
±3%
4.6...5.4 V DC
3.0 A
from +55 °C
(2 %/K)
77 %
No-load loss
8
54 mm design
5 V/3 A
6EP1311-1SH03
< 1.5 W
72 mm design
24 V/1.3 A
6EP1331-1SH03
0.70 – 0.35 A
< 25 A
5 V/6.3 A
6EP1311-1SH13
100 – 240 V A
85...264 V AC/
110...300 V DC
> 40 ms (at 187 V)
< 1.8 W
15 V DC
< 2 W
50/60 Hz
24 V DC
< 2 W
Yes, constant current
15 V/4 A
6EP1352-1SH03
0.71 – 0.37 A
1.13 – 0.61 A
1.24 – 0.68 A < 50 A
< 55 A
< 55 A 10 A characteristic C resp. 16 A characteristic B
5 V DC
±3%
10.5...16.1 V DC 10.5...16.1 V DC 22.2...26.4 V DC 4.6...5.4 V DC
6.3 A
1.3 A
1.9 A
1.9 from +55 °C
from +55 °C
from +55 °C
from +55 °C
(2 %/K)
(2 %/K)
(2 %/K)
(2 %/K
80 %
80 %
85 %
83 %
12 V DC
12 V/4.5 A
6EP1322-1SH03
< 1.5 W
Yes
90 mm design
24 V/2.5 A
6EP1332-1SH43
1.22 – 0.66 A
< 46 A
12 V DC
15 V DC
24 V DC
10.5...16.1 V DC
4.5 A
from +55 °C
(2 %/K)
85 %
10.5...16.1 V DC
4.0 A
from +55 °C
(2 %/K)
85 %
22.2...26.4 V DC
2.5 A
from +55 °C
(2 %/K)
88 %
< 1.9 W
< 2.3 W
< 1.8 W
Yes, constant current
Class B
24 V/4 A
6EP1332-1SH52
100 – 240 V AC
85…264 V AC/
110...300 V DC
> 40 ms (at 187 V)
50/60 Hz
1.95 – 0.97 A
< 30 A
10 A char. C
resp. 16 A char. B
24 V DC
±3%
22.2...26.4 V DC
4.0 A
from +55 °C
(2 %/K)
89 %
< 2 W
Yes
Yes, constant current
Class B
Class B
Not applicable
Not applicable
Yes
IP20
IP20
IP20
54 x 90 x 55
72 x 90 x 55
90 x 90 x 55
–20… +70 °C
0.17 kg
CE, cULus, CB,
FM, ATEX,
cCSAus Class I
Div 2, GL, ABS
–20… +70 °C
CE, cULus, CB,
FM, ATEX,
cCSAus Class I
Div 2, GL, ABS
CE, cULus, CB,
FM, ATEX,
cCSAus Class I
Div 2, GL, ABS
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
1)
Shipment after the existing products have been sold (est. June 2014)
CE, cULus, CB,
FM, ATEX, SEMI
F47, NEC Class
2, cCSAus Class
I Div 2, GL, ABS,
DNV, BV, LRS
0.25 kg
CE, cULus, CB,
FM, ATEX,
cCSAus Class I
Div 2, GL, ABS
–20… +70 °C
CE, cULus,CB,
FM, ATEX,
cCSAus Class I
Div 2, GL, ABS
CE, cULus, CB,
FM, ATEX,
cCSAus Class I
Div 2, GL, ABS
CE, cULus, CB,
FM, ATEX, SEMI
F47, NEC Class2,
cCSAus Class I
Div 2, GL, ABS,
DNV, BV, LRS
0.34 kg
CE, cULus, CB, FM,
ATEX, SEMI F47,
cCSAus Class I Div 2,
GL, ABS, DNV, BV,
LRS
SITOP
in SIMATIC design
Technical data
Output voltage / curr., type
SIMATIC S7-1200 design
24 V/2.5 A, PM1207
SIMATIC S7-300 design
24 V/2 A, PS307
24 V/5 A, PS307
SIMATIC S7-1500 design
24 V/10 A, PS307
24 V/3 A, PM1507
24 V/8 A, PM1507
SIMATIC ET200 pro PS
24 V/8 A
Order No.
6EP1332-1SH71
6ES7307-1BA01-0AA0
6ES7307-1EA01-0AA0
6ES7307-1KA02-0AA0
6EP1332-4BA00
6EP1333-4BA00
6ES7 148-4PC00-0HA0
Rated input voltage
120/230 V AC
automatic range selection
120/230 V AC
automatic range selection
120/230 V AC
automatic range selection
120/230 V AC
automatic range selection
120/230 V AC
automatic range selection
120/230 V AC
automatic range selection
400 – 480 V 3 AC
340…550 V 3 AC
––Range
85…132 /176…264 V AC
85…132 /170…264 V AC
85…132 /170…264 V AC
85…132 /170...264 V AC
85…132 /176...264 V AC
85…132 /176...264 V AC
Mains buffering
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
3 ms (at 400 V)
Rated line frequency
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
Rated input current
1.2/0.67 A
0.9/0.5 A
2.3/1.2 A
4.2/1.9 A
1.4 A/0.8 A
3.7 A/1.7 A
1 A
––Inrush current (25 °C)
< 13 A
< 22 A
< 20 A
< 55 A
< 23 A
< 67 A
< 40 A
––Recommended miniature
circuit breaker
16 A charakt. B,
10 A charakt. C
3 A charakt. C
6 A charakt. C
10 A charakt. C
from 6 A charakt. C,
from 10 A charakt. B
from 10 A charakt. C,
from 16 A charakt. B
3RV2021-4NA10
Rated output voltage
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
––Tolerance
± 3 %
± 3 %
± 3 %
± 3 %
± 3 %
± 3 %
– 5 %/+3 %
––Setting range
––On/off switch
–
No
–
Yes
–
Yes
–
Yes
–
Yes
–
Yes
–
No
Rated output current
2.5 A
2 A
5 A
10 A
3 A
8 A
8 A
–O
verload characteristics
(extra power for 5 s/min)
–
–
–
–
4.5 A
12 A
–
Efficiency at rated values,
approx.
83 %
84 %
86 %
90 %
87 %
91 %
88 %
Parallel switching
Yes
Yes
Yes
Yes
Yes
Yes
No
Electr. short-circuit protection
Yes, constant current char.
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Yes, restart
Radio interference
suppression (EN 55022)
Class B
Class B
Class B
Class B
Class B
Class B
EN 61000-6-4 (Class A)
Supply harmonics limitation
(EN 61000-3-2)
Not applicable
Not applicable
Yes
Yes
Not applicable
Yes
No
Degree of protection (EN 60529)
IP20
IP20
IP20
IP20
IP20
IP20
IP67, UL: encl. type 5 indoor
Ambient temperature
0…+60 °C
0…+60 °C
0…+60 °C
0…+60 °C
0…+60 °C
0…+60 °C
–25°C...+55°C
Installation
DIN rail or
wall mounting
Can be mounted on S7 rail. Mounting adapter for DIN rail 35 x15 mm:
6EP1971-1BA00
on S7-1500 system carrier
on S7-1500 system carrier
Screw mounting, e.g., on
SIMATIC ET 200pro system rail
Mass (B x H x T) in mm
70 x 100 x 75
40 x 125 x 120
60 x 125 x 120
80 x 125 x 120
50 x 147 x 135
75 x 147 x 135
310 x 135,5 w/o connector
x 90 0.6 kg
0.8 kg
0.45 kg
0.74 kg
Weight approx.
0.3 kg
0.4 kg
Certification
CE, cULus, CB, FM, ATEX,
cCSAus Class I Div 2, GL,
ABS, DNV
CE, cULus, ATEX, cULus Class I Div 2, GL, ABS, DNV
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
CE, cULus, CB, FM, ATEX, BV, cULus Class l Div 2, pending: GL, ABS
2.8 kg
CE,
pending: ULus 508
9
SITOP smart
Powerful standard power supply
Technical data
Output voltage/current, type
Order No.
