Planning & Design: Washers
W6761
Unit Dimensions
Technical Data
US
33-1/2"–34-1/2"
23-7/16"
23-7/16"
42-17/32"
174 lb
HEIGHT
WIDTH
DEPTH
DEPTH W/DOOR OPEN
WEIGHT
METRIC
850–876 mm
595 mm
595 mm
1080 mm
79 kg
Supply voltage
Water Pressure
Heating element
Internal Fuse
Power cord
(attached)
Single-phase
230 V, 60 Hz
15-146 psi
2000 W
15 A
220 V, 20 Amp
Every ASKO washer is delivered ready-fitted with a plug
and is intended for connection to an ASKO dryer, which
is equipped with a matching receptacle. If the washer is
used separately or with another dryer, it must be on a
separate 220 V, 20 Amp single-phase circuit.
Second-floor (above grade) installations must meet all
local building codes.
When placing the washer next to a wall or cabinet, be
sure to leave 1/2" (12 mm) of space between the
washer and the wall or cabinet.
See pages 26–27 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and
under-cabinet installations.
Planning & Design: Combination Washer/Dryer
WCAM1812
Unit Dimensions
Technical Data
US
33-1/4"
23-3/8"
23-1/8"
38-3/4"
195 lb
HEIGHT
WIDTH
DEPTH
DEPTH W/DOOR OPEN
WEIGHT
23-3/8"
594 mm
METRIC
845 mm
594 mm
587 mm
984 mm
88 kg
38-3/4"
984 mm
Water Pressure
Heating element
Power cord
(attached)
6-5/8"
168 mm
5-5/8"
143 mm
3-5/8"
92 mm
D
ho rai
se n
33-1/4"
845 mm
Po
co we
rd r
23-1/8"
587 mm
Supply voltage
4-1/2"
102 mm
23
Specifications are subject to change without notice. See installation instructions for additional details.
Single-phase
115 V, 60 Hz
15-142 psi
1400 W on dryer
1200 W on washer
115 V, 15 Amp
">
