Danfoss RS485, FTT10, AKA 243A 243A, AKA 243B 243B bridges & repeaters Instructions
Below you will find brief information for bridges & repeaters RS485, bridges & repeaters FTT10, bridges & repeaters AKA 243A, bridges & repeaters AKA 243B. This document provides instructions on the correct installation of the data communications cable. It is important to connect terminal A to terminal A and terminal B to terminal B.
advertisement
▼
Scroll to page 2
Instructions LON, RS485 / FTT10 Det er vigtigt at installationen af datakommunikationskablet udføres korrekt. Se separat litteratur nr. RC.8A.C.. The correct installation of the data communication cable is highly important. Please refer to separate literature no. RC.8A.C.. Der korrekten Installation des Datenkommunikationskabels muß besondere Aufmerksamkeit geschenkt werden. Siehe Ergänzungsliteratur Nr. RC.8A.C.. L'installation correcte du câble de transmission est essentielle. Voir la documentation spéciale RC.8A.C.. Es muy importante la correcta instalación del cable de comunicación de datos. Ver documentación separada RC.8A.C.. L’installazione corretta del cavo di comunicazione dati è estremamente importante. Prego fare riferimento al documento n° RC.8A.C.. Bridge FTT10->RS485 RS485->FTT10 FTT10 084B2255 R = 120 ohm = Sort / Black / Schwarz / Noir / Negro / Nero RI.8B.D3.67 ® RI.8B.D4.67 12-2001 Repeater RS 485 - RS 485 (Use 2 x 084B2255) (FTT10) 084B2255 084B2255 R = 52,3 ohm = Gul / Yellow / Gelb / Jaune / Amarillo / Giallo R = 120 ohm = Sort / Black / Schwarz / Noir / Negro / Nero Repeater FTT10 - FTT10 (Use 2 x 084B2255) (AKA 243A) 084B2255 - Terminal A skal forbindes til terminal A og terminal B til B. - Klemme A muß mit Klemme A und Klemme B mit B verbunden werden. (RS485) - Terminal A must be connected to terminal A, and terminal B to B. 084B2255 - Relier sans faute la borne A à la borne A, la borne B à la borne B. - Terminal A debe conectarse a terminal A, y terminal B a B. - Il morsetto A deve essere collegato al morsetto A ed il morsetto B al morsetto B. 2 Instruction RI.8B.D4.67 © Danfoss RC-ET R = 52,3 ohm = Gul / Yellow / Gelb / Jaune / Amarillo / Giallo R = 120 ohm = Sort / Black / Schwarz / Noir / Negro / Nero 12/2001 RS485 / FTT10
advertisement
Key Features
- Terminal A must be connected to terminal A, and terminal B to B
- The correct installation of the data communication cable
- The correct installation of the data communications cable is highly important. Please refer to separate literature no. RC.8A.C..
Frequently Answers and Questions
How important is the correct installation of the data communication cable?
The correct installation of the data communication cable is highly important. Please refer to separate literature no. RC.8A.C..
What should I connect terminal A to?
Terminal A must be connected to terminal A, and terminal B to B.
What should I connect terminal B to?
Terminal A must be connected to terminal A, and terminal B to B.
Related manuals
Download
PDF
advertisement