Rated input voltage
–– Rate
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Permanently up to +45 °C
–– Overload behavior
(extra power for 5 s/min)
–– Derating
Efficiency at rated values,
approx.
Parallel switching
Electronic short-circuit
protection
Radio interference
suppression (EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection
(EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
SITOP smart 1-phase
24 V/2.5 A, PSU100S
24 V/5 A, PSU100S
6EP1 332-2BA20
6EP1 333-2BA20
120/230 V AC
120/230 V AC
85...132/170...264 V AC, automatic range switching
> 20 ms (at 93/187 V)
> 20 ms (at 93/187 V)
50/60 Hz
50/60 Hz
2.34 A/1.36 A
1.25 A/0.74 A
< 40 A
< 33
from 6 A,
from 3 A,
characteristic C
characteristic C
24 V DC
24 V DC
±3%
±3%
22.8...28 V DC
22.8...28 V DC
5 A
2.5 A
6A
3A
7.5 A
3.75 A
24 V/10 A, PSU100S
6EP1 334-2BA20
120/230 V AC
12 V/14 A, PSU100S
6EP1 323-2BA00
120/230 V AC
> 20 ms (at 93/187 V)
50/60 Hz
1.73 A/ 0.99 A
< 45 A
from 6 A,
characteristic C
12 V DC
±3%
11.5…15.5 V DC
7 A
7A
10.5 A
> 20 ms (at 93/187 V)
50/60 Hz
4.49 A/1.91 A
< 60 A
from 10 A,
characteristic C
24 V DC
±3%
22.8...28 V DC
10 A
12 A
15 A
> 20 ms (at 93/187 V)
50/60 Hz
3.24 A/1.41 A
< 60 A
from 10 A,
characteristic C
12 V DC
±3%
11.5…15.5 V DC
14 A
14 A
21 A
24 V/20 A, PSU100S
6EP1336-2BA10
120/230 V AC
85...132/176...264 V AC
> 20 ms (at 120/230 V)
50/60 Hz
7.5/3.5 A
< 11 A
from 10 A,
characteristic C
24 V DC
±3%
22.8...28 V DC
20 A
24 A
30 A
from +60 °C (3%/ K)
85 %
from +60 °C (3%/ K)
88 %
from +55 °C (5%/ K)
84 %
from +60 °C (3%/ K)
90 %
from +55 °C (5%/ K)
87 %
from +60 °C (5 %/K)
90 %
Yes
Yes, constant current
Yes
Yes
Yes
Yes
Yes
Yes, restart
Class B
Class B
Class B
Class B
Class B
Class B
Not applicable
Yes
Yes
Yes
Yes
Yes
IP20
IP20
IP20
IP20
IP20
IP 20
–10…+70 °C
32.5 x 125 x 125
0.32 kg
CE, cULus, CB, ATEX,
cCSAus Class I Div 2, GL, BV
–10…+70 °C
50 x 125 x 125
0.5 kg
CE, cULus, CB, ATEX,
cCSAus Class I Div 2, GL, BV
–10…+70 °C
50 x 125 x 125
0.5 kg
CE, cULus, CB, ATEX,
cCSAus Class l Div 2, GL
–10…+70 °C
70 x 125 x 125
0.8 kg
CE, cULus, ATEX, cCSAus
Class l Div 2, GL, BV
–10…+70 °C
70 x 125 x 125
0.8 kg
CE, cULus, CB, ATEX,
cCSAus Class l Div 2, GL
0...+70 °C
115 x 145 x 150
2.4 kg
CE, cULus, CB, ATEX,
cCSAus Class I Div 2, GL
Specifications at rated input voltage and ambient temperature at +25 °C (unless otherwise specified)
10
12 V/7A, PSU100S
6EP1 322-2BA00
120/230 V AC
Technical data
Output voltage / current, type
Order No.
Rated input voltage
–– Range
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Overload characteristics
–– Permanently up to +45 °C
–– Overload behavior
(extra power for 5 s/min)
–– Derating
Efficiency at rated values, approx.
Parallel switching
Electronic short-circuit protection
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection
(EN 60529)
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
SITOP smart 3-phase
24 V/10 A, PSU300S
6EP1434-2BA10
400 – 500 V 3 AC
340…550 V 3 AC
> 6 ms (at 400 V)
50/60 Hz
0.7 – 0.5 A
< 36 A
From 6 – 16 A charact. C 3-ph. coupled or
3 RV2011-1DA10 or 3 RV2711-1DD10
24 V DC
±3%
24...28 V DC
10 A
12 A
15 A
24 V/20 A, PSU300S
6EP1436-2BA10
400 – 500 V 3 AC
340…550 V 3 AC
> 6 ms (at 400 V)
50/60 Hz
1.2 – 1.0 A
< 36 A
From 6 – 16 A charact. C 3-ph. coupled or
3 RV2011-1DA10 or 3 RV2711-1DD10
24 V DC
±3%
24...28 V DC
20 A
24 A
30 A
24 V/40 A, PSU300S
6EP1437-2BA20
400 – 500 V 3 AC
340…550 V 3 AC
> 6 ms (at 400 V)
50/60 Hz
2,0 – 1,5 A
< 60 A
From 10 – 16 A charact. C 3-ph. coupled or
3 RV2011-1DA10 or 3 RV2711-1DD10
24 V DC
±3%
24...28 V DC
40 A
48 A
60 A
–
91 %
Yes
Yes, restart
Class B
from +60 °C (5 %/K)
91 %
Yes
Yes, restart
Class B
from +60 °C (2.5 %/K)
91.5 %
Yes
Yes, restart
Class B
Yes
Yes
Yes
IP20
IP20
IP20
0...+70 °C
90 x 145 x 150
1.6 kg
CE, cULus, CB, ATEX, cCSAus Class I Div 2, GL
0...+70 °C
90 x 145 x 150
1.6 kg
CE, cULus, CB, ATEX, cCSAus Class I Div 2, GL
0...+70 °C
150 x 145 x 150
3.7 kg
CE, cULus, CB, ATEX, cCSAus Class I Div 2, GL
Specifications at rated input voltage and ambient temperature at +25 °C (unless otherwise specified)
11
SITOP modular
Technology power supply for demanding solutions
Technical data
SITOP modular 1-phase and 2-phase1)
Output voltage / current, type
Order No.
24 V/5 A, PSU200M
6EP1333-3BA002)
120 – 230/230 – 500 V AC
85…264/176…550 V AC
120 – 230/230 – 500 V AC
85…264/176…550 V AC
120 – 230 V AC
85…275 V AC or 88…350 V DC
Mains buffering
> 25 ms (at 120/230 V)
> 25 ms (at 120/230 V)
> 25 ms (at 120/230 V)
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature
circuit breaker
2.2 – 1.2/1.2 – 0.61 A
< 35 A
6 A charact. C
or 3RV2011-1xA10
4.4 – 2.4/2.4 – 1.1 A
< 35 A
6 A charact. C
or 3RV2011-1xA10
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Overload behavior
(power boost for 25 ms)
–– Overload behavior
(extra power for 5 s/min)
–– Derating
24 V DC
±3%
24…28.8 V DC
5 A
15 A
24 V DC
±3%
24…28.8 V DC
10 A
30 A
Rated input voltage
–– Range
Rated line frequency
50/60 Hz
–
Efficiency at rated values, approx. 87 %
24 V/10 A, PSU200M
6EP1334-3BA002)
24 V/20 A, PSU400M
6EP1536-3AA00
24 V/40 A, PSU100M
6EP1337-3BA00
4.6 – 2.5 A
< 20 A
10 A charact. C
or 3RV1021-1xA10
0.85 A
<8A
15.0/8.0 A
< 125 A
20 A Charakt. C
or 3RV2011-xxA10
24 V DC
±3%
24…28.8 V DC
20 A
60 A
24 V DC
± 3 %
24…28.8 V DC
20 A
24 V DC
±3%
24…28.8 V DC
40 A
120 A
30 A
30 A
from +60 °C (2-3,5 %/K)
from +60 °C (3 %/K)
87 %
93 %
from +60 °C (5.5 %/K),
200…300 V DC, 820…900 V DC
95 %
50/60 Hz
24 V/20 A, PSU100M
6EP1336-3BA10
50/60 Hz
600 V DC
200...900 V DC,
start-up from approx. 400 V
50/60 Hz
from +60 °C (2,5%/K)
88 %
Parallel switching
Yes, output characteristic can be switched to parallel operation
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Class B
Class B
Class B
Class A (emission)
Class B
Yes
Yes
Yes
No
No
Electronic short-circuit protection Yes, constant current or latching shutdown selectable. Constant current: approx. 1.15 x rated output current
Ambient temperature
Dimensions (WxHxD) in mm
Weight approx.
