displaypac_wn15_c2d_md (165K PDF)

DisplayPac-WN15-C2D
SIDE VIEW
FRONT VIEW
BACK VIEW
BOTTOM VIEW
Measurements shown in mm
Tolerance of all dimensions is shown as follows:
0 to 30 mm ±0.1 mm, 30 to 50 mm ±0.15 mm,
50 to 120 mm ±0.2 mm, above 120 mm ±0.25 mm
2
1
4
3
6
5
7
9
1. Brightness Adjustment Knob
2. Power On Button
3. Power Reset Button
4. RS-232 Connector (optional)
5. Audio Jack
6. DVI (optional)
NOTE: This is a simplified drawing and some component
are not marked in detail. Please contact your Applications
Engineer for additional product information.
12
10
8
11
7. USB
8. RJ-45
9. VGA Out
10. RS-232 Connector
11. PS/2
12. DC IN Power Jack
©2012 Computer Dynamics, Inc. Computer Dynamics, Inc. is a division of CIMTEC
Automation. All rights reserved. Specifications are subject to change without notice.
5.12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising