Type: Project/Location: Contractor: ECS SERIES Prepared By: Date: Plastic Pictogram Exit Sign Model No.: FEATURES DIMENSIONS ∙∙ Energy efficient, long-life white LEDs consuming 4.2W at normal operation Dimensions are approximate and subject to change. ∙∙ Dual voltage input capability 120/347VAC ∙∙ Selection of AC/DC, 6 to 24VDC or self-powered using a 3.6V Nickel-Cadmium battery 2-3/16” [5.5cm] ∙∙ Automatic, temperature compensated, pulse type charger ∙∙ Low voltage disconnect prevents over discharge of battery 13-5/8” [34.5cm] ∙∙ Automatic brownout protection 5-15/16” [15cm] ∙∙ Comes standard with three pictogram legends for direction selection ∙∙ Red LED charger monitor ∙∙ Injection-molded off-white thermoplastic ABS housing ∙∙ Fast and easy installation with snap-together design ∙∙ Ceiling, wall or end mount installation 9-1/16” [23cm] ∙∙ Battery lock-out prevents discharge during installation ∙∙ CSA C22.2 no.141-10 listed ∙∙ Comes standard with one (1) year warranty < PICTO LEFT FROM HERE PICTO STRAIGHT FROM HERE PICTO > RIGHT FROM HERE POWER CONSUMPTION AND UNIT RATING MODEL AC/DC-remote Self-powered AC SPECS 120/347VAC 0.5/0.4 A DC SPECS 4.2/3.6W 6 to 24VDC Less than 1.5W Ni-Cd battery Min. 90 minutes *NOTE: The ECS Family cannot be combined with other Emergi-Lite® Products on the same emergency A.C. circuit. ORDERING INFORMATION SERIES ECS VOLTAGE -U= 120/347VAC, 6 to 24VDC -I= 120/347VAC, self-powered (90 mins) EXAMPLE: ECS-I All information and specifications contained in this catalogue sheet are subject to change due to engineer design, errors and omissions. © 2014. Thomas & Betts Limited. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project