Certification
1)
12
120/230 V AC
85...132/176...264 V AC, start-up
from 95/190 V
> 20 ms (at 230 V)
IP20
IP20
–25…+70 ° C
IP20
–25…+70 ° C
70 x 125 x 125
–25…+70 °C
90 x 125 x 125
1.2 kg
90 x 125 x 125
1.4 kg
CE, cULus, ATEX, UL Class I Div 2, SEMI F47 2), GL, ABS
Connection to two phases of a three-phase supply system
2)
At input voltage 208 to 230 VAC
3)
1.5 kg
IP 20
–25…+70 ° C
90 x 125 x 125
1.2 kg
CE, cULus, ATEX, UL Class I Div 2, CE, cULus, CB, GL
GL, ABS
In conjunction with two buffer modules
IP20
0…+70 ° C
240 x 125 x 125
2.9 kg
CE, cULus, ATEX, cCSAus Class I
Div 2, SEMI F473)
SITOP modular 3-phase
SITOP modular 3-phase, 48 V
24 V/20 A, PSU300M
24 V/40 A, PSU300M
48 V/10 A, PSU300M
48 V/20 A, PSU300M
400 – 500 V 3 AC
320…575 V 3 AC
> 15 ms (at 400 V)
400 – 500 V 3 AC
320…575 V 3 AC
> 15 ms (at 400 V)
400 – 500 V 3 AC
320…575 V 3 AC
> 15 ms (at 400 V)
400 – 500 V 3 AC
320...550 V 3 AC, start-up from 340 V
> 6 ms (at 400 V)
6EP1436-3BA10
6EP1437-3BA10
6EP1456-3BA00
6EP1457-3BA00
50/60 Hz
1.2 – 1.0 A
< 18 A
6 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
2.6 – 2.1 A
< 56 A
10 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
1.2 – 1.0 A
< 18 A
6 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
50/60 Hz
2.2 A (with 400 V)
< 70 A
10 – 16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
24 V DC
± 3 %
24...28.8 V DC
24 V DC
± 3 %
24...28.8 V DC
48 V DC
± 3 %
42…56 V DC
48 V DC
± 3 %
42…56 V DC
20 A
60 A
40 A
120 A
10 A
23A
20 A
60A
30 A
60 A
15 A
from +60 °C (3 %/K)
from +60 °C (3.8 %/K)
from +60 °C (3 %/K)
93 %
93 %
93 %
Yes, output characteristic can be switched to parallel operation
Yes, constant current or latching shutdown selectable. Constant current: approx. 1.15 x rated output current
90 %
Yes
Yes
Class B
Class B
Class B
Class B
IP20
IP20
IP 20
IP20
–25…+70 °C
70 x 125 x 125
1.2 kg
CE, cULus, CB, ATEX, cCSAus Class I Div 2,
SEMI F47, GL, ABS
Yes
–25…+70 °C
150 x 125 x 150
3.4 kg
CE; cULus, CB, ATEX, cCSAus Class I Div 2, SEMI
F47, GL, ABS
Yes
–10...+70 °C
70 x 125 x 125
1.2 kg
CE; cULus, CB, ATEX, cCSAus Class I Div 2, GL, ABS
0…+60 °C
240 x 125 x 125
3.2 kg
CE, UL, CSA, GL, ABS
Specifications at rated input voltage and ambient temperature at +25 °C (unless otherwise specified)
13
SITOP
in special design, for special uses
Technical data
PSU100D direct wall mounting
Output voltage / current
12 V/3 A
24 V/2.1 A
Rated input voltage
100 – 240 V AC
100 – 240 V AC
Order No.
–– Range
Mains buffering
Rated line frequency
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Output current – rated value
–– Derating
Efficiency at rated values,
approx.
Parallel switching
Electronic short-circuit
protection
Radio interference suppression
(EN 55022
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Ambient temperature
Installation
Dimensions (WxHxD) in mm
Weight approx.
Certification
6EP1321–1LD00
85...264 V AC
> 15 ms (at 115/230 V)
50/60 Hz
0.75 – 0.5 A
< 60 A
10 A characteristic C, 16 A characteristic B
6EP1332–1LD00
85...264 V AC
85...264 V AC
> 15 ms (at 115/230 V)
50/60 Hz
1.1 – 0.7 A
< 60 A
100 – 240 V AC
> 15 ms (at 115/230 V)
50/60 Hz
1.5 – 1.0 A
< 60 A
12 V DC
12 V DC
12 V DC
11…14 V DC
22...28 V DC
22...28 V DC
+/- 2 %
3A
from +50 °C (2.5 %/K)
84 %
+/- 2 %
2.1 A
from +50 °C (2.5 %/K)
86 %
+/- 2 %
3.1 A
from +50 °C (2.5 %/K)
86 %
Yes
Yes
Yes
Class B
Class B
Class B
Not applicable
Not applicable
Yes
IP20
IP20
IP20
97 x 98 x 38
97 x 128 x 38
97 x 128 x 38
CE, cULu, cURus
CE, cULus, cURus
CE, cULus, cURus
Yes, restart
–10 °C ...+70 °C
Wall mounting, variable installation position
0.37 kg
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
14
24 V/3.1 A
6EP1331–1LD00
Yes, restart
–10°C...+70°C
0.35 kg
Yes, restart
–10°C...+70°C
0.37 kg
Technical data
PSU100D direct wall mounting
Output voltage / current
24 V/4.1 A
12 V/8.3 A
24 V/6.2 A
24 V/12.5 A
Rated input voltage
100 – 240 V AC
100 – 240 V AC
100 – 240 V AC
100 – 240 V AC
Order No.
–– Range
6EP1332-1LD10
85...264 V AC
6EP1322-1LD00
85...264 V AC
Mains buffering
> 15 ms (at 115/230 V)
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature circuit
breaker
Rated output voltage
2.0 – 1.1 A
2.0 – 1.1 A
< 75 A
< 75 A
10 A charakteristic C, 16 A charakteristic B
Rated line frequency
–– Tolerance
–– Setting range
Output current – rated value
–– Derating
Efficiency at rated values,
approx.
Parallel switching
Electronic short-circuit
protection
Radio interference suppression
(EN 55022
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Ambient temperature
Installation
Dimensions (WxHxD) in mm
Weight approx.
