Canon MG7720 PIXMA Multifunction printer User manual
Below you will find brief information for Multifunction printer PIXMA MG7720. The PIXMA MG7720 is a wireless multifunction printer that lets you print, scan, copy, and fax documents and photos. It features a 4.3-inch touchscreen display, automatic document feeder, and a variety of connectivity options including wireless, Ethernet, and USB.
advertisement
Installing Your Multifunction to
Your Network
PIXMA
MG7720
Mac OS
1
Setup and Installation
S etup and Installation
The instructions contained in this document apply equally to first-time installations, adding the printer to additional computers in the
Wireless Network and for re-installations after a Router or Network change.
To use the machine wirelessly with a computer, the printer must be connected to the Wireless LAN and software including the drivers needs to be copied (installed) to the computer's hard disk. Installation time varies depending on the computer environment or the number of application software to be installed.
IMPORTANT
• Log on as the administrator (or a member of the Administrators group).
• Quit all running applications before software installation.
• Do not switch users during the installation process.
• Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
• It may be necessary to restart your computer during the installation process. Follow the on-screen instructions
.
. The installation resumes once your computer has restarted.
• If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.
2
Connecting to the Wireless LAN
Prior to installing drivers and printer software, the printer must be connected to the Wireless LAN.
Start Cableless setup on the Printer
1. If the HOME button is lit, tap it.
2. Flick the touchscreen left or right, then tap LAN settings.
3
Connecting to the Wireless LAN
3. Tap Wireless LAN setup.
4. Tap Cableless setup.
4
Connecting to the Wireless LAN
5. Tap OK.
6.
Continue to the remainder of the setup beginning on the next page to set up the connection with the
Wireless Network and computer, and to install drivers and Software applications
5
Connecting to the Wireless LAN
To use the machine wirelessly with a computer, the printer must be connected to the Wireless LAN and software including the drivers needs to be copied (installed) to the computer's hard disk.
Installation time varies depending on the computer environment or the number of application software to be installed.
A number of warning messages may appear during installation. Check each message, and then click
Open or Always Allow.
To continue with the setup, go to the Mac OS Setup page , read the information* then click the Download button on that page.
*Note the instruction that if the setup does not start automatically after download, to execute
(double-click) the downloaded .
dmg file.
6
Connecting to the Wireless LAN
Click Next on the helper tool screen.
7
Connecting to the Wireless LAN
Enter your Password and click Install Helper.
8
Connecting to the Wireless LAN
Click Start Setup on the Start Setup screen.
9
Connecting to the Wireless LAN
C ontinue following on-screen instructions until the Select Connection Method screen appears. Be sure to select
Wireless LAN Connection, then click Next..
10
Connecting to the Wireless LAN
Select Connect via wireless router (recommended) then click Next.
11
Connecting to the Wireless LAN
On the Printers on Network List verify your printer is selected by checking the listing in the Serial Number column. This will show the last 5 digits of the printer's serial number. The serial number is found on a sticker on the back of the printer near the bottom. Click Next.
12
Connecting to the Wireless LAN
Click Next on the Connection Completed screen.
1
3
Connecting to the Wireless LAN
Select the MG7700 series and click Next on the Select the printer to be used screen.
14
Connecting to the Wireless LAN
Click Add Printer on the Add Printer screen.
15
Connecting to the Wireless LAN
On the Add screen, select the MG7700 series with Canon IJ Network listed in the Kind column. Click Add.
16
Connecting to the Wireless LAN
Click Next on the Add Printer screen.
17
Installing the Drivers & Software
Continue to follow on-screen instructions. Click Next on the Setup Complete screen.
1
8
Installing the Drivers & Software
Continue to follow the on-screen instructions. On the Software Installation List, select any of the optional software to install and click Next.
19
Installing the Drivers & Software
At this point the connection has been established and Drivers and Software have been installed. Please follow any remaining instructions to finish and exit the setup. Click Exit when the Installation completed successfully screen appears.
On the printer, tap OK on the touchscreen when the Cabless setup is completed message appears.
20
advertisement
Key Features
- Wireless connectivity
- Print, scan, copy, and fax
- 4.3-inch touchscreen display
- Automatic document feeder
- Ethernet and USB connectivity
Frequently Answers and Questions
How do I connect the printer to my wireless network?
What types of paper can I use with the printer?
How do I install the drivers for the printer?
Related manuals
advertisement