Certification
50/60 Hz
> 15 ms (at 115/230 V)
50/60 Hz
6EP1333-1LD00
85...264 V AC
> 15 ms (at 115/230 V)
50/60 Hz
3.1 – 2.0 A
< 75 A
6EP1334-1LD00
85...264 V AC
> 15 ms (at 115/230 V)
50/60 Hz
4.0 – 2.0 A
< 60 A
24 V DC
12 V DC
24 V DC
24 V DC
22...28 V DC
11…14 V DC
22...28 V DC
22...28 V DC
+/- 2 %
+/- 2 %
+/- 2 %
4.1 A
from +50 °C (2.5 %/K)
86 %
8.3 A
from +50 °C (2.5 %/K)
84 %
Yes
Yes
Yes
Yes
Class B
Class B
Class B
Class B
Yes
Yes
No
Yes
IP20
IP20
IP20
IP20
Yes, restart
–10°C...+70°C
Yes, restart
–10°C...+70°C
Wall mounting, variable installation position
6.2 A
from +50 °C (2.5 %/K)
86 %
+/- 2 %
Yes, restart
–10°C...+70°C
12.5 A
from +50 °C (2.5 %/K)
86 %
Yes, restart
–10°C...+70°C
97 x 158 x 38
97 x 158 x 38
97 x 178 x 38
105 x 199 x 41
CE, cULus, cURus
CE, cULus, cURus
CE, cULus, cURus
CE, cULus, cURus
0.50 kg
0.57 kg
0.55 kg
0.81 kg
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
15
SITOP
in special design, for special uses
new!
Technical data
Output voltage / current
Order No.
Rated input voltage
SITOP flat design
24 V/5 A
6EP1333-1AL12
120/230 V AC
24 V/10 A
6EP1334-1AL12
120/230 V AC
–– Range
85...132/170...264 V AC
85...132/170...264 V AC
Rated line frequency
50/60 Hz
50/60 Hz
Mains buffering
Rated input current
–– Inrush current (25 °C)
–– Recommended miniature circuit
breaker
Rated output voltage
–– Tolerance
> 20 ms (at 93/187 V)
2.2/1.2 A
< 32 A
6 A charact. C
24 V DC
± 1 %
> 20 ms (at 93/187 V)
4/2.5 A
< 65 A
SITOP PSU300E
24 V/5 A
6EP1433-1AL12
6EP1333-7CA00
24 V/8 A
6EP1334-7CA00
400 – 480 V 3 AC
> 50 ms (at 400 V)
> 40 ms (at I A rated)
> 40 ms (at I A rated)
3 ms (at 400 V)
2,25 A/ 1,24 A
< 15 A
3,5 A/ 1,52 A
< 15 A
1A
< 40 A
3 AC 320…480 V
50/60 Hz
0.36 A
< 15 A
6 – 10 A charact. C
24 V DC
24 V DC
± 3%
AC 85… 132 V/ 170… 264 V
50/60 Hz
≥ 6 A charact. C/B
24 V DC
± 3%
50/60 Hz
≥ 6 A charact. C/B
24 V DC
± 3%
22...29 V DC
22...29 V DC
22...29 V DC
–
Status signaling
No
No
LED green for „DC ok“ and flashing red for „overload/
short circuit.” Signaling contact for „DC ok“
5 A
–
88 %
10 A
–
89 %
5A
–
90 %
Parallel switching
Yes
Yes
LED green for “DC ok”.
Signaling contact
for “DC ok”
No
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Class B
Class B
Class A
Electronic short-circuit protection
Yes, restart
Yes, restart
6EP1433-2CA00
AC 120/230 V (automatic range switching)
–– Setting range
Output current – rated value
–– Derating
Efficiency at rated values, approx.
SITOP PSU300P in IP67
24 V/8 A
3 AC 400 V
10 A charact. C
± 1 %
SITOP PSU100P
24 V/5 A
Yes, restart
5A
–
90 %
–
8A
–
93 %
340…550 V 3 AC
50/60 Hz
3RV2011-1DA10
24 V DC
–5 %/+3 %
–
8 A
–
88 %
Yes, 2 units
Yes, 2 units
LED green for „DC ok“.
Signaling contact for
„DC ok“ and „overheating“
No
Class B
Class B
EN 61000-6-4 (Class A)
Yes, restart
Yes, restart
Yes, restart
No
No
Yes
Yes
Yes
No
IP20
IP20
IP20
Ambient temperature
0...+60 °C
0...+60 °C
0…+60 °C
IP67, UL: enclosure
type 4 indoor
-25...+60°C
IP67, UL: enclosure
type 4 indoor
-25...+60°C
IP67, UL: enclosure
type 5 indoor
–25 °C...+55 °C
Dimensions (WxHxD) in mm
160 x 130 x 60
160 x 130 x 60
42 x 125 x 125
120 x 181 (w/o connector) x 60,5
Weight approx.
0.6 kg
0.72 kg
0.6 kg
1,1 kg
Installation
Certification
DIN rail
CE, cULus
DIN rail
CE, cULus
16 Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
DIN rail
CE, cULus
Screw mounting
CE, cULus
Screw mounting
1,1 kg
CE, cULus
Screw mounting, e.g., on
SIMATIC ET 200pro system rail
310 x 135,5
(w/o connector) x 90
2.8 kg
CE, pending: ULus508
Technical data
Output voltage / current
Order No.
SITOP PSU300B for battery charging
12 V/20 A
24 V/17 A
24 V/30 A
SITOP DC/DC
SITOP dual
SITOP flexi
12 V/2.5 A
2 x 15 V/3.5 A
3…52 V/10 A
6EP1424-3BA00
6EP1436-3BA20
6EP1437-3BA20
6EP1621-2BA00
6EP1353-0AA00
6EP1353-2BA00
320…575 V 3 AC
320…575 V 3 AC
320…575 V 3 AC
18.5...30.2 V DC
93...264 V AC
85…132 V/170...264 V AC
50/60 Hz
50/60 Hz
Rated input voltage
400 – 500 V 3 AC
Mains buffering
> 15 ms (at 400 V)
> 15 ms (at 400 V)
> 20 ms (at 400 V)
> 5 ms
> 10/40 ms (at 120/187 V)
Rated input current
–– Inrush current (25 °C)
0.7 – 0.6 A
< 18 A
1.2 – 1.0 A
< 18 A
1.6 – 1.3 A
< 56 A
1.6 A
< 20 A with 20 ms
1.6/1.0 A
< 30 A, < 3 ms
–– Range
Rated line frequency
–– Recommended miniature
circuit breaker
Rated output voltage
–– Tolerance
–– Setting range
Rated output current
–– Derating
Efficiency at rated values, approx.
50/60 Hz
6 –16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
12 V DC
± 3 %
12…14 V DC
20 A
–
88 %
400-500 V 3 AC
50/60 Hz
6-16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
24 V DC
± 3 %
24...28.8 V DC
17 A
ab +60 °C (1,7 %/K)
93 %
400 – 500 V 3 AC
50/60 Hz
10 –16 A charact. C 3-ph.
coupled or 3RV2011-1DA10
or 3RV2711-1DD10
24 V DC
± 3 %
24...28.8 V DC
30 A
from +60 °C (1.7%/K)
93 %
24 V DC
–
120 – 230 V AC
10 A characteristic B
10 A characteristic C,
16 A characteristic B
12 V DC
2 x 15 V DC
± 3 %
12…14 V DC
2.5 A
–
80 %
± 3 %
14.5…17 V DC
2 x 3.5 A
from +45 °C (2 %/K)
80 %
120 – 230 V AC
> 10 ms (at 93/187 V)
2.2/0.9 A
< 32 A
24 V DC
± 1 %
3…52 V DC
2 – 10 A (max. 120 W)
–
84 % (bei 24 V/5 A)
Parallel switching
Yes
Yes
Yes
Yes, 2 units
Yes
Yes
Radio interference suppression
(EN 55022)
Supply harmonics limitation
(EN 61000-3-2)
Degree of protection (EN 60529)
Class B
Class B
Class B
Class B
Class A
Class B
Yes
Yes
Yes
Yes
No
Yes
Electronic short-circuit protection Yes, constant current or latching shutdown selectable
Ambient temperature
Installation
Dimensions (WxHxD) in mm
Weight approx.
Certification
IP 20
–25 °C...+70 °C
DIN rail
70 x 125 x 125
1.2 kg
CE, cULus
IP20
–25…+70 °C
DIN rail
70 x 125 x 125
1.2 kg
CE, GL (cULus pending)
IP 20
–25 °C...+70 °C
DIN rail
150 x 125 x 150
3.4 kg
CE, cULus
Yes, constant current
IP20
0…+60 °C
DIN rail
32.5 x 125 x 125
0.26 kg
CE, cULus
Yes, restart
IP20
0 ...+60 °C
DIN rail
75 x 125 x 125
0.75 kg
CE
Yes, constant current
IP20
0…+60 °C
DIN rail
75 x 125 x 125
0.9 kg
CE, cULus
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
17
Configuration with
redundancy module
Power supply Redundancy
system
module
Your benefits with the
redundancy module:
Power supply
system
24 V DC
SITOP add-on modules
for increasing availability
A reliable power supply system is the basis for any production process or plant.
So it is only makes sense to not only carefully select the power supply unit, but
protect the 24-V supply against faults in the input or output circuit. SITOP offers
•Highly secure 24-V supply thanks
to a redundant design
•Reliable supply even when one
power supply fails
•Compact redundancy modules
for power supply units up to 40 A
•24 V/NEC class2 redundancy
module limited to 100 VA
•Diagnostics signals via LEDs and
signaling contacts
•Adjustable switching threshold
for LEDs and signaling contacts
Redundancy modules for security against failure of power supply units
SITOP redundancy modules provide additional protection against failures
of the 24-V supply. Because the two power supplies are decoupled via a
redundancy module, one failed power supply unit has no effect on the
24-V supply. The redundancy module continually monitors the feeding
power supply units and when one unit fails, the other unit automatically
takes over the feed, thereby safeguarding the 24-V supply. In addition, a
signal is sent via a signaling contact that can be evaluated by a controller,
PC, or control system.
suitable add-on modules for this purpose.
Redundancy modules
Redundant design of the
power supply syste
18
Your benefits with the selectivity module:
Configuration with selectivity module
Power supply
Selectivity
module
PLC
HMI Actuators
24 V DC
Sensors
•Protection against overloads and short
circuits in the 24-V circuit
•Safe tripping of circuit breakers
regardless of line lengths or
cross-sections
•Four load feeders per module
•Variants with an adjustable output
current variable from 0.5 to 3 A or from
3 to 10 A
•Possibility of sequential startup of
feeders to reduce inrush current
•Diagnosis via a common signaling
contact or single-channel signal
•Evaluation via free SIMATIC S7 or
SIMOTION function block for modules
with single-channel signaling
Your benefits with the
buffer module:
Configuration with
buffer module
SITOP smart and
modular power
supply
Buffer module
•Inexpensive protection
against power failure up
to max. 10 seconds
•Support of power supply
unit for temporarily
increased power
requirements
•High load current up
to 40 A
24 V DC
Selectivity modules to monitor 24-V feeders
Buffer module bridges brief power failures
In today’s plants, all 24-V loads receive power from one shared, regulated, switched-mode
power supply. To prevent faults in one load from disabling the entire plant, the 24-V supply
circuit is divided into individual feeders and, in the case of a fault, selectively disconnected.
The selectivity module monitors the current for each feeder and reliably prevents supply
voltage failure, thus avoiding total failure of the plant. Thanks to channel-specific signaling and
evaluation by means of SIMATIC S7 and SIMOTION function blocks, fault detection is extremely
fast and downtimes are reduced.
Power failures usually last only for fractions of a second –
however, they can cause time- and cost-intensive damage to
sensitive production areas. Used in combination with SITOP
smart and modular power supply units, the buffer module
bridges short-duration voltage dips with its electrolytic
capacitors and reliably preserves interruption-free operation.
Selectivity modules
Buffer module
Electronic monitoring
of 24-V feeders
Bridging for up to
a period of seconds
19
SITOP expansion modules
to increase system availability
Technical data
Signaling
SITOP
Signaling module1)
SITOP PSE202U redundancy module
Rated input voltage
–– Range
Brief description of product/
function
Contact rating
240 V AC/6 A
Signaling module for snapping onto the
side of the basic unit SITOP modular;
(6EP1x3x-3BA00, 6EP1457-3BA00); automatic contacting, with floating signaling
contacts for “Output voltage o.k.” and
“Operating readiness o.k.”; with signal
input for switching the basic unit ON/OFF
remotely.
24 V DC
24 V DC
19…29 V DC
19…29 V DC
Module for redundancy mode. Floating relay contact and green LED for signaling
“Infeed 1 and 2 o.k.“, switching threshold adjustable between 20 to 25 V DC.
Decoupling and limitation of the output
Decoupling of two 24-V power supplies
to Class 2 limit (100 V A) of two 24-V
up to 5 A or one 10 A power supply per
power supplies 5 to 40 A.
redundancy module.
24 V DC
24…28.8 V DC
Rated output current
–– Setting range
Not applicable
10 A (total output current)
40 A (total output current)
Order No.
6EP1961-3BA10
Efficiency at rated values, approx. Not applicable
Redundancy
6EP1964-2BA00
97 %
3.5 A2)
95 %
6EP1961-3BA21
Decoupling of two 24-V power supplies
5 A to 20 A or one 40 A power supply per
redundancy module.
97 %
Parallel switching
Not applicable
No
No
No
Radio interference suppression
(EN 55022)
Degree of protection (EN 60529)
Class B
Class B
Class B
Class B
IP20
IP20
IP20
IP20
Dimensions (WxHxD) in mm
25 x 125 x 125
30 x 80 x 100
30 x 80 x 100
70 x 125 x 125
Electronic short-circuit protection Not applicable
Ambient temperature
Weight approx.
Certification
0…+ 60 °C
0.15 kg
CE, UL, CSA
No
–20…+70 °C
0.125 kg
CE, cULus
Can only be combined with SITOP modular 6EP1_3_-3BA00 and 6EP1457-3BA00 power supply
Max. 8 A summation current in fault case in accordance with NEC Class 2
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
1)
2)
20
6EP1962-2BA00
No
–20…+70 °C
0.125 kg
CE, cULus, NEC Class 2
No
0…+60 °C
0.5 kg
CE, cULus, cCSAus Class I Div 2, ATEX,
GL, ABS
Technical data
SITOP
Order No.
Monitoring
SITOP PSE200U selectivity module
with common signaling contact
6EP1961-2BA11
6EP1961-2BA21
Mains buffering
Selektivitätsmodul SITOP PSE200U
with single channel signalin
6EP1961-2BA31
6EP1961-2BA41
SITOP select
diagnosis module
6EP1961-2BA00
Buffer module1)
SITOP PSE201U
6EP1961-3BA01
40 A
Rated input voltage
–– Range
Brief description of product/
function
24 V DC
22…30 V DC
Module for distributing the 24 V supply over up to four load circuits and their monitoring for overload;
selective shutdown of faulty load circuits, rated current individually adjustable;
universal use for all power supplies.
Individual load circuits can be switched on sequentially. Individual load circuits can be switched on sequentially.
Status indication via 3-color LED per channel;
Status indication via 3-color LED per channel;
remote reset with 24 V signal and reset via pushbutton
remote reset with 24 V signal and reset via pushbutton
per channel; single channel signaling for channelper channel; common signaling contact.
specific analysis via SIMATIC S7 or SIMOTION function
block.
24 V DC
24…28.8 V DC
Buffer module for mains
buffering; parallel connection at output of 24-V
SITOP modular and SITOP
Status indication via
smart power supplies;
2-color LED per channel;
common reset via pushbut- buffering time 200 ms at
ton, plug-in fuse per chan- 40 A to 1.6 s at 5 A load
current; multiplication
nel; status indication via
possible through parallel
3-color LED per channel;
common signaling contact. connection; maximum
buffering time 10 s.
Rated output current
4 x 3 A
4 x 10 A
–– Setting range
0.5…3 A
Efficiency at rated values, approx. 97 %
Parallel switching
No
Radio interference suppression
(EN 55022)
Degree of protection (EN 60529)
Class B
4 x 10 A
3…10 A
4x3A
0.5…3 A
4 x 10 A
3…10 A
Dimensions (WxHxD) in mm
Weight approx.
Certification
Yes
IP20
IP20
0…+60 °C
72 x 80 x 72
CE, UL, cURus, CB, cCSAus Class I Div 2, ATEX, GL, ABS
97 %
Class B
0…+60 °C
0.2 kg
2…10 A
No
Electronic short-circuit protection Yes
Ambient temperature
24 V DC
22…30 V DC
72 x 90 x 90
CE, UL, cURus, cCSAus Class I Div 2, ATEX, GL, ABS
0.4 kg
CE, UL, cURus, cCSAus
Class I Div 2, ATEX
Not applicable
Yes
Yes
Class B
IP20
0…+60 °C
70 x 125 x 125
1.2 kg
CE, UL, CSA, ATEX,
UL Class I Div 2, GL, ABS
1)
Can only be combined with SITOP modular power supply 24 V DC
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
21
SITOP-Module zur 24V-Pufferung
Energy buffers
24-V buffering
Storage medium
Life (also temperature-dependent)
Functional range (temperature, degree of protection, ventilation)
UPS module/electronics
Max. rated output current
Buffer module
UPS500
UPS1600
DC-USV
Max. 10 s
Electrolytic
capacitors
Minutes
Double-layer
capacitors
Hours
Hours
Gel cell batteries
Gel cell batteries
++
++
+
•
•
•
40 A
15 A
20 A
40 A
I/O, serial, USB
I/O, USB,
Ethernet/PROFINET
I/O, serial, USB
++
+
++
Overload capacity
Interfaces
Operating and diagnostic information via
– Signaling contacts
– OPC server
– Web server
+
•
•
– S7 function modules, WinCC faceplates
Downloading of multiple PCs/PLCs
Start from battery without supply voltage (island operation)
Engineering via
– Software-tool (PC)
– TIA portal
SITOP ensures reliable 24-V
supply – even when the power fails
Power outages can bring a plant to a standstill, with high costs in terms
of both time and money. The SITOP DC UPS provides perfect protection
against unexpected downtimes and so guarantees uninterrupted plant
operation. SITOP add-on modules provide buffering solutions that range
from seconds to hours.
22
•
++
+
•
in preparation
•
•
•
•
•
•
SITOP Selection Tool for fast and easy selection
The SITOP Selection tool offers detailed selection assistance based on
criteria such as buffering time, load current, peak current, and switch-on
threshold. The DC UPS can also be selected and compared with just a few
clicks of the mouse, just as easily as the power supply. You can export
your selection directly to the Siemens Industry Mall. All required CAD data,
circuit diagram macros, and other product information for simple, quick
configuration can be called up in the CAx download manager.
•
•
•
Your benefits with the SITOP UPS500:
Your benefits with the SITOP UPS1600:
•Bridging for up to a period of minutes,
depending on the load current and DC
UPS design
•Totally maintenance-free double-layer
capacitors
•Short charging times
•Long life even at high ambient
temperatures
•No ventilation needed for
the installation location
•IP65 variant for use outside
the control cabinet
•Simple PC integration using
a software tool
•USB port for PC communication
•Bridging for up to a period of hours, depending on
power requirements
•Automatic detection of the UPS1100 battery modules
by UPS1600
•Smart battery management for monitoring operational
readiness, rechargeable battery feeder, aging, and
charging status
•Temperature-controlled charging characteristic
•Communication via USB or Ethernet/PROFINET
•Integrated Web server
•Full integration in TIA: convenient engineering in
the TIA portal, function blocks for S7 user programs,
and WinCC faceplates
•SITOP UPS Manager supports configuration and
monitoring of PC-based systems
SITOP UPS500 with capacitors for safeguarding the plant status
SITOP UPS1600 with battery modules for maximum buffering time
When a plant shutdown is unavoidable, applications such as PC-based automation, visualization, and the archiving of operational data are especially in need
of longer bridging times. Logging the failure, saving the plant status data, and
powering down the PC in a controlled manner may require buffering times of
up to a period of minutes. SITOP DC UPSs with highly-capacitive double-layer
capacitors store sufficient energy to shut down PC-based systems safely.
Applications with powerful 24-V loads and processes in which plant sections
must continue to be supplied with power in order to record measurement data
or maintain communication channels all require high-capacity energy buffers.
The SITOP DC UPS with maintenance-free lead batteries offers optimal security
during long buffering times. Depending on the power requirements, it can
supply power for up to a period of hours.
The first open, system-integrated DC UPS
The new UPS1600 automatically detects the UPS1100 battery modules and
ensures optimum temperature-controlled charging. It can be easily integrated
into the PC or PLC environment via Ethernet/PROFINET. The UPS 1600 is the
first UPS that is fully integrated in TIA.
This makes engineering in the TIA portal convenient. In addition, S7 function
modules allow simple integration into STEP7 user programs and faceplates
allow integration into operation and monitoring with SIMATIC panels and
SIMATIC WinCC.
23
Uninterruptible power supplies –
SITOP UPS500 maintenance-free DC UPS with capacitor technology
Technical data
Maintenance-free DC UPS
SITOP
UPS500S – basic unit 15 A
Energy
2.5 kWs
Order No.
6EP1933-2EC41
UPS501S – expansion module
UPS500P – basic unit 7 A, degree of protection IP65
5 kWs
5 kWs
5 kWs
6EP1933-2EC51
6EP1935-5PG01
6EP1933-2NC01
6EP1933-2NC111)
Input voltage
24 V DC, 22…29 V, infeed from SITOP 24 V
Infeed from basic unit
24 V DC, 22.5…29 V, infeed from SITOP 24 V
Rated input current
15.2 A + approx. 2.3 A in charging mode
7 A + approx. 2 A in charging
mode
Rated output voltage
In buffer and normal mode 24 V DC +/–3 %
Rated output current
15 A, charging current 1 A (factory setting)
or 2 A selectable
Description: expansion module
for extending the buffering
time, up to 3 units can be
switched in parallel with one
UPS500S basic unit
Efficiency at rated values, approx.
97.5 %
Overload and short-circuit protection
Electronic, automatic restart
Parallel switching
No
Radio interference suppression
(EN 55022)
Class B
Degree of protection (EN 60529)
In buffer mode and normal mode 24 V DC +/–3 %
7 A, charging current 2 A
96.5 %
Electronic, automatic restart
Yes, up to 3 units
No
No
Class B
Class B
Class B
Class B
IP20
IP20
IP20
IP65
IP65
Ambient temperature
0…+60 °C
0…+60 °C
0…+60 °C
0…+55 °C
0…+60 °C
Installation
DIN rail
DIN rail
DIN rail
Screw mounting in all mounting positions
Dimensions (WxHxD) in mm
120 x 125 x 125
120 x 125 x 125
70 x 125 x 125
400 (without connector)
x 80 x 80
470 (without connector)
x 80 x 80
Weight approx.
1.0 kg
1.0 kg
0.7 kg
1.9 kg
2.2 kg
Certification
CE, cULus, ATEX, cCSAus Class I Div 2, GL, ABS, CB
Connector set with input and output connector as well as prepared USB cable in 2 m length: Order no. 6EP1975-2ES00
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
1)
24
10 kWs
1)
CE
Buffering times and charging times
SITOP UPS500
SITOP UPS500S/501S configurations
Basic unit
UPS500P
2.5 kWs
5 kWs
2.5 kWs
5 kWs
2.5 kWs
5 kWs
2.5 kWs
5 kWs
5 kWs
10 kWs
–
–
1 x 5 kWs
1 x 5 kWs
2 x 5 kWs
2 x 5 kWs
3 x 5 kWs
3 x 5 kWs
–
–
2.5 kWs
5 kWs
7.5 kWs
10 kWs
12.5 kWs
15 kWs
17.5 kWs
20 kWs
5 kWs
10 kWs
0.5 A
134 sec
236 sec
390 sec
478 sec
632 sec
748 sec
851 sec
1007 sec
284 sec
647 sec
0.8 A
90 sec
167 sec
266 sec
346 sec
440 sec
527 sec
580 sec
706 sec
190 sec
435 sec
1 A
75 sec
138 sec
219 sec
296 sec
365 sec
414 sec
490 sec
572 sec
153 sec
351 sec
2 A
38 sec
76 sec
122 sec
156 sec
203 sec
230 sec
265 sec
306 sec
80 sec
152 sec
3 A
26 sec
52 sec
82 sec
106 sec
136 sec
159 sec
186 sec
213 sec
53 sec
108 sec
Expansion modules
Total energy
Buffering times
Load current
4 A
19 sec
39 sec
61 sec
81 sec
101 sec
120 sec
139 sec
160 sec
40 sec
84 sec
5 A
15 sec
31 sec
49 sec
65 sec
81 sec
95 sec
111 sec
130 sec
30 sec
68 sec
6 A
12 sec
26 sec
40 sec
55 sec
67 sec
80 sec
94 sec
106 sec
25 sec
57 sec
49 sec
7 A
10 sec
21 sec
34 sec
47 sec
58 sec
69 sec
81 sec
82 sec
21 sec
8 A
8 sec
18 sec
29 sec
40 sec
50 sec
59 sec
69 sec
79 sec
–
–
10 A
6 sec
15 sec
23 sec
32 sec
39 sec
47 sec
54 sec
62 sec
–
–
12 A
4 sec
12 sec
19 sec
26 sec
32 sec
38 sec
44 sec
52 sec
–
–
15 A
3 sec
9 sec
14 sec
20 sec
25 sec
30 sec
35 sec
40 sec
–
–
2 A
54 sec
120 sec
158 sec
223 sec
263 sec
318 sec
355 sec
417 sec
130 sec
360 sec
1 A
110 sec
205 sec
311 sec
425 sec
503 sec
625 sec
695 sec
816 sec
–
–
Charging times
Charging current
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
25
Uninterruptible power supplies
SITOP DC UPS with battery modules for bridging longer power failures
new!
new!
Technical data
26
new!
new!
SITOP DC UPS, for longer power failures
SITOP
UPS1600
UPS1600
1100 UPS battery module
1100 UPS battery module
1100 UPS battery module
Output voltage / current
24 V/10 A
24 V/20 A
24 V/1.2 Ah
24 V/3.2 Ah
24 V/7 Ah
for UPS1600 10 A
for UPS1600 10 A and 20 A
for UPS1600 10 A and 20 A
6EP4131-0GB00-0AY0
6EP4133-0GB00-0AY0
6EP4134-0GB00-0AY0
6EP4136-3AB00-0AY0
6EP4136-3AB00-1AY0
6EP4136-3AB00-2AY0
Order No.
– with USB interface
– with Ethernet/PROFINET interface
6EP4134-3AB00-0AY0
6EP4134-3AB00-1AY0
6EP4134-3AB00-2AY0
Input voltage
24 V DC, 22...29 V, infeed from 24 V SITOP power supply
Recomm. end-of-charge voltage: 26.4…27.3 V DC (> +20 °C), 27.3…29.0 V DC (< +20 °C)
automatically set by SITOP UPS1600
Rated input current
approx. 14 A at max. charging
current (3 A)
Charging current
max. 0.36 A
Rated output voltage
24 V DC (upstream SITOP device or battery), charging voltage:
27.0 V
24 V DC, 22...27.0 V DC (no-load operation)
Rated output current
– Overload behavior
(power boost for 30 ms)
– Overload behavior
(extra power for 5 s/min)
10 A, Charging current max. 3 A 20 A, Charging current max. 4 A
60 A
30 A
10 A
20 A
40 A
Not applicable
Not applicable
Not applicable
Installed battery fuse:
15 A/32 V
25 A/32 V
2 x 25 A/32 V
Yes
Yes
Yes
approx. 25 A at max. charging
(4 A)
Charging current
max. 0.96 A
Charging current
max. 2.1 A
15 A
30 A
Efficiency at rated values, approx.
> 97.3 %
> 97.5 %
Overload and shortcircuit
protection
Yes, restart in normal mode
Parallel switching
No
No
Radio interference suppression
(EN 55022)
Class B
Class B
Degree of protection (EN 60529)
IP20
IP20
IP00
IP00
IP00
Ambient temperature
–25...+70 °C
(Derating from +60 °C)
–25...+70 °C
(Derating from +60 °C)
–10…+50 °C
–10…+50 °C
–10…+50 °C
Installation
DIN rail
DIN rail
DIN rail or wall mounting
Dimensions (WxHxD) in mm
50 x 125 x 125
50 x 125 x 125
89 x 130 x 107
190 x 169 x 79
186 x 168 x 110
Weight approx.
0.4 kg without interface, 0.42 kg with USB, 0.45 kg
with Ethernet/PROFINET interfaces
1.8 kg
3.2 kg
6.1 kg
Certification
CE, cULus, CB, ATEX, pending: cCSAus Class I Div 2, GL, ABS
Technical data subject to nominal input voltage value and +25 °C ambient temperature (unless stated otherwise)
Wall mounting
Selection table battery modules
and buffer times
Load current
Battery module1.2 Ah (6EP4131-0GB00-0AY0)
Battery module 3.2 Ah (6EP4133-0GB00-0AY0)
Battery module 7 Ah (6EP4134-0GB00-0AY0)
1A
34.5 min
2.6 h
5.4 h
2A
15.5 min
1h
2.6 h
3A
9 min
39.3 min
1.6 h
4A
6.5 min
27.1 min
1.2 h
6A
3.5 min
17.5 min
41 min
8A
2 min
12.1 min
28.6 min
10 A
1 min
9 min
21.8 min
12 A
–
7 min
17.3 min
14 A
–
5 min
15.1 min
16 A
–
4 min
12.5 min
20 A
–
1 min
9.1 min
Buffer time determination was based on the discharging time of new and completely charged battery modules
with a minimum battery temperature of +25 °C until DC UPS is being turned off.
27
Uninterruptible power supplies
SITOP DC UPS with battery modules for bridging longer power failures
Technical data
SITOP Output voltage /
current
Order No.
–– with serial interface
–– with USB interface
Input voltage
Rated input current
Rated output voltage
Rated output current
Efficiency at rated
values, approx.
Overload and shortcircuit protection
Parallel switching
Radio interference
suppression (EN 55022
Degree of protection
(EN 60529)
Ambient temperature
Installation
Dimensions (WxHxD)
in mm
Weight approx.
Certification
SITOP DC UPS, for longer power failures
DC UPS module
24 V/6 A
6EP1931-2DC21
6EP1931-2DC31
DC UPS modul
24 V/15 A
6EP1931-2EC21
6EP1931-2EC31
DC UPS module
24 V/40 A
6EP1931-2FC21
DC UPS battery module
24 V/1.2 Ah1)
DC UPS battery module
24 V/3.2 Ah1)
DC UPS battery module
24 V/7 Ah1)
for DC UPS module 6 A
for DC UPS module 6 A
and 15 A
6EP1935-6MD11
for DC UPS module 6 A, 15 A and 40 A
(for > 30 A to 40 A two units in parallel)
6EP1935-6ME21
6EP1935-6MF01
6EP1935-6MC01
6EP1931-2FC42
6EP1931-2EC42
6EP1931-2DC42
24 V DC, 22...29 V, infeed from 24 V SITOP power supply:
Recomm. end-of-charge voltage: 26.4…27.3 V DC (> +20 °C), 27.3…29.0 V DC
6 A + approx. 0.85 A
15 A + approx. 1 A
40 A + approx. 2.6 A
with empty battery
with empty battery
with empty battery
24 V DC (upstream SITOP device or battery), charging voltage: 27.0 V
Charging current
Charging current
max. 0.3 A
max. 0.8 A
24 V DC, 22...27.0 V DC (no-load operation)
From 24 V / 0.6 A
From 24 V/5 A
From 24 V/10 A
6 A, charging current:
15 A, charging current:
typ. 0.4 A
typ. 0.7 A
Buffer mode: 94 %,
Buffer mode: 96 %,
Standby mode: 95 %
Standby mode: 96 %
Electronic, automatic restart
40 A, charging current:
typ. 2 A
Buffer mode: 97 %,
Standby mode: 97 %
No
No
IP20
28
Charging current
max. 1.75 A
Charging current
max. 3 A
6 A
15 A
30 A
30 A
Not applicable
Not applicable
nicht zutreffend
Not applicable
No
Installed battery fuse:
7.5 A/32 V
Yes
15 A/32 V
Yes
30 A/32 V
Yes
30 A/32 V
Yes
IP20
IP20
IP00
IP00
IP00
IP00
–25…+60 °C
–25...+60 °C
–25…+60 °C
–10…+50 °C
–10…+50 °C
–10…+50 °C
–10…+50 °C
50 x 125 x 125
50 x 125 x 125
102 x 125 x 125
96 x 106 x 108
190 x 151 x 82
186 x 168 x 121
253 x 168 x 121
1.8 kg
3.2 kg
Class B
DIN rail
0.4 kg
Class B
DIN rail
0.4 kg
Class B
DIN rail
1.1 kg
DIN rail or wall mounting
Wall mounting
6.0 kg
Wall mounting
9.0 kg
CE, cULus, ATEX; cCSAus CE, cULus, ATEX; cCSAus CE, cULus, ATEX; cCSAus CE, cURus, ATEX; cCSAus CE, cURus, ATEX; cCSAus CE, cURus, ATEX; cCSAus CE, cURus, ATEX; cCSAus
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Class I Div 2, GL, ABS
Also available: High-temperature battery module 24 V / 2.5 Ah (6EP1935-6MD31) for ambient temperatures from –40 to +60 °C
Technical data subject to nominal input voltage value and +25 °C ambient temperature (unless stated otherwise)
1)
DC UPS battery module
24 V/12 Ah1)
Selection table battery modules
and buffer times
Battery module 7 Ah
(6EP1935-6ME21)
Battery module 12 Ah
(6EP1935-6MF01)
Battery module1) 2.5 Ah
(6EP1935-6MD31)
Battery module 1.2 Ah
(6EP1935-6MC01)
Battery module 3.2 Ah
(6EP1935-6MD11)
1 A
34.5 min.
2.6 h
5.4 h
9h
2h
2 A
15.5 min.
1h
2.6 h
4.6 h
1h
3 A
9 min.
39.3 min.
1.6 h
2.9 h
37.5 min.
4 A
6.5 min.
27.1 min.
1.2 h
2.2 h
27 min.
6 A
3.5 min.
17.5 min.
41 min.
1.2 h
17.6 min.
Load current
8 A
–
12.1 min.
28.6 min.
53.3 min.
12.5 min.
10 A
–
9 min.
21.8 min.
43.5 min.
8.8 min.
12 A
–
–
17.3 min.
33.3 min.
6.8 min.
14 A
–
–
15.1 min.
27.5 min.
5.1 min.
16 A
–
–
12.5 min.
23.8 min.
4.3 min.
20 A
–
–
9.1 min.
20.1 min.
–
25 A
–
–
–
12.6 min.
–
30 A
–
–
–
9.1 min.
–
35 A
–
–
–
17.1 min. (2 x 12 Ah)
–
40 A
–
–
–
13.5 min. (2 x 12 Ah)
–
High-temperature battery module for ambient temperatures from –40 to +60 °C-Batteriemodul für Umgebungstemperatur –40 bis +60 °C
Buffer time determination was based on the discharging time of new and completely charged battery modules
with a minimum battery temperature of +25 °C until decrease of the battery voltage to 21 V
(with voltage drops in the DC UPS, approx. 20.4 V DC remain for the load)
1)
29
All-round protection with a SITOP power supply system
Power
supply
Redundancy
module
Power
supply
DC UPS
Selectivity
module
24 V DC
SITOP
all-round protection à la carte
Our answers to your requirements for a reliable power supply: With the aid of
various SITOP add-on modules, you can flexibly expand your power supply system
to the point of all-round protection. Keep in mind that every power supply system
failure can shut down a plant and cost you a great deal of time and money. With
SITOP, these failures are a thing of the past.
PLC
HMI
Actuators/
sensors
24-V DC buffered
The SITOP advantages for a reliable power supply:
•In the event of power network faults or load fluctuations:
with their wide input voltage range and outstanding load characteristics,
SITOP power supply units meet the highest quality standards
•In the event of a power supply unit failure:
redundant design of the power supply system with SITOP redundancy
modules
•Protection against overloads and short circuits in the 24-V circuit:
selective disconnection of 24-V feeders with with SITOP selectivity
modules
•In the event of a power failure:
buffering of the power supply with SITOP DC UPS for up to a period
of hours bis in den Stundenbereich
•Possibilities ranging from a customized configuration to all-round
protection
30
Step 1
Step 2
Step 3
Step 1:
The appropriate power supplies are
preselected based on the user’s
technical requirements
Step 1:
The appropriate power supplies are
preselected based on the user’s
technical requirements
Step 3:
After the desired products have been
selected from the product list, these
selections can be exported or
transferred directly to the user’s
Industry Mall shopping basket
SITOP Selection Tool
Making the perfect choice
A power supply unit has to meet many different requirements, and the choice
of available solutions is correspondingly large. To reduce the time it can take
to find a suitable solution, we support your planning and design process right
from the start.
The SITOP selection tool shortens the time it takes to select not only your
power supply but also the matching uninterruptible power supply (DC UPS)
based on capacitor or battery technology. You can order the selected products
easily via the Siemens Industry Mall. And you’ll also receive further information such as product data sheets, 3D data, or circuit diagram macros for fast
and easy project planning.
The tool is available on the Internet and in the Industry Mall:
www.siemens.com/sitop-selection-tool
www.siemens.com/industrymall
31
Industrial Security
Further information
Easy selection of the suitable power supply unit with the SITOP selection tool:
www.siemens.com/sitop-selection-tool
Siemens provides automation and drive products with industrial security functions that support the secure operation of
plants or machines. They are an important component in a
holistic industrial security concept. With this in mind, our
products undergo continuous development. We therefore
recommend that you keep yourself informed with respect to
our product updates and that you use only the latest versions.
Please find further information on this subject at:
http://support.automation.siemens.com
Manuals for downloading:
www.siemens.com/sitop/manuals
You may also register for a product-specific newsletter
at this address.
More about SITOP:
www.siemens.com/sitop
Information material for downloading:
www.siemens.com/sitop-infomaterial
CAx data (2D, 3D, circuit diagram macro) for downloading:
www.siemens.com/sitop-cax
Compile all CAx data using the CAx online generator:
www.siemens.com/cax
Order electronically over the Internet using the Industry Mall:
www.siemens.com/industrymall
You can find your personal contact at:
www.siemens.com/automation/partner
Siemens AG
Industry Sector
Industry Automation
P.O. Box 48 48
90026 NUREMBERG
GERMANY
Subject to change without prior notice
Order No. E80001-A2650-P310-V3-7600
Dispo 46305
GB 130526 MI.SC.ST.XXXX.52.3.01
WS 09135.0
Printed in Germany
© Siemens AG 2014
To ensure the secure operation of a plant or machine it is also
necessary to take suitable preventive action (e.g. cell protection
concept) and to integrate the automation and drive components into a stateof- the-art holistic industrial security concept
for the entire plant or machine. Any third-party products that
may be in use must also be taken into account.
Please find further information at:
www.siemens.com/industrialsecurity
The information provided in this brochure contains merely general descriptions or
characteristics of performance which in actual case of use do not always apply as
described or which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly
agreed in the terms of contract.
All product designations may be trademarks or product names of Siemens AG or
supplier companies whose use by third parties for their own purposes could violate
the rights of the owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement